index int64 0 4.08k | text stringlengths 34 4.9k ⌀ | url stringclasses 38
values |
|---|---|---|
2,555 | IPsec VPN
Example
In this example, FortiGates A and B are in an HA cluster, so the serial numbers will not exchange after failover. The
cluster is connected to FortiGate D through IPsec VPN.
To securely exchange serial numbers between the FortiGates:
1. Configure the IPsec settings on FortiGate A.
a. Configure the phas... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,556 | IPsec VPN
set remote-gw 172.16.200.1
set psksecret **********
next
end
b. Configure the phase 2 interface settings:
config vpn ipsec phase2-interface
edit "to_FGTA"
set phase1name "to_FGTA"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set src-addr-type name
set d... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,557 | IPsec VPN
tun_id: 172.16.200.1/::172.16.200.1
remote_location: 0.0.0.0
network-id: 0
created: 723s ago
peer-id: 172.16.200.1
peer-id-auth: no
peer-SN: FG200E4Q17904575
IKE SA: created 1/1 established 1/1 time 10/10/10 ms
IPsec SA: created 0/0
id/spi: 7 a8b2df203ef134e8/955fafbd10a04fa0
direction: responder
status: esta... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,558 | IPsec VPN
# diagnose vpn ike gateway list
vd: root/0
name: to_FGTA
version: 2
interface: port2 10
addr: 172.16.200.4:500 -> 172.16.200.1:500
tun_id: 172.16.200.1/::172.16.200.1
remote_location: 0.0.0.0
network-id: 0
created: 132s ago
peer-id: 172.16.200.1
peer-id-auth: no
peer-SN: FG200E4Q17904575
PPK: no
IKE SA: creat... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,559 | IPsec VPN
overlays are working. The backup overlay can monitor all of the primary overlays, and is not activated until the number of
unhealthy primary overlays equals or surpasses the predefined threshold.
config vpn ipsec phase1-interface
edit <phase-1 name>
set monitor <overlay> <overlay> ... <overlay>
set monitor-mi... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,560 | IPsec VPN
edit "T4"
set interface "port15"
set ike-version
2
set peertype any
set net-device disable
set proposal aes128-sha256
set remote-gw 172.16.209.2
set psksecret **********
next
edit "T5"
set interface "vlan200"
set ike-version
2
set peertype any
set monitor "T1" "T2" "T3" "T4"
set monitor-min
4
set net-device d... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,561 | IPsec VPN
set ip 100.1.1.1 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 100.1.1.2 255.255.255.0
set snmp-index 113
set interface "dmz"
next
edit "T2"
set vdom "root"
set ip 100.1.2.1 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 100.1.2.2 255.255.255.0
set snmp-index 114
set i... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,562 | IPsec VPN
To configure steering traffic with SD-WAN:
1. Configure the SD-WAN:
config system sdwan
set status enable
config zone
edit "virtual-wan-link"
next
end
config members
edit 1
set interface "T1"
next
edit 2
set interface "T2"
next
edit 3
set interface "T3"
next
edit 4
set interface "T4"
next
edit 5
set interface... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,563 | IPsec VPN
Check the results:
l When both the T1 and T2 connections are down, T5 stays down as well, and traffic is load-balanced on T3 and T4
by the SD-WAN configuration:
# get vpn ipsec tunnel summary
'T2' 172.16.203.2:0 selectors(total,up): 1/0 rx(pkt,err): 0/0 tx(pkt,err): 0/0
'T3' 172.16.206.2:0 selectors(total,up)... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,564 | IPsec VPN
1.912283 T5 in 8.8.8.8 -> 172.16.205.100: icmp: echo reply
1.912351 port5 out 8.8.8.8 -> 172.16.205.100: icmp: echo reply
2.665921 port5 in 172.16.205.100 -> 8.8.8.8: icmp: echo request
2.665999 T5 out 172.16.205.100 -> 8.8.8.8: icmp: echo request
2.670209 T5 in 8.8.8.8 -> 172.16.205.100: icmp: echo reply
2.6... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,565 | IPsec VPN
This feature only works with IKE version 2, and it does not support ADVPN or NPU offloading.
To configure the TCP port for IKE/IPsec traffic:
config system settings
set ike-tcp-port <port>
end
ike-tcp-port <port> Set the TCP port for IKE/IPsec traffic (1 - 65535, default = 443).
When using TCP port 443 for IK... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,566 | IPsec VPN
In the GUI, the VPN Wizard can be used to set the IKE transport protocol.
To set the IKE transport protocol in the GUI:
1. Go to VPN > VPN Wizard.
2. Enter a Tunnel name.
3. For Select a template, select Site to Site, and click Begin.
4. Configure the Remote Site settings as required, and click Next.
5. Under... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,567 | IPsec VPN
To configure ESP encapsulation for cross-vendor interoperability:
1. Configure the IKE TCP port setting.
2. Configure the IPsec phase 1 settings and do not set fortinet-esp to enable. This is disabled by default.
3. Configure the IPsec phase 2 settings.
Example
In this example, IPsec VPN crosses over a carrie... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,568 | IPsec VPN
a. Configure the IPsec phase 1 settings:
config vpn ipsec phase1-interface
edit "spoke"
set interface "wan1"
set ike-version 2
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 aes128gcm-prfsha256 aes256gcmprfsha384 chacha20poly1305-prfsha256
set transport tcp
set fortinet-esp ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,569 | IPsec VPN
IKE will use UDP encapsulation first. If it fails to establish in 10 seconds, it will fall back to TCP. ESP packets
are encapsulated into a fake TCP header.
5. Configure the FGT_D (hub) FortiGate.
a. Configure the IPsec phase 1 settings:
config vpn ipsec phase1-interface
edit "Hub"
set type dynamic
set interf... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,570 | IPsec VPN
child: no
SK_ei: 619dfbeb679345f7-531692a72da85727
SK_er: 5b6a1625b2ce71cf-13b339289ca99b9d
SK_ai: a61818128c0d5390-b6d15cf9eb58e0f6-4e8c552e6265387b-4f79dc3acdd5d092
SK_ar: 64fb56b13ee65bd2-6ea1fb268b3ffad9-818c8e4d302a1176-c8978a8ce91d9856
PPK: no
message-id sent/recv: 11/2
QKD: no
lifetime/rekey: 86400/853... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,571 | IPsec VPN
Cross-validation for IPsec VPN
FortiOS supports a cross-validation mechanism for IPsec VPN, aimed at bolstering security and user authentication by
mitigating the risk of unauthorized access and identity spoofing. This mechanism functions by cross-checking whether
the username provided by the client matches t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,572 | IPsec VPN
vd: root/0
name: toclient_0
version: 1
interface: port8 16
addr: 173.1.1.1:4500 -> 173.1.1.2:64917
tun_id: 173.1.1.2/::10.0.0.12
remote_location: 0.0.0.0
network-id: 0
transport: UDP
created: 17s ago
xauth-user: tester2
2FA: no
peer-id: DC=com, DC=vpnfosqa, CN=Users, CN=tester2
peer-id-auth: yes
FortiClient U... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,573 | IPsec VPN
[580] __group_match-Check if vpnad01 is a group member
[586] __group_match-Group 'vpnad01- ldap-group' passed group matching
[589] __group_match-Add matched group 'vpnad01- ldap-group'(17)
[2431] fnbamd_ldap_result-Passed group matching
[239] fnbamd_comm_send_result-Sending result 0 (nid 0) for req 0x20208AC9... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,574 | IPsec VPN
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128gcm-prfsha256 aes256gcmprfsha384 chacha20poly1305-prfsha256
set dpd on-idle
set remote-gw 173.1.1.1
set psksecret *****************
set dpd-retryinterval 60
next
end
b. Configure the IPsec phase 2 interface:
config vpn ipsec phase2-interfac... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,575 | IPsec VPN
set client-resume-interval 120
set psksecret *****************
set dpd-retryinterval 60
next
end
b. Configure the IPsec phase 2 interface:
config vpn ipsec phase2-interface
edit "toClient"
set phase1name "toClient"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20po... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,576 | IPsec VPN
# diagnose debug application ike -1
ike V=root:0:toClient_0:9: sent IKE msg (RETRANSMIT_INFORMATIONAL): 173.1.1.1:500-
>11.101.1.1:500, len=80, vrf=0, id=e50861aebc1e5b1a/6457ea1e8512148c, oif=16
ike V=root:0:toClient_0: link is idle 16 173.1.1.1->11.101.1.1:0 dpd=1 seqno=2 rr=0
ike V=root:0:toClient_0:9: sen... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,577 | IPsec VPN
IPsec phase1 tunnel up
logid="0101037138" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132604
logdesc="IPsec connection status changed" msg="IPsec connection status change"
action="tunnel-up" remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="5b1c59fab2029e... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,578 | IPsec VPN
action="tunnel-down" remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500
outintf="port13" cookies="30820aa390687e39/886e72bf5461fb8d" user="N/A" group="N/A"
xauthuser="N/A" xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ" tunnelip=N/A
tunnelid=1530910786 tunneltype="ipsec" duration=6425 sentbyte=50... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,579 | IPsec VPN
key: bb101b9127ed5844-1582fd614d5a8a33
lifetime/rekey: 86400/85086
DPD sent/recv: 00000000/00000010
l IPsec phase2 tunnel status: diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
nname=L2tpoIPsec ver=1 serial=6 172.16.200.4:0->0.0.0.0:0 tun_id=0.0.0.0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dialup... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,580 | IPsec VPN
NP6_1:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 337152 46069
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 337152 46069
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NPU Host Offloading:
Encryption (enc... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,581 | IPsec VPN
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
l diagnose debug application ike -1
l diagnose vpn ike log filter rem-addr4 11.101.1.1
l dia... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,582 | IPsec VPN
ike 0:to_HQ:101: add INITIAL-CONTACT
ike 0:to_HQ:101: sent IKE msg (agg_i2send): 173.1.1.1:500->11.101.1.1:500, len=172,
id=dff03f1d4820222a/6c2caf4dcf5bab75
ike 0:to_HQ:101: established IKE SA dff03f1d4820222a/6c2caf4dcf5bab75
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Mo... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,583 | IPsec VPN
ike 0:to_HQ:101:to_HQ:259: protocol id = IPSEC_ESP:
ike 0:to_HQ:101:to_HQ:259: PFS DH group = 14
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 128)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA1
ike 0:to_HQ:101:to_HQ:259... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,584 | SSL VPN
Virtual Private Network (VPN) technology lets remote users connect to private computer networks to gain access to their
resources in a secure way. For example, an employee traveling or working at home can use a VPN to securely access
the office network through the internet.
Instead of remotely logging into a pr... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,585 | SSL VPN
FortiGate models Supports
SSL VPN?
FortiOS upgrade impact on SSL VPN
configuration
FortiGate models with 2GB of RAM or less No Deleted during upgrade to FortiOS 7.6.0 or
later
FortiGate models with more than 2GB of
RAM
Yes Retained after upgrade to FortiOS 7.6.0 or
later
See the FortiOS 7.6 Release Notes for in... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,586 | SSL VPN
By default, SSL VPN tunnel mode settings and the VPN > SSL-VPN menus are hidden from
the GUI.
To enable SSL VPN feature visibility in the GUI, go to System > Feature Visibility, enable SSLVPN, and click Apply.
To enable SSL VPN feature visibility in the CLI, enter:
config system settings
set gui-sslvpn enable
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,587 | SSL VPN
Full tunneling forces all traffic to pass through the FortiGate (see SSL VPN full tunnel for remote user on page 2603).
Split tunneling only routes traffic to the designated network through the FortiGate (see SSL VPN split tunnel for remote
user on page 2595).
Avoid setting all as the destination address in a f... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,588 | SSL VPN
l Firewall performance might decrease as remote usage increases.
l Highly customized web pages might not render correctly.
Security best practices
See SSL VPN security best practices on page 2589 for more information.
SSL VPN security best practices
SSL VPN settings on page 2589
l Define your minimum supported ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,589 | SSL VPN
Limit log in attempts and block duration
To prevent brute force attacks, limit log in attempts and configure the block duration:
config vpn ssl settings
set login-attempt-limit 2
set login-block-time 60
end
These values are the default values. The FortiGate will block attempts to connect to SSL VPN for 60 secon... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,590 | SSL VPN
If the FortiGate has VDOMs configured, then you can select the appropriate VDOM and repeat the steps to disable SSL
VPN for that specific VDOM.
See How to disable SSL VPN functionality on FortiGate for more information.
Disable SSL VPN web login page
A best practice is to disable the SSL VPN web login page when... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,591 | SSL VPN
The default Fortinet factory self-signed certificates are provided to simplify initial installation and testing. If you use these
certificates you are vulnerable to man-in-the-middle attacks, where an attacker spoofs your certificate, compromises
your connection, and steals your personal information. It is high... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,592 | SSL VPN
Authorization
Properly administer firewall policies and profiles against only the access level required
for the remote user
Users do not all require the same access. Access should only be granted after careful considerations. Typically, users
are placed in groups, and each group is allowed access to limited res... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,593 | SSL VPN
To limit incoming access to specific hosts based on their source IP addresses in the CLI:
config vpn ssl settings
set source-address <source address 1> ... <source address n>
set source-address-negate {disable | enable}
end
With this CLI, you can limit incoming access to hosts from specific countries by specify... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,594 | SSL VPN
3. Create a new VIP with the following settings:
l External IP address/range configured as the secondary WAN IP address, or any other WAN IP address that is
available for the WAN interface.
l IPv4 address/range configured as the IP address assigned to the loopback interface.
l Port forwarding enabled with Exter... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,595 | SSL VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface. Ensure that SSL VPN feature visibility is
enabled before starting the configuration.
The split ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,596 | SSL VPN
d. Select Source IP Pools for users to acquire an IP address when connecting to the portal. There is always a
default pool available if you do not create your own.
5. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choos... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,597 | SSL VPN
set subnet 192.168.1.0 255.255.255.0
next
end
4. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
5. Configure SSL VPN web portal.
config vpn ssl web portal
edit "my-spli... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,598 | SSL VPN
set action accept
set schedule "always"
set service "ALL"
next
end
Avoid setting all as the destination address in a firewall policy when the user or group
associated with that policy is using a portal with Split tunneling enabled. Setting all as the
destination address will cause portal to function as a full t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,599 | SSL VPN
Configuring an SSL VPN connection
To configure an SSL VPN connection:
1. On the Remote Access tab, click on the settings icon and then Add a New Connection.
2. Select SSL-VPN, then configure the following settings:
Connection Name SSLVPNtoHQ
Description (Optional)
Remote Gateway 172.20.120.123
Customize port 10... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,600 | SSL VPN
Checking the SSL VPN connection
To check the SSL VPN connection using the GUI:
1. On the FortiGate, go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
2. On the FortiGate, go to Log & Report > Forward Traffic to view the details of the SSL entry.
To check the tunnel log in using the CLI:
get... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,601 | SSL VPN
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
2. Activate the mobile token.
When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the
instructions to install your FortiToken mobile application on your device and activate your token.
Connecting from FortiClie... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,602 | SSL VPN
SSL VPN tunnel mode
The following topics provide instructions on configuring SSL VPN tunnel mode:
l SSL VPN full tunnel for remote user
l SSL VPN tunnel mode host check
l SSL VPN split DNS on page 2610
l Split tunneling settings on page 2612
l Augmenting VPN security with ZTNA tags on page 2613
l Enhancing VPN ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,603 | SSL VPN
4. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to create a tunnel mode only portal my-full-tunnel-portal.
b. Disable Split Tunneling.
5. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choose a certifica... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,604 | SSL VPN
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
5. Configure SSL VPN web portal and predefine RDP bookmark for windows server.
config vpn ssl web portal
edit "my-full-tunnel-portal"
set tunnel-mode enable
set split-tunneling disable
set ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,605 | SSL VPN
set srcaddr "all"
set dstaddr "all"
set groups "sslvpngroup"
set action accept
set schedule "always"
set service "ALL"
next
end
To see the results:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access.
3. Add a new connection:
l Set VPN Type to SSL VPN.
l Set... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,606 | SSL VPN
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,607 | SSL VPN
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system inte... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,608 | SSL VPN
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "my-split-tunnel-portal"
next
end
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network. Traffic is dropped from
internal to remote client.
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,609 | SSL VPN
SSL VPN split DNS
SSL VPN clients in tunnel mode can enable the following settings to split DNS traffic:
l Resolve DNS requests for a specific domain, or suffix, using specific DNS servers.
l Resolve all other DNS requests using a DNS server configured in the SSL VPN settings. This DNS server can be
the same as... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,610 | SSL VPN
To configure DNS split tunneling in the GUI:
1. Go to VPN > SSL-VPN Portals and double-click tunnel-access to edit the portal.
2. In the Tunnel Mode Client Options section, enable DNS Split Tunneling.
3. In the Split DNS table, click Create New. The New DNS Entry pane opens.
4. Configure the first DNS entry:
a.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,611 | SSL VPN
6. Click OK to save the portal settings.
To configure DNS split tunneling in the CLI:
config vpn ssl web portal
edit "tunnel-access"
set dns-suffix "domain0.com"
set dns-server1 10.10.10.8
set dns-server2 10.10.10.9
set split-tunneling enable
config split-dns
edit 1
set domains "domain1.com"
set dns-server1 10.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,612 | SSL VPN
To configure split tunneling in the GUI:
1. Go to VPN > SSL-VPN Portals.
2. Click Create New or Edit an existing portal.
3. Enable Tunnel Mode and select one of the Split tunneling settings.
4. Select Routing Address Override to define the destination network (usually the corporate network) that will be
routed ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,613 | SSL VPN
Feature Free VPN-only standalone
FortiClient
Licensed FortiClient
Basic VPN connection Yes Yes
Managed remote access profiles No Yes
Compliance using ZTNA tags:
l Allow or block VPN connections based
on ZTNA security posture
l Per-firewall policy security posture
checks using ZTNA tags
No Yes
For more detailed ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,614 | SSL VPN
The following process occurs when using zero-trust tagging rules with EMS and FortiClient:
1. EMS sends zero-trust tagging rules to endpoints through telemetry communication.
2. FortiClient checks endpoints using the provided rules and sends the results to EMS.
3. EMS receives the results from FortiClient.
4. E... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,615 | SSL VPN
With the default rule set logic, an endpoint would be eligible for the rule set if it is running Windows 8.1 or 10
and is part of an AD group called IT. To modify the rule set logic, do the following:
i. Click Edit Logic.
ii. Clicking Edit Logic assigns numerical values to each configured rule. You can use and ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,616 | SSL VPN
v. Click Save.
f. Click Save.
For more information about editing, deleting, and importing ZTNA rules, see Zero Trust
Tagging Rules in the FortiClient EMS Administration Guide.
Connecting FortiClient to FortiClient EMS using telemetry
After FortiClient software installation is complete on an endpoint, you can co... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,617 | SSL VPN
After FortiClient telemetry connects to EMS, FortiClient endpoints receive the ZTNA tags if they satisfy any of the
required ZTNA rules configured on the FortiClient EMS.
Monitoring ZTNA tags on the FortiGate
After the FortiGate is connected and authorized to and by FortiClient EMS, the ZTNA tags that were crea... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,618 | SSL VPN
Monitoring ZTNA tags in FortiClient and FortiClient EMS
To view the ZTNA tags assigned to the FortiClient endpoints by FortiClient EMS, click the user avatar and locate the
Zero Trust Tags section. The following FortiClient endpoint is assigned the AD-Joined tag.
Ensure that the Show Zero Trust Tag on FortiClie... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,619 | SSL VPN
For detailed descriptions of the options in the Endpoints content pane, see Viewing the Endpoints pane in the
FortiClient EMS Administration Guide.
Example: using ZTNA tags to augment VPN security
ZTNA tags can be used to augment VPN security using the following methods:
l Restrict an endpoint to connect to the... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,620 | SSL VPN
In this example, Off-net-Client is the FortiClient endpoint connected to and managed by FortiClient EMS. The telemetry
traffic passes through the FortiGate using a virtual IP. The two ZTNA rule tagging sets configured previously (AD-Joined
and Vulnerable) are applied.
Enterprise Core is the FortiGate that acts ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,621 | SSL VPN
d. Enter a message to display to users when their connection to the VPN tunnel is prohibited due to critical
vulnerabilities on their device.
e. Configure the other VPN tunnel settings as needed.
f. Click Save.
5. Configure the other remote access profile settings as needed.
6. Click Save.
After the next commun... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,622 | SSL VPN
5. Click Remote Access to try to connect to the VPN:
a. Enter the Username and Password.
b. Click Connect.
Based on the remote access profile configuration, the endpoint's access is denied due to the assigned
Vulnerable ZTNA tag. The message configured in the remote access profile appears as a notification abov... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,623 | SSL VPN
To configure the Deny Vulnerable Endpoints policy:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Configure the following settings:
Name Deny Vulnerable Endpoints
Type Standard
Incoming Interface ssl.root
Outgoing Interface port2
Source SSLVPN_TUNNEL_ADDR1, AD-Joined VPN Users
IP/MAC Based... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,624 | SSL VPN
3. Verify the forward traffic log:
a. In the GUI, go to Log & Report > Forward Traffic.
b. In the CLI, enter the following:
# execute log filter category 0
# execute log filter field policyname "Deny Vulnerable Endpoints"
# execute log display
date=2023-10-24 time=17:04:19 eventtime=1698192258985043569 tz="-070... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,625 | SSL VPN
Destination DMZ Subnet
Schedule always
Service ALL
Action ACCEPT
Log Allowed Traffic Enable this setting and select All Sessions.
Enable this policy Enable this setting.
3. Configure the other settings as needed.
4. Click OK.
To verify the configuration using an off-net client with an AD-Joined tag:
1. On the e... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,626 | SSL VPN
37db-51ee-162f-5fed6735b06e" dstuuid="2e024fe8-57d2-51ee-73a7-63e15a078456"
srccountry="Reserved" dstcountry="Reserved" sessionid=6656 proto=6 action="accept"
policyid=5 policytype="policy" poluuid="8393d776-72b0-51ee-b955-68588258f38d"
policyname="SSL VPN to DMZ" user="markgilbert" group="AD-Joined VPN Users"
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,627 | SSL VPN
To enable SSL VPN feature visibility in the CLI:
config system settings
set gui-sslvpn enable
end
By default, SSL VPN web mode settings are disabled and hidden from the GUI and the CLI.
To enable SSL VPN web mode:
config system global
set sslvpn-web-mode enable
end
If this setting is disabled, even though SSL V... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,628 | SSL VPN
l The Bookmarks widget includes links to network resources (administrator-defined bookmarks), and users can
create their own bookmarks.
l The Quick Connection dropdown menu enables a connection to network resources without using or creating a
bookmark.
The following topics provide information about SSL VPN web ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,629 | SSL VPN
GUI option Description
destination of the configured firewall policies will
be directed over the SSL VPN tunnel.
l Enabled for Trusted Destinations: only client traffic
that does not match explicitly trusted destinations
will be directed over the SSL VPN tunnel.
Routing Address Override When Split tunneling is ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,630 | SSL VPN
GUI option Description
Allow client to keep
connections alive
When enabled and if the user selects this option,
FortiClient will try to reconnect once it detects that the
VPN connection is unexpectedly down (not manually
disconnected by the user).
DNS Split Tunneling When enabled, the Split DNS table is visible... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,631 | SSL VPN
GUI option Description
Predefined Bookmarks Use the table to create and edit predefined bookmarks.
See To create a predefined administrator bookmark in
FortiOS: on page 2635 for more details.
FortiClient Download Enable this option to display the Download FortiClient
button.
Download Method Select either Direct... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,632 | SSL VPN
In a VNC session, to send Ctrl+Alt+Del, press F8 then select Send Ctrl-Alt-Delete.
RDP sessions
Some Windows servers require that a specific security be set for RDP sessions, as opposed to
the standard RDP encryption security. For example, Windows 10 requires that TLS be used.
You can specify a location option ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,633 | SSL VPN
To access a destination without adding a bookmark to the Your Bookmarks list, use the Quick
Connection tool. See Quick Connection tool on page 2632 for more details.
Configuring bookmarks
The following table summarizes which options can be configured based on the bookmark type in the SSL VPN web
portal:
Setting... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,634 | SSL VPN
Setting HTTP/
HTTPS
FTP SMB SFTP RDP VNC SSH Telnet
Preconnection ID ✔
Preconnection Blob ✔
Load Balancing Information ✔
Restricted Admin Mode ✔
* = This setting can only be configured by an administrator.
To create a user bookmark in the web portal:
1. In the Personal Bookmarks section, click Create new bookma... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,635 | SSL VPN
end
next
end
SSL VPN web mode for remote user
This is a sample configuration of remote users accessing the corporate network through an SSL VPN by web mode
using a web browser.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,636 | SSL VPN
a. In the GUI:
i. Go to System > Feature Visibility.
ii. In the Core Features section, enable SSL-VPN.
iii. Click Apply.
b. In the CLI:
config system settings
set gui-sslvpn enable
end
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the intern... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,637 | SSL VPN
Do not set the virtual IP addresses as the destination address in a firewall policy when using
SSL VPN web mode, as it will result in no destination address being accessible. Please note
that the FortiOS SSL VPN web mode does not support mapping the virtual IP to the actual
one.
To configure SSL VPN using the C... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,638 | SSL VPN
set logon-user "your-windows-server-user-name"
set logon-password your-windows-server-password
next
end
next
end
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,639 | SSL VPN
Customizing the RDP display size
The RDP display size (width and height settings) can be customized for SSL VPN web mode when creating a new
connection or bookmark. Administrators can also specify the display size when preconfiguring bookmarks.
To configure the default window dimensions in an RDP web portal:
co... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,640 | SSL VPN
3. Set the Resolition width and height fields as required.
a. Windows 7: 1360 width and 768 height.
b. Ubuntu 20.04: 800 width and 600 height.
4. Click Save.
Verification:
When the user connects to the RDP servers using the bookmarks, the customized screen resolutions are applied
regardless of the client PC's s... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,641 | SSL VPN
Ubuntu 20.04:
To view the bookmarks created by the user:
show vpn ssl web user-bookmark
config vpn ssl web user-bookmark
FortiOS 7.6.2 Administration Guide 2642
Fortinet Inc. | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,642 | SSL VPN
edit "rdp_user#"
config bookmarks
edit "RDP_win7"
set apptype rdp
set host "172.18.58.94"
set port 3389
set logon-user "fosqa"
set logon-password ********
set color-depth 32
set width 1360
set height 768
next
edit "RDP_ubuntu"
set apptype rdp
set host "172.18.58.109"
set port 3389
set logon-user "auto"
set logo... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,643 | SSL VPN
b. Enable Web Mode.
c. Click OK.
2. Set the language preference:
a. Go to VPN > SSL-VPN Settings.
b. Under Web Mode Settings, set Language to Browser Preference.
c. Click Apply.
3. Add the sslvpnadmin user to the policy used by the SSL VPN portal.
4. Confirm that the configuration works:
l When the user on PC1 ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,644 | SSL VPN
The landing page can accept SSO credentials as well as SSO from form data. This allows administrators to streamline
web application access for their users. The custom redirected portal has a logout button so that when users log out from
the web application, they are also logged out from the SSL VPN web connecti... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,645 | SSL VPN
config vpn ssl settings
set servercert "fgt_gui_automation"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set port 1443
set source-interface "port1"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 2
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,646 | SSL VPN
iv. Enable SSO Credentials and select Alternative.
v. Enable SSO form data and enter the form keys and values.
e. Click OK.
3. Configure the SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Set Listen on Interface(s) to port1.
c. Set Listen on Port to 1443.
d. Set Server Certificate to fgt_gui_automation.
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,647 | SSL VPN
d. Enable Log Allowed Traffic and set it to All Sessions.
e. Click OK.
Once the SSL VPN web portal is configured, the connected user can access FGT_B through the FGT_A SSL VPN web
portal.
To access FGT_B through the FGT_A SSL VPN web portal:
1. Enter your SSO credentials in the SSL VPN login fields.
The landing... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,648 | SSL VPN
l SSL VPN with RADIUS on Windows NPS on page 2694
l SSL VPN with multiple RADIUS servers on page 2699
l SSL VPN with local user password policy on page 2708
l Dynamic address support for SSL VPN policies on page 2713
l SSL VPN multi-realm on page 2722
l NAS-IP support per SSL-VPN realm on page 2727
l SSL VPN wi... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,649 | SSL VPN
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
3. Configure the LDAP user:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Specify Name and Server IP/Name.
c. Specify Comm... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,650 | SSL VPN
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,651 | SSL VPN
6. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
7. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,652 | SSL VPN
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the ldu1 credentials.
To check the SSL VPN connection using the GUI:
1.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,653 | SSL VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,654 | SSL VPN
g. For Certificate, select LDAP server CA LDAPS-CA from the list.
h. To enable the password-renew option, use these CLI commands.
config user ldap
edit "ldaps-server"
set password-expiry-warning enable
set password-renewal enable
next
end
4. Configure user group:
a. Go to User & Authentication > User Groups to ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.