hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1 Handover for RedCap | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.0.1 Minimum conformance requirements for NR FR2 – NR FR2 handover | The purpose of NR handover is to change the NR PCell to another NR cell for RedCap UE. The requirements in this clause are applicable to SA NR.
Handover for a RedCap UE is defined as intra-frequency handover if the center frequency and subcarrier spacing (SCS) of the reference SSB of the serving cell is same as the cen... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1 NR SA FR2 handover with unknown target cell for 2 Rx UE | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz.
- UE PC3.
- The test is incomplete for UE power classes other than PC3
- The test is incomplete for test frequencies > 40.8 GHz |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.1 Test purpose | To verify the requirement for the NR FR2 intra frequency handover requirements specified in TS 38.133 [6] clause 6.1D.1.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.2 Test applicability | This test applies to all types of NR RedCap UE with 2Rx from Release 17 onwards and supporting FR2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 17.3.1.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.1.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.1.2.4.1 with following exceptions:
- Table 7.3.1.2.4.1-1 is replaced by Table 17.3.1.1.4.1-1;
- Table 7.3.1.2.4.1-2 is replaced by Table 17.3.1.1.4.1-2;
- Table 7.3.1.2.4.1-3 is replaced by Table 17.3.1.1.4.1-3;
Table 17.3.1.1.4.1-1: Supported test configurations
Table... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.4.2 Test procedure | Same as the test procedure given in clause 7.3.1.2.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.4.3 Message contents | Same as the message contents given in 7.3.1.2.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.1.5 Test requirements | Same as the test requirements given in clause 7.3.1.2.5 with following exceptions:
- Table 7.3.1.2.5-1 is replaced by Table 17.3.1.1.5-1.
Table 17.3.1.1.5-1: Cell-specific test parameters (NR Cell 1)
Parameter
Unit
Cell 1
Cell 2
T1
T2
T1
T2
Assumption for UE beamsNote 6
Rough
Rough
AoA setup
Setup 1 as defined in A.9
N... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2 NR SA FR2-FR2 handover with unknown target cell for 2 Rx UE | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz.
- UE PC3.
- The test is incomplete for UE power classes other than PC3
- The test is incomplete for test frequencies > 40.8 GHz17.3.1.2.1 Test purpose
To verify the requirement for the NR FR2 NCD-SSB to NR ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.2 Test applicability | This test applies to all types of NR RedCap UE with 2 Rx from Release 17 onwards and supporting FR2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 17.3.1.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.1.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.4 Test description | The test scenario comprises of two carriers and one cell on each carrier. No gap patterns are configured in the test case. The test consists of two successive time periods, with time durations of T1, T2 respectively.
- At the start of time duration T1, the UE does not have any timing information of Cell 2.
- Starting T... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.4.1 Initial conditions | This test shall be tested using any of the test configurations in Table 17.3.1.2.4.1-1.
Table 17.3.1.2.4.1-1: Supported test configurations
Configuration
Description
17.3.1.2-1
Source cell: NR 120 kHz SSB SCS, 100 MHz bandwidth, TDD duplex mode
Target cell: NR 120 kHz SSB SCS, 100 MHz bandwidth, TDD duplex mode
Note: ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.4.2 Test procedure | 1. Ensure the UE is in State RRC_CONNECTED with generic procedure parameters Connectivity NR, Connected without release On according to TS 38.508-1 [14] clause 4.5. Establish SRB2 and DRB in the RRC Reconfiguration message. Cell 1 is the active cell and its RedCap-specific dedicated BWP is the activated BWP. The SS tra... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.4.3 Message contents | Message contents are according to TS 38.508-1 [14] clause 7.3 with the following exceptions:
Table 17.3.1.2.4.3-1: RRCReconfiguration (Step 1, 4 and 8, test procedure)
Derivation Path: Table H.3.2-2 with condition RBConfig_KeyChange
Information Element
Value/remark
Comment
Condition
RRCReconfiguration::= SEQUENCE {
cri... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.1.2.5 Test requirement | Table 17.3.1.2.5-1 defines the primary level settings including test tolerances for all tests.
Table 17.3.1.2.5-1: Cell specific test parameters
Parameter
Unit
Cell 1
Cell 2
T1
T2
T1
T2
Assumption for UE beamsNote 6
Rough
Rough
AoA setup
Setup 1 as defined in A.9.1
NR RF Channel Number
1
2
Duplex mode
TDD
TDD configura... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2 RRC connection mobility control for RedCap | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1 RRC re-establishment for RedCap | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.0 Minimum conformance requirements | The requirements in clause 7.3.2.1.0 shall apply.
The normative reference for this requirement is TS 38.133 [6] clause 6.2.1B. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1 NR SA FR2 Intra-frequency RRC Re-establishment in FR2 | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz
- UE PC3
The test is incomplete for UE power classes other than PC3 (e.g. PC7)
The test is incomplete for test frequencies > 40.8 GHz |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.1 Test purpose | To verify hat the NR intra-frequency RRC re-establishment delay in FR2 without known target cell is within the specified limits. These tests will verify the requirements in 38.133 [6] clause 6.2.1B |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.2 Test applicability | This test applies to all types of NR RedCap UEs from Release 17 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.1.0
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.1.1 |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.1.1.4.1 with following exceptions:
- Table 7.3.2.1.1.4.1-2 is replaced by Table 17.3.2.1.1.4.1-1.
Table 17.3.2.1.1.4.1-1: General test parameters
Parameter
Unit
Test configuration
Value
Comment
Initial condition
Active cell
1
Cell1
Neighbour cells
1
Cell2
Final condi... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.1.1.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.4.3 Message contents | Same as the message contents given in clause 7.3.2.1.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.1.5 Test requirement | Same as the test requirements given in clause 7.3.2.1.1.5 with following exceptions:
- Table 7.3.2.1.1.5-1 is replaced by Table 17.3.2.1.1.5-1.
Table 17.3.2.1.1.5-1: Cell specific test parameters
Parameter
Unit
Test config
Cell 1
Cell 2
T1
T2
T3
T1
T2
T3
Assumption for UE beamsNote 4
Rough
Rough
TDD configuration
1
TDD... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2 NR SA FR2-FR2 Inter-frequency RRC Re-establishment in FR2 | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz
- UE PC3
The test is incomplete for UE power classes other than PC3 (e.g. PC7)
The test is incomplete for test frequencies > 40.8 GHz |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.1 Test purpose | To verify that the NR inter-frequency RRC re-establishment delay in FR2 without known target cell is within the specified limits. These tests will verify the requirements in 38.133 [6] clause 6.2.1B |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.2 Test applicability | This test applies to all types of NR RedCap UEs from Release 17 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.1.0
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.1.2 |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.1.2.4.1 with following exceptions:
- Table 7.3.2.1.2.4.1-2 is replaced by Table 17.3.2.1.2.4.1-1.
Table 17.3.2.1.2.4.1-1: General test parameters
Parameter
Unit
Test configuration
Value
Comment
Initial condition
Active cell
1
Cell1
Neighbour cells
1
Cell2
Final condi... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.1.2.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.4.3 Message contents | Same as the message contents given in clause 7.3.2.1.2.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.2.5 Test requirement | Same as the test requirements given in clause 7.3.2.1.2.5 with following exceptions:
- Table 7.3.2.1.2.5-1 is replaced by Table 17.3.2.1.2.5-1.
Table 17.3.2.1.2.5-1: Cell specific test parameters
Parameter
Unit
Test config
Cell 1
Cell 2
T1
T2
T3
T1
T2
T3
Assumption for UE beamsNote 4
Rough
Rough
AoA setup
1
Setup 3
AoA... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3 NR SA FR2 RRC re-establishment without serving cell timing | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz
- UE PC3
- The test is incomplete for UE power classes other than PC3
- The test is incomplete for test frequencies > 40.8 GHz |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.1 Test purpose | To verify that the NR intra-frequency RRC re-establishment delay in FR2 without serving cell timing is within the specified limits. These tests will verify the requirements in clause 6.2.1B. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.2 Test applicability | This test applies to all types of NR RedCap UE from Release 17 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.1.0
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.1.3 |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.4.1 Initial conditions | Same as the initial condition given in clause 7.3.2.1.3.4.1 with following exception:
- Table 7.3.2.1.3.4.1-1 is replaced by Table 17.3.2.1.3.4.1-1
- Table 7.3.2.1.3.4.1-2 is replaced by Table 17.3.2.1.3.4.1-2
- Table 7.3.2.1.3.4.1-3 is replaced by Table 17.3.2.1.3.4.1-3
Table 17.3.2.1.3.4.1-1: Supported test configura... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.1.3.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.4.3 Message contents | Same as the message contents 7.3.2.1.3.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.1.3.5 Test requirement | Same as the test requirements given in clause 7.3.2.1.3.5 with following exceptions:
- Table 7.3.2.1.3.5-1 is replaced by Table 17.3.2.1.3.5-1.
Table 17.3.2.1.3.5-1: Cell specific test parameters
Parameter
Unit
Test configuration
Cell 1
Cell 2
T1
T2
T3
T1
T2
T3
Assumption for UE beamsNote 4
Rough
Rough
TDD configuratio... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2 Random access for RedCap | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.0.1 Minimum conformance requirements for Contention based random access | The minimum conformance requirements given in clause 7.3.2.2.0.1 are applicable for TDD RedCap UEs.
The normative reference for this requirement is TS 38.133 [6] clause 6.2.2B.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.0.2 Minimum conformance requirements for Non-Contention based random access | The minimum conformance requirements given in clause 7.3.2.2.0.2 are applicable for TDD RedCap UEs.
The normative reference for this requirement is TS 38.133 [6] clause 6.2.2B.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1 NR SA FR2 4-step RA type contention based random access for 2 Rx UE | Editor’s note: This test case is incomplete. The following aspects are either missing or not yet determined:
- The settable window for first preamble uplink power and the uplink calibration process are FFS.
- The test requirement for absolute uplink power is FFS.
- The test requirement for relative uplink power is FFS.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.1 Test purpose | To verify that the behaviour of the random access procedure is according to the requirements and that the PRACH power settings and timing are within specified limits. This test will verify the requirements in TS 38.133 [6] clause 6.2.2B.2 and Clause 7.1A.2 in an AWGN model. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.2 Test applicability | This test applies to all types of NR RedCap UE from Release 17 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.2.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.2.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.2.1.4.1 with following exceptions:
- Table 7.3.2.2.1.4.1-1 is replaced by Table 17.3.2.2.1.4.1-1.
- Table 7.3.2.2.1.4.1-2 is replaced by Table 17.3.2.2.1.4.1-2.
Table 17.3.2.2.1.4.1-1: Supported test configurations
Config
Description
17.3.2.2.1-1
NR PCell 120 kHz SSB... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.2.1.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.4.3 Message contents | Same as the message contents given in clause 7.3.2.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.1.5 Test requirement | Same as the test requirements given in clause 7.3.2.2.1.5 with following exception:
- Table 7.3.2.2.1.5-1 is replaced by Table 17.3.2.2.1.5-1.
- Table 7.3.2.2.1.5-2 is replaced by Table 17.3.2.2.1.5-2.
Table 17.3.2.2.1.5-1: General test parameters
Parameter
Unit
Test-1
Comments
SSB Configuration
SSB.1 FR2
As defined in... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2 NR SA FR2 4-step RA type non-contention based random access for 2 Rx UE | Editor’s note: This test case is incomplete. The following aspects are either missing or not yet determined:
- The settable window for first preamble uplink power and the uplink calibration process are FFS.
- The test requirement for absolute uplink power is FFS.
- The test requirement for relative uplink power is FFS.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.1 Test purpose | To verify that the behaviour of the random access procedure is according to the requirements and that the PRACH power settings and timing are within specified limits. This test will verify the requirements in TS 38.133 [6] clause 6.2.2B.2 and Clause 7.1A.2 in an AWGN model. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.2 Test applicability | This test applies to all types of NR RedCap UEs from Release 17 onwards. Additionally Test 2 is applicable to NR RedCap UEs that supports CSI-RS based Random Access Preamble. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.2.0.2.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.2.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.2.2.4.1 with following exceptions:
- Table 7.3.2.2.2.4.1-1 is replaced by Table 17.3.2.2.2.4.1-1.
- Table 7.3.2.2.2.4.1-2 is replaced by Table 17.3.2.2.2.4.1-2.
Table 17.3.2.2.2.4.1-1: Supported test configurations
Config
Description
17.3.2.2.2-1
NR PCell 120 kHz SSB... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.2.2.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.4.3 Message contents | Same as the message contents given in clause 7.3.2.2.2.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.2.5 Test requirement | Same as the test requirements given in clause 7.3.2.2.2.5 with following exception:
- Table 7.3.2.2.2.5-1 is replaced by Table 17.3.2.2.2.5-1.
- Table 7.3.2.2.2.5-2 is replaced by Table 17.3.2.2.2.5-2.
Table 17.3.2.2.2.5-1: General test parameters
Parameter
Unit
Test-1
Test-2
Comments
SSB Configuration
SSB.1 FR2
SSB.1 ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3 NR SA FR2 2-step RA type contention based random access for 2 Rx UE | Editor’s note: This test case is incomplete. The following aspects are either missing or not yet determined:
- The settable window for first preamble uplink power and the uplink calibration process are FFS.
- The test requirement for absolute uplink power is FFS.
- The test requirement for relative uplink power is FFS.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.1 Test purpose | To verify that the behaviour of the 2-step RA type random access procedure is according to the requirements and that the MsgA PRACH, MsgA PUSCH power settings and timing are within specified limits. This test will verify the requirements in TS 38.133 [6] clause 6.2.2B.2 and Clause 7.1A.2 in an AWGN model. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.2 Test applicability | This test applies to all types of NR RedCap UE from Release 17 onwards supporting 2-step RACH. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.2.0.2.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.2.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.2.3.4.1 with following exceptions:
- Table 7.3.2.2.3.4.1-1 is replaced by Table 17.3.2.2.3.4.1-1.
- Table 7.3.2.2.3.4.1-2 is replaced by Table 17.3.2.2.3.4.1-2.
Table 17.3.2.2.3.4.1-1: Supported test configurations
Config
Description
17.3.2.2.3-1
NR PCell 120 kHz SSB... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.2.3.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.4.3 Message contents | Same as the message contents given in clause 7.3.2.2.3.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.3.5 Test requirement | Same as the test requirements given in clause 7.3.2.2.3.5 with following exception:
- Table 7.3.2.2.3.5-1 is replaced by Table 17.3.2.2.3.5-1.
- Table 7.3.2.2.3.5-2 is replaced by Table 17.3.2.2.3.5-2.
Table 17.3.2.2.3.5-1: General test parameters
Parameter
Unit
Test-1
Comments
SSB Configuration
SSB.1 RedCap FR2
As def... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4 NR SA FR2 2-step RA type non-contention based random access for 2 Rx UE | Editor’s note: This test case is incomplete. The following aspects are either missing or not yet determined:
- The settable window for first preamble uplink power and the uplink calibration process are FFS.
- The test requirement for absolute uplink power is FFS.
- The test requirement for relative uplink power is FFS.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.1 Test purpose | To verify that the behaviour of the 2-step RA type random access procedure is according to the requirements and that the MsgA PRACH, MsgA PUSCH power settings and timing are within specified limits. This test will verify the requirements in TS 38.133 [6] clause 6.2.2B.2 and Clause 7.1A.2 in an AWGN model. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.2 Test applicability | This test applies to all types of NR RedCap UE from Release 17 onwards and supporting 2-step RACH. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.2.0.2.
The normative reference for this requirement is TS 38.133 [6] clause A.17.3.2.2.4. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.2.4.4.1 with following exceptions:
- Table 7.3.2.2.4.4.1-1 is replaced by Table 17.3.2.2.4.4.1-1.
- Table 7.3.2.2.4.4.1-2 is replaced by Table 17.3.2.2.4.4.1-2.
Table 17.3.2.2.4.4.1-1: Supported test configurations
Config
Description
17.3.2.2.4-1
NR PCell 120 kHz SSB... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.2.4.4.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.4.3 Message contents | Same as the message contents given in clause 7.3.2.2.4.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.2.4.5 Test requirement | Same as the test requirements given in clause 7.3.2.2.4.5 with following exception:
- Table 7.3.2.2.4.5-1 is replaced by Table 17.3.2.2.4.5-1.
- Table 7.3.2.2.4.5-2 is replaced by Table 17.3.2.2.4.5-2.
Table 17.3.2.2.4.5-1: General test parameters
Parameter
Unit
Test-1
Comments
SSB Configuration
SSB.1 RedCap FR2
As def... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3 RRC Connection Release with Redirection for RedCap | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.0.1 Minimum conformance requirements for FR2-FR2 RRC connection release with redirection | The minimum requirements given in clause 7.3.2.3.0.1 shall apply. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1 NR SA FR2-FR2 RRC connection release with redirection for 2 Rx UE | Editor’s Note: This test case has been completed for the following configurations:
- Test frequency f ≤ 40.8 GHz.
- UE PC3.
- The test is incomplete for UE power classes other than PC3
-- The test is incomplete for test frequencies > 40.8 GHz |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.1 Test purpose | To verify RRC connection release with redirection from NR to NR requirements specified in clause 6.2.3A.2.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.2 Test applicability | This test applies to all types of NR RedCap UE with 2 Rx from Release 17 onwards and supporting FR2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.3 Minimum conformance requirement | The minimum conformance requirements are specified in clause 17.3.2.3.0.1.
The normative reference for this requirement is TS 38.133 [6] A.17.3.2.3.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.4.1 Initial conditions | Same as the initial conditions given in clause 7.3.2.3.1.4.1 with following exceptions:
- Table 7.3.2.3.1.4.1-1 is replaced by Table 17.3.2.3.1.4.1-1;
- Table 7.3.2.3.1.4.1-2 is replaced by Table 17.3.2.3.1.4.1-2;
- Table 7.3.2.3.1.4.1-3 is replaced by Table 17.3.2.3.1.4.1-3;
Table 17.3.2.3.1.4.1-1: Supported test conf... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 17.3.2.3.1.4.2 Test procedure | Same as the test procedure given in clause 7.3.2.3.1.4.2. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.