hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.2.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.2.3 Test purpose | 1. To verify that in Manual Network Selection Mode Procedure, the UE presents "Other PLMN/access technology combinations" in a random order according to conformance requirement 2.4. UE requirement on measurement accuracy for PLMN selection is not specified in core specifications. Therefore, the ordering of PLMNs accord... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.2.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
All Radio Access Technology USIM fields and cells are UTRAN.
Cell
CPICH_Ec [dBm/3.84 MHz]
(FDD)
P-CCPCH_ RSCP [dBm]
(TDD)
High Quality signal
Test Channel
PLMN
Cell 1
-85
-74
Yes
1
PLMN 6
Cell 2
-80
-69
Yes
2
PLMN 7
Cell 3
-80
-69
Yes
3
PLMN 8
Cell 4
-80
-69
Y... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.2.5 Test Requirements | 1) In step c), the list shall be presented. The priority shall be as follows: PLMN 6 followed by PLMN 7, PLMN 8 and PLMN 10 in random order.
2) In step d), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 6.
3) In step f), the list shall be presented. The priority shall be as follows: PLMN ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3 PLMN selection; independence of RF level and preferred PLMN; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3.1 Definition | Test to verify that in Manual Network Selection Mode, the UE is able to obtain normal service on a PLMN which is neither the better nor a preferred PLMN and that it tries to obtain service on a VPLMN if and only if the user selects it manually. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3.3 Test purpose | 1. To verify that the selected PLMN at switch-on is the HPLMN.
2. To verify that in Manual Network Selection Mode Procedure the UE tries to obtain service on a VPLMN if and only if the user selects it manually.
3. To verify that the UE is able to obtain normal service on a PLMN which is neither the better nor a preferr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
"IMSI attach" flag in the BCCH is set to allowed.
For FDD only:
Step a-d:
Parameter
Unit
Cell 1
Cell 2
Cell 3
Test Channel
1
2
3
CPICH_Ec
dBm/3.84 MHz
-60
-70
OFF
PLMN
1
2
3
Step e-f:
CPICH_Ec
dBm/3.84 MHz
-60 -> OFF
-70
OFF
Step g-h:
CPICH_Ec
dBm/3.84 MHz
OFF... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.3.5 Test Requirements | 1) In step d), there shall be a response on Cell 1. The selected PLMN shall be PLMN 1.
2) In step f), there shall be no response from the UE within 2 min.
3) In step h), there shall be no response from the UE within 2 min.
4) In step j), there shall be a response on Cell 2. The selected PLMN shall be PLMN 2.
5) In step... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4 PLMN selection of RPLMN, HPLMN, UPLMN and OPLMN; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4.1 Definition | Test to verify that in Automatic Network Selection Mode, the UE selects PLMNs in a prioritized order. If available, the RPLMN shall be selected at switch-on, otherwise the list shall include in priority order HPLMN, User-PLMN and Operator-PLMN. The last priority in the list is "Other PLMN/access technology combinations... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.1 HPLMN (if not previously selected); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.2 Each PLMN in the "User Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.3 Each PLMN in the "Operator Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4.3 Test purpose | 1. To verify that if available, the RPLMN is selected at switch-on.
2. To verify that in Automatic Network Selection Mode Procedure, the UE selects the RPLMN, HPLMN, UPLMN and OPLMN in a prioritized order. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
"IMSI attach" flag in the BCCH is set to allowed.
Cell levels are from table 6.3 (FDD).
All Radio Access Technology USIM fields and cells are UTRAN.
In the System Information broadcast in each cell, the neighbouring cell list does not contain any cell belon... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.4.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 2.
2) In step e), the response from the UE shall be on Cell 2. The displayed PLMN shall be PLMN 1.
3) In step g), the response from the UE shall be on Cell 4. The displayed PLMN shall be PLMN 4.
4) In step j), the response from... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5 PLMN selection of "Other PLMN / access technology combinations"; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5.1 Definition | Test to verify that in Automatic Network Selection Mode, the UE selects high quality signal PLMNs in a random order.
Only UTRAN cells and a UE equipped with a USIM with Radio Access Technology fields set to UTRAN are considered. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5.3 Test purpose | 1. To verify that in Automatic Network Selection Mode Procedure, the UE selects "Other PLMN/access technology combinations" in a random order according to conformance requirement 2.4. UE requirement on measurement accuracy for PLMN selection is not specified in core specifications. Therefore, the ordering of PLMNs acco... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
All Radio Access Technology USIM fields and cells are UTRAN.
Cell
CPICH_Ec [dBm/3.84 MHz]
(FDD)
P-CCPCH_ RSCP [dBm]
(TDD)
High Quality signal
Test Channel
PLMN
Cell 1
-85
-74
Yes
1
PLMN 6
Cell 2
-80
-69
Yes
2
PLMN 7
Cell 3
-80
-69
Yes
3
PLMN 8
UE is previou... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.5.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 6.
2) In step e), the response from the UE shall be on either Cell 2 or 3. The displayed PLMN shall be the one associated with the cell on which the response was received.
3) In step g), the response from the UE shall be on eit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.6 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7 Cell reselection of ePLMN in manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7.1 Definition | Test to verify that the UE shall be able to reselect to a cell of another PLMN declared as equivalent PLMN to the registered PLMN in the manual mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7.2 Conformance requirement | B) Manual network selection mode
Once the UE has registered on a PLMN selected by the user, the UE shall not automatically register on a different PLMN unless:
i) The new PLMN is declared as an equivalent PLMN by the registered PLMN;
or,
ii) The user selects automatic mode.
References:
TS 22.011 clause 3.2.2.2B |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7.3 Test purpose | To verify that in Manual Network Selection Mode Procedure, the UE can perform cell reselection to an equivalent PLMN. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode and has successfully selected a PLMN in manual PLMN selection mode.
Cell_selection_and_reselection_quality_measure is CPICH_RSCP (FDD).
All Radio Access Technology USIM fields and cells are UTRAN.
Each cell shall include the other cells as neighbouring cells in... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.7.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 1.
2) In step e), the UE shall perform a cell reselection and Location Update or Routing Area Update to PLMN 3, which is equivalent to PLMN1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8 PLMN selection in shared network environment, Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8.1 Definition | Test to verify that when operating in automatic PLMN selection mode in shared network environment, the UE selects PLMNs in a prioritized order according to TS 23.122. Forbidden PLMNs shall not be selected. RPLMN shall be selected at switch-on, otherwise the list shall include in priority order HPLMN, User-PLMN and Oper... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8.3 Test purpose | 1. To verify that if available, the RPLMN is selected at switch-on.
2. To verify that in Automatic Network Selection Mode, the UE selects the RPLMN, HPLMN, UPLMN and OPLMN in a prioritized order.
3. To verify that forbidden PLMNs are not selected.
For all paragraphs above, it is verified that the UE behaves in accordan... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8.4 Method of test | Initial conditions
System Simulator:
Cell levels are from table 6.3 (Band I).
Cell
CPICH_
Ec [dBm/3.84 MHz]
(FDD)
Test Channel
Cell 1
-65
1
Cell 3
-70
2
Cell 5
-80
3
Cell 6
-85
4
The reference system configuration from TS 34.108 clause 6.1 is used in all cells, with modifications in the Master Information Block accordi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.8.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 6. The displayed PLMN shall be PLMN 2.
2) In step e), the response from the UE shall be on Cell 5. The displayed PLMN shall be PLMN 1.
3) In step g), the response from the UE shall be on Cell 3. The displayed PLMN shall be PLMN 5.
4) In step i), the response from... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9 PLMN selection in shared network environment, Manual Mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9.1 Definition | Test to verify that the UE can present the available PLMNs in priority order to the user when asked to do so in manual mode and that the displayed PLMNs can be selected / reselected by the user. The test is performed in shared network environment. All PLMNs shall be displayed in the list, including forbidden PLMNs and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9.2 Conformance requirement | 1. At switch on or recovery from lack of coverage
At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see clause 4.5.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9.3 Test purpose | 1. To verify that all PLMNs broadcasted in the IEs “Multiple PLMN list” are displayed to the user in Manual Selection Mode, even if present in the “forbidden PLMNs” list on the USIM.
2. To verify that the PLMN in the IE “PLMN Identity” is displayed/not displayed according to the value of the IE “MIB PLMN Identity”.
3. ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9.4 Method of test | Initial conditions
Cell levels are from table 6.3. (FDD).
Cell
CPICH_
Ec [dBm/3.84 MHz]
(FDD)
Test Channel
Cell 1
-85
1
Cell 2
-80
2
Cell 3
-75
3
Cell 4
-70
4
The reference system configuration from TS 34.108 clause 6.1 is used in all cells, with the following modifications:
Master Information Block
- MIB value tag
Set... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.9.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 2.
2) In step e), the list shall be presented. The priority shall be as follows: PLMN 1, PLMN 3, PLMN 4, PLMN 5, PLMN 6.
3) In step f), the response from the UE shall be on Cell 2. The displayed PLMN shall be PLMN 1.
4) In step... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10 Presentation of additional information during PLMN selection; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10.1 Definition | Test to verify that in Manual Network Selection Mode, the UE displays additional information about the available PLMNs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10.2 Conformance requirement | The HPLMN may provide on the SIM additional information on the available PLMNs. If this information is provided then the MS shall indicate it to the user. This information, provided as free text may include:
- preferred partner,
- roaming agreement status,
- supported services
Furthermore, the MS may indicate whether t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10.3 Test purpose | To verify that in manual network selection mode if additional information is available on the SIM/USIM about the available PLMNs that information is displayed to the user. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
"IMSI attach" flag in the BCCH is set to allowed.
Cell levels are from table 6.3 for FDD and from table 6.4 for TDD.
All Radio Access Technology USIM fields and cells are UTRAN.
In the System Information broadcast in each cell, the neighbouring cell list do... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.10.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 1.
2) In step d) the UE shall indicate:
- For PLMN1 the UE shall indicate that “PLMN1 offers voice call, SMS and PS data services.”.
- For PLMN2 the UE shall indicate that “PLMN2 offers voice call services.”.
If the UE supports... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.11 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12 Displaying EHPLMNs in manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12.1 Definition | Test to verify that in Manual Network Selection Mode, the UE is able to display HPLMN and EHPLMNs in the correct order according to the parameters provided by the USIM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12.2 Conformance requirement | 1. The MS indicates whether there are any PLMNs, which are available using all supported access technologies. This includes PLMNs in the "forbidden PLMNs" list and PLMNs which only offer services not supported by the MS. An MS which supports GSM COMPACT shall also indicate GSM COMPACT PLMNs (which use PBCCH).
If displa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12.3 Test purpose | 1. To confirm that if the EFEHPLMN (Equivalent HPLMN) data field on the USIM is present but there are no EHPLMNs available, only the HPLMN is displayed.
2. To confirm that if EHPLMNs are available and the EFEHPLMN (Equivalent HPLMN) data field on the USIM is present then depending on the USIM settings of EFEHPLMNPI (Eq... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
Cell levels are from table 6.3 for FDD and from table 6.4 for TDD.
All Radio Access Technology USIM fields and cells are UTRAN.
In the System Information broadcast in each cell, the neighbouring cell list does not contain any cell belonging to the other PLMN’s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.12.5 Test Requirements | 1) In step c), the UE shall indicate that only PLMN 1 is available.
2) If UE supports “Exception to manual network selection mode at switch-on” the response from UE shall come in step c) otherwise the response from UE shall come in step d). In both cases, the response from the UE shall be on Cell 3. The displayed PLMN ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13 PLMN selection of RPLMN or (E)HPLMN; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13.1 Definition | Test to verify that in Automatic Network Selection Mode, the UE selects PLMNs in the correct order according to the setting of EFLRPLMNSI. If EFLRPLMNSI is available and the field is set to “01”, and a non-empty EHPLMN list is present, at switch-on, the UE shall select the EHPLMN or the last RPLMN. If EFLRPLMNSI is set... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13.2 Conformance requirement | 1. Equivalent HPLMN list: To allow provision for multiple HPLMN codes, PLMN codes that are present within this list shall replace the HPLMN code derived from the IMSI for PLMN selection purposes. This list is stored on the USIM and is known as the EHPLMN list. The EHPLMN list may also contain the HPLMN code derived fro... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13.3 Test purpose | 1. To verify that the RPLMN or the EHPLMN is selected at switch-on if EFLRPLMNSI = “01”.
2. To verify that the RPLMN is selected at switch-on if EFLRPLMNSI = “00”.
3. The UE indicates the correct PLMN to the User when an EHPLMN is selected. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
"IMSI attach" flag in the BCCH is set to allowed.
All Radio Access Technology USIM fields and cells are UTRAN.
In the System Information broadcast in each cell, the neighbouring cell list does not contain any cell belonging to the other PLMN’s.
The definiti... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.13.5 Test Requirements | 1) In step c), the response from the UE shall be either:
- on Cell 1 and the displayed PLMN shall be Test Home PLMN or THPLMN or
- on Cell 4 and the UE shall indicate PLMN 2.
2) In step g), the response from the UE shall be on Cell 2 and the UE shall indicate PLMN 2.
3) In step k), the response from the UE shall be on ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14 Network selection mode at switch-on | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14.1 Definition | Test to verify that the UE uses the optional feature of user preferred PLMN selection operating mode at switch on. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14.2 Conformance requirement | 1. If there is no registered PLMN, or if registration is not possible due to the PLMN being unavailable or registration failure, the MS follows one of the following two procedures depending on its PLMN selection operating mode. At switch on, if the MS provides the optional feature of user preferred PLMN selection opera... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14.3 Test purpose | 1. To verify that the user is allowed to configure what network selection mode should be used at switch-on.
2. To verify that this information is not stored on the USIM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14.4 Method of test | Initial conditions
"IMSI attach" flag in the BCCH is set to allowed.
Cell levels are from table 6.3 for FDD and from table 6.4 for TDD.
All Radio Access Technology USIM fields and cells are UTRAN.
In the System Information broadcast in each cell, the neighbouring cell list does not contain any cell belonging to the oth... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.14.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 4. The displayed PLMN shall be PLMN4.
2) In step h), The UE does not send a response on any cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15 Exception in manual network selection mode when HPLMN is available at power-on | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15.1 Definition | Test to verify that UE in Manual Network Selection Mode at switch on, when neither the RPLMN nor any equivalent PLMN to the RPLMN is available then the UE may optional select the highest priority PLMN in the EHPLMN list or select the HPLMN if EHPLMN list is not available or empty. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15.2 Conformance requirement | 1. Equivalent HPLMN list: To allow provision for multiple HPLMN codes, PLMN codes that are present within this list shall replace the HPLMN code derived from the IMSI for PLMN selection purposes. This list is stored on the USIM and is known as the EHPLMN list. The EHPLMN list may also contain the HPLMN code derived fro... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15.3 Test purpose | 1. To verify that a UE supporting the exception to manual network selection mode when EHPLMN is available at power-on selects the highest priority available EHPLMN at switch on when the RPLMN or a PLMN equivalent to it is not available at switch-on.
2. To verify that a UE supporting the exception to manual network sele... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
UE is previously registered on PLMN2 with USIM A, before switched off.
"IMSI attach" flag in the BCCH is set to allowed.
Cell levels are from table 6.3 for FDD and from table 6.4 for TDD.
All Radio Access Technology USIM fields and cells are UTRAN.
In the Syst... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.1.15.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN2.
2) In step g), the response from the UE shall be on Cell 5. The displayed PLMN shall be PLMN5 (highest priority PLMN in EHPLMN list).
3) In step k), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLM... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2 Cell selection and reselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1 Cell reselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1.1 Definition | Test to verify that the UE performs the cell reselection correctly for intra/inter-frequency cells if the serving cell becomes barred or S<0. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1.2 Conformance requirement | 1. When camped on a cell, the UE shall regularly search for a better cell according to the cell reselection criteria. If a better cell is found, that cell is selected. The change of cell may imply a change of RAT.
2. A "suitable cell" is a cell on which the UE may camp on to obtain normal service. Such a cell shall ful... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 4.3 In all cases, the UE shall reselect the new cell, only if the following conditions are met: | - the new cell is better ranked than the serving cell during a time interval Treselection.
…
- more than 1 second has elapsed since the UE camped on the current serving cell.
5. Location Registration
In the UE, the AS shall report registration area information to the NAS.
If the UE reads more than one PLMN identity in ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1.3 Test purpose | 1. To verify that the UE performs cell reselection on the following occasions: |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 Serving cell becomes barred; | 1.2 S<0 for serving cell.
2. To verify conformance requirement 5.
NOTE: Reselection triggered by the cell becoming a part of a forbidden registration area is tested in clause 9.4.2.3 and clause 9.4.2.4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1.4 Method of test | Initial conditions
Treselection, Qhyst, Qoffset, TEMP_OFFSET and PENALTY_TIME are not used, so the cell-ranking criterion R equals CPICH_RSCP for FDD cells, and P-CCPCH RSCP for TDD cells.
Step a-c (FDD):
Parameter
Unit
Cell 1
Cell 2
Cell 4
Test Channel
1
1
2
LAC
0001
0002
0003
CPICH_Ec
dBm/3.84 MHz
-60
-67
-80
Qrxlevm... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.1.5 Test requirements | 1) In step c), after the UE has responded on Cell 1, it shall not respond on any other cell within 1 min.
2) In step e), the UE shall respond on Cell 4.
3) In step g), the UE shall respond on Cell 2.
4) In step k), after the UE has responded on Cell 1, it shall not respond on any other cell within 1 min.
5) In step m),... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2 Cell reselection using Qhyst, Qoffset and Treselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2.1 Definition | Test to verify that the UE performs the cell reselection correctly if system information parameters Qoffset, Qhyst and Treselection are applied for non-hierarchical cell structures. TEMP_OFFSET and PENALTY_TIME are only applicable when HCS is applied and are tested in clauses 6.1.2.4 and 6.1.2.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode and in TS 25.123 for TDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.3 In all cases, the UE shall reselect the new cell, only if the following conditions are met: | - the new cell is better ranked than the serving cell during a time interval Treselection.
- more than 1 second has elapsed since the UE camped on the current serving cell.
References
1. TS 25.304, clause 5.2.5.1.
2. TS 25.304, clause 5.2.6.1.4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2.3 Test purpose | 1. To verify that the UE calculates R from Qhyst and Qoffset and that the modification of these parameters on the BCCH triggers the cell reselection evaluation process. TEMP_OFFSET and PENALTY_TIME are not applied.
2. To verify that the UE reselects the new cell, if the cell reselection criteria are fulfilled during a ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2.4 Method of test | Initial conditions
For FDD only:
Step a-c:
Parameter
Unit
Cell 1
Cell 2
Test channel
1
1
LAC
0001
0002
CPICH_Ec
dBm/3.84 MHz
-60
-66
Qhyst1s
dB
20
0
Rs*
dB
-40
-66
Rn*
dB
-66
-60
Step d-e:
CPICH_Ec
dBm/3.84 MHz
-60 -> -66
-66 -> -60
Rs*
dB
-40 -> -46
-66 -> -60
Rn*
dB
-66 -> -60
-60 -> -66
Step f-g:
Qhyst1s
dB
20 -> 0
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.2.5 Test Requirements | 1) In step c), after the UE has responded on Cell 1, it shall not respond on any other cell within 1 min.
2) In step e), there shall not be any random access requests on any cell.
3) In step g), the UE shall respond on Cell 2.
4) In step j), the UE shall select a cell to camp on. In case the UE has selected Cell 2, it ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.3 HCS Cell reselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.3.1 Definition | Test to verify that the UE performs the cell reselection correctly for hierarchical cell structures. This shall be done according to the HCS priority, the received signal quality value Q and the quality level threshold criterion H. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.3.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode and in TS 25.123 for TDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.3.3 Test purpose | 1. Verify that the UE ignores cells with H<0 for reselection and that H is calculated from Qhcs. The modification of this parameter on the BCCH shall trigger the cell reselection evaluation process.
2. Verify that the UE ranks cells based on both HCS priority and R. Qhyst, Qoffset, TEMP_OFFSET, PENALTY_TIME and Tresele... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.3.4 Method of test | Initial conditions
SS shall indicate in System Information that HCS is in use.
Each cell shall include the other cells as neighbouring cells in System Information Block Type 11.
For FDD only:
Step a-c:
Parameter
Unit
Cell 1
Cell 2
Cell 3
Test channel
1
2
2
LAC
0001
0002
0003
CPICH_Ec
dBm/3.84 MHz
-70
-65
-70
HCS priori... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.4 HCS Cell reselection using reselection timing parameters for the H criterion | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.4.1 Definition | Test to verify that the UE performs the cell reselection correctly for hierarchical cell structures using TEMP_OFFSET and PENALTY_TIME applied to the H criterion. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.4.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode and in TS 25.123 for TDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.1.2.4.3 Test purpose | 1. Verify that TEMP_OFFSET is applied to the H criterion for a period of PENALTY_TIME and that the timer is started when Qmeas,n > Qhcsn if serving and neighbour cell have different HCS priorities. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.