hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.1.2 Conformance requirement | 1. At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see TS 23.122, clause 4.5.2) attempts to perform a Location Re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.1.3 Test purpose | 1. To verify that the UE selects the correct combination of HPLMN/access technology combination according to the fields on the USIM. If the UE is not using HPLMN Selector with Access Technology data field on the USIM there is no priority order for the RAT. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.1.4 Method of test | Related ICS/IXIT statements
- Access technology priority supported in HPLMNwACT field – yes/no.
Initial conditions
The UE is in automatic PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
Radio Access Technology
Cell 2
-70
-5... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.1.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN1 (GSM). If the UE is not using HPLMN Selector with Access Technology data field on the USIM or if the UE is Rel-6 or higher, the response from the UE shall be either on Cell 1 or Cell 2. The displayed PLMN shall be either PLMN1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2 Selection of RAT for HPLMN; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2.1 Definition | Test to verify that the UE selects the HPLMN RAT according to the HPLMN RAT priority list on the USIM. If no RAT on the list is available, the UE shall try to obtain registration on the same PLMN using other UE-supported RATs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2.2 Conformance requirement | 1. To allow provision for multiple HPLMN codes, the HPLMN access technologies are stored on the SIM together with PLMN codes. This version of the specification does not support multiple HLPMN codes and the "HPLMN Selector with Access Technology" data field is only used by the MS to get the HPLMN access technologies. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 3.1 HPLMN; | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 3.2 PLMNs contained in the "User Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 3.3 PLMNs contained in the "Operator Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 3.4 Other PLMN/access technology combinations with received high quality signal in random order; | 3.5 Other PLMN/access technology combinations in order of decreasing signal quality.
The user may select his desired PLMN and the MS then initiates registration on this PLMN using the access technology chosen by the user for that PLMN or using the highest priority available access technology for that PLMN, if the assoc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2.3 Test purpose | 1. To verify that:
1.1 the UE searches for a HPLMN RAT according to the HPLMN Selector with Access Technology data field on the USIM in priority order.
1.2 If no RAT on the priority list is available, the UE tries to obtain registration on the same PLMN using other UE-supported RATs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
Radio Access Technology
Cell 1
-72
-59
1
PLMN 2
UTRAN
Cell 3
-75
-64
2
PLMN 3
UTRAN
Cell
RF signal level [dBm]
Test Channel
PLMN
Radio A... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.2.5 Test Requirements | 1) In step c), the list shall be presented. It shall contain as highest priority PLMN2 (UTRAN as number 1 on the list and GSM as number 2).
2) In step d), the response from the UE shall be on Cell 1 (1st priority RAT for EFHPLMNwAcT). The displayed PLMN shall be PLMN2 (UTRAN).
3) In step f), the list shall be presented... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3 Selection of RAT for UPLMN; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3.1 Definition | Test to verify that the UE selects the UPLMN RAT according to the UPLMN RAT priority list on the USIM. If no PLMN/RAT on the UPLMN RAT priority list is available then the UE shall search for PLMNs in the OPLMN list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3.2 Conformance requirement | 1. Manual Network Selection Mode Procedure:
The MS indicates whether there are any PLMNs, which are available using all supported access technologies. This includes PLMNs in the "forbidden PLMNs" list and PLMNs which only offer services not supported by the MS.
If displayed, PLMNs meeting the criteria above are present... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 HPLMN; | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.2 PLMNs contained in the "User Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.3 PLMNs contained in the "Operator Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.4 Other PLMN/access technology combinations with received high quality signal in random order; | 1.5 Other PLMN/access technology combinations in order of decreasing signal quality.
In 1.5, the MS shall order the PLMN/access technology combinations in order of decreasing signal quality within each access technology. The order between PLMN/access technology combinations with different access technologies is an MS i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3.3 Test purpose | 1. To verify that:
1.1 the UE selects the UPLMN RAT according to the UPLMN RAT priority list on the USIM.
1.2 If no RAT on the UPLMN RAT priority list is available, the UE searches for PLMNs in the OPLMN list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
Radio Access Technology
Cell 1
-72
-59
1
PLMN 3
UTRAN
Cell 3
-75
-64
2
PLMN 4
UTRAN
Cell 5
-78
-69
3
PLMN 5
UTRAN
Cell
RF signal level [... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.3.5 Test Requirements | 1) In step c), the list shall be presented. It shall contain in priority PLMN3 (UTRAN), PLMN4 (GSM), other PLMNs.
2) In step d), the response from the UE shall be on Cell 1 (1st priority RAT for EFPLMNwAcT). The displayed PLMN shall be PLMN3 (UTRAN).
3) In step f), the list shall be presented. It shall contain in prior... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4 Selection of RAT for OPLMN; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4.1 Definition | Test to verify that the UE selects the OPLMN RAT according to the OPLMN RAT priority list on the USIM. If no PLMN/RAT on the OPLMN RAT priority list is available then the UE shall search for other PLMN/access technology combinations with received high quality signal in random order. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4.2 Conformance requirement | 1. Manual Network Selection Mode Procedure:
The MS indicates whether there are any PLMNs, which are available using all supported access technologies. This includes PLMNs in the "forbidden PLMNs" list and PLMNs which only offer services not supported by the MS.
If displayed, PLMNs meeting the criteria above are present... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4.3 Test purpose | 1. To verify that:
1.1 the UE selects the OPLMN RAT according to the OPLMN RAT priority list on the USIM.
1.2 If no PLMN/RAT on the OPLMN RAT priority list is available, the UE searches for "other PLMN/access technology combinations with received high quality signal in random order". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
Radio Access Technology
Cell 1
-72
-59
1
PLMN 5
UTRAN
Cell 3
-75
-64
2
PLMN 6
UTRAN
Cell 5
-78
-69
3
PLMN 7
UTRAN
Cell
RF signal level [... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.4.5 Test Requirements | 1) In step c), the list shall be presented. It shall contain in priority PLMN5 (UTRAN), PLMN6 (GSM), other PLMNs.
2) In step d), the response from the UE shall be on Cell 1 (1st priority RAT for EFOPLMNwAcT). The displayed PLMN shall be PLMN5 (UTRAN).
3) In step f), the list shall be presented. It shall contain as high... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5 Selection of "Other PLMN / access technology combinations"; Manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5.1 Definition | Test to verify that if neither RPLMN, HPLMN, UPLMN nor OPLMN is available, the UE tries to obtain registration on "Other PLMN/access technology combinations with received high quality signal in random order". Forbidden PLMNs shall also by displayed in the list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5.2 Conformance requirement | 1. Manual Network Selection Mode Procedure:
The MS indicates whether there are any PLMNs, which are available using all supported access technologies. This includes PLMNs in the "forbidden PLMNs" list and PLMNs which only offer services not supported by the MS.
If displayed, PLMNs meeting the criteria above are present... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5.3 Test purpose | 1. To verify that if neither RPLMN, HPLMN, UPLMN nor OPLMN is available, the UE tries to obtain registration on "Other PLMN/access technology combinations with received high quality signal in random order".
2. To verify that forbidden PLMNs are also displayed in the list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5.4 Method of test | Initial conditions
The UE is in manual PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec [dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
High Quality signal
Test Channel
PLMN
Radio Access Technology
Cell 1
-80
-74
Yes
1
PLMN 7
UTRAN
Cell 3
-80
-69
Yes
2
PLMN 9
UTRAN
Cell
RF signal level [dB... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.5.5 Test Requirements | In all steps, the PLMN priority list shall be as follows: PLMN7, PLMN8, PLMN9 and PLMN11 in random order.
1) In step c), the list shall be presented and contain PLMN7, 8, 9, 11.
2) In step d), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN7.
3) In step f), the list shall be presented and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6 Selection of RAT for HPLMN; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6.1 Definition | Test to verify that the UE selects the HPLMN RAT according to the HPLMN RAT priority list on the USIM. If no RAT on the list is available, the UE shall try to obtain registration on the same PLMN using other UE-supported RATs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6.2 Conformance requirement | 1. To allow provision for multiple HPLMN codes, the HPLMN access technologies are stored on the SIM together with PLMN codes. This version of the specification does not support multiple HLPMN codes and the "HPLMN Selector with Access Technology" data field is only used by the MS to get the HPLMN access technologies. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6.3 Test purpose | 1. To verify that:
1.1 the UE searches for a HPLMN RAT according to the HPLMN Selector with Access Technology data field on the USIM in priority order. If the UE is not using HPLMN Selector with Access Technology data field on the USIM, there is no priority order for the RAT.
1.2 If no RAT on the priority list is avail... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6.4 Method of test | Related ICS/IXIT statements
- Access technology priority supported in HPLMNwACT field – yes/no.
Initial conditions
The UE is in automatic PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
Radio Access Technology
Cell 1
-70
-5... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.6.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1 (1st priority RAT for EFHPLMNwAcT). The displayed PLMN shall be PLMN2 (UTRAN). If the UE is not using HPLMN Selector with Access Technology data field on the USIM or if UE is Rel-6 or higher, the response from the UE shall be either on Cell 1 or Cell 2. The dis... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7 Selection of RAT for UPLMN; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7.1 Definition | Test to verify that the UE selects the UPLMN RAT according to the UPLMN RAT priority list on the USIM. If no PLMN/RAT on the UPLMN RAT priority list is available then the UE shall search for PLMNs in the OPLMN list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7.2 Conformance requirement | 1. Automatic Network Selection Mode Procedure:
The MS selects and attempts registration on other PLMNs, if available and allowable in the following order: |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 HPLMN (if not previously selected); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.2 Each PLMN in the "User Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.3 Each PLMN in the "Operator Controlled PLMN Selector with Access Technology" data field in the SIM (in priority order); | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7.3 Test purpose | 1. To verify that:
1.1 the UE selects the UPLMN RAT according to the UPLMN RAT priority list on the USIM.
1.2 If no PLMN/RAT on the UPLMN RAT priority list is available, the UE searches for PLMNs in the OPLMN list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
In system information broadcast in each cell, the neighbouring cell list does not contain any other cell belonging to the same PLMN.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH [dBm] (TDD)
Test Channel
PLMN
Radio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.7.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1 (1st priority RAT for EFPLMNwAcT). The displayed PLMN shall be PLMN3 (UTRAN).
2) In step e), the response from the UE shall be on Cell 4 (2nd priority RAT for EFPLMNwAcT). The displayed PLMN shall be PLMN4 (GSM).
3) In step g), the response from the UE shall be... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8 Selection of RAT for OPLMN; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8.1 Definition | Test to verify that the UE selects the OPLMN RAT according to the OPLMN RAT priority list on the USIM. If no PLMN/RAT on the OPLMN list is available then the UE shall search for other PLMN/access technology combinations with received high quality signal in random order. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8.2 Conformance requirement | 1. Automatic Network Selection Mode Procedure:
The MS selects and attempts registration on other PLMNs, if available and allowable in the following order: |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8.3 Test purpose | 1. To verify that:
1.1 the UE selects the OPLMN RAT according to the OPLMN RAT priority list on the USIM.
1.2 If no PLMN/RAT on the OPLMN RAT priority list is available, the UE searches for "other PLMN/access technology combinations with received high quality signal in random order". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
In system information broadcast in each cell, the neighbouring cell list does not contain any other cell belonging to the same PLMN.
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
Test Channel
PLMN
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.8.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1 (1st priority RAT for EFOPLMNwAcT). The displayed PLMN shall be PLMN5 (UTRAN).
2) In step e), the response from the UE shall be on Cell 4 (2nd priority RAT for EFOPLMNwAcT). The displayed PLMN shall be PLMN6 (GSM).
3) In step g), the response from the UE shall ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9 Selection of "Other PLMN / access technology combinations"; Automatic mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9.1 Definition | Test to verify that if neither RPLMN, HPLMN, UPLMN nor OPLMN is available, the UE tries to obtain registration on "Other PLMN/access technology combinations with received high quality signal in random order". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9.2 Conformance requirement | 1. Automatic Network Selection Mode Procedure:
The MS selects and attempts registration on other PLMNs, if available and allowable in the following order: |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9.3 Test purpose | 1. To verify that if neither RPLMN, HPLMN, UPLMN nor OPLMN is available, the UE tries to obtain registration on "Other PLMN/access technology combinations with received high quality signal in random order". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9.4 Method of test | Initial conditions
The UE is in automatic PLMN selection mode.
Cell levels are from tables 6.3, 6.4 and 6.5.
Cell
CPICH_Ec [dBm/3.84 MHz] (FDD)
P-CCPCH_RSCP [dBm] (TDD)
"High Quality signal"
Test Channel
PLMN
Radio Access Technology
Cell 1
-80
-69
Yes
1
PLMN 7
UTRAN
Cell 3
-80
-69
Yes
2
PLMN 9
UTRAN
Cell
RF signal leve... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.9.5 Test Requirements | 1) In step c), the displayed PLMN is noted.
2) When the test procedure has finished, the noted PLMNs shall have appeared in the following order: PLMN7 first, then PLMN8 or PLMN9 in random order. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.10 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11 Selection of PLMN and RAT in shared network environment, Manual Mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11.1 Definition | Test to verify that the UE can present the available PLMNs in priority order to the user when asked to do so in multi-mode Shared Network environment (Manual Mode). This includes PLMNs broadcasted in UTRAN cells (IE “PLMN Identity”, UTRAN IE “Multiple PLMN list” ) and in GSM cells. The test also verifies that displayed... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11.2 Conformance requirement | 1a. At switch on or recovery from lack of coverage
At switch on, or following recovery from lack of coverage, the MS selects the registered PLMN or equivalent PLMN (if it is available) using all access technologies that the MS is capable of and if necessary (in the case of recovery from lack of coverage, see clause 4.5... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11.3 Test purpose | 1. To verify that all PLMNs available are displayed to the user in multi-mode Shared Network environment (Manual Mode). This includes for the UTRAN cells, PLMNs broadcasted in IE “PLMN Identity” and IE “Multiple PLMN list”, as well as the PLMNs broadcasted by GSM cells. The available PLMNs shall be displayed in priorit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11.4 Method of test | Initial conditions
Cell levels are from table 6.5 (GSM) and 6.3 (UTRAN FDD).
Cell
RF signal level [dBm]
Test Channel
PLMN
Radio Access Technology
Cell 9
-48
1
PLMN 9
GSM
Cell 10
-50
2
PLMN 10
GSM
Cell
CPICH_Ec
[dBm/3.84 MHz] (FDD)
Test Channel
PLMN
Radio Access Technology
Cell 1
-60
1
See below
UTRAN
Cell 4
-65
2
See b... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.1.11.5 Test Requirements | 1) In step c), the list shall be presented. The priority shall be as follows PLMN 1, PLMN 10, PLMN 9, PLMN 2, other PLMNs.
2) In step d), the response from the UE shall be on Cell 9. The displayed PLMN shall be PLMN 9. If indication of RAT is supported, the displayed PLMN shall be PLMN 9 (GSM)
3) In step f), the list s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2 Cell selection and reselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1 Cell reselection if cell becomes barred or S<0; UTRAN to GSM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1.1 Definition | Test to verify that if both a GSM and UTRAN network is available, the UE performs cell reselection from UTRAN to GSM if the UTRAN cell becomes barred or S falls below zero. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1.2 Conformance requirement | 1. When camped on a cell, the UE shall regularly search for a better cell according to the cell reselection criteria. If a better cell is found, that cell is selected. The change of cell may imply a change of RAT.
2. A "suitable cell" is a cell on which the UE may camp on to obtain normal service. Such a cell shall ful... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1.3 Test purpose | 1. To verify that the UE performs cell reselection from UTRAN to GSM on the following occasions:
1.1 Serving cell becomes barred.
1.2 S<0 for serving cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1.4 Method of test | Initial conditions
UE is idle updated on cell 1.
All cells belong to the same PLMN.
The Inter-RAT Cell Info List of Cell 1 (UTRAN) refers to Cell 9 (GSM) and Cell 10 (GSM).
The 3G Neighbour Cell Description of Cell 9 (GSM) and Cell 10 (GSM) refers to Cell 1 (UTRAN)
Step a-c:
Parameter
Unit
Cell 1
(UTRAN)
Test Channel
1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.1.5 Test Requirements | 1) In step a), after the UE has responded on Cell 1, it shall not respond on any other cell within 1 min.
2) In step e), the UE shall respond on Cell 9.
3) In step g), the UE shall respond on Cell 9 after the signal level is reduced.
6.2.2.1a Cell reselection if cell becomes barred or S<0; UTRAN(1.28Mcps TDD) to GSM
6.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2 Cell reselection if cell becomes barred or C1<0; GSM to UTRAN | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2.1 Definition | Test to verify that if both a GSM and UTRAN network is available, the UE performs cell reselection from GSM to UTRAN if the GSM cell becomes barred or the path loss criterion C1 falls below zero for a period of 5 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2.2 Conformance requirement | 1. At least every 5 s the MS shall calculate the value of C1 and C2 for the serving cell and re‑calculate C1 and C2 values for non serving cells (if necessary). The MS shall then check whether:
1.1 The path loss criterion (C1) for current serving cell falls below zero for a period of 5 s. This indicates that the path l... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2.3 Test purpose | 1. To verify that the UE performs cell reselection from GSM to UTRAN on the following occasions:
1.1 Serving cell becomes barred.
1.2 The path loss criterion C1 for serving cell falls below zero for a period of 5 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2.4 Method of test | Initial conditions
UE is idle updated on Cell 9.
Cell 9:
The SS transmitted system information for Cell 1 and Cell 2 shall be according to TS 34.108, clause 6.1.4 with the following exceptions:
The 3G Neighbour Cell Description of Cell 9 (GSM) refers Cell 1 (UTRAN) and Cell 2 (UTRAN).
SYSTEM INFORMATION TYPE 3 REST OCT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.2.5 Test Requirements | 1) In step a), there shall not be any random access requests on any cell within 1 min.
2) In step e), the UE shall respond on Cell 1, the RRC Connection Request cause shall be "interRAT_CellReselection".
3) In step h), there shall be no access on Cell 1 within 30 s, after having reduced the signal level on Cell 9.
4) I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3 Cell reselection timings; GSM to UTRAN | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3.1 Definition | Test to verify that the UE meets the cell reselection timing requirements when both a GSM and UTRAN network is available. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3.2 Conformance requirement | 1. If the 3G Cell Reselection list (see TS 04.18) includes UTRAN frequencies, the MS shall, at least every 5 s update the value RLA_C for the serving cell and each of the at least 6 strongest non-serving GSM cells.
1.1 The MS shall then reselect a suitable UTRAN cell if its measured RSCP value exceeds the value of RLA_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3.3 Test purpose | 1. To verify that: |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 The UE meets conformance requirement 1.1 and additionally, that no cell reselection is performed if the period is less than 5 s | 1.3 The UE meets conformance requirement 1.3.
6.2.2.3a.4 Method of test
UE is idle updated on Cell 1.
Cell 9:
The SS transmitted system information for Cell 1 shall be according to TS 34.108, clause 6.1.4 with the following exceptions:
The 3G Neighbour Cell Description of Cell 9 (GSM) refers to Cell 1 (UTRAN).
SYSTEM I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3.4 Method of test | UE is idle updated on Cell 1.
Cell 9:
The SS transmitted system information for Cell 1 shall be according to TS 34.108, clause 6.1.4 with the following exceptions:
The 3G Neighbour Cell Description of Cell 9 (GSM) refers to Cell 1 (UTRAN).
SYSTEM INFORMATION TYPE 3 REST OCTETS
- SI2q indicated on BCCH Norm
SYSTEM INFOR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.3.5 Test Requirements | 1) In step d), there shall be no access on Cell 1.
2) In step g), there shall be no access on Cell 1.
3) In step i), the UE shall send random access on Cell 1.
6.2.2.3a Cell reselection timings; GSM to UTRAN (1.28 Mcps TDD)
6.2.2.3a.1 Definition
Test to verify that the UE meets the cell reselection timing requirements ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 The MS shall then reselect a suitable (see 3GPP TS 25.304) UTRAN cell if: | - for a TDD cell the measured RSCP value is equal to or greater than TDD_Qoffset for a period of 5 s and
- for an FDD cell the following criteria are all met for a period of 5 s:
a) its measured RSCP value exceeds the value of RLA_C for the serving cell and all of the suitable (see 3GPP TS 43.022) non-serving GSM cells... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4 Cell reselection in multi-mode shared network environment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4.1 Definition | Test to verify that the UE performs cell reselection according to core specification 25.304 in multi-mode shared network environment (FDD). It is verified that the UE reselects from a shared UTRAN cell in case of a higher ranked GSM cell or if the serving UTRAN cell becomes unsuitable. It is also verified that the UE i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4.2 Conformance requirement | 1. suitable cell:
A "suitable cell" is a cell on which the UE may camp on to obtain normal service. Such a cell shall fulfil all the following requirements.
- The cell shall be part of either:
- the selected PLMN, or:
- the registered PLMN, or:
- a PLMN of the Equivalent PLMN list
according to the latest information pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4.3 Test purpose | 1. To verify that the UE is able to reselect to a higher ranked cell (UTRAN->GSM) in multi-mode shared network environment.
3. To verify that the UE is able to reselect to a GSM cell when the serving shared network UTRAN cell becomes unsuitable (S<0).
4. To verify that the UE is able to return to a shared network UTRAN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4.4 Method of test | Initial conditions
The UE is equipped with a USIM containing default values. The HPLMN (MCC+MNC) of the IMSI for the USIM is set to PLMN1.
Cell reselection parameters are set to default values, so the cell-ranking criterion R equals CPICH_RSCP / RF Signal Level.
The Inter-RAT Cell Info List of Cell 1 (UTRAN) refers to ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.4.5 Test requirements | 1) In step b), the UE shall respond on Cell 1. The displayed PLMN shall be PLMN 1 (UTRAN).
2) In step d), the UE shall not respond on Cell 9 or Cell 10 for 1 min.
3) In step f), the UE shall respond on Cell 9. The displayed PLMN shall be PLMN 1 (GSM).
4) In step h), the UE shall respond on Cell 1. The displayed PLMN sh... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5 Cell reselection using SIB18; UTRAN to GSM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5.1 Definition | Test to verify that the UE performs cell reselection according to core specifications 25.331 and 25.304 in multi-mode environment (FDD) when SIB18 present. It is verified that the UE reselects from a UTRAN cell to the GSM cell allowed by SIB18, even if other GSM cells are better ranked. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5.2 Conformance requirement | 1. suitable cell:
A "suitable cell" is a cell on which the UE may camp on to obtain normal service. Such a cell shall fulfil all the following requirements.
- The cell shall be part of either:
- the selected PLMN, or:
- the registered PLMN, or:
- a PLMN of the Equivalent PLMN list
according to the latest information pr... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.