hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.3.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c(FDD) /6.11.5.4.7.6(1.28Mcps TDD) using condition A12(FDD) /A11(1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The foll... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.3.5 Test requirements | 1. After step 1, the SS shall not receive any SI.
2. In step 2, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU in each TTI until the complete SDU has been received. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4 MAC-es/e correct handling of scheduled transmissions when absolute grant varies | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4.2 Conformance requirement | Extract from 25.321 clause 9.2.5.2.2:
The absolute grant message is sent on downlink, on the configured E-AGCH, from the serving E-DCH cell and allows the Node B scheduler to directly adjust the granted rate of UEs under its control.
[…]
Absolute Grant Value:
This field indicates the maximum E-DCH traffic to pilot rati... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4.3 Test purpose | To verify that the UE transmits different amount of data when the absolute grant varies. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c(FDD) /6.11.5.4.7.6(1.28Mcps TDD) using condition A12(FDD) /A11(1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The foll... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.4.5 Test requirements | 1. In step 3, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU. This shall happen 4 TTIs in a row.
2. In step 7, the SS shall receive 1 MAC-es PDU containing 4 RLC PDUs. This shall happen 2 TTIs in a row. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5 MAC-es/e de-activation and re-activation of HARQ processes | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5.1 Definition and applicability | All UEs which support E-DCH and support 2 ms TTI. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5.2 Conformance requirement | The Serving Grant Update procedure shall be applied at every TTI boundary and shall take into account the Absolute Grant message, Serving Relative Grant and non-serving Relative Grants that apply to the TTI.
The UE shall:
1> set reference_ETPR to the E-DPDCH to DPCCH power ratio as defined in subclause 3.1.2;
1> if an ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5.3 Test purpose | The purpose of this test case is to verify the selective de-activation and re-activation of a HARQ process |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c using condition A12 as specified in clause 9.1 of TS 34.108. The logical channel, transport channel and queue identities are ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.5.5 Test requirements | 1. In step 4 all 8 HARQ processes shall be used to transmit RLC PDU’s
2. In step 8 HARQ processes 0 and 4 shall not be used to transmit RLC PDU’s
3. In step 11 all 8 HARQ processes shall be used to transmit RLC PDU’s |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6 MAC-es/e correct handling of relative grants | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6.2 Conformance requirement | The Serving Grant Update procedure shall be applied at every TTI boundary and shall take into account the Absolute Grant message, Serving Relative Grant and non-serving Relative Grants that apply to the TTI.
The UE shall:
1> set reference_ETPR2 to reference_ETPR as defined in subclause 3.1.2;
1> set reference_ETPR to t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6.3 Test purpose | The purpose of this test case is
1. To verify that the UE acts on serving and non-serving relative grants when the UE is using the Primary E-RNTI.
2. To verify that the UE only acts on non-serving relative grants when the UE is using the Secondary E-RNTI
3. To verify that the UE does not use a Serving_Grant value great... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6.4 Method of test | Initial conditions
System Simulator:
2 cells, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c using condition A12 as specified in clause 9.1 of TS 34.108. The logical channel, transport channel and queue identities are... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.6.5 Test requirements | 1. After step 5 UE will start sending 2 RLC PDU’s per TTI.
2. After step 9, UE will reduce number of RLC PDU’s per TTI to 1.
3. After step 16, UE will not change its rate of RLC PDU’s per TTI.
4. After step 21, UE will reduce number of RLC PDU’s per TTI to 1.
4a After Step 23,UE will start sending 2 RLC PDU’s per TTI
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7 MAC-es/e correct handling of absolute grants on Primary and Secondary E-RNTI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7.2 Conformance requirement | The Serving Grant Update procedure shall be applied at every TTI boundary and shall take into account the Absolute Grant message, Serving Relative Grant and non-serving Relative Grants that apply to the TTI.
The UE shall:
1> set reference_ETPR to the E-DPDCH to DPCCH power ratio as defined in subclause 3.1.2;
1> if an ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7.3 Test purpose | The purpose of this test case is to verify that the UE acting on absolute grants given on the Primary and Secondary E-RNTI and switching between the 2 cases. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c using condition A12 as specified in clause 9.1 of TS 34.108. The logical channel, transport channel and queue identities are ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.7.5 Test requirements | 1. In step 4, the SS shall receive 1 MAC-es PDU containing 4 RLC PDU’s
1a. In step 7 UE shall transmit SI, as an indication that it has stopped using previous absolute grant.
2. After step 8, UE shall start sending loop backed PDU, with one RLC PDU per TTI.
3. In step 12 UE shall transmit SI.
4. After step 13, UE shall... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8 MAC-es/e combined non-scheduled and scheduled transmissions | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8.2 Conformance requirement | From 25.321 clause 11.8.1.4:
The transmission format and data allocation shall follow the requirements below:
[…]
- For all logical channels, if the logical channel belongs to a non-scheduled MAC-d flow, its data shall be considered as available up to the corresponding non-scheduled grant, if the logical channel doe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8.3 Test purpose | To verify that the UE is able to handle combined non-scheduled and scheduled transmissions. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4d (FDD) /6.11.5.4.7.7(1.28Mcps TDD) using condition A15 (FDD) /A14 (1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The f... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.8.5 Test requirements | 1. In step 3, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU on LCH 1.
2. In step 5, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU on LCH 1 and 1 RLC PDU on LCH 2 within the same TTI. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9 MAC-es/e Correct handling of HARQ profile power offsets | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9.2 Conformance requirement | In FDD mode, the rules for E-TFC selection provided below shall apply to UEs in CELL_DCH state with an E-DCH transport channel configured. These UEs shall apply the E-TFC selection procedure when invoked by the HARQ entity (see subclause 11.8.1.1.1). In the case where a 2ms TTI is configured, E-TFC selection shall not ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9.3 Test purpose | The purpose of this test case is to verify that the UE applies different HARQ profiles from different MAC-d flows to E-DCH transmissions accordingly and in case data from two MAC-d flows is transmitted in the same E-DCH transmission, the UE selects the correct power offset. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4d using condition A15 as specified in clause 9.1 of TS 34.108. The logical channel, transport channel and queue identities are s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.9.5 Test requirements | 1. In step 4, UE shall loop back PDUs for two TTIs, with one RLC PDU per TTI.
2. In step 9, UE shall loop back PDUs for two TTIs, with two RLC PDUs per TTI.
3. In step 16, UE shall loop back PDUs for one TTI, with three RLC PDU per TTI (2 RLC PDU’s from LCH1 and 1 RLC PDU from LCH 2).
4. In step 17, UE shall loop back ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10 MAC-es/e Correct handling of minimum set of E-TFCI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10.2 Conformance requirement | In FDD mode, the rules for E-TFC selection provided below shall apply to UEs in CELL_DCH state with an E-DCH transport channel configured. These UEs shall apply the E-TFC selection procedure when invoked by the HARQ entity (see subclause 11.8.1.1.1). In the case where a 2ms TTI is configured, E-TFC selection shall not ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10.3 Test purpose | The purpose of this test case is to verify that the UE considers the minimum set of E-TFCI as always supported. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4c using condition A12 as specified in clause 9.1 of TS 34.108. The following parameters are specific for this test case:
Logical... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.10.5 Test requirements | 1. In step 4, UE shall start sending loop backed PDU, with two RLC PDUs per TTI.
2. In step 12, UE shall start sending loop backed PDU, with one RLC PDU per TTI.
7.1.6.2.10a Smallest E-TFC (1.28Mcps TDD)
7.1.6.2.10a.1 Definition and applicability
All UEs which support E-DCH.
7.1.6.2.10a.2 Conformance requirement
In TDD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11 MAC-es/e correct handling of absolute and relative grants in discontinuous downlink reception operation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11.1 Definition and applicability | All UEs which support DPCCH Discontinuous Transmission and Discontinuous Downlink Reception operation. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11.2 Conformance requirement | From TS 25.321 clause 11.8.1.3.1
The Serving Grant Update procedure shall be applied at every TTI boundary and shall take into account the Absolute Grant message, Serving Relative Grant and non-serving Relative Grants that apply to the TTI.
The UE shall:
1> set reference_ETPR2 to reference_ETPR as defined in subclause ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11.3 Test purpose | The purpose of this test case is to verify that when in discontinuous downlink reception operation, the UE monitors the E-AGCH and E-RGCH at the times specified in the core specifications. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11.4 Method of test | Initial conditions
System Simulator:
2 cells, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / UM PS RAB + UL: [max bit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.11.5 Test requirements | 1. After step 2, UE will start sending 2 RLC PDU’s per TTI.
2. After step 6, UE will start sending 1 RLC PDU per TTI.
3. After step 9, UE will start sending 2 RLC PDU’s per TTI.
4. After step 13, UE will start sending 1 RLC PDU per TTI.
5. After step 19, UE will start sending 1 RLC PDU per TTI.
6. After step 22, UE wil... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12 MAC-es/e correct handling scheduling information transmission (for different UpPCH shifting setting, for 1.28Mcps TDD only) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12.1 Definition and applicability | All UEs which support 1.28Mcps TDD and HS-PDSCH and E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12.2 Conformance requirement | [TS 25.224, clause 5.2.2]
Open loop uplink synchronisation control is used for UpPCH.
The UE may estimate the propagation delay tp based upon the path loss using the received P-CCPCH and/or DwPCH power.
The UpPCH is sent to the Node B advanced in time according to the timing of the received DwPCH. The time of the begi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12.3 Test purpose | To confirm that UE can transmit SI correctly for different UpPCH shifting setting. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12.4 Method of test | Initial conditions
System Simulator:
1 cell, 3 frequency (one is primary frequency, others are secondary frequency).
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.5.4.7.6 using condition A11 as specified in clause 9.1 of TS 34.108 at the secondary frequen... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.2.12.5 Test requirements | 1. After step 3 the SS shall receive an SI indicating that data is available on LCH 1.
2. After step 10 the SS shall receive an SI indicating that data is available on LCH 1.
3. After step 17 the SS shall receive an SI indicating that data is available on LCH 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3 MAC-es/e- E-TFC selection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1 MAC-es/e E-TFC priority | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1.2 Conformance requirement | Extract from TS 25.321 clause 11.8.1.4
[…]
RRC can control the scheduling of uplink data by giving each logical channel a priority between 1 and 8, where 1 is the highest priority and 8 the lowest. E-TFC selection in the UE shall be done in accordance with the priorities indicated by RRC. Logical channels have absolute... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1.3 Test purpose | To verify that the UE transmits data in order of priority |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4d(FDD) /6.11.5.4.7.7(1.28Mcps TDD) using condition A15(FDD) /A14(1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The logi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.1.5 Test requirements | 1. In step 6, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU from LCH 1 in each TTI until the whole RLC SDU has been received.
2. In step 6, the SS verifies that no data is received on LCH 2 until all data on LCH 1 has been received
3. In step 7, the SS shall receive 1 MAC-es PDU containing 1 RLC PDU from LCH 2... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2 MAC-es/e transport block size selection/ UL QPSK | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2.2 Conformance requirement | Extract from TS 25.321 clause 11.8.1.4
For Rel-6:
[…]
The transmission format and data allocation shall follow the requirements below:
- Only E-TFCs from the configured E-TFCS shall be considered for the transmission;
[…]
- The UE may avoid using the following E-TFCIs;
- If the UE is configured with E-TFCI table 0 (see... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2.3 Test purpose | To verify that the UE transmits all possible transport block sizes within the UE capability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
UE in idle mode
The following parameters are specific for this test case:
Sub-tests and test points for UE HS-DSCH physical layer category 6. Testing of UE supporting UE HS-DSCH physical layer category 13 to 15 shall be perf... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.2.5 Test requirements | 1. In step 20, the SS verifies that the received E-TFC has the correct size
2. In step 20, the SS shall receive 2 RLC SDUs with the same content as sent in downlink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3 Impact on E-TFCI selection on MAC at UE for UL DRX at Node B/ MAC Inactivity Threshold>1 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3.1 Definition and applicability | All UEs which support UL DTX (E-DCH start time restriction). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3.2 Conformance requirement | In FDD mode, the rules for E-TFC selection provided below shall apply to UEs in CELL_DCH state with an E-DCH transport channel configured. These UEs shall apply the E-TFC selection procedure when invoked by the HARQ entity (see subclause 11.8.1.1.1). In the case where a 2ms TTI is configured, E-TFC selection shall not ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3.3 Test purpose | The purpose of this test case is to verify that
1. To verify that when no E-DCH transmission has been performed for MAC Inactivity Threshold -1 previous TTI, UE start E-DCH transmission in TTI satisfying [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle = 0.
2. To verify that when E-DCH transmission has been performed with... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / UM PS RAB + UL: [max bit ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.3.5 Test requirements | 1. In step 3, the CFN of transmitted SI satisfies [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle = 0.
2. In step 8, the CFN of loop backed PDU satisfies [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle ≠ 0
3. In step 11,for all iterations, the CFN of loop backed PDU satisfies [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4 Impact on E-TFCI selection on MAC at UE for UL DRX at Node B/ MAC Inactivity Threshold =1 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4.1 Definition and applicability | All UEs which support UL DTX (E-DCH start time restriction). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4.2 Conformance requirement | In FDD mode, the rules for E-TFC selection provided below shall apply to UEs in CELL_DCH state with an E-DCH transport channel configured. These UEs shall apply the E-TFC selection procedure when invoked by the HARQ entity (see subclause 11.8.1.1.1). In the case where a 2ms TTI is configured, E-TFC selection shall not ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4.3 Test purpose | To verify that UE always start E-DCH transmission in TTI satisfying [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle = 0. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / UM PS RAB + UL: [max bit ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.4.5 Test requirements | 1. In step 4, the CFN of loop backed PDU satisfies [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle = 0.
2. In step 2, the CFN of transmitted SI satisfies [5*CFN - UE DTX DRX Offset] mod MAC DTX Cycle = 0
3. In step 5, for all 4 transmissions, the CFN of the loop backed PDUs satisfies [5*CFN - UE DTX DRX Offset] mod MAC ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.5 MAC-es/e transport block size selection(1.28Mcps TDD) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.5.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.3.5.2 Conformance requirement | Extract from TS 25.321 clause 9.2.6.4
For 1.28 Mcps TDD, the normative description of the mapping between the TB index and the corresponding transport block size is provided in Annex BC.
[…]
Reference(s)
TS 25.321 clause 9.2.6.4 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4 MAC-es/e - E-DCH retransmissions | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1 MAC-es/e process handling | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1.1 Definition and applicability | All UEs which support E-DCH with 2ms TTI. (FDD)/ All UEs which support E-DCH(1.28Mcps TDD). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1.2 Conformance requirement | Extract from 25.331:
1> for FDD:
2> if the IE "Non-scheduled transmission grant info" is included:
3> if the TTI configured on the E-DCH equals 2ms, and the IE "2ms non-scheduled transmission grant HARQ process allocation" is configured for this MAC-d flow:
4> MAC-d PDU's for logical channels belonging to this MAC-d f... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1.3 Test purpose | To verify that the UE performs transmissions and retransmissions in the correct MAC-es process.
To verify that the UE uses only the allowed HARQ processes for scheduled and non-scheduled transmissions. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4d(FDD) /6.11.5.4.7.7(1.28Mcps TDD) using condition A15(FDD) /A14(1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The foll... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.1.5 Test requirements | 1. In step 2 the SS shall receive a MAC-es PDU in HARQ process 1(FDD) / one HARQ process of 4 to7 (1.28Mcps TDD).
2. In step 4 the SS shall receive a MAC-es PDU in HARQ process 1(FDD) / one HARQ process of 4 to7 (1.28Mcps TDD).
3. In step 8 the SS shall receive all MAC-es PDUs in HARQ process 2/ one HARQ process of 0 t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2 MAC-es/e maximum number of retransmissions | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2.1 Definition and applicability | All UEs which support E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2.2 Conformance requirement | Extract From 25.321 clause 11.8.1.4:
For each MAC-d flow, RRC configures MAC with a HARQ profile and a multiplexing list. Additionally, RRC configures MAC with a power offset for "Control-only" transmissions. This power offset and a maximum number of HARQ transmissions of 8 will be used to define a HARQ profile for “Co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2.3 Test purpose | To verify that the UE, when 2 MAC d flows are multiplexed, follows the maximum number of retransmissions according to the HARQ profiles (different values configured for maximum number of retransmissions for each HARQ profile). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
User Equipment:
The SS establishes the reference radio bearer configuration specified in TS 34.108 clause 6.11.4d(FDD) /6.11.5.4.7.7(1.28Mcps TDD) using condition A15(FDD) /A14(1.28Mcps TDD) as specified in clause 9.1 of TS 34.108. The logi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.2.5 Test requirements | 1. In step 6, exactly 2 retransmission shall be performed by the UE.
2. In step 15, exactly 4 retransmissions shall be performed by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.3 MAC-es/e Correct handling of MAC-es/e reset | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.3.1 Definition and applicability | All UEs which support E-DCH (FDD) / All UEs which support E-DCH(1.28Mcps TDD). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.6.4.3.2 Conformance requirement | For FDD, if a reset of the MAC-es/e entity is requested by upper layers, the UE shall at the activation time indicated by higher layers:
- flush all HARQ processes.
- set CURRENT_TSN to 0 for all the logical channels mapped to E-DCH.
NOTE: In this case, the HARQ entity will not notify the Scheduling Information Reporti... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.