hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1 Mapping between logical channels and transport channels | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1 CCCH mapped to RACH/FACH / Invalid TCTF | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the RACH/FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1.2 Conformance requirement | CCCH mapped to RACH/FACH:
- TCTF field is included in MAC header.
The following fields are defined for the MAC header:
- Target Channel Type Field
…
Coding of the Target Channel Type Field on FACH for FDD
TCTF
Designation
00
BCCH
01000000
CCCH
01000001-01111111
Reserved
(PDUs with this coding will be discarded by this ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1.3 Test purpose | 1. To verify that the UE discards PDUs with reserved or incorrect values in the TCTF field.
2. To verify that the TCTF field is correctly applied when a CCCH is mapped to the RACH/FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
The SCCPCH is configured as specified in TS 34.108 clause 6.10.2.4.3.3 (FDD) , 6.11.5.4.4.3(1.28Mcps TDD) (Interactive/Background 32 kbps RAB + SRB for PCCH + SRB for CCCH + SRB for DCCH + SRB for BCCH) with the following exceptions for the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.1.5 Test Requirement | On the first iteration, and on each iteration in step e) the UE should not recognise the RRC CONNECTION SETUP message and therefore should either retransmit the RRC CONNECTION REQUEST after each expiry of T300 (the UE should send up to N300=3 RRC CONNECTION REQUESTs before abandoning the procedure) or not respond (if N... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2 DTCH or DCCH mapped to RACH/FACH / Invalid TCTF | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the RACH/FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2.2 Conformance requirement | DTCH or DCCH mapped to RACH/FACH:
TCTF field, C/T field, UE-Id type field and UE-Id are included in the MAC header.
The following fields are defined for the MAC header:
- Target Channel Type Field
…
Coding of the Target Channel Type Field on FACH for FDD
TCTF
Designation
00
BCCH
01000000
CCCH
01000001-01111111
Reserved... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2.3 Test purpose | To confirm that the UE can handle the maximum number of re-ordering SDUs per each MAC-ehs entity. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2.4 Method of test | Initial conditions
System Simulator:
1 cell, default parameters, Ciphering Off.
The SCCPCH is configured as specified in TS 34.108 clause 6.10.2.4.3.3(FDD) and 6.11.5.4.4.3(1.28Mcps TDD) (Interactive/Background 32 kbps RAB + SRB for PCCH + SRB for CCCH + SRB for DCCH + SRB for BCCH) with the following exceptions for th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.2.5 Test Requirement | In step a) the TCTF field should have the value ‘01'B. Note that this may be implied from receipt of the PAGING RESPONSE/SERVICE REQUEST message correctly by the SS test script.
During the test the SS shall request an RLC status report with every transmitted PDU by setting of the Polling Bit. The UE shall not send any ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3 DTCH or DCCH mapped to RACH/FACH / Invalid C/T Field | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the RACH/FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3.2 Conformance requirement | DTCH or DCCH mapped to RACH/FACH:
TCTF field, C/T field, UE-Id type field and UE-Id are included in the MAC header.
The following fields are defined for the MAC header:
- C/T field
The C/T field provides identification of the logical channel instance when multiple logical channels are carried on the same transport chan... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3.3 Test purpose | 1. To verify that the UE discards PDUs with reserved or incorrect values in C/T field.
2. To verify that the TCTF field, C/T field, UE-Id type and UE-Id field are correctly applied when a DTCH or DCCH is mapped to the RACH/FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3.4 Method of test | Initial conditions
System Simulator:
See clause 7.1.1.2.4.
User Equipment:
See clause 7.1.1.2.4.
Test procedure
a) The SS receives the PAGING RESPONSE or SERVICE REQUEST (depending on domain) message from the UE and checks the C/T field.
b) The SS transmits MAC PDUs containing RLC AM PDUs containing a DIRECT TRANSFER m... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.3.5 Test Requirement | In step a) the C/T field should be set to the Logical Channel ID for SRB #3 (0010'B). Note that this may be implied from receipt of the PAGING RESPONSE/SERVICE REQUEST message correctly by the SS test script.
During the test the SS shall request RLC status report with every transmitted PDU by setting of the Polling Bit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4 DTCH or DCCH mapped to RACH/FACH / Invalid UE ID Type Field | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the RACH/FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4.2 Conformance requirement | DTCH or DCCH mapped to RACH/FACH:
TCTF field, C/T field, UE-Id type field and UE-Id are included in the MAC header.
The following fields are defined for the MAC header:
- UE-Id Type
The UE-Id Type field is needed to ensure correct decoding of the UE-Id field in MAC Headers.
Table 9.2.1.7: UE-Id Type field definition
UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4.3 Test purpose | 1. To verify that the UE discards PDUs with reserved values in UE-Id type field.
2. To verify that the TCTF field, C/T field, UE-Id type and UE-Id field are correctly applied when a DTCH or DCCH is mapped to the RACH/FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4.4 Method of test | Initial conditions
System Simulator:
See clause 7.1.1.2.4.
User Equipment:
See clause 7.1.1.2.4.
Test procedure
a) The SS receives the PAGING RESPONSE or SERVICE REQUEST (depending on domain) message from the UE and checks the UE-Id Type field.
b) The SS transmits MAC PDUs containing RLC AM PDUs containing a DIRECT TRA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.4.5 Test Requirement | In step a) the UE-Id Type field should be set to 01'B. Note that this may be implied from receipt of the PAGING RESPONSE/SERVICE REQUEST message correctly by the SS test script.
During the test the SS request an RLC status report with every transmitted PDU by setting of the Polling Bit. The UE shall not send any STATUS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5 DTCH or DCCH mapped to RACH/FACH / Incorrect UE ID | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the RACH/FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5.2 Conformance requirement | DTCH or DCCH mapped to RACH/FACH:
TCTF field, C/T field, UE-Id type field and UE-Id are included in the MAC header.
The following fields are defined for the MAC header:
- UE-Id
The UE-Id field provides an identifier of the UE on common transport channels…
Lengths of UE Id field
UE Id type
Length of UE Id field
U-RNTI
3... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5.3 Test purpose | 1. To verify that the UE ignores PDUs with UE-Ids that do not match the Id allocated to it.
2. To verify that the TCTF field, C/T field, UE-Id type and UE-Id field are correctly applied when a DTCH or DCCH is mapped to the RACH/FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5.4 Method of test | Initial conditions
System Simulator:
See clause 7.1.1.2.4.
User Equipment:
See clause 7.1.1.2.4.
Test procedure
a) The SS receives the PAGING RESPONSE or SERVICE REQUEST (depending on domain) message from the UE and checks the UE-Id field.
b) The SS transmits MAC PDUs containing RLC AM PDUs containing a DIRECT TRANSFER... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.5.5 Test Requirement | In step a) the UE-Id field should be set to the C-RNTI allocated in the RRC CONNECTION SETUP message. Note that this may be implied from receipt of the PAGING RESPONSE/SERVICE REQUEST message correctly by the SS test script.
During the test the SS shall request an RLC status report with every transmitted PDU by setting... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6 DTCH or DCCH mapped to DSCH or USCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6.1 Definition and applicability | Applicable for if mode TDD only or FDD only is supported. In FDD applicable only to R99 and Rel-4 UEs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6.2 Conformance requirement | The TCTF field is included in the MAC header for TDD only. The UE-Id type and UE-Id are included in the MAC header for FDD only. The C/T field is included if multiplexing on MAC is applied.
Reference(s)
TS 25.321 clause 9.2.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6.3 Test purpose | To verify when DTCH or DCCH is mapped to DSCH or USCH, the TCTF field is applied for TDD only, the UE-Id type and UE-Id are applied for FDD only. If multiplexing on MAC is applied, C/T field is included, otherwise, the C/T field is not included in the MAC header. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6.4 Method of test | Initial conditions
System Simulator:
- 1 cell, default parameters. Ciphering Off.
User Equipment:
- The UE shall operate under normal test conditions, Ciphering Off.
- The Test-USIM shall be inserted.
The UE is in Connected mode and a connection is established as described in the TS 34.123-1, 7.3 PDCP testing, clause "... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.6.5 Test requirements | TCTF field in the MAC header of loop back data block is "DTCH or DCCH over DSCH or USCH" for TDD only. The UE-ID type and UE-Id are applied in the MAC header for FDD only. If multiplexing on MAC is applied, C/T field is included, otherwise, C/T field is not included. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7 DTCH or DCCH mapped to CPCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7.1 Definition and applicability | All UEs which support CPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7.2 Conformance requirement | UE-Id type field and UE-Id are included in the MAC header. The C/T field is included in the MAC header if multiplexing on MAC is applied.
Reference(s)
TS 25.321 clauses 9.2.1.1 and 11.3.
TS 25.214 clause 6.2.
TS 25.211 clause 5.3.3.11. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7.3 Test purpose | To verify when DTCH or DCCH mapped to CPCH, UE-Id type field and UE-Id are included in the MAC header. if multiplexing on MAC is applied, the C/T field is included in the MAC header, otherwise, C/T field is not included. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7.4 Method of test | Initial conditions
System Simulator:
- 1 cell, default parameters, Ciphering Off.
User Equipment:
- The UE shall operate under normal test conditions, Ciphering Off.
- The Test-USIM shall be inserted.
The UE is in Connected mode and a connection is established as described in the TS 34.123-1, 7.3 PDCP testing, clause "... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.7.5 Test requirements | The UE-Id type and UE-Id field are included in the MAC header. When multiplexing on MAC is not applied, C/T field is included in the MAC header. Otherwise, C/T field is not included. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8 DTCH or DCCH mapped to DCH / Invalid C/T Field | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the DCH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8.2 Conformance requirement | DTCH or DCCH mapped to DCH, no multiplexing of dedicated channels on MAC: -no MAC header is required.
DTCH or DCCH mapped to DCH, with multiplexing of dedicated channels on MAC: -C/T field is included in MAC header.
The following fields are defined for the MAC header:
- C/T field
The C/T field provides identification o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8.3 Test purpose | 1. To verify that the UE discards PDUs with reserved or incorrect values in C/T field.
2. To verify that the C/T field is correctly applied when a DTCH or DCCH is mapped to a DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8.4 Method of test | Initial conditions
System Simulator:
- 1 cell, default parameters, Ciphering Off.
The DCH/DPCH is configured as specified in TS 34.108 clause 6.10.2.4.1.2 (FDD), 6.11.5.4.1.2(1.28Mcps TDD): (Stand-alone UL:3.4 DL:3.4 kbps SRBs for DCCH) with the following exception:
Higher layer
RAB/signalling RB
RB#3 (SRB#3)
User of R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.8.5 Test Requirement | In step a) the C/T field should be set to the Logical Channel ID for SRB #3 (0010'B). Note that this may be implied from receipt of the PAGING RESPONSE or SERVICE REQUEST message correctly by the SS test script.
During the test the SS shall request RLC status reports with every transmitted PDU by setting of the Polling... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9 MTCH mapped to FACH / Invalid TCTF (TDD MBSFN) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9.2 Conformance requirement | MTCH mapped to FACH:
The TCTF field and MBMS-Id field are included in the MAC header for MTCH
…
Table 9.2.1.1: Coding of the Target Channel Type Field on FACH for TDD
TCTF
Designation
000
BCCH
001
CCCH
010
CTCH
01100
DCCH or DTCH
over FACH
01101
MCCH
01110
MTCH
01111
MSCH
100
SHCCH
101-111
Reserved
(PDUs with this codi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9.3 Test purpose | 1. To verify that the UE discards PDUs with reserved or incorrect values in the TCTF field.
2. To verify that the TCTF field is correctly applied when a MTCH is mapped to the FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9.4 Method of test | Initial conditions
System Simulator:
Unicast carrier: 1 cell, Cell 1 with default configuration.
- MBSFN carriers: 1 cell, Cell 31 has default parameters. In addition to broadcasting System Information, MCCH messages are transmitted by the SS on Cell 31 using MBMS configuration C1 and Default1 MCCH scheduling (No ongo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.9.5 Test Requirement | 1) At step 11 on each iteration, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number that corresponds to zero received RLC SDUs for Cell 31 MTCH.
2) At step 15 on each iteration, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number that corresponds to > 0 received RL... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10 MTCH mapped to FACH / Invalid MBMS-Id (TDD MBSFN) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10.1 Definition | This tests that the MAC applies the correct header to the MAC PDU according to the type of logical channel carried on the FACH transport channel. Incorrect application of MAC headers would result in inoperation of the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10.2 Conformance requirement | MTCH mapped to FACH:
The TCTF field and MBMS-Id field are included in the MAC header for MTCH
…
Table 9.2.1.8: Structure of the MBMS-Id field
MBMS-Id field
MBMS logical channel identity [7]
0000
1
0001
2
...
...
1110
15
1111
Reserved
(PDUs with this coding will be discarded by this version of the protocol)
Reference(s)... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10.3 Test purpose | 1. To verify that the UE discards PDUs with reserved or incorrect values in the MBMS-Id field.
2. To verify that the MBMS-Id field is correctly applied when a MTCH is mapped to the FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10.4 Method of test | Initial conditions
System Simulator:
Unicast carrier: 1 cell, Cell 1 with default configuration.
- MBSFN carriers: 1 cell, Cell 31 has default parameters. In addition to broadcasting System Information, MCCH messages are transmitted by the SS on Cell 31 using MBMS configuration C1 and Default1 MCCH scheduling (No ongo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.1.10.5 Test Requirement | 1) At step 10 on each iteration, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number that corresponds to zero received RLC SDUs for Cell 31 MTCH.
2) At step 14 on each iteration, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number that corresponds to > 0 received RL... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2 RACH/FACH procedures | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.1 Selection and control of Power Level | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.1.1 Void | NOTE Test case "Selection and control of Power Level (FDD)" has been removed as the test purpose is implicitly tested by radio resource management test cases in TS 34.121 clause 8.4.2.1 and 8.4.2.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.1.2 Selection and control of Power Level (3,84 Mcps TDD option) | (FFS) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.1.3 Void | NOTE: Test case "Selection and control of Power Level (1.28Mcps TDD option)" has been removed as the test purpose is implicitly tested by radio resource management test cases in TS 34.1227.1.2.2. Correct application of Dynamic Persistence |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.2 Correct application of Dynamic Persistence | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.2.1 Void | NOTE Test case "Correct application of Dynamic Persistence (FDD)" has been removed as the test purpose is implicitly tested by radio resource management test cases in TS 34.121. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.2.2 Correct application of Dynamic Persistence (3.84 Mcps TDD option) | (FFS) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.2.3 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3 Correct Selection of RACH parameters | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1 Correct Selection of RACH parameters (FDD) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1.1 Definition | The physical random access procedure described in this subclause is initiated upon request of a PHY-Data-REQ primitive from the MAC sublayer.
The UE selection of "PRACH system information" is described in TS 25.331 clause 8.5.17. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1.2 Conformance requirement | A. The physical random-access procedure shall be performed as follows:
1 Derive the available uplink access slots, in the next full access slot set, for the set of available RACH sub-channels within the given ASC with the help of TS 25.214, subclauses 6.1.1 and 6.1.2. Randomly select one access slot among the ones prev... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6 If no positive or negative acquisition indicator (AI +1 nor –1) corresponding to the selected signature is detected in the downlink access slot corresponding to the selected uplink access slot: | 6.1 Select the next available access slot in the set of available RACH sub-channels within the given ASC.
6.2 Randomly select a new signature from the set of available signatures within the given ASC. The random function shall be such that each of the allowed selections is chosen with equal probability.
…
6.4 Decrease ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1.3 Test purpose | To verify that:
A1 the UE, initially:
- determines the ASC for the given Access Class (AC).
- derives the available uplink access slots, in the next full access slot set, for the set of available RACH sub-channels within the given ASC with the help of TS 25.214, subclauses 6.1.1. and 6.1.2. and randomly select one acce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1.4 Method of test | Initial conditions
The UE shall be attached to the network and in idle mode.
The UE shall use Access Class AC#0-9, which provides permission to use ASC#0 for the initial access.
Preamble Retrans Max parameter in SIB5/SIB5bis set to 5.
Maximum number of preamble retransmission cycles in SIB 5/SIB 5bis is set to Mmax = 1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.1.5 Test requirements | A1
At step 2
• the SS shall receive a PRACH preamble using an access slot as defined below and using a preamble signature from the set of preamble signatures {P0 .. P7}. See TS 25.213, clause 4.3.3.3 for a list of preamble codes.
• the access slot selected for the first access preamble can be any of the shaded table en... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.2 Correct Selection of RACH parameters (3.84 Mcps TDD option) | (FFS) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.3 Correct Selection of RACH parameters (1.28 Mcps TDD option) | 7.1.2.3.3.1 Definition and applicability
All TDD 1.28 Mcps UE |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.3.2 Conformance requirement | That the UE selects UpPCH codes and UpPCH sub-channels that are defined for the ASC that the UE should adopt based on its AC (when the RACH message to be transmitted is an 'RRC Connection Request'). Parameters are defined in the SIB 5 messages received by the UE.
Reference(s)
TS25.224 clauses 4.7.1 and 5.6.
TS25.321 cl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.3.4 Method of test | Initial conditions
The UE is attached to the network and in idle mode. The Sim card should be configured so that the UE can adopt a known ASC based on its AC. The SS will broadcast SIB 5 messages that allocate to each ASC subsets of the total UpPCH codes and sub-channels.
Related ICS/IXT Statement(s)
TBD
Foreseen Final... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.3.3.5 Test Requirements | The UpPCH transmissions should be made in sub-channels and using codes that are allocated to the ASC that the UE should adopt based on its AC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.4 Correct Detection and Response to FPACH (1.28 Mcps TDD option) | 7.1.2.4.1 Definition and applicability
All TDD 1,28 Mcps UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.4.2 Conformance requirement | That the UE:
1. Receives and acts upon an FPACH message transmitted within WT sub-frames of the UE transmitting a UpPCH code, provided that:
- The FPACH was transmitted in the FPACH resource associated with the UpPCH code used by the UE; and
- The FPACH message correctly identifies the UpPCH codes identity and the numb... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.4.4 Method of test | Initial conditions
The UE is attached to the network and in idle mode. The SS BCH SIB 5 message will specify that there are two or more FPACH associated with the UpPCH code set in a single PRACH system information. The UpPCH code set must include one or more odd and one or more even numbered codes.
Related ICS/IXT Stat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.4.5 Test Requirements | The UE should not respond to FPACH transmissions, which are made on the incorrect FPACH resources for the UpPCH code that the UE uses. The UE should continue to transmit UpPCH until the permitted maximum number of power ramping cycles is complete.
The UE should not respond to FPACH transmissions which are made within W... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.2.5 Void | NOTE: Test case "Control of RACH transmissions for FDD mode" has been removed as the test purpose is implicitly tested by radio resource management test case in TS 34.121 clause 8.4.2.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3 Priority handling between data flows of one UE | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1 Priority handling between data flows of one UE | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1.1 Definition and applicability | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1.2 Conformance requirement | When selecting between the Transport Format Combinations in the given Transport FormatCombination Set, priorities of the data flows to be mapped onto the corresponding Transport Channels can be taken into account.
The chosen TFC shall be selected from within the set of valid TFCs and shall satisfy the following criteri... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1.3 Test purpose | To verify that the UE prioritise signalling compared to data on a lower priority logical channel. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1.4 Method of test | Initial conditions
System Simulator:
- 1 cell, default parameters, Ciphering Off.
User Equipment:
- The UE shall operate under normal test conditions, Ciphering Off.
- The Test-USIM shall be inserted.
The generic procedure for Radio Bearer establishment (clause 7.1.3 of TS 34.108) is executed, with all the parameters a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.1.5 Test requirements | 1. After step 10 the UE shall transmit a MEASUREMENT REPORT message within 500 ms.
2. After step 11 the UE shall resume data transmission. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.2 TFC Selection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.2.1 Definition and applicability | All UEs |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.2.2 Conformance requirement | Before selecting a TFC, i.e. at every boundary of the shortest TTI, or prior to each transmission on PRACH the set of valid TFCs shall be established. All TFCs in the set of valid TFCs shall:
1. belong to the TFCS.
1a. not be restricted by higher layer signalling (e.g. TFC Control, see [7]).
2. not be in the Blocked st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.2.3 Test purpose | 1. To verify that the UE supports a TFCS that does not allow simultaneous transmission of max data rate on all transport channels.
2. To verify that the UE selects a TFC according to the rule that no other TFC shall allow the transmission of more highest priority data than the chosen TFC.
3. To verify that the UE selec... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1.3.2.4 Method of test | Initial conditions
System Simulator:
- 1 cell, default parameters, Ciphering Off.
User Equipment:
- The UE shall operate under normal test conditions, Ciphering Off.
- The Test-USIM shall be inserted.
RRC Connection Setup procedure is executed with the following exception for SRB 2
Parameter
Value
Polling Info
- Timer ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.