hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.74.1 Definition and applicability | All UE categories which support Dual Cell HSDPA. UE supports F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.74.2 Conformance requirement | If the UE receives:
- a RADIO BEARER RECONFIGURATION message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (for FDD only);
1> act upon all received... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.74.3 Test purpose | 1. To confirm that the UE configures the physical channels, transits from CELL_DCH to CELL_FACH, and to stop simultaneous Dual-Band Dual-Cell and 16QAM reception according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters, transits from CELL_FACH to... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.74.4 Method of test | Initial Condition
System Simulator: 2 cells –Cell 1/2 DC HSDPA cell(s) with Cell 1 (Anchor Carrier) and Cell 2 (Secondary Carrier)
UE: CELL_DCH (state 6-18 PS-DCCH+DTCH E-DCH/HS-DSCH) under the condition A25 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports dual band... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.74.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7, the UE should transmit UE CAPABILITY INFORMATION on SRB2.
At step 8, the UE shall transmit two CQI reports of type A.
At step 11, the UE should t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Success Activation and Deactivation of Dual-Cell for different bands and 64QAM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75.1 Definition and applicability | All UE categories which support Dual Cell HSDPA. UE supports F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75.2 Conformance requirement | If the UE receives:
- a RADIO BEARER RECONFIGURATION message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (for FDD only);
1> act upon all received... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75.3 Test purpose | 1. To confirm that the UE configures the physical channels, transits from CELL_DCH to CELL_FACH, and to stop simultaneous Dual-Band Dual-Cell and 64QAM reception according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters, transits from CELL_FACH to... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75.4 Method of test | Initial Condition
System Simulator: 2 cells –Cell 1/2 DC HSDPA cell(s) with Cell 1 (Anchor Carrier) and Cell 2 (Secondary Carrier)
UE: CELL_DCH (state 6-18 PS-DCCH+DTCH E-DCH/HS-DSCH) under the condition A25 as specified in clause 7.4 of TS 34.108 with exception as specified in specific message content for RADIO BEARER... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.75.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7, the UE should transmit UE CAPABILITY INFORMATION on SRB2.
At step 8, the UE shall transmit two CQI reports of type A.
At step 11, the UE should ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76 Radio Bearer Reconfiguration for transition between CELL_FACH and CELL_DCH: Success (start and stop Dual-Cell HSUPA (QPSK) and Dual-Cell HSDPA (16QAM) operation) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76.1 Definition and applicability | All UEs supporting Dual Cell HSUPA; and supporting F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable SECONDARY_CELL_E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76.3 Test purpose | 1. To verify that the UE, when UE is in CELL_DCH state with Dual-Cell E-DCH (Configured) and Dual-Cell HSDPA (Configured and Activated) enters CELL_FACH state and reconfigures the physical channels to stop Dual-Cell E-DCH and Dual-Cell HSDPA operation according to the received Radio Bearer Reconfiguration message.
2. T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76.4 Method of test | Initial Condition
System Simulator: 2 cells
- Cell 1/2 DC-HSUPA and DC-HSDPA cell(s) with Cell 1 (Serving HS.DSCH cell/Primary uplink frequency) and Cell 2 (Secondary serving HS.DSCH cell /Secondary uplink frequency)
UE: PS_DCCH+DTCH E-DCH/HS-DSCH (state 6-18) under condition A25c, as specified in clause 7.4 of TS 34.1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.76.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77 Radio Bearer Reconfiguration for transition between CELL_FACH and CELL_DCH: Success (Dual-Cell HSUPA (QPSK) and Dual-Cell HSDPA (64QAM)) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77.1 Definition and applicability | All UEs supporting Dual Cell HSUPA; 64QAM and supporting F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable SECONDARY_CELL_E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77.3 Test purpose | 1. To verify that the UE, when UE is in CELL_DCH state with Dual-Cell E-DCH (Configured) and Dual-Cell HSDPA (Configured and Activated) with QPSK in UL and 64QAM in DL enters CELL_FACH state and reconfigures the physical channels to stop Dual-Cell E-DCH and Dual-Cell HSDPA operation according to the received Radio Bear... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77.4 Method of test | Initial Condition
System Simulator: 2 cells
- Cell 1/2 DC-HSUPA and DC-HSDPA cell(s) with Cell 1 (Serving HS.DSCH cell/Primary uplink frequency) and Cell 2 (Secondary serving HS.DSCH cell /Secondary uplink frequency)
UE: PS_DCCH+DTCH E-DCH/HS-DSCH (state 6-18) under condition A25c, as specified in clause 7.4 of TS 34.1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.77.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78 Radio Bearer Reconfiguration for transition between CELL_FACH and CELL_DCH: Success (start and stop Dual-Cell HSUPA (16QAM) and Dual-Cell HSDPA (16QAM) operation) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78.1 Definition and applicability | All UEs supporting uplink 16QAM, Dual Cell HSUPA; and supporting F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable SECONDARY_CELL_E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78.3 Test purpose | 1. To verify that the UE, when UE is in CELL_DCH state with Dual-Cell E-DCH (Configured) and Dual-Cell HSDPA (Configured and Activated) enters CELL_FACH state and reconfigures the physical channels to stop Dual-Cell E-DCH and Dual-Cell HSDPA operation according to the received Radio Bearer Reconfiguration message.
2. T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78.4 Method of test | Initial Condition
System Simulator: 2 cells
- Cell 1/2 DC-HSUPA and DC-HSDPA cell(s) with Cell 1 (Serving HS.DSCH cell/Primary uplink frequency) and Cell 2 (Secondary serving HS.DSCH cell /Secondary uplink frequency)
UE: PS_DCCH+DTCH E-DCH/HS-DSCH (state 6-18) under condition A25c, as specified in clause 7.4 of TS 34.1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.78.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Success (simultaneous activation and deactivation of 3C-HSDPA or 4C-HSDPA, MIMO and 64QAM) | NOTE: The Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH for 3C-HSDPA and 4C-HSDPA have been split in to Single band 3C-HSDPA, 3C-HSDPA Dual band (1-2), 3C-HSDPA Dual band(2-1), 4C-HSDPA Dual Band(3-1) and 4C-HSDPA, Dual Band(2-2). The test cases are designed to cover number of MIMO carrier co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA Single Band, 64 QAM and MIMO | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1.1 Definition and applicability | UE categories (Cat 30 or Cat 32) which support combination of 3C-HSDPA or 4C-HSDPA, MIMO and 64 QAM.
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1.2 Conformance requirement | ….
If the UE receives:
....
- a RADIO BEARER RECONFIGURATION message; or
….
it shall:
….
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> if COMMON_E_DCH_TRANSMISSION is set to FALSE before entering CELL_DCH state or IE "E-DCH info" is not inclu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1.3 Test purpose | 1. To confirm that the UE configures the physical channels, transits from CELL_DCH to CELL_FACH, and to stop simultaneous 64QAM and MIMO reception over multi Carriers according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters, transits from CELL_FA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1.4 Method of test | Initial Condition
System Simulator: 3 cells –Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – Three Carriers (One Anchor Carrier and Two Secondary Carriers) on DL Band A and no Carriers on DL Band B (Single Band 3C- HSDPA) where f1, f2 and f3 are adjacent... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.1.5 Test requirements | At step 2 and 4 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7 the UE shall transmit three composite CQI/PCI reports of Type A.
At step 6, 10 and 13 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA Dual Bands, 64 QAM and MIMO (1-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2.1 Definition and applicability | UE categories (Cat 30 or Cat 32) which support combination of 3C-HSDPA or 4C-HSDPA, MIMO and 64 QAM.
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2.2 Conformance requirement | Same as subclause 8.2.2.79.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2.3 Test purpose | Same as subclause 8.2.2.79.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2.4 Method of test | Initial Condition
System Simulator: 3 cells –Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – One Anchor Carrier on DL Band A and Two Secondary Carriers on DL Band B (Dual Band 3C-HSDPA) where f2 and f3 are adjacent frequencies on Band B
(Ref. to Table 5.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.2.5 Test requirements | Same as subclause 8.2.2.79.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA Dual Bands, 64 QAM and MIMO (2-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3.1 Definition and applicability | UEs (Cat 30 or Cat 32) which support combination of 3C-HSDPA or 4C-HSDPA, MIMO and 64 QAM.
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3.2 Conformance requirement | Same as subclause 8.2.2.79.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3.3 Test purpose | Same as subclause 8.2.2.79.1.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3.4 Method of test | Initial Condition
System Simulator: 3 cells –Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – One Anchor Carrier and One Secondary Carrier on DL Band A and One Secondary Carrier on DL Band B (Dual Band 3C-HSDPA) where f1 and f2 are adjacent frequencies on... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.3.5 Test requirements | Same as subclause 8.2.2.79.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 4C-HSDPA Dual Bands, 64 QAM and MIMO (3-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4.1 Definition and applicability | UEs (Cat 32) which support combination of 4C-HSDPA, MIMO and 64 QAM.
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4.2 Conformance requirement | Same as subclause 8.2.2.79.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4.3 Test purpose | Same as subclause 8.2.2.79.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4.4 Method of test | Initial Condition
System Simulator: 4 cells –Cell 1/2/3/4 4C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier) and Cell 2 (f2), Cell 3 (f3) and Cell 4 (f4) (Secondary Carriers) – Three Carriers (One Anchor Carrier and Two Secondary Carriers) on DL Band A and One Secondary Carrier on DL Band B (Dual Band 4C-HSDPA) where f... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.4.5 Test requirements | At step 2 and 4 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7 the UE shall transmit four composite CQI/PCI reports of Type A.
At step 6, 10, 13 and 16 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 4C-HSDPA Dual Bands, 64 QAM and MIMO (2-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5.1 Definition and applicability | UEs (Cat 32) which support combination of 4C-HSDPA, MIMO and 64 QAM.
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5.2 Conformance requirement | Same as subclause 8.2.2.79.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5.3 Test purpose | Same as subclause 8.2.2.79.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5.4 Method of test | Initial Condition
System Simulator: 4 cells –Cell 1/2/3/4 4C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier) and Cell 2 (f2), Cell 3 (f3) and Cell 4 (f4) (Secondary Carriers) – Two Carriers (One Anchor Carrier and One Secondary Carrier) on DL Band A and Two Secondary Carriers on DL Band B (Dual Band 4C-HSDPA) where f1 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.79.5.5 Test requirements | Same as subclause 8.2.2.79.4.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA and 4C-HSDPA for different bands and 64 QAM | NOTE: The Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH for 3C-HSDPA and 4C-HSDPA have been split in to Single band 3C-HSDPA, 3C-HSDPA Dual band (1-2), 3C-HSDPA Dual band(2-1), 4C-HSDPA Dual Band(3-1) and 4C-HSDPA Dual Band(2-2). The test cases are designed to cover number of 64QAM carrier co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA and for Single Band and 64 QAM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1.1 Definition and applicability | UE categories (Cat 29, 30, 31 and 32) which support combination of 3C-HSDPA or 4C-HSDPA and 64 QAM
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1.2 Conformance requirement | …
If the UE receives:
...
- a RADIO BEARER RECONFIGURATION message; or
it shall:
…
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> if COMMON_E_DCH_TRANSMISSION is set to FALSE before entering CELL_DCH state or IE "E-DCH info" is not included in... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1.3 Test purpose | 1. To confirm that the UE configures the physical channels, transits from CELL_DCH to CELL_FACH, and stops simultaneous 64QAM reception over multi Carriers according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters, transits from CELL_FACH to CELL_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1.4 Method of test | Initial Condition
System Simulator: 3 cells –Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – Three Carriers (One Anchor Carrier and Two Secondary Carriers) on DL Band A and no Carriers on DL Band B (Single Band 3C-HSDPA) where f1, f2 and f3 are adjacent ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.1.5 Test requirements | At step 2 and 4 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7 the UE shall transmit three CQI reports.
At step 6, 10 and 13 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA Dual Band and 64 QAM (1-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2.1 Definition and applicability | UE categories (Cat 29, 30, 31 and 32) which support combination of 3C-HSDPA or 4C-HSDPA and 64 QAM
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2.2 Conformance requirement | Same as subclause 8.2.2.80.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2.3 Test purpose | Same as subclause 8.2.2.80.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2.4 Method of test | Initial Condition
System Simulator: Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – One Anchor Carrier on DL Band A and Two Secondary Carriers on DL Band B (Dual Band 3C-HSDPA) where f2 and f3 are adjacent frequencies on Band B.
SS: Table 5.0aB and Table... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.2.5 Test requirements | Same as subclause 8.2.2.80.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 3C-HSDPA Dual Band and 64 QAM (2-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3.1 Definition and applicability | UE categories (Cat 29, 30, 31 and 32) which support combination of 3C-HSDPA or 4C-HSDPA and 64 QAM
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3.2 Conformance requirement | Same as subclause 8.2.2.80.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3.3 Test purpose | Same as subclause 8.2.2.80.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3.4 Method of test | Initial Condition
System Simulator: Cell 1/2/3 3C-HSDPA cell(s) with Cell 1 (f1) (Anchor Carrier), Cell 2 (f2) and Cell 3 (f3) (Secondary Carriers) – One Anchor Carrier and One Secondary Carrier on DL Band A and One Secondary Carriers on DL Band B (Dual Band 3C-HSDPA) where f2 is adjacent frequency to f1 on Band A.
SS:... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.3.5 Test requirements | Same as subclause 8.2.2.80.1.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 4C-HSDPA for Dual Bands and 64 QAM (3-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4.1 Definition and applicability | UE categories (Cat 31 and 32) which support combination of 4C-HSDPA and 64 QAM
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4.2 Conformance requirement | Same as subclause 8.2.2.80.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4.3 Test purpose | Same as subclause 8.2.2.80.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4.4 Method of test | Initial Condition
System Simulator: Cell 1/2/3/4 4C-HSDPA cell(s) with Cell 1(f1) (Anchor Carrier) and Cell 2 (f2), Cell 3 (f3) and Cell 4 (f4) (Secondary Carriers) – Three Carriers (One Anchor Carrier and Two Secondary Carriers) on DL Band A and One Secondary Carrier on DL Band B (Dual Band 4C-HSDPA) where f1, f2 and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.4.5 Test requirements | At step 2 and 4 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7 the UE shall transmit four CQI reports.
At step 6, 10, 13 and 16 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5 Radio Bearer Reconfiguration for transition between CELL_FACH & CELL_DCH: Successful Activation and Deactivation of 4C-HSDPA for Dual Bands and 64 QAM (2-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5.1 Definition and applicability | UE categories (Cat 31 and 32) which support combination of 4C-HSDPA and 64 QAM
UE supports FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5.2 Conformance requirement | Same as subclause 8.2.2.80.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5.3 Test purpose | Same as subclause 8.2.2.80.1.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5.4 Method of test | Initial Condition
System Simulator: Cell 1/2/3/4 4C-HSDPA cell(s) with Cell 1(f1) (Anchor Carrier) and Cell 2 (f2), Cell 3 (f3) and Cell 4 (f4) (Secondary Carriers) – Two Carriers (One Anchor Carrier and One Secondary Carriers) on DL Band A and Two Secondary Carriers on DL Band B (Dual Band 4C-HSDPA) where f1 and f2 ar... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.80.5.5 Test requirements | Same as subclause 8.2.2.80.4.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81 Radio Bearer Reconfiguration: 3C or 4C Activation by Serving Cell Change from non 3C-HSDPA or 4C-HSDPA capable cell to a 3C-HSDPA or 4C-HSDPA capable cell | NOTE The Radio Bearer Reconfiguration test case 8.2.2.81 for 4C-HSDPA has been split in to Single band and Dual Band test cases. The test cases have been designed to cover 3C-HSDPA / 4C-HSDPA carrier combinations that will enable testing of all UEs supporting FDD HS-DSCH physical layer categories 29, 30, 31 or 32. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1 Radio Bearer Reconfiguration: 3C Activation by Serving Cell Change from non 3C-HSDPA capable cell to a 3C-HSDPA capable cell/Single Band | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1.1 Definition and applicability | UE categories (Cat 29, Cat 30, Cat 31 or Cat 32) which support combination of 3C-HSDPA or 4C-HSDPA.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1.2 Conformance requirement | The purpose of the active set update procedure is to update the active set of the connection between the UE and UTRAN. This procedure shall be used in CELL_DCH state. The UE should keep on using the old RLs while configuring the new RLs. Also the UE should keep the transmitter turned on during the procedure. This proce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1.3 Test purpose | To confirm that the UE performs HS-DSCH serving cell change from non 3C-HSDPA capable cell to 3C-HSDPA Single band carrier combination with 3 carriers’ capable cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1.4 Method of test | Initial Condition
System Simulator: 4 Cells configured as per Table 5.0aB of TS 25.101 and below configurations.
Cell 1 non 3C-HSDPA cell on DL BandA,
Cell 2/3/4 3C HSDPA cell(s) with Cell 2(Anchor Carrier), Cell 3 and Cell 4 (Secondary Carriers) – One Anchor Carrier and Two Secondary Carriers on DL Band A (Single Ban... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.1.5 Test requirements | At step 2 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At step 4 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message to SS.
At step 7 the UE shall transmit an RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.2 Radio Bearer Reconfiguration: 3C Activation by Serving Cell Change from non 3C-HSDPA capable cell to 3C-HSDPA capable cell/Dual Band (1-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.81.2.1 Definition and applicability | UE categories (Cat 29, Cat 30, Cat 31 or Cat 32) which support combination of 3C-HSDPA or 4C-HSDPA and 64 QAM.
UE supports FDD and Dual Band carrier combination (1,2). |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.