hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 6.
After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_FACH and from CELL_FACH to CELL_DCH: Success (frequency modification, start and stop of HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE was in CELL_DCH state upon reception of the reconfiguration message and remains in CELL_DCH state... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40.3 Test purpose | To confirm that the UE transits to CELL_FACH state from CELL_DCH state in another cell and frequency and stops receiving the HS-DSCH according to the received RADIO BEARER RECONFIGURATION message.
To confirm that the UE transits to CELL_DCH state from CELL_FACH state in another cell and frequency and starts receiving t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 and 6 are active.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
Table 8.2.2.40
Paramete... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.40.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message using AM RLC on the uplink DCCH in cell 6.
After step 4, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message using AM RLC on the uplink DCCH in cell 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start and stop of HS-DSCH reception, during an active CS bearer) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41.1 Definition and applicability | All UEs which support FDD or TDD, HS-PDSCH and simultaneous CS domain speech or transparent CS data services and PS services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41.3 Test purpose | To confirm that the UE starts and stops receiving the HS-DSCH according to the received RADIO BEARER RECONFIGURATION message when a circuit-switched radio bearer is established and mapped to DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports CS domain speech or transparent CS data services and PS services
Test Procedure
The UE has only signalling radio bea... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.41.5 Test requirements | After step 4, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 7, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Timing re-initialised hard handover to another frequency, start and stop of HS-DSCH reception, during an active CS bearer) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42.1 Definition and applicability | All UEs which support FDD or TDD, HS-PDSCH and simultaneous CS domain speech or transparent CS data services and PS services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42.3 Test purpose | To confirm that the UE starts and stops receiving the HS-DSCH in conjunction with a interfrequency hard handover without prior measurement on the target frequency according to the received RADIO BEARER RECONFIGURATION message when a circuit-switched radio bearer is established and mapped to DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
UE: PS_DCCH_DTCH_HS_DSCH (state 6-17) as specified in clause 7.4 of TS 34.108.
System Information Block type 1 (Cell 1 and Cell 6)
Use the default system information block with the same type specified in clause 6.1 of TS 34.108, with t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.42.5 Test requirements | After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 6.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Seamless SRNS relocation, without pending of ciphering, frequency modification) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43.2 Conformance requirement | 1> if the reconfiguration procedure is simultaneous with SRNS relocation procedure:
2> if the transmitted message is a RADIO BEARER RECONFIGURATION:
3> include the IE "New U-RNTI".
The UE shall:
1> if the received reconfiguration message is a RADIO BEARER RECONFIGURATION and the IE "New U-RNTI" is included:
2> re-esta... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43.3 Test purpose | 1. To confirm that the UE performs a combined inter-frequency hard handover and SRNS relocation and then transmit a RADIO BEARER RECONFIGURATION COMPLETE message in the new cell.
2. To confirm that the UE correctly applies integrity protection after the SRNS relocation.
3. To confirm that the UE accepts a gap in the do... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 and 6
UE: PS-DCCH+DTCH_DCH (state 6-10) or CS-DCCH+DTCH_DCH (state 6-9) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
Table 8.2.2.43
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA RF Channel Number
Mid Range... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.43.5 Test requirement | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC which includes a calculated new START value according to the formula “STARTX' = MSB20 (MAX {COUNT-C, COUNT-I | radio bearers and signalling radio bearers using the most recently configured CKX and IKX}) +... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (With active E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are met:
1> t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44.3 Test purpose | To confirm that the UE reconfigures radio bearer parameters during active E-DCH transmission according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A12, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE supports E-PUCH (TDD only)
Test Procedure
The UE is in ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.44.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
8.2.2.44a Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (With active E-DCH transmission, F-DPCH configured)
8.2.2.44a.1 Definition and applicability
All UEs which support FDD and HS-PDSCH and E-DPDCH and fully support... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (start and stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH or all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions are met:
1> the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45.3 Test purpose | 1 To confirm that the UE reconfigures radio bearer parameters, transits from CELL_FACH to CELL_DCH state, and starts E-DCH transmission according to the received RADIO BEARER RECONFIGURATION message.
2 To confirm that the UE reconfigures radio bearer parameters, transits from CELL_DCH to CELL_FACH state, and stops E-D... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A13 (FDD or 3.84Mcps TDD or 7.68Mcps TDD )/A11(1.28Mcps TDD) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.45.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
8.2.2.45a Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (start and stop of E-DCH transmiss... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (hard handover to another frequency, start and stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH or all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions are met:
1> the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46.3 Test purpose | To confirm that the UE starts and stops transmitting the E-DCH, while maintaining HS-DSCH reception, in conjunction with a interfrequency hard handover without prior measurement on the target frequency according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 and 6 are active.
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A12 (FDD or 3.84Mcps TDD or 7.68Mcps TDD )/A11(1.28Mcps TDD) in cell 1 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.46.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 6.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 1.
8.2.2.46a Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH Success (inter-band frequency hard handover, start... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (frequency modification, start and stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47.1 Definition | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are met:
1> t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47.3 Test purpose | 1) To confirm that the UE reconfigures radio bearer parameters, transits from CELL_DCH to CELL_FACH state with frequency modification and stops E-DCH transmission according to the received a RADIO BEARER RECONFIGURATION message.
2) To confirm that the UE reconfigures radio bearer parameters, transits from CELL_FACH t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
UE: PS_DCCH_DTCH_E-DCH/HS-DSCH (state 6-18) under condition A13, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statements
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE supports E-PU... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.47.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
8.2.2.47a Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (frequency modification, start and... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start and stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…….
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are met:
1>... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48.3 Test purpose | 1. To confirm that the UE reconfigures the radio bearer parameters and stops E-DCH transmission according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters and starts E-DCH transmission according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A12 (FDD) /A11(1.28Mcps TDD), as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE supports E-PUCH (TDD only)
Tes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.48.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_PCH: Success (stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49.1 Definition and applicability | All UEs which support FDD, HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are met:
1> t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49.3 Test purpose | To confirm that the UE reconfigures radio bearer parameters, transits from CELL_DCH to CELL_PCH state, and stops E-DCH transmission and HS-DSCH reception according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A13 (FDD) /A12 (1.28Mcps TDD) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.49.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (from speech to speech plus PS data with modification of downlink spreading factor) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50.2 Conformance requirement | If the UE receives:
- a RADIO BEARER SETUP message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (FDD only);
1> act upon all received information e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50.3 Test purpose | To confirm that the UE reconfigures the radio bearers according to a RADIO BEARER RECONFIGURATION message, which indicates a change of radio bearer configuration from a single radio bearer (speech) to a multi radio bearer configuration (speech + PS data) including reconfiguration of downlink spreading factor. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: Idle state (State 7) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is brought to the CELL_DCH state after a successful incoming call attempt. The SS follows the procedure in TS 34.108 clause 7.1.3 (Mobile Terminated), to set up a user radio bearer, but wi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.50.5 Test requirement | At step 16 the UE shall return data on the speech RB in uplink with the same content as sent by the SS in downlink.
At step 26 the UE shall return data on the speech RB and the PS RB in uplink with the same content as sent by the SS in downlink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (With active discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51.3 Test purpose | To confirm that the UE reconfigures radio bearer parameters during active DPCCH discontinuous transmission according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
The UE is in CELL_DCH state and has a user radio bearer mappe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.51.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 3 the time between 11 consecutive CQI indications shall be 320ms if 2ms TTI is used, or 400ms if 10ms TTI is used. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (start and stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52.3 Test purpose | 1 To confirm that the UE reconfigures radio bearer parameters, transits from CELL_FACH to CELL_DCH state, and starts E-DCH / DPCCH discontinuous transmission according to the received RADIO BEARER RECONFIGURATION message.
2 To confirm that the UE reconfigures radio bearer parameters, transits from CELL_DCH to CELL_FAC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Proced... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.52.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (hard handover to another frequency, start and stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53.3 Test purpose | To confirm that the UE starts and stops transmitting the E-DCH (with DTX), while maintaining HS-DSCH reception, in conjunction with a interfrequency hard handover without prior measurement on the target frequency according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 and 6 are active.
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20 in cell 1 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
Table 8.2.2.53
Parameter
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.53.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 6.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message in cell 1.
At step 7 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH and CELL_DCH to CELL_FACH: Success (frequency modification, start and stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54.1 Definition | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54.3 Test purpose | 1) To confirm that the UE reconfigures radio bearer parameters, transits from CELL_DCH to CELL_FACH state with frequency modification and stops E-DCH / DPCCH discontinuous transmission according to the received a RADIO BEARER RECONFIGURATION message.
2) To confirm that the UE reconfigures radio bearer parameters, tra... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
UE: PS_DCCH_DTCH_E-DCH/HS-DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statements
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
Table 8.2.2.54
Para... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.54.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 5 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start and stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55.3 Test purpose | 1. To confirm that the UE reconfigures the radio bearer parameters and stops E-DCH / DPCCH discontinuous transmission according to the received RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures the radio bearer parameters and starts E-DCH / DPCCH discontinuous transmission according to the re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
The UE is in CELL_DCH state and has a user radio bearer mappe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.55.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
At step 7 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.56 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_PCH: Success (stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.56.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.56.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.