hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.5.5 Test requirements | After step 1 the UE shall enter CC state U4, "Call delivered". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6 Outgoing call / U1 call initiated / entering state U10 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6.1 Definition | The call control entity of the UE being in the state, U1, a CONNECT message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6.2 Conformance requirement | The call control entity of the UE in the "call initiated" state, in the "mobile originating call proceeding" state or in the "call delivered" state, shall, upon receipt of a CONNECT message:
- attach the user connection;
- return a CONNECT ACKNOWLEDGE message;
- stop any locally generated alerting indication (if applie... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6.3 Test purpose | To verify that a CC entity of the UE in CC-state U1, "Call initiated", upon receipt of a CONNECT message, sends a CONNECT ACKNOWLEDGE message to its peer entity and enters CC state U10, "Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U1 by using table 10.1.2/4.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.6.5 Test requirements | After step 1 the UE shall send a CONNECT ACKNOWLEDGE message and shall enter CC state U10, "Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7 Outgoing call / U1 call initiated / unknown message received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7.1 Definition | The call control entity of the UE being in the state, U1, an unknown message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7.2 Conformance requirement | If a UE receives an RR, MM or CC message with message type not defined for the PD or not implemented by the receiver in acknowledged mode, it shall return a status message (STATUS, MM STATUS depending on the protocol discriminator) with cause # 97 "message type non-existent or not implemented".
References
TS 24.008 cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7.3 Test purpose | To verify that a CC entity of the UE in CC-state U1, "Call initiated", upon receipt of a message with message type not defined for the protocol discriminator from its peer entity returns a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U1 by using table 10.1.2/1.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.3.7.5 Test requirements | After step 1 and step 3 the UE shall return a STATUS message with "Call state" set to state U1, "Call initiated". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4 Outgoing call / U3 Mobile originating call proceeding | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1 Outgoing call / U3 Mobile originating call proceeding / ALERTING received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1.1 Definition | The call control entity of the UE being in the state, U3, an ALERTING message is sent to the UE as an indication that a call is being alerted at a called end. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1.2 Conformance requirement | When the call control entity of the UE in the "call initiated" state or "mobile originating call proceeding" state receives an ALERTING message then, the call control entity of the UE shall stop timer T303 and T310 (if running) and shall enter the "call delivered" state.
References
TS 24.008 clause 5.2.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a ALERTING message enters CC-state U4, "Call Delivered". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.1.5 Test requirements | After step 1 the UE shall enter CC-state U4, "Call Delivered". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2 Outgoing call / U3 Mobile originating call proceeding / CONNECT received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2.1 Definition | The call control entity of the UE being in the state, U3, a CONNECT message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2.2 Conformance requirement | The call control entity of the UE in the "call initiated" state, in the "mobile originating call proceeding" state or in the "call delivered" state, shall, upon receipt of a CONNECT message:
- attach the user connection;
- return a CONNECT ACKNOWLEDGE message;
- stop any locally generated alerting indication (if applie... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a CONNECT message returns a "CONNECT ACKNOWLEDGE" message to its peer entity and enters the CC state U10, "Active".
2) To verify that the UE stops locally generated alerting indication, if any. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.2.5 Test requirements | After step 1 the UE shall return a "CONNECT ACKNOWLEDGE" message and enter the CC state U10, "Active".
The UE shall stop locally generated alerting indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3 Outgoing call / U3 Mobile originating call proceeding / PROGRESS received without in band information | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3.1 Definition | The call control entity of the UE being in the state, U3, a PROGRESS message is received by the UE. The PROGRESS message does not contain indication of in-band information availability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3.2 Conformance requirement | 1) In order to inform the UE that the call is progressing in the PLMN/ISDN environment the network may send a progress indicator information element to the calling UE either:
a) in an appropriate call control message, if a state change is required (e.g., ALERTING or CONNECT); or
b) in the PROGRESS message, if no state ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a PROGRESS message with valid cause values stays in CC-state U3.
2) To verify that after receipt of the PROGRESS message timer T310 is stopped. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.3.5 Test requirements | After step 1 the UE shall stay in CC-state U3.
After step 3 SS waits at least 45 s and checks no DISCONNECT is sent by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4 Outgoing call / U3 Mobile originating call proceeding / PROGRESS with in band information | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4.1 Definition | The call control entity of the UE being in the state, U3, a PROGRESS message indicating availability of in band information is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4.2 Conformance requirement | 1) When the network wants to make the UE attach the user connection (e.g. in order to provide in-band tones/announcement) before the UE has reached the "active" state of a call, the network may include a progress indicator IE indicating user attachment in a suitable CC message:
- Either it includes the IE in a SETUP, C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a PROGRESS message indicating in-band announcement through-connects the traffic channel for speech, if DTCH is in speech mode. If DTCH is not in a speech mode, the UE does not through-connect the DTCH.
2) To ve... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.4.5 Test requirements | After step 2 the UE shall through-connect the traffic channel for speech, if DTCH is in a speech mode. If DTCH is not in speech mode, the UE shall not through-connect the DTCH.
After step 4 the SS waits at least 45 s and checks no DISCONNECT is sent by the UE.
After step 7 the SS checks that the user connection for spe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5 Outgoing call / U3 Mobile originating call proceeding / DISCONNECT with in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5.1 Definition | The call control entity of the UE being in the state, U3, a DISCONNECT message indicating availability of in band information is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon receipt of a DISCONNECT message with progress indicator #8:
i) if an appropriate speech traffic channel is not connected, continue clearing as defined in TS24.008 claus... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a DISCONNECT with progress indicator #8 through-connects the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE sends a RELEASE mess... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.5.5 Test requirements | After step 2 the UE shall through-connect the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE shall send a RELEASE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6 Outgoing call / U3 Mobile originating call proceeding / DISCONNECT without in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6.1 Definition | The call control entity of the UE being in the state, U3, a DISCONNECT message is received by the UE. The DISCONNECT message does not contain indication of in-band information availability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon the receipt of a DISCONNECT message without progress indicator information element or with progress indicator different from #8:
- stop all running call control timers;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a DISCONNECT without progress indicator returns a RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.6.5 Test requirements | After step 1 the UE shall send a RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7 Outgoing call / U3 Mobile originating call proceeding / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7.1 Definition | The call control entity of the UE being in the state, U3, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null".
2) To verify that the UE on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobil... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.7.5 Test requirements | After step 1 the UE shall send a RELEASE COMPLETE message.
After step 3 CC entities relating to all mobile originating transaction identifiers shall send RELEASE COMPLETE messages with cause value #81 (invalid TI value). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8 Outgoing call / U3 Mobile originating call proceeding / termination requested by the user | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8.1 Definition | The call control entity of the UE being in the state, U3, the user requests to terminate the call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8.2 Conformance requirement | Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sending a DISCONNECT message; starting timer T305; and entering the "disconnect request" state.
References
TS 24.008 clause 5.4.3.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator: 1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.8.5 Test requirements | After step 1 the UE shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9 Outgoing call / U3 Mobile originating call proceeding / traffic channel allocation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9.1 Definition | The call control entity of the UE being in the state, U3, a radio bearer establishment procedure is performed. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9.2 Conformance requirement | It is a network dependent decision when to initiate the assignment of an appropriate traffic channel during the mobile originating call establishment phase. Initiation of a suitable RR procedure to assign an appropriate traffic channel does neither change the state of a call control entity nor affect any call control t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding", when a traffic channel is allocated by the network performing the radio bearer establishment procedure, stays in CC-state U3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.9.5 Test requirements | After step 1 the CC state U3, "Mobile Originating Call Proceeding", shall remain unchanged. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10 Outgoing call / U3 Mobile originating call proceeding / timer T310 time-out | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10.1 Definition | The call control entity of the UE being in the state, U3, if no response is then received from the SS, timer T310 expires at the UE side. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10.2 Conformance requirement | 1) If timer T310 elapses before any of the ALERTING, CONNECT or DISCONNECT messages has been received, the UE shall perform the clearing procedure described in TS 24.008 clause 5.4.
2) Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding" will, upon expiry of timer T310, initiate call release by sending DISCONNECT and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.10.5 Test requirements | After step 1 upon expiry of timer T310 the UE shall initiate call release by sending a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11 Outgoing call / U3 Mobile originating call proceeding / lower layer failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11.1 Definition | The call control entity of the UE being in the state, U3, a lower layer failure is accomplished at the UE and consequently, communication at layer 3 level with the peer entity is terminated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11.2 Conformance requirement | The MM sublayer shall indicate to all CM entities associated with active MM connections that the MM connection is interrupted, the subsequent action of the MM sublayer (call re-establishment, see TS 24.008 clause 4.5.1.6, or local release) will then depend on the decisions by the CM entities.
….
The re-establishment pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding" having detected a lower layer failure and having returned to idle mode, the CC entity is in state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/4.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.11.5 Test requirements | After step 4 the UE shall not initiate RRC Connection Establishment for 60 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12 Outgoing call / U3 Mobile originating call proceeding / unknown message received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12.1 Definition | The call control entity of the UE being in the state, U3, an unknown message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12.2 Conformance requirement | If a UE receives an RR, MM or CC message with message type not defined for the PD or not implemented by the receiver in acknowledged mode, it shall return a status message (STATUS, MM STATUS depending on the protocol discriminator) with cause # 97 "message type non-existent or not implemented".
References
TS 24.008 cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12.3 Test purpose | To verify that a CC-entity of the UE in CC-state U3, "Mobile Originating Call Proceeding" having received an unknown message from its peer entity returns a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U3 by using table 10.1.2/1.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.12.5 Test requirements | After step 1 the UE shall return a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13 Outgoing call / U3 Mobile originating call proceeding / Internal alerting indication | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13.1 Definition | The call control entity of the UE being in the state, U3, an ALERTING message is sent to the UE when the user connection is not attached to the radio path. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13.2 Conformance requirement | When the call control entity of the UE in the "call initiated" state or "mobile originating call proceeding" state receives an ALERTING message then, the call control entity of the UE shall stop timer T303 and T310 (if running) and shall enter the "call delivered" state. In this state, for speech calls:
- an alerting i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13.3 Test purpose | When the call control entity of the UE in the "mobile originating call proceeding" state receives an ALERTING message then it enters "call delivered" state and, for speech calls, if the user connection is not attached to the radio path, the UE generates internally an alerting indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
- way to give internally generated alerting indication for outgoing calls.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.4.13.5 Test requirements | After step 1 the UE shall enter "Call Delivered" state and, for speech calls, if the user connection is not attached to the radio path, the UE shall internally generate an alerting indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5 Outgoing call / U4 call delivered | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1 Outgoing call / U4 call delivered / CONNECT received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1.1 Definition | The call control entity of the UE being in the state, U4, a CONNECT message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1.2 Conformance requirement | The call control entity of the UE in the "call initiated" state, in the "mobile originating call proceeding" state or in the "call delivered" state, shall, upon receipt of a CONNECT message:
- attach the user connection;
- return a CONNECT ACKNOWLEDGE message;
- stop any locally generated alerting indication (if applie... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", upon receipt of the CONNECT message returns a CONNECT ACKNOWLEDGE to its peer entity and enters the CC-state U10, "Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.1.5 Test requirements | After step 1 the UE shall return a CONNECT ACKNOWLEDGE message and enter the CC state U10, "Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2 Outgoing call / U4 call delivered / termination requested by the user |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.