hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1.4 Method of test | Initial conditions
- System Simulator:
- four cells A, B, C and D, belonging to different location areas with location identification a, b, c and d. Their country codes and mobile network codes are defined as follows:
Cell
Cell No.
MCC
MNC
Test channel
A
1
001
01
1
B
2
022
02
2
C
7
001
10
3
D
4
001
11
4
E
3
001
30
-
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1.5 Test requirement | 1. At step 8c, the UE shall not send any LOCATION UPDATING REQUEST on cell C.
2. At step 8c, the UE shall not send any LOCATION UPDATING REQUEST on cell B.
3. At step 13 the UE shall send a LOCATION UPDATING REQUEST message on Cell A within 7mins. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2 Location updating / periodic search for HPLMN or higher priority PLMN / UE in manual mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2.2 Conformance requirement | The periodic attempts shall only be performed if in automatic mode when the UE is in a VPLMN.
References
TS 22.011 clause 3.2.2.5. and TS 23.122 clause 4.4.3.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2.3 Test purpose | To verify that no Search for HPLMN or Higher Priority PLMN is performed when the UE is not in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2.4 Method of test | Initial conditions
- System Simulator:
- two cells A and B, belonging to different location areas with location identification a and b. Cell A shall be a cell of the HPLMN and Cell B shall be a cell of the VPLMN with a Country Code the same as that of Cell A. Initially Cell A shall not be broadcasting. IMSI attach/deta... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.2.5 Test requirement | At step 11 the UE shall not attempt to perform a location update. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3 Location updating / periodic search for HPLMN or higher priority PLMN / UE waits at least two minutes and at most T minutes | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3.2 Conformance requirement | After switch on, the UE waits at least 2 minutes and at most T minutes before the first Search for HPLMN or higher priority PLMN is attempted.
References
TS 22.011 clause 3.2.2.5. and TS 23.122 4.4.3.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3.3 Test purpose | To verify that the UE waits at least 2 minutes and at most T minutes before attempting its first Search for HPLMN or higher priority PLMN. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3.4 Method of test | Initial Conditions
- System Simulator:
- two cells A and B, belonging to different location areas with location identification a and b. Cell A shall be a cell of the HPLMN and Cell B shall be a cell of the VPLMN with a Country Code the same as that of Cell A. Initially Cell A shall not be broadcasting. IMSI attach/deta... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.3.5 Test requirement | At step 11 the UE shall attempt to perform a location update.
9.4.5.4.4 Location updating/periodic search of the higher priority PLMN, VPLMN in a foreign country – higher priority/UE is in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.4.2 Conformance requirement | A UE in Automatic Mode shall make periodic attempts to look for a higher priority PLMN of the same country as the currently received PLMN.
References
TS 22.011 clause 3.2.2.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.4.3 Test purpose | To verify that the UE selects the highest priority network if the HPLMN/higher priority PLMN Search is performed, when a UE is receiving foreign country’s VPLMN and UE is in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.4.4 Method of test | Initial conditions
- System Simulator:
- Three cells A, B and C, belonging to different location areas with location identification a, b and c. Cell A shall be a cell of the HPLMN, Cell B shall be a cell of the VPLMN with a different Mobile Country Codes that of Cell A and Cell C shall be a cell of a higher priority VP... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.4.5 Test requirement | 1. At step 10, the UE shall not send any LOCATION UPDATING REQUEST on Cell A.
2. At step 11, the UE shall send a LOCATION UPDATING REQUEST message on Cell C.
9.4.5.4.5 Location updating/periodic search of the higher priority PLMN, VPLMN in a foreign country – lower priority/UE is in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.5.2 Conformance requirement | A UE in Automatic Mode shall make periodic attempts to look for a higher priority PLMN of the same country as the currently received PLMN. The MS shall not select a lower priority PLMN of the same country as the currently received PLMN.
References
TS 22.011 clause 3.2.2.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.5.3 Test purpose | To verify that the UE remains on the highest priority network if the HPLMN/higher priority PLMN Search is performed, when a UE is receiving foreign country’s VPLMN and UE is in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.5.4 Method of test | Initial conditions
- System Simulator:
- Three cells A, B and C, belonging to different location areas with location identification a, b and c. Cell A shall be a cell of the HPLMN, Cell B shall be a cell of the VPLMN with a different Mobile Country Codes that of Cell A and Cell C shall be a cell of a lower priority VPL... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.5.5 Test requirement | 1. At step 10, the UE shall not send any LOCATION UPDATING REQUEST on Cell A or Cell C.
9.4.5.4.6 Location updating/periodic search of the higher priority PLMN, VPLMN in a foreign country – List of EPLMN contain HPLMN /UE is in automatic mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.6.2 Conformance requirement | A UE in Automatic Mode shall make periodic attempts to look for a higher priority PLMN of the same country as the currently registered PLMN. For the ranking of PLMNs the UE shall use the order used in subclause 3.2.2.2. In the case that the MS has stored a list of equivalent PLMNs, the UE shall only select a PLMN if it... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.6.3 Test purpose | To verify that, in automatic mode, when registered on a VPLMN of a country different to it’s HPLMN, the MS only selects the highest priority network available from upon those of the same country as the serving PLMN. It also verifies that the MS does not take into account PLMNs, including the HPLMN, which are included i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.6.4 Method of test | Initial conditions
- System Simulator:
- Three cells; Cell A be mapped to Cell 1, Cell B mapped to Cell 4, Cell C mapped to Cell 7, as found in TS 34.108 clause 6.1.4.2.
- Three cells A, B and C, belonging to different location areas with location identification a, b and c. Cell A shall be a cell of the HPLMN, Cell B s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.6.5 Test requirement | 1. At step 10, the UE shall not send any LOCATION UPDATING REQUEST on Cell A.
2. At step 11, the UE shall send a LOCATION UPDATING REQUEST message on Cell C. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7 Location updating / periodic search for HPLMN or higher priority PLMN / UE waits UE waits Minimum Periodic search timer | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7.2 Conformance requirement | 1. In the case that the mobile has a stored "Equivalent PLMNs" list the mobile shall only select a PLMN if it is of a higher priority than those of the same country as the current serving PLMN which are stored in the "Equivalent PLMNs" list.
2. In steps i), ii) and iii) of the Automatic Network Selection Mode Procedure... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7.3 Test purpose | To verify that if a UE is camped on a VPLMN it will perform a search for higher priority networks (e.g. HPLMN) with a periodicity of T, where T is the largest value of the Search Period stored in the USIM and the Minimum Periodic search timer, if present.
This test will confirm that, if a cell from a new PLMN becomes a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7.4 Method of test | Initial conditions
- System Simulator:
- four cells A, B, C and D, belonging to different location areas with location identification a, b, c and d. Their country codes and mobile network codes are defined as follows:
Cell
Cell No.
MCC
MNC
Test channel
A
1
001
01
1
B
2
022
02
2
C
7
001
10
3
D
4
001
11
4
E
3
001
30
-
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.7.5 Test requirement | 1. At step 12, the UE shall not send any LOCATION UPDATING REQUEST on cell C.
2. At step 12, the UE shall not send any LOCATION UPDATING REQUEST on cell B.
3. At step 15 the UE shall send a LOCATION UPDATING REQUEST message on Cell A within 8 minutes. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5 Location updating / periodic per-device timer | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5.2 Conformance requirement | Periodic updating may be used to notify periodically the availability of the mobile station to the network. Periodic updating is performed by using the location updating procedure. The location updating type information element in the LOCATION UPDATING REQUEST message shall indicate periodic updating.
The procedure is ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5.3 Test purpose | To verify that the UE uses the per-device timer value for Periodic Location Area Update broadcast by the network. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5.4 Method of test | Initial conditions
- System Simulator:
- one cell, T3212 is set to 30 minutes;
- IMSI attach is allowed in the cell;
- User Equipment:
- the UE is deactivated. The stored MCC, MNC and LAC correspond to the broadcasted values. The stored update status is "updated".
- The UE is equipped with a USIM containing default val... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.5.5 Test requirements | At Step 2, UE shall send RRC CONNECTION REQUEST message with "Establishment cause": delayTolerantAccess
At step 5, UE shall send LOCATION UPDATING REQUEST message with “MS network feature support”: 1 (MS supports the extended periodic timer in this domain)
At step 13, UE shall send LOCATION UPDATING REQUEST message wit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6 Location updating / interworking of attach and periodic | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6.2 Conformance requirement | 1) If the UE is in service state NO CELL AVAILABLE, LIMITED SERVICE, PLMN SEARCH or PLMN SEARCH-NORMAL SERVICE when the timer T3212 expires the location updating procedure is delayed until this service state is left.
2) The T3212 time-out value shall not be changed in the NO CELL AVAILABLE, LIMITED SERVICE, PLMN SEARCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6.3 Test purpose | 1) To check that if the PLU timer expires while the UE is out of coverage, the UE informs the network of its return to coverage.
2) To check that the PLU timer is not disturbed by cells of forbidden PLMNs.
3) To check that if the PLU timer does not expire while out of coverage and if the mobile returns to the LA where ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6.4 Method of test | Initial conditions
- System Simulator:
- two cells, a and b, of different PLMNs;
- T3212 is set to 12 minutes on cell a;
- T3212 is set to 6 minutes on cell b;
- IMSI attach is allowed in both cells.
NB: i) Cell b will be mapped to Cell 4 as found in TS 34.108 clause 6.1.4.1.
- User Equipment:
- the UE is deactivated. ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.6.5 Test requirement | 1) At step 20 the UE shall send an RRC CONNECTION REQUEST and at step 23 the UE shall attempt to perform a location update.
2) At step 11 the UE shall send an RRC CONNECTION REQUEST and at step 14 the UE shall attempt to perform a location update.
3) At step 27 the UE shall not initiate an RRC connection during 12minut... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7 Location Updating / accept with replacement or deletion of Equivalent PLMN list | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7.1 Definition | Test to verify that the UE replaces or deletes its stored Equivalent PLMN list when no Equivalent PLMN list is included in the LOCATION UPDATING ACCEPT message from the network during a Location Update. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7.2 Conformance requirement | 1) The stored list in the mobile station shall be replaced on each occurrence of the LOCATION UPDATING ACCEPT message.
2) If no equivalent PLMN list is contained in the LOCATION UPDATING ACCEPT message, then the stored equivalent PLMN list in the mobile station shall be deleted.
References
TS 24.008 4.4.4.6 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7.3 Test purpose | 1) To verify that the UE replaces its stored equivalent PLMN list if the equivalent PLMN list is contained in the LOCATION UPDATING ACCEPT message received from the network during a location updating procedure.
2) To verify that the UE deletes its stored equivalent PLMN list if no equivalent PLMN list is contained in t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7.4 Method of test | Initial conditions:
- System Simulator:
- two cells: A and B, with different PLMN Codes (PLMN 1 and PLMN 2 respectively);
- Qqualmin values for cells A and B are -16 dB (FDD only)
NB: i) Cell B will be mapped to Cell 4 as found in TS 34.108 clause 6.1.4.1.
- User Equipment:
- the UE is switched off. The HPLMN is PLMN 3... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.7.5 Test requirements | 1) At step 14 the UE shall perform a normal location updating in Cell B.
2) At step 27 the UE shall not perform a normal location updating in Cell B. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.8 Location Updating after UE power off | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.8.1 Definition | Test to verify that the UE stores the equivalent PLMN list at UE power off and uses the stored equivalent PLMN list after UE switch on.
9.4.8.2 Conformance requirement
The equivalent PLMN list shall be stored in the mobile station while switched off so that it can be used for PLMN selection after switch on.
References... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.8.3 Test purpose | To verify that the UE stores the equivalent PLMN list at UE switch off and uses the stored equivalent PLMN list after UE switch on. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.8.4 Method of test | Initial conditions
- System Simulator:
- three cells: A, B and C. Cell A belongs to PLMN1 which is HPLMN. Cell B belongs to PLMN2. Cell C belongs to PLMN3. The PLMNs are defined as follows:
Cell
MCC
MNC
PLMN
A
001
01
PLMN1
B
022
002
PLMN2
C
001
03
PLMN3
NB: i) Cell B will be mapped to Cell 4 as found in TS 34.108 claus... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.8.5 Test requirements | At step 16 the UE shall perform a normal location updating in Cell B.
9.4.9 Location Updating / Accept, Interaction between Equivalent PLMNs and Forbidden PLMNs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.9.1 Definition | Test to verify that, before storing the 'equivalent PLMN list' received from the network during a Location Update, the UE removes any PLMN already included in the 'forbidden PLMN list'. Consequently the UE shall not select a PLMN Equivalent to the registered PLMN if it is included in the 'forbidden PLMN list' in the US... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.9.2 Conformance requirement | The mobile station shall store the equivalent PLMNs list, as provided by the network, except that any PLMN code that is already in the "forbidden PLMN list" shall be removed from the "equivalent PLMNs" list before it is stored by the mobile station.
References
TS 24.008, 4.4.4.6 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.9.3 Test purpose | To verify that the UE shall not select a forbidden PLMN even though it is included in the equivalent PLMN list provided by the network because forbidden PLMNs shall not be stored in the mobile's equivalent PLMN list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.9.4 Method of test | Initial conditions
- System Simulator:
- two cells: A, and B. Cell A belongs to PLMN1. Cell B belongs to PLMN2.
NB: i) Cell B will be mapped to Cell 4 as found in TS 34.108 clause 6.1.4.1.
- User Equipment:
- the UE is switched off;
- the UE is in automatic PLMN selection mode.
- the UE is equipped with a USIM containi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.9.5 Test requirements | At step 11 the UE shall not perform a normal location updating in Cell B. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10 NITZ / MM/ Time zone, Time and DST Handling | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10.1 Definition | To check that the UE correctly handles time zone, time and DST. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10.2 Conformance requirement | The feature Network Identities and Timezone shall make it possible for a serving PLMN to transfer its current identity, universal time, DST and LTZ to MSs, and for the MS to store and use this information. Each one of these elements is optional. The feature significantly enhances roaming as it enables the accurate indi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10.3 Test purpose | To verify that a UE supporting any of the NITZ Time related feature (Local Time Zone, Universal Time and DST IE (and thus MM Information) is able to handle them properly. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10.4 Method of test | Related ICS/IXIT statements
Support of FDD Yes/No.
- Support of CS bearer service Yes/No
- Support of Switch on off button Yes/No.
- Support of NITZ DST Yes/No.
- Support of NITZ Universal Time for PLMN Yes/No.
- Support of NITZ Local Time Zone for PLMN Yes/No.
Initial conditions
System Simulator:
One cell (cell A) ope... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.10.5 Test requirements | In steps 10, 22, 34, 46 and 58 the UE populates the supported fields with the correct received values. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11 Location Updating / EAB active | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11.1 Definition | Test to verify that the UE does not perform LAU if the network broadcast EAB and EAB is enabled in the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11.2 Conformance requirement | - For generic location updating, GPRS attach and routing area updating procedures the mobile station shall evaluate the control information for:
- common access control (as specified in 3GPP TS 44.018 [84], 3GPP TS 44.060 [76], and 3GPP TS 25.331 [23c]);
- domain specific access control (as specified in 3GPP TS 44.018 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11.3 Test purpose | To verify that the UE does not perform LAU if the network broadcast EAB and EAB is enabled in the UE |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11.4 Method of test | Initial conditions:
- System Simulator:
- two cells, A and B, belonging to different location areas with location area identification a and b of the same PLMN;
- User Equipment:
- the UE has a valid TMSI (=TMSI1) and CKSN (=CKSN1). It is "idle updated" on cell A.
- An access class x (0-9) is arbitrarily chosen. The USI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.11.5 Test requirement | At step 3, The UE shall not initiate a location updating procedure as access class x is barred in EAB information.
At step 5, The UE shall transmit a RRC CONNECTION REQUEST message on cell B to initiate a location updating procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5 MM connection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.1 Introduction | [tbd] |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2 MM connection / establishment in security mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2.2 Conformance requirement | 1) The UE shall be able to correctly set up an MM connection in a Mobile Originating CM connection attempt and send a CM SERVICE REQUEST message with CKSN information element as stored in the USIM and Mobile Identity information element set to the TMSI.
2) The UE shall be able to interpret security mode setting as acce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2.3 Test purpose | To verify that the UE can correctly set up an MM connection in an origination and interpret security mode setting as acceptance of its CM service request. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2.4 Method of test | Initial conditions
- System Simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated".
Related ICS/IXIT statements
None.
Test Procedure
A mobile originating CM connection is initiated. After the UE has sent the CM SERVICE REQUEST message to the SS, an authentication proc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.2.5 Test requirement | At step 5 the UE shall send the CM SERVICE REQUEST message to the SS.
At step A10 or B10 or C10 the UE shall send a CM message and the SS shall release the RRC connection (step 14). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.3 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4 MM connection / establishment rejected | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4.2 Conformance requirement | If a CM SERVICE REJECT message is received by the mobile station, timer T3230 shall be stopped, the requesting CM sublayer entity informed. Then the mobile station shall proceed as follows:
- If the cause value is not #4 or #6 the MM sublayer returns to the previous state (the state where the request was received). Oth... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4.3 Test purpose | To verify that the UE stops timer T3230, informs the requesting CM sublayer entity and returns to the previous state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4.4 Method of test | Initial conditions
- System Simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated".
Related ICS/IXIT statements
None.
Test Procedure
A mobile originating CM connection is attempted. After the UE has sent the CM SERVICE REQUEST message to the SS, the SS responds with a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.4.5 Test requirement | The UE shall attempt MO CM connection (step 1).
At step 5 the UE shall send a CM SERVICE REQUEST.
After step 6 the UE shall not send a layer 3 message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5 MM connection / establishment rejected cause 4 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5.2 Conformance requirement | The CM SERVICE REQUEST message contains the:
- mobile identity according to clause 10.5.1.4;
- mobile station classmark 2;
- ciphering key sequence number; and
- CM service type identifying the requested type of transaction (e.g. mobile originating call establishment, emergency call establishment, short message service... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5.3 Test purpose | To verify that the UE can correctly set up an MM connection in a Mobile Originating CM connection attempt and send a CM SERVICE REQUEST message with CKSN information element as stored in the USIM and Mobile Identity information element set to TMSI.
To verify that the UE, when receiving a CM SERVICE REJECT message with ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5.4 Method of test | Initial conditions
- System Simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated".
Related ICS/IXIT statements
None.
Test Procedure
A mobile originating CM connection is attempted. After the UE has sent the CM SERVICE REQUEST message to the SS, the SS responds with a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.5.5 Test requirement | 1) The UE shall attempt MO CM connection (at step 1) and at step 5 the UE shall send a CM SERVICE REQUEST message with CKSN information element as stored in the USIM and Mobile Identity information element set to the TMSI.
2) At step 6 the SS should send a CM SERVICE REJECT message with reject cause "IMSI unknown in VL... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.6 MM connection / expiry T3230 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.6.2 Conformance requirement | At T3230 expiry (i.e. no response is given but an RRC connection is available) the MM connection establishment shall be aborted.
References
TS 24.008 clauses 4.5.1.2 and 11.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.5.6.3 Test purpose | To verify that at T3230 expiry, the UE aborts the MM-connection establishment. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.