hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.5.7.3.3 Method of test | Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
- Support of speech (TSPC_AddInfo_Full_rate_version_1, TSPC_AddInfo_Half_rate_version_1)
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.5.8 Default contents of messages | Default requirements for messages that are not mentioned in this subclause are given in subclause 26.8.4.
CHANNEL RELEASE
Information element
Value/remark
RR cause
Normal event
CHANNEL REQUEST
DISCONNECT (SS -> MS)
Information element
Value/remark
Cause
Coding standard
Standard defined for the GSM PLMNS
Location
user
C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6 Test of the elementary procedures for radio resource management | NOTE: For SS implementor: if tests are concatenated, it is important that unused fields in IMMEDIATE ASSIGNMENT REJECT messages do not use Request References that relate to CHANNEL REQUEST messages recently transmitted by the MS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1 Immediate assignment | The immediate assignment procedure is used by the network to establish a dedicated control channel for the MS and network to communicate the detail of the service requested. If the Mobile Station does not implement the procedure correctly, radio resources can be wasted as the Mobile Station might use the wrong channels... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.1 Immediate assignment / SDCCH or TCH assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.1.1 Conformance requirement | 1. Following a PAGING REQUEST message, the MS shall correctly set up an RR connection on the SDCCH/8 described in the IMMEDIATE ASSIGNMENT message.
2. Following a PAGING REQUEST message, the MS shall correctly set up an RR connection on the TCH/FACCH described in the IMMEDIATE ASSIGNMENT message.
Reference(s)
3GPP TS 0... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.1.2 Test purpose | To verify that the MS can correctly set up a dedicated SDCCH control channel and that the MS can correctly set up a dedicated TCH/FACCH control channel. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, except that CCCH_CONF is set to "1 basic physical channel used for CCCH not combined with SDCCHs".
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports SDCCH only (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.2 Immediate assignment / extended assignment | NOTE 2: In these tests the SS must send the immediate assignment messages in due time to allow for the MS to receive them and send a PAGING RESPONSE rather than another random access. This applies to the whole of clause 26. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.2.1 Conformance requirements | 1. The MS shall go to the allocated SDCCH/4 and send a PAGING RESPONSE message containing its identity and its classmark.
2. The MS shall go to the allocated SDCCH/8 and send a PAGING RESPONSE message containing its identity and its classmark.
3. The MS shall correctly identify its own assignment in either the Request ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.2.2 Test purpose | To verify that the MS goes to the allocated SDCCH/4 and sends a PAGING RESPONSE message containing its identity and its classmark.
To verify that the MS goes to the allocated SDCCH/8 and sends a PAGING RESPONSE message containing its identity and its classmark.
To verify that the MS can correctly identify its own assig... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-retrans is set to 7.
Mobile Station:
The MS is in the "idle, updated" state. with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with a TMSI allocated.
Test Procedure
In the first part of the test, the SS p... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.3 Immediate assignment / assignment rejection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.3.1 Conformance requirements | 1. The MS shall respond to the Paging Request message by sending a Channel Request message with establishment cause set to "Answer to Paging". After the reception of IMMEDIATE ASSIGNMENT REJECT, the MS shall not transmit during the time indicated in the "Wait Indication" field of the IMMEDIATE ASSIGNMENT REJECT message... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.3.2 Test purpose | To verify that the MS can accept an IMMEDIATE ASSIGNMENT REJECT.
To verify that the MS can respond to paging after an IMMEDIATE ASSIGNMENT REJECT is received on a different cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.3.3 Method of test | Initial Conditions
System Simulator:
2 cells with the same LAI, Max-Retrans is 7.
Mobile Station:
The MS is camped on cell A and is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
The MS is camped on cell B and is in the "idle, updated" s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.4 Immediate assignment / ignore assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.4.1 Conformance requirements | 1. An MS waiting for a response from the network, following the sending of a CHANNEL REQUEST, shall ignore an IMMEDIATE ASSIGNMENT message with a request reference containing a wrong frame number.
2. An MS is waiting for an assignment of its own, shall ignore an IMMEDIATE ASSIGNMENT message with a request reference con... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.4.2 Test purpose | To verify that the MS ignores an assignment for another MS while it is waiting for an assignment of its own. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.4.3 Method of test | Initial Conditions
System Simulator:
1 cell.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS, which reacts with CHANNEL REQUESTs. The SS re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.5 Immediate assignment after immediate assignment reject | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.5.1 Conformance requirement | Following an IMMEDIATE ASSIGNMENT REJECT message, the MS shall listen for IMMEDIATE ASSIGNMENTS until T3126 expires.
Reference
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.1.1.3 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.5.2 Test purpose | To verify that the MS correctly responds to an IMMEDIATE ASSIGNMENT message sent after an IMMEDIATE ASSIGNMENT REJECT message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.5.3 Method of test | Initial conditions
System Simulator:
1 cell;
CCCH_CONF is set to "1 basic physical channel used for CCCH not combined with SDCCHs";
Max retrans is set to 7;
TX-integer is set to 7;
Mobile Station:
The MS is in "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen final sta... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.6 Immediate assignment / implicit rejection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.6.1 Conformance requirement | The network may at any time include an implicit reject indication for the PS domain or the CS domain within an IMMEDIATE ASSIGNMENT message using the IA Rest Octets IE (see sub-clause 10.5.2.16) or within an IMMEDIATE ASSIGNMENT REJECT or an IMMEDIATE ASSIGNMENT EXTENDED message using the Feature Indicator IE (see sub-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.6.2 Test purpose | To verify that the MS, if configured for LAP, activates the implicit reject timer when it reads a CCCH block that indicates that implicit reject condition is indicated.
To verify that the MS does not make any access attempt when the implicit reject timer is active
To verify that the MS, if configured for LAP, when wait... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.6.3 Method of test | Initial conditions
System Simulator:
1 cell;
Mobile Station:
The MS is switched off.
The MS is configured for “low access priority” and “Extended Access Barring”
Max retrans is set to 7
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"idle, updated", with TMSI allocated.
Test Procedure
The ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.1.7 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2 Test of paging | The Paging procedure is used by the network to cause the Mobile Station to establish a radio connection. Normally the Mobile Station listens to its paging subchannel, but this can be modified by the use of different page modes. The correct implementation of the paging procedure in the Mobile Station is essential for th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1 Normal paging | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.1 Paging / normal / type 1 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.1.1 Conformance requirements | 1. The MS shall respond correctly to various PAGING REQUEST TYPE 1 messages, when the page mode is set to normal paging, in the following cases:
1.1 The MS is addressed with its IMSI in the first Mobile Identity field. The optional Mobile Identity field is not present.
1.2. The MS is addressed with its TMSI in the firs... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.1.2 Test purpose | To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 1 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested. It is tested that the MS responds with the same type of identity tha... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.2 Paging / normal / type 2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.2.1 Conformance requirements | 1. The MS shall respond correctly (by sending CHANNEL REQUEST messages with an Establishment Cause set to "Answer to Paging") to various PAGING REQUEST TYPE 2 messages, when the page mode is set to normal paging, in the following cases:
1.1 The MS is addressed in the first TMSI field.
1.2 The MS is addressed in the sec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.2.2 Test purpose | To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 2 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested. It is tested that the MS responds with the same type of identity tha... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.3 Paging / normal / type 3 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.3.1 Conformance requirements | An MS shall respond correctly to various PAGING REQUEST TYPE 3 messages, when the page mode is set to normal paging. The MS shall send CHANNEL REQUEST messages, with an Establishment Cause set to "Answer to Paging", until the network answers. The number of CHANNEL REQUEST messages shall be limited by the parameter Max-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.3.2 Test purpose | To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 3 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.2 Paging / extended | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.2.1 Conformance requirements | 1. The MS shall operate in the extended page mode when this is ordered by the network in a PAGING REQUEST TYPE 1 message not addressing the MS but on the paging subchannel which corresponds to the MS's identity.
2. The MS shall operate in the extended page mode when this is ordered by the network in a PAGING REQUEST TY... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.2.2 Test purpose | To test that the MS is operating in the extended page mode when this is ordered by the SS in either a PAGING REQUEST message or an IMMEDIATE ASSIGNMENT message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3 Paging / reorganization | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.1 Paging / reorganization / procedure 1 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.1.1 Conformance requirements | 1. An MS, after reception of a message with page mode set to "paging reorganization", shall answer to paging messages (with page mode set to "normal paging") sent on its old CCCH in paging blocks which do not belong to the MS's paging sub-channel.
2. When the network changes the paging group of the MS by modifying BCCH... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.1.2 Test purpose | To test that the MS correctly determines its new paging subchannel when the CCCH structure is changed from non-combined to combined and when the number of CCCHs is changed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, CCCH_CONF set to "1 basic physical channel used for CCCH, not combined with SDCCHs", a legal combination of BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS, with the exception that BS_PA_MFRMS shall not be set to 9.
Mobile Station:
The MS is i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.2 Paging / reorganization / procedure 2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.2.1 Conformance requirement | An MS, after reception of a message with page mode set to "paging reorganization", shall answer to paging messages (with page mode set to "normal paging") sent in a former Access Grant block.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.2.2 Test purpose | To test that the MS is operating in the "paging reorganization" page mode when this is ordered by the SS and the MS is paged in its former access grant channel. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.3.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 1, with the constraint that BS_AG_BLKS_RES > 0, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated. The IMSI of the MS is from a defined... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.4 Paging / same as before | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.4.1 Conformance requirements | An MS, after first receiving a message on its paging subchannel with page mode set to "extended paging" and then the next message on its paging subchannel with page mode set to "same as before", shall remember the page mode from the previous message and answer to paging messages in the next but one paging sub block.
Re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.4.2 Test purpose | To test that the MS remembers the page mode from the previous paging request message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.5 Paging / multislot CCCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.5.1 Conformance requirements | The MS shall respond correctly to a PAGING REQUEST TYPE 1 message, when the page mode is set to normal paging, when a multislot CCCH is used and the MS is addressed with its IMSI in the first Mobile Identity field, the optional Mobile Identity field being not present.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclaus... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.5.2 Test purpose | 1) To test that the MS is able to determine its CCCH group and paging group correctly in the case of a CCCH configuration on more than one timeslot when it is paged on a timeslot other than 0. The MS is addressed with a PAGING REQUEST TYPE 1 message when the page mode is set to normal paging. The MS is paged with its I... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily under the following constraint:
CCCH_CONF is in the set:
- 2 basic physical channels used for CCCH, not combined with SDCCHs
- 3 basic physical channels used for CCCH, not combined with SD... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.6 Paging / EAB active | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.6.1 Conformance requirements | Upon receipt of a paging request message, or other message containing information to trigger the establishment of a RR connection, and if access to the network is allowed, the addressed mobile station shall, when camped on a cell as specified in 3GPP TS 23.022, initiate the immediate assignment procedure as specified i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.6.2 Test purpose | To verify that the MS, configured for Extended Access class Barring, responds to paging messages when EAB is being broadcast by the network. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.2.6.3 Method of test | Initial Conditions
System Simulator:
The SYSTEM INFORMATION TYPE 21 is sent on the BCCH. The SI 21 Rest Octets information element is configured with: EAB Authorization Mask set to”xxxxxxxxx1” and EAB Subcategory set to “00”.
Mobile Station:
The MS is switched off.
The MS is configured for “Extended Access Barring” and... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3 Test of measurement report | When an RR-connection exists, the MS shall send measurement reports. These reports contain reception characteristics from serving and neighbouring cells. The measurement report procedure is described in subclause 3.4.1.2 of 3GPP TS 04.08 / 3GPP TS 44.018.
NOTE 8: The capability to calculate RxLev and RxQual is tested i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.1 Measurement / no neighbours | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.1.1 Conformance requirements | The MS shall continuously send MEASUREMENT REPORT messages on every SACCH block and the measurement valid indication shall be set to valid (0) within the second block at the latest.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.4.1.2, 3GPP TS 05.08 subclause 8.4. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.1.2 Test purpose | To test that, when the SS gives absolutely no information about neighbouring cells, the MS does not report on neighbouring cells. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.1.3 Method of test | Initial Conditions
System Simulator:
8 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
N7
Level
-60
-85
-80
-75
-55
-50
-45
-40
Ncc
1
1
1
1
1
1
1
1
Bcc
3
5
7
1
3
5
7
1
ARFCN
GSM 450
260
264
268
272
276
280
284
288
GSM 480
307
311
315
319
323
327
331
335
GSM 710
439
445
451
457
463
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.2 Measurement / all neighbours present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.2.1 Conformance requirements | The MS shall continuously send MEASUREMENT REPORT messages on every SACCH blocks and the measurement valid indication shall be set to valid (0) within the second block at the latest. The MEASUREMENT REPORT message shall contain measurement results for the 6 strongest BCCH carriers with known and allowed NCC part of BSI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.2.2 Test purpose | To test that, when the SS gives information about neighbouring cells, the MS reports appropriate results. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.2.3 Method of test | Initial Conditions
System Simulator:
8 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
N7
Level
-60
-85
-80
-75
-55
-50
-45
-40
Ncc
1
1
1
1
1
1
1
1
Bcc
3
5
7
1
3
5
7
1
ARFCN
GSM 450
260
264
268
272
276
280
284
288
GSM 480
307
311
315
319
323
327
331
335
GSM 710
439
445
451
457
463
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.3 Measurement / barred cells and non-permitted NCCs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.3.1 Conformance requirements | The MS shall continuously send MEASUREMENT REPORTs on every SACCH blocks and the measurement valid indication shall be set to valid (0) within the second block at the latest. After 20 s the messages shall contain measurement results only for the 4 BCCH carriers on which the MS is allowed to report.
References
3GPP TS 0... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.3.2 Test purpose | To test that, when a combination of normal neighbours, barred cells and non-permitted NCCs is "on air", the MS reports only on normal neighbours. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.3.3 Method of test | Initial Conditions
System Simulator:
8 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
N7
Level dBm
-60
-85
-80
-75
-55
-50
-45
-40
NCC
1
1
1
2
3
4
1
1
BCC
3
5
7
1
3
5
7
1
Cell Identity
0001H
0002H
0003H
0004H
0005H
0006H
0007H
0008H
ARFCN
GSM 450
260
264
268
272
276
280
284
288
GS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.4 Measurement / DTX | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.4.1 Conformance requirements | After the sending of the HANDOVER COMPLETE, the MS shall continuously send measurement reports in every SACCH blocks, the measurement valid indication shall be set to valid (0) within the second block at the latest. After 20 s the order of values in the MEASUREMENT REPORT message shall contain measurement results for t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.4.2 Test purpose | To test that, in the case of the MS using DTX and the SS indicating that power control is in use, the MS reports appropriate results. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.4.3 Method of test | Initial Conditions
System Simulator:
8 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
N7
Level dBm
-60
-85
-80
-75
-55
-50
-45
-40
NCC
1
1
1
1
1
1
1
1
BCC
3
5
7
1
3
5
7
1
Cell Identity
0001H
0002H
0003H
0004H
0005H
0006H
0007H
0008H
ARFCN
GSM 450
260
264
268
272
276
280
284
288
GS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.5 Measurement / Frequency Formats | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.5.1 Conformance Requirement | The MS shall continuously send MEASUREMENT REPORT messages on every SACCH blocks and the measurement valid indication shall be set to valid (0) within the second block at the latest. After 20 s the values in the MEASUREMENT REPORT message shall contain measurement results for the cells on which the mobile is allowed to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.5.2 Test Purpose | To test that, when the SS gives information about neighbouring cells, the MS reports appropriate results. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.5.3 Method of test | Initial Conditions
System Simulator:
2 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
Level
-60
-85
Ncc
1
1
Bcc
3
5
ARFCN
GSM 450
260
264
GSM 480
307
311
GSM 710
439
445
GSM 750
439
445
T-GSM 810
439
445
GSM 850
129
135
GSM 900
002
008
DCS 1 800
715
805
PCS 1 900
715
805
Cell Identity
0001H
0002... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.6 Measurement / multiband environment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.6.1 Conformance requirements | The MS shall continuously send MEASUREMENT REPORT messages on every SACCH blocks and the measurement valid indication shall be set to valid (0) within the second block at the latest. The MEASUREMENT REPORT message shall contain measurement results for up to the 6 strongest BCCH carriers among those with known and allow... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.6.2 Test purpose | To test that, when the SS gives information about neighbouring cells using SYSTEM INFORMATION TYPE 2ter/5ter, the MS reports appropriate results. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.6.3 Method of test | Initial Conditions
System Simulator:
8 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
N7
Level
-60
-85
-80
-75
-55
-50
-45
-40
Ncc
1
1
1
1
1
1
1
1
Bcc
3
5
7
1
3
5
7
1
ARFCN
GSM 450
260
264
268
272
276
280
284
288
GSM 480
307
311
315
319
323
327
331
335
GSM 710
439
445
451
457
463
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.7 Measurement / new cell reporting | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.7.1 Conformance requirements | The MS shall continuously send MEASUREMENT REPORT messages on every SACCH blocks and the measurement valid indication shall be set to valid (0) within the second block at the latest. The MS shall report a new strongest cell in the measurement report at the latest 5 s after a new strongest cell (which is part of the BA(... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.7.2 Test purpose | To test that, when the SS activates a new strongest neighbour cell, the MS reports that cell with a maximum delay of 5 s. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.7.3 Method of test | Initial Conditions
System Simulator:
7 cells with the following settings:
Transmitter
Serving
Neighbour
S1
N1
N2
N3
N4
N5
N6
Level
-70
-75
-75
-75
-75
-75
-75
NCC
1
1
1
1
1
1
1
BCC
3
5
7
1
3
5
7
ARFCN
GSM 450
260
264
268
272
276
280
284
GSM 480
307
311
315
319
323
327
331
GSM 710
439
445
451
457
463
469
475
GSM 750
439... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.8 Enhanced Measurement /all neighbours present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.8.1 Conformance requirements | When in dedicated mode or group transmit mode, the mobile station regularly sends either MEASUREMENT REPORT or ENHANCED MEASUREMENT REPORT messages to the network.
The Mobile Station shall use ENHANCED MEASUREMENT REPORT messages instead of MEASUREMENT REPORT messages if that is indicated by the parameter REPORT_TYPE a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.3.8.2 Test purpose | To test that, when the SS gives information about neighbouring cells, the MS reports appropriate results. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.