hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.2.2 Test purpose | To test the behaviour of the MS if the network rejects the authentication and ciphering procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.2.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.3 Authentication accepted with USIM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2 Test of ciphering mode setting | The purpose of this procedure is to let the network to trigger the start and stop of stream ciphering.
The SS shall start and synchronise ciphering and deciphering according to 3GPP TS 03.20 / 3GPP TS 33.102, 3GPP TS 33.220. The bitstream shall be generated according to the commanded algorithm GExA. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.1 Ciphering mode / start ciphering | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.1.1 Conformance requirements | 1. When the MS receives the AUTHENTICATION AND CIPHERING REQUEST message during the attach procedure, with Ciphering indicator information element set to 'ciphering mode off', the Mobile Station shall:
1.1. responds with an AUTHENTICATION AND CIPHERING RESPONSE message;
1.2. not start ciphering.
2. When the MS receives... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.1.2 Test purpose | To test the behaviour of the MS if the network accepts the authentication and ciphering procedure with ciphering. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.1.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
For parameter K = 4 (GEA4) Test USIM has to be plugged into the MS
The MS has a valid IMSI. MS is Idle Updat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.2 Ciphering mode / stop ciphering | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.2.1 Conformance requirements | 1. When the MS receives the AUTHENTICATION AND CIPHERING REQUEST message during the attach procedure, with Ciphering indicator information element set to 'ciphering mode on', the Mobile Station shall:
1.1. responds with an AUTHENTICATION AND CIPHERING RESPONSE message;
1.2. start ciphering and deciphering with the algo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.2.2 Test purpose | To test the behaviour of the MS if the network accepts the authentication and ciphering procedure without ciphering. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.2.2 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.3 Ciphering mode / IMEISV request | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.3.1 Conformance requirements | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 1 When the MS receives the AUTHENTICATION AND CIPHERING REQUEST message during the attach procedure, with Ciphering indicator information element set to 'ciphering mode on' and 'IMEISV requested', the Mobile Station shall: | 1.1 responds with an AUTHENTICATION AND CIPHERING RESPONSE message;
1.2 include IMEISV;
1.3 start ciphering and deciphering with the algorithm indicated by the Ciphering algorithm information element;
1.4 the ciphering uses the cipher key determined during the authentication procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 2 When the MS receives the AUTHENTICATION AND CIPHERING REQUEST message during the routing area updating procedure, with Ciphering indicator information element set to 'ciphering mode off' and 'IMEISV not requested', the Mobile Station shall: | 2.1 responds with an AUTHENTICATION AND CIPHERING RESPONSE message;
2.2 not include IMEISV;
2.3 not start ciphering.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.7. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.3.2 Test purpose | To test the behaviour of the MS with respect to return IMEISV on request only. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.3.3 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.4 Ciphering mode/Cipher key Kc128 and algorithm changes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.4.1 Conformance requirement | A Mobile Station shall correctly respond in an authentication and ciphering procedure by sending a response with the SRES information field set to the same value as the one produced by the authentication and ciphering algorithm in the network.
In a UMTS authentication challenge, if the AUTHENTICATION_AND_CIPHERING REQU... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.4.2 Test purpose | To verify that the MS uses correctly Kc and Kc128 when the GPRS Encryption Algorithm is changed from GEA3 to GEA4 and from GEA4 to GEA3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.4.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II, SGSN is R99
Mobile Station:
Test USIM is plugged into the MS. The MS has a valid IMSI. MS is Idle Updated on cell A.
Specifi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.5 Ciphering mode / Non support of GEA1 / Non support of GEA2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.5.1 Conformance requirement | It is mandatory for GEA3 and non encrypted mode (i.e. GEA0) to be implemented in mobile stations. GEA4 may be implemented in the mobile stations.
NOTE 1: Mobile stations are not allowed to implement GEA1 or GEA2 from Release 97 onwards.
Reference(s):
3GPP TS 43.020 Annex D.4.9 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.5.2 Test Purpose | To verify that MS does not apply GEA1 nor GEA2 ciphering algorithm. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.2.5.3 Method of Test | Initial Conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operation mode C (TSPC_operation_mode_C).
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPR... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.6 Identification procedure | The purpose of this procedure is to check that the MS gives its identity as requested by the network. If this procedure does not work, it will not be possible for the network to rely on the identity claimed by the MS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.6.1 General Identification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.6.1.1 Conformance requirement | 1) When requested by the network the Mobile Station shall send its IMSI.
2) When requested by the network the Mobile Station shall send its IMEI as stored in the Mobile Equipment.
3) When requested by the network the Mobile Station shall send its IMEISV as stored in the Mobile Equipment.
Reference(s):
3GPP TS 04.08 / 3... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.6.1.2 Test purpose | To verify that the MS sends identity information as requested by the system. The following identities can be requested: IMSI, IMEI and IMEISV. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.6.1.3 Method of test | Initial conditions
System Simulator:
One cell operating in network mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operation mode C (TSPC_operation_mode_C).
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPRS att... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7 GMM READY timer handling | The READY timer, T3314 is used in the MS and in the network per each assigned P-TMSI to control the cell updating and paging procedure.
When the READY timer is running the MS shall perform cell update each time a new cell is selected (see 3GPP TS 03.22 [3]). If a routing area border is crossed a routing area updating p... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.1 Conformance requirement | 1) When the READY timer is running the MS shall perform cell update each time a new cell is selected.
2) The READY timer shall be restarted in the MS when the GMM entity receives an indication from lower layers that user data or GMM or SM signalling messages have been transmitted.
3) The READY timer shall be stopped wh... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.2 Test Purpose | To verify the functionality of the READY timer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3.1 Test procedure 1 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3.2 Test procedure 2 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C (TSP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3.3 Test procedure 3 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3.4 Test procedure 4 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C (TSP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.7.3.5 Test procedure 5 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI.. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8 DTM mobility management | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1 Change of cell between two LAs in idle mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.1 Change of cell between two LAs in idle mode / RAU completes first | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.1.1 Conformance requirements | RA update and LA update procedures shall be supported in parallel in the main DCCH with SAPI 0. This helps reduce the congestion caused by GPRS signalling on GPRS TCHs that naturally exists in cells on the border of a RA or RA/LA without noticeably affecting the QoS of the CS connection.
In network mode of operation II... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.1.2 Test purpose | To verify that both Location Updating and Routeing Area Updating procedures are completed in parallel and also to guarantee that the GPRS mobile obeys a command to use the SDCCH for signalling. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.1.3 Method of test | Initial Conditions
System Simulator:
2 cells, A and B with different LAIs, both operating in network operation mode II and both support DTM.
Mobile Station:
The MS is in packet idle mode with a TMSI and P-TMSI allocated.
Specific PICS statements:
-
PIXIT statements:
-
Test Procedure
Once the MS is camped on cell A in t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.2 Change of cell between two LAs in idle mode / LAU completes first / SS releases channel | 44.2.8.1.2.1 Conformance requirements
RA update and LA update procedures shall be supported in parallel in the main DCCH with SAPI 0. This helps reduce the congestion caused by GPRS signalling on GPRS TCHs that naturally exists in cells on the border of a RA or RA/LA without noticeably affecting the QoS of the CS conne... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.2.2 Test purpose | To verify that:
• both Location Updating and Routing Area Updating procedures are completed in parallel.
• the MS can complete the Routing Area Updating procedure on TBFs when the channel is removed.
• the GPRS mobile obeys a command to use a TCH/F for signalling. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.2.3 Method of test | Initial Conditions
System Simulator:
2 cells, A and B with different LAIs, both operating in network operation mode II and both support DTM.
Mobile Station:
The MS is in "idle" state with a TMSI and P-TMSI allocated.
Specific PICS statements:
-
PIXIT statements:
-
Test Procedure
Once the MS is camped on cell A in the f... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.3 Change of cell between two LAs in idle mode / LAU completes first / SS maintains channel | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.3.1 Conformance requirements | RA update and LA update procedures shall be supported in parallel in the main DCCH with SAPI 0. This helps reduce the congestion caused by GPRS signalling on GPRS TCHs that naturally exists in cells on the border of a RA or RA/LA without noticeably affecting the QoS of the CS connection.
In network mode of operation II... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.3.2 Test purpose | To guarantee that the MS can complete the Routing Area Updating procedure on the main DCCH, if the network maintains the CS connection after the Location Updating procedure is completed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.8.1.3.3 Method of test | Initial Conditions
System Simulator:
2 cells, A and B with different LAIs, both operating in network operation mode II and both support DTM.
Mobile Station:
The MS is in "idle" state with a TMSI and P-TMSI allocated.
Specific PICS statements:
-
PIXIT statements:
-
Test Procedure
Once the MS is camped on cell A in the f... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9 Network Identity and Timezone (NITZ) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1 NITZ and GPRS procedures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.1 NITZ / GPRS / Timezone, Time and DST Handling | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.1.1 Conformance requirement | The feature Network Identities and Timezone shall make it possible for a serving PLMN to transfer its current identity, universal time, DST and LTZ to MSs, and for the MS to store and use this information. Each one of these elements is optional. The feature significantly enhances roaming as it enables the accurate indi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.1.2 Test purpose | To verify that a MS supporting any of the NITZ Time related feature (Local Time Zone, Universal Time and DST IE (and thus GMM Information) is able to handle them properly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.1.3 Method of test | Initial conditions
System Simulator:
Two cells operating in network operation mode I, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPRS attach pro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.2 NITZ / GPRS / NITZ Parameters / Storage / Deletion | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.2.1 Conformance requirement | The feature Network Identities and Timezone shall make it possible for a serving PLMN to transfer its current identity, universal time, DST and LTZ to MSs, and for the MS to store and use this information. Each one of these elements is optional. The feature significantly enhances roaming as it enables the accurate indi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.2.2 Test purpose | To verify that a MS supporting any of the NITZ Name related feature (Short or Full PLMN name and thus GMM Information) is able to handle the names properly and does not erase the PLMN name sent using NITZ procedure at switch off. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.2.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPRS attach procedure at switch on or power on (TSPC_AddInfo_on_auto_GPRS_AP).
- Use of NITZ ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.3 NITZ / GPRS / MM and GMM Signalling | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.3.1 Conformance requirement | The feature Network Identities and Timezone shall make it possible for a serving PLMN to transfer its current identity, universal time, DST and LTZ to MSs, and for the MS to store and use this information. Each one of these elements is optional. The feature significantly enhances roaming as it enables the accurate indi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.3.2 Test purpose | To verify that a MS supporting NITZ (any of the Fields) is able to handle both MM INFORMATION and GMM INFORMATION messages and that parameters set in the latest message override the previous ones. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.9.1.3.3 Method of test | Initial conditions
System Simulator:
Two cells operating in network operation mode I (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- Switch off on button (TSPC_Feat_OnOf... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10 MS Radio Access Capability Interrogation | This procedure allows the network to request the MS to supply its radio access capability information to the network. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10.1 Conformance requirements | In state GMM-DEREGISTERED, the MS initiates the GPRS attach procedure by sending an ATTACH REQUEST message to the network, starts timer T3310 and enters state GMM-REGISTERED-INITIATED.
The ATTACH REQUEST message contains the MS Radio Access capability information element.
The purpose of the MS RA capability information... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10.2 Test purpose | To verify that the MS supplies all its radio access capabilities and Network MS Capabilities, when attaching to the network for GPRS services. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10.3.1 Initial Conditions | System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPRS attach procedure at switch on or power on (TSPC_AddInfo_on_auto_GPRS_AP).
PIXIT statements:
- Contents of M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.10.3.2 Test procedure | The MS sends an ATTACH REQUEST message with identity IMSI. The SS allocates a P-TMSI and returns ATTACH ACCEPT message with a P-TMSI. The MS acknowledge the P-TMSI by sending ATTACH COMPLETE message.
Expected sequence
Step
Direction
Message
Comments
1
MS
The MS is powered up or switched on and initiates an attach proce... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11 Cell Notification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11.1 Conformance Requirement | When the READY timer is running or has been deactivated the MS shall perform cell update each time a new cell is selected.
When the READY timer has expired the MS shall:
- perform the routing area updating procedure when a routing area border is crossed;
- not perform a cell update when a new cell is selected.
The READ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11.2 Test Purpose | Test purpose 1
The MS shall start to use the LLC NULL frame to perform cell updates following receipt of an ATTACH ACCEPT message containing the Cell Notification information element.
Test purpose 2
The MS shall start to use the LLC NULL frame to perform cell updates following receipt of a ROUTING AREA UPDATE ACCEPT me... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11.3 Method of Test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11.3.1 Test Procedure 1 – Ready Timer Behaviour | Initial Conditions
System Simulator:
Two cells (not simultaneously activated), Cell A in MCC1/MNC1/LAC1/RAC1, Cell B in MCC1/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is switched off.
Specific PICS statements:
- MS operation mode B (TSPC_operation... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.11.3.2 Test Procedure 2 – Use of LLC NULL Frame | Initial Conditions
System Simulator:
Three cells (not simultaneously activated), Cell A in MCC1/MNC1/LAC1/RAC1, Cell B in MCC1/MNC1/LAC1/RAC2 and Cell C in MCC1/MNC1/LAC1/RAC2.
All cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI and P-TMSI-1 stored. MS is switched off.
Specific... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.1 Definition | Test cases identified in TS 51.010-2 as “EC-GSM –IoT compatible” should consider the default cells in the “Initial Conditions” to be EC-GSM-IoT cells if the test has to be executed in “EC Mode. Otherwise the cell should be considered as a basic GPRS cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2 PDP context activation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1 Initiated by the mobile station | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.1 Attach initiated by context activation/QoS Offered by Network is the QoS Requested | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.1.1 Conformance requirement | PDP context activation shall initiate GPRS Attach by the MS when the MS is GPRS Detached.
In order to request a PDP context activation, the MS sends an ACTIVATE PDP CONTEXT REQUEST message to the network. If the QoS offered by the network is the same as the QoS requested by the mobile, then upon receipt of the message ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.1.2 Test purpose | To check the MS initiates a GPRS ATTACH if one is not already active. To test the behaviour of the MS when the network responds to a PDP context activation request with the requested QoS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.1.3 Method of test | Specific PICS statements:
- GPRS Auto Attach (TSPC_AddInfo_on_auto_GPRS_AP)
PIXIT statements:
-Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in GMM-state "GMM-DEREGISTERED, normal service" with valid P-TMSI and CKSN.
Test procedure
If the MS is attached, it should be trigger... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2 QoS Offered by Network is a lower QoS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.1 QoS Accepted by MS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.1.1 Conformance requirement | In order to request a PDP context activation, the MS sends an ACTIVATE PDP CONTEXT REQUEST message to the network. If the QoS offered by the network is acceptable to mobile, then upon receipt of the message ACTIVATE PDP CONTEXT ACCEPT the MS shall initiate establishment of the logical link with the offered QoS.
Referen... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.1.2 Test purpose | To test the behaviour of the MS when the network responds to a PDP context activation request with a lower QoS than that requested. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.1.3 Method of test | Specific PICS statements:
-
PIXIT statements:
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
Test procedure
The requested QoS and Minimum QoS are set. A context activation is requested by the user. On... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.2 QoS Rejected by MS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.2.1 Conformance requirement | In order to request a PDP context activation, the MS sends an ACTIVATE PDP CONTEXT REQUEST message to the network.
Upon receipt of the message ACTIVATE PDP CONTEXT ACCEPT offering a QoS which is not acceptable to the mobile, the MS shall initiate the PDP context deactivation procedure.
Reference
3GPP TS 04.08 / 3GPP TS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.2.2 Test purpose | To test the behaviour of the MS when the QoS offered by the network in response to a PDP context activation request is not acceptable to the MS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.1.2.2.3 Method of test | Specific PICS statements:
-
PIXIT statements:
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
Test procedure
The requested QoS and Minimum QoS are set. A context activation is requested by the user. On... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.2 PDP context activation requested by the network, successful and unsuccessful | Applicability
This test needs to take into account the number of contexts supported by the MS to be able to test the response when all contexts are activated and the network tries to initiate a new context. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.2.1 Conformance requirement | 1) Upon receipt of a REQUEST PDP CONTEXT ACTIVATION message:
- If the MS accepts the request the MS shall then initiate the PDP context activation procedure.
- If the MS rejects the request, the MS shall send a REQUEST PDP CONTEXT ACTIVATION REJECT message with one of the following causes:
- #26: insufficient resource... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.2.2 Test purpose | To test the behaviour of the MS upon receipt of a context activation request from the network. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.2.3 Method of test | Specific PICS statements:
-
PIXIT statements:
- Number of network initiated PDP contexts supported
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
Case 1
For an MS that supports PDP Context Activation re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 45.2.3 Void |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.