hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.8.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.8.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 and cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C (T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.9 Routing area updating / abnormal cases / Network reject with Extended Wait Timer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.9.1 Conformance requirement | #22 (Congestion);
If the T3346 value IE is present in the ROUTING AREA UPDATE REJECT message and the value indicates that this timer is neither zero nor deactivated, the MS shall proceed as described below, otherwise it shall be considered as an abnormal case and the behaviour of the MS for this case is specified in su... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.9.2 Test purpose | 1. To verify that the LAP indicator can be set in the UE
2. To verify that the Delay Tolerant indicator is sent by the UE
3. To verify that the UE uses the back-off timer if the network reject a request with the Extended Wait Timer |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.9.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A.
The MS is configured for “low access pr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.10 Routing area updating / eDRX | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.10.1 Conformance requirement | 1) If the MS supports eDRX and requests the use of eDRX, the MS shall include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
2) The MS shall use the extended idle mode DRX cycle only if the network has provided the extended DRX parameters IE during the last ROUTING AREA UPDATE procedure.
Ref... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.10.2 Test purpose | To verify that a MS that supports eDRX and requests the use of eDRX will include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
To verify that a MS that supports eDRX and requests the use of eDRX will use the extended idle mode DRX cycle only if the network has provided the extended DRX para... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.10.3 Method of test | Initial conditions
System Simulator:
- Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
- Both cells are operating in network operation mode II.
- Both cells support eDRX.
Mobile Station:
- The MS has a valid IMSI. MS is Idle Updated on cell A.
- The MS is configured to use eDRX.
- The MS is con... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.11 Routing area updating / eDRX / Usage condition change | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.11.1 Conformance requirement | 1) If a change in the eDRX usage conditions at the MS requires eDRX activation or deactivation, or a change of different extended DRX parameters, the MS shall initiate the routing area updating procedure and include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
2) The MS shall use the exte... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.11.2 Test purpose | To verify that a MS shall initiate the routing area updating procedure and include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message if there is a change of eDRX usage conditions.
To verify that a MS that supports eDRX and requests the use of eDRX will use the extended idle mode DRX cycle only i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.1.11.3 Method of test | Initial conditions
System Simulator:
- One cell operating in network operation mode II.
- The cell supports eDRX.
Mobile Station:
- The MS has a valid IMSI. MS is Idle Updated on cell A.
- The MS is configured to deactivate eDRX.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operation mo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2 Combined routing area updating | The combined routing area updating procedure is a GMM procedure used by GPRS MSs of MS operation mode A or B that are IMSI attached for GPRS and non-GPRS services. In order to use the combined routing area updating procedure, the network must operate in network operation mode I. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.1 Combined routing area updating / combined RA/LA accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.1.1 Conformance requirement | 1) If the network accepts the combined routing area updating procedure and reallocates a P-TMSI, the MS shall acknowledge the new P-TMSI and continue communication with the new P-TMSI.
2) If the network accepts the combined routing area updating procedure from the MS without reallocation of the old P-TMSI, the MS shall... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.1.2 Test purpose | To test the behaviour of the MS if the network accepts the combined routing area updating procedure.
The following cases are identified:
1) P-TMSI / P-TMSI signature is reallocated;
2) Old P-TMSI / P-TMSI signature is not changed;
3) Mobile terminating CS call is allowed with IMSI;
4) Mobile terminating CS call is allo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.1.3 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)- MS operation mod... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.2 Combined routing area updating / MS in CS operation at change of RA | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.2.1 Conformance requirement | GPRS MS that is in an ongoing CS transaction at change of routing area shall initiate the routing area updating procedure only after the CS transaction has been released.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.2.2 Test purpose | To test the behaviour of the MS when using the combined routing area updating procedure in cases where the MS is CS connected at change of RA. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.2.3 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)- Switch off on bu... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3 Combined routing area updating / RA only accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3.1 Conformance requirement | 1) If the network accepts the combined routing area updating procedure, but GMM cause code 'IMSI unknown in HLR' is sent to the MS the Mobile Station shall delete the stored TMSI, LAI and CKSN. The Mobile Station shall consider SIM invalid for non-GPRS services until power is switched off or SIM is removed.
2) If the n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3.2 Test Purpose | Test purpose 1
To test the behaviour of the MS if the network accepts the routing area updating procedure with indication RA only, GMM cause 'IMSI unknown in HLR'.
Test purpose 2
To test the behaviour of the MS if the network accepts the routing area updating procedure with indication RA only, GMM cause 'MSC temporaril... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3.3.1 Test Procedure 1 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_oper... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.3.3.2 Test Procedure 2 | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells operating in network operation mode I. T3212 is set to 6 minutes.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.4 Combined routing area updating / rejected / PLMN not allowed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.4.1 Conformance requirement | 1) If the network rejects a combined routing area updating procedure from the Mobile Station with the cause 'PLMN not allowed' the Mobile Station shall:
1.1. not perform combined GPRA attach when switched on in the same location area or PLMN;
1.2. delete the stored RAI, GPRS-CKSN, P-TMSI, P-TMSI signature, TMSI CKSN an... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.4.2 Test purpose | To test the behaviour of the MS if the network rejects the combined routing area updating procedure of the MS with the cause 'PLMN not allowed'. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.4.3 Method of test | Initial conditions
System Simulator:
Four cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1, cell B in MCC1/MNC2/LAC1/RAC2, cell C in MCC1/MNC2/LAC2/RAC1 and cell D in MCC2/MNC1/LAC1/RAC1.
All four cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Upd... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5 Combined routing area updating / rejected / roaming not allowed in this location area | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5.1 Conformance requirement | For a R97 and R98 MS only:
1) If the network rejects a combined routing area updating procedure from the Mobile Station with the cause 'roaming not allowed in this location area' the Mobile Station:
1.1 shall not perform combined GPRS attach when in the same location area;
1.2 shall delete the stored RAI, GPRS-CKSN, P-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5.2 Test purpose | Test purpose 1
To test that on receipt of a rejection using the 'Roaming not allowed in this area' cause code, the MS ceases trying a routing area updating procedure on that location area. Successful combined routing area updating procedure is possible in other location areas.
Test purpose 2
To test that if the MS is s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5.3.1 Test procedure 1 | Initial conditions
System Simulator:
Two cells, cell A in MCC2/MNC1/LAC1/RAC1 (RAI-2), cell B in MCC2/MNC1/LAC2/RAC1 (RAI-6).
Both cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.5.3.2 Test procedure 2 | Initial conditions
System Simulator:
Two cells, cell A in MCC2/MNC1/LAC1/RAC1, cell B in MCC2/MNC1/LAC2/RAC1.
Both cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)- MS operation... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6 Combined routing area updating / abnormal cases / access barred due to access class control | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6.1 Conformance requirement | 1) The MS shall not perform combined routing area updating procedure, but stays in the current serving cell and applies normal cell reselection process.
2) The Mobile Station shall perform the combined routing area updating procedure when:
2.1 Access is granted.
2.2 Cell is changed.
Reference(s):
3GPP TS 04.08 / 3GPP T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6.2 Test purpose | Test purpose 1
To test the behaviour of the MS in case of access class control (access is granted).
Test purpose 2
To test the behaviour of the MS in case of access class control (cell is changed). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6.3.1 Test procedure 1 | Initial conditions
An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is initially indicated to be barred on Cell B.
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 has Access C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.6.3.2 Test procedure 2 | Initial conditions
An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is indicated to be barred on cell B.
System Simulator:
Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 has access class x n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.7 Combined routing area updating / abnormal cases / attempt counter check / procedure timeout | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.7.1 Conformance requirement | 1) When a T3330 timeout has occurred during a routing area updating procedure, the Mobile Station shall repeat the routing area updating procedure after T3330 timeout until the procedure is repeated five times.
2) When a routing area updating procedure is repeated five times, the routing area updating attempt counter i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.7.2 Test purpose | To test the behaviour of the MS with respect to the routing area updating attempt counter. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.7.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC/LAC1/RAC2. T3302 is set to 12 minutes.
Both cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.8 Combined routing area updating / abnormal cases / change of cell into new routing area | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.8.1 Conformance requirement | When a change of cell into a new routing area is performed before the routing area updating procedure is finished, the MS shall abort the routing area updating procedure and re-initiate it in the new routing area.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.8.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.8.3 Method of test | Initial conditions
System Simulator:
Three cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2, cell C in MCC1/MNC1/LAC1/RAC3.
All three cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.9 Combined routing area updating / abnormal cases / change of cell during routing area updating procedure | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.9.1 Conformance requirement | When a change of cell within new routing area is performed before the routing area updating procedure is finished, the MS shall perform the cell update before the routing area updating procedure is finished.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.9.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.9.3 Method of test | Initial conditions
System Simulator:
Three cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2, cell C in MCC1/MNC1/LAC1/RAC2.
All three cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10 Combined routing area updating / abnormal cases / GPRS detach procedure collision | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10.1 Conformance requirement | 1) When a detach request is received with cause 'GPRS detach' or 'combined GPRS/IMSI detach' by the MS while waiting for a ROUTING AREA UPDATE ACCEPT message, the MS shall terminate the routing area updating procedure and continue with the GPRS detach procedure.
2) When a detach request is received with cause 'IMSI det... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10.3.1 Test procedure 1 | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)- MS operation... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.10.3.2 Test procedure 2 | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode I.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)- MS operation... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.11 Combined routing area updating / eDRX | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.11.1 Conformance requirement | 1) If the MS supports eDRX and requests the use of eDRX, the MS shall include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
2) The MS shall use the extended idle mode DRX cycle only if the network has provided the extended DRX parameters IE during the last ROUTING AREA UPDATE procedure.
Ref... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.11.2 Test Purpose | To verify that a MS that supports eDRX and requests the use of eDRX will include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
To verify that a MS that supports eDRX and requests the use of eDRX will use extended idle mode DRX cycle only if the network has provided the extended DRX paramete... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.2.11.3 Method of test | Initial conditions
System Simulator:
- Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
- Both cells operating in network operation mode I.
- Both cells support eDRX.
Mobile Station:
- The MS has a valid IMSI. MS is Idle Updated on cell A.
- The MS is configured to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3 Periodic routing area updating | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.1 Periodic routing area updating / accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.1.1 Conformance requirement | The Mobile Station shall perform a periodic routing area update procedure after a T3312 timeout.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.2.2 and 4.7.5.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.1.2 Test purpose | To test the behaviour of the MS with respect to the periodic routing area updating procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.1.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
Specific PICS statements:
- MS operation mode C (TSPC_operation_mode_C).
- MS operation mode B (TSPC_operation_mode_B).
- Switch off on button (TSPC_Feat_OnOff... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.2 Periodic routing area updating / accepted / T3312 default value | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.2.1 Conformance requirement | The Mobile Station shall perform a periodic routing area update procedure after a T3312 timeout.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.2.2 and 4.7.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.2.2 Test purpose | To test the behaviour of the MS with respect to the periodic routing area updating procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.2.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode I.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B)
- MS operation mode C (TSPC_operation_mode_C)
- Switch off on button (TSPC_Feat_OnOff).
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.3 Periodic routing area updating / no cell available / network mode I | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.3.1 Conformance requirement | If the MS is both IMSI attached for GPRS and non-GPRS services, and if the MS lost coverage of the registered PLMN and timer T3312 expires; if the MS returns to coverage in a cell that supports GPRS and the network is in network operation mode I, then the MS shall perform a combined routing area update procedure indica... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.3.2 Test purpose | To test the behaviour of the MS with respect to the periodic routing area updating procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.3.3 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Cell A is operating in network operation mode II and cell B is in network operation mode I.
Mobile Station:
The MS has a valid TMSI-1, P-TMSI-1 and RAI-1. MS is Idle Updated on cell A.
Specific PICS statements:... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.4 Periodic routing area updating / no cell available | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.4.1 Conformance requirement | If the MS is both IMSI attached for GPRS and non-GPRS services, and if the MS lost coverage of the registered PLMN and timer T3312 expires; if the MS returns to coverage in a cell that supports GPRS and the network is in network operation mode II, then the MS shall perform a periodic routing area update procedure and a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.4.2 Test purpose | To test the behaviour of the MS with respect to the periodic routing area updating procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.4.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
Specific PICS statements:
- Switch off on button (TSPC_Feat_OnOff).
- Automatic GPRS attach procedure at switch on or power on (TSPC_AddInfo_on_auto_GPRS_AP).
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.5 Periodic routing area updating / eDRX | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.5.1 Conformance requirement | 1) If the MS supports eDRX and requests the use of eDRX, the MS shall include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
2) The MS shall use the extended idle mode DRX cycle only if the network has provided the extended DRX parameters IE during the last ROUTING AREA UPDATE procedure.
Ref... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.5.2 Test purpose | To verify that a MS that supports eDRX and requests the use of eDRX will include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message.
To verify that a MS that supports eDRX and requests the use of eDRX will use the extended idle mode DRX cycle only if the network has provided the extended DRX para... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.3.3.5.3 Method of test | Initial conditions
System Simulator:
- One cell operating in network operation mode II.
- The cell supports eDRX.
Mobile Station:
- The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
- The MS is configured to use eDRX.
- The MS is configured to use a specific value of extended DRX cycle.
Specific PICS statement... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.4 P-TMSI reallocation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.4.1 Conformance requirement | 1) A Mobile Station shall acknowledge a new P-TMSI when explicitly allocated.
2) The P-TMSI shall be updated on the SIM when the Mobile Station is correctly deactivated in accordance with the manufacturer's instructions.
3) A Mobile Station shall use the given P-TMSI in further communication with the network.
Reference... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.4.2 Test Purpose | To verify that the MS is able to receive and acknowledge a new P-TMSI by means of an explicit P-TMSI reallocation procedure.
To verify that the MS has stored the P-TMSI in a non-volatile memory.
The implicit reallocation procedure is tested in the attach procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.4.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operation mode C (TSPC_operation_mode_C) (only if mode B not supported).
- Switch off on button... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5 GPRS authentication and ciphering | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1 Test of authentication | The purpose of this procedure is to verify the user identity. A correct response is essential to guarantee the establishment of the connection. If not, the connection will drop. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.1 Authentication accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.1.1 Conformance requirement | A Mobile Station shall correctly respond in an authentication and ciphering procedure by sending a response with the SRES information field set to the same value as the one produced by the authentication and ciphering algorithm in the network.
In a UMTS authentication challenge, if the AUTHENTICATION_AND_CIPHERING REQU... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.1.2 Test purpose | To verify that the MS is able to authenticate itself for GPRS transmission using the USIM application through an UMTS challenge. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.1.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II, SGSN is R99
Mobile Station:
Test USIM is plugged into the MS.
The MS has a valid IMSI. MS is Idle Updated on cell A.
Specifi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.2 Authentication rejected | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.5.1.2.1 Conformance requirement | 1. Upon receipt of an AUTHENTICATION AND CIPHERING REJECT message, the MS shall set the GPRS update status to GU3 ROAMING NOT ALLOWED and shall delete the P-TMSI, P-TMSI signature, RAI and GPRS ciphering key sequence number stored.
2. The SIM shall be considered as invalid until switching off or the SIM is removed.
3. ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.