hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 52.10.4.1 Conformance requirements | EGPRS TBF mode capable MSs shall monitor the GPRS Cell Options IE on the BCCH (SI13) for the cell's EGPRS capability. In the GPRS Cell Options IE it is also indicated if the EGPRS PACKET CHANNEL REQUEST is supported in the cell. If the mobile station supports the IMMEDIATE PACKET ASSIGNMENT message, the mobile station ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 52.10.4.2 Test purpose | To verify that the IPA capable MS uses the correct Access Type in the EGPRS PACKET CHANNEL REQUEST for upper layer signalling transfer when EGPRS PACKET CHANNEL REQUEST is supported in GPRS cell options and PBCCH is not present. Check that Access Type = ‘Signalling by IPA capable MS’. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 52.10.4.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH. EGPRS supported. EGPRS PACKET CHANNEL REQUEST supported in GPRS cell options. Paging messages configured to indicate support for IMMEDIATE PACKET ASSIGNMENT message (IPA support bit set to '1').
Mobile Station:
MS is GPRS attached.
Specific PICS Sta... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1 Acknowledged Mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1 Acknowledged Mode/ Uplink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.1 Acknowledged Mode/ Uplink TBF/ Send State Variable V(S) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.1.1 Conformance requirements | 1. The send state variable V(S), can take on the values 0 through 2 047. Each RLC data block contains a block sequence number (BSN) field that is 11 bits in length. At the time that an in-sequence RLC data block is designated for transmission, the value of BSN is set equal to the value of the send state variable.
2. V(... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.1.2 Test purpose | 1. To verify that the mobile station sets the V(S) to 0 at the beginning of each TBF.
2. To verify that the mobile station increases the V(S) by 1 after transmission of the RLC data block with BSN set to V(S).
3. To verify that the mobile station wraps the V(S) to 0 after 2047. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.2 Acknowledged Mode/ Uplink TBF/ Acknowledge State Variable V(A) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.2.1 Conformance requirements | 1. The Acknowledge state variable V(A) contains the BSN value of the oldest RLC data block that has not been positively acknowledged by its peer. V(A) can take on the values 0 through 2047.
2. V(A) shall be set to the value 0 at the beginning of each TBF in which the RLC endpoint is the transmitter.
3. The value of V(... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.2.2 Test purpose | 1. To verify that the mobile station correctly decodes the RB and updates the values of V(A). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.3 Acknowledged Mode/ Uplink TBF/ Window Size/ Default Value | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.3.1 Conformance requirements | 1. In case a PACKET TIMESLOT RECONFIGURE is sent to the MS without any window size for a specific TBF, then any previous value received for the specific TBF shall be used or, if no previous value has been received for the specific TBF, default window size shall be used.
References
3GPP TS 04.60, subclause 9.1.9.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.3.2 Test purpose | 1. To verify that when a PACKET TIMESLOT RECONFIGURE is sent to the MS without any window size indication, the previous value received for the specific TBF shall be used if there's any. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- EGPRS Multislotclass (TSPC_Type_EGPRS_Multislot_ClassX where X = ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.4 Acknowledged Mode/ Uplink TBF/ Window Size/ Assigned Value | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.4.1 Conformance requirements | 1. For EGPRS the window size (WS) shall be set by the network according to the number of timeslots allocated in the direction of the TBF (uplink or downlink). MS shall support the maximum window size corresponding to its multi timeslot capability.
2. The selected WS shall be indicated within PACKET UPLINK/DOWNLINK ASSI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.4.2 Test purpose | 1. To verify that the MS correctly recognise the window size indicated in Packet Uplink Assignment messages.
2. To verify that the MS operates correctly according to the window size indicated in PACKET TIMESLOT RECONFIGURE messages.
3. To verify that the MS supports the maximum window size corresponding to its multi ti... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.4.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- EGPRS Multislotclass (TSPC_Type_EGPRS_Multislot_ClassX where X = ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.5 Acknowledged mode/ Uplink TBF/ Invalid Negative Acknowledgement | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.5.1 Conformance requirements | 1. The mobile station shall not modify the element in the acknowledge state array, V(B), corresponding to an RLC data block that cannot be validly negatively acknowledged (subclause 9.1.8 3GPP TS 04.60).
References
3GPP TS 04.60, subclauses 9.1.3 and 9.1.8. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.5.2 Test purpose | 1. To verify the correct response of the mobile station to an invalid negative acknowledgement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.5.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.6 Acknowledged Mode/ Uplink TBF/ Countdown Value | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.6.1 Conformance requirements | 1. The mobile station shall send the Countdown Value (CV) in each uplink RLC data block to indicate to the network the absolute BSN (BSN') of the last RLC data block that will be sent in the uplink TBF.
2. When a radio block for EGPRS data transfer consists of two RLC data blocks, the CV value of the RLC/MAC header ref... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.6.2 Test purpose | 1. To verify that when a radio block for EGPRS data transfer consists of two RLC data blocks, the CV value is calculated based on BSN of the second RLC data block. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.6.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.7 Acknowledged Mode/ Uplink TBF/ Interpretation of Receive Block Bitmap | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.7.1 Conformance requirements | 1. In an uplink EGPRS TBF, if a compressed Reported Bitmap is received by the mobile station, the bitmap shall first be decompressed.
2. The uncompressed bitmap shall then be treated as follows:
1) Firstly, if the BOW bit is set in the Reported Bitmap, then this bitmap acknowledges all blocks between V(A) and (SSN- 2) ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.7.2 Test purpose | 1. To verify that the mobile station retransmits the blocks corresponds to the '0' bits in the uncompressed bitmap.
2. To verify that if the BOW bit is set in the Reported Bitmap, then this bitmap acknowledges all blocks between V(A) and (SSN- 2) modulo SNS.
3. To verify a bitmap value of '0' is assumed at the bit posi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.7.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to establish an ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.8 Acknowledged Mode/ Uplink TBF/ Pre-emptive Transmission/ Default Mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.8.1 Conformance requirements | 1. If [V(S) < V(A) + WS] modulo SNS and no RLC data blocks have a corresponding element in V(B) with the value NACKED, the RLC data block with BSN = V(S) shall be transmitted and the corresponding element in V(B) shall be set to the value PENDING_ACK. If the transmitter is the mobile station, the pre-emptive transmissi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.8.2 Test purpose | 1. To verify that the MS shall use pre-emptive transmission as default mode before PACKET UPLINK ACK/NACK messages are received. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.8.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to establish an ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.9 Acknowledged Mode/ Uplink TBF/ Pre-emptive Transmission Bit Set to '1' | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.9.1 Conformance requirements | 1. If [V(S) < V(A) + WS] modulo SNS and no RLC data blocks have a corresponding element in V(B) with the value NACKED, the RLC data block with BSN = V(S) shall be transmitted and the corresponding element in V(B) shall be set to the value PENDING_ACK.
2. If the transmitter is the mobile station, the pre-emptive transmi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.9.2 Test purpose | 1. To verify when pre-emptive bit is set to '1' and there are no further data to be transmitted, the MS shall transmit the PENDING_ACK data blocks repeatedly.
2. To verify when pre-emptive bit is set to '1' and the transmission widow is stalled, the MS shall transmit the PENDING_ACK data blocks repeatedly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.9.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.10 Acknowledged Mode/ Uplink TBF/ Pre-emptive Transmission Bit Set to '0'/ PENDING_ACK Blocks | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.10.1 Conformance requirements | 1. If the transmitter is the mobile station and the pre-emptive transmission bit is set to '0'in the PACKET UPLINK ACK/NACK message the transmitter shall not transmit the oldest RLC data block whose corresponding element in V(B) has the value PENDING_ACK (and the next continuing indefinitely). When a PACKET UPLINK ACK/... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.10.2 Test purpose | 1. To verify that the MS shall not retransmit the PENDING_ACK blocks when pre-emptive bit is set to '0' and the block is not the last block in the TBF.
2. To verify that the MS shall retransmit the PENDING_ACK blocks when pre-emptive bit is set to '0' and the block is the last block in the TBF. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.10.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to transmit WS+2... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.11 Acknowledged Mode/ Uplink TBF/ Pre-emptive Transmission Bit Set to '0'/ Negative Acknowledgement | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.11.1 Conformance requirements | 1. If the transmitter is the mobile station and the pre-emptive transmission bit is set to '0'in the PACKET UPLINK ACK/NACK message the transmitter shall not transmit the oldest RLC data block whose corresponding element in V(B) has the value PENDING_ACK (and the next continuing indefinitely). When a PACKET UPLINK ACK/... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.11.2 Test purpose | 1. To verify that the MS shall transmit the NACKED blocks when pre-emptive bit is set to '0'. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.11.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to transmit N up... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.12 Acknowledged Mode/ Uplink TBF/ Retransmission/ Split RLC Data Block | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.12.1 Conformance requirements | 1. In RLC acknowledged mode, each RLC endpoint transmitter shall have an associated acknowledge state array (V(B)).
2. The transmitter shall transmit the oldest RLC data block whose corresponding element in V(B) indexed relative to V(A) has the value NACKED. As each RLC data block is transmitted the corresponding eleme... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.12.2 Test purpose | 1. To verify that if the RLC data block to be transmitted is split over two radio blocks, both radio blocks shall be transmitted.
2. To verify the correct setting of the Split Block field in the block header.
3. To verify that the order of the retransmitted two parts of the data block is correct. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.12.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.13 Acknowledged Mode/ Uplink TBF/ Calculation of BSN2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.13.1 Conformance requirements | 1. Each RLC data block contains a block sequence number (BSN) field that is 11 bits in length. At the time that an in‑sequence RLC data block is designated for transmission, the value of BSN is set equal to the value of the send state variable V(S).
2. The transfer of RLC data blocks in the RLC acknowledged mode uses r... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.13.2 Test purpose | 1. To verify that the mobile station correctly calculate the value of BSN 2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.13.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.14 Acknowledged Mode/ Uplink TBF/ Verification of Coding Schemes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.14.1 Conformance requirements | 1. In EGPRS TBF mode, RLC data blocks that are transmitted for the first time shall be transmitted with the MCS commanded, except if the commanded mode is MCS-5-7, in which case the data block shall be transmitted with MCS‑5, or if the commanded mode is MCS-6-9, in which case the data block shall be transmitted with MC... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.14.2 Test purpose | 1. To verify that the mobile station uses the correct channel coding commanded by the Network for initial transmission.
2. To verify that correct channel coding command is used for retransmission. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.14.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
PIXIT Stat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.15 Acknowledged Mode/ Uplink TBF/ Recalculation of CV on MCS change | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.15.1 Conformance requirements | 1. The mobile station shall send the Countdown Value (CV) in each uplink RLC data block to indicate to the network the absolute BSN (BSN') of the last RLC data block that will be sent in the uplink TBF. The CV shall be calculated as follows.
where:
- TBC = total number of RLC data blocks that will be transmitted in the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.15.2 Test purpose | To verify that the mobile station correctly recalculates the CV values when the MCS is changed during countdown procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.15.2 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.16 Acknowledged Mode/ Uplink TBF/ Retransmission/ Padding in the Data Field | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.16.1 Conformance requirements | 1. According to the link quality, an initial Modulation and Coding Scheme (MCS) is selected for an RLC block. For the retransmissions, the same or another MCS from the same family of MCSs can be selected.
2. For blocks initially transmitted with MCS-8 which are retransmitted using MCS-6 or MCS-3, padding of the first s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.16.2 Test purpose | 1. To verify the padding of the first six octets in the data field for blocks initially transmitted with MCS-8 and retransmitted using MCS-6 or MCS-3.
2. To verify that the CPS field is set to indicate padding in the retransmitted blocks. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.16.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capable MS is made to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.17 Acknowledged Mode/ Uplink TBF/ Retransmission/ Puncturing Scheme Cycle | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.17.1 Conformance requirements | 1. On initial transmission the RLC data blocks are sent with one of the initial code rates (the rate 1/3 encoded data is punctured with Puncturing Scheme (PS) 1 of the selected Modulation and Coding Scheme MCS) and if the RLC data block is required to be retransmitted it is sent with PS 2 of the selected MCS.
2. If the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.17.2 Test purpose | 1. To verify that if the RLC data block is required to be retransmitted it is sent with PS 2 of the selected MCS for the first retransmission.
2. On subsequent retransmissions the RLC data block is transmitted with PS in a cyclic way. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.17.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
PIXIT Stat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.18 EGPRS Acknowledged mode / Uplink TBF / Link Adaptation Procedure for retransmission | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.18.1 Conformance requirements | 1. In EGPRS TBF mode, RLC data blocks that are transmitted for the first time shall be transmitted with the MCS commanded, except if the commanded mode is MCS-5-7, in which case the data block shall be transmitted with MCS-5, or if the commanded mode is MCS-6-9, in which case the data block shall be transmitted with MC... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.18.2 Test purpose | 1. To verify that the mobile station retransmits Nacked data blocks with the MCS commanded and according to table 1 (see above). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.18.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, , PBCCH not present.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
PIXIT Statements
-
Test Pro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.19 EGPRS Acknowledged mode / Uplink TBF / Link Adaptation Procedure for initial transmission | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.19.1 Conformance requirements | 1. In EGPRS TBF mode, RLC data blocks that are transmitted for the first time shall be transmitted with the MCS commanded, except if the commanded mode is MCS-5-7, in which case the data block shall be transmitted with MCS-5, or if the commanded mode is MCS-6-9, in which case the data block shall be transmitted with MC... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.19.2 Test purpose | 1. To verify that the mobile station transmits data blocks with the correct MCS in initial transmission. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.19.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, , PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
PIXIT Statements
-
Test Pro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.20 Acknowledged Mode/ Uplink TBF/ Retransmission/ MCS Selection without Re-segmentation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.20.1 Conformance requirements | 1. If the transmitter side is the mobile station and the re-segment bit is not set, the mobile station shall use an MCS within the same family as the initial MCS without splitting the payload (refer to subclause 8.1.1 table 8.1.1.2, 3GPP TS 04.60) for retransmission.
References
3GPP TS 04.60, subclause 8.1.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.20.2 Test purpose | 1. To verify that if the re-segment bit is not set, the mobile station shall use an MCS within the same family as the initial MCS without splitting the payload for retransmission in accordance with subclause 8.1.1 table 8.1.1.2, 3GPP TS 04.60. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.20.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
PIXIT Stat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.21 Acknowledged Mode/ Uplink TBF/ Initial Puncturing Scheme After MCS Switching | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.21.1 Conformance requirements | 1. RLC data blocks which are retransmitted using a new MCS shall at the first transmission after the MCS switch be sent with the puncturing scheme indicated in table 9.3.2.1.1, 3GPP TS 04.60 subclause 9.3.2.1.
References
3GPP TS 04.60, subclause 9.3.2.1.
3GPP TS 05.05.
3GPP TS 05.09. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.21.2 Test purpose | 1. To verify the correct selection of initial PS scheme after MCS switch. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.21.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to transmit upli... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.22 Acknowledged Mode/ Uplink TBF/ Recalculation of CV on TBC change | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.22.1 Conformance requirements | 1. The mobile station shall send the Countdown Value (CV) in each uplink RLC data block to indicate to the network the absolute BSN (BSN') of the last RLC data block that will be sent in the uplink TBF. The CV shall be calculated as follows.
where:
- TBC = total number of RLC data blocks that will be transmitted in the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.22.2 Test purpose | To verify that the mobile station correctly recalculates the CV values when the TBC change due to an MCS change during countdown procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.22.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.23 Acknowledged Mode/ Uplink TBF/ Interpretation of Compressed Bitmap | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.23.1 Conformance requirements | If the window size is larger than the number of bits available for the bitmap, then one-dimensional run length coding (based on ITU-T T.4) is carried out starting at SSN.
If a compressed reported bitmap is received, the bitmap shall first be decompressed
Firstly, if the BOW bit in PACKET UPLINK/DOWNLINK ACK/NACK has th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.23.2 Test purpose | To verify that the MS correctly decodes the Compressed bitmap. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.23.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.24.1 Conformance requirements | For EGPRS uplink TBFs, the network may select any composition of the Packet Ack/Nack message to send to the MS. SSN is determined by the receiver as a function of ES/P, V(Q) and PBSN.
If the receiving side is the network, the network may select any SSN within the receive window.
The BOW (begin of window) bit shall be s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.24.2 Test purpose | To verify that the MS is correctly able to interpret a received bitmap by taking into consideration BOW, EOW and SSN fields. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.1.24.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The EGPRS capab... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.