instruction stringlengths 29 35k | input stringclasses 1
value | output stringlengths 29 35k |
|---|---|---|
Fault Detecting Data - MICRO_CLOCK_PLAUSIBILITY_FAILURE Create the mechanism to post process filter out counts based on the one pager input. Users can now filter based on OnePager recommended counts and also if there are data sets above the recommended counts. Training material updated at this link:
https://trw1.shar... | Fault Detecting Data - MICRO_CLOCK_PLAUSIBILITY_FAILURE Create the mechanism to post process filter out counts based on the one pager input. Users can now filter based on OnePager recommended counts and also if there are data sets above the recommended counts. Training material updated at this link:
https://trw1.shar... | |
[VW KPM] VZM: Kein Halten durch EPB im Stillst. nach Notst. [Error Description]: Testablauf:
Zur Überprüfung des Übergangs der Primärsystemverfügbarkeit von Aktiv Ausgelöst auf Systemkomponente defekt durch Abriss des primären EPB Aktors wird die EPB am ESC abgerissen, anschließend erfolgt eine direkte Auslösung des No... | [VW KPM] VZM: Kein Halten durch EPB im Stillst. nach Notst. [Error Description]: Testablauf:
Zur Überprüfung des Übergangs der Primärsystemverfügbarkeit von Aktiv Ausgelöst auf Systemkomponente defekt durch Abriss des primären EPB Aktors wird die EPB am ESC abgerissen, anschließend erfolgt eine direkte Auslösung des No... | |
[VW KPM] VZM: Kein Halten durch EPB im Stillst. nach Notst. [Error Description]: Testablauf:
Zur Überprüfung des Übergangs der Primärsystemverfügbarkeit von Aktiv Ausgelöst auf Systemkomponente defekt durch Abriss des primären EPB Aktors wird die EPB am ESC abgerissen, anschließend erfolgt eine direkte Auslösung des No... | [VW KPM] VZM: Kein Halten durch EPB im Stillst. nach Notst. [Error Description]: Testablauf:
Zur Überprüfung des Übergangs der Primärsystemverfügbarkeit von Aktiv Ausgelöst auf Systemkomponente defekt durch Abriss des primären EPB Aktors wird die EPB am ESC abgerissen, anschließend erfolgt eine direkte Auslösung des No... | |
Parent OP WS2 GM 31xx.2 IBC - Fault Detecting Data - Missing Comms messages setting after transition to OFF - MISSING_SEC_AXL,MISSING_SRL_DAT_35_PRTCTD_MSG,MISSING_XFER_CASE_GEN_INFO From: Polito Daniel <daniel.polito@zf.com>
Sent: Thursday, May 13, 2021 11:10 AM
To: Cleveland Don <don.cleveland@zf.com>; KC Nagabhusha... | Parent OP WS2 GM 31xx.2 IBC - Fault Detecting Data - Missing Comms messages setting after transition to OFF - MISSING_SEC_AXL,MISSING_SRL_DAT_35_PRTCTD_MSG,MISSING_XFER_CASE_GEN_INFO From: Polito Daniel <daniel.polito@zf.com>
Sent: Thursday, May 13, 2021 11:10 AM
To: Cleveland Don <don.cleveland@zf.com>; KC Nagabhusha... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | |
[VW ID Buzz][EBB][F&C] Rack load monitor [Error Description]: Beanstandung aus Breitenerprobung
Vorbedingungen:
Ego und MIB aktiv seit circa 15 Minuten. Ego wurde in P gestellt und der Klemmenzyklus durch den ZAT beendet. Ego steht im Parkhaus von Hohenbüchen 8, Wolfsburg. Der Nutzer Gast ist angemeldet. Das ETM ist ... | [VW ID Buzz][EBB][F&C] Rack load monitor [Error Description]: Beanstandung aus Breitenerprobung
Vorbedingungen:
Ego und MIB aktiv seit circa 15 Minuten. Ego wurde in P gestellt und der Klemmenzyklus durch den ZAT beendet. Ego steht im Parkhaus von Hohenbüchen 8, Wolfsburg. Der Nutzer Gast ist angemeldet. Das ETM ist ... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor requires to store specific data in NVRAM. Therefore a new NVRAM block BC_SERVICES_RLM shall be created. A description of the block is attached to this CR. Brief analysis summary:
------------------------------------------------------------------------------... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor requires to store specific data in NVRAM. Therefore a new NVRAM block BC_SERVICES_RLM shall be created. A description of the block is attached to this CR. Brief analysis summary:
------------------------------------------------------------------------------... | |
[VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | [VW ID Buzz][EBB][F&C] Rack load monitor The rack load monitor is required to collect and analyze information about the EBB rack usage. If the data indicate excessive usage which could lead to an over loading and damage of the mechanical parts, the monitor shall set a failure code and degrade the EBB for safety reason.... | |
[BSW_Test]:NM message 505 is not transmitted when wake up the ECU with NM messages Issue:
NM message 505 is not transmitted when wake up the ECU with NM messages
SWTD test case ID: 28836 For the procedure. Req id: 1658
Switch on network emulation to request all PNs expected:
DUT shall start communication on the netwo... | [BSW_Test]:NM message 505 is not transmitted when wake up the ECU with NM messages Issue:
NM message 505 is not transmitted when wake up the ECU with NM messages
SWTD test case ID: 28836 For the procedure. Req id: 1658
Switch on network emulation to request all PNs expected:
DUT shall start communication on the netwo... | |
[BSW_Test]:NM message 505 is not transmitted when wake up the ECU with NM messages Issue:
Message 0x 104 is not updating w.r.t 0x 2E0 (usage mode ,car mode etc vehicle global mode signals
SW: GE30_P02_M10_S02_VTx_X01_040-060-001_O --------------------------------------------------------------------------------
Ai... | [BSW_Test]:NM message 505 is not transmitted when wake up the ECU with NM messages Issue:
Message 0x 104 is not updating w.r.t 0x 2E0 (usage mode ,car mode etc vehicle global mode signals
SW: GE30_P02_M10_S02_VTx_X01_040-060-001_O --------------------------------------------------------------------------------
Ai... | |
[APP]Geely_Lotus Carry over KX11 open point 5049135 [SYS.5] (S_FIVEMIN_RULE) is not set to true when specific conditions occurs Activity Description:
This working package deals with Software Component (SWC) Deisgn and construction which based on already developed or defined SW Requirement and SW Architecture, furthe... | [APP]Geely_Lotus Carry over KX11 open point 5049135 [SYS.5] (S_FIVEMIN_RULE) is not set to true when specific conditions occurs Activity Description:
This working package deals with Software Component (SWC) Deisgn and construction which based on already developed or defined SW Requirement and SW Architecture, furthe... | |
[APP]Geely_Lotus Carry over KX11 open point 5049135 [SYS.5] (S_FIVEMIN_RULE) is not set to true when specific conditions occurs Summary description of problem:
Sample: According to [AACM_841], the system should [Set S_FIVEMIN_RULE to true] when [Vehicle speed received from both lanes not valid(S_VEHICLE_SPEED_QF == ... | [APP]Geely_Lotus Carry over KX11 open point 5049135 [SYS.5] (S_FIVEMIN_RULE) is not set to true when specific conditions occurs Summary description of problem:
Sample: According to [AACM_841], the system should [Set S_FIVEMIN_RULE to true] when [Vehicle speed received from both lanes not valid(S_VEHICLE_SPEED_QF == ... | |
[X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all relevant requirements for comms according to the allocated requirements in spec “dc_ti_707_ts electronic integration”
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_... | [X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all relevant requirements for comms according to the allocated requirements in spec “dc_ti_707_ts electronic integration”
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_... | |
[X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to diag according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf ------------... | [X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to diag according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf ------------... | |
[X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to mode management according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf -... | [X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to mode management according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf -... | |
[X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to fm according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf aimen rouissi ... | [X0400] Realize Requirements for "DC_TI_707_TS Electronic Integration" implement all requirements allocated to fm according to the spec “dc_ti_707_ts electronic integration” .
01991_21_00194_v1_0_dc_ti_707_ts_electronic_integration_and_putting_ecus_into_operation_baseline_6_0_filtre_esc_k0_05022021.pdf aimen rouissi ... | |
DFM_G59_EPBi_Clampforce double check GGO - 03.08.21 - 08:38:
Tested SW in ECU was not correct (see attached email).
This CR can be rejected.
GGO - 29.07.21 - 13:48:
email attached
Load current in TFT do not match parameter file.
Rui Tai 20210729:
By TFT testing, found clamp force is much bigger than CDS definiti... | DFM_G59_EPBi_Clampforce double check GGO - 03.08.21 - 08:38:
Tested SW in ECU was not correct (see attached email).
This CR can be rejected.
GGO - 29.07.21 - 13:48:
email attached
Load current in TFT do not match parameter file.
Rui Tai 20210729:
By TFT testing, found clamp force is much bigger than CDS definiti... | |
Please update the Software Architecture Design During the review of the SW architecture design, issues were identified refer mail attached.
kindly do the needy to fix the issue.
Upon reviewing model checker results, it was found that components Fee, Fls, and Can should be in the VP_TRW_D partition. Silent-D analysis... | Please update the Software Architecture Design During the review of the SW architecture design, issues were identified refer mail attached.
kindly do the needy to fix the issue.
Upon reviewing model checker results, it was found that components Fee, Fls, and Can should be in the VP_TRW_D partition. Silent-D analysis... | |
[DMT G59 2PP]:brake light on during PostRun when no driver brake apply Issue description :
Press brake pedal after key off until EMS_BRAKEPEDAL signal stop, then release brake pedal , ESC_BLREQUEST is aways reuqest to switch on brake light. Terry 20210801:
the ‘INPUT_VALID_BRAKE_PEDAL’ had updated to false in G59 2PP... | [DMT G59 2PP]:brake light on during PostRun when no driver brake apply Issue description :
Press brake pedal after key off until EMS_BRAKEPEDAL signal stop, then release brake pedal , ESC_BLREQUEST is aways reuqest to switch on brake light. Terry 20210801:
the ‘INPUT_VALID_BRAKE_PEDAL’ had updated to false in G59 2PP... | |
[APP][DIAG] Changan EPA2 | PV01-1st_SW_PURL2_RC1 | SYS5 | A diagnostic response is recevied with incorret length (not equal to fixed value 64 bytes) Activity Description:
With the outcome from W130j as Impact Analysis results on SWE1 per one clustered change from this release and one build, the change impacted feature... | [APP][DIAG] Changan EPA2 | PV01-1st_SW_PURL2_RC1 | SYS5 | A diagnostic response is recevied with incorret length (not equal to fixed value 64 bytes) Activity Description:
With the outcome from W130j as Impact Analysis results on SWE1 per one clustered change from this release and one build, the change impacted feature... | |
Copy from: GEELY_KX11_PV01|SYS4-5| TOS FIT- DEM_ASP_COLANG_MPS_WIDE_XCHECK_FAULT rising time is too long there is a Issue carry from KX11 to FX11 ,need to retest to Verify it on FX11 EPP ,details please refer OP: 5534032
Note: same FX11 EPP with task: 5945498, for better to check please set the thredhold value little... | Copy from: GEELY_KX11_PV01|SYS4-5| TOS FIT- DEM_ASP_COLANG_MPS_WIDE_XCHECK_FAULT rising time is too long there is a Issue carry from KX11 to FX11 ,need to retest to Verify it on FX11 EPP ,details please refer OP: 5534032
Note: same FX11 EPP with task: 5945498, for better to check please set the thredhold value little... | |
[Lotus_IBC_SE5.2_Fix] Esc active lamp <2021-07-22>Liu Hui:
----------------------------------------------------------------------------------------------------------------
Based on Geely req. 80674 v12 to check the conditions for output signal EscWarnIndcnReq
Based on Geely req. 89582 v8 to check the conditions for out... | [Lotus_IBC_SE5.2_Fix] Esc active lamp <2021-07-22>Liu Hui:
----------------------------------------------------------------------------------------------------------------
Based on Geely req. 80674 v12 to check the conditions for output signal EscWarnIndcnReq
Based on Geely req. 89582 v8 to check the conditions for out... | |
[MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SwAd Model regarding changes in attached interface sheet.
----------------------------------------------------------------... | [MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SwAd Model regarding changes in attached interface sheet.
----------------------------------------------------------------... | |
[MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | [MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | |
[MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | [MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | |
[MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type Integrate ARXML changes from CRs and connect the respective ports according to attached excel sheet. --------------------------------------------------------------------------------
Brief analysis summary:
------------------------------------... | [MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type Integrate ARXML changes from CRs and connect the respective ports according to attached excel sheet. --------------------------------------------------------------------------------
Brief analysis summary:
------------------------------------... | |
[MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | [MQB48W][ESC] Interface Request for Coupling Drivetrain device state and type '--------------------------------------------------------------------------------
Aim (Objective and Rationale):
Update SW Component according to provider and consumer interface changes.
-------------------------------------------------------... | |
[VW MQB48W][EBB] efficiency enhancement - residual pressure elimination (RPE) Residual pressure elimination (RPE) is requested to enhance efficiency of recuperation in MQB48W project. This feature requires adaptations in ESC and EBB. This OP is created to address the EBB changes, OP 5486614 was raised for modifications... | [VW MQB48W][EBB] efficiency enhancement - residual pressure elimination (RPE) Residual pressure elimination (RPE) is requested to enhance efficiency of recuperation in MQB48W project. This feature requires adaptations in ESC and EBB. This OP is created to address the EBB changes, OP 5486614 was raised for modifications... | |
[VW MQB48W][EBB] efficiency enhancement - residual pressure elimination (RPE) Residual pressure elimination (RPE) is requested to enhance efficiency of recuperation in MQB48W project. This feature requires adaptations in ESC and EBB. This OP is created to address the EBB changes, OP 5486614 was raised for modifications... | [VW MQB48W][EBB] efficiency enhancement - residual pressure elimination (RPE) Residual pressure elimination (RPE) is requested to enhance efficiency of recuperation in MQB48W project. This feature requires adaptations in ESC and EBB. This OP is created to address the EBB changes, OP 5486614 was raised for modifications... | |
[ASIL_C] Volvo SPA2 ASIL-C SW: EPS System sets {SteerDtcSet} to "NoYes1_Yes" for 1,5s when DTC is raised (P_MVI_DTC_SET_TIME is 100ms) Dummy CR. Dummy CR | [ASIL_C] Volvo SPA2 ASIL-C SW: EPS System sets {SteerDtcSet} to "NoYes1_Yes" for 1,5s when DTC is raised (P_MVI_DTC_SET_TIME is 100ms) Dummy CR. Dummy CR | |
Volvo SPA2 ASIL-C SW: GA02: {SteerLimpHomeIgnCntr} is constant as discussed during the Issue CCB, we have several OPs that are confirmed closed through some kind of validation, but that we cannot close formally, because of open child Change Requests.
We were discussing the following idea to get around this.
1. Move the... | Volvo SPA2 ASIL-C SW: GA02: {SteerLimpHomeIgnCntr} is constant as discussed during the Issue CCB, we have several OPs that are confirmed closed through some kind of validation, but that we cannot close formally, because of open child Change Requests.
We were discussing the following idea to get around this.
1. Move the... | |
LFK 580W Implementation / Kokusan Motor Support - C1 Sample Support Due to hardware design and performance issues the LFK 580W pump motor was reworked by the supplier.
The official available pump motor trim set must be updated to cover the new motor characteristic of the C1 design sample.
incl. VC1 SW: Step 2, AMSC a... | LFK 580W Implementation / Kokusan Motor Support - C1 Sample Support Due to hardware design and performance issues the LFK 580W pump motor was reworked by the supplier.
The official available pump motor trim set must be updated to cover the new motor characteristic of the C1 design sample.
incl. VC1 SW: Step 2, AMSC a... | |
[X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. Multiple WAVE II EBB C1 MQB ECUs are damaged at HIL. This needs to be investigated.
Previous communication available in AW_ _VW MQB48W EBB_ Defect ECUs in HIL-Testing (Bridge Driver Faults).msg in attachments.... | [X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. Multiple WAVE II EBB C1 MQB ECUs are damaged at HIL. This needs to be investigated.
Previous communication available in AW_ _VW MQB48W EBB_ Defect ECUs in HIL-Testing (Bridge Driver Faults).msg in attachments.... | |
[X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. Investiagation has shown ChassInf uses a different instance in VcInfo to save the HW version
than the one that was communicated. Implemented in SA via 4380107 was VcInfo[CHASS_VC_ECU_TYPE].
This has to be ch... | [X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. Investiagation has shown ChassInf uses a different instance in VcInfo to save the HW version
than the one that was communicated. Implemented in SA via 4380107 was VcInfo[CHASS_VC_ECU_TYPE].
This has to be ch... | |
[X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. BLTD has to be updated since it switched MOT_BD_INH_DRV unintentionally and by that turned the PowerFET on during startup BTLD phase, damaging the FETs and bypassing the precharge process.
This fix was already... | [X403][CAT2][TCS][VW_MQB_EBB][Failsafe]: KL30_M_SW_TURN_ON_ERROR & BD_BIST_FAULT Faults are seen additionally. BLTD has to be updated since it switched MOT_BD_INH_DRV unintentionally and by that turned the PowerFET on during startup BTLD phase, damaging the FETs and bypassing the precharge process.
This fix was already... | |
[VW MQB48-W ESC] [VW]HMS: No external park request possible Preconditions / Ausgangsituation:
SW SCS: 401_010
SW EBB:
Maneuver name: External ParkRequest
--------------------------------------------------------------------------------
Actions / Aktionen:
1. external Park request to HMS
--------------------------------... | [VW MQB48-W ESC] [VW]HMS: No external park request possible Preconditions / Ausgangsituation:
SW SCS: 401_010
SW EBB:
Maneuver name: External ParkRequest
--------------------------------------------------------------------------------
Actions / Aktionen:
1. external Park request to HMS
--------------------------------... | |
[VW MQB48-W ESC] [VW]HMS: No external park request possible Preconditions / Ausgangsituation:
SW SCS: 401_010
SW EBB:
Maneuver name: External ParkRequest
--------------------------------------------------------------------------------
Actions / Aktionen:
1. external Park request to HMS
--------------------------------... | [VW MQB48-W ESC] [VW]HMS: No external park request possible Preconditions / Ausgangsituation:
SW SCS: 401_010
SW EBB:
Maneuver name: External ParkRequest
--------------------------------------------------------------------------------
Actions / Aktionen:
1. external Park request to HMS
--------------------------------... | |
[VW KPM] DTC "Interne Störung" nach Spannungsimpuls Preconditions / Ausgangsituation:
VW 80.000 with I.D.BUZZ X653 SW
--> Checkpoint
*. MEB EBB Archive 1.516.1.10.1.45
E-07b Slow decrease and increase of supply voltage
--------------------------------------------------------------------------------
Expected Behavi... | [VW KPM] DTC "Interne Störung" nach Spannungsimpuls Preconditions / Ausgangsituation:
VW 80.000 with I.D.BUZZ X653 SW
--> Checkpoint
*. MEB EBB Archive 1.516.1.10.1.45
E-07b Slow decrease and increase of supply voltage
--------------------------------------------------------------------------------
Expected Behavi... | |
[VW KPM] DTC "Interne Störung" nach Spannungsimpuls retest for SW b623. Slow Decrease and increase of the voltage. This test was prepared by Andrej Hatwick for MQB and for debug test. Please repeat this test
-------------------------------
Preconditions / Ausgangsituation:
VW 80.000 with I.D.BUZZ X653 SW
--> Checkpoi... | [VW KPM] DTC "Interne Störung" nach Spannungsimpuls retest for SW b623. Slow Decrease and increase of the voltage. This test was prepared by Andrej Hatwick for MQB and for debug test. Please repeat this test
-------------------------------
Preconditions / Ausgangsituation:
VW 80.000 with I.D.BUZZ X653 SW
--> Checkpoi... | |
[Opel K0] [X300] [176][Vehicle] [Customer] Instrument is showing Brake Malfunctions (Warning Indicators ABS / ESP on and Popup “Fehler Bremsanlage”) after 3 seconds of engine running ECU:: B2 Sample Hybrid with EPB
Vehicle / Fahrzeug:: LC23 using VeSTo_CIAT_20201002_1027_PSA_K0_MY2023_L1_020 model version and Hybrid wi... | [Opel K0] [X300] [176][Vehicle] [Customer] Instrument is showing Brake Malfunctions (Warning Indicators ABS / ESP on and Popup “Fehler Bremsanlage”) after 3 seconds of engine running ECU:: B2 Sample Hybrid with EPB
Vehicle / Fahrzeug:: LC23 using VeSTo_CIAT_20201002_1027_PSA_K0_MY2023_L1_020 model version and Hybrid wi... | |
KX11_PP RC5_DEM_SAFET_PSU_V_STBY_FAILSAFE_FAULT_FSM Description and Software design are different This is only an intermediate CR to cluster all working packages same as the parent build requested but valid only for this release candidate build and this sigle change allocated. EPP upgrade | KX11_PP RC5_DEM_SAFET_PSU_V_STBY_FAILSAFE_FAULT_FSM Description and Software design are different This is only an intermediate CR to cluster all working packages same as the parent build requested but valid only for this release candidate build and this sigle change allocated. EPP upgrade | |
C1+ CV01 HW FIT test failure - C6126 s/c SWE.5 sub-CR to integrate Jan'22 EppAbstraction on top of BB02 SW.
Phase voltage diagnostics, lane manager and ILC fixes done during 2021 based on other C1 project feedback and few of the H-FIT issues are already fixed as part this latest EppAbs,
Linked relevant OPs to this CR... | C1+ CV01 HW FIT test failure - C6126 s/c SWE.5 sub-CR to integrate Jan'22 EppAbstraction on top of BB02 SW.
Phase voltage diagnostics, lane manager and ILC fixes done during 2021 based on other C1 project feedback and few of the H-FIT issues are already fixed as part this latest EppAbs,
Linked relevant OPs to this CR... | |
[ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_USAGE_MODE_QF is changing from "VALID" to "NOT VALID" in graeter time (about 370ms) then P_USAGE_MODE_FTTI (300ms) Dummy CR. Dummy CR | [ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_USAGE_MODE_QF is changing from "VALID" to "NOT VALID" in graeter time (about 370ms) then P_USAGE_MODE_FTTI (300ms) Dummy CR. Dummy CR | |
[ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_ASSIST_MODE_REQ_QF is changing from "VALID" to "NOT VALID" in greater time (about 387ms) then P_ASSIST_MODE_REQ_FTTI (300ms) Dummy CR. Dummy CR | [ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_ASSIST_MODE_REQ_QF is changing from "VALID" to "NOT VALID" in greater time (about 387ms) then P_ASSIST_MODE_REQ_FTTI (300ms) Dummy CR. Dummy CR | |
[ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_VEHICLE_BATTERY_VOLTAGE_QF is changing from "VALID" to "NOT VALID" in greater time (about 393ms) then P_VEHICLE_BATTERY_VOLTAGE_FTTI (300ms) Dummy CR. Dummy CR | [ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_VEHICLE_BATTERY_VOLTAGE_QF is changing from "VALID" to "NOT VALID" in greater time (about 393ms) then P_VEHICLE_BATTERY_VOLTAGE_FTTI (300ms) Dummy CR. Dummy CR | |
[ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_VEHICLE_BATTERY_VOLTAGE_QF is not changing from "VALID" to "NOT VALID" when {VehBatUSysU2ForSteer} is out of defined value ranged Dummy CR. Dummy CR | [ASIL_C] Volvo SPA2 ASIL-C SW: GA02: S_VEHICLE_BATTERY_VOLTAGE_QF is not changing from "VALID" to "NOT VALID" when {VehBatUSysU2ForSteer} is out of defined value ranged Dummy CR. Dummy CR | |
[Changan EPA2 PV AA01 S8] Flash failure of S1 from the AA01 S8 by means of MBFlasher The flashes of S1 from the AA01 S8 through CAN connectors by means of the MBFlasher were not always successful. The failures occurred several times at 51% of the flash process. The log files of the successful and the failing flashes ca... | [Changan EPA2 PV AA01 S8] Flash failure of S1 from the AA01 S8 by means of MBFlasher The flashes of S1 from the AA01 S8 through CAN connectors by means of the MBFlasher were not always successful. The failures occurred several times at 51% of the flash process. The log files of the successful and the failing flashes ca... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
[ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | [ECUAL] Gen2C to Gen2 Migration A “core platform 1” project has been created for a while, which covers all ECUAL related components, and later on for all IBC projects shall reuse or update checkpoints directly on the platform 1 project,This aims to limit branches and share improvement & bugfix from all projects, and it... | |
The resolution of Clampforce not correct during enter HU mode EPB-Shanghai-Jianfeng Yang[28.0.2021-12:00]
---------------------------------------------
preconditions:
Vechile static,Ignition On,Engine off,EPB released,Slope/gradient0
---------------------------------------------
Actions:
1.Enter HU mode
2.Hold the EPB... | The resolution of Clampforce not correct during enter HU mode EPB-Shanghai-Jianfeng Yang[28.0.2021-12:00]
---------------------------------------------
preconditions:
Vechile static,Ignition On,Engine off,EPB released,Slope/gradient0
---------------------------------------------
Actions:
1.Enter HU mode
2.Hold the EPB... | |
DMT Fault Degration Abnormal Brake Incoherent fault should not inhibit HTR function on the applied side, but the function is inhibited.
Pre condition:
------------------------------------------------
1. DiagBrake temp to 400 C, Apply EPB,use Diag request to Release Right side EPB PbcFault10 observed.
2. wait for 3 min... | DMT Fault Degration Abnormal Brake Incoherent fault should not inhibit HTR function on the applied side, but the function is inhibited.
Pre condition:
------------------------------------------------
1. DiagBrake temp to 400 C, Apply EPB,use Diag request to Release Right side EPB PbcFault10 observed.
2. wait for 3 min... | |
[PSW] To fix cpl_id value. local variable cpl_id is not assigned with initial value Changes are attached with CR | [PSW] To fix cpl_id value. local variable cpl_id is not assigned with initial value Changes are attached with CR | |
Geely 5b[System 5]: LDW still keep active not between P_LDW_TQ_HPTCWARN_FREQMAX (25Hz) and P_LDW_TQ_HPTCWARN_FREQMIN (15Hz) Summary description of problem:
Sample: According to test condition of BX11-SYS-R-LDW-23 in requirement of BX11-SYS-R-LDW-52, the system should [transition from LDW active state to LDW.TempFailur... | Geely 5b[System 5]: LDW still keep active not between P_LDW_TQ_HPTCWARN_FREQMAX (25Hz) and P_LDW_TQ_HPTCWARN_FREQMIN (15Hz) Summary description of problem:
Sample: According to test condition of BX11-SYS-R-LDW-23 in requirement of BX11-SYS-R-LDW-52, the system should [transition from LDW active state to LDW.TempFailur... | |
Geely 5b[System 5]: LDW still keep active not between P_LDW_TQ_HPTCWARN_FREQMAX (25Hz) and P_LDW_TQ_HPTCWARN_FREQMIN (15Hz) The OP 5464774 is supposed to be fixed by updating the system requirement (ALM_Task 5487713). Please update the TC accordingly and based on the existing logs verify if the TC can be set to PASS or... | Geely 5b[System 5]: LDW still keep active not between P_LDW_TQ_HPTCWARN_FREQMAX (25Hz) and P_LDW_TQ_HPTCWARN_FREQMIN (15Hz) The OP 5464774 is supposed to be fixed by updating the system requirement (ALM_Task 5487713). Please update the TC accordingly and based on the existing logs verify if the TC can be set to PASS or... | |
Geely 5b[System 5]: LDW will transition from LDW.active state to LDW.TemFailure in case ALAD_VibAmp exceed 1.2Nm (requirent is not exceed 3Nm) The OP 5464791 will be fixed in the SOP SW. Please re-test it with the LDW TC 148 Please attach the existing LDW regression test task to this CR | Geely 5b[System 5]: LDW will transition from LDW.active state to LDW.TemFailure in case ALAD_VibAmp exceed 1.2Nm (requirent is not exceed 3Nm) The OP 5464791 will be fixed in the SOP SW. Please re-test it with the LDW TC 148 Please attach the existing LDW regression test task to this CR | |
PbcOut.Clampforce sets 0 after carrying out diagnostic routine EPB-Shanghai-Jianfeng Yang[28.0.2021-12:00]
---------------------------------------------
preconditions:
Vechile static,Ignition On,Engine off,EPB released,Slope/gradient0
---------------------------------------------
Actions:
1.Set tester present by diagn... | PbcOut.Clampforce sets 0 after carrying out diagnostic routine EPB-Shanghai-Jianfeng Yang[28.0.2021-12:00]
---------------------------------------------
preconditions:
Vechile static,Ignition On,Engine off,EPB released,Slope/gradient0
---------------------------------------------
Actions:
1.Set tester present by diagn... | |
[QA][WR][X0401] Function Model Park Support Request Findings of Review Source : Function Model Review for component Park Support Request
Findings : Below are the findings related to the Function Model Review
Traceability between the Design Elements and Software Requirements not established. Please find below the l... | [QA][WR][X0401] Function Model Park Support Request Findings of Review Source : Function Model Review for component Park Support Request
Findings : Below are the findings related to the Function Model Review
Traceability between the Design Elements and Software Requirements not established. Please find below the l... | |
[FCA][SYS.5][PowerUpPowerDown test][FB03_0316] Executing the PowerDown cycle with reduction of powerdown time from 15Seconds to 7Secs with step down of 0.02Secs raised the interlane faults Integration of Tunes and Bug fixes not addressed in FB03
1. DaVinci configuration (including Rhapsody arxml generation).
2. Conf... | [FCA][SYS.5][PowerUpPowerDown test][FB03_0316] Executing the PowerDown cycle with reduction of powerdown time from 15Seconds to 7Secs with step down of 0.02Secs raised the interlane faults Integration of Tunes and Bug fixes not addressed in FB03
1. DaVinci configuration (including Rhapsody arxml generation).
2. Conf... | |
Define requiremnt for Broken wire detection failsafes for A100 PBM & SBM Requirement is needed for Broken wire detection failsafe. This requirement should be based on system failsafe analysis to list ADC channels that are not covered by higher level failsafes. In turn these channels will be configured in MCAL to set br... | Define requiremnt for Broken wire detection failsafes for A100 PBM & SBM Requirement is needed for Broken wire detection failsafe. This requirement should be based on system failsafe analysis to list ADC channels that are not covered by higher level failsafes. In turn these channels will be configured in MCAL to set br... | |
[VW KPM] mFDR - Charisma_DCC wird nicht korrekt übertragen CustApplikation need for the Feature mFDR new Interfaces
SignalInterface Implemented
ALR_Ist_ProzGetCommsAllWheelClutchValuealready implemented
TSL_Sperrgrad_LGetCommsTslSperrgradL has to be implemented according to the RxTx list
TSR_SperrgradGetCommsTsrSper... | [VW KPM] mFDR - Charisma_DCC wird nicht korrekt übertragen CustApplikation need for the Feature mFDR new Interfaces
SignalInterface Implemented
ALR_Ist_ProzGetCommsAllWheelClutchValuealready implemented
TSL_Sperrgrad_LGetCommsTslSperrgradL has to be implemented according to the RxTx list
TSR_SperrgradGetCommsTsrSper... | |
[VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert Please implement the following signals according customer requirements in Lastenheft "mFDR_SysLAH_48W".
MFDR_01_Sendestatus
MFDR_Active_DCC
MFDR_Kurvenrichtung
MFDR_UnterUebersteuern
MFDR_Sollfaktor_DCC_HL/HR/VL/VR
MFDR_Beschleunigung_yAchse
MFDR_DeltaKuppMom_Soll... | [VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert Please implement the following signals according customer requirements in Lastenheft "mFDR_SysLAH_48W".
MFDR_01_Sendestatus
MFDR_Active_DCC
MFDR_Kurvenrichtung
MFDR_UnterUebersteuern
MFDR_Sollfaktor_DCC_HL/HR/VL/VR
MFDR_Beschleunigung_yAchse
MFDR_DeltaKuppMom_Soll... | |
[VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert This test CR is created to block the KPM ticket status change to Realized before ZF test.
DO NOT REJECT THIS CR AS THIS CR WILL BE ATTACHED TO ALL THE KPM TICKETS; WHEN TEST IS DONE JUST REMOVE IT FROM TICKET: Retest is done with CR 5677968 and passed,
this CR... | [VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert This test CR is created to block the KPM ticket status change to Realized before ZF test.
DO NOT REJECT THIS CR AS THIS CR WILL BE ATTACHED TO ALL THE KPM TICKETS; WHEN TEST IS DONE JUST REMOVE IT FROM TICKET: Retest is done with CR 5677968 and passed,
this CR... | |
[VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert Previous CR 5546501 was rejected by mistake, therefore new CR created
This test CR is created to block the KPM ticket status change to Realized before ZF test.
DO NOT REJECT THIS CR AS THIS CR WILL BE ATTACHED TO ALL THE KPM TICKETS; WHEN TEST IS DONE JUST... | [VW KPM] mFDR-Kurvenricht.-Signal fehlerhaft auscodiert Previous CR 5546501 was rejected by mistake, therefore new CR created
This test CR is created to block the KPM ticket status change to Realized before ZF test.
DO NOT REJECT THIS CR AS THIS CR WILL BE ATTACHED TO ALL THE KPM TICKETS; WHEN TEST IS DONE JUST... | |
Update SSMPBi & HSBif interface Update SSMPBi & HSBif interface according to the GWM DE30 first delivery requirement. Update SSMPBi interface according to the GWM DE30 first delivery requirement. | Update SSMPBi & HSBif interface Update SSMPBi & HSBif interface according to the GWM DE30 first delivery requirement. Update SSMPBi interface according to the GWM DE30 first delivery requirement. | |
Update SSMPBi & HSBif interface Update HSBif interface according to the GWM DE30 first delivery requirement. HsbIf is implemented in PBC integration CR(5347832) | Update SSMPBi & HSBif interface Update HSBif interface according to the GWM DE30 first delivery requirement. HsbIf is implemented in PBC integration CR(5347832) | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 Aim :
Software Requirements for the following DIDs shall be implemented with this CR:
F18C- ECU Serial Number Data Identifier
F18B - ECU Manufacturing Date Data Identifier
F080 - Authentication Zone (ZA)
F011 - ECU Name (ECUNM)
D400 - Rear left wheel sp... | [OPEL K0][X300] : SW engineering process updates to fulfil level2 Aim :
Software Requirements for the following DIDs shall be implemented with this CR:
F18C- ECU Serial Number Data Identifier
F18B - ECU Manufacturing Date Data Identifier
F080 - Authentication Zone (ZA)
F011 - ECU Name (ECUNM)
D400 - Rear left wheel sp... | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 Aim (Objective and Rationale):
Create and add Functional and Technical Interfaces for the identified DIDs
--------------------------------------------------------------------------------
Details (Exact description):
According to the DID's mentioned in... | [OPEL K0][X300] : SW engineering process updates to fulfil level2 Aim (Objective and Rationale):
Create and add Functional and Technical Interfaces for the identified DIDs
--------------------------------------------------------------------------------
Details (Exact description):
According to the DID's mentioned in... | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE3 --------------------------------------------------------------------------------
Brief analysis summary:
-------------------------------------------------------------... | [OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE3 --------------------------------------------------------------------------------
Brief analysis summary:
-------------------------------------------------------------... | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE4 --------------------------------------------------------------------------------Brief analysis summary:
----------------------------------------------------------------... | [OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE4 --------------------------------------------------------------------------------Brief analysis summary:
----------------------------------------------------------------... | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE5 * Z0095496 Priyanka Nasika*
There are no inputs for this topic since long time.so, rejected the CR. | [OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE5 * Z0095496 Priyanka Nasika*
There are no inputs for this topic since long time.so, rejected the CR. | |
[OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE6
Scope of work includes:
1. Review and update test specifications2. Implementation of test cases .
3. Execution of test cases
4. Review
5. Reporting [Arun Kumar Valu... | [OPEL K0][X300] : SW engineering process updates to fulfil level2 This open point is created to track the SW engg process to acheive ASPICE L2 for SWE6
Scope of work includes:
1. Review and update test specifications2. Implementation of test cases .
3. Execution of test cases
4. Review
5. Reporting [Arun Kumar Valu... | |
[GM GEM][SystemTesting][EA00_prototype] - RES feature can not be activated Summary description of problem:
According to the System Requirement GEM-SYS-R-RES-155, 'The {EPS System} shall update the values of S_RES_POS_L IN USE and S_RES_POS_R_IN_USE during the mechanical end stop learning process.'
However, the RES en... | [GM GEM][SystemTesting][EA00_prototype] - RES feature can not be activated Summary description of problem:
According to the System Requirement GEM-SYS-R-RES-155, 'The {EPS System} shall update the values of S_RES_POS_L IN USE and S_RES_POS_R_IN_USE during the mechanical end stop learning process.'
However, the RES en... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.