id
stringlengths 7
9
| image
imagewidth (px) 6
702
| query
stringclasses 1
value | answers
stringlengths 40
100
|
|---|---|---|---|
train_0
|
What is described in this image?
|
lag [21]. First, the influence of cooling rate on structure formation was studied at subsequent heat
|
|
train_1
|
What is described in this image?
|
Figure 7. HaCaT cell growth on the electrospun PVA/PHB nanofibers mats with different blend composit
|
|
train_2
|
What is described in this image?
|
method, the total pore volume Vp is 0.564 cm3/g and an average pore radius rave = 5.0 nm. The inset
|
|
train_3
|
What is described in this image?
|
The quantitative TSM properties (Rr and Rr) for all the epoxy polymers are summarized in Table 2 and
|
|
train_4
|
What is described in this image?
|
It is known that physical ageing or crystallization can affect the barrier properties of polymeric m
|
|
train_5
|
What is described in this image?
|
Fig. 6(a) shows the XRD spectrum of pure CMC and pure PVA at ambient room temperature from 2° to 80°
|
|
train_6
|
What is described in this image?
|
This is shown by the dotted curve of the ACC component in Fig. 4. In Fig. 5(1)-(5), the ACC componen
|
|
train_7
|
What is described in this image?
|
stages of milling, flaky particles are also observed, and volume fraction of flaky particles continu
|
|
train_8
|
What is described in this image?
|
The reversing heat capacity for PET measured by the quasi-isothermal TMDSC on cooling from the melt
|
|
train_9
|
What is described in this image?
|
Fig. 5 The comparison of change in intensity of asymmetric S-N-S assigned as C-SO2-N bond manifests
|
|
train_10
|
What is described in this image?
|
Figure 2. Raman spectra of Fe2M03O12 at different temperatures. The Raman spectra of Y2M03O12 . xH2O
|
|
train_11
|
What is described in this image?
|
The glass transition temperature of the neat and MMMs were found by DSC to study the effect of the f
|
|
train_12
|
What is described in this image?
|
Fig. 6. SEM images of the fracture surface of PVA and PVA/graphene nanocomposite films. The fracture
|
|
train_13
|
What is described in this image?
|
For the calculation the measured points must be equidistant in time. In the Calisto software, it is
|
|
train_14
|
What is described in this image?
|
The thermal stability of the cured systems was investigated by TCA under nitrogen or air (Fig. 10) a
|
|
train_15
|
What is described in this image?
|
2. It is different from pure palmitic acid, solid-liquid phase transition presents two peaks at appr
|
|
train_16
|
What is described in this image?
|
The repeating unit of (I) is of mass 199 compared with 398 for (III). Oligomer spectra from these tw
|
|
train_17
|
What is described in this image?
|
We used a series of thermal treatments (Fig. 3) to demonstrate that melting and crystallization for
|
|
train_18
|
What is described in this image?
|
Fig. 4 Molecular mechanism of the quadruple-SME realized in PMMA/PEG(35) by using two gradient 7 , f
|
|
train_19
|
What is described in this image?
|
The tensile strength and Young's modulus of cured pure epoxy and its PNCs were investigated using a
|
|
train_20
|
What is described in this image?
|
The broadness of the glass transitions (ATg) Tgij, and Tg.c of poly(ST-random-nBA) and PS-block-PnBA
|
|
train_21
|
What is described in this image?
|
Three additional experiments were performed to study the photoinduced solid-to-liquid transitions. F
|
|
train_22
|
What is described in this image?
|
Various DSC protocols (Table 1) were used on the cod and tuna samples in order to detect different t
|
|
train_23
|
What is described in this image?
|
(TGA). Both studies were performed under a nitrogen atmosphere. The DSC trace and TGA thermogram are
|
|
train_24
|
What is described in this image?
|
In the environment with a water content higher than 50%, at the location of stripped coatings with
|
|
train_25
|
What is described in this image?
|
Figure 1. DSC thermograms of SessTe15_xPbx (x = 4, 6, 8 and 10) glasses at the heating rate of 20 K/
|
|
train_26
|
What is described in this image?
|
A shell-and-tube storage system is considered. It consists of one block made of graphite/salt materi
|
|
train_27
|
What is described in this image?
|
3.4.1. Circular dichroism spectroscopy Far UV-CD spectroscopy is executed to assess the changes in t
|
|
train_28
|
What is described in this image?
|
Fig. 5. Backscattered electron image of the bubble surface. other hand, the profile of 1a contains d
|
|
train_29
|
What is described in this image?
|
Fig. 4 shows the standard DSC heating traces for samples melt crystallized at different temperatures
|
|
train_30
|
What is described in this image?
|
PA, PES, PET and PU were derived from plastic packing materials, pellets and products. The purity of
|
|
train_31
|
What is described in this image?
|
Figure 1 | Phase transitions of ZIF-4 on heating. (a) Highlighting the rings and imidazolate linkage
|
|
train_32
|
What is described in this image?
|
Fig. 8 shows the results of specific modulus obtained for the samples of flax tapes. The specific mo
|
|
train_33
|
What is described in this image?
|
patterns. Fig. 5 shows the TR-XRD patterns of charged NCM and LP- NCM in the 20 range of 50–80°. Thi
|
|
train_34
|
What is described in this image?
|
A similar analysis was performed for the S-layer proteins of the studied L. kefir strains. Fig. 7 su
|
|
train_35
|
What is described in this image?
|
curves, above T , there is another endothermic peak, which could be attributed to the phase transiti
|
|
train_36
|
What is described in this image?
|
The TGA curves are presented in Figure 1 (parameters in Table SI, Supporting Information). The organ
|
|
train_37
|
What is described in this image?
|
(points B1-B5 in Figure 4), and the quadratic trend line was produced for them (Figure 4). (points B
|
|
train_38
|
What is described in this image?
|
Figure 8. (a) Local free-volume size v in propylene/ a-olefin copolymers catalyzed with zirconocene
|
|
train_39
|
What is described in this image?
|
As it can be seen in Fig. 4, the Netzsch and Mettler Toledo devices show unstable baselines. For the
|
|
train_40
|
What is described in this image?
|
Ozawa plots (Fig. 4) showing the relationship between In ß versus 1000/T can also be obtained using
|
|
train_41
|
What is described in this image?
|
The viscoelastic properties of PLA and the PLA/PCL blends were studied using DMA. A declining trend
|
|
train_42
|
What is described in this image?
|
Fig. 2 indicates the FT-IR spectra of pure blend and filled samples with different FL of BaTiO3. Fig
|
|
train_43
|
What is described in this image?
|
By homogenisation at 8000 rpm, all of the PCM-water mixtures were successfully emulsified. The avera
|
|
train_44
|
What is described in this image?
|
In order to study the electroluminescent characteristic and the effect of DDH layer thickness, the O
|
|
train_45
|
What is described in this image?
|
miscible polymer pair Thermal diffusion between two miscible polymers results in an interfacial phas
|
|
train_46
|
What is described in this image?
|
power compensation DSC 39 In heat flux DSC, which is used in the present research and its schematic
|
|
train_47
|
What is described in this image?
|
& Timm, 2012). DSC is a thermo-analytical technique that has been used for a long time to study the
|
|
train_48
|
What is described in this image?
|
The current and power efficiencies of the OLEDs are slightly related to the DDH layer thickness and
|
|
train_49
|
What is described in this image?
|
Figure 1. 1H NMR spectrum of CO, COSA, and ASCO. NMR spectra of CO, COSA, and ASCO are shown in Figu
|
|
train_50
|
What is described in this image?
|
To study the effects of cis content on Tg, PI samples with different cis contents were prepared by k
|
|
train_51
|
What is described in this image?
|
Here W1 and W2 are the mass fractions of the two polymers (in a binary mixture w1 + W2 = 1), Tg1 and
|
|
train_52
|
What is described in this image?
|
Fig. 3. Influence of T801 PPD on composition of wax precipitated from solution 1 at 15 ℃.
|
|
train_53
|
What is described in this image?
|
In order to study the electroluminescent characteristic and the effect of DDH layer thickness, the O
|
|
train_54
|
What is described in this image?
|
for bis(MI-npda) after each heating stage, as shown in Fig. 10. IR spectra indicate that the charact
|
|
train_55
|
What is described in this image?
|
Each Ca2+ cation coordinates four H2O molecules with mean Ca2+- O distance equals to 2.35 Å and four
|
|
train_56
|
What is described in this image?
|
Fig. 1 shows the X-ray diffraction patterns of as-prepared Sego -x Te20Znx (x = 2, 4, 6, 8 and 10) g
|
|
train_57
|
What is described in this image?
|
The DSC curve for [C4H5NH3]2SiF6 is presented in Fig. 1. It clearly exhibits two peaks which are loc
|
|
train_58
|
What is described in this image?
|
solution. Graphite was added during the preparation of cathode and anode to introduce the electronic
|
|
train_59
|
What is described in this image?
|
To examine the thermal events associated with the doped and undoped TiO2 powders, differential scann
|
|
train_60
|
What is described in this image?
|
(200) and (211) atomic planes in austenite. The major peak for the (110) austenite atomic plane was
|
|
train_61
|
What is described in this image?
|
respectively. Figure 12a and b present transition enthalpy and onset temperature (both melting and s
|
|
train_62
|
What is described in this image?
|
0.0017 wt.% H and balance Ti Table 1 lists the two groups of cylinders each 7 mm in diameter and 14
|
|
train_63
|
What is described in this image?
|
Figure 1 shows the heat capacity co of the sample liposomes as a function of temperature both withou
|
|
train_64
|
What is described in this image?
|
To analyze effects of the annealing temperature on enthalpy relaxation, bulk metallic glasses were a
|
|
train_65
|
What is described in this image?
|
The dependence of the crystallinity on the annealing time and the approximating curves for the studi
|
|
train_66
|
What is described in this image?
|
& is the vacuum permittivity, and C is the Curie-Weiss constant. Another feature of the temperature-
|
|
train_67
|
What is described in this image?
|
The results obtained from XRPD in combination with the TG/DTG and DSC analysis clearly identified GC
|
|
train_68
|
What is described in this image?
|
Then, graphene nanoplatelets were added to the melted sample based on the desired nano-PCM formulati
|
|
train_69
|
What is described in this image?
|
Fig. 17 Apparent specific heat capacity of the plaster with PCM addition-heating process Table 4 Res
|
|
train_70
|
What is described in this image?
|
functions as was shown in Figure 1.3752 The degree of the phase Figure 1. Examples of peak fitting a
|
|
train_71
|
What is described in this image?
|
Fig. 4. Effect of GLY concentration on the kinetics of drop volume (V) for edible films. The values
|
|
train_72
|
What is described in this image?
|
Fig. 2. FT-IR spectra of BP,, PMMA and micro-PCMs. 3. Results and discussion 3.1. Chemical structure
|
|
train_73
|
What is described in this image?
|
The authors discovered that a concentration of 10 wt% crosslinkers exhibited the best shape memory p
|
|
train_74
|
What is described in this image?
|
(LeMeste et al 1992). Starch (the main component of bread) exists as an amorphous or partially cryst
|
|
train_75
|
What is described in this image?
|
Figure 12 shows the temperature dependence on the E' for neat PP and its composites. The E' increase
|
|
train_76
|
What is described in this image?
|
The heat flow curves for a 125 nm thick polycarbonate film on Apiezon® grease are shown in Figure 1(
|
|
train_77
|
What is described in this image?
|
Figure 1. Chemical structure of N-methyl-N-propylpiperidinium Bis(trifluoromethyl sulfonyl) imide
|
|
train_78
|
What is described in this image?
|
TGA is used to estimate the thermal stability of the COPU-Si nanocomposite films as a function of si
|
|
train_79
|
What is described in this image?
|
If the structural entropy change of a continuous phase transition could be coupled to carrier transp
|
|
train_80
|
What is described in this image?
|
As shown in Fig. 3, the results obtained by visual observation indicate that binary systems are cate
|
|
train_81
|
What is described in this image?
|
The EDX local scanning was performed to investigate the surface elemental distribution of the microc
|
|
train_82
|
What is described in this image?
|
3.1.2 Effect of swelling on mechanical properties. Fig. 3 shows the temperature dependence of the st
|
|
train_83
|
What is described in this image?
|
To verify whether the trends observed for the present bitumens and related fractions are found in ot
|
|
train_84
|
What is described in this image?
|
Fig. 2(a) shows the temperature dependence of dielectric permittivity of the BHT bulk ceramics with
|
|
train_85
|
What is described in this image?
|
Figure 2. Temperatures of fusion Title as a function of the number of carbon atoms in the molecule:
|
|
train_86
|
What is described in this image?
|
A relaxation peak is clearly visible in the electric loss modulus M"(@) (orange symbols in Figure 4)
|
|
train_87
|
What is described in this image?
|
Fig. 1. Isothermal degradation of PHB. On the basis of the report from Hablot et al. (2008) the degr
|
|
train_88
|
What is described in this image?
|
and organistantinolosquaranten anto loraran matro tall organization and manas manas ministra masa ma
|
|
train_89
|
What is described in this image?
|
According to Eq. (4), a plot of ln[- ln(1 - α)] versus In β yield a straight line with slope equal t
|
|
train_90
|
What is described in this image?
|
The temperature dependence of dielectric permittivity & shows that the temperature of maximum value
|
|
train_91
|
What is described in this image?
|
Relaxation parameters Figure 1 shows the real (P = 20-200 s) and the imaginary Figure 2 shows the te
|
|
train_92
|
What is described in this image?
|
The as-cast Cu52.5Ti30Zr11.5Ni6 samples were determined, by XRD, to be fully amorphous, as shown in
|
|
train_93
|
What is described in this image?
|
The anomalous exothermal peak. Figure 1 shows the specific heat capacity, Cp, for two bulk metallic
|
|
train_94
|
What is described in this image?
|
°C. A thermocouple was embedded on the top surface of the sample, and annealing cycles were recorded
|
|
train_95
|
What is described in this image?
|
and DMA. 39 A number of studies have investigated P3HT:PCBM blends across the full composition range
|
|
train_96
|
What is described in this image?
|
Figure 2 shows a typical example. From the heat flow rate curves, as shown in Fig. 2, heat capacity,
|
|
train_97
|
What is described in this image?
|
Fig. 5. Melting temperatures and enthalpies of fatty acid based eutectic phase As evident from Fig.
|
|
train_98
|
What is described in this image?
|
(including polymers) have been clearly underlined [15-17]. Besides, the possibilities offered by the
|
|
train_99
|
What is described in this image?
|
Amorphous salicin was used as the model compound and subjected to the DSC thermal cycle illustrated
|
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 1