data stringlengths 14 24.3k |
|---|
Takmikill#0250: 100 and higher and i get video driver hung
Takmikill#0250: around the stable limit https://cdn.discordapp.com/attachments/305981966292090881/580439310658961424/unknown.png
Fitz#8200: F
Takmikill#0250: :ThinkCrash: it should be a decent chip
Takmikill#0250: it's 400A
Coleh#4297: Put an Accelero 4 or Morp... |
Takmikill#0250: at 3400 rpm i get around 74C
Takmikill#0250: so I could try that
Fitz#8200: is this a blower cooler?
Takmikill#0250: No, twin fan
Takmikill#0250: 2900 rpm is stock fan curve
Takmikill#0250: but 3400 is max
Takmikill#0250: Yeah, I'm in Witcher 3 and it's 76C at 3400 rpm
Takmikill#0250: https://cdn.disc... |
Diabolus#7512: https://cdn.discordapp.com/attachments/305981966292090881/580731056395649024/unknown.png
Coleh#4297: @Diabolus no but you should definetly get an overclock going
Coleh#4297: all AIBs/1070Ti's are locked to reference clocks which is like 400MHz~ off a bare minimum overclock
Diabolus#7512: Oh for sure, I ... |
Coleh#4297: where do your boost clocks go
Coleh#4297: it's possible your OC might be too aggresive
Diabolus#7512: Only pushing the i7-9700k to 4.9 ghz
Diabolus#7512: ram on base xmpp and even with 0 gpu oc still get crashes
Diabolus#7512: I believe it could be memory issue
Diabolus#7512: Still have the crashed only if ... |
Extreme_Blaxkor#7367: at idle/low load
Extreme_Blaxkor#7367: the memory clock on my 1080 is +800 because it didnt seem to show noticeable artifacts and is slightly better performing
Extreme_Blaxkor#7367: http://prntscr.com/ns4pkd
Extreme_Blaxkor#7367: would memory be more likely the cause of artifacts at idle and low l... |
Extreme_Blaxkor#7367: i think it loses performance after +200 but certain memory clocks seem to increase performance
Extreme_Blaxkor#7367: like 800 has higher performance than 850
Extreme_Blaxkor#7367: or +500 would have more than 550
Extreme_Blaxkor#7367: random spots on it
Extreme_Blaxkor#7367: it goes up and down as... |
Yokai#0318: Any recommendations for overclocking my gtx 1060?
Yokai#0318: Well I guess settings I should use that is.
4a61636b#5675: Different for every card, keep adding til you're stable
Extreme_Blaxkor#7367: i can do +1000 on memory but it does not increase performance and there are artifacts just its hard to notice... |
Fonola_#1391: Be patient and do -0.10mv until finding 100% stability
Jean Mi#0661: Ok thanks bro
Fealties#4650: I got to -150mv
Fealties#4650: 😃
Fealties#4650: Ok I’ll try the 399.xx drivers
Fealties#4650: Thanks fonolax
Fonola_#1391: 👌 🖖
Fealties#4650: i also heard that the 391 driver is really good
Deleted User#00... |
richiec77#9494: Unity brought up a good point that I haven't gone back to try/test out: the 4xx.xx is the newest CUDA driver set. Might be better for GPUPI
L456Tango64D#4361: Thank you!
L456Tango64D#4361: I got it from BSTOCK, $219
richiec77#9494: Same!
richiec77#9494: Got the 2nd one last week.
richiec77#9494: Much be... |
richiec77#9494: I did have issues where setting the Voltage controls needs to be done prior to pulling down
richiec77#9494: If you try and reboot using the Classified Tools for voltage control; the GDDR5 bugs out
L456Tango64D#4361: Classy voltage tool?
L456Tango64D#4361: Gotcha.
richiec77#9494: Yes. IIRC.....it's the 2... |
Deleted User#0000: wow, didn't understand anything lol
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/582138709277802509/unknown.png
Deleted User#0000: what should i bring up?
∫ntegral#0450: max out the power target
∫ntegral#0450: why'd you disable font smoothing
Deleted User#0000: why sh... |
∫ntegral#0450: there are many overclocking guides on youtube
Deleted User#0000: memory clock?
Deleted User#0000: and what should i do if it crashes? what is going to happend
∫ntegral#0450: core clock
∫ntegral#0450: scroll up a bit
∫ntegral#0450: if it crashes, just go back
Callista#3917: rather than having ur hand held... |
Coleh#4297: Or you can go the easy route. Download MSI Afterburner(uninstall ASUS GPUTweak since it's largely garbage whilst you're at it), unlock voltage control in the settings, max pwr and voltage, click the little magnifying glass icon and let it OC scan
Coleh#4297: Then press stress after it scans
Coleh#4297: If i... |
Coleh#4297: Manual is always superior
Diabolus#7512: How much research is there into driver versions determining performance?
Diabolus#7512: Do newer drivers always boost performance in games?
Diabolus#7512: Or are some, older drivers, more optimised for performance
Diabolus#7512: strange but interested
pkkshadow#5844:... |
ExtreemVin#1134: I was worried about it being degraded too but I’ve never gone over 1.2v for daily on it and it’s always been on water, I’ll try uninstalling the oc software, I used trixx most of the time
ExtreemVin#1134: The vrm is at 65-70C
ExtreemVin#1134: The block makes contact with it
pkkshadow#5844: what driver ... |
ExtreemVin#1134: That was the paste as well, I actually don’t have my 480 bios anymore, and my gpu isn’t recognized with the 480 bios but I can try again
ExtreemVin#1134: I’m gonna try older drivers as well as old trixx
pkkshadow#5844: https://www.techpowerup.com/vgabios/
pkkshadow#5844: try finding your bios here.
Rav... |
Betrayed#3582: BIOS limits you
Betrayed#3582: temps limit you
Resune#9806: I mean, can you still get reasonable overclocks out of it for daily?
Betrayed#3582: yes
Resune#9806: alright, thanks
Callista#3917: most of them seem to do ~2050-2150 without modding
Resune#9806: I'm looking at a $200 used gigabyte g1 gaming car... |
Fitz#8200: Last I checked, a 1060 had the pascal freq record because it has so little cores and is easier to bin than say a 1080 or ti
Betrayed#3582: Well when pushing for max freq its a little different
Betrayed#3582: The average person could just buy a better binned variant of whatever GPU they have
Betrayed#3582: It... |
pkkshadow#5844: it allows for higher clocks than most benchmarks.
4a61636b#5675: Max I can do on mem is +410
4a61636b#5675: Micron :/
4a61636b#5675: Clock somehow got 1235 out of my Fury-X in 3dmFS I think
Resune#9806: 2000mhz is the max i can do with my elpida mem on my 970
NuclearDebris#1984: @4a61636b that was my fu... |
Betrayed#3582: The physical die is fine
fayrez#8062: noticed only when repaste. Works fine now. Wondering if shuntmod and oc with liquid cooling can do something longterm if paste gets hardenend of smth like that. Cause it should be fine as long as i dont skimp on paste
Betrayed#3582: I wouldn't shunt mod
Betrayed#3582... |
fayrez#8062: What cooling you have?
Dataluxe#2032: I have the Gigabyte Wind force model. 3 fans on the card itself , with a fan curve set up. It hasn't exceeded 65 degrees at all
fayrez#8062: Dont rise voltage.
Dataluxe#2032: If that's what you mean by cooling
fayrez#8062: air cooling is ok. But dont rise volts
fayrez#... |
fayrez#8062: make logging or manual check of frametime consistency when mem oc.
fayrez#8062: Sometimes it hits stability limit before freq limit
Resune#9806: I wouldn't use heaven for game stable benchmark, firestrike and time spy are really good at letting you know if something is stable, I've found
Resune#9806: you c... |
Dataluxe#2032: it seems to be constantly spiking and dropping even now
Betrayed#3582: If you are bouncing off some limit dialing back your OC (or using the V/F graph) would help
Dataluxe#2032: V/F graph?
Deleted User#0000: I've been ocing the shit out of a 7870 recently but I noticed that when using cinebench r15 openg... |
Dataluxe#2032: alright, it seems like the power usage has stabilized after a few minutes
Dataluxe#2032: The issue was that Youtube+Wallpaper Engine as far as I can tell, but is it normal for that to spike usage up and down between 20 and 55%?
DustArma#5920: damn ffxiv really doesn't like memory overclocks
DustArma#5920... |
Fitz#8200: heaven and valley are like the aida64 stress test
Alcsi69#2059: I'd like to ask about some of the gpu benchmarks like 3dmarks... I don't know what platfrom should I choose for a gpu benchmarking rig (i dont have a loooot of money so 9900k and stuff like that are out for me right now), 'cause I read a lot of ... |
Betrayed#3582: Undervolt is generally an overclock since you still run higher clocks than that intended power state
Atomicpulsz#5888: gotcha
Atomicpulsz#5888: In a situation like this, would it be wise to lower clock speeds or raise mv?
Atomicpulsz#5888: @Betrayed
Betrayed#3582: Depends on your thermal headroom
Betraye... |
I just wanted that 3400 without having to change the BIOS or doing anything fancy :bzNotLikeThis:
Betrayed#3582: Clocks were between 2020-2060mhz it seems
Betrayed#3582: How did Clock get #2 at 1940mhz :bzLaughAtDeath:
NuclearDebris#1984: @Betrayed because boost was "1970", it did much higher than what gpuz said
Nuclea... |
buildzoid#6254: if it's a new card that also trips safety
4a61636b#5675: It's a 1070ti
Coleh#4297: oh, you can't shunt mod 2xxx series?
buildzoid#6254: if you short the shunt too much the card thinks the power reading is wrong and goes into safety mode
4a61636b#5675: It sounds like it's in a safety mode
fayrez#8062: an... |
Could be power limit or not enough voltage
boyo#4659: maybe im dumb but if the card is water cooled perhaps not enough thermal paste was applied
Sieff1#2081: hey can someone help me out
Sieff1#2081: I have an rtx 2080
Sieff1#2081: what is a modest core and memory clock
Sieff1#2081: i have a gigabyte gaming oc tri fan
∫... |
Deleted User#0000: i wanna up the core clock but i don't know what it can take and stuff. its a MSI geforce gaming trio 2080ti lol i was just wondering if it's okay. if you guys know. thanks and i hope someone gets back to me thanks for your time (=
Star#9999: I mean, you're on stock. You'll be able to push it up a dec... |
Star#9999: Don't just chuck sliders, follow that guide
Star#9999: Or another one
Star#9999: You won't do any damage as long as you're careful and patient
Star#9999: And aren't making HUGE leaps on any of the sliders
BoatyMicBoatFace#0800: you can max the top 3 sliders
BoatyMicBoatFace#0800: the auto oc will move the 4t... |
Star#9999: that i got a valid result on
Star#9999: unstable tho
Deleted User#0000: so.
Deleted User#0000: does that mean
Deleted User#0000: i crank first 3
BoatyMicBoatFace#0800: yes
Star#9999: Crank voltage, crank power limit
Star#9999: also turn off auto fan speed and set it to 100% while you're doing all this
Star#9... |
Star#9999: did you apply?
Star#9999: you have to hit the check
Deleted User#0000: yap
Star#9999: lol
Deleted User#0000: look
Star#9999: aight
Star#9999: yeah
Deleted User#0000: https://gyazo.com/c64c1597cbee118ed8c643763c356e39
Deleted User#0000: now what
Star#9999: >the guide
Star#9999: >that we linked
BoatyMicBoatFac... |
Deleted User#0000: U JUST RUN THE CORE CLOCK
Deleted User#0000: run a scanner
Deleted User#0000: up the core clock
Deleted User#0000: run a scanner
Star#9999: and make sure stability between pretty much everything
BoatyMicBoatFace#0800: no you run the scanner and it will find a max stable core clock setting
Star#9999: ... |
Deleted User#0000: i seriously wanted to get thiss orted
Deleted User#0000: my heart like
Deleted User#0000: stopped.
Deleted User#0000: 1500$
Deleted User#0000: i thought was in the drain
Deleted User#0000: 😂
Star#9999: lmao, it's kinda hard to SERIOUSLY mess up
Star#9999: like it's possible
Star#9999: if you're dumb... |
Star#9999: you're going to tweak it
Star#9999: a lot more
Deleted User#0000: o
Deleted User#0000: lol
Deleted User#0000: so i up the core clock a bit more?
Star#9999: Get it stable first
Star#9999: Then up it
Star#9999: Keep going until issues occure
Deleted User#0000: should i run a game
Deleted User#0000: and see fps... |
Deleted User#0000: each time
Deleted User#0000: till u see problems aiight
Star#9999: yup.
Deleted User#0000: alright.
Deleted User#0000: TO 3D MARK!
BoatyMicBoatFace#0800: like a freeze and the driver crashing
Star#9999: then you step it back, that's gonna be not stable either but then you do more intensive stress tes... |
Deleted User#0000: too scared.
Deleted User#0000: LOL
Deleted User#0000: i9 9900k z390 ace msi
Deleted User#0000: 2080ti
Deleted User#0000: 64 gigs of ram
Star#9999: like I said, I managed to squeeze out a +190/+1450 3dmark test on a 2070, which is pretty fucking at the top of the silicone lottery
Deleted User#0000: an... |
Star#9999: which i was proud of getting 144hz steady with the OC
Star#9999: Should I even bother undervolting my GPU?
Star#9999: Some poeple say it gives a performance boost
Star#9999: Temps aren't really an issue
Star#9999: I wish I could have something to auto-switch profiles, like I don't mind an overclock when I'm ... |
Deleted User#0000: @Star
Deleted User#0000: @BoatyMicBoatFace
Deleted User#0000: 63%
Deleted User#0000: at 150 Mhz
Callista#3917: this is some auto stability test thing?
Deleted User#0000: ya
Callista#3917: just do it manually lmfao?
Callista#3917: run some benchmarks
Callista#3917: see what clock speeds u start gettin... |
Star#9999: Set it to start on windows start-up, minimize on open, and minimize to tray
Star#9999: and you wont even notice it unless you have to pull it up @Deleted User
Star#9999: but yes, it has to stay open
Star#9999: in the tray at least
Deleted User#0000: kk.
Star#9999: aight fuck this i'm not undervolting my gpu... |
Star#9999: i'm doing the opposite, undervolting my gpu xD
Star#9999: uhm wait my 2070 is clocking at 1825-1890mhz
Star#9999: not OC'd
Star#9999: I don't think that's supposed to happen
Star#9999: ```
But clock speeds are significantly lower. The desktop card has a 1410 MHz base along with a 1620 MHz boost, which goes u... |
Deleted User#0000: so ive got my 1070 on +242 on stable
Deleted User#0000: and i need +255, all ive used is MSI afterburner so far, is there anything else i can do?
Betrayed#3582: new bios
Betrayed#3582: drop thermals
Deleted User#0000: oh, my thermals are good,
Deleted User#0000: how do i go about a new BIOS?
Betrayed... |
Betrayed#3582: You need one that will work with your card so have fun
Betrayed#3582: Find one that works with your card (google should help), download the tools to flash it, and flash it
Betrayed#3582: You might be able to tweak something in the nivdia control panel with quality settings you a slight boost
Deleted User... |
Deleted User#0000: anyway
Deleted User#0000: is there anything else i can do
Deleted User#0000: to get slightly higher performance
Betrayed#3582: memory
Deleted User#0000: im already at my highest stable memory clock
Betrayed#3582: then no
Deleted User#0000: heck
Betrayed#3582: unless you want to do hard mods
Cold#0382... |
DaGunzi#1241: because the boost algorithm is a bit more complex, keeping notes of the freq+voltage settings and the resulting load clocks is key here
Cold#0382: ok so my 1060 is being weird
Cold#0382: on the v/f curve i have 1.031v set to 2075mhz
Cold#0382: it runs at 2100
∫ntegral#0450: that's because the temperature ... |
NuclearDebris#1984: You could obtain a job
SlovenianSlobodan#9859: You could mine bitcoins
SlovenianSlobodan#9859: Xd
∫ntegral#0450: may as well beg your parents for money
Hasy#9024: hello, i got GV-N2070WF3-8GC, anyone got any good oc on it ? or should i leave it stock
pkkshadow#5844: oh lol
pkkshadow#5844: sorry abou... |
SlovenianSlobodan#9859: You can read that from the VBIOS using PolarisBiosEditor
DustArma#5920: 1340 and I guess the default voltage was 1150mV? I'd have to check when home
DustArma#5920: https://cdn.discordapp.com/attachments/305981966292090881/585164076704071690/unknown.png
Kim#9859: https://cdn.discordapp.com/atta... |
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/585364774326370334/unknown.png
∫ntegral#0450: look at the last 2 characters
∫ntegral#0450: 16/17/18
Kim#9859: that's really good then
Kim#9859: thank you 🙂
Fastfat#1597: Is the max “safe” voltage for intel he graphics the same as the cpu?
Fastfa... |
Michal#1899: So I'm overclocking my asus gtx 760, I managed to get my memory clock up to 7500mhz and 1210mhz on clock. They were done separately and I'm currently sitting at 1160mhz 7300mhz with both together.
Michal#1899: I realised the oc on the clock has better results than them together, should I use the oc with th... |
DZCreeper#6471: MSI Afterburner is fine. download the zip file, run the installer, don't bother with rivatuner which it also offers to install.
DZCreeper#6471: launch afterburner, go to the options and select the option to auto start with your OS.
fayrez#8062: Izebrra , "can i overclock a gtx 950 if u help me ill paypa... |
DustArma#5920: oh you were talking about fayrez
Callista#3917: you have w10?
Callista#3917: you should be able to see in task manager which processes are using GPU resources
DustArma#5920: task manager reports just 1~4% usage from DWM
DustArma#5920: while MSI afterburner and hwinfo report 100%
DustArma#5920: https://c... |
Callista#3917: id you have a game or something open before?
DustArma#5920: It was doing it while I was playing ubisoft's uno game with a friend
DustArma#5920: which normally doesn't push my GPU above 500MHz
DustArma#5920: it never did it before though
DustArma#5920: and before that I had just booted my system
Police Of... |
SlovenianSlobodan#9859: You will need to test that by yourself
SlovenianSlobodan#9859: Every chip is different
DustArma#5920: Highest stable core OC on my RX580 I've managed is 1450 with a +100mV offset
DustArma#5920: @יPiotrKFtwייߟا
DustArma#5920: Also trying to ping you on my phone made it change to RTL writing 🤔
יP... |
יPiotrKFtwייߟا#3700: crashed
Coleh#4297: back off the clocks
Coleh#4297: what's your stock stable when you leave core clock alone and let the pwr/voltage at max
DustArma#5920: But I wouldn't push it that high yet
Coleh#4297: yeah
יPiotrKFtwייߟا#3700: my card stock is 1411
Coleh#4297: just add 10-20MHz increments
DustAr... |
Coleh#4297: so you need to manually do it.
Coleh#4297: it probably wasn't
Coleh#4297: if you didn't stress or actually check
יPiotrKFtwייߟا#3700: it was i let furmark run for 2 hour
Coleh#4297: then it was probably never stable
Coleh#4297: furmark is NOT a gpu stability test
Coleh#4297: it just skyrockets your power co... |
Coleh#4297: stop when it crashes
Coleh#4297: either increase power/voltage if you haven't already
יPiotrKFtwייߟا#3700: 3D Mark demo
Coleh#4297: and then continue to increase core clocks
יPiotrKFtwייߟا#3700: i just set to max
Coleh#4297: Demo doesnt have stress test available
Coleh#4297: sometimes you power consumption ... |
Fitz#8200: Then run the timespy stress test
Fitz#8200: Runs it for 20 loops
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/586252581479776268/2.PNG
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/586252583908278286/Unbenannt.PNG
Deleted User#0000: is this goo... |
Deleted User#0000: 7324mhz memory
Deleted User#0000: any good ?
Fitz#8200: Furmark is trash because it throttles vrms
Fitz#8200: Use superposition or some 3dmark
ExtreemVin#1134: Or use a game that you’ll actually play to test it
Jamil#9447: https://cdn.discordapp.com/attachments/305981966292090881/586345159608762381/... |
Cold#0382: restarting doesnt do much
Cold#0382: not from what ive seen though
Cold#0382: I would run it just like +110 but it runs stable and >75 when it runs 2100@1.031v
Cold#0382: so idk
Fitz#8200: yeah idk either :/
Cold#0382: It stopped the fluctuations after the crashes
Cold#0382: so maybeeeee
Cold#0382: imma cras... |
Jamil#9447: Should I be worried ?
lord tachanka#2164: should be fine
Jamil#9447: Guys
Jamil#9447: When people say to find a stable overclock do they mean like games not crashing or the clock speed staying at a certain speed consistently?
Jamil#9447: Cause I can get plus 220 mhz on my core clock but it fluctuates alot
J... |
Callista#3917: maybe
Fitz#8200: https://cdn.discordapp.com/attachments/305981966292090881/586645910944219202/lmao.PNG
Kif_Kroker1729#0350: finally broke the 28k graphics score on firestrike turns out i had a second bios that gave me 45w more power
Deleted User#0000: nice
Kim#9859: just got this error after decreasing ... |
Kim#9859: i have the voltages at 1070 mv right now and it's still going up to 1150
Kim#9859: https://cdn.discordapp.com/attachments/305981966292090881/587050912988659714/unknown.png
DustArma#5920: I use afterburner and it UVs just fine
Kim#9859: i don't know if i'm doing anything wrong, i haven't done this before. i'v... |
Andrew#2443: Well hes to hoping It works
Betrayed#3582: is it liquid metal?
Betrayed#3582: or solder?
Betrayed#3582: Looks like liquid metal
adi769#6854: ~~... I never checked my 1070's shunts~~
Betrayed#3582: which wipes off
adi769#6854: it's as shiny as lm for sure
Andrew#2443: Looks like solder
Betrayed#3582: Its no... |
Andrew#2443: How do I get it off...
Betrayed#3582: If you don't want a shunt modded card due to power or thermals, etc
adi769#6854: I'd personally keep the lm on but idk how that'd affect longevity
Betrayed#3582: You can wipe it off
Betrayed#3582: Then use ISO to get rid of rest of it
Andrew#2443: Will it be fine if I ... |
Coleh#4297: I mean deb8ur has a permenant shunt modded card, or has had multiple but
Coleh#4297: he's an XOC so he knows what he's doing
Andrew#2443: Nah I want resale value to not tank so I will probably just take the lm off
Coleh#4297: for conventional use shunt mods are def not worth it
Betrayed#3582: der8auer would... |
Andrew#2443: He used lm on the die too
Betrayed#3582: oh yeah LM on a GPU isn't worth it
Andrew#2443: How do I do this without getting lm all over the card
Betrayed#3582: cotton bud or something
Andrew#2443: Also the card has hella condensation on it...
Betrayed#3582: Condensation or some oil that stained the pcb?
Andr... |
Betrayed#3582: It just forces the card into 2D clocks (safe mode)
Betrayed#3582: and it won't harm the card
Kim#9859: haha i'm an idiot
Kim#9859: i had frequency set to dynamic, which for some reason caused the voltage control not to work
Kim#9859: what's a good voltage for around 1400 MHz? like for just an average car... |
Fastfat#1597: @Maxwell Experience what is the average core overclock on a gtx970? I can’t get mine to pass any benchmarks at 1475mhz
Fastfat#1597: hmm, i guess i thought it should be higher then that, but hwbot says average overclock is 1423 on air. sorry forgot i could look there.
whiteshark#1560: 970 are known to hav... |
Nate *#1181: At what point would it be worth looking into a GPU cooler? I haven’t oced yet but I usually run 80c on full load
4a61636b#5675: What gpu?
Nate *#1181: 1070
Callista#3917: what kind of 1070?
Nate *#1181: 1070 sc 8gb
Nate *#1181: 08G-P4-5173-KR
Fitz#8200: evga?
Nate *#1181: Yes, NVIDIA GeForce Gtx 1070
Fitz#... |
Callista#3917: idk shouldnt be getting 80c on that unless there is something wrong with it
Callista#3917: i have a 1070ti with same cooler and it barely gets above 65c at the stock power limit
Nate *#1181: 63c right now with one round of R6, I'm using EVGA precision to measure temps
Nate *#1181: Should I use a differen... |
Callista#3917: does it take a long time to get those temps
Callista#3917: or do u get them in like 30s?
Nate *#1181: within an R6 round so 2minutes?
Nate *#1181: My CPU fan might be blowing in the wrong direction, I upgraded it on my own and I'm not an expert
Callista#3917: idk 63c in a round of siege doesnt sound too ... |
Callista#3917: i would contact evga
Nate *#1181: Could I set up my own with precision X1 or afterburner?
Fitz#8200: yeah
Nate *#1181: Alternatively, what about a new GPU heatsink/fans?
Fitz#8200: you shouldnt have to
Coleh#4297: should RMA before that
Fitz#8200: you'll hit bios power limits before anything with the sto... |
Nate *#1181: Both fans do spin
Nate *#1181: Is there a set time for RMA to be valid?
Coleh#4297: you need to be in warranty.
Coleh#4297: check your invoice/date of purchase and see if you're still applicable
Coleh#4297: even if you're not EVGA has pretty stellar customer service and may help you outside of your warrant... |
Nate *#1181: I'll stop by when I send the email
Coleh#4297: 👌
Nate *#1181: Hi,
I was looking into the temperature of my GPU and found that the fan curve was not adapting to the temperature of the card. An example was a fan curve of 23% at a temperature of 60C and also obtaining 80C while curving at 55%. I'm wondering... |
∫ntegral#0450: get a high power limit bios instead
∫ntegral#0450: the xoc bios for some reason, performs worse clock for clock
∫ntegral#0450: and it also allows up to 1.20v, which no one really knows is safe
∫ntegral#0450: https://www.overclock.net/forum/69-nvidia/1627212-how-flash-different-bios-your-1080-ti.html
Cole... |
𒐫꧅ဪ𒈙꧅꧅ဪ꧅𒈙꧅𒈙𒐫﷽꧅𒐫𒈙⸻𒐫﷽ဪဪ𒈙#8875: like 30 fps maby but it bugs me and im afraid my gpu might be degrading on me
Callista#3917: modern nvidia cards scale clocks with temperatures
𒐫꧅ဪ𒈙꧅꧅ဪ꧅𒈙꧅𒈙𒐫﷽꧅𒐫𒈙⸻𒐫﷽ဪဪ𒈙#8875: meaning i wont have any degredation
𒐫꧅ဪ𒈙꧅꧅ဪ꧅𒈙꧅𒈙𒐫﷽꧅𒐫𒈙⸻𒐫﷽ဪဪ𒈙#8875: but im not getting the mos... |
𒐫꧅ဪ𒈙꧅꧅ဪ꧅𒈙꧅𒈙𒐫﷽꧅𒐫𒈙⸻𒐫﷽ဪဪ𒈙#8875: your very helpfull thank you :D
𒐫꧅ဪ𒈙꧅꧅ဪ꧅𒈙꧅𒈙𒐫﷽꧅𒐫𒈙⸻𒐫﷽ဪဪ𒈙#8875: i manually changed the speed now so it stays at stable 65°C and is pretty quiet
Betrayed#3582: @Callista Doesn't the iGPU pull directly from vcore?
Callista#3917: no its a separate voltage rail
Betrayed#3582: huh... |
Battle Wolf#9465: but I'll see how much watts my PSU is consuming, I'm not going to see if the OPP or OCP are taking action, correct?
Betrayed#3582: If you go over 600w
Betrayed#3582: You will eventually trip OPP or OCP
Betrayed#3582: Probably hit OCP on 12v first before OPP
Betrayed#3582: but some PSUs are weird
build... |
Coleh#4297: @Nate * 100MHz each time
Coleh#4297: then when it begins to either artifact, perform worse or crash
Coleh#4297: back off by 50MHz or so
Nate *#1181: How accurate is perfcap reason?
Deleted User#0000: having a LOT of fun overclocking a Vega 56
Deleted User#0000: been so frustrated with Nvidia overclocking th... |
Fitz#8200: Read a guide?
LAMULE_TV#8935: Do you have that?
Callista#3917: i dont
Callista#3917: the internet might
Fitz#8200: Señor google might have a guide
MantequillaEpica#1943: alo, u know something about ocing?
MantequillaEpica#1943: i need advanced gpu overclocking
Fitz#8200: We know nothing
MantequillaEpica#1943... |
MantequillaEpica#1943: the question is: is it risky?safe?
MantequillaEpica#1943: i have modified the other parameters, but not coltage
MantequillaEpica#1943: *voltage
TruxRobJ#1911: what card?
MantequillaEpica#1943: gtx1060 asus rog strix OC 6 GB
TruxRobJ#1911: so, Pascal, if you can cool it crank the voltage slider al... |
Fitz#8200: Yeah, pascal is locked to safe voltage, so you have to physically modify the card to make it unsafe
MantequillaEpica#1943: lool
MantequillaEpica#1943: what i can modify that with the software gputweak
Fitz#8200: That's not physically being modified
Gerard Marsden#2511: What about Vega iGPU
Durenas#5640: what... |
∫ntegral#0450: improves bandwidth which improves performance
NuclearDebris#1984: 🤔
NuclearDebris#1984: Oh i misread that
NuclearDebris#1984: I need to sleep
4a61636b#5675: Thank you
4a61636b#5675: On a related note, is there a way to unlock my mem slider in afterburner?
יPiotrKFtwייߟا#3700: https://cdn.discordapp.com... |
MantequillaEpica#1943: with OCCT i can see cpu W, not gpu
MantequillaEpica#1943: ty btw!
ExtreemVin#1134: You could use software like hwinfo 64 and if you scroll down to the gpu sensors area it will show gpu power draw
יPiotrKFtwייߟا#3700: no error
ExtreemVin#1134: You might get better performance with tighter timings ... |
Callista#3917: and the other part is the perf benefit is just really small
Callista#3917: ~6-7% due to the memory causing diminishing returns
zhrooms#0659: if I'm playing Apex at 130 FPS, that extra 90MHz gets you up to 137 FPS
zhrooms#0659: that 7 FPS is not nothing
Callista#3917: ok that makes basically 0 differnce
C... |
zhrooms#0659: but you often are? sure maybe if you're running Metro with RTX at 45 FPS there's no point
Callista#3917: and if ur running variable refresh rate there is no perceptible difference when you change by 10 fps at ~130 fps
zhrooms#0659: fast sync only kicks in at 144 (cap)
zhrooms#0659: every other method is t... |
Callista#3917: its because of the desync
Callista#3917: between frame output
Callista#3917: and monitor refresh
zhrooms#0659: wtf you detect the rendering stutters through frametime
Callista#3917: 1 ur frame time consistency is going to be the same regardless of fps
Callista#3917: 2 perceived stutter is often independe... |
Callista#3917: the same as u go longer
Callista#3917: 35ms rendered frame time
Callista#3917: will become 50ms monitor frame time
Callista#3917: idk why u all at once dont have time to get into this xd
Nate *#1181: *So, it wouldn't be worth ocing a 1070?*
Gerard Marsden#2511: Is 200mhz on gpu core worth any significant... |
The Blackhat#5224: Is anyone aware of the max safe voltage for Ivy integrated graphics? As a daily/bench, but mostly daily. Can’t find much info on Google.
Deleted User#0000: Is this an average core clock for a 2080ti? I'm not sure what's a good and bad pick for clock speeds and this is the highest I can go without hav... |
riot#1543: Sry not really a monitor oc chat
Deleted User#0000: I doubt it
Deleted User#0000: But if you want to know then just try
Fastfat#1597: @deleted-role what is the max safe voltage for a gtx 460 on stock cooling? i bios modded it to allow up to 1.2v stock is around 1v.
Gerard Marsden#2511: https://cdn.discordap... |
Gerard Marsden#2511: Any game that gets lower fps when I max the anti aliasing should serve as a gpu stability/temperature/stress test?
maksim_k433c#5528: Hey, hey!
I've been lurking for a while about GTX 760/770 stuff and figured out that basically my Gigabyte GTX760 is a reflashed 770. But I haven't seen any successf... |
maksim_k433c#5528: So it doesn't make any sense to reflash it, I guess?
Cautilus#5912: yeah I would definitely avoid trying to flash a 770 bios onto your 760
maksim_k433c#5528: And since you're here, just curious - can I do something with an old Palit GTX 550 Ti?
Cautilus#5912: depends on what you mean by "do something... |
maksim_k433c#5528: Oh, and another one - how much are cpu dependent these Graphics benchmarks? I've got a weak CPU at the moment, so I'm worried a bit
Cautilus#5912: what is your CPU?
maksim_k433c#5528: For example, Cinebench opengl test is really CPU dependent
maksim_k433c#5528: For now it's Xeon E5450 at 4.0 GHz
Betr... |
maksim_k433c#5528: How can I try it?
maksim_k433c#5528: I have another card to flash it back in case of bricking it
Cautilus#5912: I'm fairly certain NVIDIA laser cuts their dies so there's no unlocking, so just don't try it
Betrayed#3582: doesn't kepler have custom bios
Cautilus#5912: yes you can bios mod kepler
Nucle... |
maksim_k433c#5528: Afterburner lets me change base clock, but there is no option to disable boost
Cautilus#5912: there's nothing wrong with GPU boost
Cautilus#5912: raising the power limit is just removing a potential limit for the core clock
Cautilus#5912: which allows the core clock to boost higher
Cautilus#5912: and... |
Cautilus#5912: or if you were using furmark that's also a no no
Betrayed#3582: Kinda looks like a crappy vrm
Gerard Marsden#2511: How did you end the fire
Betrayed#3582: Shut the system off?
maksim_k433c#5528: old Palit cards are crappy, yeah
and it was a furmark test
Betrayed#3582: :peepoSad2:
Cautilus#5912: well soun... |
maksim_k433c#5528: I thought that it's the heaviest GPU stress test, like Prime95 for CPU
maksim_k433c#5528: so if it's stable in furmark it should be stable everywhere
Betrayed#3582: Modern GPU throttle your clocks
Betrayed#3582: In furmark
Cautilus#5912: more like linpack for GPUs
Betrayed#3582: And older cards can't... |
maksim_k433c#5528: I think that even 1700 would be enough for my needs
I think I fell for unlocked multiplier and overclocking potential
Gerard Marsden#2511: 3Dmark's benchmark runs at low fps on my pc but the cpu doesnt get too hot. Games in general don't warm up the cpu much do they? Even the cpu-heavy ones
Cautilus#... |
Cautilus#5912: no it was CPU bound, 'cause the 7700K they tested it against averaged 246, you can see here for yourself
https://www.gamersnexus.net/images/media/2017/CPUs/7700k/144hz/overwatch-1080p-144hz.png
Cautilus#5912: but you can see the 1% & 0.1% lows are a fair bit lower on the 1700
maksim_k433c#5528: And that ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.