data stringlengths 14 24.3k |
|---|
anethema#0173: how can 1 and 0.1 % lows be below the minimum framerate
anethema#0173: I watched the bench, it never dropped to those at all.
Fitz#8200: load screens and such
anethema#0173: nah
anethema#0173: I started the bench at the exact same time in a demo each time
anethema#0173: either way, how is it even possibl... |
buildzoid#6254: should be fine
buildzoid#6254: also the voltage spikes I think are a software bug
Caliber#6659: got it, thanks
Gerard Marsden#2511: Does anybody have an opinion on how much to overclock a Vega 8 igpu?
DZCreeper#6471: don't rely on opinions when overclocking. realistically, you can get 1600-1700MHz depen... |
Callista#3917: no imean the soc stability
Callista#3917: cuz u want to run smt like 1.2-1.3 on the GPU
Gerard Marsden#2511: I ran 3dmark for 5min and it didn't crash and I spotted no glitches
akza07#0403: Can anyone tell me How A Undervolted Frq-Voltage Curve should Look like? https://cdn.discordapp.com/attachments/305... |
Betrayed#3582: ye you should be
Betrayed#3582: I would make the curve smoother on the lower voltages so its not going to have massive jumps in freq
akza07#0403: My laptop heats upto 100°C , which is now 73.
So when should I stop?
Betrayed#3582: When you are getting the performance you want
akza07#0403: So there is no ... |
Cold#0382: https://cdn.discordapp.com/attachments/305981966292090881/590937573489115146/unknown.png
Cold#0382: My fan goes to like 96% speed
adi769#6854: Has it got enough airflow and is it a decent cooler?
adi769#6854: also dust/repaste?
Cold#0382: https://cdn.discordapp.com/attachments/305981966292090881/5909380776... |
Cold#0382: Stock OC settings?
adi769#6854: well whatever the card ships with
Cold#0382: It runs 1987@1.043v
Cold#0382: Havent tested thermals in this case in a while tho
adi769#6854: well either way it may be worth undervolting and aiming for 1900-2000MHz with overclocked memory
adi769#6854: I'd test fully stock GPU te... |
Cold#0382: but all of them are either not nice to look at or arent white
Cold#0382: and im going for a white build
adi769#6854: the morpheus is rather neutral, and you could look for white fans
Betrayed#3582: 100% fan speed without a side panel lets my 1080 pulling like 250w only do like 25C above ambient
adi769#6854: ... |
Cold#0382: My fans sometimes rattle at 100%
Cold#0382: The fans on my card only go to about 3200RPM
Cold#0382: (according to GPU-Z)
Resune#9806: my 90mm fans on my 970 kind of have some vibrations around 2k rpm, and specifically in the range of 1950-2050rpm
Resune#9806: I don't think it's too uncommon
RealStickman#7420... |
Callista#3917: but in andromeda its nice to have a bit more clocks
Callista#3917: but honestly its still rly crap
Callista#3917: power up by 40% and noise goes nuts
Callista#3917: just to have 10% perf
Axel_Haestrod#2151: Does anyone here know about bifurcation? And how to check your mb for compatibility?
Fitz#8200: sh... |
4a61636b#5675: Doesn't x1 just suck?
Anionex#5831: can anyone tell me if this means 1.2v cause im confused lol, its my first time oc with bios https://cdn.discordapp.com/attachments/305981966292090881/591471230482382862/image0.jpg
TruxRobJ#1911: yes that means 1.2v
Anionex#5831: thanks lmao, sorry for being so dumb¿
Tr... |
Kim#9859: i might up the voltage but i can't find any info online about what the safe range is for memory voltage on these cards
RealStickman#7420: up to 1150mv
RealStickman#7420: do you get memory errors at stock?
Kim#9859: up the memory voltage to 1150?
Kim#9859: yes, just nowhere near as many
RealStickman#7420: nah,... |
Kim#9859: why's that?
Kim#9859: with the voltage i mean
RealStickman#7420: it's not actual memory voltage, but the memory controler voltage
RealStickman#7420: I don't really know why tho
Kim#9859: https://cdn.discordapp.com/attachments/305981966292090881/591638603558420480/unknown.png
Kim#9859: that's what the memory ... |
Kim#9859: i think i just need a fresh install of windows, this one is pretty messed up. i wonder if it's causing the isssues
Kim#9859: still no errors. no idea what's going on anymore. sorry if all this was for nothing, and i appreciate the help
RealStickman#7420: You should probably restart your pc more often. Most er... |
Meme#0420: ok and thats in afterburner?
Meme#0420: i was told i can go up to 1.2v
Coleh#4297: yeah
adi769#6854: Yeah, hit ctrl f
Coleh#4297: yeah the *bios* lets you go up there
Coleh#4297: whether or not that's actually safe in the long term is an unknown
Coleh#4297: i'd only go up to 1.2v when the card is like, 4 yea... |
Meme#0420: so say i wanna do 1150
Meme#0420: i raise the 1150 dot
Meme#0420: and thats a clock offset
Meme#0420: am i understanding?
Coleh#4297: yes
Coleh#4297: you keep raising the 1150 dot up the MHz until it crashes
Coleh#4297: i'd go straight for 2100MHz since you're on a WB, if you can keep GPU temps under 50c I t... |
Meme#0420: and do i have to touch the voltage offset slider?
adi769#6854: as long as it's supplying that voltage, there's no need
Meme#0420: so in a furmark its only going up to 1.08
adi769#6854: but on some stock BIOS pascal cards I've messed with it didn't hold the 1.093v without voltage and/or power limit raised
adi... |
∫ntegral#0450: bios mod
∫ntegral#0450: are you sure performance is increasing?
∫ntegral#0450: even 2150MHz is pretty high for polaris
4a61636b#5675: Not confident, 2250 Integral
∫ntegral#0450: yeah i know 2250MHz is the max
∫ntegral#0450: but most polaris gpus don't go much higher than 2150
4a61636b#5675: Would heaven ... |
4a61636b#5675: PBE timing tuner?
Valkrys#8394: That's the easiest method, yes
Fitz#8200: I cant find how to increase freq past 850mhz on an hd 6850. Afterburner and catalyst both max out at 850
pkkshadow#5844: trixx not working?
Fitz#8200: I havent tried anything other than after and cata
pkkshadow#5844: trixx might wo... |
Coleh#4297: you're not on a stock BIOS then?
Coleh#4297: it sounds as if what ever BIOS you've flashed on is not improving your clocks and is just outright unstable
Coleh#4297: BIOS flashing barring V56 to V64 almost never brings any real improvements at all honestly, not unless you're just chasing benchmark scores
Alc... |
💠NathanLithia💠#1928: b350 mobo
💠NathanLithia💠#1928: i reinstalled the Driver with DDU and things went back to normal
Morph#0609: Hi, I have the z390 asrock phantom gaming itx, if I would like to overclock the iGPU on my 9600K, do I have to put some heatsinks on the 2 bare ISL99227B power stages?
Merk#5248: Is it ev... |
Betrayed#3582: Heaven is super easy on modern GPUs
Betrayed#3582: So you can run way higher than stable clocks
Knauseriger Knackser#3918: isnt every 1080ti memory made by micron
Resune#9806: but even on my 970, heaven is too easy on it, I have to use firestrike or timespy
Knauseriger Knackser#3918: wait so you said inc... |
Resune#9806: uhh instability
Resune#9806: seeing colors you're not supposed to = bad
Knauseriger Knackser#3918: it works perfectly fine after
Knauseriger Knackser#3918: but it just freezes for 2 secs
Resune#9806: well, applying the settings? yeah it's kind of what my card does
Resune#9806: my screen kind of flashes and... |
Knauseriger Knackser#3918: it went down to 57 :)
Resune#9806: my gpu idles pretty high at 40C, 57C is pretty warm
Resune#9806: how hot is it under load?
Knauseriger Knackser#3918: i played league like 10 minutes ago
Resune#9806: it should've cooled down to normal within about 30 seconds
Knauseriger Knackser#3918: it go... |
Callista#3917: that should be like 20% gpu usage
Knauseriger Knackser#3918: idk https://cdn.discordapp.com/attachments/305981966292090881/592466680081285120/unknown.png
Knauseriger Knackser#3918: we at 50 now
Knauseriger Knackser#3918: i got no water cooling i got 6 fans
Resune#9806: on your gpu?
Knauseriger Knackser#3... |
Knauseriger Knackser#3918: meh
Knauseriger Knackser#3918: i just noticed that ive been chillin on a user creaed curve thats total bullshit
Knauseriger Knackser#3918: thats why its been so hot
Knauseriger Knackser#3918: my fans didnt activate until 50c
Knauseriger Knackser#3918: its cooling down rn
Knauseriger Knackser#... |
Knauseriger Knackser#3918: my pc is currently under construction so
Knauseriger Knackser#3918: its sitting open next to me
Knauseriger Knackser#3918: without a cover
Knauseriger Knackser#3918: yo while im waiting on that
Knauseriger Knackser#3918: how do i resolve perfcap reason vrel
Knauseriger Knackser#3918: is it th... |
Knauseriger Knackser#3918: kv
Betrayed#3582: so 2v :ohyeah:
Fitz#8200: if you can pump 2v into your gpu without modding it, you'll get a world record
Betrayed#3582: but yeah you can't kill a pascal gpu from software
Betrayed#3582: Unless your card supports the GALAX tool that unlock voltage
Betrayed#3582: but few do
Kn... |
Knauseriger Knackser#3918: without it being all weird
Betrayed#3582: it wouldn't work
Betrayed#3582: or do you mean 1000mhz not +1000
Knauseriger Knackser#3918: well yeah +1000 mhz
Knauseriger Knackser#3918: mhz +300 https://cdn.discordapp.com/attachments/305981966292090881/592469776882860051/unknown.png
Knauseriger Kn... |
Knauseriger Knackser#3918: isnt cpu overclocking more relevant
Knauseriger Knackser#3918: if ur able to fully control core voltage, you could just fry your card so
Knauseriger Knackser#3918: if u pull it up to 2 million
Knauseriger Knackser#3918: thats my guess
Knauseriger Knackser#3918: idk
Deleted User#0000: lmao my ... |
Resune#9806: but if you're working on it, it's best to keep it off until you find out what everything's super stable at
Knauseriger Knackser#3918: i see
Knauseriger Knackser#3918: so im sure yall remember the fiasco from ystrday
Resune#9806: it's just to avoid a situation where you have to boot into safe mode to stop a... |
Raudi Raccoon#6691: Interesting so performance all around improved drastically for my 1070 :meguthonk:
pkkshadow#5844: what's the voltage for ddr2 mem on a gpu?
pkkshadow#5844: google says it's 1.8v, just wanted to make sure.
DZCreeper#6471: yeah, GDDR2 uses the same 1.8V as actual DDR2 sticks. not very common though b... |
Resune#9806: might be hard to find that info
Betrayed#3582: well what card is it
Resune#9806: Zotac AMP! extreme core edition
Callista#3917: its same fets as FE 970/980
4a61636b#5675: Don't FE 980s die
Resune#9806: stock, this thing pulls 163W, I have it modded to do up to 200W, I just wanna know if I'm frying the vrms... |
Epic#1760: Ah ok
Resune#9806: Yeah I just need to figure out how much amps I can pump into my vrms before they start crying, stock bios for the zotac card allows for 163W power draw, I don't HAVE to run it above 163W, but allowing for 200W allows me to clock the card about 100mhz higher on average
Resune#9806: I just w... |
Callista#3917: which if you compare to the one you posted has a few more mosfet pads populated
Resune#9806: okay so it looks like it's R22 and R47 looking closer
Resune#9806: same as that 980 reference board
Callista#3917: its the same board, just slightly different components
Resune#9806: Yeah so I would assume this 9... |
Resune#9806: and tcase is the temperature of the casing of the vrm right? not the temperature inside the mosfet?
Callista#3917: ofc ur gonna drop something stupid like 10w off the package at 60a
Callista#3917: tcase is external temp
Resune#9806: I don't know exactly how hot my vrm's are getting but it does seem to have... |
Callista#3917: its 2 fan axial cooler right?
Resune#9806: 3x
Resune#9806: it's a big bitch
Callista#3917: and what airflow do you have on the back of the pcb?
Resune#9806: I have 1 fan below my gpu, a 120mm, and two 140's in the front of the case, no direct airflow at the back plate but I have lots of case airflow
Resu... |
I^2*r=P for resistive element. 75c tCase=1.3x 3mOhm Rds(on). totals 1.56W resistive losses
switching energy= charge*voltage, total gate charge is 50nC, 10v => 500nJ per cycle. 300 cycles per second => 0.15W (J/s=w)
1.7W*8=13.7W total low side losses```
Resune#9806: :cursedland: not really sure what to do with that i... |
Callista#3917: the gate has a fixed amount of charge, that charge is dissipated as heat every time you turn it on and off
Callista#3917: thats the switching energy component
Callista#3917: because the gate requires a certain amount of charge to activate
Callista#3917: it takes some time before the mosfet goes from off ... |
4a61636b#5675: Amd?
4a61636b#5675: What gpu?
Raudi Raccoon#6691: Unstable overclock
Raudi Raccoon#6691: Drop clocks some really. Back off 5-15mhz on core and maybe 50mhz memory
pkkshadow#5844: @Izebrra stop posting the same message in multiple channels. last warning.
riot#1543: im looking to flah the bios on my 1050 2g... |
riot#1543: i can show u something
kona#9246: And on a 1050 at ambient I don't think you have much if anything to gain
Betrayed#3582: 1050 has no external power
Betrayed#3582: so you are limited to 75w
kona#9246: Yeah, so don't bother
riot#1543: i can show u my overclock. Can u tell me what bios i should get i have a pi... |
riot#1543: -9 of what he already had
riot#1543: like less temps cause of a flashed bios
kona#9246: Oh, well that's likely because the other bios had lower voltage
kona#9246: Which means less overclocking
riot#1543: nah it had higher
riot#1543: :thonk:
riot#1543: it had higher voltages
Coleh#4297: well that's literally ... |
kona#9246: Okay dude, if you wanna OC on a 1050 you only choice is modding the cooler
riot#1543: is there no point in flashing?
kona#9246: Like putting a CPU cooler on the card or a water cooler to get like 50-150mhz more on core clocks
kona#9246: No point in flashing.
Coleh#4297: even on 1080Ti's the XOC BIOS gives yo... |
Coleh#4297: and if lucky enough, a higher boost than usual
riot#1543: what do you think
riot#1543: of that overclock
Coleh#4297: core offset doesn't mean anything.
Coleh#4297: the effective clock under load is what we want to see/know
riot#1543: what do u think
riot#1543: idk what u mean
riot#1543: i have 4.1ghz on my ... |
riot#1543: but ill experiment today
Coleh#4297: I can go as high as 850MHz on my 1080Ti but have backed off to 700 since i want to play it safe and avoid memory correction
riot#1543: i use 600 atm
riot#1543: but yh thanks for the info
Basic#6324: https://cdn.discordapp.com/attachments/305981966292090881/59356928669463... |
Deleted User#0000: Userbenchmark said my Vega 56 was in the 35 percentile. What gives?
∫ntegral#0450: try 3dmark
∫ntegral#0450: or superposition
Deleted User#0000: I got 20k graphics score on fire strike
Deleted User#0000: Idk how that compares to other Vega 56 users
Deleted User#0000: Does 3dmatk short percentiles?
De... |
💠NathanLithia💠#1928: yes but it only just noticed it
💠NathanLithia💠#1928: i reset my clocks and underclocked and its still present so im unsure
💠NathanLithia💠#1928: actually im going to try display this image on my laptop through HDMI to my monitor brb
💠NathanLithia💠#1928: the issue seems to be my monitor, neve... |
Izebrra#8146: cuz even his rx 570 was faulty
💠NathanLithia💠#1928: @DaGunzi or worse :P https://cdn.discordapp.com/attachments/427715195914289153/593835746130132992/20190628_014018.jpg
💠NathanLithia💠#1928: my issues was pixels dragging off to the side
DaGunzi#1241: yeah that doesnt look to healthy :LUL: well wishes ... |
Basic#6324: Im fine I just got a new case kinda wanna stress the rig. question though.
pkkshadow#5844: yeah?
Basic#6324: Is there a way to set MSI to v instead of mv
pkkshadow#5844: don't believe so.
Basic#6324: damn
Basic#6324: Anyone help with my overclocking?
RealStickman#7420: What's the problem?
Basic#6324: I uppe... |
Basic#6324: I achieved 1500
Basic#6324: But it artifacts
Basic#6324: So I turned the voltage back to normal, and it stopped
RealStickman#7420: That's interesting
Basic#6324: I'm at 1460 right now
RealStickman#7420: generally it's best if you raise core clock first and only raise vcore when it crashes
Basic#6324: It cra... |
RealStickman#7420: Binning wise
Izebrra#8146: everyone is upgrading there pc when I bet they only have a 144hz monitor and gets a rtx 2080ti for no reason
Izebrra#8146: i bet
Fitz#8200: my 1080ti only does bf5 at 130 fps 1080p 😦
Betrayed#3582: CPU limited
Betrayed#3582: my 1080 gets the same fps
Gerard Marsden#2511: h... |
Spring Wind#0430: I'm not seeing immediate artifacting during play, but this does crop up occasionally.
Spring Wind#0430: Normally when artifacting happens for me, it's the odd flicker of a blurry spot or a momentarily extended vertex.
Spring Wind#0430: I have, however, tried to be careful about all this. As opposed to... |
Spring Wind#0430: ...Oh
Spring Wind#0430: I'm a derp.
Spring Wind#0430: VRAM
Izebrra#8146: So yesterday i had a gtx 950 (WORKING FINE AND DETECTED ON PC) and i try install my rx 570 I put in my pc the fans were working and lights came out but when i go on device manager the graphic card wasnt there.. So nextd DAY I RES... |
Izebrra#8146: ACCedient
Izebrra#8146: I deleted it
Izebrra#8146: just realised
Izebrra#8146: lmao
snaakey#6969: lol
snaakey#6969: im so cool
Fever308#6969: all I could set on my evga gtx 1080 SC https://cdn.discordapp.com/attachments/305981966292090881/594254157511131147/unknown.png
Betrayed#3582: max the voltage slide... |
Fever308#6969: what gpu temp is considered how high you should go before no more room to OC?
Fitz#8200: you can max most gpus on the stock coolers
Fitz#8200: minus blower styles
Fever308#6969: yeh but like what temp? like mine runs at 75C rn during superposition
Fitz#8200: is that with an auto fan curve? You can always... |
Betrayed#3582: I would just adjust your fan curve
Gerard Marsden#2511: If a game is old and lightweight but gets below 50fps when I max out antialiasing, does it serve as a gpu stress test?
RealStickman#7420: @Izebrra I'm pretty sure that's the 3rd time I saw you asking here. Just stop!
tempname#1074: since i cant read... |
DaGunzi#1241: be sure to keep temps in check then
DaGunzi#1241: maybe try going in 10% steps if you have never increased it
DaGunzi#1241: just so you can watch the effect in hwinfo
Deleted User#0000: the increased power draw is making my card have coil whine
Deleted User#0000: the temps are absolutely fine
Deleted User... |
pkkshadow#5844: it at least charges phones, we know that much.
Crypt0C0wb0y#2578: legacy phones
pkkshadow#5844: ah
TruxRobJ#1911: you mean the USB-C? if so its' for VR
NuclearDebris#1984: He left the server
TruxRobJ#1911: nice...
Spring Wind#0430: OK, so a new bit of info in the "Spreading black blotches across the scr... |
Fitz#8200: Per the label, that's a usb port, and you can do quite a bit with usb
Crypt0C0wb0y#2578: maybe I should rephrase or get more specific
Crypt0C0wb0y#2578: Is anyone here using that micro-USB for anything currently?
Crypt0C0wb0y#2578: Like the ECU port on the GTX?
Crypt0C0wb0y#2578: maybe EC firmware update fun... |
Fever308#6969: OC: https://cdn.discordapp.com/attachments/305981966292090881/594760094005329921/unknown.png
Puiu#3495: hey guys, has anyone here tried undervolting the mobile version of GTX 1050?
4a61636b#5675: Doesn't seem difficult if afterburner gives you voltage control?
kostaxr#9448: how far can i get my rx 480 to... |
Callista#3917: and figure out how fast it is gonna go
kostaxr#9448: should i try 1380?
Callista#3917: idk?
kostaxr#9448: its not that big of a difference over stock tho
Callista#3917: ok
kostaxr#9448: its an increase of 38mhz
kostaxr#9448: xd
Callista#3917: ok
Ryan#0905: instead of OC why not undervolt instead ? bette... |
Deleted User#0000: @keeph8n talking about this one right? https://cdn.discordapp.com/attachments/305981966292090881/595225799473364992/Screenshot_20190626-203825_Facebook.jpg
Deleted User#0000: I need better pics damnit :blobpic:
Deleted User#0000: By the looks of it, it seems its connected to a reader but seems theres... |
*but* that isn't certain for it to even work
Hasy#9024: Is 180 core clock ok for RTX Gigabyte Aorus decent ?
Hasy#9024: Seems pretty stable I hit 2020
Hasy#9024: I'm not sure if I should go higher
Fitz#8200: 2020 is pretty low for turing
Deleted User#0000: Can a GPU overclock cause crash to desktop on games?
Resune#9... |
Scores
+60 2834
+70 2939
+80 2968
+90 2967
+100 2968
My settings :
https://i.imgur.com/dVKIS9B.png
GPU max temp has been 77.
Deleted User#0000: Whereas this is more like just crashing at the end of a loading screen
Deleted User#0000: Can OC cpu also cause games to CTD, or is it much more likely to crash the comp?
Resun... |
rdL#1259: nope
Resune#9806: are your GPU utilizations staying maxed?
rdL#1259: i guess not
rdL#1259: https://i.imgur.com/K5t2YxF.png
rdL#1259: What can i do about that?
Coleh#4297: keep pushing your GPU core clock
Coleh#4297: until you hit a specific limiter your GPU can essentially go faster
Coleh#4297: *usually*
rdL#... |
Coleh#4297: push your core clock as far as it goes, when it crashes back down and test for stability
Coleh#4297: once you know your core clock is stable go to memory clock
rdL#1259: alright. Once i get those 2 stable in heavens. Lets say I start playing a game but crash, where would I start lowering from?
Coleh#4297: y... |
Deleted User#0000: Is 7% increased clock over stock with Vega 56 UV/OC decent?
Hasy#9024: 2040 mem clock 77 c , gigabyte 2070 aorus
Hasy#9024: seems stable, everything more than that it crashes
Deleted User#0000: thinking of buying a R9 380 to fuck with
Deleted User#0000: they're £50 for a 2gb model from cex
Skiptrac... |
Gerard Marsden#2511: Vega 8 at 1100mhz is not stable with 1.1v, only with 1.125v
mushi#7905: a bit offtopic, but freesync works on a gtx 1650 card?
Resune#9806: pretty certain all cards after maxwell are freesync compatible
Coleh#4297: ^
mushi#7905: even 1030 ? 😛
mushi#7905: i thought it was >= 1060 only
Resune#9806: ... |
Callista#3917: idk what gen, but on haswell i've found there is some interaction of stability between the core and igpu
Callista#3917: if you load the core too much the igpu can become unstable
Callista#3917: same vice versa
Callista#3917: so you might have to do some balancing
Therius#0899: what should i use to test s... |
Resune#9806: that would be due to a core instability
∫ntegral#0450: if you didn't crash at stock, then it's your oc
Guy#4670: I see, thanks. Is there any way to increase stability other than dialling back the OC?
∫ntegral#0450: more voltage
Guy#4670: I am at +25% currently. kinda scared to go over
Fitz#8200: if on nvid... |
Guy#4670: and normalise all data
pkkshadow#5844: and you can look at the postings on their website or hwbot.
Guy#4670: I'll check now thank you
∫ntegral#0450: the score is proportional to the min, avg, max fps
pkkshadow#5844: ^
∫ntegral#0450: so lower settings = higher fps = higher score
∫ntegral#0450: if you want to c... |
Guy#4670: I ran it and got a 6065
Extreme_Blaxkor#7367: what does pascal like to top out at with core clock
Extreme_Blaxkor#7367: im getting around 2300 1.16v with a chiller set to 20c on thermostat
Extreme_Blaxkor#7367: 35 load temp
Extreme_Blaxkor#7367: on a gtx 1080
Extreme_Blaxkor#7367: i thought i read 2150-2200 w... |
https://i.imgur.com/X3oBN73.png
rdL#1259: at all?
rdL#1259: directx11
pkkshadow#5844: maybe. ff games have been picky with ocs for me.
Betrayed#3582: @rdL generally graphical API issues are entirely GPU
Gerard Marsden#2511: If I set vgfx voltage to 1.3v and vsoc to 1.1v, it wouldn't be bad since it will stay at 1.1 unl... |
Betrayed#3582: might have to enable advanced tweaks or something
Scurn#0001: ok
Betrayed#3582: Also max the voltage
Betrayed#3582: so you can use the 1.09v boost
Scurn#0001: ok
Betrayed#3582: It depends on how much effort you want to put into it
Scurn#0001: idc i just want to get at least +10 fps
Betrayed#3582: You pro... |
Betrayed#3582: click the little button to the left of the core clocks label
Alcyone#2233: https://cdn.discordapp.com/attachments/337235779384508417/527202211428696076/unknown.png
Im using precision X but it should look something like this, ctrl+f on the main gui opens the curve in AB
Betrayed#3582: its three or four b... |
Betrayed#3582: then flatten the curve after it
Betrayed#3582: It'll probably be 1.06v for the best results
Scurn#0001: will it bluescreen when i hti the highest voltage?
Scurn#0001: ok
Alcyone#2233: 1.093 is the max vgpu, raising the sliders in curve is the frequency offset
Alcyone#2233: left to right is voltage bottom... |
Scurn#0001: im learning, people in ltt server couldn't help me with this stuff lol
Scurn#0001: one sec, setting the vf curve
Scurn#0001: is this curve good? https://cdn.discordapp.com/attachments/305981966292090881/596458943908413470/unknown.png
Betrayed#3582: You have to make it flat after the freq you want, I wouldn'... |
Scurn#0001: alright
Betrayed#3582: Try like superpostion 1080p extreme
Scurn#0001: unigine?
Betrayed#3582: Repeat the increasing memory freq until your score goes down then try like +25
Betrayed#3582: uh idk who makes it
Scurn#0001: ok
Scurn#0001: ye it's unigine
Betrayed#3582: Memory has a sweet spot generally on Pasc... |
Scurn#0001: anything else? superposition is taking super long fsr
Scurn#0001: is valley good enough?
Betrayed#3582: ¯\_(ツ)_/¯
Betrayed#3582: I only use superpostion really
Scurn#0001: alright, ik heaven does let unstable ones pass, it did that to me a few times, it's the only one i have lol
Scurn#0001: wait im stupid i... |
???
profit
Extreme_Blaxkor#7367: https://cdn.discordapp.com/attachments/305981966292090881/596498257484709888/unknown.png
Extreme_Blaxkor#7367: dragging the points at the top of the curve into a flat line to determine what voltage/clock it wants to boost to
Extreme_Blaxkor#7367: its annoying because i will drag them t... |
∫ntegral#0450: sure why not
Extreme_Blaxkor#7367: im testing the card with my chiller at 15-20c before i hook up the cpu block and everything
Extreme_Blaxkor#7367: once everything is finished it will be around -15 to -20c or should atleast
Extreme_Blaxkor#7367: atleast the gpu the temps are alot closer to fluid temp an... |
Hasy#9024: How much it matters the memory clock ?
Hasy#9024: I managed to get +1000 on 2070 and it's stable
Hasy#9024: +220 core clock - stable too
Hasy#9024: might go higher but i'm afraid to fry it
Resune#9806: how much does mem OC matter for a gpu? depends on the game, some will like it more than others, but just te... |
Hasy#9024: I can hit a bit up, but it's unstable, will crash on benchmark
Hasy#9024: I crashed with 1300 memory clock
Hasy#9024: but with 1000 i'm perfectly stable
buildzoid#6254: literally just luck for the most part
Hasy#9024: so if I add more volts won't matter ?
Hasy#9024: I wanna put this card to the limit
Fitz#82... |
Hasy#9024: +220 core, +1100 mem
Hasy#9024: with or without voltage
Cold#0382: I feel like my 1060 clocks really low
Cold#0382: can only get +100
Betrayed#3582: +220 means nothing
Betrayed#3582: that could be 2000mhz
Betrayed#3582: or 2100mhz
∫ntegral#0450: @Riftmark https://forums.guru3d.com/threads/overdriventool-tool... |
Riftmark#4047: Sorry if I'm being dumb
∫ntegral#0450: well, just dump your current v56 bios with gpu-z
∫ntegral#0450: right click the title bar of odnt and hit pptable editor
∫ntegral#0450: then just open your bios
∫ntegral#0450: edit as you like
∫ntegral#0450: save to reg file
∫ntegral#0450: then just double click the... |
Alcyone#2233: hes pointing at a previous gen card on the floor, they just cropped it out
mi3night#2562: 1.32v fail
jacksonb2021#3334: im trying to overclock my gpu with haven 4 but i dont know what settings i should set haven to
Cold#0382: What card
Cold#0382: Either way you should set it to at least high settings'
Col... |
Cold#0382: I can run 2114 on core and 4498 on mem with my 1060
Cold#0382: 2114 @ 1.025v
Cold#0382: Micron mem
Cold#0382: :/
TheRBdrifter#8240: only early revisions were samsung
Cold#0382: Yeah, i got it for christmas like 2 years ago
Cold#0382: so not very early
4a61636b#5675: Micron sucks, can relate
Cold#0382: Still ... |
∫ntegral#0450: running a stress test to make sure everything is ok
rdL#1259: Can raising memory clock eventually give worse returns? i.e +300 mem clock score 2000 on unigine. +500 mem clock score 1950 on unigine.
4a61636b#5675: Yes
Betrayed#3582: It starts to error out
4a61636b#5675: A prime example would be that my 57... |
Scotland#7294: to do that
4a61636b#5675: afaik oc scanner only does core
Scotland#7294: exactly
4a61636b#5675: You take the memory slider, and you slide it
4a61636b#5675: if it crashes you go down
Scotland#7294: ok
Scotland#7294: D:
Scotland#7294: what would you reccomend for a 2080
Betrayed#3582: or if you get lower p... |
Betrayed#3582: it just won't
Betrayed#3582: Start at 0, run a benchmark
Betrayed#3582: increase by 100, run said benchmark again
Betrayed#3582: increase until score drops
Betrayed#3582: Then drop by 50 and fine tune more
Scotland#7294: what benchmark do you reccomend
Betrayed#3582: superposition worked well for me
Betr... |
Deleted User#0000: GTX 1070 OC please
Deleted User#0000: Not 1070ti
Deleted User#0000: 1070
Betrayed#3582: they are overclock the same
Deleted User#0000: Okay can you send me an OC
Deleted User#0000: ?
Betrayed#3582: its not that simple
Deleted User#0000: I did that for my old Graphics card and worked fine
Deleted User... |
loocool2#8294: I have 2 8 pins in rn
loocool2#8294: I have a dedicated 400w psu toward the gpu and I wanna see how far I can push it
Fastfat#1597: each 8 pin is rated to 150 watts, but can easily handle more from what i remember, so you should be good with 2.
Fastfat#1597: plus 75w from the pcie slot
loocool2#8294: a... |
∫ntegral#0450: did you actually change the power limit?
∫ntegral#0450: try setting it odnt
loocool2#8294: odnt?
∫ntegral#0450: overdriventool
loocool2#8294: I set the max power limit in pptable again, then changed the power limit there too. still only consuming 250ish watts using superposition (got 4086, but it's a ext... |
buildzoid#6254: yeah but they are faster per clock
buildzoid#6254: in some benches
Synchronus#4941: Does it matter in Heaven, 3DM11, or Firestrike?
Synchronus#4941: Mostly heaven because 6700K
buildzoid#6254: I don't keep track that much
buildzoid#6254: I think firestrike likes the latest drivers
Synchronus#4941: Cool.... |
saylae#7029: Also I'm talking about modifying powerplay tables and such too
∫ntegral#0450: if you have the money sure
Betrayed#3582: Do you already have water cooling gear?
DZCreeper#6471: could always just AIO the card if not. major benefit of HBM is only the VRM needs external cooling, and Vega cards have a ton of ph... |
MRschmeckles#6319: seems to be stable at 2050mhz(+32), 5455 mem(+450) and staying under 67c
Synchronus#4941: Eh, not particularly amazing, but it's not bad
Synchronus#4941: Is that benchmark stable in heaven?
MRschmeckles#6319: 2100 is close to the limit no? mem can go higher maybe?
MRschmeckles#6319: stable in heaven... |
MRschmeckles#6319: downloading it now. havent messed with ram oc, and ive got some more room in the ryzen, but for 4.1+ i need to start messing with LLC and vdroop, its a 1st build so going slow lol
Synchronus#4941: That's definitely okay, I really like the 2600. Doesn't do too much when really cold, but it's solid as ... |
MRschmeckles#6319: i think its just not comparing similar cards, when searching i cant find a "ftw" or "ftw2" card on leaderboards, but going filtering by "evga 1080 8gb" its a top 10 card
MRschmeckles#6319: im doing something wrong
Fitz#8200: https://hwbot.org/hardware/videocard/geforce_gtx_1080/ sort by stock cooler
... |
MRschmeckles#6319: its an evga ftw2 icx
Fitz#8200: yeah, beefy cooler. Maxed fan speeds or not yet?
MRschmeckles#6319: running max fans rn, hold on
Fitz#8200: can probably get 5c off that temp
MRschmeckles#6319: so i turnex fans on max and score went way up i think
MRschmeckles#6319: this was on +35 core and +500 mem ... |
rozdog#0730: should i try to push it further?
rozdog#0730: my core clock is at its limits at +225MHz
rozdog#0730: my voltage is +12mV
rozdog#0730: my current clocks
rozdog#0730: Core Clock : 1518MHz
Memory Clock : 3400 MHz
rozdog#0730: unigine just crashed
rozdog#0730: im gonna lower it down a bit
rozdog#0730: yeah i t... |
Fitz#8200: yeah
mushi#7905: bought a couple of fans for intake, made no difference in temps (before i only had 2 case fans, all outtake)
Fitz#8200: blower coolers have such a small heatsink that they need to be completely saturated to actually cool anything, since you need differences between the air temp and surface a... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.