data stringlengths 14 24.3k |
|---|
Pawblobestdoge#6196: Do the 2080 ftw air cooled cards clock the same? The ultra is $200 more
Pawblobestdoge#6196: 2080 ti*
Resune#9806: @NKN for a 1070? 3D mark is much better
Resune#9806: Heaven doesn't do that good of a job stressing the GPU as much as it should
Duke_Shambles#3805: I gave up on stress testing with be... |
NKN#4256: Hmm I'll go ahead and do that. I did the OC scanner / tester as well just to try
NKN#4256: said my limiting factor is power
Deleted User#0000: yeah 3dmark isn't that good in 2019
Resune#9806: not at all what I was saying
Resune#9806: a single benchmark isn't going to tell you if you're going to be stable aft... |
Matthew#3854: i mean yea i wasnt expecting huge ocs with no external power
Matthew#3854: i dont know
R0211#6041: Is that stable?
Matthew#3854: yes
R0211#6041: That doesnt look right
R0211#6041: 800 mem?
Matthew#3854: yes
Matthew#3854: running heaven right now
Matthew#3854: it crashed at 1000+ on mem
R0211#6041: Well sh... |
Matthew#3854: is that on water or?
NuclearDebris#1984: Thats subzero
Matthew#3854: ah
NuclearDebris#1984: So not daily
Matthew#3854: makes sense
Matthew#3854: been running this daily for a couple weeks
Matthew#3854: well actually my mem was at 650
Matthew#3854: got it to go higher today
Matthew#3854: would locking my f... |
Matthew#3854: thats like super not a thing right?
Envious#0739: It's default TDP is probably lower than 75
R0211#6041: ^
Matthew#3854: really?
R0211#6041: 1050ti is pegged to 75W stock
R0211#6041: Iirc 1050 might be like 70?
Matthew#3854: sounds rightish
Envious#0739: Some 1050 TI varients are 80w
Envious#0739: But the... |
Matthew#3854: oof
Matthew#3854: at +250 on core i get 1999
Matthew#3854: +255 crashes
Matthew#3854: 250 crashed
Matthew#3854: 245 crashed 😭
Matthew#3854: 230 seems stable
Matthew#3854: jk
Matthew#3854: so +220 on the core seems to be my max
Envious#0739: Overclocking in a nutshell
More more more ok problme
Less less ... |
Matthew#3854: i really want to get into water cooling
Envious#0739: Same
Envious#0739: I can't justify 70% price of my computer in watercooling parts
Envious#0739: Or if I go ghetto that still add up to about 45%
Matthew#3854: i think +220 core and +800 mem is where this card is tapping out
Matthew#3854: ali express wa... |
Cautilus#5912: the normal 5700 is currently clock capped though
Cold#0382: and GN made a video on the mounting pressure of the new cards and how to get better temps
Resune#9806: you shouldn't have to fuck with your card out of the box to not have it run loud and hot as fuck
∫ntegral#0450: https://www.tomshw.de/wp-cont... |
Betrayed#3582: maybe 1.2v but nothing on the other rails
Betrayed#3582: but really buying XOC cards for ambient is a waste
Callista#3917: "xoc"
Betrayed#3582: kingpin is entirely an XOC card
Betrayed#3582: :LUL:
Betrayed#3582: It only comes with a heatsink because EVGA has to sell more than a 100-200 cards
Fitz#8200: a... |
Cobalt Quasar#8948: you increase the voltage
Cobalt Quasar#8948: if my card isnt stable at stock, should i do the same? whats the max safe voltage for rx 480
pkkshadow#5844: polaris doesn't like temps above 60c or so. and max temp is about 80c.
Cobalt Quasar#8948: it never reaches those temps
Cobalt Quasar#8948: shuts ... |
If I set 1.25 on soc it stays solidly at that voltage, idle and under load, but I dunno if that's good long term
Resune#9806: I've heard 1.3v being said as safe, I've heard some say 1.25v but I haven't looked much into apu stuff, this is just what I've heard from GN
Resune#9806: I'd always err on the safe side and say ... |
pkkshadow#5844: :thotus: odd. glad it works now.
Gerard Marsden#2511: The new bios has the option to set vram above 2gb, but it's not working with my 2200g. Should there be a way to hack that?
Fitz#8200: Oof am4 bioses lock igpu ram usage?
Betrayed#3582: I mean
Betrayed#3582: on Intel
Betrayed#3582: I can set the memor... |
Betrayed#3582: and not much you can do without opening the card
GamingDevilsCC#2852: dang
GamingDevilsCC#2852: what area is the junction temperature sensor in btw?
Betrayed#3582: the die
Synchronus#4941: There's a bunch of sensors spread over the die
Synchronus#4941: Junction is just the hottest of the bunch
Synchronus... |
Incen#0117: Auto? I thought the iGPU was static
xlen#6206: Probably sometimes it will limit your OCs, but if you are not willing to take the risk of damaging the CPU/SoC, don't play with it too much
xlen#6206: Well it is not exactly static
xlen#6206: Has buildzoid made a video about iGPU OCing on zen+vega?🤔
Incen#0117... |
Extreme_Blaxkor#7367: i noticed that with temps using a chiller for it
Extreme_Blaxkor#7367: would run fine at 34-35c at 2300mhz
Extreme_Blaxkor#7367: if it got to 40c it would start crashing benchmarks
Deleted User#0000: yeah, sounds about right
Extreme_Blaxkor#7367: tried to use a bigger pump to lower temp and it did... |
Extreme_Blaxkor#7367: i ran a 5000 btu air conditioner with a china thermostat to control temps
Extreme_Blaxkor#7367: aquarium chillers cost alot more per cooling watt
Extreme_Blaxkor#7367: multiple times more
Extreme_Blaxkor#7367: only downside is that it has a mixed metal evap
Extreme_Blaxkor#7367: copper pipe/alumin... |
Extreme_Blaxkor#7367: went all over my pc and the floor
pkkshadow#5844: yikes
Extreme_Blaxkor#7367: wasnt being very thorough with clamping down every single fitting before putting a massively oversized pump on
Extreme_Blaxkor#7367: just friction fit over the barbs
Extreme_Blaxkor#7367: i managed to get my 1080 to run ... |
rozdog#0730: bruh i just pushed 1415MHz on my 750Ti stable
rozdog#0730: im pushing higher
Raudi Raccoon#6691: I need to test superposition with my 980's now that I have my OC dialed in.
Deleted User#0000: which 980s? :thinkdrop:
Therius#0899: is it worth updating gpu bios?
Deleted User#0000: eh, not rly in most cases
R... |
Deleted User#0000: :SpicyBlob:
Therius#0899: Okay another question is there a way to increase GPU voltage and how much worth does it bring
Raudi Raccoon#6691: Depends on the architecture, pascal and turning no
Raudi Raccoon#6691: Maxwell somewhat
Raudi Raccoon#6691: Kepler yes
Raudi Raccoon#6691: AMD rx and vega underv... |
Deleted User#0000: ^^
n1kobg#5048: @Raudi Raccoon I also have 980Ti
n1kobg#5048: air
Deleted User#0000: which model
n1kobg#5048: G1 Windforce
Deleted User#0000: my friend has the legendary 980 Poseidon but WILL NOT SELL ME IT
Deleted User#0000: no matter how much i offered
Raudi Raccoon#6691: These are 980ti hybrid coo... |
n1kobg#5048: @Raudi Raccoon
n1kobg#5048: mine is 75.5% or something similar
n1kobg#5048: If I slap a fan on top its fine in the summer with max OC, the memory is not very good OC +400 over stock mem. My 970 got +750-800
Raudi Raccoon#6691: 68.7%
Raudi Raccoon#6691: At least in the matrix
Raudi Raccoon#6691: The 980's i... |
Fitz#8200: 🤷
Fitz#8200: nobody uses userbench because its a bad benchmark
Betrayed#3582: ^
Magic#9096: fair
Fitz#8200: also your driver is really old
Fitz#8200: or I guess not really old, just not the current
Magic#9096: last time i updated it fucked windows
n1kobg#5048: @Magic Stock or tweaked Windows. Did u disable ... |
Fitz#8200: do you have a 6 pin power connector?
Magic#9096: yes
Fitz#8200: then LM if its a short term thing, solder a resistor if its long term
Magic#9096: this is the layout https://cdn.discordapp.com/attachments/305981966292090881/599637359545286676/1050tigx-8b.png
Magic#9096: its for the 1050ti version but the powe... |
n1kobg#5048: its there somewhere:
https://n1kobg.blogspot.com/p/blog-page.html
Fitz#8200: that's definitely not the only shunt resistor on the board
Extreme_Blaxkor#7367: i saw two that looked like it
Extreme_Blaxkor#7367: https://cdn.discordapp.com/attachments/305981966292090881/599641851007467591/unknown.png
Fitz#82... |
Extreme_Blaxkor#7367: mine i messed up pretty bad and it somehow still works lol
Magic#9096: it sucks that these cards are bios locked
Extreme_Blaxkor#7367: i think i soldered the pcie one on mine
Betrayed#3582: A 1050ti doesn't draw enough power to validate a shunt mod
Extreme_Blaxkor#7367: my 1080 shunt modding was a... |
Magic#9096: its unsupported for my GPUS vbios
Raudi Raccoon#6691: Its :blobsecret:
Magic#9096: i don't thing Nvidia would do anything if the way to do it was spread around
Fitz#8200: nvidia also says you can only 2 way sli pascal
Magic#9096: people have done 4 way
Magic#9096: its not great
Fitz#8200: **Nvidia** says yo... |
Betrayed#3582: you have to force it
Incen#0117: Does anybody know what "GPU Voltage" is referring to in GPU-Z? I'm running the 2200G with SOC and APU GFX at 1.2V. (gpu voltage says 1.35v)
Napoleon Blownapart#9413: Has anyone here actually done the washer mod on a 5700 xt?
Fitz#8200: I'm going to in like a week when min... |
andrewcandoall#0853: Anyone have issues ocing the memory of a 2080ti fe
andrewcandoall#0853: In msi
GamingDevilsCC#2852: @z1 doesn't work while auto-undervoltimg is enabled
Magic#9096: why do these 1050s have 8 gb of vram https://cdn.discordapp.com/attachments/305981966292090881/600095776831570002/unknown.png
Fitz#8200... |
Resune#9806: I score like high 13700's with my 970 and there's no way a 1050 should ever beat a 970 in firestrike
Callista#3917: ahahaha what the fuck
Callista#3917: 1050s perform around 670/960 range
rozdog#0730: does anyone know how to use handbrake for stress testing?
rozdog#0730: i was told to use handbrake instead... |
Betrayed#3582: @xlen voltage on Pascal just unlocks the 1.09v boost state
Betrayed#3582: so in reality you can now go to 1.08v
Betrayed#3582: if you want to lock at 1.09v use the V/F graph
xlen#6206: I still need to find the sweetest spot for VRAM as well, I hope it will go a bit higher than it is atm😀
Betrayed#3582: ... |
Charlie.#9236: its an rx 570
Coleh#4297: usually, AIB cards or non blower fans will go to their boost clocks or higher
Charlie.#9236: idk if its asus expedition or arez expedition
Charlie.#9236: but ik its an expedition 570 8gb oc
Coleh#4297: yeah your base clock is the absolute minimum it should hit when throttling(as... |
Gerard Marsden#2511: What if a certain setting takes 18 hours to bsod
Gerard Marsden#2511: Does increasing graphic settings help stress the gpu and make the bsod come sooner?
Charlie.#9236: well then if it bsod it bsod if it doesnt it doesnt
Charlie.#9236: lower it a bit and wait lol
Charlie.#9236: nothing else u can d... |
Charlie.#9236: ? lol
Charlie.#9236: is it beeping?
Gerard Marsden#2511: Wdym post codes
Gerard Marsden#2511: No
Charlie.#9236: if not then look at your power led
Charlie.#9236: is it blinking
Gerard Marsden#2511: No it just went into bios saying it failed to boot please change you settings or load default
Charlie.#9236... |
Gerard Marsden#2511: No
Charlie.#9236: What is it?
Gerard Marsden#2511: B450m 2200g
Gerard Marsden#2511: Sorry yes custom built
Gerard Marsden#2511: Bought the parts myself
Charlie.#9236: go back to the last known working configuration
Charlie.#9236: so set everything back the exact same way it was the last time it was... |
Gerard Marsden#2511: Yes
Charlie.#9236: ok
Gerard Marsden#2511: It may not work when I turn it on at night
Charlie.#9236: why??
Gerard Marsden#2511: It's random
Sometimes it posts sometimes it fails
Gerard Marsden#2511: Maybe it's because I changed the GPU clock and the ryzen doesn't like messing with the settings too ... |
FiShDiShFilms#7398: https://www.3dmark.com/spy/7639327
FiShDiShFilms#7398: Is this decent for a 1080ti and 7700k or not?
FiShDiShFilms#7398: Seeing way higher scores with the same hardware
∫ntegral#0450: 10k graphics is about right for a 1080ti
FiShDiShFilms#7398: Ty
XDbored#4364: 2190mhz in CSGO how is this stable i w... |
Chɾomenut#1709: @XDbored what golden 1060 u have to do 2160mhz?
XDbored#4364: its the cheapest EVGA 1060 6GB i could find it goes up to .1.093v has a crapy VRM and no special BIOS whatsoever
XDbored#4364: and i watercooled it
XDbored#4364: also i think maybe this CHVIII motherboard is slightly better at GPU overclockin... |
chriiiiiiiiiiiiiiiiiss#2347: Tho i think i read the Card Has a Stock power Limit of 380w
xlen#6206: Welp you don't always need more power to go much higher in frequencies
xlen#6206: My 1060 6GB doesn't go over 86% power limit although I have set it to 116 and it should handle the power without issues
xlen#6206: Actuall... |
Citi#5926: are you trying to delid a gpu?
Fitz#8200: its a 980ti, and those dont have IHSes
Fitz#8200: https://www.overclock.net/photopost/data/1390713/0/0c/0c15fba2_front.jpeg @Lopes this might help if you're looking for something missing
Fitz#8200: nvm that's not exactly the same, but the mosfet is missing in the sam... |
Fitz#8200: What cooler do you have on it?
kaiceps#0211: its on auto now, not sure if i wanna mess with it
kaiceps#0211: its a zotac gtx 1080 mini
kaiceps#0211: i didnt replace anything on it
Fitz#8200: Using msi afterburner?
kaiceps#0211: should i bring the power limit/temp limit down?
kaiceps#0211: it shouldnt be thro... |
Fitz#8200: Send a pic of what you see in afterburner
kaiceps#0211: ok
kaiceps#0211: pic isnt coming through just a sec
chriiiiiiiiiiiiiiiiiss#2347: im running at max 48*C
chriiiiiiiiiiiiiiiiiss#2347: and 2138 is stable
Fitz#8200: If a benchmark crashes, your drivers are either broken, or you're unstable
chriiiiiiiiiiii... |
kaiceps#0211: for daily
kaiceps#0211: it maxes out at 88 degrees when running timespy im not sure i should be concerned or not
chriiiiiiiiiiiiiiiiiss#2347: crank it up to a point where the noise is still ok
chriiiiiiiiiiiiiiiiiss#2347: and test where the temps then go
chriiiiiiiiiiiiiiiiiss#2347: im getting max 44 degr... |
kaiceps#0211: when running time spy
chriiiiiiiiiiiiiiiiiss#2347: HI
kaiceps#0211: mine maxes out at 88
Plotus#0001: just bought a RTX 2080 from Gigabyte
Plotus#0001: A-Chip
chriiiiiiiiiiiiiiiiiss#2347: nice 😄
Plotus#0001: How can i get a stable 2.1 Ghz ^^
Plotus#0001: i am new to this
Betrayed#3582: It's not that simp... |
Betrayed#3582: Superposition and games
Plotus#0001: okey
Plotus#0001: How long in games
Betrayed#3582: GPUs require a lot more variety to make sure its stable
Plotus#0001: 20 mins session?
Betrayed#3582: Whatever works for you
Plotus#0001: okey
Betrayed#3582: Generally they will crash quickly, but sometimes it takes aw... |
Plotus#0001: xD
Betrayed#3582: After that increase the core offset until its unstable, use the V/F curve if you want a couple more mhz
DaGunzi#1241: yeah thats why i recommend writing down acceptable noise levels 😛
Plotus#0001: factory OC 50% fan around 70 degress
DaGunzi#1241: offset is generally the fast method, v/f... |
Betrayed#3582: GPU Boost
Plotus#0001: temps are around 69/71
Plotus#0001: oh lol
Betrayed#3582: You are applying a +75 offset to the entire curve
Betrayed#3582: So when it can boost higher due to thermal headroom, etc it does
Plotus#0001: okey
DaGunzi#1241: yeah optimally youd try to find the lowest voltage you can run... |
Betrayed#3582: No single GPU can drive that
Plotus#0001: 2080 is too slow
Plotus#0001: for 144 Hz WGHD
Plotus#0001: WQHD*
Plotus#0001: Max Details
Plotus#0001: i know the 2080ti cant hit that
Plotus#0001: its just a dream for me
Plotus#0001: i have around 10 FPS more
Plotus#0001: with OC
Betrayed#3582: Is that 2560x144... |
Betrayed#3582: You don't need it at higher resolution (generally) and it harms performance
Plotus#0001: oh fuck you are right
Plotus#0001: i hate nvidia exp
DaGunzi#1241: tbf wqhd / qhd are pretty standard terms (see <https://en.wikipedia.org/wiki/Graphics_display_resolution> for a good list)
Plotus#0001: auto settings... |
Duke_Shambles#3805: jokes mate
Duke_Shambles#3805: lol
Betrayed#3582: You specify ultrawide if using ultrawide :alzadeals:
Duke_Shambles#3805: lol
kaiceps#0211: will messing with the fan speed mess up my graphics card lifespan?
Fitz#8200: No
Fitz#8200: Making them faster would marginally help lifespan since components ... |
Plotus#0001: I wanna switch to EK Watercooling
Plotus#0001: CPU + GPU
Plotus#0001: first timer, it is hard to install?
Betrayed#3582: not really just time consuming
Plotus#0001: is my warranty gone
Plotus#0001: on my GPU?
Plotus#0001: when removing the Heatsink
Plotus#0001: depends on the company right
Betrayed#3582: n... |
Plotus#0001: the OC
Betrayed#3582: Doesn't matter
Plotus#0001: kk
Betrayed#3582: You shouldn't RMA a card you overclocked
Plotus#0001: kk
kaiceps#0211: Is it safe to keep my card power limit at 120 degrees and at max temp (93)?
kaiceps#0211: i realized it goes over 80 on full load no matter what
kaiceps#0211: and i don... |
kaiceps#0211: mhz*
Fitz#8200: core clock doesnt really increase temps compared to power limit and voltage limits
kaiceps#0211: Would 93 degrees temp limit with 100 power limit work well ? (making it cooler)
Fitz#8200: yeah, you'll shave off maybe 20 or 30w
kaiceps#0211: Righty bro i'll try it now
kaiceps#0211: I just d... |
Charlie.#9236: Oop it went down to 950
Charlie.#9236: Wtf
kaiceps#0211: @Fitz Its a bit cooler now at 80 degrees
kaiceps#0211: Should i crank up the fan speed to 100 when it hits 80?
Fitz#8200: core is at 1000?
kaiceps#0211: base core clock is 1620mhz
kaiceps#0211: but i added +125
Fitz#8200: or wait I was mixing up na... |
Charlie.#9236: oof ok so i set the overclock in wattman and its better but its not even reaching boost clock, its at 1220
chriiiiiiiiiiiiiiiiiss#2347: what card?
Charlie.#9236: Asus rx 570 8gb expedition OC edition
Charlie.#9236: That's alot of words
Fitz#8200: gpu boost 3.0 starts to reduce freq at 49c, but it starts ... |
chriiiiiiiiiiiiiiiiiss#2347: at the moment i have a accelero 3 extreme installed
kaiceps#0211: My card runs pretty damn hot and I don’t like it that way even though I don’t do a lot of gaming
chriiiiiiiiiiiiiiiiiss#2347: but there are only 2 waterblocks for that card
chriiiiiiiiiiiiiiiiiss#2347: and theyre both form al... |
chriiiiiiiiiiiiiiiiiss#2347: i thought about that one but theres also a bitspower block with backplane, but i cant find it anywheren in stock where it isnt 200$ xD
Fitz#8200: 🤷
Fitz#8200: there's always a g12 and aio
chriiiiiiiiiiiiiiiiiss#2347: on a card i paid 85€ for xD
Fitz#8200: http://www.performance-pcs.com/bit... |
kaiceps#0211: How Long would the 1080 last before an upgrade is needed?
chriiiiiiiiiiiiiiiiiss#2347: i would guess 4-5 years?
chriiiiiiiiiiiiiiiiiss#2347: if you dont mind lowering the settings a bit
chriiiiiiiiiiiiiiiiiss#2347: its already 3 years old and i can still game on ultra at 1080p with 120hz+
chriiiiiiiiiiiii... |
Charlie.#9236: idk why thats what im asking lmao
xlen#6206: if your temperatures are okayish then go for it
xlen#6206: it should go up to like 580-590 performance in theory as it practically is the same GPU
Charlie.#9236: im trying ?? i have the overclock set to 1445, but its not reaching those speeds
xlen#6206: go slo... |
ExtreemVin#1134: dont use furmark, its not very good it mainly stresses the vrm, try like superposition
xlen#6206: some people don't get higher than what you have on memory others can get to up to 2250MHz
Charlie.#9236: Superposition was already opened and loading the benchmark
Charlie.#9236: And yeah idk I might try t... |
xlen#6206: as long as you don't go to sky you will be fine
Charlie.#9236: What would be safe
xlen#6206: give it a small boost
Charlie.#9236: A boost to whay
Charlie.#9236: What*
xlen#6206: I wouldn't give it more than +50mV
Charlie.#9236: also
Charlie.#9236: https://cdn.discordapp.com/attachments/305981966292090881/60... |
Charlie.#9236: oh
Charlie.#9236: i have dumb bitch disease youll have to like tell me how much higher for each or something
xlen#6206: you should be able to get state 3 to somewhere where you have state 5/6
Charlie.#9236: u want me to go up 100 Mv for that??
Charlie.#9236: im v confused
xlen#6206: no you don't need mor... |
xlen#6206: don't touch wattman for now
Charlie.#9236: nothing else works lmao wattman like overrides everything else
xlen#6206: just up the frequencies as much as they go
Charlie.#9236: 👀???
Charlie.#9236: you want me to like push everything as high as wattman will let me??
xlen#6206: no
xlen#6206: I want you to go hi... |
Charlie.#9236: not that i want it to
Charlie.#9236: it doesnt go higher than like 1350 MHz so i could set it to +1000 and it wouldnt make a difference because it cant reach those speeds
Charlie.#9236: thats my issue
xlen#6206: increase power limit and temperature limit
Charlie.#9236: already did
xlen#6206: get in a gam... |
xlen#6206: more represents reality
Charlie.#9236: th?
xlen#6206: terrorist hunt
Charlie.#9236: oh
Charlie.#9236: yeah ill do that
Charlie.#9236: its launching
xlen#6206: I can pass the benchmark with like 2120 on core for my 1060 6GB, but it won't run stable in games further than that
xlen#6206: I can finish 3dmark wit... |
Charlie.#9236: Oof
Charlie.#9236: Alright well I'll load into a th
Charlie.#9236: After I turn vsync off
Charlie.#9236: Oh I could have sworn I had 75hz refresh rate
Charlie.#9236: Ig not lol
Charlie.#9236: It's loading the map
Charlie.#9236: Ok I'm getting a maxed out 1385 MHz
xlen#6206: what are your temperatures?
Ch... |
Charlie.#9236: My PSU is clicking wtf
xlen#6206: what do you have?
Charlie.#9236: EVGA 600b
Charlie.#9236: Or b600
Charlie.#9236: It's a 600w evga
xlen#6206: yea I know
Charlie.#9236: Lol
xlen#6206: what is the rest of your system?
Charlie.#9236: Wdym like cpu and all that?
Charlie.#9236: Rx 570 8gb, i7 3770, 8gb ddr3 ... |
Charlie.#9236: Iike tell me what to set to what
Charlie.#9236: Otherwise I'm gonna get confused and fuck something up
xlen#6206: let me read a bit what others have used with good results on your GPU
Charlie.#9236: Alright
xlen#6206: https://cdn.discordapp.com/attachments/305981966292090881/601905505295794176/unknown.p... |
xlen#6206: yea it want higher voltages for anything above where it maxes on you
Charlie.#9236: Alright I'll set voltage up a bit
Charlie.#9236: I'm @ 1150 rn so what should I set it to
xlen#6206: well you can try to get 1450@1150mV
Charlie.#9236: Alright well I gotta relaunch r6s cus PC crasged
Charlie.#9236: Crashed*
... |
Charlie.#9236: oh
Charlie.#9236: alright
xlen#6206: it just can be shortening your lifespan in the long run
Charlie.#9236: Ok well I haven't touched voltage yet so
Charlie.#9236: Let's see how well 1450 @ 1150 works
xlen#6206: if it is stable at 1450 you can try to go higher
Charlie.#9236: Yeah (:
Charlie.#9236: It's l... |
Charlie.#9236: Uh oh
Charlie.#9236: Game froze
xlen#6206: on 1450?
Charlie.#9236: Yeah
Charlie.#9236: PC crash 😩
Charlie.#9236: Idk if it had hit 1450 but my PC froze
xlen#6206: well then try to get 1430
Charlie.#9236: Yeah I set to 1440 and ran fur mark
Charlie.#9236: https://cdn.discordapp.com/attachments/305981966... |
xlen#6206: 👍
xlen#6206: Good luck have fun
XDbored#4364: looking at all the Firestrike scores above mine and most of them are weird laptops and LN2 and ones with secondary GPUs that are not SLI and one with 12GB of memory instead of 6GB how come most of the top scores are with laptops?
XDbored#4364: i don't think i am... |
Resune#9806: idk what's on the high
fayrez#8062: low side has higher current rating
For single phase Amps, you must check high side
fayrez#8062: They are limit of input current usually if recall correctly
fayrez#8062: Also you cannot just add all mosfet current rating, because all phase are not passing current , they a... |
fayrez#8062: just put decent thermal interface between fets and rad and give airflow
Resune#9806: there's thermal pads with a PCB plate and a very large cooler
fayrez#8062: are you shunt modding card?
Resune#9806: No just a simple bios mod
Resune#9806: https://cdn.discordapp.com/attachments/305981966292090881/60219659... |
Resune#9806: it boosts until 91C
fayrez#8062: Lol...
fayrez#8062: You need educate yourself more on gpu boost
Resune#9806: which it'll never hit, my core is around 1511mhz with 1975mhz on mem
fayrez#8062: Lower temp to under 47-49C and check clocks then
Resune#9806: I'm never thermal throttling, always power limit or v... |
Fitz#8200: I dont think Fay does
Fitz#8200: 3.0 starts throttling at 49c
Fitz#8200: 2.0 starts at whatever you set it to
Resune#9806: which is 91C for me lol
fayrez#8062: that is on stock when ocing its a bit different at least on my gen 9xx cards from gigabyte (did not have other wendor)
Resune#9806: 🤷 I experience n... |
fayrez#8062: What loads and clocks give you instability?
fayrez#8062: When you diagnosed that powerlimit is limiting factor for higher clocks?
Resune#9806: yes because my power limit status is pegged above 190W
Resune#9806: but it allows up to about 205W
Resune#9806: I don't need more power than 205W, I'm fine with whe... |
fayrez#8062: Usually should be ok for datasheet specs, but actuall thermalpads or heatsink design can be problem if that current rating is close to high side fets
fayrez#8062: Cause low side of that model fets will not throtle . High side not sure
fayrez#8062: And inductors if they was cheap out. Can be 150a rating ins... |
fayrez#8062: If you see any then it might be power limited when power spikes are noted
fayrez#8062: that is should not be consern for long term if you have good thermalpads and no dust mouses or bunnies on rad
Resune#9806: It's pretty clean
Resune#9806: it's whatever stock thermal pads are, I haven't changed them
fayre... |
fayrez#8062: Tryed in russian or other languages? Cause sometimes in english i can not find proper info.
fayrez#8062: That photo without adding some text clearing effects on gimp or photoshop is hard to tell what model are they xD
fayrez#8062: lol.
fayrez#8062: btw if your gpu temp is about 60'C at full blast of fans... |
ssss#5963: how do you put gpu in rest state
ssss#5963: when ur not running games
Coleh#4297: it does it by itself
Coleh#4297: if it's idling at slightly higher clocks it's because the display res/refresh rate calls for it
Coleh#4297: or you have multiple desktops
Coleh#4297: if you have neither of these, you have a lin... |
Wilcox#5960: if i use my old 1070 I can boot to windows
xlen#6206: the strange thing is even if the GPU wouldn't be working properly it should post and even start to load windows with drivers it would crash while loading windows
Resune#9806: unless the card is dead
xlen#6206: what do you think by dead?
Resune#9806: it'... |
Wilcox#5960: I won't
xlen#6206: also I think as long as you haven't changed voltages it shouldn't be an issue in any way at all
Wilcox#5960: IDK if i should send it back to overclockersUK or MSI
Wilcox#5960: I think OCUK first
Wilcox#5960: they're less likely to check imo
Wilcox#5960: but I did up voltage in afterburne... |
Deleted User#0000: the core runs at 2070mhz most of the time
Deleted User#0000: core temp is always below 70 Celcius
Deleted User#0000: vrm below 80
Deleted User#0000: and vram below 86
Deleted User#0000: it didn't crash in superstition or timespy
Deleted User#0000: but in bf one and the division 2 my system crashes wh... |
Resune#9806: have you actually tried stress testing the card?
Resune#9806: like using a program like 3dmark, or superposition,?
Deleted User#0000: read the whole wall of text
Deleted User#0000: i did that
Deleted User#0000: also i am running at native resolution
Resune#9806: and does it still crash while at stock?
Dele... |
Magic#9096: is there any bios tweak for the rx 580 8G to give it more power
4a61636b#5675: See if you can find a guide with Polaris Bios Editor
4a61636b#5675: Do so at your own risk
Magic#9096: i have a spare gpu to help me flash it back
pkkshadow#5844: that or an igpu
Magic#9096: my CPU doesn't have one
Magic#9096: it... |
∫ntegral#0450: nah doesn't matter
∫ntegral#0450: not sure what those errors are tho
Magic#9096: could my graphics drivers be out of date
Magic#9096: when i just installed them today
∫ntegral#0450: this is the version i'm using on my 570 https://cdn.discordapp.com/attachments/305981966292090881/602649787057176582/Overdr... |
Magic#9096: What should I change in this program to give me more power
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/602657820487188521/unknown.png
∫ntegral#0450: right click the title bar
Magic#9096: K
Magic#9096: What next
∫ntegral#0450: uhh
∫ntegral#0450: you'll have to dump your current ... |
∫ntegral#0450: then just change the max power target to whatever you want
∫ntegral#0450: save to .reg file
∫ntegral#0450: then double click the reg file
Magic#9096: 1000000%
∫ntegral#0450: reboot
Magic#9096: Lol
Magic#9096: I set it to 50%
Magic#9096: Nothing to crazy
Magic#9096: I'm finally no longer on a locked down ... |
Kim#9859: i don't think it will but i might as well ask
Kim#9859: i mean FPS wise in FFMPEG using AMF
pathan421id#7376: how come oc scanner says my stock clocks aren't stable?
pathan421id#7376: https://i.imgur.com/9n2RKzk.png
Magic#9096: Because it's a useless tool
Magic#9096: Anything over the stock +30% power becomes... |
Kim#9859: i'd help if i could magic, sorry
RV#6351: guys that have a 1080ti with xoc bios what clocks are you running?
RV#6351: or what kind of clocks can i expect
keeph8n#0369: Depends on silicon tbh
keeph8n#0369: 2150 or so on my FTW3. Depends on what I’m doing.
keeph8n#0369: Just on a plain loop.
Fitz#8200: xoc bios... |
Resune#9806: Yeah my dad has a AMP extreme, and I'd be buying it if he upgrades to a 2070 super
Fitz#8200: amp extreme is the zotac equivalent of the ftw3
Fitz#8200: there's no cooling on vrms, kinda like the evga fiasco
Resune#9806: yeah, but is it *that* bad?
Resune#9806: like the cards are dying
Resune#9806: at stoc... |
Fitz#8200: even just like a probe and aquacomputer thing
Resune#9806: in terms of thermal monitoring all i have is a flir camera
Resune#9806: which doesn't do me all too good
Resune#9806: are the 1070's hungry for bandwidth like maxwell cards are?
Fitz#8200: aquacomputer quadro or fabwerk, like $30 and a $5 sensor
Fitz... |
Resune#9806: like this is what's on my zotac card
Resune#9806: it's a nice plate for all of the vram, and mosfets even mem mosfets
Fitz#8200: yeah
Fitz#8200: most companies have a big plate that kinda just gets hot
Resune#9806: Yeah it looked like they just hot glued a girder onto the vrms
Magic#9096: Is any one famili... |
Sup_711#5343: Idk, maybe I'll try it again
Raudi Raccoon#6691: Precision works with all cards other than AMD based gpu's.
Sup_711#5343: Ok, thanks
Magic#9096: I think I'm starting to figure out how to use this extra power
Magic#9096: I just got an extra 25mhz on the CC with +31%
Magic#9096: I think it need some more po... |
Resune#9806: 80c at 1.25v
Magic#9096: Is anything higher then 1.25 okay
Resune#9806: 1.25v? No not unless you're on liquid
Magic#9096: Because I'm hitting highs of 1.28 and I'm staying in the 70-60c range
Resune#9806: I'm not sure if that's safe, this is just what the wiki says
Magic#9096: Its also not a reference card... |
Izebrra#8146: Leave it?
Izebrra#8146: Or increase
4a61636b#5675: Mem is pretty low tbh, what mem you rocking?
4a61636b#5675: Also what does your core boost to?
Magic#9096: i just spent some time and this seems stable https://cdn.discordapp.com/attachments/305981966292090881/603380040700526596/unknown.png
Magic#9096: an... |
Magic#9096: I'm about to see
Magic#9096: On valley with the extreme I got 2331 with it
Magic#9096: I'm testing without
Magic#9096: This card could definitely go higher with it being on water
Magic#9096: I'm doing one more of each just to see if anything changes
Magic#9096: It's about the same with as it it is with out... |
Magic#9096: And my gpu cc oc is higher
Sup_711#5343: Apparently 80mhz wasn't stable
Sup_711#5343: It keeps stuttering
Sup_711#5343: Right now I'm down to 60mhz
Magic#9096: Oof
Magic#9096: I'm able to do plus 250mhz but it does t help
Sup_711#5343: Wait, focusing heaven decreases fps
Sup_711#5343: Ok, were back up to 85... |
Sup_711#5343: That may also be memory causing issues
Sup_711#5343: magic, is it safe to max out the GPU voltage slider
Betrayed#3582: yes
Sup_711#5343: Ok
Sup_711#5343: Even a 30mhz core offset isn't stable, with the slider maxed
Sup_711#5343: Not even 20
Magic#9096: For you it would be
Magic#9096: For me not so much
M... |
Sup_711#5343: Not even 10msh is stable
Magic#9096: https://cdn.discordapp.com/attachments/305981966292090881/603403010915303434/image0.png
Magic#9096: Ya boys #3
Sup_711#5343: Nice
Sup_711#5343: Idk why I can't get above 10mhz boost
Sup_711#5343: Did I lose that badly
Magic#9096: Possibly
Sup_711#5343: Or I suck
Magic... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.