data stringlengths 14 24.3k |
|---|
Raudi Raccoon#6691: The XTR core doesnt seem to be all that special. Since 1500 seems to be the limit of it for anything even game stable.
Raudi Raccoon#6691: Actually it might of been higher than 1v i think around 1.15v for 1500 on both cards then anything past that needed 1.2v+
ExtreemVin#1134: I get 1530mhz game sta... |
xlen#6206: https://cdn.discordapp.com/attachments/305981966292090881/608326741819392000/unknown.png
xlen#6206: this is what I have now
xlen#6206: it probably can be optimized a bit more
Deleted User#0000: Should I copy urs ?
xlen#6206: pls don't
xlen#6206: trial and error
xlen#6206: my VRAM is a bit higher @4536
xlen#... |
xlen#6206: manual OC is where it is
Deleted User#0000: Code 3 in msi and was thinking that lol ok so leave it the way it is and turn up what ? And do like .20 or .40 at a time
xlen#6206: Do 1 step at a time and test stability for like 5-10minutes
xlen#6206: At one point you will notice either stutters or artifacts
Dele... |
Deleted User#0000: Ok soon back it back ?
Deleted User#0000: What would I put done ?
Deleted User#0000: Down"""
xlen#6206: Test some benchmarks if you are getting lower scores than before, back down a few steps
xlen#6206: It is really a trial and error and comparison of results
Deleted User#0000: Yeah that's true but w... |
Deleted User#0000: I don't that for 10 minutes it passed just
xlen#6206: it might like a higher frequency than what you have now more, so you should test both 1-2 steps higher and lower
xlen#6206: see where you have the best stability and performance
Deleted User#0000: Screen Flickrs with that and ok just trying to fig... |
xlen#6206: 5-10minutes is usually enough to see if there are any issues with stability
Deleted User#0000: Ok it passed ran it for 11 minutes
xlen#6206: ok then up the core by 1 step
Deleted User#0000: Ok
Deleted User#0000: That was ok to
Deleted User#0000: Raise the core agian ?
xlen#6206: then go further
xlen#6206: go... |
Deleted User#0000: Still sable on core 48
xlen#6206: wdym by 48?
Deleted User#0000: 43 soery
xlen#6206: do a screenshot of what you have
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608344058582269992/IMG_20190806_143154.jpg
Deleted User#0000: https://cdn.discordapp.com/attachments/305... |
Deleted User#0000: Ok I set core to 160 gunna test then go up by one and ok
xlen#6206: ok
Deleted User#0000: My v is 1075 tho is that ok
xlen#6206: yes
xlen#6206: don't touch it for now
Deleted User#0000: Ok
xlen#6206: test how high on core it will go with what you have atm
xlen#6206: if you see like small boost to a h... |
xlen#6206: yes
Deleted User#0000: Still good testing on core clock 163
xlen#6206: is it actually boosting there?
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608349438703828992/IMG_20190806_145319.jpg,https://cdn.discordapp.com/attachments/305981966292090881/608349439995936778/IMG_20190... |
Magic#9096: My card can get up to 80c on kombustor but it stays in the 50c range in games
Deleted User#0000: Like GTA ? Or cause fornite is cpu ? And ok I'll downlaod that super and test it
Magic#9096: Use super
xlen#6206: GTA is not great for GPU testing it more depends on RAM
Magic#9096: Not true
Magic#9096: Gta is ... |
xlen#6206: ?
Magic#9096: Yes
xlen#6206: I have 2x16
Deleted User#0000: Can I use haven bench ? Got to wait a nice bit for this download for super
Magic#9096: I started with 2x4 and added the 2x8
xlen#6206: you can use it, but heaven will go further than games in a lot of cases
Deleted User#0000: And quick question I go... |
Magic#9096: Its unstable for most people
xlen#6206: @Magic I have an issue with mismatching ICs becasue RAM manufacturers can't use the same ICs for the whole model :D
anyway I have 2933 14-15-15-15-29
Deleted User#0000: Cause I'm on a Asus Maximus VIi hero and it's good with me
Deleted User#0000: Been using xmp
Magic#... |
Magic#9096: I could probably lower that a lot
xlen#6206: it should go to at least 16 17 17 17 34
xlen#6206: what ICs you have?
Magic#9096: I believe the crappy ones were e die
Magic#9096: So max of 1.4v
xlen#6206: I have one stick with b die and one with mfr
xlen#6206: and I have a lot lower latency
Magic#9096: My othe... |
Magic#9096: 40*
Deleted User#0000: With super do I test the game tab ?
Magic#9096: No do benchmark and stress
Deleted User#0000: Ok
Magic#9096: Nvm you have to pay for that
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608355384771608578/IMG_20190806_151657.jpg
Magic#9096: Do the benchma... |
Deleted User#0000: Yeah it stresses it over the vram
Magic#9096: Thats okay
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608356203369725952/IMG_20190806_152015.jpg
Deleted User#0000: Hit run anyway?
Magic#9096: Try medium first then do high
Deleted User#0000: Ok
Magic#9096: That was the... |
Magic#9096: Also the top rx 580 is me lol
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608357625339445264/IMG_20190806_152550.jpg
Magic#9096: So it's stable good
xlen#6206: Magic timings I suggested aren't final, that was a starting point to check and optimize
Magic#9096: Yeah
Deleted U... |
Deleted User#0000: I'll try 510 first
xlen#6206: +1000 is practically maybe top 0.001% of GPUs I've seen
Deleted User#0000: Like a 2070 ?
Magic#9096: No
Magic#9096: It's the bin of the card
Deleted User#0000: Oh ok running the test on 510 now
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881... |
Deleted User#0000: And is oç the gpu messing with fps
Deleted User#0000: Cause I'm getting less in fortnite
Deleted User#0000: ?
Magic#9096: I mean I'm beating the 1060
xlen#6206: on what?
Deleted User#0000: How do I get the overlay to work in game with afterburner
Magic#9096: Timespy and firestrike
xlen#6206: https:/... |
Deleted User#0000: Ok
xlen#6206: it is better on parallax, but weaker on complex splatting
Magic#9096: Are you going by was userbench says
xlen#6206: in games 1060 6gb is 7-10% better on avg
xlen#6206: if you don't look on effective speeds on userbenchmark it is good enough for quick comparision
xlen#6206: I can find o... |
Deleted User#0000: Won't come up on screen
xlen#6206: Add the game to list
Magic#9096: https://cdn.discordapp.com/attachments/305981966292090881/608378755617914913/image0.png
Magic#9096: It's better but not by 10%
Magic#9096: And this is on overclocked
Magic#9096: Non
Magic#9096: Also those are all DX11
Magic#9096: An... |
xlen#6206: I have a dead 680
xlen#6206: I can't get shadowplay to work for more than 2-3 days at a time
Deleted User#0000: Oh do I add the launcher
xlen#6206: did you enable this in afterburner? https://cdn.discordapp.com/attachments/305981966292090881/608380056745803787/unknown.png
Magic#9096: Be careful with the osd
... |
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608382551043866624/IMG_20190806_170201.jpg
Deleted User#0000: Not bad so far
xlen#6206: nice looks like your RAM is going higher than mine
Deleted User#0000: Really
Deleted User#0000: I can keep adding more memory clock speed
QuePaso#5074: An... |
Deleted User#0000: Ok sounds great
Deleted User#0000: Do I just keep changing the memory core. Tho untill it's sable and keep it at 2070mhz it's only at 2037mhz
xlen#6206: go higher with memory until it becomes unstable, when it becomes unstable revert to last stable value, afterwards do the same for Core
Deleted User#... |
Berfs1#6150: 9160 memory speed
Berfs1#6150: Nice
Raudi Raccoon#6691: Hmm Superposition might just work with Crossfire :HYPERS:
Deleted User#0000: Yeah I guess I keep going with the memory untill it's unstable ? Then set to sable and then try to core
Berfs1#6150: Eh the fan speed
Berfs1#6150: See, I usually go for the m... |
Berfs1#6150: It’s usually enough to cool the GPU by a big margin
Berfs1#6150: It’s also better than keeping the fan stopped since it lowers energy usage by reducing leakage
Berfs1#6150: Ironically you may spend 1 extra W vs 0 when the fan is stopped, but you can save about 10 W of leakage
Deleted User#0000: Ok nice tip... |
Berfs1#6150: Okay
Deleted User#0000: I got 2x8 ram 1866
Berfs1#6150: Use EVGA Precision x1 or x16
Berfs1#6150: 1.5V?
Berfs1#6150: Or 1.65
Deleted User#0000: 1.5
Berfs1#6150: Not bad
Berfs1#6150: Lol I have the fastest Gskill Ripjawsx kit in the world
Deleted User#0000: And what do u mean use EVGA precision ? Kinda new ... |
Deleted User#0000: Ok sounds good to and ok is that better then mail after burner
Deleted User#0000: MSI"""
Berfs1#6150: I say x16 or x1 because both have a form of locking boost clocks (x1 recently added boost lock, and x16 has had KBoost)
Berfs1#6150: Mail after burner
Berfs1#6150: Lol
Deleted User#0000: Hahaha spell... |
Deleted User#0000: Ok gunna download that
Berfs1#6150: Because it seems boost lock works most of the time versus KBoost which is a hit or miss on x16 depending on the exact graphics card
Berfs1#6150: And x1 was taken off of beta so I can now officially recommend that
Deleted User#0000: Basically the same thing just cha... |
Deleted User#0000: Might keep using MSI cause I'm not sure on that one
Berfs1#6150: 1936 might be the glitch on 10 series
Deleted User#0000: What do u mean by that ?
ᴡɪᴄᴀᴇʙᴇᴛʜ x ʙɪᴛᴄʜ#5846: Hello, i have a small issue with my rx 480 sometime he's spike to 1.55V like 0.5s
ᴡɪᴄᴀᴇʙᴇᴛʜ x ʙɪᴛᴄʜ#5846: https://cdn.discordapp... |
Raudi Raccoon#6691: A lot of people seem to do them.
Raudi Raccoon#6691: Not 100% what is needed to do so since more info you find is gonna be fore mining on the rx 580
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608431083775721472/IMG_20190806_201732.jpg
Deleted User#0000: Still going... |
xlen#6206: no
xlen#6206: you got faster VRAM
xlen#6206: which means it will respond faster to what you will do
xlen#6206: and it will have faster transfer speeds
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608434994536251403/IMG_20190806_203248.jpg,https://cdn.discordapp.com/attachment... |
Deleted User#0000: Running high good
Deleted User#0000: Gunna try extreme after this before I go farther
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608437406911430657/JPEG_20190806_204255.jpg
Raudi Raccoon#6691: Extreme will run like a slideshow cause it's really heavy for a workload
... |
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608441948696739869/IMG_20190806_210054.jpg
Deleted User#0000: I'll check
Berfs1#6150: Ah okay
Berfs1#6150: 9410
xlen#6206: he is quite lucky with his VRAM
Berfs1#6150: Especially that it’s a 3gb
Berfs1#6150: And not a 6gb 9gbps
xlen#6206: tbh... |
Deleted User#0000: So don't go past 700 on the memory clock or keep going on the untill its not sable ? Like u said before
Deleted User#0000: After this is done think I'm gunna try to OC my ram
Deleted User#0000: @Berfs1 @xlen
Berfs1#6150: I mean
xlen#6206: go as far as it is stable
Berfs1#6150: If you have a kingpin
B... |
Berfs1#6150: For stock voltage
Deleted User#0000: Yeah seem that with is level 1 to 10 or something in the bosi
Raudi Raccoon#6691: 1.3v safe on air with safe temps.
Berfs1#6150: Oh okay
Berfs1#6150: Safe as in
Berfs1#6150: Workstation, full boost speed for several hours at a time safe?
Berfs1#6150: Or just gaming safe... |
Berfs1#6150: Dang
Berfs1#6150: Would I be able to do 1500?
Berfs1#6150: I did 1400, seems fully stable
Raudi Raccoon#6691: My Matrix Platnium 980ti does 1587 at 1.212v
Berfs1#6150: Memory is already at 7500, seems stable
Berfs1#6150: But are GM200s binned higher than GM204s?
Raudi Raccoon#6691: As far as I know not rea... |
Berfs1#6150: https://docs.google.com/spreadsheets/d/1-JXBPMRZtUx0q0BMMa8Nzm8YZiyPGkjeEZfZ2DOr8y8
Raudi Raccoon#6691: I usually just used a mix between Heaven/Valley/FSE/FSU for stability.
Berfs1#6150: I shall try that too
Berfs1#6150: If u go over to the tabs right of 500 series, you will see tflops, and price/tflops
D... |
Deleted User#0000: Still sable
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608454938514685985/IMG_20190806_215234.jpg
xlen#6206: why do you use precision x1?
Deleted User#0000: Using both MSI and that and cause x1 isn't in beta
xlen#6206: x1 for me didn't even set fan curve not to ment... |
Deleted User#0000: Can u try to help in the other chat
Deleted User#0000: Hello think I'm gunna leave the memory core alone now cause it's at 4855mhz
Deleted User#0000: So do u just up the core
Cyb3r#2495: what is the best tool to measure vram size and test it?
Deleted User#0000: Use gpu-z to see most of that
Cyb3r#249... |
Berfs1#6150: I don’t think that’s how it works
Berfs1#6150: It’s usually just if you are using a ssd as a boot drive
Berfs1#6150: Not sure how that affects vram in any way though
Cyb3r#2495: tell that to win 10
Cyb3r#2495: no page file resulted in me having 2gb of vram usable out of 6
Cyb3r#2495: page file hey look 6gb... |
Berfs1#6150: Platform as in what cpu+mobo
Cyb3r#2495: Ryzen 3700x x570 tuf gaming
Gingly#4446: Will a couple heatsinks work as cooling for vram? https://cdn.discordapp.com/attachments/305981966292090881/608734913767800952/image0.jpg
Deleted User#0000: R9 390 8g are they better then a 1060 OC edition 3gb
Atria#9870: I'd... |
Magic#9096: were hitting a high in coin price
Betrayed#3582: eh doubt it
Betrayed#3582: Its not profitable to mine in terms of return
Betrayed#3582: difficulty + rewards are not in a good place
Magic#9096: i mean im mining .50$ cad rn
Magic#9096: i was only mining half of that last month
Deleted User#0000: @Magic what ... |
Deleted User#0000: Better overclocked?
Magic#9096: no you get money
Deleted User#0000: Think u can give me a link to a tutorial or give me a Guide wouldn't mind trying it
Magic#9096: thats you to figure out
Deleted User#0000: Ok bud
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608773061... |
Betrayed#3582: idk in X1 shows it
Betrayed#3582: might have to enable it in the settings
Deleted User#0000: Better to see in msi ?
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/608783139283927041/IMG_20190806_213723.jpg
Betrayed#3582: yeah so if you max it
Betrayed#3582: you can use the ... |
Boosted𝙂𝙎𝙓#0983: https://www.youtube.com/watch?v=QmoNAuLEu4M
LimeWarrior#2918: Is there anyway to benchmark my system windowed
Resune#9806: depends on the benchmark
LimeWarrior#2918: I went from a 12000 on firestrike extrem to a 15000 lmao
LimeWarrior#2918: and this was before even gpu oc
LimeWarrior#2918: I just to... |
LimeWarrior#2918: I tried oc’ing my gpu but occasionally it would get stutters from too high clock and the lights in my room would flicker too
LimeWarrior#2918: so is stutter because of drawing too much power?
LimeWarrior#2918: Or instability?
LimeWarrior#2918: Lol
xlen#6206: too high power draw probably
xlen#6206: @De... |
Betrayed#3582: Its much more VRAM heavy and gives a score
TheObah#8311: for core is heaven ok ?
Betrayed#3582: Its not great
Betrayed#3582: Its easy to run
Betrayed#3582: So you might be running unstable clocks
TheObah#8311: hmmm
TheObah#8311: what do you suggest? time spy?
Betrayed#3582: Time Spy / Firestrike (Extreme... |
TheObah#8311: oh
Betrayed#3582: That's what 2100mhz on core
TheObah#8311: 2150 if i remember correctly
Betrayed#3582: Then that's really good
Betrayed#3582: Mine does 2070 give or take if i really push it
Betrayed#3582: and garbage memory
TheObah#8311: its 2100 with 140
TheObah#8311: i found a pic
Betrayed#3582: Mine d... |
TheObah#8311: the temp was a bit high
TheObah#8311: bcuz it's from last year during summer
FreshMadFruits#1944: how come u get a stable overclock with benchmarks like superposition or leaving furmark on for a few hours but the moment u start a game it artifacts like crazy? what am i missing?
Betrayed#3582: FurMark isn... |
Berfs1#6150: I also recommend doing 1.1V just because voltage fluctuation should be less
FreshMadFruits#1944: i had it undervolted to -120mv on stock
FreshMadFruits#1944: bumped the voltage a bit so it wont go over 1.2v with oc
FreshMadFruits#1944: Also how could you tell its unstable on core?
Betrayed#3582: it doesn't... |
MrBenz#3299: need help with vbios..anyone know?
MrBenz#3299: actually i cant extract my bios / save the file from gpu-z
MrBenz#3299: it says bios reading is not supported in this device
MrBenz#3299: its a laptop wth embedded vbios i believe
FreshMadFruits#1944: Yes but really under 60degrees omg this xfx 580 reaches ea... |
Deleted User#0000: Dont think its reading that much in GPU
Deleted User#0000: I'll take a pic
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/609087286675636379/IMG_20190808_154511.jpg,https://cdn.discordapp.com/attachments/305981966292090881/609087287690526757/IMG_20190808_154518.jpg
Dele... |
xlen#6206: clock it as high as it goes
Berfs1#6150: 2415x4 is 9660 MHz
xlen#6206: that is where he is
Berfs1#6150: Ye
Berfs1#6150: Pretty good imho
xlen#6206: it is damn good
xlen#6206: like I'm at 2219x4 now and going higher introduces instabilities
xlen#6206: I have a 1060 6GB tho
xlen#6206: which might change a lot
... |
xlen#6206: do it
xlen#6206: if it crashes with GPU stock settings then your CPU OC might be unstable
Deleted User#0000: I put to threw realbench and it passed
Deleted User#0000: But testing it now
Deleted User#0000: It was the gpu
Deleted User#0000: Might of been the core Voltage maybe
Deleted User#0000: Just don't mak... |
saylae#7029: awesome. ive just never done a gpu repaste and taking all precautions
saylae#7029: thanks
Berfs1#6150: Oh for vega
Berfs1#6150: Be extra careful
Berfs1#6150: Don’t screw up the HBM dies that are on the same package
Berfs1#6150: That’ll be an expensive mistake, so be really careful when cleaning the die
Ber... |
botburger#3722: standard? or asus rog themes
botburger#3722: themed
botburger#3722: or does it not make a differnece
botburger#3722: difference
Berfs1#6150: It’s just a GUI difference
Berfs1#6150: If u prefer the Asus theme then go ahead and download that, otherwise the normal one is fine too
botburger#3722: ok got it... |
Berfs1#6150: And then tell me what memory clock says in GPU z
Berfs1#6150: Yes in afterburner
botburger#3722: 1066.7
botburger#3722: MHz
botburger#3722: anything else?
botburger#3722: ??
Berfs1#6150: Okay
Berfs1#6150: Wait
Berfs1#6150: Increasing memory clock by 50, made it 1066?
Berfs1#6150: I meant vram speed
Berfs1#... |
Berfs1#6150: Right in the red box
Berfs1#6150: https://cdn.discordapp.com/attachments/305981966292090881/609205057493401611/image0.png
saylae#7029: @Berfs1 how should i be more careful when cleaning the hbm? from videos ive seen it looks like everyone just cleans it off the same?
botburger#3722: so up 100? @Berfs1
Ber... |
Cobalt Quasar#8948: Like i just dont know wtf
Cobalt Quasar#8948: Also i cant set the voltage higher than 1150mv
Raudi Raccoon#6691: Same GPU as yesterday?
Cobalt Quasar#8948: Idk if i was here yesterday
Cobalt Quasar#8948: Its an rx 480 reference
Cobalt Quasar#8948: But i have asked this here about 3 months ago
Cobalt... |
Cobalt Quasar#8948: Stock
Cobalt Quasar#8948: With higher fan curve
Cobalt Quasar#8948: Also it never goes above 60c
Raudi Raccoon#6691: :ThinkCrash: Is event viewer reporting anything?
Cobalt Quasar#8948: Ill check again i dont remember what it said
Cobalt Quasar#8948: My life has aids
Cobalt Quasar#8948: Let me type ... |
Cobalt Quasar#8948: Or the one from techpowerup
saylae#7029: So noticed in wattman that my vega 64 peaked at 2300ish mhz at some point in the day
saylae#7029: its undervolted to 1570mhz/1050mv on p7
Cobalt Quasar#8948: i think it does have the one from techpowerup
saylae#7029: with the rest of the states scaled down fr... |
Cobalt Quasar#8948: now its pullling over 200w but still under 1ghz
Betrayed#3582: I'm thinking of some other garbage
Betrayed#3582: :petersen:
Betrayed#3582: DDU the driver
Raudi Raccoon#6691: Evga OC Scannee :PepegaLaugh:
Cobalt Quasar#8948: ive done that so many times
Raudi Raccoon#6691: I wonder if clock states are... |
Raudi Raccoon#6691: I had to fix the bios on both my 580's cause memory straps were really bad for gaming.
Cobalt Quasar#8948: no i flashed the correct bios from techpowerup
Cobalt Quasar#8948: Now its doing 1100mhz on the donut
Cobalt Quasar#8948: Sp that would be state3
Cobalt Quasar#8948: It can do the donut but it ... |
Cobalt Quasar#8948: Over and under volted
Cobalt Quasar#8948: Well the 1100-1200mhz its doing now are good enough for me
Cobalt Quasar#8948: Ill leave it at that
ExtreemVin#1134: 1100-1200mhz is pretty low, it should do 1266 at least unless your card has a mining bios
MrBenz#3299: @Deleted User GTX 950m
Deleted User#0... |
∫ntegral#0450: my 570 needs 1025mV for 1300MHz
∫ntegral#0450: but mine is pretty bad
Ryan#0905: @NeptuneIX afaik underclock in itself will not really bring the temp down, it has to be undervolted as well (manually or automaticaly)
NeptuneIX#7466: @∫ntegral wow really
NeptuneIX#7466: Isnt 1150 stock
∫ntegral#0450: yes
N... |
∫ntegral#0450: heaven is easy to pass
∫ntegral#0450: i used to do kombustor artifact scanner for 10 mins and that's been pretty good for me
NeptuneIX#7466: Fiddling around w stuff like this is such a pain
NeptuneIX#7466: And if it goes wrong I usually shit my pants gg
∫ntegral#0450: maybe oc'ing isn't for you
∫ntegral... |
NeptuneIX#7466: Would 1100mv be like, guaranteed to work w this underclock @∫ntegral
∫ntegral#0450: probs
NeptuneIX#7466: Probs?
∫ntegral#0450: probably
Deleted User#0000: Hey guys, I recently got the Gigabyte Vega 56 Gaming OC, I tried undervolting and these are the results:
Balanced mode I get 1290-1310mhz in unigi... |
NeptuneIX#7466: @∫ntegral would apex legends training area be a good way to test? That game legit fucks my gpu in terms of usage, usually it pushed it to the max if i dont cap it at 60fps
NeptuneIX#7466: I think itd be a good real world test
NeptuneIX#7466: since that game really pushes my shit
∫ntegral#0450: whatever ... |
∫ntegral#0450: np
∫ntegral#0450: btw, the voltages can only be in multiples of 6.25
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/609688204894928896/unknown.png
∫ntegral#0450: setting 1070 is the same as setting 1075
NeptuneIX#7466: yh it automatically changed itself
∫ntegral#0450: 1080 = 10... |
Acero/Holo#0888: @Deleted User increase your voltage on the frequency
Deleted User#0000: Guys I have a gigabyte Vega 56 Gaming oc
Deleted User#0000: Ik it's crap
Deleted User#0000: But I got Samsung memory
Deleted User#0000: So I was thinking if I should flash the v64 bios on it
Deleted User#0000: It only has a single... |
Deleted User#0000: In games/benchmarks I get 1560MHz
Deleted User#0000: Oh and the power limit is set to +50%
Acero/Holo#0888: nice what are your temps looking like?
Magic#9096: https://www.3dmark.com/spy/8097410
Magic#9096: i beat my score
Magic#9096: https://www.3dmark.com/spy/8033940
Magic#9096: thats my old top
pun... |
punkrr#0009: what do you mean by normal
DZCreeper#6471: like, have you tried Unigine Superposition?
DZCreeper#6471: to test the GPU performance?
DZCreeper#6471: and Geekbench 3 for the CPU performance.
punkrr#0009: i mean i have nothing to compare it to
punkrr#0009: the last time i did a gpu bench was months ago
DZCree... |
Betrayed#3582: so you can easily gain 20% or more in points
Betrayed#3582: just by using some tools and making the benchmark look like ass
punkrr#0009: how do i check frame times?
punkrr#0009: because only some of the games i play get these fps "drops"
punkrr#0009: other games hold the 75 no problem
Betrayed#3582: down... |
Betrayed#3582: yeah you can calculate the frametime via framerate
punkrr#0009: is it a gpu or a monitor issue?
Betrayed#3582: but that doesn't help stuttering / spikes
Betrayed#3582: GPU
Betrayed#3582: Monitor would only show whats being sent to it
punkrr#0009: wait i forgot bungie disabled overlays for this game
punkr... |
punkrr#0009: hmm
punkrr#0009: guess ill DDU
punkrr#0009: i tried updating already
Fitz#8200: did you ever have other gpus on the system, and not ddu between them?
punkrr#0009: like a year ago
punkrr#0009: but this problem just started over the past few weeks (or thats when ive noticed it)
punkrr#0009: actually i might'... |
punkrr#0009: buildapc just ignores me
Betrayed#3582: and we aren't really tech support
Betrayed#3582: Your issue isn't uncommon and has a ton of causes
punkrr#0009: yeah i know that
Deleted User#0000: Quick question. Does using the blck overclocking method mess with the performance of pcie devices like an m2 drive and ... |
LiquidFizz#8446: fans are at max
LiquidFizz#8446: its an AIO though
LiquidFizz#8446: so idk if that could mean the fluid either
zhrooms#0659: anyone know if there are some Time Spy tweaks? a dude uploaded a really sketchy result 2 days ago, people matching his speed get 500 graphics score less, it makes no sense
Raudi ... |
Fitz#8200: oh okay. So gpu boost 3.0 starts downclocking at 49c, but over 55, it stops dropping significantly more
MRschmeckles#6319: so would you thinkg moving to a watercooled setup would allow me to push higher? im floating around 50-58c rn on air
Fitz#8200: if you already have a cpu loop, why not. Most pascal card... |
Snaky115#4135: DDU, enable safe mode dialog in settings (default its not on iirc) and then yeah, let it reboot into safemode for you
saylae#7029: I recently installed afterburner jsut for fan curve adjustments and asus' suite for case fan adjustments. Could this have weird behavior issues with wattman and my vega 64?
s... |
hefty (pastebin.com/6MvxCyF8)#6587: I turned down the memory in MSI afterburner and hit apply and my screen flashed a mess of pixels, i could still move my cursor though
hefty (pastebin.com/6MvxCyF8)#6587: I should probably avoid diving right into it without deeper knowledge outside of " DONT MESS WITH THE VOLTS"
Extr... |
xlen#6206: just do proper testing
hefty (pastebin.com/6MvxCyF8)#6587: my temps raise to 76 if i turn up resolution on a vr game high up
hefty (pastebin.com/6MvxCyF8)#6587: so i have some potential here i think
hefty (pastebin.com/6MvxCyF8)#6587: and If anything wrong happens and it crashes, it won't apply unless I hit ... |
xlen#6206: like you obv won't do +1GHz
Deleted User#0000: So, i guess my gpu is dead? i mean its 11 years old so i guess so
xlen#6206: best choice is to do 1-2 step increments @hefty (pastebin.com/6MvxCyF8)
hefty (pastebin.com/6MvxCyF8)#6587: I am doing it at like +5 for each
xlen#6206: @Deleted User I am not sure, but... |
hefty (pastebin.com/6MvxCyF8)#6587: since I'm doing this to run vrchat better in the more intensive lobbies
hefty (pastebin.com/6MvxCyF8)#6587: https://cdn.discordapp.com/attachments/305981966292090881/610962591921078293/unknown.png
hefty (pastebin.com/6MvxCyF8)#6587: it seems to run fine atm, at least discord with th... |
hefty (pastebin.com/6MvxCyF8)#6587: or just VR tech problem unrelated
hefty (pastebin.com/6MvxCyF8)#6587: but my right controller is losing connection
hefty (pastebin.com/6MvxCyF8)#6587: 13.8 - 14.5 ms of 16.7 ms with stock core clock and memory clock speeds https://cdn.discordapp.com/attachments/305981966292090881/610... |
hefty (pastebin.com/6MvxCyF8)#6587: what is a step exactly?
xlen#6206: one value change for core on pascal it is like 13MHz
hefty (pastebin.com/6MvxCyF8)#6587: how do I find that value
xlen#6206: just move the slider a bit and you will see the value change
hefty (pastebin.com/6MvxCyF8)#6587: k
hefty (pastebin.com/6MvxC... |
hefty (pastebin.com/6MvxCyF8)#6587: whichever had gtx 745 on it
hefty (pastebin.com/6MvxCyF8)#6587: fan speed is going up quite a bit
hefty (pastebin.com/6MvxCyF8)#6587: 62
hefty (pastebin.com/6MvxCyF8)#6587: I hear some odd noises in the pc
hefty (pastebin.com/6MvxCyF8)#6587: I'm getting abit courageous here
hefty (p... |
hefty (pastebin.com/6MvxCyF8)#6587: 90C is probably not worth it,
hefty (pastebin.com/6MvxCyF8)#6587: https://cdn.discordapp.com/attachments/305981966292090881/610968599858774036/unknown.png
hefty (pastebin.com/6MvxCyF8)#6587: mhz is maxed out now.
hefty (pastebin.com/6MvxCyF8)#6587: for core clock
hefty (pastebin.com... |
hefty (pastebin.com/6MvxCyF8)#6587: u sure
xlen#6206: Avg 745 has no issues you have to be pretty unlucky to be under it
xlen#6206: Memory should do +160 with no issues, most OCs avg at around +200
hefty (pastebin.com/6MvxCyF8)#6587: i swore I saw icons flicker on chrome
hefty (pastebin.com/6MvxCyF8)#6587: hm
hefty (pa... |
Resune#9806: what kind of application is MHW? not sure what you're talking about
Chris.Zzz#1424: its a game, monster hunter world
Resune#9806: ah okay so monster hunter might be extremely picky
Resune#9806: some games really hate overclocks, or are super sensitive to any instability
Resune#9806: is it stable without an... |
hefty (pastebin.com/6MvxCyF8)#6587: While playing beat saber
hefty (pastebin.com/6MvxCyF8)#6587: the vr screen flashed colors and my pc crashed
hefty (pastebin.com/6MvxCyF8)#6587: how do i increase my fan target
Resune#9806: in msi afterburner?
xlen#6206: @hefty (pastebin.com/6MvxCyF8) welp then 220MHz is not stable
De... |
Betrayed#3582: yes
ZoroSeerus#0785: I’ve got a mediocre Zotac blower then evidently. Obv kind of a given since blower but still
hefty (pastebin.com/6MvxCyF8)#6587: so if i wanted to use core voltage to my advantage
hefty (pastebin.com/6MvxCyF8)#6587: how do I raise it enough to unlock any limits in msi?
∫ntegral#0450: ... |
Deleted User#0000: download msi afterburner
hefty (pastebin.com/6MvxCyF8)#6587: the screen on my windows mixed reality isnt displaying anything and the mixed reality app keeps crashing
hefty (pastebin.com/6MvxCyF8)#6587: wtf did I do
hefty (pastebin.com/6MvxCyF8)#6587: did i
hefty (pastebin.com/6MvxCyF8)#6587: did I br... |
∫ntegral#0450: you just want to set a flat curve
KingFaris10#1337: Alright ty
kona#9246: 🤔 doesn't it?
kona#9246: or is that just vram?
Deleted User#0000: I have an MSI RX 570 ARMOR 8G and I would like to overclock it for a bit more fps can anyone help me out
Fitz#8200: https://cdn.discordapp.com/attachments/30598196... |
whiteshark#1560: if you want your gpu to still idle skip the CTRL+L part
Ramlord#2733: kk
Resune#9806: on the 1070's where do most core clocks end up?
Resune#9806: just popped my 1070 in and I have no idea where core and mem usually ends up
Resune#9806: it's got Samsung gddr5 in it, which is nice
Resune#9806: default ... |
Resune#9806: Crashed at 2088mhz
Resune#9806: That’s why I wonder if more voltage would help
∫ntegral#0450: well more voltage can help
∫ntegral#0450: but after a certain point it just does nothing but add more heat
Resune#9806: Right, well I’m at 1.063v
∫ntegral#0450: might want to flash a higher power limit bios
Resune... |
whiteshark#1560: no one has tested above?
whiteshark#1560: ofc they have
whiteshark#1560: there is very little scaling on air
whiteshark#1560: the smaller the die the more
whiteshark#1560: 1080 ti gain almost nothing
whiteshark#1560: 1030s do a decent amount
∫ntegral#0450: i remember my 1080ti did like 2050MHz 1.093v o... |
∫ntegral#0450: i don't think i could even push higher memory with the xoc bios
∫ntegral#0450: it did scale with voltage tho
Betrayed#3582: I also had issues with benchmarks being straight garbage on other tests
Betrayed#3582: like 8-10fps bad on timespy
Betrayed#3582: idk it if was having driver issues
Betrayed#3582: h... |
Resune#9806: This thing sounds like a rocket because I have the fans maxed
Resune#9806: Doing 2050 core 2151 mem 54c
Betrayed#3582: ~~I think someone here had a 1070 that did 2176mhz on air~~
Resune#9806: What kind of golden lmao
Betrayed#3582: 2100 is what I would consider a good 1070
Betrayed#3582: 2150+ is golden
Be... |
Betrayed#3582: afterburner?
∫ntegral#0450: ctrl f
Betrayed#3582: that works
Resune#9806: After this stress run I’ll check it
Betrayed#3582: the symbol beside the core offset slider
∫ntegral#0450: the curve only applies at your current temperature tho
Resune#9806: I wanna see the frame stability with these clocks
∫ntegr... |
Betrayed#3582: yes
Betrayed#3582: GDDR5X is all micron as far as i know
Resune#9806: I have Sammy ram so I’m hoping it’s a bit better?
∫ntegral#0450: ¯\_(ツ)_/¯
∫ntegral#0450: 9.5Gbps if lucky
∫ntegral#0450: but i think 9Gbps is average
Resune#9806: So 2250
Resune#9806: Man pascal fucking hates temps
Chɾomenut#1709: I h... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.