command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show ipv6-source-guard | show ipv6-source-guard | (For non-ELS switches) Display IPv6 source guard database information. | [] | view
Output Fields
Table 786 on page 22624 lists the output fields for the show ipv6-source-guard command. Output fields are
listed in the approximate order in which they appear.
Table 786: show ipv6-source-guard Output Fields
Field Name
Field Description
VLAN
VLAN on which IPv6 source guard is enabled.
Interface
Acces... | Command introduced in Junos OS Release 14.1X53-D10. | [
"Example: Configuring IP Source Guard on a Data VLAN That Shares an Interface with a Voice VLAN",
"Example: Configuring IP Source Guard with Other EX Series Switch Features to Mitigate Address-",
"Spoofing Attacks on Untrusted Access Interfaces",
"Verifying That IP Source Guard Is Working Correctly"
] | |
show isis adjacency holddown | show isis adjacency holddown
<level>
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display holddown status and time when IS-IS adjacencies are being formed. Adjacency holddown
process takes place on an IS-IS level basis. When adjacency holdown is enabled, IS-IS adjacencies are
formed sequentially. There is a holddown time between each adjacency and the process is completed
when all IS-IS adjacencies ... | [
{
"name": "none",
"desc": "Display standard overview information about IS-IS adjacency holddown for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display standard information about IS-IS adjacency holddown with the specified level of output."
},
{
... | view
Output Fields
Field
Field Description
Level
IS-IS level:
•
1—Level 1 information
•
2—Level 2 information
status
IS-IS Adjacency holddown status:
•
active—IS-IS adjacency holddown is in process.
•
inactive—IS-IS adjacency holddown process is completed.
•
disabled—IS-IS adjacency holddown is disabled.
when
The time ... | Command introduced in Junos OS Release 16.1. | [] | |
show isis adjacency | show isis adjacency
<system-id>
<brief | detail | extensive>
<instance instance-name> | Display information about IS-IS neighbors. | [
{
"name": "none",
"desc": "Display standard information about IS-IS neighbors for all routing instances."
},
{
"name": "system id",
"desc": "(Optional) Display information about IS-IS neighbors for the specified intermediate system."
},
{
"name": "brief | detail | extensive",
"desc":... | view
Output Fields
Table 787 on page 22631 describes the output fields for the show isis adjacency command. Output fields
are listed in the approximate order in which they appear.
Table 787: show isis adjacency Output Fields
Field Name
Field Description
Level of Output
Interface
Interface through which the neighbor is... | Command introduced before Junos OS Release 7.4. | [] | |
show isis authentication | show isis authentication
<instance instance-name> | Display information about Intermediate System-to-Intermediate System (IS-IS) authentication. | [
{
"name": "none",
"desc": "Display information about IS-IS authentication."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display IS-IS authentication for the specified routing instance."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perf... | view
Output Fields
Table 788 on page 22638 describes the output fields for the show isis authentication command. Output
fields are listed in the approximate order in which they appear.
Table 788: show isis authentication Output Fields
Field Name
Field Description
Interface
Interface name.
Level
IS-IS level.
IIH Auth
IS... | Command introduced in Junos OS Release 7.5.
Support for hitless authentication key rollover introduced in Junos OS Release 11.2. | [] | |
show isis backup coverage | show isis backup coverage
<instance instance-name> | Display information about the level of backup coverage available. | [
{
"name": "none",
"desc": "Display information about the level of backup coverage available for all the nodes and prefixes in the network."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information about the level of backup coverage for a specific IS-IS routing instance."
... | view
Output Fields
Table 789 on page 22641 lists the output fields for the show isis backup coverage command. Output fields
are listed in the approximate order in which they appear.
Table 789: show isis backup coverage Output Fields
Field Name
Field Description
Topology
Type of topology or address family: IPV4 Unicast ... | Command introduced in Junos OS Release 9.5. | [
"Understanding Loop-Free Alternate Routes for IS-IS"
] | |
show isis backup label-switched-path | show isis backup label-switched-path | Display information about MPLS label-switched-paths (LSPs) designated as backup routes for IS-IS
routes. | [
{
"name": "none",
"desc": "Display information about MPLS LSPs designated as backup routes for IS-IS routes."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logi... | view
Output Fields
Table 790 on page 22644 lists the output fields for the show isis backup label-switched-path command.
Output fields are listed in the approximate order in which they appear.
Table 790: show isis backup label-switched-path Output Fields
Field Name
Field Description
Backup MPLS LSPs
List of MPLS LSPs ... | Command introduced in Junos OS Release 9.5. | [
"Understanding Loop-Free Alternate Routes for IS-IS"
] | |
show isis backup spf results | show isis backup spf results
<instance instance-name>
<level (1 | 2)>
<no-coverage>
<topology (ipv4-unicast | unicast)> | Display information about IS-IS shortest-path-first (SPF) calculations for backup paths. | [
{
"name": "none",
"desc": "Display information about IS-IS SPF calculations for all backup paths for all destination nodes."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display SPF calculations for backup paths for the specified routing instance."
},
{
"name": "level (1 | ... | view
Output Fields
Table 791 on page 22647 lists the output fields for the show isis backup spf results command. Output
fields are listed in the approximate order in which they appear.
Table 791: show isis backup spf results Output Fields
Field Name
Field Description
node-name
Name of the destination node.
Address
Add... | Command introduced in Junos OS Release 9.5. | [
"Understanding Loop-Free Alternate Routes for IS-IS"
] | |
show isis context-identifier | show isis context-identifier
<brief | detail | extensive>
<identifier name>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display IS-IS context identifier information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "identifier name",
"desc": "(Optional) Display information about the specified context identifier."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display entr... | View
Output Fields
Table 792 on page 22652 lists the output fields for the show isis context-identifier command. Output
fields are listed in the approximate order in which they appear.
Table 792: show isis context-identifier Output Fields
Field Name
Field Description
Level of Output
Context
IPv4 address that defines a ... | Command introduced in Junos OS Release 10.4. | [] | |
show isis database | show isis database
<system-id>
<brief | detail | extensive>
<level (1 | 2)>
<instance instance-name> | Display the entries in the Intermediate System-to-Intermediate System (IS-IS) link-state database, which
contains data about PDU packets. | [
{
"name": "none",
"desc": "Display standard information about IS-IS link-state database entries for all routing instances."
},
{
"name": "system id",
"desc": "(Optional) Display IS-IS link-state database entries for the specified intermediate system."
},
{
"name": "brief | detail | exten... | view
Output Fields
Table 793 on page 22655 describes the output fields for the show isis database command. Output fields
are listed in the approximate order in which they appear. Fields that contain internal IS-IS information
useful only in troubleshooting obscure problems are not described in the table. For more detai... | Command introduced before Junos OS Release 7.4.
flexible-algorithm id option introduced in Junos OS Release 19.4R1.
igp-instance option introduced in Junos OS Release 21.1R1. | [] | |
show isis flex-algorithm | show isis (spring | spf | route) flex-algorithm flex-algorithm-id
logical-system (all |logical-system-name) | Display the configured flexible algorithm and the defined parameters. | [
{
"name": "flex-algorithm-id",
"desc": "Specify the ID of the flex algorithm to view its configured parameters."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 794 on page 22664 describes the output fields for the show isis flex-algorithm command. Output
fields are listed in the approximate order in which they appear.
Table 794: show isis flex-algorithm Output Fields
Field Name
Field Description
flex algorithm
Name of the defined flexible algorithm.
... | Command introduced in Junos OS Release 19.4R1. | [
"How to Configure Flexible Algorithms in IS-IS for Segment Routing Traffic Engineering"
] | |
show isis hostname | show isis hostname | Display IS-IS hostname database information.
This command displays the system ID-to-name cache. The output shows if the mapping has been
learned by receipt of a Hostname TLV #137 (type dynamic) configured in Junos OS with the set system
host-name command, or a static mapping defined in Junos OS with the set system stat... | [
{
"name": "none",
"desc": "Display IS-IS hostname database information."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 795 on page 22669 describes the output fields for the show isis hostname command. Output fields
are listed in the approximate order in which they appear.
Table 795: show isis hostname Output Fields
Field Name
Field Description
System Id
System identifier mapped to the hostname.
Hostname
Hostnam... | Command introduced before Junos OS Release 7.4. | [] | |
show isis interface | show isis interface
<brief | detail | extensive>
<interface-name> | Display status information about Intermediate System-to-Intermediate System (IS-IS)-enabled
interfaces.
NOTE: If the configured metric for an IS-IS level is above 63, and the wide-metrics-only
statement is not configured, the show isis interface detail command and the show isis
interface extensive command display 63 as... | [
{
"name": "none",
"desc": "Display standard information about all IS-IS-enabled interfaces."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface-name",
"desc": "(Optional) Display information about the specifi... | view
Output Fields
Table 796 on page 22672 describes the output fields for the show isis interface command. Output fields
are listed in the approximate order in which they appear.
Table 796: show isis interface Output Fields
Field Name
Field Description
Level of Output
interface-name
Name of the interface.
detail
Desi... | Command introduced before Junos OS Release 7.4. | [
"Understanding Wide IS-IS Metrics for Traffic Engineering",
"Example: Enabling Wide IS-IS Metrics for Traffic Engineering"
] | |
show isis interface-group | show isis interface-group
<instance instance>
<logical-system (all| logical-system-name)> | Display status information about the specified interface group. | [
{
"name": "none",
"desc": "Display standard status information about the interface group."
},
{
"name": "instance",
"desc": "Display the status information about the interface group for the specified instance."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "lo... | view
Output Fields
Table 797 on page 22678 describes the output fields for the show isis interface-group command. Output
fields are listed in the approximate order in which they appear.
Table 797: show layer2-map Output Fields
Field Name
Field Description
Interface-group
Name of the interface group followed by the inte... | Command introduced in Junos OS Release 16.1. | [] | |
show isis layer2-map | show isis layer2-map
<destination>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display the details of the Layer 2 ARP or neighbor discovery next hops and the mapped data link
address in the kernel for the routing instances. | [
{
"name": "none",
"desc": "Display all the Layer 2 mappings in the kernel for all supported address families for all routing instances."
},
{
"name": "destination",
"desc": "(Optional) Display the Layer 2 mapping for a specified destination address."
},
{
"name": "instance instance-name"... | view
Output Fields
Table 798 on page 22681 describes the output fields for the show isis layer2-map command. Output fields
are listed in the approximate order in which they appear.
Table 798: show isis layer2-map Output Fields
Field Name
Field Description
Interface
The interface name of the next hop.
IP address
IP addr... | Command introduced in Junos OS Release 16.1. | [
"Layer 2 Mapping for IS-IS"
] | |
show isis overview | show isis overview
<instance instance-name> | Display IS-IS overview information. | [
{
"name": "none",
"desc": "Display standard overview information about IS-IS for all routing instances."
},
{
"name": "igp-instance instance-name",
"desc": "(Optional) Specify the isis-instance you must include in the configuration to run multiple IS-IS instances on the routing device."
},
{... | view
Output Fields
Table 799 on page 22684 lists the output fields for the show isis overview command. Output fields are
listed in the approximate order in which they appear.
Table 799: show isis overview Output Fields
Field Name
Field Description
Hostname
Name of the router.
Sysid
Part of the ISO address of the routin... | Command introduced in Junos OS Release 8.5.
igp-instance option introduced in Junos OS Release 21.1R1. | [] | |
show isis purge log | show isis purge log
<instance instance-name>
<level level>
<logical-system (all | logical-system-name)> | Displays the purge log history received from adjacent devices. The purge log can include the type, length
and value (TLV) details and the Intermediate System (IS) identification. Use this command to identify the
purge originator and view other details of recent purges. You can display the last 50 entries in the IS-IS
p... | [
{
"name": "none",
"desc": "Display purge log of all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display purge log of the specified routing instance."
},
{
"name": "level level",
"desc": "(Optional) Display purge log of IS-IS routers that belong to t... | view
Output Fields
Table 800 on page 22692 describes the output fields for the show isis purge log command. Output fields
are listed in the approximate order in which they appear.
Table 800: show isis purge log Output Fields
Field Name
Field Description
IS-IS Level
Level:
•
1—Level 1 only
•
2—Level 2 only
•
3—Level 1 a... | Command introduced in Junos OS Release 16.2R1. | [] | |
show isis route download priority | show isis route download priority
<destination>
<floodgroup floodgroup>
<inet | inet6>
<instance instance-name>
<iso>
<logical-system (all | logical-system-name>
<nexthop interface | neighbor>
<topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)> | Display the routes in the IS-IS routing table in the sequence of set priority. IS-IS routes set with a high
priority are displayed first followed by medium and low priority prefixes. Internet Service Providers (ISP)
can configure route priority to ensure faster convergence for important customers.
Configure a routing p... | [
{
"name": "none",
"desc": "Display all routes in the IS-IS routing table in order of their priority for all supported address families for all routing instances."
},
{
"name": "destination",
"desc": "(Optional) Destination address for the route for which you want to display the priority."
},
... | view
Output Fields
Table 801 on page 22695 describes the output fields for the show isis route command. Output fields are
listed in the approximate order in which they appear.
Table 801: show isis route Output Fields
Field Name
Field Description
Current version
Number of the current version of the IS-IS routing table.
... | Command introduced in Junos OS Release 17.1. | [] | |
show isis route | show isis route
<destination>
<inet | inet6>
<instance instance-name>
<topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)> | Display the routes in the IS-IS routing table. | [
{
"name": "none",
"desc": "Display all routes in the IS-IS routing table for all supported address families for all routing instances."
},
{
"name": "destination",
"desc": "(Optional) Destination address for the route."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display inet (I... | view
Output Fields
Table 802 on page 22699 describes the output fields for the show isis route command. Output fields are
listed in the approximate order in which they appear.
Table 802: show isis route Output Fields
Field Name
Field Description
Current version
Number of the current version of the IS-IS routing table.... | Command introduced before Junos OS Release 7.4. | [] | |
show isis spf | show isis spf (brief | log | results)
<instance instance-name>
<level (1 | 2)>
<topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)> | Display information about IS-IS shortest-path-first (SPF) calculations. | [
{
"name": "brief",
"desc": "Display an overview of SPF calculations."
},
{
"name": "log",
"desc": "Display the log of SPF calculations."
},
{
"name": "results",
"desc": "Display the results of SPF calculations."
},
{
"name": "instance instance instance-name",
"desc": "(Op... | view
Output Fields
Table 803 on page 22705 describes the output fields for the show isis spf command. Output fields are
listed in the approximate order in which they appear.
Table 803: show isis spf Output Fields
Field Name
Field Description
Node
System ID of a node.
Metric
Metric to the node.
Interface
Interface of th... | Command introduced before Junos OS Release 7.4. | [] | |
show isis spring interface traffic-statistics | show isis spring interface traffic-statistics
logical-system (all |logical-system-name) | Display the traffic statistics of an IS-IS SPRING link. SPRING traffic is measured to recalculate the actual
available bandwidth to RSVP for traffic engineering. | [
{
"name": "none",
"desc": "Display the traffic statistics of an IS-IS SPRING link."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Sample Output
show isis spring interface traffic-statistics
user@host> show isis spring interface traffic-statistics
Interface name Bytes Packets
ge-0/0/1.0 1287495 3000
ae0.0 2332435435 10233 | Command introduced in Junos OS Release 17.3R1. | [] | |
show isis spring sensor info | show isis spring sensor info
logical-system (all |logical-system-name) | Displays a list of sensors associated with the label IS-IS route and next hops for segment routing traffic.
The command only displays the information related to the sensors and not the traffic statistics. | [
{
"name": "none",
"desc": "Display the sensor information of an IS-IS SPRING route."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 1 describes the output fields for the show isis spring sensor info command. Output fields are listed
in the approximate order in which they appear.
Table 804: show isis spring sensor info Output Fields
Field
Field Description
Sensor-name
Represents the router or interface that the sensor is as... | Command introduced in Release 19.1R1. | [
"Understanding Source Packet Routing in Networking (SPRING)"
] | |
show isis statistics | show isis statistics
<instance instance-name> | Display statistics about IS-IS traffic. | [
{
"name": "none",
"desc": "Display IS-IS traffic statistics for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display statistics for the specified routing instance."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Pe... | view
Output Fields
Table 805 on page 22716 describes the output fields for the show isis statistics command. Output fields
are listed in the approximate order in which they appear.
Table 805: show isis statistics Output Fields
Field Name
Field Description
PDU type
PDU type:
•
CSNP—Complete sequence number PDUs contain... | Command introduced before Junos OS Release 7.4. | [] | |
show l2-learning context-history | show l2-learning context-history
<bd>
<fnh>
<from time>
<ifbd>
<in-mem-dbg>
<info>
<inh>
<irb>
<kernel>
<l2alm-mac>
<l2alm-mac-ip>
<mac>
<mac-addr>
<mac-ip>
<memory>
<nh>
<rpd>
<rtsock>
<rtt>
<save filename>
<to time>
<vtep> | (MX Series routers)—Display the context history for the Layer 2 address learning manager in Ethernet
VPN (EVPN) networks. | [
{
"name": "bd",
"desc": "Display bridge domain context history"
},
{
"name": "fnh",
"desc": "Display flood next-hop context history"
},
{
"name": "from",
"desc": "Display context from (YYYY-MM-DD.HH:MM:SS)"
},
{
"name": "ifbd",
"desc": "Display interface bridge domain (IF... | view | Command introduced in Junos OS Release 23.4R2 and 24.2R1. | [] | |
show l2-learning global-information | show l2-learning global-information | Display Layer 2 learning process-related information for the entire device. | [] | view
Output Fields
Table 806 on page 22722 describes the output fields for the show l2-learning global-information command.
Output fields are listed in the approximate order in which they appear.
Table 806: show l2-learning global-information Output Fields
Field Name
Field Description
MAC aging interval
Configured tim... | Command introduced in Junos OS Release 8.4. | [] | |
show l2-learning global-mac-count | show l2-learning global-mac-count | (MX Series routers only) Display the total number of dynamic and static MAC addresses learned for the
entire router. | [] | view
Output Fields
Displays the total number of dynamic and static MAC addresses learned for the entire router.
Sample Output
show l2-learning global-mac-count
user@host> show l2-learning global-mac-count
100 dynamic and static MAC addresses learned globally | Command introduced in Junos OS Release 9.3. | [] | |
show l2-learning instance | show l2-learning instance | Display Layer 2 learning properties for all the configured routing instances. | [] | view
Output Fields
Table 807 on page 22726 describes the output fields for the show l2-learning instance command. Output
fields are listed in the approximate order in which they appear.
Table 807: show l2-learning instance Output Fields
Field Name
Field Description
Routing Instance
Name of routing instance.
Bridging D... | (MX Series routers only) Command introduced in Junos OS Release 8.4. | [] | |
show l2-learning interface | show l2-learning interface | (MX Series routers only) Display Layer 2 learning information for all the interfaces. | [] | view
Output Fields
Table 808 on page 22728 describes the output fields for the show l2-learning interface command. Output
fields are listed in the approximate order in which they appear.
Table 808: show l2-learning interfaceOutput Fields
Field Name
Field Description
Logical interface
Name of the logical interface.
Inde... | Command introduced in Junos OS Release 8.4.
Added sample output to indicate an EVPN MAC Pinned interface, introduced in Junos OS 16.2R1. | [] | |
show l2-learning mac-move-buffer | show l2-learning mac-move-buffer
<brief | detail | extensive>
<active> | (MX Series routers only) Display action as a result of configuring the MAC address move feature. | [
{
"name": "none",
"desc": "Display action as a result of the MAC address move feature."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "active",
"desc": "(Optional) Display the... | view
Output Fields
Display action as a result of the MAC address move feature.
Sample Output
show l2-learning mac-move-buffer active
user@host> show l2-learning mac-move-buffer active
MAC Address: 00:00:00:00:01:01, VLAN Id: 0
Time Rec : 2012-06-25 06:23:41 Bridge Domain: bd10
Prev IFL : ge-1/... | Command introduced in Junos OS Release 9.4. | [] | |
show l2-learning redundancy-groups | show l2-learning redundancy-groups
logical-system [system-name | all]
<redundancy-group-id [0 to 4294967294]>
arp-statistics
nd-statistics
remote-macs | (MX Series routers only) Display ARP statistics, Neighbor Discovery statistics, or remote MAC addresses
for the Multi-Chassis Aggregated Ethernet (MC-AE) nodes for all or specified redundancy groups on a
router or switch or logical systems on a router or switch. Note that the Redundancy Group ID is
inherited by the bri... | [
{
"name": "logical-system [system-name | all]",
"desc": "(Optional) Display information for a specified logical system or all systems."
},
{
"name": "redundancy-group-id",
"desc": "(Optional) The redundancy group identification number. The Inter-Chassis Control Protocol (ICCP) uses the redundanc... | view
Output Fields
Output fields are listed in the approximate order in which they appear.
Table 809: show l2-learning redundancy-groups arp-statistics Output Fields
Field Name
Field Description
Redundancy Group
ID
Redundancy Group to which the following details apply.
MCLAG ARP
Statistics Group ID
ARP statistics for t... | Command introduced in Junos OS Release 13.2.
Support for logical systems added in Junos OS Release 14.1. | [
"Forcing MC-LAG Links or Interfaces with Limited LACP Capability to Be Up",
"Configuring Active-Active Bridging and VRRP over IRB in Multichassis Link Aggregation on MX",
"Series Routers and QFX Series Switches",
"Forcing MC-LAG Links or Interfaces with Limited LACP Capability to Be Up"
] | |
show l2circuit connections | show l2circuit connections
<brief | extensive | summary>
<down | up | up-down>
<history>
<interface interface-name>
<logical-system (all | logical-system-name)>
<neighbor neighbor>
<status> | Display status information about Layer 2 virtual circuits from the local provider edge (PE) router to its
neighbors. | [
{
"name": "none",
"desc": "Display standard information about Layer 2 virtual circuits on all interfaces for all neighbors."
},
{
"name": "brief | extensive | summary",
"desc": "(Optional) Display the specified level of output. Use history to display information about connection history. Use sta... | view
Output Fields
Table 812 on page 22740 lists the output fields for the show l2circuit connections command. Output fields
are listed in the approximate order in which they appear.
Table 812: show l2circuit connections Output Fields
Field Name
Field Description
Layer-2 Circuit
Connections
Displays the legends for con... | Command introduced before Junos OS Release 7.4.
Display enhancements in Junos OS Release 9.6.
Display enhancements in Junos OS Release 10.2.
Display enhancements in Junos OS Release 12.1.
Display enhancements in Junos OS Release 13.2. | [] | |
show l2pt interface | show l2pt interface
<brief | detail>
<interface-name> | Display information about the interfaces and protocols for which the device will use Layer 2 (L2)
protocol tunneling (L2PT) across destination encapsulation tunnels in an EVPN network. When the
device receives protocol control frames on the configured interfaces, the device transparently transmits
those frames across t... | [
{
"name": "(brief | detail)",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display information for L2PT over encapsulation tunnels for the specified interface. Without this option, the command displays L2PT information f... | view
Output Fields
Table 813: show l2pt interface Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the access interface on which you have configured L2PT over
encapsulation tunnels.
brief
detail
Destination
Either of the following:
•
When you enable L2PT over encapsulation tunnels, the desti... | Command introduced in Junos OS Release 24.2R1. | [
"Layer 2 Protocol Tunneling over VXLAN Tunnels in EVPN-VXLAN Bridged Overlay Networks"
] | |
show l2vpn connections | show l2vpn connections
<brief | extensive>
<down | up | up-down>
<history>
<instance instance>
<instance-history>
<local-site local-site>
<logical-system (all | logical-system-name)>
<remote-site remote-site>
<status>
<summary> | Display Layer 2 virtual private network (VPN) connections. | [
{
"name": "none",
"desc": "Display all Layer 2 VPN connections for all routing instances."
},
{
"name": "brief | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "down | up | up-down",
"desc": "(Optional) Display nonoperational, operational, or bot... | view
Output Fields
Table 814 on page 22754 lists the output fields for the show l2vpn connections command. Output fields are
listed in the approximate order in which they appear.
Table 814: show l2vpn connections Output Fields
Field Name
Field Description
Instance
Name of Layer 2 VPN instance.
L2vpn-id
For BGP autodis... | Command introduced before Junos OS Release 7.4.
instance-history option introduced in Junos OS Release 12.3R2. | [] | |
show lacp interfaces (View) | show lacp interfaces interface-name | Display Link Aggregation Control Protocol (LACP) information about the specified aggregated Ethernet
interface, redundant Ethernet interface, Gigabit Ethernet interface, or 10-Gigabit Ethernet interface. If
you do not specify an interface name, LACP information for all interfaces is displayed. | [
{
"name": "none",
"desc": "Display LACP information for all interfaces."
},
{
"name": "interface-name",
"desc": "(Optional) Display LACP information for the specified interface:"
},
{
"name": "Aggregated Ethernet",
"desc": "aenumber"
},
{
"name": "Redundant Ethernet",
"de... | view
Output Fields
Table 815 on page 22763 lists the output fields for the show lacp interfaces command. Output fields are
listed in the approximate order in which they appear.
Table 815: show lacp interfaces Output Fields
Field Name
Field Description
Aggregated interface
Aggregated interface value.
Table 815: show la... | Command modified in Junos OS Release 10.2. | [
"Verifying LACP on Redundant Ethernet Interfaces"
] | |
show lacp interfaces | show lacp interfaces
<interface-name>
extensive | Display Link Aggregation Control Protocol (LACP) information about the specified aggregated Ethernet,
Fast Ethernet, or Gigabit Ethernet interface. | [
{
"name": "none",
"desc": "Display LACP information for all interfaces."
},
{
"name": "interface-name",
"desc": "(Optional) Display LACP information for the specified interface:"
},
{
"name": "Aggregated Ethernet",
"desc": "aenumber"
},
{
"name": "Fast Ethernet",
"desc": ... | view
Output Fields
Table 816 on page 22769 lists the output fields for the show lacp interfaces command. Output fields are
listed in the approximate order in which they appear.
Table 816: show lacp interfaces Output Fields
Field Name
Field Description
Level of Outpu
LACP State
For a child interface configured with the ... | Command introduced in Junos OS Release 7.6.
extensive statement introduced in Junos OS Release 16.1R1. | [
"Configuring Aggregated Ethernet Links (CLI Procedure)",
"Configuring Link Aggregation",
"Configuring Aggregated Ethernet LACP (CLI Procedure)",
"Configuring Aggregated Ethernet LACP (CLI Procedure)",
"Configuring LACP Link Protection of Aggregated Ethernet Interfaces for Switches",
"Understanding Aggrega... | |
show lacp statistics interfaces (View) | show lacp statistics interfaces interface-name | Display Link Aggregation Control Protocol (LACP) statistics about the specified aggregated Ethernet
interface or redundant Ethernet interface. If you do not specify an interface name, LACP statistics for all
interfaces are displayed. | [
{
"name": "interface-name",
"desc": "(Optional) Name of an interface."
}
] | view
Output Fields
Table 817 on page 22776 lists the output fields for the show lacp statistics interfaces command. Output
fields are listed in the approximate order in which they appear.
Table 817: show lacp statistics interfaces Output Fields
Field Name
Field Description
Aggregated interface
Aggregated interface valu... | Command modified in Release 10.2 of Junos OS.
Command introduced in Release 11.1 of Junos OS. | [
"Verifying LACP on Redundant Ethernet Interfaces",
"Verifying the Status of a LAG Interface",
"Verifying That LACP Is Configured Correctly and Bundle Members Are Exchanging LACP Protocol",
"Packets",
"Example: Configuring Link Aggregation Between a QFX Series Product and an Aggregation Switch",
"Example: ... | |
show lacp timeouts | show lacp timeouts <interface-name> | In a fast timeout, PDUs are sent every second and in a slow timeout, PDUs are sent every 30 seconds.
LACP timeout occurs when 3 consecutive PDUs are missed. If LACP timeout is a fast timeout, the time
taken when 3 consecutive PDUs are missed is 3 seconds (3x1 second). If LACP timeout is a slow
timeout, the time taken i... | [
{
"name": "interface-name",
"desc": "(Optional) Display LACP information for the specified interface:"
},
{
"name": "Aggregated Ethernet",
"desc": "aenumber"
},
{
"name": "Fast Ethernet",
"desc": "fe-fpc/pic/port"
},
{
"name": "Gigabit Ethernet",
"desc": "ge-fpc/pic/port"... | [] | |||
show ldp database | show ldp database
<brief | detail | extensive>
<inet | l2circuit>
<instance instance-name>
<logical-system (all | logical-system-name)>
<p2mp>
<session session>
<summary> | Display entries in the LDP database. | [
{
"name": "none",
"desc": "Display standard information about all entries in the LDP database for all routing instances."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "inet | l2c... | view
Output Fields
Table 819 on page 22782 describes the output fields for the show ldp database command. Output fields
are listed in the approximate order in which they appear.
Table 819: show ldp database Output Fields
Field Name
Field Description
Level of Output
Input label
database
Label received from the other rou... | Command introduced before Junos OS Release 7.4.
summary option introduced in Junos OS Release 14.2. | [] | |
show ldp database-label-requests | show ldp database-label-requests
<brief | detail | extensive>
<inet | l2circuit>
<instance instance-name>
<logical-system (all | logical-system-name)>
<p2mp>
<session session> | Display entries in the LDP database label requests. | [
{
"name": "none",
"desc": "Display standard information about all entries in the LDP database for all routing instances."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "inet | l2c... | view
Output Fields
Table 820 on page 22796 describes the output fields for the show ldp database-label-requests command.
Output fields are listed in the approximate order in which they appear.
Table 820: show ldp database-label-requests Output Fields
Field Name
Field Description
Level of Output
Input label
database
Lab... | Statement introduced in Junos OS Release 20.3R1. | [] | |
show ldp fec-filters | show ldp fec-filters
<fec>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display information about configured Label Distribution Protocol (LDP) forwarding equivalence class
(FEC) filters. | [
{
"name": "fec",
"desc": "(Optional) Display FEC filter information for the specified FEC."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display FEC filter information for the specified instance."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Opti... | view
Output Fields
Table 821 on page 22798 lists the output fields for the show ldp fec-filters command. Output fields are
listed in the approximate order in which they appear.
Table 821: show ldp fec-filters Output Fields
Field Name
Field Description
Ingress
Names of the FEC filters on the ingress routers.
Transit
Nam... | Command introduced before Junos OS Release 7.4. | [] | |
show ldp interface | show ldp interface
<brief | detail | extensive>
<interface-name>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display the status of Label Distribution Protocol (LDP)-enabled interfaces. | [
{
"name": "none",
"desc": "Display standard status information about all LDP-enabled interface for all routing instances."
},
{
"name": "interface-name",
"desc": "(Optional) Display information for the specified interface."
},
{
"name": "brief | detail | extensive",
"desc": "(Optiona... | view
Output Fields
Table 822 on page 22800 describes the output fields for the show ldp interface command. Output fields
are listed in the approximate order in which they appear.
Table 822: show ldp interface Output Fields
Field Name
Field Description
Level of
Output
Interface
Interface name.
All levels
Label space ID
... | Command introduced before Junos OS Release 7.4. | [] | |
show ldp neighbor | show ldp neighbor
<brief | detail | extensive>
<auto-targeted>
<instance instance-name>
<logical-system (all | logical-system-name)>
<neighbor-address> | Display Label Distribution Protocol (LDP) neighbor information. | [
{
"name": "none",
"desc": "Display standard information about LDP neighbors for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "auto-targeted",
"desc": "(Optional) Display information about L... | view
Output Fields
Table 823 on page 22802 describes the output fields for the show ldp neighbor command. Output fields
are listed in the approximate order in which they appear.
Table 823: show ldp neighbor Output Fields
Field Name
Field Description
Level of Output
Address
IP address of the neighbor.
All levels
Interfa... | Command introduced before Junos OS Release 7.4.
neighbor-address option added in Junos OS Release 8.5. | [] | |
show ldp overview | show ldp overview
<instance instance-name> | Display LDP overview information. | [
{
"name": "none",
"desc": "Display standard overview information about LDP for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display LDP overview information for the specified routing instance."
},
{
"name": "logical-system (all |",
"desc": ""
}... | view
Output Fields
Table 824 on page 22806 lists the output fields for the show ldp overview command. Output fields are
listed in the approximate order in which they appear.
Table 824: show ldp overview Output Fields
Field Name
Field description
Level of Output
Instance
LDP routing instance.
All Levels
Router ID
Route... | Command introduced in Junos OS Release 11.2. | [] | |
show ldp p2mp fec | show ldp p2mp fec
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display Label Distribution Protocol (LDP) point-to-multipoint (P2MP) forwarding equivalence class (FEC)
information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display routing instance information for the specified instance only."
},
{
"name": "logical-system (all | logical-system-name)",... | view
Output Fields
Table 1 lists the output fields for the name-of-command command.
Table 825: name-of-command Output Fields
Field Name
Field Description
Level of Output
FEC
FEC for which LDP information is displayed.
For P2MP LSPs, FEC appears as a combination of root address and the
LSP ID (root_addr:lsp_id) or as a ... | Command introduced in Junos OS Release 15.1 | [
"No Link Title"
] | |
show ldp p2mp path | show ldp p2mp path
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display Label Distribution Protocol (LDP) point-to-multipoint (P2MP) label-switched paths (LSPs). | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display routing instance information for the specified instance only."
},
{
"name": "logical-system (all | logical-system-name)",... | view
Output Fields
Table 1 lists the output fields for the name-of-command command.
Table 826: name-of-command Output Fields
Field Name
Field Description
Level of Output
Output Session
(label)
Session ID and labels that this system has sent using LDP. These
correspond to MPLS packets received.
any
P2MP path type
Type ... | Command introduced in Junos OS Release 15.1 | [
"No Link Title"
] | |
show ldp p2mp tunnel | show ldp p2mp tunnel
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display LDP point-to-multipoint tunnel table information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display routing instance information for the specified instance only."
},
{
"name": "logical-system (all | logical-system-name)",... | View
Sample Output
show ldp p2mp tunnel
user@host> show ldp p2mp tunnel extensive
Instance Tunnel type Tunnel name
0 Name 10.254.1.1:1:ldp-p2mp:mvpn:vpn-1
P2MP root-addr 10.255.107.232, lsp-id 16777217
Self id 805306372
Reference count 2 | Command introduced in Junos OS Release 13.3. | [] | |
show ldp path | show ldp path
<brief | detail | extensive>
<destination>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display Label Distribution Protocol (LDP) label-switched paths (LSPs). | [
{
"name": "none",
"desc": "Display standard information about all LDP LSPs for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "destination",
"desc": "(Optional) Restrict the output to entries... | view
Output Fields
Table 827 on page 22820 describes the output fields for the show ldp path command. Output fields are
listed in the approximate order in which they appear.
Table 827: show ldp path Output Fields
Field Name
Field Description
Output Session
(label)
Session ID and labels that this system has sent using L... | Command introduced before Junos OS Release 7.4. | [] | |
show ldp rib-groups | show ldp rib-groups
<instance instance-name>
<logical-system (all | logical-system-name)> | Displays the rib group names. | [
{
"name": "instance instance-name",
"desc": "(Optional) Display routing instance information for the specified instance only."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on... | view
Output Fields
Table 828 on page 22822 describes the output fields for the show ldp rib-groups command. Output fields
are listed in the approximate order in which they appear.
Table 828: show ldp rib-groups Output Fields
Field Name
Field Description
Rib group name
Displays the name of Rib group.
Sample Output
show... | Statement introduced in Junos OS Release 20.3R1. | [] | |
show ldp route | show ldp route
<brief | detail | extensive>
<destination>
<fec-and-route>
<fec-only>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display the entries in the Label Distribution Protocol (LDP) internal topology table. The internal topology
table contains routes from inet.0 and inet.3 and is used when binding a label to a forwarding equivalence
class (FEC). | [
{
"name": "none",
"desc": "Display standard information about all entries in the LDP internal topology table for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "destination",
"desc": "(Option... | view
Output Fields
Table 829 on page 22825 describes the output fields for the show ldp route command. Output fields are
listed in the approximate order in which they appear.
Table 829: show ldp route Output Fields
Field Name
Field Description
Destination
Destination prefix.
Next-hop intf/lsp/table
Interface that is t... | Command introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 20.3R1. | [] | |
show ldp session | show ldp session
<brief | detail | extensive>
<auto-targeted>
<destination>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display information about Label Distribution Protocol (LDP) sessions. | [
{
"name": "none",
"desc": "Display standard information about all LDP sessions for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "auto-targeted",
"desc": "(Optional) Display information abou... | view
Output Fields
Table 830 on page 22836 describes the output fields for the show ldp session command. Output fields are
listed in the approximate order in which they appear.
Table 830: show ldp session Output Fields
Field Name
Field Description
Level of Output
Address
Transport address of the session.
any
State
Sta... | Command introduced before Junos OS Release 7.4. | [] | |
show ldp statistics | show ldp statistics
<instance instance-name>
<logical-system (all | logical-system-name)> | Display Label Distribution Protocol (LDP) statistics. | [
{
"name": "none",
"desc": "Display LDP statistics for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information for the specified routing instance only."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system... | view
Output Fields
Table 831 on page 22846 lists the output fields for the show ldp statistics command. Output fields are
listed in the approximate order in which they appear.
Table 831: show ldp statistics Output Fields
Field Name
Field Description
Total Sent,
Received
Total number of each message type sent and recei... | Command introduced before Junos OS Release 7.4. | [] | |
show ldp traffic-statistics | show ldp traffic-statistics
<instance instance-name>
<logical-system (all | logical-system-name)>
<p2mp> | Display Label Distribution Protocol (LDP) traffic statistics.
NOTE: If nonstop active routing features is configured, show ldp traffic-statistics
command is not supported on backup Routing Engines. | [
{
"name": "none",
"desc": "Display LDP traffic statistics for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display LDP traffic statistics for the specified routing instance only."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"nam... | view
Output Fields
Table 832 on page 22852 lists the output fields for the show ldp traffic-statistics command. Output
fields are listed in the approximate order in which they appear.
Table 832: show ldp traffic-statistics Output Fields
Field Name
Field Description
Message type
LDP message types.
FEC
Forwarding equival... | Command introduced before Junos OS Release 7.4.
p2mp option added in Junos OS Release 11.2. | [
"LDP Configuration"
] | |
show link-management peer | show link-management peer
<name peer-name> | Display Multiprotocol Label Switching (MPLS) peer link information. | [
{
"name": "none",
"desc": "Display all peer link information."
},
{
"name": "name peer-name",
"desc": "(Optional) Display information for the specified peer only."
}
] | view
Output Fields
Table 833 on page 22857 describes the output fields for the show link-management peer command. Output
fields are listed in the approximate order in which they appear.
Table 833: show link-management peer Output Fields
Field Name
Field Description
Peer Name
Name of the peer.
System identifier
Internal... | Command introduced before Junos OS Release 7.4. | [] | |
show link-management routing | show link-management routing
<peer <name name> | te-link <name name>>
<resource <name name>> | Display Multiprotocol Label Switching (MPLS) peer or traffic engineering link information from the
routing process. | [
{
"name": "none",
"desc": "Display all peer and traffic-engineered link information."
},
{
"name": "peer <name name>",
"desc": "(Optional) Display information for all peers or for the specified peer only."
},
{
"name": "resource <name",
"desc": ""
},
{
"name": "name>",
"d... | view
Output Fields
Table 834 on page 22860 describes the output fields for the show link-management routing command.
Output fields are listed in the approximate order in which they appear.
Table 834: show link-management routing Output Fields
Field Name
Field Description
Peer Name
Name of the peer.
Table 834: show lin... | Command introduced before Junos OS Release 7.4. | [] | |
show link-management statistics | show link-management statistics
<peer <name name>> | Display statistical information for Link Management Protocol (LMP) packets. | [
{
"name": "none",
"desc": "Display information for all peers."
},
{
"name": "peer <name name>",
"desc": "(Optional) Display information for all peers or for the specified peer only."
}
] | view
Output Fields
Table 835 on page 22865 describes the output fields for the show link-management statistics command.
Output fields are listed in the approximate order in which they appear.
Table 835: show link-management statistics Output Fields
Field Name
Field Description
Received packets
Number of received packet... | Command introduced in Junos OS Release 8.0. | [] | |
show link-management te-link | show link-management te-link
<brief | detail>
<name name> | Display the resources used to set up Multiprotocol Label Switching (MPLS) traffic-engineered forwarding
paths. | [
{
"name": "none",
"desc": "Display information for all traffic-engineered links."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "name name",
"desc": "(Optional) Display information for the specified traffic-engineered link onl... | view
Output Fields
Table 836 on page 22868 describes the output fields for the show link-management te-link command.
Output fields are listed in the approximate order in which they appear.
Table 836: show link-management te-link Output Fields
Field Name
Field Description
TE link name
Traffic-engineered link name.
State... | Command introduced before Junos OS Release 7.4. | [] | |
show link-management | show link-management | Display Multiprotocol Label Switching (MPLS) peer and traffic engineering link information. | [] | view
Output Fields
Table 837 on page 22872 describes the output fields for the show link-management command. Output fields
are listed in the approximate order in which they appear.
Table 837: show link-management Output Fields
Field Name
Field Description
Peer Name
Name of the peer.
System identifier
Internal identifie... | Command introduced before Junos OS Release 7.4. | [] | |
show lldp local-information | show lldp local-information | Display the information that the switch provides in Link Layer Discovery Protocol (LLDP) advertisements
to its neighbors. | [] | view
Output Fields
Table 838 on page 22876 lists the output fields for the show lldp local-information command. Output
fields are listed in the approximate order in which they appear.
Table 838: show lldp local-information Output Fields
Field Name
Field Description
LLDP Local
Information details
Information about the l... | Command introduced in Junos OS Release 9.0. | [
"Configuring LLDP (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches",
"Understanding LLDP"
] | |
show lldp neighbors | show lldp neighbors
<interface interface-name>
detail | Display information about LLDP neighbors.
For information about extended port names in the Junos Fusion technology, see Understanding Junos
Fusion Ports.
NOTE: When a port with DCBX enabled begins to exchange type, length, and value
(TLV) entries, optional LLDP TLVs on that port are not advertised to neighbors in order... | [
{
"name": "none",
"desc": "Display learned LLDP information on all neighboring interfaces and devices."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display the neighbor information about a particular physical interface."
},
{
"name": "detail",
"desc": "(Optional) Dis... | view
Output Fields
Table 839 on page 22880 describes the output fields for the show lldp neighbors command. Output fields
are listed in the approximate order in which they appear.
Table 839: show lldp neighbors Output Fields
Field Name
Field Description
LLDP Remote Devices
Information
Information about remote devices.
... | Command introduced in Junos OS Release 9.6.
detail option introduced in Junos OS Release 19.1R2. | [
"Understanding LLDP",
"Configuring LLDP (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches"
] | |
show lldp neighbors-vlan-name-tlv-list interface | show lldp neighbors-vlan-name-tlv-list interface <name> | Display the VLAN Name TLVs information about neighboring devices learned by the device by using the
Link Layer Discovery Protocol (LLDP). | [] | view
Sample Output
user@switch> show lldp neighbors-vlan-name-tlv-list interface <name>
Organization Info
OUI : Ethernet Bridged (0x0080c2)
Subtype : VLAN Name (3)
Vlan-id Vlan-name Index
100 vlan-100 7
101 vlan-101 8
102 vlan-102 9
103 ... | Command introduced in Junos OS Release 22.4R1. | [
"Configuring the Transmission of Maximum VLAN Name TLVs in LLDP",
"Configuring LLDP (CLI Procedure)",
"Understanding LLDP"
] | |
show lldp remote-global-statistics | show lldp remote-global-statistics | Display remote Link Layer Discovery Protocol (LLDP) global statistics. | [] | view
Output Fields
Table 840 on page 22898 describes the output fields for the show lldp remote-global-statistics command.
Output fields are listed in the approximate order in which they appear.
Table 840: show lldp remote-global-statistics Output Fields
Field Name
Field Description
LLDP Remote
Database Table
Counters
... | Command introduced in Junos OS Release 9.6. | [
"Configuring LLDP (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches"
] | |
show lldp statistics | show lldp statistics
<interface interface-name> | Display information about Link Layer Discovery Protocol (LLDP) statistics. | [
{
"name": "none",
"desc": "Display LLDP statistics on all interfaces and devices."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display LLDP statistics for the specified physical interface."
}
] | view
Output Fields
Table 841 on page 22901 describes the output fields for the show lldp statistics command. Output fields
are listed in the approximate order in which they appear.
Table 841: show lldp statistics Output Fields
Field Name
Field Description
Interface
Interface name.
For information about extended port n... | Command introduced in Junos OS Release 9.0. | [
"Configuring LLDP (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches"
] | |
show lldp | show lldp
<detail> | Port ID TLVDisplay information about Link Layer Discovery Protocol (LLDP) and Link Level Discovery
Protocol–Media Endpoint Discovery (LLDP-MED) configuration and capabilities on the switch. LLDP and
LLDP-MED are used to learn about and to distribute device information on network links. | [
{
"name": "none",
"desc": "Display LLDP information for all interfaces."
},
{
"name": "detail",
"desc": "(Optional) Display detailed LLDP information for all interfaces."
}
] | view
Output Fields
Table 842 on page 22904 lists the output fields for the show lldp command. Output fields are listed in the
approximate order in which they appear.
Table 842: show lldp Output Fields
Field Name
Field Description
Level of Output
LLDP
LLDP operating state. The state can be enabled or disabled.
NOTE: If ... | Command introduced in Junos OS Release 9.0. | [
"Configuring LLDP (CLI Procedure)",
"Configuring LLDP-MED (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches",
"Understanding LLDP"
] | |
show log | show log
<all-lcc | lcc number | scc>
<filename | user <username>> | List log files, display log file contents, or display information about users who have logged in to the
router or switch.
NOTE: On MX Series routers, modifying a configuration to replace a service interface
with another service interface is treated as a catastrophic event. When you modify a
configuration, the entire c... | [
{
"name": "none",
"desc": "List all log files."
},
{
"name": "<all-lcc | lcc",
"desc": ""
},
{
"name": "number | scc>",
"desc": "(Routing matrix only)(Optional) Display logging information about all T640 routers (or line-card chassis) or a specific T640 router (replace number with a ... | trace
Sample Output
show log
user@host> show log
total 57518
-rw-r--r-- 1 root bin 211663 Oct 1 19:44 dcd
-rw-r--r-- 1 root bin 999947 Oct 1 19:41 dcd.0
-rw-r--r-- 1 root bin 999994 Oct 1 17:48 dcd.1
-rw-r--r-- 1 root bin 238815 Oct 1 19:44 rpd
-rw-r--r-- 1 root bin 1049098 Oct 1 ... | Command introduced before Junos OS Release 7.4.
Option device-type (device-id | device-alias) is introduced in Junos OS Release 13.1 for the QFX Series. | [
"syslog (System)"
] | |
show loop-detect enhanced interface | show loop-detect enhanced interface
<interface-name> | Display status information about leaf device logical interfaces with lightweight provider edge (PE) to
customer edge (CE) loop detect enabled in a Layer 2 network. We also call this feature lightweight leaf
to server loop detect, lightweight PE-CE loop detect, or enhanced loop detect.
You can configure the lightweight ... | [
{
"name": "interface-name",
"desc": "Display loop detect status for the specified logical interface. If you don't specify an interface name, this command displays loop detect status for all logical interfaces that have this feature enabled."
}
] | view
Output Fields
Table 843: show loop-detect enhanced interface Output Fields
Field Name
Field Description
Interface
Local interface name with loop detect configured.
Vlan-id
•
vlan-id—Local interface VLAN ID for which loop detect is configured.
•
all—All VLAN IDs on the local interface.
ESI
Ethernet Segment ID (ESI)... | Command introduced in Junos OS Release 20.4R1. | [
"EVPN-VXLAN Lightweight Leaf to Server Loop Detection"
] | |
show mac-rewrite interface | show mac-rewrite interface
<brief | detail>
<interface-name> | Display Layer 2 protocol tunneling (L2PT) information.
NOTE: The implementation of L2PT over VXLAN tunnels for EVPN-VXLAN networks
doesn't do MAC rewrite operations for the protocol frame tunneling. To verify operation
when you enable L2PT over VXLAN, use the "show l2pt interface" on page 22749
command instead of this... | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display L2PT information for the specified interface."
}
] | view
Output Fields
Table 844 on page 22929 lists the output fields for the show mac-rewrite interface command. Output fields
are listed in the approximate order in which they appear.
Table 844: show mac-rewrite interface Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the interface on which... | Command introduced in Junos OS Release 9.1.
Command introduced in Junos OS Release 14.1X53-D10 and 17.3R1 for EX4300 switches.
Command introduced in Junos OS Release 15.1X53-D55 and 18.2R1 for EX2300 and EX3400 switches. | [
"Understanding Layer 2 Protocol Tunneling",
"Configuring Layer 2 Protocol Tunneling"
] | |
show mac-vrf forwarding flood | show mac-vrf forwarding flood
<brief | detail | extensive>
<event-queue>
<instance instance-name>
<route (all-ce-flood | all ve-flood | alt-root-flood | bd-flood | mlp-flood | re-flood)>
<vlan-name vlan-name> | Show Ethernet-switching flooding information for the bridging or switching instances.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-vrf forwardi... | [
{
"name": "none",
"desc": "Display all Ethernet-switching flooding information for all VLANs."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "event-queue",
"desc": "(Optional) Display the queue of pending Ethernet-... | view
Output Fields
"show mac-vrf forwarding flood" on page 22931 lists the output fields for the show mac-vrf forwarding
flood command.
Table 845: show mac-vrf forwarding flood Output Fields
Field Name
Field Description
Name
Name of the switching instance
CEs
Number of customer edge routers or switches
VEs
Number of VP... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding flood-group | show mac-vrf forwarding flood-group
<eamnh>
<instance instance name> | Display flood-group information for all active MAC-VRF instances.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-vrf forwarding age is available ... | [
{
"name": "none",
"desc": "Display flood-group information for the MAC-VRF instance."
},
{
"name": "eamnh",
"desc": ""
},
{
"name": "(Optional)",
"desc": ""
},
{
"name": "instance <instance-name> | bd-index",
"desc": ""
},
{
"name": "<bridge-domain-index-id>",
... | view
Output Fields
Table 846: show mac-vrf forwarding flood-group Output Fields
Field Name
Field Description
Bd Name
Bridge domain name
Eamnh
Enhanced mesh group and next hop information
Fgrp Flag
Flood group flag
Table 846: show mac-vrf forwarding flood-group Output Fields (Continued)
Field Name
Field Description
Fla... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding global-information | show mac-vrf forwarding global-information | Display global process and configuration information about the MAC-VRF subsystems.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-vrf forwarding ... | [] | view
Output Fields
Table 847: show mac-vrf forwarding global-information Output Fields
Field Name
Field Description
MAC aging interval
How fast learned MAC address entries age out of the table (in seconds)
MAC learning
Allow MAC learning—enabled or disabled
MAC statistics
Keep MAC statistics—enabled or disabled
MAC lim... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding global-mac-count | show mac-vrf forwarding global-mac-count | Display the number of globally-learned Layer 2 MAC addresses.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-vrf forwarding age is available only... | [] | view
Sample Output
show mac-vrf forwarding global-mac-count
user@host> show mac-vrf forwarding global-mac-count
1032 dynamic and static MAC addresses learned globally | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding global-mac-ip-count | show mac-vrf forwarding global-mac-ip-count | Display the number of globally-learned MAC address to IP address binding count. The first column of
output shows the number of MAC addresses that the device can learn. The second column shows the
number of IP addresses that are bound to learned MAC addresses. | [] | view
Sample Output
show mac-vrf forwarding global-mac-ip-count
user@r1_dc1_spine1> show mac-vrf forwarding global-mac-ip-count
735 MAC+IP bindings learned globally | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding instance | show mac-vrf forwarding instance
<brief|detail|extensive>
<vlan-name vlan name> | Display the MAC-IP addresses for all IPv4 (ARP) and IPv6 (ND) bindings for VLANs in routing instances
where the instance type is MAC-VRF.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the... | [
{
"name": "none",
"desc": "Display the brief listing of MAC-IP addresses for all IPv4 (ARP) and IPv6 (ND) bindings for VLANs in routing instances where the instance type is MAC-VRF."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
... | view
Output Fields
Table 848: show mac-vrf forwarding instance Output Fields
Field Name
Field Description
Instance type
Routing instance type
Logical system
Name of the logical system associated with the routing instance
Routing instance
Name of the routing instance
VLAN name
Name of the associated VLAN
Index
Routing ... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding instance-mapping | show mac-vrf forwarding instance-mapping
<brief|detail>
<forwarding-instance-id forwarding instance id number> | Display information about the mapping of configured MAC-VRF instances to forwarding instances. | [
{
"name": "none",
"desc": "Display brief information about the mapping of the global MAC-VRF instance to the forwarding instance."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of detail."
},
{
"name": "forwarding-instance-id",
"desc": ""
},
{
... | view
Output Fields
Table 849: show mac-vrf forwarding instance-mapping Output Fields
Field Name
Field Description
Forwarding-instance-
id
Configuration ID for the MAC-VRF routing instance—Id 0 is reserved for the default-
switch instance. The output displays other ID numbers only if you've configured the IDs
using the ... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding interface | show mac-vrf forwarding interface
<brief | detail | extensive>
<interface-name> | Show Ethernet switching information about all the interfaces within all active MAC-VRF routing
instances. | [
{
"name": "none",
"desc": "Show brief Ethernet switching information about all the interfaces within all MAC-VRF routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Show the specified level of output."
},
{
"name": "interface-name",
"desc": "(Optional) ... | view
Output Fields
Table 850: show mac-vrf forwarding interface Output Fields
Field Name
Field Description
Routing instance
name
Name of the mac-vrf routing instance.
Logical interface
Logical interface name associated with the mac-vrf routing instance
VLAN members
For aggregated Ethernet (ae) interfaces, this lists th... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding mac-ip-table | show mac-vrf forwarding mac-ip-table
<brief | count | detail | extensive>
<age>
<instance>
<ipv4>
<ipv6>
<kernel >
<vlan-name (all | vlan-name)> | Display the MAC-IP address for all IPv4 (ARP) and IPv6 (ND) bindings for VLANs in MAC-VRF type
routing instances.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific subcommand or option, when you run the
command, the output is empty. For exa... | [
{
"name": "none",
"desc": "Display brief information about the MAC-IP table."
},
{
"name": "brief | count | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "age",
"desc": "(Optional) (For MX Series r... | view
Output Fields
Table 851: show mac-vrf forwarding mac-ip-table Output Fields
Field Name
Field Description
Level of Output
IP address
IP address associated with the
EVPN routing instance.
All levels
MAC address
MAC address
All levels
Table 851: show mac-vrf forwarding mac-ip-table Output Fields (Continued)
Field N... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding mac-table | show mac-vrf forwarding mac-table
<brief | count | detail | extensive>
<mac address>
<age>
<instance vrf-instance-name>
<vlan-name vlan-name>
<vlan-id vlan-id>
<interface interface-name> | MAC flags
Flags that provide information about the MAC
addresses in the MAC-VRF instance.
•
S—Statically installed MAC-IP address entries.
•
D—Dynamic installed MAC-IP address entries.
•
L—Locally learned MAC-IP address entries
•
R— MAC-IP address entries that are learned from a
remote device through the control plane.... | [
{
"name": "none",
"desc": "(Same as brief) Display information about the MAC-VRF forwarding MAC table."
},
{
"name": "brief | count | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "mac-address",
"d... | view
Output Fields
Table 852 on page 22968 lists the output fields for the show mac-vrf forwarding mac-table command.
Table 852: show mac-vrf forwarding mac-table Output Fields
Field Name | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding mgrp-policy | show mac-vrf forwarding mgrp-policy
<instance instance-name>
<instance instance-name mgrp-id mgrp-id> | Display information about logical mesh groups, which are part of a mechanism that Juniper Networks
uses to control the flooding of broadcast, unknown unicast, and multicast (BUM) traffic.
You can assign all interfaces that you configure on a spine or super spine device to a particular mesh
group. We support the followi... | [
{
"name": "none",
"desc": "Display the global mesh group policy."
},
{
"name": "instance routing instance",
"desc": ""
},
{
"name": "name",
"desc": "(Optional) Display the mesh group policy for the specified routing instance."
},
{
"name": "mgrp-id mesh group id",
"desc":... | admin
Output Fields
Table 853 on page 22973 lists the output fields for the show mac-vrf forwarding mgrp-policy command.
Table 854 on page 22973 lists the output fields for the show mac-vrf forwarding mgrp-policy instance
command.
Table 855 on page 22973 lists the output fields for the show mac-vrf forwarding mgrp-pol... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding statistics | show mac-vrf statistics
<instance instance-name>
<vlan-name vlan-name> | Broadcast packets
Count of broadcast packets forwarded on the specified
interface.
Broadcast bytes
Count of broadcast bytes forwarded on the specified
interface
Multicast packets
Count of multicast packets forwarded on the specified
interface.
Multicast bytes
Count of multicast bytes forwarded on the specified
interfac... | [
{
"name": "none",
"desc": "Display bridge statistics for all VLANs in all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display statistics for the specified routing instance."
},
{
"name": "vlan-name vlan-name",
"desc": "(Optional) Display statistics ... | view
Output Fields
Table 856: Output Fields
Field Name | Command introduced in Junos OS Release 20.4. | [] | |
show mac-vrf forwarding vlans | show mac-vrf forwarding vlans
<brief | detail | extensive>
<instance instance-name>
<operational>
<vlan-name>
<interface interface-name> | Display information about VLANs configured on mac-vrf routing instances.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-vrf forwarding age is ava... | [
{
"name": "none",
"desc": "Display brief information for all VLANs."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information about the specified routing insta... | view
Output Fields
Table 857: show mac-vrf forwarding vlans Output Fields
Field Name
Field Description
Level of Output
VLAN name
Name of the VLAN.
none, brief
Tag
802.1Q tag applied to this VLAN. If none is displayed, no tag is applied.
All levels
Interfaces
Interface associated with learned MAC addresses or All-member... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding vxlan-tunnel-end-point esi | show mac-vrf forwarding vxlan-tunnel-end-point esi
<esi-identifier esi-identifier>
<instance instance>
<svlbnh> | Displays the Ethernet segment identifier (ESI) information about VXLAN tunnel end-points (VTEPs).
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
command, the output is empty. For example, show mac-... | [
{
"name": "none",
"desc": "Display information about the VTEP."
},
{
"name": "esi-identifier",
"desc": ""
},
{
"name": "esi-identifier",
"desc": "(Optional) Display information about the specified Ethernet segment identified by the ESI value."
},
{
"name": "instance instance"... | view
Output Fields
Table 858: show mac-vrf forwarding vxlan-tunnel-end-point esi Output Fields
Field Name
Field Description
ESI
Ethernet segment identifier
Table 858: show mac-vrf forwarding vxlan-tunnel-end-point esi Output Fields (Continued)
Field Name
Field Description
RTT
Routing instance in which you have configu... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding vxlan-tunnel-end-point remote | show mac-vrf forwarding vxlan-tunnel-end-point remote
<detail>
<instance mac-vrf routing-instance name>
<ip remote vtep ip address>
<mac-table>
<summary>
<vtep-source-interface local vtep source interface ip address> | Display information about remote VXLAN tunnel endpoints (VTEPs).
By default, this command displays VTEP information for multiple MAC-VRF routing instances, if
configured.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or opti... | [
{
"name": "none",
"desc": "Display information about remote VTEPs associated with all MAC-VRF routing instances."
},
{
"name": "detail",
"desc": "Display information about remote VTEPs associated with all MAC-VRF routing instances."
},
{
"name": "instance mac-vrf routing-instance name",
... | view
Output Fields
Table 1 on page 22991 lists the output fields for the show mac-vrf forwarding vxlan-tunnel-end-point remote
command.
Table 2 on page 22992 lists the output fields for the show mac-vrf forwarding vxlan-tunnel-end-point remote
instance command.
Table 3 on page 22993 lists the output fields for the sho... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mac-vrf forwarding vxlan-tunnel-end-point svlbnh | show mac-vrf forwarding vxlan-tunnel-end-point svlbnh
<brief | detail | extensive>
<overflow>
<svlbnh-index index-number> | Display information about a shared VXLAN load-balancing next hop (SVLBNH) and the virtual tunnel
end-points (VTEPs) associated with the SVLBNH.
NOTE: We've implemented the show mac-vrf commands on all supported platforms. If a
particular platform doesn't support a specific sub-command or option, when you run the
comman... | [
{
"name": "none",
"desc": "(Same as brief) Display information for all SVLBNHs."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "overflow",
"desc": "(Optional) Display the pending requests for SVLBNH allocation."
... | view
Output Fields
Field Name
Field Description
SVLBNH index-number
Index number of the SVLBNH.
(Continued)
Field Name
Field Description
RVTEP count
Number of remote VTEPs associated with the SVLBNH.
ESI count
Number of Ethernet segment identifiers (ESIs) associated with the SVLBNH.
RVTEP-IP
IP address of the remote V... | Command introduced in Junos OS Release 20.4R1. | [] | |
show mld group | show mld group
<brief | detail>
<group-name>
<logical-system (all | logical-system-name)> | Display information about Multicast Listener Discovery (MLD) group membership.
(ACX7100 Routers as CPE) Displays monitoring information for multicast interfaces on customer
premises equipments (CPE) with user-plane configuration. | [
{
"name": "none",
"desc": "Display standard information about all MLD groups."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "group-name",
"desc": "(Optional) Display MLD information about the specified group."
},
{
"n... | view
Output Fields
Table 865 on page 23003 describes the output fields for the show mld group command. Output fields are
listed in the approximate order in which they appear.
Table 865: show mld group Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the interface that received the MLD membe... | Command introduced before Junos OS Release 7.4.
Command updated in Junos OS Release 24.4R1 to include multicast support monitoring for ACX7100
router interfaces. | [] | |
show mld interface | show mld interface
<brief | detail>
<interface-name>
<logical-system (all | logical-system-name)>
show mld interface (User Plane output for ACX7100)
Displays the following output in the user-plane for customer premise equipment (CPE).
user@UP1> show mld interface
Interface: pp0.3221225483
Querier: fe80::5668:adff:... | Display information about multipoint Listener Discovery (MLD)-enabled interfaces.
(ACX7100 Routers as CPE) Displays monitoring information for multicast interfaces on customer
premises equipments (CPE) with user-plane configuration. | [
{
"name": "none",
"desc": "Display standard information about all MLD-enabled interfaces."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface-name",
"desc": "(Optional) Display information about the specified interface."... | view
Output Fields
Table 866 on page 23011 describes the output fields for the show mld interface command. Output fields
are listed in the approximate order in which they appear.
Table 866: show mld interface Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the interface.
All levels
Table 8... | Command introduced before Junos OS Release 7.4.
Command updated in Junos OS Release 24.4R1 to include multicast support monitoring for ACX7100
router interfaces. | [] | |
show mld snooping evpn database | show mld snooping evpn database
<brief | detail>
<group>
<bridge-domain bridge-domain-id>
<instance routing-instance-name>
<interface interface-name>
<logical-system (logical-system-name | all)>
<vlan vlan-id> | Display MLD snooping information for IPv6 multicast forwarding in an EVPN network. | [
{
"name": "brief | detail",
"desc": "Level of output to display. The default output is the same as brief."
},
{
"name": "group",
"desc": "Display output only for the specified IPv6 multicast group IP address range."
},
{
"name": "bridge-domain",
"desc": "Display output only for the s... | routing
Output Fields
Table 867 on page 23018 lists the output fields for the show mld snooping evpn database command. Output
fields are listed in the approximate order in which they appear.
Table 867: show mld snooping evpn database Output Fields
Field Name
Field Description
Level of Output
Instance
Name of the EVPN r... | Introduced in Junos OS Release 18.4R1.
Introduced in Junos OS Release 19.4R2 on ACX Series routers. | [
"Configure Multicast Forwarding with MLD Snooping in an EVPN-MPLS Environment",
"Overview of Multicast Forwarding with IGMP or MLD Snooping in an EVPN-MPLS Environment"
] | |
show mld snooping evpn proxy | show mld snooping evpn proxy
<brief | detail>
<group ipv6-multicast-group-prefix>
<instance instance>
<vlan vlan-id> | Display MLD snooping proxy information in an EVPN network with IPv6 multicast traffic. | [
{
"name": "brief | detail",
"desc": "Show brief output (default) or more detailed output."
},
{
"name": "group ipv6-multicast-group-prefix",
"desc": "Show information for a particular multicast group IPv6 address or address range."
},
{
"name": "instance instance-name",
"desc": "Show... | view
Output Fields
Table 868: show igmp snooping evpn output fields
Field Name
Field Description
Output Level
Instance
EVPN instance name or "default-switch" for the default switch instance (where
supported).
All
Bridge Domain
Bridge domain or VLAN name.
All
Table 868: show igmp snooping evpn output fields (Continued)... | Introduced in Junos OS Release 18.2R1.
Flags output fields added in Junos OS and Junos OS Evolved Release 25.2R1. | [
"Overview of Multicast Forwarding with IGMP or MLD Snooping in an EVPN-MPLS Environment",
"Overview of Multicast Forwarding with IGMP Snooping or MLD Snooping in an EVPN-VXLAN",
"Environment",
"Optimized Inter-Subnet Multicast in EVPN Networks"
] | |
show mld snooping interface | show mld snooping interface
<brief | detail>
<instance routing-instance>
<interface-name>
<qualified-vlan vlan-name>
<vlan vlan-name> | Display MLD snooping information for an interface. | [
{
"name": "none",
"desc": "Display MLD snooping information for all interfaces on which MLD snooping is enabled."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "instance routing-instance",
"desc": "(Optio... | view
Output Fields
Table 869 on page 23025 lists the output fields for the show mld snooping interface command. Output
fields are listed in the approximate order in which they appear. Details may differ for EX switches and
MX routers.
Table 869: show mld snooping interface Output Fields
Field Name
Field Description
Le... | Command introduced in Junos OS Release 13.3. | [
"Verifying MLD Snooping on Switches",
"Configuring MLD Snooping on a Switch VLAN with ELS Support (CLI Procedure)"
] | |
show mld snooping membership | show mld snooping membership
<brief | detail>
<interface logical-interface-name>
<vlan (vlan-id | vlan-name) > | Display the multicast group membership information maintained by MLD snooping. | [
{
"name": "none",
"desc": "Display the multicast group membership information for all VLANs on which MLD snooping is enabled."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "interface interface-name",
"de... | view
Output Fields
Table 870 on page 23030 lists the output fields for the show mld snooping membership command. Output
fields are listed in the approximate order in which they appear.
Table 870: show mld snooping membership Output Fields
Field Name
Field Description
Level of Output
VLAN
Name of the VLAN.
All
Interfac... | Command introduced in Junos OS Release 12.1. | [
"Understanding MLD Snooping",
"Example: Configuring MLD Snooping on SRX Series Devices",
"Verifying MLD Snooping on EX Series Switches (CLI Procedure)",
"Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)"
] | |
show mld snooping statistics | show mld snooping statistics | Display MLD snooping statistics. | [] | view
Output Fields
Table 871 on page 23033 lists the output fields for the show mld snooping statistics command. Output
fields are listed in the approximate order in which they appear.
Table 871: show mld snooping statistics Output Fields
Field Name
Field Description
Bad length
MLD packet has illegal or bad length.
Ta... | Command introduced in Junos OS Release 12.1. | [
"Understanding MLD Snooping",
"Example: Configuring MLD Snooping on SRX Series Devices",
"Verifying MLD Snooping on EX Series Switches (CLI Procedure)"
] | |
show mld statistics | show mld statistics
<interface interface-name>
<logical-system (all | logical-system-name)> | Display information about Multicast Listener Discovery (MLD) statistics.
By default, Junos OS multicast devices collect statistics of received and transmitted MLD control
messages that reflect currently active multicast group subscribers.
MX series devices also automatically maintain continuous MLD statistics globally ... | [
{
"name": "none",
"desc": "Display MLD statistics for all interfaces. These statistics represent currently active subscribers."
},
{
"name": "continuous",
"desc": "(Optional) Display continuous MLD statistics that account for both past and current multicast group subscribers instead of the defau... | view
Output Fields
Table 872 on page 23038 describes the output fields for the show mld statistics command. Output fields
are listed in the approximate order in which they appear.
Table 872: show mld statistics Output Fields
Field Name
Field Description
MLD Packet Statistics...
Heading for MLD packet statistics for al... | Command introduced before Junos OS Release 7.4.
continuous option added in Junos OS Release 19.4R1 for MX Series routers.
Command updated in Junos OS Release 24.4R1 to include multicast support monitoring for ACX7100
router interfaces. | [] | |
show mld-snooping route | show mld-snooping route
<brief | detail>
<ethernet-switching | inet6>
<vlan (vlan-id | vlan-name)> | Display multicast route information maintained by MLD snooping. | [
{
"name": "none",
"desc": "Display route information for all VLANs on which MLD snooping is enabled."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "ethernet-switching",
"desc": "(Optional) Display inform... | view
Output Fields
Table 873 on page 23043 lists the output fields for the show mld-snooping route command. Output fields
are listed in the approximate order in which they appear.
Table 873: show mld-snooping route Output Fields
Field Name
Field Description
Table
Routing table ID for virtual routing instances.
Routing ... | Command introduced in Junos OS Release 12.1. | [
"Verifying MLD Snooping on EX Series Switches (CLI Procedure)",
"Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)"
] | |
show mld-snooping vlans | show mld-snooping vlans
<brief | detail>
<vlan vlan-name> | Display MLD snooping information for a VLAN or for all VLANs. | [
{
"name": "none",
"desc": "Display MLD snooping information for all VLANs on which MLD snooping is enabled."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "vlan vlan-name",
"desc": "(Optional) Display MLD... | view
Output Fields
Table 874 on page 23047 lists the output fields for the show mld-snooping vlans command. Output fields
are listed in the approximate order in which they appear.
Table 874: show mld-snooping vlans Output Fields
Field Name
Field Description
Level of
Output
VLAN
Name of the VLAN.
All levels
Interfaces
... | Command introduced in Junos OS Release 12.1. | [
"Verifying MLD Snooping on EX Series Switches (CLI Procedure)",
"Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)"
] | |
show modem wireless firmware | show modem wireless firmware interface-name | If the value of SIM user operation needed is Enter PUK, this is the number of unblock
attempts remaining before the modem is unusable. If the PUK is entered incorrectly ten
times, the SIM card must be returned to the service provider for reactivation.
Sample Output
show modem wireless firmware
user@host> show modem wir... | [
{
"name": "interface-name",
"desc": "The LTE interface is cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is"
}
] | view
Output Fields
Table 875 on page 23050 lists some of the output fields for the show modem wireless firmware command.
Output fields are listed in the approximate order in which they appear.
Table 875: show modem wireless firmware Output Fields
Field Name | Command introduced in Junos OS 15.1X49-D100 | [] | |
show modem wireless network | show modem wireless network interface-name | Display the status of the modem and the status of the network connection for the LTE Mini-PIM. | [
{
"name": "interface-name",
"desc": "The LTE interface is cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is"
}
] | view
Output Fields
Table 876 on page 23054 lists some of the output fields for the show modem wireless network command.
Output fields are listed in the approximate order in which they appear.
Table 876: show modem wireless network Output Fields
Field Name
Field Description
Current Modem Status
Status of the modem on th... | Command introduced in Junos OS Release 15.1X49-D100. | [] | |
show modem wireless profiles | show modem wireless profiles interface-name slot slot-number | Display the profiles configured on the LTE Mini-PIM. | [
{
"name": "interface-name",
"desc": "The LTE interface is cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is"
},
{
"name": "slot-number",
"desc": "The slot in which the SIM card is inserted. The value can be either 1 or 2."
}
] | view
Output Fields
Table 877 on page 23059 lists some of the output fields for the show modem wireless profiles command.
Output fields are listed in the approximate order in which they appear.
Table 877: show modem wireless profiles Output Fields
Field Name
Field Description
Max profiles
The maximum number of profiles... | Command introduced in Junos OS Release 15.1X49-D100. | [] | |
show monitor security flow | show monitor security flow | Display information about the security flow session monitoring. | [] | view
Output Fields
Lists the output fields for the show monitor security flow command. Output fields are listed in the
approximate order in which they appear.
Table 878: show monitor security flow Output Fields
Field Name
Field Description
Monitor security flow session
status
State of the security flow session monitori... | Command introduced in Junos OS Release 12.1X46-D10. This topic was updated to include the flow
session conn-tag filter in Junos OS Release 15.1X49-D70. | [
"Monitoring Security Flow Sessions Overview"
] | |
show mpls abstract-hop-membership | show mpls abstract-hop-membership
<abstract-hop-name>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display MPLS abstract hop membership tables for each abstract hop configured on the device. | [
{
"name": "none",
"desc": "(Optional) Display the MPLS abstract hop membership table for all the configured abstract hops on the router."
},
{
"name": "abstract-hop-name",
"desc": "(Optional) Display the MPLS abstract hop membership table for the specified abstract hop."
},
{
"name": "in... | view
Output Fields
Table 879 on page 23064 describes the output fields for the show mpls abstract-hop-membership command.
Output fields are listed in the approximate order in which they appear.
Table 879: show mpls abstract-hop-membership Output Fields
Field Name
Field Description
Abstract hop
Name of the abstract hop.... | Command introduced in Junos OS Release 17.1. | [
"Example: Configuring Abstract Hops for MPLS LSPs",
"abstract-hop"
] | |
show mpls admin-groups | show mpls admin-groups | Display information about configured Multiprotocol Label Switching (MPLS) administrative groups. | [
{
"name": "none",
"desc": "Display information about the configured MPLS administrative groups."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display MPLS administrative group information for the specified instance. If instance-name is omitted, MPLS administrative group information... | view
Output Fields
Table 880 on page 23067 describes the output fields for the show mpls admin-groups command. Output
fields are listed in the approximate order in which they appear.
Table 880: show mpls admin-groups Output Fields
Field Name
Field Description
Group
Name of the administrative group.
Bit index
Value assi... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls association | show mpls association (iif incoming-interface | oif outgoing-interface)
<logical-system (all | logical-system-name)> | Display the Multiprotocol Label Switching (MPLS) label-switched paths (LSPs) based on the association
with an incoming or outgoing LSP interface. The command output displays the list of RSVP-TE LSPs
carrying traffic in and out of the same interface. | [
{
"name": "iif incoming-interface-name",
"desc": "Display list of RSVP-TE LSPs that share the specified incoming interface to bring in traffic. This option works on transit label-switching routers (LSRs) and egress label edge routers (LERs)."
},
{
"name": "oif outgoing-interface-name",
"desc": "... | view
Output Fields
Table 881 on page 23069 describes the output fields for the show mpls association command. Output
fields are listed in the approximate order in which they appear.
Table 881: show mpls association Output Fields
Field Name
Field Description
To
Destination IP address of the corresponding LSP.
From
Sourc... | Command introduced in Junos OS Release 16.1 . | [] | |
show mpls call-admission-control | show mpls call-admission-control
<lsp-name> | Display Multiprotocol Label Switching (MPLS) label-switched path (LSP) call admission control (CAC)
information. | [
{
"name": "none",
"desc": "Display CAC information for all LSPs."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display MPLS LSP CAC information for the specified instance. If instance-name is omitted, MPLS LSP CAC information for the master instance is displayed."
},
{
"nam... | view
Output Fields
Table 882 on page 23072 describes the output fields for the show mpls call-admission-control command.
Output fields are listed in the approximate order in which they appear.
Table 882: show mpls call-admission-control Output Fields
Field Name
Field Description
Available bandwidth
Current available ba... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls container-lsp | show mpls container-lsp
<brief | detail | extensive | terse>
<count-active-routes>
<defaults>
<descriptions>
<down | up>
<egress>
<ingress>
<logical-system (all | logical-system-name)>
<name name>
<statistics>
<transit>
<unidirectional> | Display information about configured and active Multiprotocol Label Switching (MPLS) container label-
switched paths (LSPs). | [
{
"name": "none",
"desc": "Display standard information about all configured and active member LSPs of the container LSP."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | terse",
"desc": "(Optional) Display the specified level of output. The extensive option dis... | view
Output Fields
Table 883 on page 23076 describes the output fields for the show mpls container-lsp command. Output
fields are listed in the approximate order in which they appear.
Table 883: show mpls container-lsp Output Fields
Field Name
Field Description
Level of Output
Ingress LSP
Information about the member L... | Command introduced in Junos OS Release 14.2.
Statement introduced for QFX Switches in Junos OS Release 15.1X53-D30. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.