command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show mpls context-identifer | show mpls context-identifer
<brief | detail>
<logical-system (all | logical-system-name)>
<primary>;
<protector>; | Display information about configured egress protection context identifiers. | [
{
"name": "none",
"desc": "Display standard information about egress protection."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Opt... | view
Output Fields
Table 884 on page 23086 describes the output fields for the show mpls egress-protection detail command.
Output fields are listed in the approximate order in which they appear.
Table 884: show mpls lsp Output Fields
Field Name
Field Description
Level of Output
ID
Context identifier.
All levels
Type
In... | Command introduced in Junos OS Release 11.4R3. | [
"Example: Configuring Layer 3 VPN Egress Protection with RSVP and LDP",
"Example: Configuring MPLS Egress Protection for Layer 3 VPN Services"
] | |
show mpls correlation label | show mpls correlation label label-value
<brief | detail | extensive | terse>
<descriptions>
<logical-system (all | logical-system-name)> | Display the correlation information for the Multiprotocol Label Switching (MPLS) label-switched path
(LSP) with the owner of the label. | [
{
"name": "label-value",
"desc": "Display information about the specified label."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | terse",
"desc": "(Optional) Display the specified level of output. The extensive option displays the same information as the detail ... | view | Command introduced in Junos OS Release 15.2 . | [] | |
show mpls correlation nexthop-id | show mpls correlation nexthop-id nexthop-id
<descriptions>
<logical-system (all | logical-system-name)> | Display the correlation information for the Multiprotocol Label Switching (MPLS) label-switched path
(LSP) with the owner of the next-hop ID. | [
{
"name": "nexthop-id",
"desc": "Display information about the specified next-hop ID."
},
{
"name": "descriptions",
"desc": "(Optional) Display the LSP descriptions. To view this information, you must configure the description statement at the [edit protocol mpls lsp] hierarchy level. Only the L... | view
Output Fields
Table 885 on page 23090 describes the output fields for the show mpls correlation nexthop-id command.
Output fields are listed in the approximate order in which they appear.
Table 885: show mpls correlation nexthop-id Output Fields
Field Name
Field Description
LSP name
Name of the LSP associated with... | Command introduced in Junos OS Release 16.1 . | [] | |
show mpls cspf | show mpls cspf | Display Multiprotocol Label Switching (MPLS) Constrained Shortest Path First (CSPF) statistics. | [
{
"name": "none",
"desc": "Display MPLS CSFP statistics."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display MPLS CSPF information for the specified instance. If instance-name is omitted, MPLS CSPF information for the primary instance is displayed."
},
{
"name": "logical-... | view
Output Fields
Table 886 on page 23093 describes the output fields for the show mpls cspf command. Output fields are
listed in the approximate order in which they appear.
Table 886: show mpls cspf Output Fields
Field Name
Field Description
Queue length
Number of LSPs queued for automatic path computation.
current
... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls diffserv-te | show mpls diffserve-te | Display Multiprotocol Label Switching (MPLS) label-switched path (LSP) Differentiated Services
(DiffServ) class and preemption priority information. | [
{
"name": "none",
"desc": "Display DiffServ classes and priorities used by MPLS LSPs."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display DiffServ classes and priorities used by MPLS LSPs for the specified instance. If instance-name is omitted, DiffServ information for the master... | view
Output Fields
Table 887 on page 23096 describes the output fields for the show mpls diffserv-te command. Output
fields are listed in the approximate order in which they appear.
Table 887: show mpls diffserv-te Output Fields
Field Name
Field Description
Bandwidth model
Bandwidth constraint model supported. The max... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls egress-protection | show mpls egress-protection
<brief | detail>
<logical-system (all | logical-system-name)> | Display information about egress protection.
NOTE: Use this command on the device configured as the protector PE router to display
information about egress protection. If you use this command on the device configured
as the primary PE router, no output is displayed. | [
{
"name": "none",
"desc": "Display standard information about egress protection."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all lo... | view
Output Fields
Table 888 on page 23098 describes the output fields for the show mpls egress-protection detail command.
Output fields are listed in the approximate order in which they appear.
Table 888: show mpls lsp Output Fields
Field Name
Field Description
Instance
Indicates egress instance name
Type
Indicates ty... | Command introduced in Junos OS Release 11.4R3. | [
"Example: Configuring MPLS Egress Protection for Layer 3 VPN Services",
"Example: Configuring Layer 3 VPN Egress Protection with RSVP and LDP"
] | |
show mpls interface | show mpls interface | Display information about Multiprotocol Label Switching (MPLS)-enabled interfaces. | [
{
"name": "none",
"desc": "Display information about MPLS-enabled interfaces."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information about MPLS-enabled interfaces for the specified routing instance. If instance-name is omitted, information about MPLS-enabled interfaces i... | view
Output Fields
Table 889 on page 23101 describes the output fields for the show mpls interface command. Output fields
are listed in the approximate order in which they appear.
Table 889: show mpls interface Output Fields
Field Name
Field Description
Interface
Name of the interface.
State
State of the interface: Up ... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls label usage label-range | show mpls label usage label-range
<block-label-range range-start range-end>
<dynamic-label-range range-start range-end>
<label-limit label-limit value>
<lsi-label-range range-start range-end>
<static-label-range range-start range-end> | There are four different label spaces currently used in MPLS—namely LSI, dynamic, block, and static.
Each label space has a fixed number and cannot grow beyond the fixed value. Using show mpls label usage
label-range command, the administrator can monitor the available labels in each label space and the
applications th... | [
{
"name": "block-label-range range-start range-end",
"desc": "Display the details of block label type."
},
{
"name": "dynamic-label-range range-start range-end",
"desc": "Display the details of dynamic label type."
},
{
"name": "label-limit label-limit value",
"desc": "Limit for the ... | view
Output Fields
Table 890 on page 23105 describes the output fields for the show mpls label usage label-range command.
Output fields are listed in the order in which they appear.
Table 890: show mpls label usage label-range Fields
Field Name
Field Description
Label Space
Indicates the different types of labels curr... | Command introduced in Junos OS Release 17.2. | [] | |
show mpls label usage | show mpls label usage
<label label value>
<label-range range-start range-end>
<logical-system (all | logical-sytem-name)> | Show the available label space resource in RPD and also the applications that use the label space in RPD.
There are four different label spaces currently used in MPLS—namely LSI, dynamic, block, and static.
Each label space has a fixed number and cannot grow beyond the fixed value. Using this command, the
administrator... | [
{
"name": "none",
"desc": "Display the available labels in each label space and the applications using the labels."
},
{
"name": "label label value",
"desc": "(Optional) Display the information about which label value is used by which protocol, if any."
},
{
"name": "label-range range-st... | view
Output Fields
Table 891 on page 23108 describes the output fields for the show mpls label usage command. Output
fields are listed in the order in which they appear.
Table 891: show mpls label usage Fields
Field Name
Field Description
Label Space
Indicates the different types of labels currently used in MPLS.
Total... | Command introduced in Junos OS Release 15.1.
Support for the label statement added in Junos OS Release 17.2.
Support for the label-range statement added in Junos OS Release 17.2. | [] | |
show mpls lsp abstract-computation | show mpls lsp abstract-computation
<brief | detail | extensive>;
<logical-system (all | logical-system-name)>;
<name lsp-name>; | Display the ingress to egress abstract hop computation used by the constrained shortest path in the
preprocessing for LSPs. The command output displays the various computation passes involved per LSP,
and the qualifying exit devices for each pass. It also displays the affinity per pass, and the current start
device cho... | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the desired level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Display the abstract computation for abstract hop constraints on all logical systems or on a particular logical system.... | view
Output Fields
Table 892 on page 23112 describes the output fields for the show mpls lsp abstract-computation command.
Output fields are listed in the approximate order in which they appear.
Table 892: show mpls lsp abstract-computation Output Fields
Field Name
Field Description
Path computation using abstract hop... | Command introduced in Junos OS Release 17.1. | [
"Example: Configuring Abstract Hops for MPLS LSPs",
"abstract-hop"
] | |
show mpls lsp autobandwidth | show mpls lsp autobandwidth
<brief | detail | extensive>
<logical-system (all | logical-system-name)>
<name lsp-name> | Display automatic bandwidth information for the LSP(s).
After a Routing Engine switchover, the output of the show mpls autobandwidth command might not be up-
to-date, as the automatic bandwidth information for the LSP(s) is gathered by the new primary Routing
Engine during the first adjustment interval. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output. The extensive option displays the same information as the detail option, but covers the most recent 50 events."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system... | view
Output Fields
Table 893 on page 23115 describes the output fields for the show mpls lsp autobandwidth command. Output
fields are listed in the approximate order in which they appear.
Table 893: show mpls lsp autobandwidth Output Fields
Field Name
Field Description
Level of Output
To
Destination (egress routing dev... | Statement introduced in Junos OS Release 11.4.
Statement introduced in Junos OS Release 13.2X51-D15 for the QFX Series.
namelsp-name option introduced in Junos OS Release 18.1R1 for all platforms. | [
"Achieving a Make-Before-Break, Hitless Switchover for RSVP-signaled MPLS LSPs"
] | |
show mpls lsp | show mpls lsp
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<descriptions>
<down | up>
<externally-controlled>
<externally-provisioned>
<lsp-type>
<name name>
<p2mp>
<statistics>
<transit> | Display information about configured and active dynamic Multiprotocol Label Switching (MPLS) label-
switched paths (LSPs). | [
{
"name": "none",
"desc": "Display standard information about all configured and active dynamic MPLS LSPs."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | terse",
"desc": "(Optional) Display the specified level of output. The extensive option displays the same ... | view
Output Fields
Table 894 on page 23123 describes the output fields for the show mpls lsp command. Output fields are
listed in the approximate order in which they appear.
Table 894: show mpls lsp Output Fields
Field Name
Field Description
Level of Output
Ingress LSP
Information about LSPs on the ingress routing dev... | Command introduced before Junos OS Release 7.4.
defaults option added in Junos OS Release 8.5.
autobandwidth option added in Junos OS Release 11.4.
externally-controlled option added in Junos OS Release 12.3.
externally-provisioned option added in Junos OS Release 13.3.
instance instance-name option added in Junos OS R... | [
"clear mpls lsp",
"show mpls lsp autobandwidth"
] | |
show mpls path | show mpls path
<path-name> | Display dynamic Multiprotocol Label Switching (MPLS) label-switched paths (LSPs). | [
{
"name": "none",
"desc": "Display standard information about all MPLS LSPs."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display the dynamic MPLS LSP for the specified instance. If instance-name is omitted, dynamic MPLS LSP for the master instance is displayed."
},
{
"nam... | view
Output Fields
Table 895 on page 23150 describes the output fields for the show mpls path command. Output fields are
listed in the approximate order in which they appear.
Table 895: show mpls path Output Fields
Field Name
Field Description
Path name
Information about ingress LSPs. Each path has one line of output.
... | Command introduced before Junos OS Release 7.4.
instance instance-name option added in Junos OS Release 15.1. | [] | |
show mpls srlg | show mpls srlg
<logical-systems (all | logical-system-name)> | Display Shared Risk Link Group (SRLG) cost and value configuration information.
NOTE: If an SRLG is associated with a link that is used by an ingress LSP in the router,
then on deleting the SRLG configuration from that router, the SRLG gets removed from
the SRLG table only on the next reoptimization of the LSP. Until t... | [
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) View SRLG configuration information for all logical systems or a particular logical system."
}
] | view
Output Fields
Table 896 on page 23152 lists the output fields for the show mpls srlg command. Output fields are listed
in the approximate order in which they appear.
Table 896: show mpls srlg Output Fields
Field Name
Field Description
SRLG
Name of the SRLG.
Value
A group ID for the SRLG ranging from 1 through 4294... | Command introduced before Junos OS Release 11.4. | [
"Example: Configuring SRLG"
] | |
show mpls static-lsp | show mpls static-lsp
<brief | detail | extensive | terse>
<bypass>
<descriptions>
<down | up>
<ingress>
<instance instance-name>
<logical-system (all | logical-system-name)>
<lsp-type>
<name name>
<statistics>
<transit> | Display information about configured and active static Multiprotocol Label Switching (MPLS) label-
switched paths (LSPs). | [
{
"name": "none",
"desc": "Display standard information about all configured and active static MPLS LSPs."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | terse",
"desc": "(Optional) Display the specified level of output. The extensive option displays the same i... | view
Output Fields
Table 897 on page 23155 describes the output fields for the show mpls static-lsp command. Output fields
are listed in the approximate order in which they appear.
Table 897: show mpls static-lsp Output Fields
Field Name
Field Description
Level of Output
Ingress LSPs
Information about the static LSPs o... | Command introduced in Junos OS Release 10.1.
Command updated in Junos OS Release 14.1X53-D25 to accommodate the stitching feature of MPLS. | [] | |
show mpls tunnel manager statistics | show mpls tunnel-manager-statistics
<instance instance-name>
<logical-system (all | logical-system-name)> | Display a running counter of the number of Multiprotocol Label Switching (MPLS) label-switched paths
(LSPs) that have been updated in-place without any change to LSP identifier (ID) through in-place LSP
update and without any change to RSVP installed in the inet.3 routing table. | [
{
"name": "none",
"desc": "Display the number of LSPs that have been updated in-place without any change to LSP-ID."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display the count of the LSPs that have been updated in-place LSPs for the specified instance. If instance-name is omitt... | view
Output Fields
Table 898 on page 23159 describes the output fields for the show mpls mpls tunnel manager statistics
command. Output fields are listed in the approximate order in which they appear.
Table 898: show mpls tunnel manager statistics Output Fields
Field Name
Field Description
Level of Output
LSP make-befo... | Command introduced before Junos OS Release 20.4R1. | [] | |
show msdp source | show msdp source
<instance instance-name>
<logical-system (all | logical-system-name)>
<source-address> | Display multicast sources learned from Multicast Source Discovery Protocol (MSDP). | [
{
"name": "none",
"desc": "Display standard MSDP source information for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information for the specified instance only."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Option... | view
Output Fields
Table 899 on page 23161 describes the output fields for the show msdp source command. Output fields are
listed in the approximate order in which they appear.
Table 899: show msdp source Output Fields
Field Name
Field Description
Source address
IP address of the source.
Table 899: show msdp source Ou... | Command introduced before Junos OS Release 7.4. | [] | |
show msdp source-active | show msdp source-active
<brief | detail>
<group group>
<instance instance-name>
<local>
<logical-system (all | logical-system-name)>
<originator originator>
<peer peer-address>
<source source-address> | Display the Multicast Source Discovery Protocol (MSDP) source-active cache. | [
{
"name": "none",
"desc": "Display standard MSDP source-active cache information for all routing instances."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "group group",
"desc": "(Optional) Display source-active cache informat... | view
Output Fields
Table 900 on page 23164 describes the output fields for the show msdp source-active command. Output
fields are listed in the approximate order in which they appear.
Table 900: show msdp source-active Output Fields
Field Name
Field Description
Global active source
limit exceeded
Number of times all pe... | Command introduced before Junos OS Release 7.4. | [] | |
show msdp statistics | show msdp statistics
<instance instance-name>
<logical-system (all | logical-system-name)>
<peer peer-address> | Display statistics about Multicast Source Discovery Protocol (MSDP) peers. | [
{
"name": "none",
"desc": "Display statistics about all MSDP peers for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display statistics about a specific MSDP instance."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional)... | view
Output Fields
Table 901 on page 23168 describes the output fields for the show msdp statistics command. Output fields
are listed in the approximate order in which they appear.
Table 901: show msdp statistics Output Fields
Field Name
Field Description
Global active source limit
exceeded
Number of times all peers ha... | Command introduced before Junos OS Release 7.4. | [] | |
show msdp | show msdp
<brief | detail>
<instance instance-name>
<logical-system (all | logical-system-name)>
<peer peer-address> | Display Multicast Source Discovery Protocol (MSDP) information. | [
{
"name": "none",
"desc": "Display standard MSDP information for all routing instances."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display information for the specified instanc... | view
Output Fields
Table 902 on page 23173 describes the output fields for the show msdp command. Output fields are listed
in the approximate order in which they appear.
Table 902: show msdp Output Fields
Field Name
Field Description
Level of Output
Peer address
IP address of the peer.
All levels
Local address
Local ad... | Command introduced before Junos OS Release 7.4. | [] | |
show multi-chassis mc-lag configuration-consistency global-config | show multi-chassis mc-lag configuration-consistency global-config (brief | detail) | View configuration consistency check status for all committed global configuration related to MC-LAG
functionality, the consistency requirement (identical or unique), the enforcement level (mandatory or
desired), and the result of the configuration consistency check. The results are either pass or fail.
This command sh... | [
{
"name": "none",
"desc": "Display configuration consistency check status for all global configuration related to MC-LAG functionality."
}
] | view
Output Fields
Table 903 on page 23177 lists the output fields for the show multi-chassis mc-lag configuration-consistency
global-config command. Output fields are listed in the approximate order in which they appear.
Table 903: show multi-chassis mc-lag configuration-consistency global-config Output Fields
Output... | Command introduced in Junos OS Release 15.1X53-D60. | [] | |
show multi-chassis mc-lag configuration-consistency icl-config | show multi-chassis mc-lag configuration-consistency icl-config (brief | detail) | View configuration consistency check status for parameters related to the ICL, the consistency
requirement (identical or unique), the enforcement level (mandatory or desired), and the result of the
configuration consistency check. The results are either pass or fail. Some example of parameters related
to the ICL interf... | [
{
"name": "none",
"desc": "Display configuration consistency check status for MC-LAG parameters related to the interchassis control link."
}
] | view
Output Fields
Table 904 on page 23179 lists the output fields for the show multi-chassis mc-lag configuration-consistency
icl-config command. Output fields are listed in the approximate order in which they appear.
Table 904: show multi-chassis mc-lag configuration-consistency icl-config Output Fields
Output Field ... | Command introduced in Junos OS Release 15.1X53-D60. | [] | |
show multi-chassis mc-lag configuration-consistency list-of-parameters | show multichassis configuration-check list-of-parameters | Displays the list of MC-LAG parameters (referred to as configuration knobs in the CLI) that are checked
for consistency across MC-LAG peers. There are certain parameters that must identical and others that
must be unique on both peers. Enforcement of the consistency check for the parameters is either
mandatory or desir... | [] | view
Output Fields
Table 905 on page 23183 lists the output fields for the show multi-chassis mc-lag configuration-consistency
list-of-parameters command.
Table 905: show multi-chassis mc-lag configuration-consistency list-of-parameters Output Fields
Configuration Knob
Hierarchy
Consistency R
session-establishment-hol... | Command introduced in Junos OS Release 16.1R1. | [] | |
show multi-chassis mc-lag configuration-consistency mcae-config | show multi-chassis mc-lag configuration-consistency mcae-config (brief | detail) | View configuration consistency check status for committed parameters related to the multichassis
aggregated Ethernet interfaces, the consistency requirement (identical or unique), the enforcement level
(mandatory or desired), and the result of the configuration consistency check. The results are either pass
or fail.
Th... | [
{
"name": "none",
"desc": "Display configuration consistency check status for MC-LAG parameters related to the multichassis aggregated Ethernet interface."
}
] | view
Output Fields
Table 906 on page 23196 lists the output fields for the show multi-chassis mc-lag configuration-consistency
mcae-config command. Output fields are listed in the approximate order in which they appear.
Table 906: show multi-chassis mc-lag configuration-consistency mcae-config Output Fields
Output Fiel... | Command introduced in Junos OS Release 15.1X53-D60. | [] | |
show multi-chassis mc-lag configuration-consistency vlan-config | show multi-chassis mc-lag configuration-consistency vlan-config (brief | detail) | View configuration consistency check status for committed parameters related to MC-LAG VLAN
configuration, the consistency requirement (identical or unique), the enforcement level (mandatory or
desired), and the result of the configuration consistency check. The results are either pass or fail.
This command shows only ... | [
{
"name": "none",
"desc": "Display configuration consistency check status for MC-LAG parameters related to VLAN configuration."
}
] | view
Output Fields
Table 907 on page 23200 lists the output fields for the show multi-chassis mc-lag configuration-consistency
vlan-config command. Output fields are listed in the approximate order in which they appear.
Table 907: show multi-chassis mc-lag configuration-consistency vlan-config Output Fields
Output Fiel... | Command introduced in Junos OS Release 15.1X53-D60. | [] | |
show multi-chassis mc-lag configuration-consistency vrrp-config | show multi-chassis mc-lag configuration-consistency vrrp-config | View configuration consistency check status for committed parameters related to VRRP configuration,
the consistency requirement (identical or unique), the enforcement level (mandatory or desired), and the
result of the configuration consistency check. The results are either pass or fail.
This command shows only a subse... | [
{
"name": "none",
"desc": "Displays configuration consistency check status for MC-LAG parameters related to Virtual Router Redundancy Protocol (VRRP) configuration."
}
] | view
Output Fields
Table 908 on page 23203 lists the output fields for the show multi-chassis mc-lag configuration-consistency
vrrp-config command. Output fields are listed in the approximate order in which they appear.
Table 908: show multi-chassis mc-lag configuration-consistency vrrp-config Output Fields
Output Fiel... | Command introduced in Junos OS Release 15.1X53-D60. | [] | |
show multi-chassis mc-lag configuration-consistency | show multi-chassis mc-lag configuration-consistency (brief | detail) | Displays configuration consistency check status for various MC-LAG parameters .
NOTE: This command only displays MC-LAG parameters that are committed. | [
{
"name": "none",
"desc": "Display configuration consistency check status for various MC-LAG parameters."
}
] | view
Output Fields
Table 909 on page 23206 lists the output fields for the show multi-chassis mc-lag configuration-consistency
command. Output fields are listed in the approximate order in which they appear.
Table 909: show multi-chassis mc-lag configuration-consistency Output Fields
Output Field Name
Field Description... | Command introduced in Junos OS Release 16.1R1. | [] | |
show multicast backup-pe-groups | show multicast backup-pe-groups
<address pe-address>
<group group-name>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display backup PE router group information when ingress PE redundancy is configured. Ingress PE
redundancy provides a backup resource when point-to-multipoint LSPs are configured for multicast
distribution. | [
{
"name": "none",
"desc": "Display standard information about all backup PE groups."
},
{
"name": "address pe-address",
"desc": "(Optional) Display the groups that a PE address is associated with."
},
{
"name": "group group",
"desc": "(Optional) Display the backup PE group informatio... | view
Output Fields
Table 910 on page 23213 describes the output fields for the show multicast backup-pe-groups command.
Output fields are listed in the approximate order in which they appear.
Table 910: show multicast backup-pe-groups Output Fields
Field Name
Field Description
Backup PE Group
Group name.
Designated PE
... | Command introduced in Junos OS Release 9.0. | [] | |
show multicast ecid-mapping satellite | show multicast ecid-mapping satellite
<brief | detail | extensive>
<device-id device-id>
<ecid ecid>
<reference-id reference-id> | Displays entries in the satellite multicast ECID mapping database.
ECID database entries map a group of extended ports to an ECID value for the satellite devices in a
Junos Fusion. Each entry also records the next hop to reach the corresponding destination extended
ports. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "device-id device-ID",
"desc": "Display information from the ECID database for a specified satellite device ID."
},
{
"name": "ecid ecid",
"desc": "Display information fro... | view
Output Fields
Table 911 on page 23216 lists the output fields for the show multicast ecid-mapping satellite command.
Output fields are listed in the approximate order in which they appear.
Table 911: show multicast ecid-mapping satellite Command Output Fields
Field Name
Field Description
Level of Output
Satellite
... | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion",
"Egress (Local) Replication on the Satellite Devices"
] | |
show multicast flow-map | show multicast flow-map
<brief | detail> | Display configuration information about IP multicast flow maps. | [
{
"name": "none",
"desc": "Display configuration information about IP multicast flow maps on all systems."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform... | view
Output Fields
Table 912 on page 23221 describes the output fields for the show multicast flow-map command. Output
fields are listed in the approximate order in which they appear.
Table 912: show multicast flow-map Output Fields
Field Name
Field Description
Levels of Output
Name
Name of the flow map.
All levels
Po... | Command introduced in Junos OS Release 8.2. | [] | |
show multicast forwarding-cache statistics | show multicast forwarding-cache statistics
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)> | Display IP multicast forwarding cache statistics. | [
{
"name": "none",
"desc": "Display multicast forwarding cache statistics for all supported address families for all routing instances."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display multicast forwarding cache statistics for IPv4 or IPv6 family addresses, respectively."
},
{
"n... | view
Output Fields
Table 913 on page 23224 describes the output fields for the show multicast forwarding-cache statistics
command. Output fields are listed in the approximate order in which they appear.
Table 913: show multicast forwarding-cache statistics Output Fields
Field Name
Field Description
Instance
Name of th... | Command introduced in Junos OS Release 12.2.
Starting in Junos OS Release 16.1, output includes general and rendezvous-point tree (RPT) suppression
states. | [] | |
show multicast interface | show multicast interface | Display bandwidth information about IP multicast interfaces. | [
{
"name": "none",
"desc": "Display all interfaces that have multicast configured."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 914 on page 23227 describes the output fields for the show multicast interface command. Output
fields are listed in the approximate order in which they appear.
Table 914: show multicast interface Output Fields
Field Name
Field Description
Interface
Name of the multicast interface.
Maximum band... | Command introduced in Junos OS Release 8.3. | [] | |
show multicast mrinfo | show multicast mrinfo
<host> | Display configuration information about IP multicast networks, including neighboring multicast router
addresses. | [
{
"name": "none",
"desc": "Display configuration information about all multicast networks."
},
{
"name": "host",
"desc": "(Optional) Display configuration information about a particular host. Replace host with a hostname or IP address."
}
] | view
Output Fields
Table 915 on page 23230 describes the output fields for the show multicast mrinfo command. Output
fields are listed in the approximate order in which they appear.
Table 915: show multicast mrinfo Output Fields
Field Name
Field Description
source-address
Query address, hostname (DNS name or IP addres... | Command introduced before Junos OS Release 7.4. | [] | |
show multicast next-hops list | show multicast next-hops list
<next-hop-identifier> | Display Layer 3 (L3) multicast unilist next hop information. | [
{
"name": "next-hop-identifier",
"desc": "Display information for only the specified next hop ID."
}
] | view
Output Fields
Output fields are listed in the approximate order in which they appear.
Table 916: show multicast next-hops list Output Fields
Field Name
Field Description
ID
Multicast list next hop ID.
Refcount
Number of cache entries that are using this next hop.
Kernel Table Id
Kernel routing table ID.
Member Nex... | Command introduced in Junos OS Release 24.2R1. | [
"EVPN-VXLAN DCI Multicast with Enhanced OISM"
] | |
show multicast next-hops satellite | show multicast next-hops satellite | Display satellite multicast next-hop table information.
The output lists next-hops for all interfaces in the VPLS address family used in multicast replication. | [
{
"name": "brief | detail",
"desc": "(Optional) Output level is the same when either option or no option is specified."
}
] | view
Output Fields
Table 917 on page 23234 lists the output fields for the show multicast next-hops satellite command.
Output fields are listed in the approximate order in which they appear, although the display order varies
between the different levels of output.
Table 917: show multicast next-hops satellite Command O... | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion"
] | |
show multicast next-hops session | show multicast next-hops session
<session-identifier> | Show EVPN multicast next hop session information for designated forwarder (DF) status on multihomed
EVPN data center interconnect (DCI) gateway (iGW) devices that share an interconnect Ethernet
segment ID (I-ESI).
When you interconnect EVPN data centers, the multihomed iGW devices in an I-ESI have a designated
forwarde... | [
{
"name": "session-identifier",
"desc": "Display information only for the specified I-ESI multicast next hops session ID. You can specify one session identifier per instance of this command."
}
] | view
Output Fields
Output fields are listed in the approximate order in which they appear.
Table 918: show multicast next-hops session Output Fields
Field Name
Field Description
MCNH session ID
ID the control plane assigned internally to the multicast next hops session.
Role
Device role for the session:
•
EVPN DCI DF
•... | Statement introduced in Junos OS Release 24.2R1. | [
"EVPN-VXLAN DCI Multicast with Enhanced OISM"
] | |
show multicast next-hops | show multicast next-hops
<brief | detail>
<identifier-number>
<inet | inet6> | Display the entries in the IP multicast next-hop table. | [
{
"name": "none",
"desc": "Display standard information about all entries in the multicast next-hop table for all supported address families."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "terse",
"desc": "(Optional) Display the specified level of output. Use terse to dis... | view
Output Fields
Table 919 on page 23241 describes the output fields for the show multicast next-hops command. Output
fields are listed in the approximate order in which they appear.
Table 919: show multicast next-hops Output Fields
Field Name
Field Description
Family
Protocol family (such as INET).
ID
Next-hop ident... | Command introduced before Junos OS Release 7.4.
inet6 option introduced in Junos OS Release 10.0 for EX Series switches.
detail option display of next-hop ID number introduced in Junos OS Release 11.1 for M Series and
T Series routers and EX Series switches.
Support for bidirectional PIM added in Junos OS Release 12.1.... | [] | |
show multicast pim-to-igmp-proxy | show multicast pim-to-igmp-proxy
<instance instance-name> | Display configuration information about PIM-to-IGMP message translation, also known as PIM-to-IGMP
proxy. | [
{
"name": "none",
"desc": "Display configuration information about PIM-to-IGMP message translation for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display configuration information about PIM-to-IGMP message translation for a specific multicast instance."
... | view
Output Fields
Table 920 on page 23248 describes the output fields for the show multicast pim-to-igmp-proxy command.
Output fields are listed in the order in which they appear.
Table 920: show multicast pim-to-igmp-proxy Output Fields
Field Name
Field Description
Instance
Routing instance. Default instance is mast... | Command introduced in Junos OS Release 9.6.
instance option introduced in Junos OS Release 10.3.
instance option introduced in Junos OS Release 10.3 for EX Series switches. | [
"Configuring PIM-to-IGMP and PIM-to-MLD Message Translation"
] | |
show multicast pim-to-mld-proxy | show multicast pim-to-mld-proxy
<instance instance-name> | Display configuration information about PIM-to-MLD message translation, also known as PIM-to-MLD
proxy. | [
{
"name": "none",
"desc": "Display configuration information about PIM-to-MLD message translation for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display configuration information about PIM-to-MLD message translation for a specific multicast instance."
},... | view
Output Fields
Table 921 on page 23250 describes the output fields for the show multicast pim-to-mld-proxy command.
Output fields are listed in the order in which they appear.
Table 921: show multicast pim-to-mld-proxy Output Fields
Field Name
Field Description
Proxy state
State of PIM-to-MLD message translation, a... | Command introduced in Junos OS Release 9.6.
instance option introduced in Junos OS Release 10.3.
instance option introduced in Junos OS Release 10.3 for EX Series switches. | [] | |
show multicast route | show multicast route
<brief | detail | extensive | summary>
<active | all | inactive>
<group group>
<inet | inet6>
<instance (all | instance name)>
<regular-expression>
<source-prefix source-prefix> | Display the entries in the IP multicast forwarding table. You can display similar information with the show
route table inet.1 command.
NOTE: On all SRX Series Firewalls, when a multicast route is not available, pending
sessions are not torn down, and subsequent packets are queued. If no multicast route
resolve comes ... | [
{
"name": "none",
"desc": "Display standard information about all entries in the multicast forwarding table for all routing instances."
},
{
"name": "brief | detail | extensive |",
"desc": ""
},
{
"name": "summary",
"desc": "(Optional) Display the specified level of output."
},
{... | view
Output Fields
Table 922 on page 23254 describes the output fields for the show multicast route command. Output fields
are listed in the approximate order in which they appear.
Table 922: show multicast route Output Fields
Field Name
Field Description
Level of Output
Instance
Name of the routing instance.
summary ... | Command introduced before Junos OS Release 7.4.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches.
Support for bidirectional PIM added in Junos OS Release 12.1.
oif-count option introduced in Junos OS Release 16.1 for the MX Series.
Support for PIM NSR support for VXLAN added in Juno... | [
"Example: Configuring Multicast-Only Fast Reroute in a PIM Domain"
] | |
show multicast rpf | show multicast rpf
<inet | inet6>
<instance instance-name>
<prefix>
<summary> | Display information about multicast reverse-path-forwarding (RPF) calculations. | [
{
"name": "none",
"desc": "Display RPF calculation information for all supported address families."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display the RPF calculation information for IPv4 or IPv6 family addresses, respectively."
},
{
"name": "instance instance-name",
"desc"... | view
Output Fields
Table 923 on page 23269 describes the output fields for the show multicast rpf command. Output fields
are listed in the approximate order in which they appear.
Table 923: show multicast rpf Output Fields
Field Name
Field Description
Instance
Name of the routing instance. (Displayed when multicast is ... | Command introduced before Junos OS Release 7.4.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches. | [] | |
show multicast scope | show multicast scope
<inet | inet6>
<instance instance-name> | Display administratively scoped IP multicast information. | [
{
"name": "none",
"desc": "Display standard information about administratively scoped multicast information for all supported address families in all routing instances."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display scoped multicast information for IPv4 or IPv6 family addresses, respe... | view
Output Fields
Table 924 on page 23275 describes the output fields for the show multicast scope command. Output fields
are listed in the approximate order in which they appear.
Table 924: show multicast scope Output Fields
Field Name
Field Description
Scope name
Name of the multicast scope.
Group Prefix
Range of mu... | Command introduced before Junos OS Release 7.4.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches. | [] | |
show multicast sessions | show multicast sessions
<brief | detail | extensive>
<regular-expression> | Display information about announced IP multicast sessions.
NOTE: On all SRX Series Firewalls, only 100 packets can be queued during pending (S, G)
route. However, when multiple multicast sessions enter the route resolve process at the
same time, buffer resources are not sufficient to queue 100 packets for each session. | [
{
"name": "none",
"desc": "Display standard information about all multicast sessions for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "... | view
Output Fields
Table 925 on page 23278 describes the output fields for the show multicast sessions command. Output
fields are listed in the approximate order in which they appear.
Table 925: show multicast sessions Output Fields
Field Name
Field Description
session-name
Name of the known announced multicast session... | Command introduced before Junos OS Release 7.4. | [] | |
show multicast snooping next-hops list | show multicast snooping next-hops list
<next-hop-identifier> | Display multicast snooping list next hops information. | [
{
"name": "next-hop-identifier",
"desc": "Display information for only the specified list next hop ID (an unsigned integer)."
}
] | view
Output Fields
Table 926: show multicast snooping next-hops list Output Fields
Field Name
Field Description
ID
Multicast snooping list next hop ID.
Refcount
Number of cache entries that are using this next hop.
Kernel Table Id
Kernel table ID.
Member next-hop
Member next hop IDs in the multicast unilist.
Flags
Inte... | Command introduced in Junos OS Release 24.2R1. | [
"EVPN-VXLAN DCI Multicast with Enhanced OISM"
] | |
show multicast snooping next-hops satellite | show multicast snooping next-hops satellite
<brief | detail | extensive>
<nexthop-id nexthop-id> | Display detailed multicast next-hop information for satellite device destinations.
You can use this command to:
•
View the current list of all multicast traffic next hops.
•
See details about a specified multicast next hop.
•
Follow aggregation device composite next-hop processing as the aggregation device resolves and... | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output. The default output level is brief."
},
{
"name": "nexthop-id nexthop-id",
"desc": "Display more detailed multicast satellite next-hop information only for the specified next-hop ID."
}
] | view
Output Fields
Table 927 on page 23283 lists the output fields for the show ethernet-switching flood next-hops satellite
command. Output fields are listed in the approximate order in which they appear.
Table 927: show multicast snooping next-hops satellite Command Output Fields
Field Name
Field Description
Level of... | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion",
"Egress (Local) Replication on the Satellite Devices"
] | |
show multicast snooping next-hops | show multicast snooping next-hops
<brief | detail>
<identifier next-hop-ID>
<inet>
<inet6>
<logical-system logical-system-name> | Display information about the IP multicast snooping next-hops. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "inet",
"desc": "(Optional) Display information for IPv4 multicast next hops only. If a family is not specified, both IPv4 and IPv6 results will be shown."
},
{
"name": "inet6",
"desc... | view
Output Fields
Table 928 on page 23289 describes the output fields for the show multicast snooping next-hops command.
Output fields are listed in the approximate order in which they appear.
Table 928: show multicast snooping next-hops Output Fields
Field Name
Field Description
Family
Protocol family for which multi... | Command introduced in Junos OS Release 11.2. | [] | |
show multicast snooping route satellite | show multicast snooping route satellite
<brief | detail | extensive>
<bridge-domain-name bridge-domain-name | <vlan-name vlan-name>
<group group-address>
<source source-address>
<vswitch-name virtual-switch-name> | Display Layer 2 multicast routing information (with IGMP snooping) for destination ports on satellite
devices.
This command lists multicast routing entries by route prefix and bridge domain name (Junos Fusion
Provider Edge). Each route entry lists the next-hop ID (NH Index) used when the aggregation device
performs ing... | [
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. The default output level is brief. The detail output level expands the original and satellite device next-hop chains for each route displayed. The extensive output level ... | view
Output Fields
Table 929 on page 23293 lists the output fields for the show multicast snooping route satellite command.
Output fields are listed in the approximate order in which they appear.
Table 929: show multicast snooping route satellite Command Output Fields
Field Name
Field Description
Level of Output
Route... | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion",
"Egress (Local) Replication on the Satellite Devices"
] | |
show multicast snooping route | show multicast snooping route
<logical-system logical-system>
<all | active | inactive | control | data>
<brief | detail | extensive>
<inet | inet6>
<vlan vlan-id>
<qualified-vlan vlan-id>
<mesh-group mesh-group-name>
<group group>
<source-prefix source-prefix>
<regexp regexp>
<bridge-domain bridge-domain-name>
<instan... | Display the entries in the IP multicast snooping forwarding table. You can display some of this
information with the show route table inet.1 command. | [
{
"name": "none",
"desc": "Display standard information about all entries in the multicast snooping table for all virtual switches and all bridge domains."
},
{
"name": "active | all | inactive",
"desc": "(Optional) Display all active entries, all entries, or all inactive entries, respectively, ... | Command introduced in Junos OS Release 8.5.
Support for control, data, qualified-vlan and vlan options introduced in Junos OS Release 13.3 for EX Series
switches.
Support for l3-irb-elaboration-route and evpn-core-nh-route options introduced in Junos OS Release 25.2R1
for QFX Series switches. | [] | ||
show multicast statistics satellite | show multicast statistics satellite
<brief | detail > | Display statistics about multicast satellite routing tables and ECID management. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default output level is brief."
}
] | view
Sample Output
show multicast statistics satellite
user@host> show multicast statistics satellite
Multicast Statistics:
Number of flood route entries: 8000
Number of satellite flood route entries: 8000
Number of MCINET route entries: 44000
Number of satellite MCINET route entri... | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion"
] | |
show multicast statistics | show multicast statistics
<inet | inet6>
<instance (all | instance-name)>
<interface interface-name>
<logical-system (all | logical-system-name)>
<satelliteshow multicast statistics satellite > | Display IP multicast statistics. | [
{
"name": "none",
"desc": "Display multicast statistics for all supported address families for all routing instances."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display multicast statistics for IPv4 or IPv6 family addresses, respectively."
},
{
"name": "instance (all | instance-na... | view
Output Fields
Table 931 on page 23308 describes the output fields for the show multicast statistics command. Output
fields are listed in the approximate order in which they appear.
Table 931: show multicast statistics Output Fields
Field Name
Field Description
Instance
Name of the routing instance.
Family
Protoco... | Command introduced before Junos OS Release 7.4.
interface option introduced in Junos OS Release 16.1 for the MX Series. | [] | |
show multicast summary satellite | show multicast summary satellite | Display summary status of multicast replication features in a Junos Fusion.
This command displays whether or not egress multicast replication (also called local replication) is
enabled. When local replication is configured, this command displays Egress replication: Enabled, and
Egress replication: Disabled otherwise.
T... | [] | view
Sample Output
show multicast summary satellite
user@host>show multicast summary satellite
Multicast:
Restart phase: Complete (11/11)
Egress replication: Enabled | Command introduced in Junos OS Release 16.1. | [
"Understanding Multicast Replication in a Junos Fusion",
"Configuring Egress (Local) Replication on a Junos Fusion"
] | |
show multicast usage | show multicast usage
<brief | detail>
<inet | inet6>
<instance instance-name> | Display usage information about the 10 most active Distance Vector Multicast Routing Protocol
(DVMRP) or Protocol Independent Multicast (PIM) groups. | [
{
"name": "none",
"desc": "Display multicast usage information for all supported address families for all routing instances."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display usage info... | view
Output Fields
Table 932 on page 23315 describes the output fields for the show multicast usage command. Output fields
are listed in the approximate order in which they appear.
Table 932: show multicast usage Output Fields
Field Name
Field Description
Instance
Name of the routing instance. (Displayed when multicast... | Command introduced before Junos OS Release 7.4.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches. | [] | |
show mvpn c-multicast | show mvpn c-multicast
<extensive | summary>
<instance-name instance-name>
<source-pe> | Display the multicast VPN customer multicast route information. | [
{
"name": "extensive | summary",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance-name instance-name",
"desc": "(Optional) Display output for the specified routing instance."
},
{
"name": "source-pe",
"desc": "(Optional) Display source-pe output for ... | view
Output Fields
Table 933 on page 23319 lists the output fields for the show mvpn c-multicast command. Output fields are
listed in the approximate order in which they appear.
Table 933: show mvpn c-multicast Output Fields
Field Name
Field Description
Level of Output
Instance
Name of the VPN routing instance.
summary... | Command introduced in Junos OS Release 8.4.
Option to show source-pe introduced in Junos OS Release 15.1. | [] | |
show mvpn instance | show mvpn instance
<instance-name>
<display-tunnel-name>
<extensive | summary>
<inet | inet6>
<logical-system> | Display the multicast VPN routing instance information according to the options specified. | [
{
"name": "instance-name",
"desc": "(Optional) Display statistics for the specified routing instance, or press Enter without specifying an instance name to show output for all instances."
},
{
"name": "display-tunnel-name",
"desc": "(Optional) Display the ingress provider tunnel name rather than... | view
Output Fields
Table 934 on page 23324 lists the output fields for the show mvpn instance command. Output fields are
listed in the approximate order in which they appear.
Table 934: show mvpn instance Output Fields
Field Name
Field Description
Level of Output
MVPN instance
Name of the multicast VPN routing instanc... | Command introduced in Junos OS Release 8.4.
Additional details in output for extensive option introduced in Junos OS Release 15.1. | [] | |
show mvpn neighbor | show mvpn neighbor
<extensive | summary>
<inet | inet6>
<instance instance-name | neighbor-address address>
<logical-system logical-system-name> | Display multicast VPN neighbor information. | [
{
"name": "extensive | summary",
"desc": "(Optional) Display the specified level of output for all multicast VPN neighbors."
},
{
"name": "inet | inet6",
"desc": "(Optional) Display IPv4 or IPv6 information for all multicast VPN neighbors."
},
{
"name": "instance instance-name |",
"d... | view
Output Fields
Table 935 on page 23330 lists the output fields for the show mvpn neighbor command. Output fields are
listed in the approximate order in which they appear.
Table 935: show mvpn neighbor Output Fields
Field Name
Field Description
Level of Output
MVPN instance
Name of the multicast VPN routing instance... | Command introduced in Junos OS Release 8.4. | [] | |
show mvpn suppressed | show mvpn suppressed
<instance-name>
<general | mvpn-rpt>
<inet | inet6> | MVPN maintains a list of suppressed customer-multicast states and the reason they were suppressed.
Display it, for example, to help understand the enforcement of forwarding-cache limits | [
{
"name": "instance-name",
"desc": "(Optional) Display statistics for the specified routing instance, or press Enter without specifying an instance name to show output for all instances."
},
{
"name": "general | mvpn-rpt",
"desc": "(Optional) Display suppressed multicast prefixes and reason they... | view
Output Fields
Table 936 on page 23337 lists the output fields for the show mvpn suppressed command. Output fields are
listed in the approximate order in which they appear.
Table 936: show mvpn suppressed Output Fields
Field Name
Field Description
MVPN instance
Name of the multicast VPN routing instance.
Prefix
Sho... | Command introduced in Junos OS Release16.1. | [] | |
show mvrp applicant-state | show mvrp applicant-state | For MX Series routers, EX Series switches, SRX1500, SRX300, SRX550M, SRX345, SRX340, and
SRX320, display Multiple VLAN Registration Protocol (MVRP) applicant state information. | [] | view
Output Fields
Table 937 on page 23339 lists the output fields for the show mvrp applicant-state command. Output fields
are listed in the approximate order in which they appear.
Table 937: show mvrp applicant-state Output Fields
Field Name
Field Description
VLAN Id
Displays the VLAN ID number.
Interface
Displays th... | Command introduced in Junos OS Release 10.1. | [] | |
show mvrp dynamic-vlan-memberships | show mvrp dynamic-vlan-memberships | Display all VLANs that have been created dynamically using Multiple VLAN Registration Protocol
(MVRP) on the router, switch, or SRX Series Firewall. | [] | clear
Output Fields
Table 938 on page 23343 lists the output fields for the show mvrp dynamic-vlan-memberships command on MX
Series routers and EX Series switches. Output fields are listed in the approximate order in which they
appear.
Table 938: show mvrp dynamic-vlan-memberships Output Fields
Field Name
Field Descri... | Command introduced in Junos OS Release 10.0. | [
"Example: Configuring Automatic VLAN Administration Using MVRP on EX Series Switches",
"Verifying That MVRP Is Working Correctly on Switches"
] | |
show mvrp interface | show mvrp interface | Display Multiple VLAN Registration Protocol (MVRP) interface-specific information. | [] | view
Output Fields
Table 939 on page 23346 lists the output fields for the show mvrp interface command. Output fields are
listed in the approximate order in which they appear.
Table 939: show mvrp interface Output Fields
Field Name
Field Description
Interface
Interface on which MVRP is configured.
Status
Status of the... | Command introduced in Junos OS Release 10.1. | [] | |
show mvrp registration-state | show mvrp registration-state | For MX Series routers, EX Series switches and SRX1500, SRX300, SRX550M, SRX345, SRX340 and
SRX320, display Multiple VLAN Registration Protocol (MVRP) registration state information. | [] | view
Output Fields
Table 940 on page 23348 lists the output fields for the show mvrp registration-state command. Output
fields are listed in the approximate order in which they appear.
Table 940: show mvrp registration-state Output Fields
Field Name
Field Description
VLAN Id
Displays the VLAN ID number.
Interface
Displ... | Command introduced in Junos OS Release 10.1. | [] | |
show mvrp statistics | show mvrp statistics | Display Multiple VLAN Registration Protocol (MVRP) statistics in the form of Multiple Registration
Protocol data unit (MRPDU) messages. | [
{
"name": "none",
"desc": "Show MVRP statistics for all interfaces on the switch."
},
{
"name": "interface interface-name",
"desc": "(Optional) Show MVRP statistics for the specified interface."
}
] | view
Output Fields
Table 941 on page 23351 lists the output fields for the show mvrp statistics command on EX Series
switches. Output fields are listed in the approximate order in which they appear.
Table 941: show mvrp statistics Output Fields
Field Name
Field Description
MRPDU received
Number of MRPDU messages receiv... | Command introduced in Junos OS Release 10.0. | [
"Example: Configuring Automatic VLAN Administration Using MVRP on EX Series Switches",
"Verifying That MVRP Is Working Correctly on Switches",
"Verifying That MVRP Is Working Correctly on EX Series Switches with ELS Support"
] | |
show mvrp | show mvrp | Display Multiple VLAN Registration Protocol (MVRP) configuration information. | [] | view
Output Fields
Table 943 on page 23358 lists the output fields for the show mvrp command. Output fields are listed in the
approximate order in which they appear.
Table 943: show mvrp Output Fields
Field Name
Field Description
MVRP dynamic VLAN
creation
Displays whether global MVRP dynamic VLAN creation is Enabled o... | Command introduced in Junos OS Release 10.0. | [
"Example: Configuring Automatic VLAN Administration Using MVRP on EX Series Switches",
"Verifying That MVRP Is Working Correctly on Switches"
] | |
show neighbor-discovery-inspection statistics | show neighbor-discovery-inspection statistics | Display neighbor discovery inspection statistics. | [] | view
Output Fields
Table 944 on page 23362 lists the output fields for the show neighbor-discovery-inspection statistics
command. Output fields are listed in the approximate order in which they appear.
Table 944: show neighbor-discovery-inspection statistics Output Fields
Field Name
Field Description
Level of Output
In... | Command introduced in Junos OS Release 14.1X53-D10. | [
"Example: Configuring Port Security (non-ELS)",
"Verifying That DAI Is Working Correctly"
] | |
show network access nas-5g | show network access nas-5g (state | statistics) | Display statistics on the interactions between the Access Gateway Function (AGF) and other network
functions during subscriber authentication. | [
{
"name": "state",
"desc": "Display the status of the 5G connections"
},
{
"name": "statistics",
"desc": "Display the statistics for the 5G core (5GC) connections."
}
] | view
Output Fields
Table 945 on page 23364 lists the output fields for the show network access nas-5g command.
Table 945: show network access nas-5g
Field Name
Field Description
Connection up
transitions
Number of established Non-Access Stratum (NAS) connections.
Connection down
transitions
Number of NAS connections sh... | Command introduced in Junos OS Release 22.3R1. | [] | |
show network-access aaa accounting | show network-access aaa accounting | Display the state of the RADIUS Acct-On response sent from the RADIUS server. | [] | view
Output Fields
Table 946 on page 23369 lists the output fields for the show network-access aaa accounting command.
Output fields are listed in the approximate order in which they appear.
Table 946: show network-access aaa accounting Output Fields
Field Name
Field Description
Profile
Name of the profile associated w... | Command introduced in Junos OS Release 12.3. | [
"RADIUS Accounting for Subscriber Access"
] | |
show network-access aaa radius-servers | show network-access aaa radius-servers
<detail> | Display RADIUS server status and information. | [
{
"name": "detail",
"desc": "(Optional) Display detailed level of information."
}
] | view
Output Fields
Table 947 on page 23372 lists the output fields for the show network-access aaa radius-servers command.
Output fields are listed in the approximate order in which they appear.
Table 947: show network-access aaa radius-servers Output Fields
Field Name
Field Description
Level of Output
Profile
Name of... | Command introduced in Junos OS Release 12.1. | [
"Verifying and Managing Subscriber AAA Information"
] | |
show network-access aaa saml assertion-cache | show network-access aaa saml assertion-cache
<brief | detail>
<domain-name domain-name>
<username username> | Display Security Assertion Markup Language (SAML) authentication assertion cache information. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Default: brief"
},
{
"name": "domain-name",
"desc": ""
},
{
"name": "domain-name",
"desc": "Specify the domain name such as example.net or any. This domain must match the domain configured in the ... | view
Sample Output
show network-access aaa saml assertion-cache
user@host> show network-access aaa saml assertion-cache
Username Remaining Validity
test1@example.com 4m 47s
user1@example.com 9h 20m 10s
user2@example.net 1d 1h 5m 20s
user@example.net 3h 40s
show network-access aaa saml a... | Command introduced in Junos OS Release 24.4R1. | [] | |
show network-access aaa statistics accounting | show network-access aaa statistics accounting; | Display authentication, authorization, and accounting (AAA) accounting statistics. | [] | view
Output Fields
Table 948 on page 23384 lists the output fields for the show network-access aaa statistics accounting
command. Output fields are listed in the approximate order in which they appear.
Table 948: show network-access aaa statistics accounting Output Fields
Field Name
Field Description
Requests received
... | Command introduced in Junos OS Release 9.0. | [
"accounting-stop-on-access-deny",
"Configuring 802.1X RADIUS Accounting (CLI Procedure)"
] | |
show network-access aaa statistics authentication | show network-access aaa statistics authentication
<detail> | Display AAA authentication statistics. | [
{
"name": "detail",
"desc": "(Optional) Displays detailed information about authentication."
}
] | view
Output Fields
Table 949 on page 23387 lists the output fields for the show network-access aaa statistics authentication
command. Output fields are listed in the approximate order in which they appear.
Table 949: show network-access aaa statistics authentication Output Fields
Field Name
Field Description
Level of ... | Command introduced in Junos OS Release 9.1.
Option detail introduced in Junos OS Release 12.1. | [
"Verifying and Managing Subscriber AAA Information"
] | |
show network-access aaa statistics dynamic-requests | show network-access aaa statistics dynamic-requests; | Display authentication, authorization, and accounting (AAA) authentication statistics for disconnects. | [] | view
Output Fields
Table 950 on page 23391 lists the output fields for the show network-access aaa statistics dynamic-requests
command. Output fields are listed in the approximate order in which they appear.
Table 950: show network-access aaa statistics dynamic-requests Output Fields
Field Name
Field Description
Reque... | Command introduced in Junos OS Release 9.0. | [
"Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch"
] | |
show network-access aaa statistics pending-accounting-stops | show network-access aaa statistics pending-accounting-stops | Display the number of pending accounting stop requests. | [] | view
Output Fields
Table 951 on page 23393 lists the output field for the show network-access aaa statistics pending-accounting-
stops command.
Table 951: show network-access aaa statistics pending-accounting-stops Output Fields
Field Name
Field Description
Pending accounting
stops
Total number of accounting stop mess... | Command introduced in Junos OS Release 13.1. | [] | |
show network-access aaa statistics preauthentication | show network-access aaa statistics preauthentication | Display AAA preauthentication statistics. | [
{
"name": "detail",
"desc": "(Optional) Displays detailed information about authentication."
}
] | view
Output Fields
Table 952 on page 23395 lists the output fields for the show network-access aaa statistics preauthentication
command. Output fields are listed in the approximate order in which they appear.
Table 952: show network-access aaa statistics preauthentication Output Fields
Field Name
Field Description
Lev... | Command introduced in Junos OS Release 13.3. | [
"RADIUS Logical Line Identification",
"RADIUS Logical Line Identification"
] | |
show network-access aaa statistics re-authentication | show network-access aaa statistics re-authentication | Display statistics for RADIUS re-authentication, and starting in Junos OS Release 18.2R1, for local re-
authentication. | [] | view
Output Fields
Table 953 on page 23397 lists the output fields for the show network-access aaa statistics re-
authentication command. Output fields are listed in the approximate order in which they appear.
Table 953: show network-access aaa statistics re-authentication Output Fields
Field Name
Field Description
Re... | Command introduced in Junos OS Release 17.4R1. | [] | |
show network-access aaa statistics | show network-access aaa statistics
<accounting (detail)>
<address-assignment (client | pool pool-name)>
<dynamic-requests>
<inline-napt pool pool-name>
<radius>
<saml>
<session-limit-per-username> | Display AAA accounting, address-assignment, dynamic request statistics, RADIUS settings and statistics,
Security Assertion Markup Language (SAML) authentication statistics, and subscriber session limit
statistics. | [
{
"name": "accounting (detail)",
"desc": "(Optional) Display AAA accounting statistics. The detail keyword displays"
},
{
"name": "additional accounting information",
"desc": ""
},
{
"name": "address-assignment",
"desc": ""
},
{
"name": "(client | pool pool-name)",
"desc"... | view
Output Fields
Table 954 on page 23399 lists the output fields for the show network-access aaa statistics command.
Output fields are listed in the approximate order in which they appear.
Table 954: show network-access aaa statistics Output Fields
Field Name
Field Description
Level of Output
Requests
received
•
Numb... | Command introduced in Junos OS Release 9.1.
address-assignment option introduced in Junos OS Release 10.0.
radius option introduced in Junos OS Release 11.4.
detail option introduced in Junos OS Release 13.3.
session-limit-per-username option introduced in Junos OS Release 18.4R1 on MX Series routers.
Support for saml ... | [
"Verifying and Managing Subscriber AAA Information",
"Session Options for Subscriber Access"
] | |
show network-access aaa subscribers session-id | show network-access aaa subscribers session-id session-id
<brief | detail> | Display information about the specified subscriber session. | [
{
"name": "session-id",
"desc": "ID of the subscriber session."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of information."
}
] | view
Output Fields
Table 955 on page 23418 lists the output fields for the show network-access aaa subscribers session-id
command. Output fields are listed in the approximate order in which they appear.
Table 955: show network-access aaa subscribers session-id Output Fields
Field Name
Field Description
Level of Output
... | Command introduced in Junos OS Release 10.0. | [
"Verifying and Managing Subscriber AAA Information",
"Local and Remote Service Activation and Deactivation Using the CLI",
"Deactivating a Single Instance of a Subscriber Service",
"Deactivating All Instances of a Subscriber Service",
"Verifying Subscriber Services with Multiple Instances",
"Policy and Ch... | |
show network-access aaa subscribers | show network-access aaa subscribers
<logical-system logical-system-name>
<routing-instance routing-instance-name>
<statistics>
<username>
<session-id session-id-number detail> | Display subscriber-specific AAA statistics. | [
{
"name": "logical-system logical-system-name",
"desc": "(Optional) List subscribers in the specific logical system."
},
{
"name": "routing-instance routing-instance-name",
"desc": "(Optional) List subscribers for the specific routing instance. If you do not specify a routing instance name, the ... | view
Output Fields
Table 956 on page 23429 lists the output fields for the show network-access aaa subscribers command.
Output fields are listed in the approximate order in which they appear.
Table 956: show network-access aaa subscribers Output Fields
Field Name
Field Description
Challenge requests
Number of authentic... | Command introduced in Junos OS Release 9.1.
Command updated with session-id session-id-number detail in Junos OS Release 17.3. | [
"Verifying and Managing Subscriber AAA Information"
] | |
show network-access aaa terminate-code | show network-access aaa terminate-code
<brief | detail | summary>
<reverse>
<(aaa | dhcp | l2tp | ppp)> | Display the count for termination cause types and the current mapping between session termination
cause types and code values. | [
{
"name": "none",
"desc": "Display all mappings."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "summary",
"desc": "(Optional) Display the specified level of output. The summary output is displayed by default and includes base count information about mappings. The brief ou... | view
Output Fields
Table 957 on page 23437 lists the output fields for the show network-access aaa terminate-code command.
Output fields are listed in the approximate order in which they appear.
Table 957: show network-access aaa terminate-code Output Fields
Field Name
Field Description
Level of Output
RADIUS
RFC-defin... | Command introduced in Junos OS Release 11.4.
vlan option introduced in Junos OS Release 16.1. | [
"Session Termination Causes and RADIUS Termination Cause Codes",
"Session Termination Causes and RADIUS Termination Cause Codes",
"AAA Termination Causes and Code Values",
"DHCP Termination Causes and Code Values",
"L2TP Termination Causes and Code Values",
"PPP Termination Causes and Code Values",
"VLA... | |
show network-access address-assignment pool (View) | show network-access address-assignment pool name | Display information summary about a specific pool. | [] | view
Output Fields
Table 958 on page 23443 lists the output fields for the show network-access address-assignment pool
command. Output fields are listed in the approximate order in which they appear.
Table 958: show network-access address-assignment pool Output Fields
Field Name
Field Description
IP address
IP address... | Command introduced in Junos OS Release 10.4. | [] | |
show network-access address-assignment pool | show network-access address-assignment pool pool-name
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Display state information for each address-assignment pool. | [
{
"name": "none",
"desc": "Display information about clients that have obtained addresses from the address-assignment pool."
},
{
"name": "pool pool-name",
"desc": "Display information about the specified address-assignment pool."
},
{
"name": "logical-system logical-system-name",
"d... | view and system
Output Fields
Table 959 on page 23445 lists the output fields for the show network-access address-assignment pool
command. Output fields are listed in the approximate order in which they appear.
Table 959: show network-access address-assignment pool Output Fields
Field Name
Field Description
IP address/... | Command introduced in Junos OS Release 9.0. | [] | |
show network-access domain-map | show network-access domain-map
<statistics> | Display domain map information. | [
{
"name": "statistics",
"desc": "(Optional) Display domain map statistics."
}
] | view
Output Fields
Table 960 on page 23447 lists the output fields for the show network-access domain-map statistics command.
Output fields are listed in the approximate order in which they appear.
Table 960: show network-access domain-map Output Fields
Field Name
Field Description
Matched domains
Number of usernames w... | Command introduced in Junos OS Release 10.4. | [
"Verifying Domain Maps"
] | |
show network-access gx-plus | show network-access gx-plus
<state | statistics | sync-state> | Display Gx-Plus provisioning state, synchronization state, and statistics information. | [
{
"name": "state",
"desc": "(Optional) Display Gx-Plus provisioning state."
},
{
"name": "statistics",
"desc": "(Optional) Display Gx-Plus statistics."
},
{
"name": "sync-state",
"desc": "(Optional) Display Gx-Plus synchronization state."
}
] | view
Output Fields
Table 961 on page 23449 lists the output fields for the show network-access gx-plus command. Output
fields are listed in the approximate order in which they appear.
Table 961: show network-access gx-plus Output Fields
Field Name
Field Description
Gx-plus state
State of the Gx-Plus application, includ... | Command introduced in Junos OS Release 11.2. | [] | |
show network-access nasreq statistics | show network-access nasreq statistics | Display information about the NASREQ protocol exchanges that are used to authenticate and authorize
subscribers when they log in. | [] | view
Output Fields
Table 962 on page 23466 lists the output fields for the show network-access nasreq statistics command.
Output fields are listed in the approximate order in which they appear.
Table 962: show network-access nasreq statistics Output Fields
Field Name
Field Description
Authentication request attempts
N... | Command introduced in Junos OS Release 16.1. | [
"NASREQ for Authentication and Authorization",
"NASREQ for Authentication and Authorization",
"Diameter Base Protocol"
] | |
show network-access ocs | show network-access ocs
<state>
<statistics [brief | detail | extensive]> | Display Online Charging System (OCS) provisioning state and statistics information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "state",
"desc": "(Optional) Display OCS provisioning state."
},
{
"name": "statistics",
"desc": "(Optional) Display OCS statistics."
}
] | view
Output Fields
Table 963 on page 23472 lists the output fields for the show network-access ocs command. Output fields
are listed in the approximate order in which they appear.
Table 963: show network-access ocs Output Fields
Field Name
Field Description
Level of Output
Ocs state
State of the OCS components, includ... | Command introduced in Junos OS Release 16.2. | [
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting"
] | |
show network-access pcrf | show network-access pcrf
<state>
<statistics [brief | detail | extensive]>
<subscribers> | Display Policy and Charging Rules Function (PCRF) provisioning state and statistics information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "state",
"desc": "(Optional) Display PCRF provisioning state."
},
{
"name": "statistics",
"desc": "(Optional) Display PCRF statistics."
},
{
"name": "subscribers",... | view
Output Fields
Table 964 on page 23475 lists the output fields for the show network-access pcrf command. Output fields
are listed in the approximate order in which they appear.
Table 964: show network-access pcrf Output Fields
Field Name
Field Description
Level of Output
Pcrf state
State of the PCRF components:
•
... | Command introduced in Junos OS Release 16.2. | [
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting"
] | |
show network-access radsec local-certificate | show network-access radsec local-certificate
<state>
<statistics [brief | detail | extensive]>
<certificate-name> | Display the state and statistics of local certificate acquisition. RADSEC uses local certificates
dynamically acquired from the public key infrastructure to establish a TLS connection.
If a certificate is not available, or if it was revoked, the RADSEC client will try to retrieve it every 300
seconds. Response timeout ... | [
{
"name": "state",
"desc": "Display the state of acquisition for the local certificate."
},
{
"name": "statistics",
"desc": "Display acquisition statistics for the local certificate."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output... | view
Output Fields
Table 965 on page 23480 lists the output fields for the show network-access local-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 965: show network-access radsec local-certificate Output Fields
Field Name
Field Description
Level of Output
Local cert... | Command introduced in Junos OS Release 19.1R1. | [
"RADIUS over TLS (RADSEC)"
] | |
show network-access radsec state | show network-access radsec state
<destination destination-id> | Display the connection state of RADSEC destinations. | [
{
"name": "destination destination–id",
"desc": "(Optional) Display detailed information about the request specified by this RADSEC destination."
}
] | view
Output Fields
Table 966 on page 23483 lists the output fields for the show network-access state command. Output fields
are listed in the approximate order in which they appear.
Table 966: show network-access radsec state Output Fields
Field Name
Field Description
Level of
Output
Radsec state
State information for... | Command introduced in Junos OS Release 19.1R1. | [
"RADIUS over TLS (RADSEC)"
] | |
show network-access radsec statistics | show network-access radsec statistics
<[brief | detail | extensive]>
<destination destination-id> | Display the connection statistics for the RADSEC destinations. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output. The default is brief, which will list only non-zero counters."
},
{
"name": "destination destination–id",
"desc": "(Optional) Display detailed information about the request specified by this RADSEC... | view
Output Fields
Table 967 on page 23486 lists the output fields for the show network-access statistics command. Output
fields are listed in the approximate order in which they appear.
Table 967: show network-access radsec statistics Output Fields
Field Name
Field Description
Level of Output
Radsec general counters
... | Command introduced in Junos OS Release 19.1R1. | [
"RADIUS over TLS (RADSEC)"
] | |
show network-access requests pending | show network-access requests pending
<detail>
<index number > | Display the status of pending authentication requests. | [
{
"name": "none",
"desc": "Show pending authentication requests."
},
{
"name": "page 23488detail",
"desc": "Display detailed information about all pending requests."
},
{
"name": "index number",
"desc": "(Optional) Display detailed information about the request specified by this inde... | view
Output Fields
Table 968 on page 23489 lists the output fields for the show network-access requests pending
command. Output fields are listed in the approximate order in which they appear.
Table 968: show network-access requests pending Output Fields
Field Name
Field Description
Index
Internal number identifying th... | Command introduced in Release 8.5 of Junos OS. | [] | |
show network-access requests statistics | show network-access requests statistics | Display authentication statistics for the configured authentication type. | [] | view
Output Fields
Table 969 on page 23492 lists the output fields for the network-access requests statistics command.
Output fields are listed in the approximate order in which they appear.
Table 969: show network-access requests statistics Output Fields
Field Name
Field Description
Total requests received
Total numbe... | Command modified in Release 9.1 of Junos OS. | [
"clear network-access requests statistics"
] | |
show network-access s6a | show network-access s6a
<state>
<statistics>
<statistics extensive> | Displays information about the s6a protocol exchanges that are used to authenticate subscribers when
subscribers log in. | [
{
"name": "state",
"desc": "Displays the state of information about authentication."
},
{
"name": "statistics",
"desc": "Displays information about all s6a general counters."
},
{
"name": "statistics extensive",
"desc": "Displays detail information about all s6a general counters."
... | view
Sample Output
show network-access s6a state
user@host> show network-access s6a state
S6a state:
Component Value
active-configuration yes
queue-state normal
request-count 0
show net... | Command introduced in Junos OS Release 19.3R1. | [
"Example: Configure S6a Application"
] | |
show network-access securid-node-secret-file | show network-access securid-node-secret-file | Display the path to the node secret file for the SecurID authentication type. | [] | view
Output Fields
Table 970 on page 23498 lists the output fields for the network-access securid-node-secret-file
command. Output fields are listed in the approximate order in which they appear.
Table 970: show network-access securid-node-secret-file Output Fields
Field Name
Field Description
SecurID Server
Name of th... | Command introduced in Release 9.1 of Junos OS. | [] | |
show network-agent statistics | show network-agent statistics
<brief | detail>
<juniper>
<gnmi>
<all>
<subscription-id identifier> | Display details of all or specific sensor subscriptions configured for Junos telemetry interface (JTI).
Subscriptions can be made using wither a Juniper API or a gRPC Network Management Interface (gNMI)
API. | [
{
"name": "brief | detail",
"desc": "(Optional) Display brief or detail level of output."
},
{
"name": "juniper",
"desc": "(Optional) Displays subscriptions using the Juniper API."
},
{
"name": "gnmi",
"desc": "(Optional) Displays subscriptions using the gRPC Network Management Inter... | view
Output Fields
Table 971 on page 23500 lists the output fields for the show network-agent statistics command. Output
fields are listed in the approximate order in which they appear.
Table 971: show network-agent statistics Output Fields
Field Name
Field Description
Subscription ID
Numerical identifier of the sensor... | Command introduced in Junos OS Release 19.2R1. | [] | |
show nlsd mode | show nlsd mode | The command show nlsd mode shows you if the netlink asynchronous (async) API is activated or
deactivated.
Additional Information
Netlink async mode is deactivated by default. You can enable netlink async mode with the command set
system netlink-async-mode. | [] | view
Sample Output
show nlsd mode
user@host> show nlsd mode
Netlink async mode status: activated | Command introduced in Junos OS Evolved Release 20.1R1. | [] | |
show node reboot | show node reboot node-name | Use this command to display any pending reboot or shutdown operations for the specified nodes in your
network.
Sample Output
show node reboot
user@host> show node reboot re0
reboot of node is scheduled at Mon Mar 7 09:33:13 2022 | [] | Command introduced in Junos OS Evolved 19.2R1. | [] | ||
show node statistics | show node statistics protocol-name node-name | icmp node-name
Shows ICMP statistics for the selected node.
icmpmsg node-name
Shows ICMP message types for the selected node.
ip node-name
Displays IPv4 statistics for the selected node.
ipext node-name
Shows detailed IPv4 statistics for the selected node.
tcp node-name
Displays TCP statistics for the selected node.
tc... | [] | Command introduced in Junos OS Evolved Release 19.2R1. | [] | ||
show nonstop-routing | show nonstop-routing | Display the status of nonstop active routing that includes the automerge statistics and state. | [] | View
Output Fields
Table 973 on page 23519 describes the output fields for the show nonstop-routing command. Output
fields are listed in the approximate order in which they appear.
Table 973: show nonstop-routing Output Fields
Field Name
Field Description
Nonstop Routing
State of NSR.
Precision Timers
state
State of p... | Command introduced in Junos OS Release 13.3. | [] | |
show nsagentd | show nsagentd (statistics | status) | The nsagentd options show you the statistics and status of the nsagentd app. This app handles and
resolves TCP-specific functionality, updates, and notifications when a TCP flow becomes stale. | [] | view
Sample Output
show nsagentd statistics
user@host> show nsagentd statistics
Invalid upcalls: 0
Ingress SYN upcalls:
Upcalls: 0
FIB lookups:
Attempted: 0
Failed: 0
Succeeded: 0
Result cod... | Command introduced in Junos OS Evolved Release 21.3R1. | [] | |
show ntp associations | show ntp associations
<no-resolve> | Display Network Time Protocol (NTP) peers and their state. | [
{
"name": "none",
"desc": "Display NTP peers and their state."
},
{
"name": "no-resolve",
"desc": "(Optional) Suppress symbolic addressing."
}
] | view
Output Fields
Table 974 on page 23525 describes the output fields for the show ntp associations command. Output
fields are listed in the approximate order in which they appear.
Table 974: show ntp associations Output Fields
Field Name
Field Description
remote
Address or name of the remote NTP peer. Status of the p... | Command introduced before Junos OS Release 7.4. | [] | |
show ntp status | show ntp status
<no-resolve> | Display the values of internal variables returned by Network Time Protocol (NTP) peers. | [
{
"name": "none",
"desc": "Display the values of internal variables returned by NTP peers."
},
{
"name": "no-resolve",
"desc": "(Optional) Suppress symbolic addressing."
}
] | view
Output Fields
Table 975 on page 23529 describes the output fields for the show ntp status command. Output fields are
listed in the approximate order in which they appear.
Table 975: show ntp status Output Fields
Field Name
Field Description
status
System status word, a code representing the status items listed.
l... | Command introduced before Junos OS Release 7.4. | [] | |
show oam ethernet connectivity-fault-management delay-statistics | show oam ethernet connectivity-fault-management delay-statistics
<count entry-count>
<local-mep mep-id>
<maintenance-association ma-name>
<maintenance-domain md-name>
<remote-mep remote-mep-id> | On MX Series routers with Ethernet interfaces on Dense Port Concentrators (DPCs), display ETH-DM
delay statistics.
On EX Series switches, display delay measurement results. | [
{
"name": "count entry-count",
"desc": "(Optional) Number of entries to display from the statistics table. The range of values is 1 through 100. The default value is 100 entries."
},
{
"name": "local-mep mep-id",
"desc": "(Optional) Numeric identifier of the local MEP. On MX Series routers, the ... | view
Output Fields
Table 976 on page 23534 lists the output fields for the show oam ethernet connectivity-fault-management
delay-statistics command and the show oam ethernet connectivity-fault-management mep-statistics command.
Output fields are listed in the approximate order in which they appear.
Table 976: show oam... | Command introduced in Junos OS Release 9.5. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.