command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show security flow session application-firewall | show security flow session application-firewall
< dynamic-application (dyn-app-name | junos:UNKNOWN) >
< dynamic-application-group (dyn-app-group | junos:UNASSIGNED) >
< application-firewall-rule-set rule-set-name >
< rule rule-name >
< brief | extensive | summary > | Display all sessions where application firewall is enabled.
Include options to filter the output and display only those enabled sessions with the specified features. | [] | view
Output Fields
Table 1249 on page 25112 lists the output fields for the show security flow session application-firewall
extensive command. Output fields are listed in the approximate order in which they appear in the
extensive display.
Table 1249: show security flow session application-firewall extensive Output Fi... | Command introduced in Junos OS Release 11.2. | [
"Example: Configuring an Application Group for Application Firewall",
"show security flow session"
] | |
show security flow session brief node | show security flow session brief node (node-id | all | local | primary) | Display information about all currently active security sessions on the device for the specified node
options in brief mode. | [
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display session information on a specific node."
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1."
},
{
"name": "all",
"desc": "Display information about all nodes."
},
... | view
Output Fields
Table 1250 on page 25120 lists the output fields for the show security flow session brief node command.
Output fields are listed in the approximate order in which they appear.
Table 1250: show security flow session brief node Output Fields
Field Name
Field Description
Session ID
Number that identifi... | Command introduced in Junos OS Release 8.5; node options added in Junos OS Release 9.0. Filter
options added in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session destination-port | show security flow session destination-port
destination-port-number [brief | extensive | summary] | Display information about each session that uses the specified destination port. | [
{
"name": "destination-port-number",
"desc": "Number of the destination port for which to display sessions information."
},
{
"name": "brief | extensive | summary",
"desc": "Display the specified level of output."
}
] | view
Output Fields
Table 1251 on page 25125 lists the output fields for the show security flow session destination-port
command. Output fields are listed in the approximate order in which they appear.
Table 1251: show security flow session destination-port Output Fields
Field Name
Field Description
Session ID
Number th... | Command introduced in Junos OS Release 8.5; Filter and view options added in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session destination-prefix | show security flow session destination-prefix
destination-IP-prefix [brief | extensive | summary] | Display information about each session that matches the specified IP destination prefix. | [
{
"name": "destination-IP-prefix",
"desc": "Destination IP prefix or address for which to display session information."
}
] | view
Output Fields
Table 1252 on page 25131 lists the output fields for the show security flow session destination-prefix
command. Output fields are listed in the approximate order in which they appear.
Table 1252: show security flow session destination-prefix Output Fields
Field Name
Field Description
Session ID
Numbe... | Command introduced in Junos OS Release 8.5. Support.
Support for IPv6 addresses added in Junos OS Release 10.2.
Filter and view options added in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session extensive node | show security flow session extensive node (node-id | all | local | primary) | Display information about all currently active security sessions on the device for the specified node
options in extensive mode. | [
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display session information on a specific node."
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1."
},
{
"name": "all",
"desc": "Display information about all nodes."
},
... | view
Output Fields
Table 1253 on page 25138 lists the output fields for the show security flow session extensive node
command. Output fields are listed in the approximate order in which they appear.
Table 1253: show security flow session extensive node Output Fields
Field Name
Field Description
Session ID
Number that i... | Command introduced in Junos OS Release 8.5; node options added in Junos OS Release 9.0. Filter
options added in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices",
"show security flow session"
] | |
show security flow session family | show security flow session family (inet | inet6)
[brief | extensive | summary] | Display filtered summary of information about existing sessions, including types of sessions, active and
failed sessions, and the maximum allowed number of sessions. | [
{
"name": "inet",
"desc": "Display details summary of IPv4 sessions."
},
{
"name": "inet6",
"desc": "Display details summary of IPv6 sessions."
}
] | view
Output Fields
Table 1254 on page 25148 lists the output fields for the show security flow session family command.
Output fields are listed in the approximate order in which they appear.
Table 1254: show security flow session family Output Fields
Field Name
Field Description
Session ID
Number that identifies the s... | Command introduced in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session idp family | show security flow session idp family (inet | inet6) | Display filtered summary of information about existing sessions, including types of sessions, active and
failed sessions, and the maximum allowed number of sessions. | [
{
"name": "inet",
"desc": "Display details summary of IPv4 sessions."
},
{
"name": "inet6",
"desc": "Display details summary of IPv6 sessions."
}
] | view
Output Fields
Table 1255 on page 25155 lists the output fields for the show security flow session summary family
command. Output fields are listed in the approximate order in which they appear.
Table 1255: show security flow session summary Output Fields
Field Name
Field Description
Valid sessions
Count of valid s... | Command introduced in Junos OS Release 10.2.
Support for family inet6 added in Junos OS Release 12.1X46-D10. | [
"Intrusion Detection and Prevention Overview"
] | |
show security flow session idp summary | show security flow session idp summary | Display summary output. | [
{
"name": "application",
"desc": "Application name"
},
{
"name": "destination-port",
"desc": "Destination port"
},
{
"name": "destination-prefix",
"desc": "Destination IP prefix or address"
},
{
"name": "family",
"desc": "Display session by family."
},
{
"name": "... | view
Output Fields
Table 1256 on page 25158 lists the output fields for the show security flow session idp summary command.
Output fields are listed in the approximate order in which they appear.
Table 1256: show security flow session idp summary Output Fields
Field Name
Field Description
Valid session
Number of valid ... | Command introduced in Junos OS Release 10.2. | [
"show security flow session"
] | |
show security flow session interface | show security flow session interface
interface-name [brief | extensive | summary] | Display information about each session that uses the specified interface. The interface name can be a
session's incoming or outgoing interface. | [
{
"name": "interface-name",
"desc": "Name of the interface on the device for which to display sessions information."
}
] | view
Output Fields
Table 1257 on page 25161 lists the output fields for the show security flow session interface command.
Output fields are listed in the approximate order in which they appear.
Table 1257: show security flow session interface Output Fields
Field Name
Field Description
Session ID
Number that identifies... | Command introduced in Junos OS Release 8.5; Filter and view options added in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session nat | show security flow session nat [brief | extensive | summary] | Display sessions with network address translation. | [
{
"name": "brief | extensive | summary",
"desc": "Display the specified level of output."
}
] | view
Output Fields
Table 1258 on page 25167 lists the output fields for the show security flow session nat command. Output
fields are listed in the approximate order in which they appear.
Table 1258: show security flow session nat Output Fields
Field Name
Field Description
Session ID
Number that identifies the session... | Command introduced in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices",
"show security flow session"
] | |
show security flow session plugins | show security flow session plugins | Displays the detailed information about security flow session of plugins. The output displays the
information in a list to make it easy for you to read and monitor the flow session. | [] | View
Output Fields
Table 1259 on page 25171 lists the output fields for the show security flow session plugins command.
Table 1259: show security flow session plugins Output Fields
Field Name
Field Description
Bandwidth
Client to server and server to client bytes added together and converted to MB or GB.
Table 1259: s... | Command introduced in Junos OS Release 21.1R1. | [] | |
show security flow session policy-id | show security flow session policy-id policy-id-number [brief | extensive | summary ] | Display information about each session by using policy id of the session. | [
{
"name": "policy-id-number",
"desc": "ID of the policy that the first packet of the session matches with."
}
] | view
Output Fields
Table 1260 on page 25175 lists the output fields for the show security flow session policy-id command.
Output fields are listed in the approximate order in which they appear.
Table 1260: show security flow session policy-id Output Fields
Field Name
Field Description
Session ID
Number that identifies ... | Command introduced in Junos OS Release 12.3X48-D10. | [] | |
show security flow session pretty | show security flow session pretty | Displays the detailed information about security flow session. The output displays the information in a
list to make it easy for you to read and monitor the flow session. | [] | View
Output Fields
Table 1261 on page 25180 lists the output fields for the show security flow session pretty command.
Table 1261: show security flow session pretty Output Fields
Field Name
Field Description
Advanced Security
Feature Status
Status of the advanced security feature status such as Content Security, IDP, ... | Command introduced in Junos OS Release 21.1R1. | [] | |
show security flow session protocol | show security flow session protocol ( protocol-name | protocol-
number )
[brief | extensive | summary] | Display information about each session that uses the specified protocol. | [
{
"name": "protocol-name",
"desc": "(Optional) Protocol to use as a sessions filter. Information about sessions that use this"
},
{
"name": "ah",
"desc": "IP Security Authentication Header"
},
{
"name": "egp",
"desc": "Exterior gateway protocol"
},
{
"name": "esp",
"desc"... | view
Output Fields
Table 1262 on page 25185 lists the output fields for the show security flow session protocol command.
Output fields are listed in the approximate order in which they appear.
Table 1262: show security flow session protocol Output Fields
Field Name
Field Description
Session ID
Number that identifies th... | Command introduced in Junos OS Release 8.5; Filter and view options introduced in Junos OS Release
10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session resource-manager | show security flow session resource-manager
[brief | extensive | summary] | This command displays information about sessions created by the resource manager. | [
{
"name": "none",
"desc": "Display all resource manager sessions."
},
{
"name": "brief | extensive | summary",
"desc": "Display the specified level of output."
}
] | view
Output Fields
Table 1263 on page 25191 lists the output fields for the show security flow session resource-manager
command. Output fields are listed in the approximate order in which they appear.
Table 1263: show security flow session resource-manager Output Fields
Field Name
Field Description
Session ID
Number th... | Command introduced in Junos OS Release 8.5.
Filter and view options introduced in Junos OS Release 10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session selective-sync-disabled | show security flow session selective-sync-disabled | Display information about all the sessions that are not synced to the peer node. The command output
displays details when the session-sync disabledoption is configured. | [] | view
Output Fields
Following table lists the output fields for the show security flow session selective-sync-disabled command.
Output fields are listed in the approximate order in which they appear.
Table 1264: show show security flow session selective-sync-disabled Output Fields
Field Name
Field Description
Session I... | Command introduced in Junos OS Release 25.4R1. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session services-offload | show security flow session services-offload
[filter] [brief | extensive | summary] | Display information about all currently active services-offload security sessions on the device. | [
{
"name": "filter",
"desc": "Filter the display by the specified criteria."
},
{
"name": "filter:",
"desc": ""
},
{
"name": "application",
"desc": "Application name."
},
{
"name": "application-firewall-rule-set",
"desc": "Application firewall enabled with the specified ru... | view
Output Fields
Table 1265 on page 25201 lists the output fields for the show security flow session services-offload
command. Output fields are listed in the approximate order in which they appear.
Table 1265: show security flow session services-offload Output Fields
Field Name
Field Description
Session ID
Number t... | Command introduced in Junos OS Release 11.4.
Low-latency option introduced in Junos OS Release 12.1X44-D10.
Starting in Junos OS Release 15.1X49-D10 and Junos OS Release 17.3R1, the SRX5K-MPC3-100G10G
(IOC3) and the SRX5K-MPC3-40G10G (IOC3) with Express Path (formerly known as services offloading)
support are introduce... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session session-identifier | show security flow session session-identifier session-identifier | Display detailed information for the identified session. | [
{
"name": "session-identifier",
"desc": "Identifier of the session about which to display information."
}
] | view
Output Fields
Table 1266 on page 25207 lists the output fields for the show security flow session session-identifier
command. Output fields are listed in the approximate order in which they appear.
Table 1266: show security flow session session-identifier Output Fields
Field Name
Field Description
Session ID
A uni... | Command introduced in Junos OS Release 8.5. Output changed to support natflag2 and flag in Junos OS
Release 12.3X48-D10. | [
"Flow-Based Sessions"
] | |
show security flow session session-state | show security flow session session-state session-state | Display detailed information for the Multinode High Availability session. | [
{
"name": "active-warm",
"desc": "Multinode High Availability session with one active wing and one warm wing."
},
{
"name": "backup",
"desc": "Multinode High Availability Layer 2 deployment backup session"
},
{
"name": "warm",
"desc": "Multinode High Availability Layer 3 deployment w... | view
Output Fields
Table 1268 on page 25216 lists the output fields for the command. Output fields are listed in the
approximate order in which they appear.
Table 1268: show security flow session session-state
Field Name
Field Description
Session ID
A unique number that a server assigns a specific user for the duration... | Command introduced in Junos OS Release 23.4R1. | [] | |
show security flow session source-port | show security flow session source-port
source-port-number
[brief | extensive | summary] | Display information about each session that uses the specified source port. | [
{
"name": "source-port-number",
"desc": "Number of the source port about which to display sessions information."
}
] | view
Output Fields
Table 1269 on page 25220 lists the output fields for the show security flow session source-port command.
Output fields are listed in the approximate order in which they appear.
Table 1269: show security flow session source-port Output Fields
Field Name
Field Description
Session ID
Number that identif... | Command introduced in Junos OS Release 8.5; Filter and view options introduced in Junos OS Release
10.2. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session source-prefix | show security flow session source-prefix
source-prefix-number
[brief | extensive | summary] | Display information about each session that uses the specified source prefix. | [
{
"name": "source-prefix-number",
"desc": "Source IP prefix or address for which to display sessions information."
},
{
"name": "brief | extensive | summary",
"desc": "Display the specified level of output."
}
] | view
Output Fields
Table 1270 on page 25225 lists the output fields for the show security flow session source-prefix command.
Output fields are listed in the approximate order in which they appear.
Table 1270: show security flow session source-prefix Output Fields
Field Name
Field Description
Session ID
Number that ide... | Command introduced in Junos OS Release 8.5.
Support for IPv6 addresses added in Junos OS Release 10.2. Support for IPv6 addresses in active/active
chassis cluster configurations (in addition to the existing support of active/passive chassis cluster
configurations) added in Junos OS Release 10.4.
Filter and view option... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session ssl | show security flow session ssl [brief | extensive] | Display information about the active SSL sessions on the device. | [
{
"name": "brief | extensive",
"desc": "Display the specified level of output."
}
] | view
Output Fields
Table 1271 on page 25231 lists the output fields for the show security flow session ssl command. Output
fields are listed in the approximate order in which they appear.
Table 1271: show security flow session ssl Output Fields
Field Name
Field Description
Displayed with Option
Session ID
Number that i... | Command introduced in Junos OS Release 19.3R1. | [
"Operational Commands to Troubleshoot SSL Sessions"
] | |
show security flow session summary family | show security flow session summary family (inet | inet6) | Display filtered summary of information about existing sessions, including types of sessions, active and
failed sessions, and the maximum allowed number of sessions. | [
{
"name": "inet",
"desc": "Display details summary of IPv4 sessions."
},
{
"name": "inet6",
"desc": "Display details summary of IPv6 sessions."
}
] | view
Output Fields
Table 1272 on page 25235 lists the output fields for the show security flow session summary family
command. Output fields are listed in the approximate order in which they appear.
Table 1272: show security flow session summary Output Fields
Field Name
Field Description
Valid sessions
Count of valid s... | Command introduced in Junos OS Release 10.2.
Support on SRX Series Firewalls for flow-based mode for family inet6 added in Junos OS Release 10.2.
Support for IPv6 addresses in active/active chassis cluster configurations (in addition to the existing
support of active/passive chassis cluster configurations) added in Jun... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session summary node | show security flow session summary node (node-id | all | local | primary) | Display information about all currently active security sessions on the device for the specified node
options in summary mode. | [
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display session information on a specific node."
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1."
},
{
"name": "all",
"desc": "Display information about all nodes."
},
... | view
Output Fields
Table 1273 on page 25238 lists the output fields for the show security flow session summary node command.
Output fields are listed in the approximate order in which they appear.
Table 1273: show security flow session summary node Output Fields
Field Name
Field Description
Unicast-sessions
Number of u... | Command introduced in Junos OS Release 8.5; node options added in Junos OS Release 9.0. Filter
options added in Junos OS Release 10.2.
Support on SRX Series Firewalls for flow-based mode for family inet6 added in Junos OS Release 10.2.
Support for IPv6 addresses in active/active chassis cluster configurations (in addit... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session summary services-offload | show security flow session summary services-offload [filter] | Display information about all currently active services-offload security sessions on the device in
summary mode. | [
{
"name": "filter",
"desc": "Filter the display by the specified criteria."
},
{
"name": "filter:",
"desc": ""
},
{
"name": "application",
"desc": "Application name."
},
{
"name": "application-firewall-rule-set",
"desc": "Application firewall enabled with the specified ru... | view
Output Fields
Table 1274 on page 25247 lists the output fields for the show security flow session summary services-offload
command. Output fields are listed in the approximate order in which they appear.
Table 1274: show security flow session summary services-offload Output Fields
Field Name
Field Description
Unic... | Command introduced in Junos OS Release 11.4.
Starting with Junos OS Release 15.1X49-D10 and Junos OS Release 17.3R1, the SRX5K-
MPC3-100G10G (IOC3) and the SRX5K-MPC3-40G10G (IOC3) with Express Path (formerly known as
services offloading) support are introduced for SRX5400, SRX5600, and SRX5800 devices.
This command i... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session tenant | show security flow session tenant (tenant-name | all) | Displays the information about the currently active security flow sessions of the tenant systems on the
device. You can either view the currently active security flow sessions information for a specific tenant
system or for all the tenant systems. | [
{
"name": "tenant-name",
"desc": "Name of the tenant system."
},
{
"name": "all",
"desc": "Displays the security flow session information for all the tenant systems."
}
] | view
Output Fields
Table 1275 on page 25252 lists the output fields for the show security flow session tenant command.
Output fields are listed in the approximate order in which they appear.
Table 1275: show security flow session tenant
Field Name
Field Description
Session ID
Number that identifies the session. You can... | Command introduced in Junos OS Release 18.3R1. | [] | |
show security flow session tunnel | show security flow session tunnel
[brief | extensive | summary] | Display information about all tunnel sessions. | [
{
"name": "none",
"desc": "Display the brief (default) level of output."
},
{
"name": "brief",
"desc": "Display the specified brief level of output."
},
{
"name": "extensive",
"desc": "Display the information about all current active sessions."
},
{
"name": "summary",
"de... | view
Output Fields
Table 1276 on page 25255 lists the output fields for the show security flow session tunnel command.
Output fields are listed in the approximate order in which they appear.
Table 1276: show security flow session tunnel Output Fields
Field Name
Field Description
Session ID
Number that identifies the se... | Command introduced in Junos OS Release 8.5; Filter and view options introduced in Junos OS Release
10.2. Fragmentation counters options introduced in Junos OS Release 15.1X49-90.
NOTE: Only show security flow session tunnel extensive and show security flow
session tunnel summary provide fragmentation counters output. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow session | show security flow session
<source-prefix ipprefix>
<destination-prefix ipprefix>
<source-port>
<destination-port>
<protocol>
<summary | brief | extensive | pretty | plugins>
<encrypted>
<idp | ssl | tunnel | nat | services-offload | resource-manager | application-traffic-control
| security-intelligenc... | Display information about all currently active security sessions on the device. For the normal flow
sessions, the show security flow session command displays byte counters based on IP header length.
However, for sessions in Express Path mode, the statistics are collected from the IOC2 (SRX5K-MPC),
IOC3 (SRX5K-MPC3-100G... | [
{
"name": "filter",
"desc": "Filter the display by the specified criteria."
},
{
"name": "advanced-anti-malware",
"desc": "Show advanced-anti-malware sessions. For details on the advanced-anti-malware option, see the Sky Advanced Threat Prevention CLI Reference Guide."
},
{
"name": "all-... | view
Output Fields
Table 1277 on page 25272 lists the output fields for the show security flow session command. Output
fields are listed in the approximate order in which they appear.
Table 1277: show security flow session Output Fields
Field Name
Field Description
Level of Output
Session ID
Number that identifies the... | Command introduced in Junos OS Release 8.5.
Support for filter and view options added in Junos OS Release 10.2.
Application firewall, dynamic application, and logical system filters added in Junos OS Release 11.2.
Policy ID filter added in Junos OS Release 12.3X48-D10.
Support for connection tag added in Junos OS Rele... | [
"Understanding Traffic Processing on Security Devices",
"clear security flow session all"
] | |
show security flow statistics | show security flow statistics
<node (node-id | all | local | primary)>
<logical-system (logical-system-name | all)>
<tenant (tenant-name | all)> | Display security flow statistics on a specific SPU. A flow is a stream of related packets that meet the
same matching criteria and share the same characteristics.
A packet undergoes flow-based processing after packet-based filters and some screens have been
applied to it. A System Processing Unit (SPU) processes the pa... | [
{
"name": "none",
"desc": "Displays the security flow statistics information."
},
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, displays all security flow statistics on a specific node (device) in the cluster."
},
{
"name": "node-id",
"desc": "Identificati... | view
Output Fields
Table 1278 on page 25290 lists the output fields for the show security flow statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1278: show security flow statistics Output Fields
Field Name
Field Description
Current sessions
Number of active sessions on th... | Command introduced in Junos OS Release 10.2.
Fragmentation counters options introduced in Junos OS Release 15.1X49-90.
Support added at the logical system and tenant system level in Junos OS Release 20.1R1. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow status | show security flow status | Display the flow processing modes and logging status. | [] | view
Output Fields
Table 1279 on page 25295 lists the output fields for the show security flow status command. Output fields
are listed in the approximate order in which they appear.
Table 1279: show security flow status Output Fields
Field Name
Field Description
Flow forwarding mode
Flow processing mode.
•
Inet forwa... | Command introduced in Junos OS Release 10.2; session distribution mode option added in Junos OS
Release 12.1X44-D10; enhanced route scaling mode option added in Junos OS Release 12.1X45-D10.
GTP-U distribution option added in Junos OS Release 15.1X49-D40.
Starting in Junos OS Release 15.1X49-D10 and Junos OS Release 1... | [
"Understanding Traffic Processing on Security Devices"
] | |
show security flow tunnel inspection statistics | show security flow tunnel-inspection statistics | [] | Output Fields
Table 1280: show security flow tunnel-inspection statistics Output Fields
Field Name
Field Description
Tunnel inspection
type
Tunnel inspection type. Displays VXLAN for VXLAN tunnel traffic
overlay session active
Number of active overlay sessions
overlay session
create
Number of overlay sessions created
o... | Command introduced in Junos OS Release 21.1R1. | [
"Tunnel Inspection for EVPN-VXLAN on SRX Series Devices"
] | ||
show security forward-options resource-manager | show security forward-options resource-manager [settings | <node (node-id | all | local |
primary)> | status] | Display forward option status and the CPU and memory allocated for the advance services and to verify
the CPU allocation between routing engine and flow RT threads. | [
{
"name": "setting",
"desc": "Display resource manager settings"
},
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display resource manager settings on a specific"
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1."
},
... | view
Output Fields
Table 1281 on page 25308 lists the output fields for the show security forward-options resource-manager
settings command. Output fields are listed in the approximate order in which they appear.
Table 1281: show security forward-options resource-manager settings Output Fields
Field Name
Field Descrip... | Command introduced in Junos OS Release 19.4R1.
From Junos OS Release 25.2R1, when you launch vSRX 3.0 instances with even numbers of CPU cores
configured, then by default two CPU cores are allocated to the Routing Engine. This allocation enhances
system stability and ensures the efficient operation of both the Routing ... | [] | |
show security forwarding-options mirror-filter | show security forwarding-options mirror-filter (all | filter-name) | Displays status information about all configured mirror filters or that of a specific mirror filter. Each
mirror filter contains a set of parameters against which traffic is matched. For each mirror filter, the
output identifies the number of packets that were matched by the filter for mirroring and the number of
packe... | [
{
"name": "all",
"desc": "Display counters for all mirror filters."
},
{
"name": "filter-name",
"desc": "Name of the mirror filter for which the counters are displayed."
}
] | view
Output Fields
Lists the output fields for the show security forward-options mirror-filter command. Output fields are listed
in the approximate order in which they appear in the output.
Table 1282: show security forward-options mirror-filter
Field Name
Field Description
mirror-filter-name
Name of the mirror filter... | Command introduced in Junos OS Release 12.1X46-D10. | [] | |
show security group-vpn member ike security-associations | show security group-vpn member ike security-associations [brief | detail] [index sa-index] [peer-
ipaddress] | Display IKE security associations (SAs) for group members. Group VPNv2 is supported on SRX300,
SRX320, SRX340, SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls
and vSRX Virtual Firewall instances. | [
{
"name": "none",
"desc": "Display summary information about all IKE SAs for the group members."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "indexsa-index",
"desc": "... | view
Output Fields
Table 1283 on page 25314 lists the output fields for the show security group-vpn member ike security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1283: show security group-vpn member ike security-associations Output Fields
Field Name
Field Desc... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn member ipsec inactive-tunnels | show security group-vpn member ipsec inactive-tunnels <brief> <detail> <group-id group-id> | Show inactive Group VPNs. Group VPNv2 is supported on SRX300, SRX320, SRX340, SRX345,
SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual Firewall
instances. | [
{
"name": "none",
"desc": "Display information for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "group-id group-id",
"desc": "(Optional) Display informatio... | view
Output Fields
Table 1284 on page 25319 lists the output fields for the show security group-vpn member ipsec inactive-
tunnels command. Output fields are listed in the approximate order in which they appear.
Table 1284: show security group-vpn member ipsec inactive-tunnels Output Fields
Field Name
Field Descriptio... | Command introduced in Junos OS Release 15.1X49-D30. | [
"Group VPNv2 Overview"
] | |
show security group-vpn member ipsec security-associations | show security group-vpn member ipsec security-associations [brief | detail] [index sa-index] | Display group VPN security associations (SAs) for a group member. Group VPNv2 is supported on
SRX300, SRX320, SRX340, SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series
Firewalls and vSRX Virtual Firewall instances. | [
{
"name": "none",
"desc": "Display information about all group VPN SAs for the group member."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "index sa-index",
"desc": "(O... | view
Output Fields
Table 1285 on page 25323 lists the output fields for the show security group-vpn member ipsec security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1285: show security group-vpn member ipsec security-associations
Field Name
Field Description
To... | Command introduced in Junos OS Release 10.2.
Command introduced in Junos OS Release 18.2R1 for MX-series. | [
"Group VPNv2 Overview"
] | |
show security group-vpn member ipsec statistics | show security group-vpn member ipsec statistics <index index> | Show IPsec statistics. Group VPNv2 is supported on SRX300, SRX320, SRX340, SRX345, SRX550HM,
SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual Firewall instances. | [
{
"name": "none",
"desc": "Display information for all IPsec SAs."
},
{
"name": "index index",
"desc": "(Optional) Display detailed information about the specified SA, identified by index number. To obtain a list of all SAs that includes their index numbers, use the command with no options."
}... | view
Output Fields
Table 1286 on page 25328 lists the output fields for the show security group-vpn member ipsec statistics
command. Output fields are listed in the approximate order in which they appear.
Table 1286: show security group-vpn member ipsec statistics Output Fields
Field Name
Field Description
ESP Statisti... | Command introduced in Junos OS Release 15.1X49-D30.
Command introduced in Junos OS Release 18.2R1 for MX-series. | [
"Group VPNv2 Overview"
] | |
show security group-vpn member kek security-associations | show security group-vpn member kek security-associations [brief | detail | display xml] [index
sa-index] [peer-ipaddress] | Display Group VPNv2 security associations (SAs) for a group member. Group VPNv2 is supported on
SRX300, SRX320, SRX340, SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series
Firewalls and vSRX Virtual Firewall instances.
Group VPNv2 is the name of the Group VPN technology on MX5, MX10, MX40, MX80, MX240,
MX48... | [
{
"name": "none",
"desc": "Display information about all Group VPNv2 SAs for the group member."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "display xml",
"desc": "(Op... | view
Output Fields
Table 1287 on page 25332 lists the output fields for the show security group-vpn member kek security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1287: show security group-vpn member kek security-associations
Field Name
Field Description
Index
I... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn member policy | show security group-vpn member policy <vpn vpn-name> <group-id group-id> | Show Group VPN policies. Group VPNv2 is supported on SRX300, SRX320, SRX340, SRX345,
SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual Firewall
instances. | [
{
"name": "none",
"desc": "Display information for all groups."
},
{
"name": "vpn vpn-name",
"desc": "(Optional) Display policy information for the specified group name."
},
{
"name": "group-id group-id",
"desc": "(Optional) Display policy information for the specified group identifi... | view
Output Fields
Table 1288 on page 25338 lists the output fields for the show security group-vpn member policy command.
Output fields are listed in the approximate order in which they appear.
Table 1288: show security group-vpn member policy Output Fields
Field Name
Field Description
Group VPN Name
Group name.
Group... | Command introduced in Junos OS Release 15.1X49-D30. | [
"Group VPNv2 Overview"
] | |
show security group-vpn server ike security-associations | show security group-vpn server ike security-associations [brief | detail] [group group-name |
group-id group-id] [index sa-index] | Display IKE security associations (SAs). Group VPNv2 is supported on SRX300, SRX320, SRX340,
SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual
Firewall instances. | [
{
"name": "none",
"desc": "Display all IKE SAs for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed level of output."
},
{
"name": "group",
"desc": "(Optional) Display IKE SAs for t... | view
Output Fields
Table 1289 on page 25341 lists the output fields for the show security group-vpn server ike security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1289: show security group-vpn server ike security-associations Output Fields
Field Name
Field Descr... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn server ipsec security-associations | show security group-vpn server ipsec security-associations [brief | detail] [group group-name |
group-id group-id] | Display IPsec security associations (SAs). Group VPNv2 is supported on SRX300, SRX320, SRX340,
SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual
Firewall instances. | [
{
"name": "none",
"desc": "Display all IPsec SAs for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed level of output."
},
{
"name": "group",
"desc": "(Optional) Display IPsec SAs f... | view
Output Fields
Table 1290 on page 25348 lists the output fields for the show security group-vpn server ipsec security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1290: show security group-vpn server ipsec security-associations
Field Name
Field Description
Gro... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn server kek security-associations | show security group-vpn server kek security-associations [brief | detail] [group group-name |
group-id group-id | index sa-index] | Display configured server-member communications. Group VPNv2 is supported on SRX300, SRX320,
SRX340, SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX
Virtual Firewall instances. | [
{
"name": "none",
"desc": "Display server-member communications configured for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "group",
"desc": "(Optional) Di... | view
Output Fields
Table 1291 on page 25352 lists the output fields for the show security group-vpn server kek security-
assocations command. Output fields are listed in the approximate order in which they appear.
Table 1291: show security group-vpn server kek security-associations Output Fields
Field Name
Field Descr... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn server registered-members | show security group-vpn server registered-members <group group-name> <group-id group-id> <detail> | Display currently registered group members. Group VPNv2 is supported on SRX300, SRX320, SRX340,
SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual
Firewall instances. | [
{
"name": "none",
"desc": "Display all group members for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output."
},
{
"name": "group",
"desc": "(Optional) Display group members fo... | view
Output Fields
Table 1292 on page 25356 lists the output fields for the show security group-vpn server registered-
memberscommand. Output fields are listed in the approximate order in which they appear.
Table 1292: show security group—vpn server registered-members Output Fields
Field Name
Field Description
Group
Gr... | Command introduced in Junos OS Release 10.2. | [
"Group VPNv2 Overview"
] | |
show security group-vpn server server-cluster | show security group-vpn server server-cluster <brief> <detail> <group group-name> <group-id group-id> <peer-
gateway gateway-name> | Show information about servers in the Group VPNv2 server cluster. Group VPNv2 is supported on
SRX300, SRX320, SRX340, SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series
Firewalls and vSRX Virtual Firewall instances. | [
{
"name": "none",
"desc": "Display Group VPNv2 server cluster information for all groups."
},
{
"name": "brief",
"desc": "(Optional) Display summary output."
},
{
"name": "detail",
"desc": "(Optional) Display detailed output, including information about exchanges with peer servers in... | view
Output Fields
Table 1293 on page 25359 lists the output fields for the show security group-vpn server server-cluster
command. Output fields are listed in the approximate order in which they appear.
Table 1293: show security group-vpn server server-cluster Output Fields
Field Name
Field Description
Group
Group name... | Command introduced in Junos OS Release 15.1X49-D30. | [
"Group VPNv2 Overview",
"Understanding Group VPNv2 Server Clusters"
] | |
show security group-vpn server statistics | show security group-vpn server statistics <group group-name> <group-id group-id> | Show Group VPNv2 server statistics. Group VPNv2 is supported on SRX300, SRX320, SRX340,
SRX345, SRX550HM, SRX1500, SRX4100, SRX4200, and SRX4600 Series Firewalls and vSRX Virtual
Firewall instances. | [
{
"name": "none",
"desc": "Display Group VPNv2 server statistics for all groups."
},
{
"name": "group group-name",
"desc": "(Optional) Display Group VPNv2 server statistics for the specified group name."
},
{
"name": "group-id group-id",
"desc": "(Optional) Display Group VPNv2 server... | view
Output Fields
Table 1294 on page 25363 lists the output fields for the show security group-vpn server statistics
command. Output fields are listed in the approximate order in which they appear.
Table 1294: show security group-vpn server statistics Output Fields
Field Name
Field Description
Group
Group name.
Table... | Command introduced in Junos OS Release 15.1X49-D30. | [
"Group VPNv2 Overview",
"Understanding Group VPNv2 Server Clusters"
] | |
show security gtp counters path-rate-limit | show security gtp counters path-rate-limit | Use this command to display information about path-rate-limit counters. | [] | view
Output Fields
Table 1295 on page 25365 lists the output fields for the show security gtp counters path-rate-limit
command.
Table 1295: show security gtp counters path-rate-limit Output Fields
Field Name
Field Description
Create Request
Specify the number of create request messages received in a second after the
al... | Statement introduced in Junos OS Release 12.1X45-D10. | [] | |
show security gtp counters | show security gtp counters <all | data-packet | error | ha | message <message-name> | packet |
request | tunnel | path-rate-limit | rate-limit> | Use this command to display counters that can be used to indicate the number of GPRS tunneling
protocol (GTP) tunnel counters (allocated and freed), GTP packet counters (received, passed, and
dropped), brief message counters (receive, forward, and drop), error counters, request counters, HA
counters, and path-rate-limi... | [
{
"name": "all",
"desc": "Displays all GTP counters."
},
{
"name": "data-packet",
"desc": "Displays GTP-U data packet counters."
},
{
"name": "error",
"desc": "Displays GTP error counters."
},
{
"name": "ha",
"desc": "Displays GTP HA counters."
},
{
"name": "messa... | view
Output Fields
Table 1296 on page 25368 lists the output fields for the show security gtp counters command.
Table 1296: show security gtp counters all Output Fields
Field Name
Field Description
Tunnel counters
Tunnel counters are used to track the number of tunnels that are created on
the device.
There are two entr... | Command introduced in Junos OS Release 12.1X44-D10. Support for rate-limit option added in Junos
OS Release 20.4R1. | [] | |
show security gtp grouped-ie-profile | show security gtp grouped-ie-profile (all | <grpie-prf-name>) | Use this command to display the list of all grouped-ie profile and the list of IE number under specific
grouped-ie-profile. | [
{
"name": "all",
"desc": "Displays the list of all GTP grouped-ie-profile."
},
{
"name": "grpie-prf-name",
"desc": "Displays a specific GTP grouped-ie-profile."
}
] | View
Sample Output
show security gtp grouped-ie-profile all
user@host> show security gtp grouped-ie-profile all
GTP Profile List (id, name):
1 Bearer-ctxt-crt
2 Bearer-ctxt-rmv
show security gtp grouped-ie-profile Bearer-ctxt-crt
user@host> show security gtp grouped-ie-profile Bearer-ctxt-crt
Pr... | Command introduced in Junos OS Release 20.2R1. | [
"Example: Configure Must-IE check for GTPv1 and GTPv2"
] | |
show security gtp gsn statistics | show security gtp gsn statistics | Use this command to display a brief summary of GPRS support node (GSN) statistics, including active
GSNs, obsolete GSNs, and the usage rate of each SPU. | [] | view
Sample Output
show security gtp gsn statistics
user@host> show security gtp gsn statistics
FPC 1 PIC 0:
Active GSNs: 0 Obsolete GSNs: 0 Use rate: 0%
FPC 2 PIC 0:
Active GSNs: 0 Obsolete GSNs: 0 Use rate: 0% | Command introduced in Junos OS Release 12.1X46-D25. | [] | |
show security gtp handover-group | show security gtp handover-group | Use this command to display the handover-group of the GTP profile. A GPRS tunneling protocol (GTP)
handover group is a set of SGSNs or serving gateway (SGW) with a common address-book library. An
administrator can configure a GTP profile and associate an GTP handover group to the GTP profile.
When a GTP handover group ... | [] | view
Sample Output
show security gtp handover-group
user@host> show security gtp handover-group
All configured handover group:
Group name Address book name Address set name
handover_group_v1v2 addr_book_h roam_group_v1v2
hg_v1_h ... | Command introduced in Junos OS Release 17.4R1. | [] | |
show security gtp ie-set | show security gtp ie-set (all | <ieset-name>) | Use this command to display the list of all the GTP ieset-names and IE numbers. | [
{
"name": "all",
"desc": "Displays the list of all the GTP ieset-names."
},
{
"name": "ieset-name",
"desc": "Displays the IE numbers in an ieset."
}
] | View
Output Fields
Sample Output
show security gtp ie-set all
user@host> show security gtp ie-set all
GTP Profile List (id, name):
1 ieset-v1-r7
2 ieset-v2
show security gtp ie-set ieset-v1-r7
user@host> show security gtp ie-set ieset-v1-r7
Profile ieset-v1-r7, uid 1
IE numbers:
172, 180, 181, ... | Command introduced in Junos OS Release 20.2R1. | [
"Example: Configure IE removal for GTPv1 and GTPv2"
] | |
show security gtp ip-group | show security gtp ip-group | Use this command to get the details of the configured IP group. IP group is a list of IP addresses that
belongs to all kinds of network equipment. IP group name(s) are referenced in GTP profiles. The GTP
firewall applies configured policies in incoming and outgoing IP addresses in GPRS tunneling protocol
(GTP) messages... | [] | view
Output Fields
Table 1297 on page 25386 lists the output fields for the show security gtp ip-group command. Output
fields are listed in the approximate order in which they appear.
Table 1297: show security gtp ip-group
Field Name
Field Description
Group name
The name of the handover group on the GTP profile.
Addre... | Command introduced in Junos OS Release 19.3R1. | [] | |
show security gtp message-ie-profile-v1 | show security gtp message-ie-profile-v1 (all | <msgie-prf-v1-name> ) | Use this command to display the list of all GTPv1 message-ie profile and the list of IE numbers under a
specific GTPv1 message-ie profile. | [
{
"name": "all",
"desc": "Displays the list of all GTPv1 Message-IE profile."
},
{
"name": "msgie-prf-v1-name",
"desc": "Displays the list of IE numbers defined under a specific GTPv1 Message-IE profile."
}
] | View
Sample Output
show security gtp message-ie-profile-v1 all
user@host> show security gtp message-ie-profile-v1 all
GTPv1 Message-IE Profile List (id, name):
1 msgie-v1
show security gtp message-ie-profile-v1 msgie-v1
user@host> show security gtp message-ie-profile-v1 msgie-v1
Profile msgie-v1, uid 1
Message Num... | Command introduced in Junos OS Release 20.2R1. | [
"Example: Configure Must-IE check for GTPv1 and GTPv2"
] | |
show security gtp message-ie-profile-v2 | show security gtp message-ie-profile-v2 ( all | <msgie-prf-v2-name>) | Use this command to display the list of all GTPv2 message-ie profile and the list of IE numbers under a
specific GTPv2 message-ie profile. | [
{
"name": "all",
"desc": "Displays the list of all GTPv2 Message-IE profile."
},
{
"name": "msgie-prf-v2-name",
"desc": "Displays information of a specific GTPv2 Message-IE profile."
}
] | View
Output Fields
Sample Output
show security gtp message-ie-profile-v2 all
user@host> show security gtp message-ie-profile-v2 all
GTPv2 Message-IE Profile List (id, name):
1 msgie-v2
show security gtp message-ie-profile-v2 msgie-v2
user@host> show security gtp message-ie-profile-v2 msgie-v2
Profile msgie-v2, uid... | Command introduced in Junos OS Release 20.2R1. | [
"Example: Configure Must-IE check for GTPv1 and GTPv2"
] | |
show security gtp message-list | show security gtp message-list (all |<msg-list-name>) | Use this command to display the list of all the GTP message-list profile list. | [
{
"name": "all",
"desc": "Displays the list of all GTP message-list profile."
},
{
"name": "msg-list-name",
"desc": "Displays a specific message-list profile name."
}
] | View
Output Fields
Sample Output
show security gtp message-list all
user@host> show security gtp message-list all
GTP Message-List Profile List (id, name):
1 msg-v1
show security gtp message-list msg-v1
user@host> show security gtp message-list msg-v1
Profile msg-v1, uid 1
Message Number:
16, 20 | Command introduced in Junos OS Release 21.1R1. | [] | |
show security gtp profile | show security gtp profile (profile-name | all) | Use this command to display the GTP configuration. IP addresses in GPRS tunneling protocol (GTP)
message on Gp or the S8 interface are validated with the configured IP group list to prevent attacks. The
GTP firewall determines the IP addresses in GTP messages and matches with the configured IP group
list. Based on the ... | [
{
"name": "profile-name",
"desc": "Displays specific GTP profile."
},
{
"name": "all",
"desc": "Displays all the GTP profile list."
}
] | view
Output Fields
Table 1298 on page 25394 lists the output fields for the show security gtp profile GTP command. Output
fields are listed in the approximate order in which they appear.
Table 1298: show security gtp profile GTP
Field Name
Field Description
Index
An internal number associated with the GTP message.
Min... | Command introduced in Junos OS Release 19.3R1. The identifier option is replaced by profile-name in
Junos OS Release 20.4R1. | [] | |
show security gtp rate-limit default | show security gtp rate-limit default | Use this command to display the default message number of GTPv0, GTPv1, and GTPv2. | [
{
"name": "default",
"desc": "Displays the default message number of GTPv0, GTPv1, and GTPv2."
}
] | View
Output Fields
Sample Output
show security gtp rate-limit default
user@host> show security gtp rate-limit default
GTPv0 Message Number:
1, 16, 18, 20, 22, 24
GTPv1 Message Number:
1, 16, 20
GTPv2 Message Number:
1, 32, 34, 36, 95, 99 | Command introduced in Junos OS Release 21.1R1. | [] | |
show security gtp sctp association | show security gtp sctp association
<all>
<destination-ip>
<destination-port>
<guid>
<init-state>
<source-ip>
<source-port>
<summary> | Use this command to display the Stream Control Transmission Protocol (SCTP) association information. | [
{
"name": "none",
"desc": "Displays the live security SCTP association."
},
{
"name": "all",
"desc": "Displays information about all the SCTP associations, both initiated and live."
},
{
"name": "destination-ip",
"desc": "Displays information about the destination IP address associat... | view
Output Fields
Table 1299 on page 25407 lists the output fields for the show security gtp sctp association command.
Output fields are listed in the approximate order in which they appear.
Table 1299: show security gprs sctp association
Field Name
Field Description
Association Information
Association Information of ... | Command introduced in Junos OS Release 12.1X44-D10.
The all, destination-ip, destination-port, guid, init, source-ip, source-port, and summary options
introduced in Junos OS Release 12.1X45-D10. | [] | |
show security gtp sctp counters | show security gtp sctp counters <detail> | Use this command to display the statistics of the received and dropped Stream Control Transmission
Protocol (SCTP) chunks. | [
{
"name": "none",
"desc": "Displays the statistics of all received and dropped SCTP chunks."
},
{
"name": "detail",
"desc": "Displays detailed debugging counters for SCTP chunks."
}
] | view
Output Fields
Table 1300 on page 25410 lists the output fields for the show security gtp sctp counters command.
Output fields are listed in the approximate order in which they appear.
Table 1300: show security gtp sctp counters
Field Name
Field Description
Name
Name of the SCTP payload protocol identifier.
Receiv... | Command introduced in Junos OS Release 10.2.
Support for the detail option added in Junos OS Release 12.1X45-D10.
Support for SCTP payload protocols chunk counters added in Junos OS Release 12.1X47-D10. | [] | |
show security gtp | show security gtp apn-control {<apn-ctrl-name> | all} | Use this command to display the APN profile configuration. | [
{
"name": "aon-control-name",
"desc": "Displays specific APN profile."
},
{
"name": "all",
"desc": "Displays all the APN profile list."
}
] | view
Sample Output
Refer the following sample outputs for Junos OS Release 21.2R1.
show security gtp apn-control all (GTP Profile)
user@host> show security gtp apn-control all
GTP Profile List (id, name):
1 apn1
2 apn2
root> show security gtp apn-control apn1
APN: IoT-Greece uid: 1
Rate-Limit:
A... | [] | ||
show security host-vpn security-associations | show security host-vpn security-associations
<connection-name> | State
State of the child SA connection. Values include the following:
•
CREATED—Child SA is just created, but is not yet installed.
•
DESTROYING—Child SA object gets destroyed.
•
INSTALLED— Child SA is installed and in use.
•
REKEYING—Child SA rekeying is in progress.
mode
IPsec mode: (transport | tunnel).
in spi
Inbou... | [
{
"name": "connection-name",
"desc": "Specify for which connection the connection information is to be displayed. If no connection-name is specified, information for all security associations is displayed. Additional Information The Security Parameters Index (SPI) is an arbitrary value which is used (togeth... | view
Output Fields
Table 1301 on page 25420 describes the output fields for the how security host-vpn security-associations
command. Output fields are listed in the approximate order in which they appear.
Table 1301: show security host-vpn security-associations Output Fields
Field Name | Command introduced in Junos OS Evolved Release 18.3R1. | [
"show security host-vpn version"
] | |
show security host-vpn version | show security host-vpn version | Display the version of IPsec being used in the system. | [] | view
Sample Output
command-name
user@host> show security host-vpn version
Version: host IPsec 5.3.5 charon-systemd (Linux, 4.1.15-juniper-00909-g6846316, x86_64) | Command introduced in Junos OS Evolved Release 18.3R1. | [] | |
show security idp active-policy | show security idp active-policy | Display information about the policy name and running detector version with which the policy is
compiled from the IDP data plane module. | [] | view
Output Fields
Table 1302 on page 25424 lists the output fields for the show security idp active-policy command. Output
fields are listed in the approximate order in which they appear.
Table 1302: show security idp active-policy Output Fields
Field Name
Field Description
Policy Name
Name of the running policy.
Runn... | Command introduced in Junos OS Release 9.2.
Starting with Junos OS Release 18.2R1, IDP policy is directly assigned in the security policy rule. This is
to simplify IDP policy usage and to provide flexibility to have multiple policies active at the same time.
As a part of session interest check IDP will enabled if IDP p... | [] | |
show security idp attack attack-list policy | show security idp attack attack-list (policy Default | predefined-policy policy-name) (recursive) | Display a list of all attacks that belong to a specified IDP policy.
Specify any configured IDP policy name to determine the attacks available in that particular IDP policy. | [
{
"name": "policy Default",
"desc": "Specify the default IDP policy name."
},
{
"name": "predefined-policy policy-name",
"desc": "Specify the predefined IDP policy name."
},
{
"name": "predefined-group group-name",
"desc": "Specify the predefined IDP policy group name."
},
{
... | view
With just Rule base IDP Attacks Configured
show security idp attack attack-list policy Default
Check attack-list against the default policy.
user@host> show security idp attack attack-list policy Default
Processing your request, results will show up shortly!
Please use show security idp attack attack-list predefin... | Command introduced in Junos OS Release 18.4R1. | [] | |
show security idp attack attack-list | show security idp attack attack-list attack-group (custom-group | dynamic-group | predefined-group)attack-
group-name (recursive) | Display list of all attacks present in the attack group specified.
You can view the attacks that are available in an attack group (predefined, dynamic, and custom attack
groups). The attack option has a sub option named attack list that allows you to view attacks in an attack
group. The attack list option accommodates ... | [
{
"name": "custom-group custom-group",
"desc": "Custom group name."
},
{
"name": "dynamic-group dynamic-group",
"desc": "Dynamic group name."
},
{
"name": "predefined-group predefined-group",
"desc": "Predefined group name."
},
{
"name": "recursive",
"desc": "Recursively ... | view
Sample Output
show security idp attack attack-list predefined-group FTP
user@host> show security idp attack attack-list predefined-group FTP
Processing your request, results will show up shortly
FTP:AUDIT:REP-BINARY-DATA
FTP:AUDIT:REP-INVALID-REPLY
FTP:AUDIT:REP-NESTED-REPLY
FTP:MS-FTP:STAT-GLOB
FTP:WS-FTP:CPWD
FT... | Command introduced in Junos OS Release 18.3R1.
recursive option introduced in Junos OS and EVO Release 21.3. | [] | |
show security idp attack context | show security idp attack context | Display the contexts associated with the traffic passed through the interfaces only through the CLI pcap-
analysis. It shows information about where in the packet the attack occured.
Specify any configured IDP policy name to determine the attacks available in that particular IDP policy. | [
{
"name": "context",
"desc": "Specify the context-name, hits, and data."
}
] | view | Command introduced in Junos OS Release 20.4R1. | [] | |
show security idp attack deprecated-list | show security idp attack deprecated-list | Displays the list of signatures which are deprecated from the signature update file. The list of
deprecated attacks is updated when a new signature database is used. Use this command to find
deprecated attacks for the configured policy and deprecated lists. If any of the attacks are used in an IDP
policy and that polic... | [] | view
Sample Output
show security idp attack deprecated-list
user@host> show security idp attack deprecated-list
FTP:USER:ANONYMOUS
FTP:USER:FORMAT-STRING
FTP:USER:ROOT | Command introduced in Junos OS Release 19.1R1. | [
"IDP Signature Database Overview"
] | |
show security idp attack description | show security idp attack description attack-name | IDP attack description.
Sample Output
show security idp attack description
user@host> show security idp attack description FTP:USER:ROOT
Description: This signature detects attempts to login to an FTP server using the "root"
account. This can indicate an attacker trying to gain root-level access, or it can indicate
... | [
{
"name": "attack-name",
"desc": "IDP attack name."
}
] | view
Output Fields
Table 1303 on page 25438 lists the output fields for the show security idp attack description command.
Output fields are listed in the approximate order in which they appear.
Table 1303: show security idp attack description Output Fields
Field Name
Field Description | Command introduced in Junos OS Release 11.4. | [] | |
show security idp attack detail | show security idp attack detail attack-name | Display details of a specified IDP attack. | [
{
"name": "attack-name",
"desc": "IDP attack name."
}
] | view
Output Fields
Table 1304 on page 25440 lists the output fields for the show security idp attack detail command. Output
fields are listed in the approximate order in which they appear.
Table 1304: show security idp attack detail Output Fields
Field Name
Field Description
Display Name
Display name of the IDP attack.... | Command introduced in Junos OS Release 11.4. | [] | |
show security idp attack group-list | show security idp attack group-list attack-name | Display list of predefined attack groups to which the predefined attack belongs.
All the available predefined attacks are listed. You can select any attack and find the group to which that
attack belongs. | [
{
"name": "attack-name",
"desc": "IDP attack name."
}
] | view
Sample Output
show security idp attack group-list FTP:USER:ANONYMOUS
user@host#> show security idp attack group-list FTP:USER:ANONYMOUS
Processing your request , results will show up shortly
"Additional Web Services - Info"
"Category"
"FTP"
"FTP - All"
"FTP - Info"
"Info"
"Info - FTP" | Command introduced in Junos OS Release 18.3R1. | [
"IDP Policy Rules and IDP Rule Bases"
] | |
show security idp attack table | show security idp attack table
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the detailed information of IDP attack table and displays the IPv6 covert channels which are
identified and mitigated. | [
{
"name": "none",
"desc": "Displays the details of the IDP attack table."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the details of the IDP attack table for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optional) Display... | view
Output Fields
Table 1305 on page 25446 lists the output fields for the show security idp attack table command. Output
fields are listed in the approximate order in which they appear.
Table 1305: show security idp attack table Output Fields
Field Name
Field Description
Attack name
Name of the attack that you want t... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
IPv6 covert channels are detected in Junos OS Release 19.1R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp attacks deprecated-attacks policy policy_name | show security idp attacks deprecated-attacks policy policy_name (recursive) | Displays the list of deprecated signatures configured in the policy. The list of deprecated attacks is
updated when a new signature database is used. | [] | view
Sample Output
show security idp attack deprecated-attack-list policy
user@host> show security idp attacks deprecated-attacks policy policy_name
FTP:USER:ANONYMOUS
FTP:USER:FORMAT-STRING
FTP:USER:ROOT | Command introduced in Junos OS Release 19.1R1. | [
"IDP Signature Database Overview"
] | |
show security idp counters action | show security idp counters action
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the detailed information of IDP counter type and value. | [
{
"name": "none",
"desc": "Displays the detailed information of IDP counter type and value."
},
{
"name": "logical system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the detailed information of IDP counter type and value for a specific logical system... | view
Output Fields
Table 1306 on page 25450 lists the output fields for the show security idp counters action command.
Output fields are listed in the approximate order in which they appear.
Table 1306: show security idp counters action Output Fields
Field Name
Field Description
IDP counter type
Name of the action
Valu... | Command introduced for user logical system in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters application-identification | show security idp counters application-identification
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all IDP application identification (AI) counter values. | [
{
"name": "none",
"desc": "Displays the status of all IDP application identification (AI) counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all IDP application identification (AI) counter values f... | view
Output Fields
Table 1307 on page 25453 lists the output fields for the show security idp counters application-
identification command. Output fields are listed in the approximate order in which they appear.
Table 1307: show security idp counters application-identification Output Fields
Field Name
Field Description... | Command introduced in Junos OS Release 9.2. Modified in Junos OS Release 12.1.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters dfa | show security idp counters dfa
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all DFA counter values. | [
{
"name": "none",
"desc": "Displays the status of all DFA counter values."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the status of all DFA counter values for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optional) Displ... | view
Output Fields
Table 1308 on page 25460 lists the output fields for the show security idp counters dfa command. Output
fields are listed in the approximate order in which they appear.
Table 1308: show security idp counters dfa Output Fields
Field Name
Field Description
DFA Group Merged Usage
Number of DFA groups me... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters flow | show security idp counters flow
<logical-system (logical-system-name | all)>
<tenant tenant-name> | IDP sessions detected CPU usage
crossed intel inspect CPU
threshold
Number of IDP session detected when the CPU usage crosses the CPU
threshold of the IDP intelligent inspection.
IDP sessions detected mem drop
below intel inspect low mem
threshold
Number of IDP session detected when memory drops below the IDP
intellige... | [
{
"name": "none",
"desc": "Displays the status of all IDP flow counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all IDP flow counter values for a specific logical system."
},
{
"name": "l... | view
Output Fields
Table 1309 on page 25463 lists the output fields for the show security idp counters flow command. Output
fields are listed in the approximate order in which they appear.
Table 1309: show security idp counters flow Output Fields
Field Name | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters http-decoder | show security idp counters http-decoder
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all HTTP decoders. | [
{
"name": "none",
"desc": "Displays the status of all HTTP decoders."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the status of all HTTP decoders for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optional) Displays the st... | view
Output Fields
Table 1310 on page 25480 lists the output fields for the show security idp counters http-decoder command.
Output fields are listed in the approximate order in which they appear.
Table 1310: show security idp counters http-decoder Output Fields
Field Name
Field Description
No of file-decoder requests
... | Command introduced in Junos OS Release 11.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters ips | show security idp counters ips
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all IPS counter values. | [
{
"name": "none",
"desc": "Displays the status of all IPS counter values for root-system."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the status of all IPS counter values for a specific logical system."
},
{
"name": "logical-system all",
"desc": "... | view
Output Fields
Table 1311 on page 25484 lists the output fields for the show security idp counters ips command. Output
fields are listed in the approximate order in which they appear.
Table 1311: show security idp counters ips Output Fields
Field Name
Field Description
TCP fast path
Number of TCP packets skipped f... | Command modified in Junos OS Release 11.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters log | show security idp counters log
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all IDP log counter values. | [
{
"name": "none",
"desc": "Displays the status of all IDP log counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all IDP log counter values for a specific logical system."
},
{
"name": "log... | view
Output Fields
Table 1312 on page 25491 lists the output fields for the show security idp counters log command. Output
fields are listed in the approximate order in which they appear.
Table 1312: show security idp counters log Output Fields
Field Name
Field Description
Logs dropped
Number of logs that are dropped.
... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters memory | show security idp counters memory
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays detailed information of allocated, reallocated IDP counters memory values. | [
{
"name": "none",
"desc": "Displays detailed information of allocated, reallocated IDP counters memory values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays detailed information of allocated, reallocated IDP counters memor... | view
Output Fields
Table 1313 on page 25499 lists the output fields for the show security idp counters memory command.
Output fields are listed in the approximate order in which they appear.
Table 1313: show security idp counters memory Output Fields
Field Name
Field Description
IDP counter type
Name of the counter ty... | Command introduced for user logical systems in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters packet | show security idp counters packet
<logical-system (logical-system-name | all)>
<tenant (tenant-name | all)> | Displays the status of all IDP packet counter values. | [
{
"name": "none",
"desc": "Displays the status of all IDP packet counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all IDP packet counter values for a specific logical system."
},
{
"name"... | view
Output Fields
Table 1314 on page 25503 lists the output fields for the show security idp counters packet command.
Output fields are listed in the approximate order in which they appear.
Table 1314: show security idp counters packet Output Fields
Field Name
Field Description
Processed packets
Number of packets pro... | Command introduced in Junos OS Release 9.2.
The fields Dropped by IDP policy and Dropped by Error added in Junos OS Release 10.1.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters packet-log | show security idp counters packet-log
<logical-system (logical-system-name | all)>
<tenant (tenant-name | all)> | Displays the values of all IDP packet-log counters.
Starting in Junos OS Release 22.1R1, you can enable a secure SSL or TLS connection to send encrypted
IDP packet capture log to the packet capture receiver. To establish the SSL or TLS connection, you must
specify the SSL initiation profile that you want to use in the ... | [
{
"name": "none",
"desc": "Displays the values of all IDP packet-log counters."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the values of all IDP packet-log counters for a specific logical system."
},
{
"name": "l... | view
Output Fields
The following table lists the output fields for the show security idp counters packet-log command. Output
fields are listed in the approximate order in which they appear.
Field Name
Field Description
Total packets captured since
packet capture was activated
Number of packets captured by the device by... | Command introduced in Junos OS Release 10.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [
"IDP Security Packet Capture"
] | |
show security idp counters pdf-decoder | show security idp counters pdf-decoder
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the IDP counters value for PDF-Decode enabled sessions, requests, and memory limit IDP
counter types. | [
{
"name": "none",
"desc": "Displays the IDP counters value for PDF-Decode enabled sessions, requests, and memory limit IDP counter types."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the IDP counters value for PDF-Decode ... | view
Output Fields
Table 1315 on page 25528 lists the output fields for the show security idp counters pdf-decoder command.
Output fields are listed in the approximate order in which they appear.
Table 1315: show security idp counters pdf-decoder Output Fields
Field Name
Field Description
IDP counter type
Name of the ... | Command introduced for user logical systems in Junos OS Release 18.3R1
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters policy-manager | show security idp counters policy-manager
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all IDP policies counter values. | [
{
"name": "none",
"desc": "Displays the status of all IDP policies counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all IDP policies counter values for a specific logical system."
},
{
"n... | view
Output Fields
Table 1316 on page 25531 lists the output fields for the show security idp counters policy-manager
command. Output fields are listed in the approximate order in which they appear.
Table 1316: show security idp counters policy-manager Output Fields
Field Name
Field Description
Number of policies
Numbe... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters ssl-inspection | show security idp counters ssl-inspection
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the IDP counters value for decrypted and encrypted sessions. | [
{
"name": "none",
"desc": "Displays the IDP counters value for decrypted and encrypted sessions."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the IDP counters value for decrypted and encrypted sessions for a specific logi... | view
Output Fields
Table 1317 on page 25534 lists the output fields for the show security idp counters ssl-inspection
command. Output fields are listed in the approximate order in which they appear.
Table 1317: show security idp counters ssl-inspection Output Fields
Field Name
Field Description
IDP counter type
Name of... | Command introduced for user logical systems in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp counters tcp-reassembler | show security idp counters tcp-reassembler
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the status of all TCP reassembler counter values.
NOTE: On SRX Series Firewalls with IDP enabled, if IDP attacks are configured for a
single direction (server or client), a flow in the opposite direction does not need IDP
processing. For TCP traffic, the TCP optimization feature ensures minimal processing for
... | [
{
"name": "none",
"desc": "Displays the status of all TCP reassembler counter values."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays the status of all TCP reassembler counter values for a specific logical system."
},
{
... | view
Output Fields
Table 1318 on page 25538 lists the output fields for the show security idp counters tcp-reassembler
command. Output fields are listed in the approximate order in which they appear.
Table 1318: show security idp counters tcp-reassembler Output Fields
Field Name
Field Description
Bad TCP checksums
(Uns... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp jist-package-version | show security idp jist-package-version | Displays information of the currently installed JIST package version. | [
{
"name": "none",
"desc": "Displays information of the currently installed JIST package version."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
show security idp jist-package-version
user@host> show security idp jist-package-version
JIST package version: 3.1 | Command introduced in Junos OS Release 21.1R1. | [] | |
show security idp logical system | show security idp logical-system | Display information about the logical systems and the IDP policies associated to the logical systems. | [
{
"name": "logical-system",
"desc": "Show the IDP policy assigned to a logical system. The IDP policy is assigned to a"
},
{
"name": "policy-association",
"desc": ""
}
] | view
Sample Output
show security idp logical-system policy-association
user@host> show security idp logical-system policy-association
Logical system IDP policy
root-logical-system policy1
LSYS1 idpengine | Command introduced in Junos OS Release 18.3R1. | [] | |
show security idp logical-system policy-association | show security idp logical-system policy-association | Display the IDP policy assigned to a logical system. The IDP policy is assigned to a logical system
through the security profile. | [] | view
Output Fields
Table 1319 on page 25548 lists the output fields for the show security idp logical-system policy-association
command.
Table 1319: show security idp logical-system policy-association Output Fields
Field Name
Field Description
Logical system
Name of the logical system to which an IDP policy is assigne... | Command introduced in Junos OS Release 11.3. | [] | |
show security idp memory | show security idp memory | Display the status of all IDP data plane memory. | [] | view
Output Fields
Table 1320 on page 25549 lists the output fields for the show security idp memory command. Output fields
are listed in the approximate order in which they appear.
Table 1320: show security idp memory Output Fields
Field Name
Field Description
PIC
Name of the PIC.
Total IDP data plane memory
Total mem... | Command introduced in Junos OS Release 9.2. Percentage outputs added in Junos OS Release 10.1. | [] | |
show security idp policies | show security idp policies
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the list of currently installed policies. | [
{
"name": "none",
"desc": "Displays the list of currently installed policies."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the list of currently installed policies for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optiona... | view
Output Fields
Sample Output
show security idp policies
user@host>show security idp policies
PIC : FPC 0 PIC 0:
ID Name Sessions Memory Detector
0 idp-policy-unified 0 10179 12.6.130180509
show security idp policies logical-system LSYS0
user@host> sho... | Command introduced in Junos OS Release 10.1.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp policy-commit-status clear | show security idp policy-commit-status clear
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Clears the IDP policy commit status. | [
{
"name": "none",
"desc": "Clears the IDP policy commit status."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Clears the IDP policy commit status for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optional) Clears the IDP policy com... | clear
Output Fields
This command produces no output. | Command introduced in Junos OS Release 10.4.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp policy-commit-status | show security idp policy-commit-status
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays the IDP policy commit status. For example, status of policy compilation or load. | [
{
"name": "none",
"desc": "Displays the IDP policy commit status."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the IDP policy commit status for a specific logical system."
},
{
"name": "logical-system all",
"desc": "(Optional) Displays the IDP poli... | view
Output Fields
Sample Output
show security idp policy-commit-status
user@host> show security idp policy-commit-status
IDP policy[/var/db/idpd/bins/test.bin.gz.v] and detector[/var/db/idpd/sec-repository/installed-
detector/libidp-detector.so.tgz.v] loaded successfully.
The loaded policy size is:45583070 Bytes
... | Command introduced in JUNOS OS Release 10.4.
Starting with Junos OS Release 12.3X48-D15 and Junos OS Release 17.3R1, a new pattern matching
engine is introduced for the SRX Series IDP feature. This scanning mechanism helps improve
performance and policy loading. The new engine is 9.223 times faster than the existing DF... | [] | |
show security idp policy-templates-list | show security idp policy-templates-list | This command displays the list of available policy templates for logical systems. | [] | view
Output Fields
Sample Output
show security idp policy-templates-list
user@host>show security idp policy-templates-list
Web_Server
DMZ_Services
DNS_Service
File_Server
Getting_Started
IDP_Default
Server-Protection
Server-Protection-1G
Client-Protection
Client-Protection-1G
Client-And-Server-Protection
Client-And-Se... | Command introduced in Junos OS Release 10.1.
Command introduced for user logical system in Junos OS Release 18.3R1. | [] | |
show security idp predefined-attacks | show security idp predefined-attacks
filters ( category | severity | direction) | Display information about predefined attacks using optional filters. | [
{
"name": "filters (Optional)",
"desc": ""
},
{
"name": "category",
"desc": "Show predefined attacks in different categories."
},
{
"name": "severity",
"desc": "Show predefined attacks based on different severities."
},
{
"name": "critical",
"desc": ""
},
{
"name"... | view
Output Fields
user@host> show security idp predefined-attacks filters category APP
Sample Output
command-name
APP:AMANDA:AMANDA-ROOT-OF1
APP:AMANDA:AMANDA-ROOT-OF2
APP:ARKEIA:TYPE-77-OF
APP:CA:ALERT-SRV-OF
APP:CA:ARCSRV:TCP-BOF
APP:CA:ARCSRV:UA-OF
APP:CA:IGATEWAY-BOF
APP:CA:LIC-COMMAND-OF
APP:CA:LIC-GCR-OF
APP:CA:... | Command introduced in Junos OS Release 10.1. | [] | |
show security idp security-package-version | show security idp security-package-version
<logical-system (logical-system-name | all)>
<tenant tenant-name> | Displays information of the currently installed security package version and detector version. | [
{
"name": "none",
"desc": "Displays information of the currently installed security package version and detector version."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Displays information of the currently installed security packag... | view
Output Fields
Table 1321 on page 25562 lists the output fields for the show security idp security-package-version
command. Output fields are listed in the approximate order in which they appear.
Table 1321: show security idp security-package-version Output Fields
Field Name
Field Description
Attack database versi... | Command introduced in Junos OS Release 9.2.
logical-system option introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 19.2R1. | [] | |
show security idp ssl-inspection key | show security idp ssl-inspection key [<key-name> [server <server-ip>]] | Display SSL keys added to the system along with their associated server IP addresses. | [
{
"name": "key-name",
"desc": "(Optional) Name of SSL private key."
},
{
"name": "server server-ip",
"desc": "(Optional) Server IP address associated for specified key."
}
] | view
Output Fields
Table 1322 on page 25564 lists the output fields for the show security idp ssl-inspection key command.
Output fields are listed in the approximate order in which they appear.
Table 1322: show security idp ssl-inspection key Output Fields
Field Name
Field Description
Total SSL keys
Total number of SSL... | Command introduced in Junos OS Release 9.3. | [] | |
show security idp ssl-inspection session-id-cache | show security idp ssl-inspection session-id-cache | Display all the SSL session IDs in the session ID cache. Each cache entry is 32 bytes long. | [] | view
Output Fields
Table 1323 on page 25566 lists the output fields for the show security idp ssl-inspection session-id-cache
command. Output fields are listed in the approximate order in which they appear.
Table 1323: show security idp ssl-inspection session-id-cache Output Fields
Field Name
Field Description
Total SS... | Command introduced in Junos OS Release 9.3. | [] | |
show security idp status detail | show security idp status detail | Display statistics for each Services Processing Unit (SPU), including multiple detector information for
each SPU. | [] | view
Output Fields
Table 1324 on page 25568 lists the output fields for the show security idp attack detail command. Output
fields are listed in the approximate order in which they appear.
Table 1324: show security idp status detail Output Fields
Field Name
Field Description
PIC and FPC
Indicate the PIC and FPC used.
S... | Command introduced in Junos OS Release 10.1. Output changed to support IDP dedicated mode in
Junos OS Release 11.2. | [] | |
show security idp status | show security idp status | Display the status of the current IDP policy. | [] | view
Output Fields
Table 1325 on page 25573 lists the output fields for the show security idp status command. Output fields
are listed in the approximate order in which they appear. The following information displayed in this
command are captured at the point when IDP processes the most recent traffic:
•
Intelligent In... | Command introduced in Junos OS Release 9.2. Multiple detector information introduced in Junos OS
Release 10.1. Output changed to support IDP dedicated mode in Junos OS Release 11.2. Output
changed to support IDP intelligent inspection mode in Junos OS Release 19.2R1. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.