command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show policy | show policy
<policy-name> | Display information about configured routing policies. | [
{
"name": "none",
"desc": "List the names of all configured routing policies."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "(all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"nam... | view
Output Fields
Table 1078 on page 24108 lists the output fields for the show policy command. Output fields are listed in
the approximate order in which they appear.
Table 1078: show policy Output Fields
Field Name
Field Description
policy-name
Name of the policy listed.
term
Name of the user-defined policy term. T... | Command introduced before Junos OS Release 7.4.
statistics option introduced in Junos OS Release 16.1 for MX Series routers. | [
"show policy damping"
] | |
show ppp address-pool | show ppp address-pool pool-name
<detail> | Display PPP address pool information. | [
{
"name": "pool-name",
"desc": "Address pool name."
},
{
"name": "detail",
"desc": "(Optional) Display detailed address pool information."
}
] | view
Output Fields
Table 1079 on page 24111 lists the output fields for the show ppp address-pool command. Output fields are
listed in the approximate order in which they appear.
Table 1079: show ppp address-pool Output Fields
Field Name
Field Description
Level of Output
Address pool
Trace address pool code.
All levels... | Command introduced in Junos OS Release 7.5. | [
"Verifying and Managing PPP Configuration for Subscriber Management"
] | |
show ppp interface | show ppp interface interface-name
<extensive | terse> | Display information about PPP interfaces. | [
{
"name": "interface-name",
"desc": "Name of a logical interface. Starting in Junos OS Release 17.3, the * (asterisk) wildcard character is supported for the interface name for debugging purpose. With this support, you can match any string of characters in that position in the interface name. For example, s... | view
Output Fields
Table 1080 on page 24113 lists the output fields for the show ppp interface command. Output fields are
listed in the approximate order in which they appear.
Table 1080: show ppp interface Output Fields
Field Name
Field Description
Level of
Output
Session
Name of the logical interface on which the ses... | Command introduced in Junos OS Release 7.5. | [] | |
show ppp statistics | show ppp statistics
<detail>
<memory>
<recovery> | Display PPP interface statistics information. | [
{
"name": "detail",
"desc": "(Optional) Display the detailed statistics."
},
{
"name": "memory",
"desc": "(Optional) Display PPP process memory statistics."
},
{
"name": "recovery",
"desc": "(Optional) Display recovery state of PPP after a GRES or restart. It is safe to force another... | view
Output Fields
Table 1081 on page 24132 lists the output fields for the show ppp statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1081: show ppp statistics Output Fields
Field Name
Field Description
Level of Output
Total sessions
Number of PPP sessions on an interfac... | Command introduced in Junos OS Release 7.5. | [] | |
show ppp summary | show ppp summary | Display PPP session summary information. | [] | view
Output Fields
Table 1082 on page 24142 lists the output fields for the show ppp summary command. Output fields are
listed in the approximate order in which they appear.
Table 1082: show ppp summary Output Fields
Field Name
Field Description
Interface
Interface on which the PPP session is running. An interface typ... | Command introduced in Junos OS Release 7.5. | [] | |
show pppoe interface-sets | show pppoe interface-sets | Show interface set information | [
{
"name": "interface-set-name",
"desc": "Name of PPPoE interface set"
}
] | view
Output Fields
Interface-set
name
Name of the interface set or sets.
For ACI interface sets, the set name is prefixed with aci-.
For ALI interface sets, the set name is prefixed with the trusted option that the
interface set is based on:
•
aci-— The ACI is configured as the trusted option and ACI is received.
•
ar... | Statement introduced in Junos OS Release 7.4. | [] | |
show pppoe interfaces (Security) | show pppoe interfaces
<brief | detail | extensive>
<pp0.logical> | Display session-specific information about PPPoE interfaces. | [
{
"name": "none",
"desc": "Display interface information for all PPPoE interfaces."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "extensive",
"desc": "(Optional) Display information about the number of packets sent and receiv... | view
Output Fields
Table 1083 on page 24146 lists the output fields for the show pppoe interfaces command. Output fields are
listed in the approximate order in which they appear.
Table 1083: show pppoe interfaces Output Fields
Field Name
Field Description
Index
Index number of the logical interface, which reflects its ... | Command introduced in Junos OS Release 9.5. | [
"Understanding Ethernet Interfaces"
] | |
show pppoe interfaces | show pppoe interfaces
<brief | detail
<pp0.logical> | Display session-specific information about PPPoE interfaces. | [
{
"name": "none",
"desc": "Display interface information for all PPPoE interfaces."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "pp0.logical",
"desc": "(Optional) Name of an interface. The logical unit number for static inte... | view
Output Fields
Table 1084 on page 24151 lists the output fields for the show pppoe interfaces command. Output fields are
listed in the approximate order in which they appear. Not all fields are displayed for PPPoE interfaces on
M120 and M320 routers in server mode.
Table 1084: show pppoe interfaces Output Fields
Fi... | Command introduced before Junos OS Release 7.4. | [
"Verifying and Managing Agent Circuit Identifier-Based Dynamic VLAN Configuration"
] | |
show pppoe lockout atm-identifier | show pppoe lockout atm-identifier device-name device-name vpi vpi-identifier vci vci-identifier | Display information about the lockout condition or lockout grace period for all PPPoE subscriber
sessions associated with the specified ATM encapsulation type identifiers. Because the lockout
condition persists even in the absence of an underlying interface or after automatic removal of the
VLAN or VLAN demux interface... | [
{
"name": "device-name",
"desc": "Name of the ATM physical interface or aggregated Ethernet bundle associated with the PPPoE client for which you want to display lockout information."
},
{
"name": "vci-identifier",
"desc": "ATM VCI value associated with the PPPoE client for which you want to dis... | view
Output Fields
Table 1085 on page 24158 lists the output fields for the show pppoe lockout atm-identifier command.
Output fields are listed in the approximate order in which they appear.
Table 1085: show pppoe lockout atm-identifier Output Fields
Field Name
Field Description
underlying-
interface-name
Name of the P... | Command introduced in Junos OS Release 15.2. | [
"Verifying and Managing Dynamic PPPoE Configuration",
"Configuring Lockout of PPPoE Subscriber Sessions"
] | |
show pppoe lockout vlan-identifier | show pppoe lockout vlan-identifier device-name device-name
<svlan-id svlan-identifier>
<vlan-id vlan-identifier> | Display information about the lockout condition or lockout grace period for all PPPoE subscriber
sessions associated with the specified VLAN encapsulation type identifiers. Because the lockout
condition persists even in the absence of an underlying interface or after automatic removal of the
VLAN or VLAN demux interfac... | [
{
"name": "device-name",
"desc": "Name of the Ethernet physical interface or aggregated Ethernet bundle associated with the PPPoE client for which you want to display lockout information."
},
{
"name": "svlan-identifier",
"desc": "(Optional) A valid S-VLAN identifier associated with the PPPoE cl... | view
Output Fields
Table 1086 on page 24162 lists the output fields for the show pppoe lockout vlan-identifier command.
Output fields are listed in the approximate order in which they appear.
Table 1086: show pppoe lockout vlan-identifier Output Fields
Field Name
Field Description
underlying-
interface-name
Name of th... | Command introduced in Junos OS Release 15.2. | [
"Verifying and Managing Dynamic PPPoE Configuration",
"Configuring Lockout of PPPoE Subscriber Sessions"
] | |
show pppoe lockout | show pppoe lockout
<underlying-interface-name> | Display summary information about PPPoE clients currently undergoing lockout or currently in a lockout
grace period on all PPPoE underlying logical interfaces or on a specified PPPoE underlying logical
interface. You can configure PPPoE subscriber session lockout, also known as short-cycle protection, for
VLAN, VLAN de... | [
{
"name": "none",
"desc": "Display information about the lockout condition and the lockout grace period for PPPoE clients on all PPPoE underlying logical interfaces."
},
{
"name": "underlying-interface-name",
"desc": "(Optional) Name of the PPPoE underlying logical interface. If you do not speci... | view
Output Fields
Table 1087 on page 24166 lists the output fields for the show pppoe lockout command. Output fields are
listed in the approximate order in which they appear.
Table 1087: show pppoe lockout Output Fields
Field Name
Field Description
underlying-
interface-name
Name of the PPPoE underlying logical interf... | Command introduced in Junos OS Release 11.4. | [
"Verifying and Managing Dynamic PPPoE Configuration",
"Configuring Lockout of PPPoE Subscriber Sessions"
] | |
show pppoe service-name-tables | show pppoe service-name-tables
<table-name> | Display configuration information about PPPoE service name tables. | [
{
"name": "none",
"desc": "Display the names of configured PPPoE service name tables."
},
{
"name": "table-name",
"desc": "(Optional) Name of a configured PPPoE service name table."
}
] | view
Output Fields
Table 1088 on page 24171 lists the output fields for the show pppoe service-name-tables command. Output
fields are listed in the approximate order in which they appear.
Table 1088: show pppoe service-name-tables Output Fields
Field Name
Field Description
Level of Output
Service Name
Table
Name of th... | Command introduced in Junos OS Release 10.0. | [
"Verifying a PPPoE Configuration",
"Verifying and Managing Dynamic PPPoE Configuration"
] | |
show pppoe sessions | show pppoe sessions
<aci circuit-id-string>
<ari remote-id-string>
<service service-name> | Display information about all active PPPoE sessions on the router, or about the active PPPoE sessions
established for a specified service name, agent circuit identifier (ACI), or agent remote identifier (ARI). | [
{
"name": "none",
"desc": "Display information for all active PPPoE sessions on the router."
},
{
"name": "aci circuit-id-string",
"desc": "(Optional) Display information only for active PPPoE sessions established with the specified agent circuit identifier. The agent circuit identifier correspo... | view
Output Fields
Table 1089 on page 24175 lists the output fields for the show pppoe sessions command. Output fields are
listed in the approximate order in which they appear.
Table 1089: show pppoe sessions Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the statically-created or dynamica... | Command introduced in Junos OS Release 10.2. | [
"Verifying a PPPoE Configuration",
"Verifying and Managing Dynamic PPPoE Configuration"
] | |
show pppoe statistics | show pppoe statistics
<logical-interface-name> | Display statistics information about PPPoE interfaces. | [
{
"name": "none",
"desc": "Display PPPoE statistics for all interfaces."
},
{
"name": "logical-interface-name",
"desc": "(Optional) Name of a PPPoE underlying logical interface."
}
] | view
Output Fields
Table 1090 on page 24178 lists the output fields for the show pppoe statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1090: show pppoe statistics Output Fields
Field Name
Field Description
Active PPPoE
sessions
Total number of active PPPoE sessions and... | Command introduced before Junos OS Release 7.4.
logical-interface-name option introduced in Junos OS Release 10.1. | [] | |
show pppoe underlying-interfaces | show pppoe underlying-interfaces
<brief | detail | extensive>
<lockout>
<logical-interface-name> | Display information about PPPoE underlying interfaces. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "lockout",
"desc": "(Optional) Display summary information about the lockout condition and the lockout grace period for PPPoE clients on the PPPoE underlying interface."
},
{
... | view
Output Fields
Table 1091 on page 24181 lists the output fields for the show pppoe underlying-interfaces command.
Output fields are listed in the approximate order in which they appear.
Table 1091: show pppoe underlying-interfaces Output Fields
Field Name
Field Description
Level of Output
Underlying
Interface
Name ... | Command introduced in Junos OS Release 10.0.
lockout option added in Junos OS Release 11.4. | [
"Verifying and Managing Dynamic PPPoE Configuration",
"Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces",
"Configuring the PPPoE Family for an Underlying Interface",
"Verifying and Managing Agent Circuit Identifier-Based Dynamic VLAN Configuration",
"Verifying and Managing Configu... | |
show pppoe version | show pppoe version | ( M120 routers and M320 routers only) Display version information about PPPoE. | [] | view
Output Fields
Table 1092 on page 24191 lists the output fields for the show pppoe version command. Output fields are
listed in the approximate order in which they appear.
Table 1092: show pppoe version Output Fields
Field Name
Field Description
version n
PPPoE version number and RFC. For example, version 1, rfc 2... | Command introduced before Junos OS Release 7.4. | [] | |
show programmable-rpd clients route-summary | show programmable-rpd clients route-summary
<client-id>
<display-vni-data>
<instance instance-name>
<table table-name> | Displays the number of programmed routes for clients connected to the programmable routing protocol
process (prpd) server. The prpd provides public APIs to program routing systems, making it possible for
users to directly access the APIs to customize, create and modify behavior of their network.
You can filter the rout... | [
{
"name": "none",
"desc": "(Optional) Display the total number of programmed routes for all prpd clients."
},
{
"name": "client-id",
"desc": "(Optional) Display only the number of programmed routes for the specified prpd client."
},
{
"name": "display-vni-data",
"desc": "(Optional) D... | view
Sample Output
show programmable-rpd clients route-summary
user@host> show programmable-rpd clients route-summary
Total Programmed Route Count: 25
primary secondary
inet.0 15 0
vpnA.inet.0 0 10
client-id:... | Command introduced in Junos OS Release 22.1R1.
display-vni-data option introduced in Junos OS Release 24.2R1. | [] | |
show programmable-rpd clients | show programmable-rpd clients
<client-id> | Lists clients connected to the programmable routing protocol process (prpd) server. The prpd provides
public APIs to program routing systems, making it possible for users to directly access the APIs to
customize, create and modify behavior of their network.
The command output shows client specific details and statistic... | [
{
"name": "none",
"desc": "Display the information for all prpd clients."
},
{
"name": "client-id",
"desc": "(Optional) Display information only about the specified prpd client."
}
] | view
Sample Output
show programmable-rpd clients
user@host> show programmable-rpd clients
RPD global purge timeout: 120
RPD Server connected client details:
ClientIdentifier PurgeTimer Status Timeout Protocol Gateway
3 150 Up BGP-Static 578
2 7... | Command introduced in Junos OS Release 16.2.
client-id option introduced in Junos OS Release 22.1R1. | [] | |
show programmable-rpd statistics | show programmable-rpd statistics
flex-routes
<destination>
table | View detailed traffic statistics for programmable RPD (PRPD) flex routes. | [] | view
Sample Output
show programmable-rpd statistics flex-routes
user@host> show programmable-rpd statistics flex-routes
Table: 002f10c440414b5c9bf03bfee82b2915.inet.0
192.168.1.1/32
Packets 2570 (0 pps), Bytes 133960 (26 bps)
192.168.1.2/32
Packets 34 (0 pps), Bytes ... | Command introduced in Junos OS Release 24.2R1. | [
"Routing Protocol Process Overview"
] | |
show protection-group ethernet-ring aps | show protection-group ethernet-ring aps | Display the status of the Automatic Protection Switching (APS) and Ring APS (RAPS) messages on an
Ethernet ring. | [] | view
Output Fields
Table 1093 on page 24200 lists the output fields for the show protection-group ethernet-ring aps command.
Output fields are listed in the approximate order in which they appear.
Table 1093: show protection-group ethernet-ring aps Output Fields
Field Name
Field Description
Ethernet Ring
Name configure... | Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 18.1 for EX2300 and EX3400 switches. | [] | |
show protection-group ethernet-ring configuration | show protection-group ethernet-ring configuration | Display the configuration of Ethernet ring protection group on EX Switches and MX Series routers. | [] | view
Output Fields
Table 1094 on page 24206 lists the output fields for the show protection-group ethernet-ring configuration
command. Output fields are listed in the approximate order in which they appear.
Table 1094: show protection-group ethernet-ring configuration Output Fields
Output Fields
Field Description
G8032... | Command introduced in Junos OS Release 12.1. | [] | |
show protection-group ethernet-ring data-channel | show protection-group ethernet-ring data-channel
<brief | detail>
<group-name group-name> | Display the configuration of Ethernet ring protection group on EX Switches and MX Series routers. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "group-name",
"desc": "(Optional) Protection group for which to display statistics. If you omit this optional field, all protection group statistics for configured groups will be displayed."
}
... | view
Output Fields
Table 1095 on page 24215 lists the output fields for the show protection-group ethernet-ring data-channel
command. Output fields are listed in the approximate order in which they appear.
Table 1095: show protection-group ethernet-ring data-channel Output Fields
Field Name
Field Description
Interface
... | Command introduced in Junos OS Release 10.2. | [] | |
show protection-group ethernet-ring flush-info | show protection-group ethernet-ring flush-info | Display information about flush ports in an Ethernet ring. | [] | view
Output Fields
Table 1096 on page 24218 lists the output fields for the show protection-group ethernet-ring flush-info
command. Output fields are listed in the approximate order in which they appear.
Table 1096: show protection-group ethernet-ring flush-info Output Fields
Field Name
Field Description
Interface
Phys... | Command introduced in Junos OS Release 14.2. | [] | |
show protection-group ethernet-ring interface | show protection-group ethernet-ring interface | Displays the status of the Automatic Protection Switching (APS) interfaces on an Ethernet ring. | [] | view
Output Fields
Table 1097 on page 24221 lists the output fields for both the EX Series switch, and the ACX Series and
MX Series router show protection-group ethernet-ring interface commands. Output fields are listed in the
approximate order in which they appear.
Table 1097: MX Series Routers show protection-group e... | Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers. | [] | |
show protection-group ethernet-ring node-state | show protection-group ethernet-ring node-state | Display the status of the Automatic Protection Switching (APS) nodes on an Ethernet ring. | [] | view
Output Fields
Table 1098 on page 24226 lists the output fields for the show protection-group ethernet-ring node-state
command. Output fields are listed in the approximate order in which they appear.
Table 1098: show protection-group ethernet-ring node-state Output Fields
Field Name
Field Description
Ring Name/Ethe... | Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers. | [] | |
show protection-group ethernet-ring statistics | show protection-group ethernet-ring statistics group-name group-name
<brief | detail> | Display statistics regarding Automatic Protection Switching (APS) protection groups on an Ethernet ring. | [
{
"name": "group-name",
"desc": "Display statistics for the protection group. If you omit this option, protection group statistics for all configured groups are displayed."
},
{
"name": "brief",
"desc": "Display brief statistics for the protection group."
},
{
"name": "detail",
"desc... | view
Output Fields
Table 1099 on page 24234 lists the output fields for the show protection-group ethernet-ring statistics
command.
Table 1099: show protection-group ethernet-ring statistics Output Fields
Field Name
Field Description
Ethernet Ring Statistics for PG
Name of the protection group for which statistics are... | Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers. | [] | |
show protection-group ethernet-ring vlan | show protection-group ethernet-ring vlan
<brief | detail>
<group-name group-name> | On MX Series routers, display all data channel logical interfaces and the VLAN IDs controlled by a ring
instance data channel. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "group-name",
"desc": "(Optional) Protection group for which to display details such as data channel interfaces, vlan, and bridge-domain. If you omit this optional field, details for all configur... | view
Output Fields
Table 1101 on page 24242 lists the output fields for the show protection-group ethernet-ring vlan command.
Output fields are listed in the approximate order in which they appear.
Table 1101: show protection-group ethernet-ring vlan Output Fields
Field Name
Field Description
Interface
Name of the int... | Command introduced in Junos OS Release 10.2.
Command introduced in Junos OS Release 18.1 for EX2300 and EX3400 switches. | [] | |
show ptp aggregated-ethernet interfaces | show ptp aggregated-ethernet interfaces | Display the information related to aggregated Ethernet bundles. | [] | View
Output Fields
Table 1102 on page 24248 lists the output fields for the show ptp aggregated-ethernet interfaces command.
Output fields are listed in the approximate order in which they appear.
Table 1102: show ptp aggregated-ethernet interfaces
Field Name
Field Description
Bundle
Name of the aggregated Ethernet bu... | Command introduced in Junos OS Release 17.2R1. | [
"Precision Time Protocol Overview"
] | |
show ptp all master clock | show ptp all-master-clock | (MX240, MX480, MX960, MX2010, MX2020, MX2008, MX304, PTX10004, PTX10008, ACX7100-32,
ACX7100-48, ACX7024, ACX7509 routers) Display the details of the timeTransmitter clock configured
on the node. | [] | view
Output Fields
The Output Fields on page 24250 lists the output fields for the show ptp all-master-clock command.
Output fields are listed in the approximate order in which they appear.
Table 1103: show ptp all master clock Output Fields
Field Name
Field Description
Slot
Number of the FPC or MIC slot. If
underlying... | [] | ||
show ptp clock | show ptp clock | (ACX Series, MX80, MX240, MX480, MX960, PTX10008 routers, and QFX Series switches) Display the
details of the clock configured on the node. | [] | view
Output Fields
Table 1104 on page 24254 lists the output fields for the show ptp clock command. Output fields are listed
in the approximate order in which they appear.
Table 1104: show ptp clock Output Fields
Field Name
Field Description
Slot Number
Number of the FPC or MIC slot.
Two-step Clock
Whether the clock pr... | Command introduced in Junos OS Release 12.2. | [
"IEEE 1588v2 PTP Boundary Clock Overview",
"IEEE 1588v2 Precision Timing Protocol (PTP)",
"Precision Time Protocol Overview"
] | |
show ptp global-information | show ptp global-information | Show Precision Time Protocol (PTP)–related global information. | [] | view
Output Fields
Table 1105 on page 24260 lists the output fields for the show ptp global-information command. Output
fields are listed in the approximate order in which they appear.
Table 1105: show ptp global-information Output Fields
Field Name
Field Description
PTP Global Configuration
Displays if PTP is configur... | Command introduced in Junos OS Release 14.1X53-D25.
Output showing Syntonized Transparent Clock added in Junos OS Evolved Release 21.1R1.
SMPTE-ST 2059-2, AES67, and Combined AES67, and SMPTE-ST 2059-2 profile types are added in
Junos OS Release 21.3 R1.
Frequency lock threshold, phase adjust threshold, and phase lock ... | [
"Understanding Transparent Clocks in Precision Time Protocol",
"Configuring Transparent Clock Mode for Precision Time Protocol",
"Configuring the Precision Time Protocol G.8275.2 Enhanced Profile (Telecom Profile)"
] | |
show ptp hybrid | show ptp hybrid
<config | status> | Display the current configuration and current operation mode of the timeReceiver. | [
{
"name": "config",
"desc": "Display the PTP source to Synchronous Ethernet interface mappings."
},
{
"name": "status",
"desc": "Display the current hybrid mode operational status."
}
] | View
Output Fields
Table 1106 on page 24275 lists the output fields for the show ptp hybrid command. Output fields are
listed in the approximate order in which they appear.
Table 1106: show ptp hybrid Output Fields
Field Name
Field Description
ptp source
Displays the IP address of the PTP source.
synce source
Displays ... | Command introduced in Junos OS Release 12.2R2. | [
"Understanding Hybrid Mode"
] | |
show ptp lock-status | show ptp lock-status | Display information about the lock status of the timeReceiver. The output verifies whether the
timeReceiver is aligned to the reference (timeTransmitter clock) or not. | [
{
"name": "detail",
"desc": "Display detailed information about the lock status of the timeReceiver."
}
] | view
Output Fields
Table 1107 on page 24279 lists the output fields for the show ptp lock-status command. Output fields are
listed in the approximate order in which they appear.
Table 1107: show ptp lock-status Output Fields
Field Name
Field Description
Lock State
State of the timeReceiver clock with respect to its tim... | Command introduced in Junos OS Release 12.2. | [
"IEEE 1588v2 PTP Boundary Clock Overview",
"IEEE 1588v2 Precision Timing Protocol (PTP)",
"Precision Time Protocol Overview"
] | |
show ptp master | show ptp master
<brief |detail | interface> | Display information about the configured timeTransmitter and the status of the timeTransmitter. | [
{
"name": "brief",
"desc": "Display information about the timeTransmitter in brief."
},
{
"name": "detail",
"desc": "Display information about the timeTransmitter in detail."
},
{
"name": "interface",
"desc": "Display information about the configured interface of the timeTransmitter.... | View
Output Fields
Table 1108 on page 24288 lists the output fields for the show ptp master command. Output fields are
listed in the approximate order in which they appear.
Table 1108: show ptp primary Output Fields
Field Name
Field Description
Interface
Name of the interface configured for Precision Time Protocol (PTP... | Command introduced in Junos OS Release 12.2. | [
"Precision Time Protocol Overview",
"Configuring the Precision Time Protocol G.8275.2 Enhanced Profile (Telecom Profile)"
] | |
show ptp passive-port-monitor-status | show ptp passive-port-monitor-status | Displays the details of the PTP passive port interfaces. | [] | view
Output Fields
The Output Fields lists the output fields for the show ptp passive-port-monitor-status command. Output
fields are listed in the approximate order in which they appear.
Table 1109: show ptp passive-port-monitor-status Output Fields
Field Name
Field Description
PPM Status
Status of the PTP passive port... | Command introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp passive-port-monitor-status | show ptp passive-port-monitor-status | Display status of passive port monitoring on ports | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp path-trace detail | show ptp path-trace detail | (MX80, MX240, MX480, and MX960 routers) Display the details of the path an announce message
takes in a PTP ring topology. | [] | view
Output Fields
Table 1110 on page 24299 lists the output fields for the show ptp path-trace detail command. Output
fields are listed in the approximate order in which they appear.
Table 1110: show ptp path-trace detail Output Fields
Field Name
Field Description
Hop Count
The count of the next router in a network tr... | Command introduced in Junos OS Release 13.3R4. | [
"IEEE 1588v2 PTP Boundary Clock Overview",
"Precision Time Protocol Overview"
] | |
show ptp performance-monitor measurement 15min | show ptp performance-monitor measurement 15min <index> | Fifteen minutes measurement data for slave ports | [
{
"name": "index",
"desc": ""
},
{
"name": "0 indicates latest 15min data",
"desc": ""
},
{
"name": "1 indicates first set of 15 minutes data",
"desc": ""
},
{
"name": "2 indicates second set of 15 minutes data",
"desc": ""
},
{
"name": "3 indicates third set of 1... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp performance-monitor measurement 24h | show ptp performance-monitor measurement 24h <index> | Twenty four hour measurement data for slave ports | [
{
"name": "index",
"desc": ""
},
{
"name": "0 indicates latest 24 hours data",
"desc": ""
},
{
"name": "1 indicates first set of 24 hours data",
"desc": ""
},
{
"name": "2 indicates second set of 24 hours data",
"desc": ""
},
{
"name": "3 indicates third set of 24... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp performance-monitor statistics 15min | show ptp performance-monitor statistics 15min <index> | Display 15 minutes statistics data for slave port | [
{
"name": "index",
"desc": ""
},
{
"name": "0 indicates latest 15min data",
"desc": ""
},
{
"name": "1 indicates first set of 15 minutes data",
"desc": ""
},
{
"name": "2 indicates second set of 15 minutes data",
"desc": ""
},
{
"name": "3 indicates third set of 1... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp performance-monitor statistics 24h | show ptp performance-monitor statistics 24h <index> | Display 24 hours statistics data for slave port | [
{
"name": "index",
"desc": ""
},
{
"name": "0 indicates latest 24 hours data",
"desc": ""
},
{
"name": "1 indicates first set of 24 hours data",
"desc": ""
},
{
"name": "2 indicates second set of 24 hours data",
"desc": ""
},
{
"name": "3 indicates third set of 24... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp performance-monitor status | show ptp performance-monitor status | Display the number of 15 minutes and 24 hour data that is available | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.4R1. | [] | |
show ptp phase-error-monitoring status | show ptp phase-error-monitoring status | Show status of the phase-error monitoring feature. | [] | view
Output Fields
Table 1 on page 24307 lists the output fields for the show ptp phase-error-monitoring status command.
Output fields are listed in the approximate order in which they appear.
Table 1111: show ptp phase-error-monitoring status Output Fields
Field Name
Field Description
Status
Displays if the phase-err... | Statement introduced in Junos OS Release 25.4R1. | [
"No Link Title"
] | |
show ptp phy-timestamping-interfaces | show ptp phy-timestamping-interfaces | Display information about the interfaces that have PHY timestamping enabled. PHY timestamping is the
timestamping of the IEEE 1588 event packets at the physical layer. Timestamping the packet at the
physical layer eliminates the noise or the packet delay variation (PDV) that is introduced by the Packet
Forwarding Engin... | [] | view
Output Fields
Table 1112 on page 24310 lists the output fields for the show ptp phy-timestamping-interfaces command.
Output fields are listed in the approximate order in which they appear.
Table 1112: show-ptp-phy-timestamping-interfaces
Field Name
Field Description
PHY time-stamp
interfaces
Name of the interface ... | Command introduced in Junos OS Release 17.1R1. | [
"Precision Time Protocol Overview"
] | |
show ptp port | show ptp port
<brief | detail>
ifl logical-interface-name | Display information about the number of ports created according to the configuration. For each unique
local IP address, one Precision Time Protocol port is created. | [
{
"name": "brief",
"desc": "Display information about the PTP port in brief."
},
{
"name": "detail",
"desc": "Display information about the PTP port in detail."
},
{
"name": "logical-interface-name",
"desc": "Display PTP port information for a specific logical interface."
}
] | View
Output Fields
Table 1113 on page 24312 lists the output fields for the show ptp port command. Output fields are listed
in the approximate order in which they appear.
Table 1113: show ptp port Output Fields
Field Name
Field Description
Local Interface
Local logical interface.
Local IP
IP address of the interface ac... | Command introduced in Junos OS Release 12.2.
ifl logical-interface-name added in Junos OS Release 16.1. | [
"Precision Time Protocol Overview"
] | |
show ptp quality-level-mapping | show ptp quality-level-mapping | Display Precision Time Protocol (PTP) clock class to Ethernet Synchronization Message Channel (ESMC)
quality mapping. | [] | maintenance
Output Fields
Table 1114 on page 24319 lists the output fields for the show ptp quality-level-mapping command. Output
fields are listed in the approximate order in which they appear.
Table 1114: show ptp quality-level-mapping Output Fields
Field Name
Field Description
quality level
ESMC quality level
ptp cl... | Command introduced in Junos OS Release 12.2R2. | [
"Synchronous Ethernet Overview"
] | |
show ptp slave | show ptp slave
<brief | detail | interface> | (MX80, MX240, MX480, MX960, PTX10008 routers, and the QFX Series) Display information about the
configured timeReceiver and the status of the timeReceiver. | [
{
"name": "brief",
"desc": "Display information about the timeReceiver in detail."
},
{
"name": "detail",
"desc": "Display information about the timeReceiver in detail."
},
{
"name": "interface",
"desc": "Display information about the configured interface of the timeReceiver."
}
] | View
Output Fields
Table 1115 on page 24321 lists the output fields for the show ptp slave command. Output fields are listed
in the approximate order in which they appear.
Table 1115: show ptp client Output Fields
Field Name
Field Description
Interface
Name of the interface configured for Precision Time Protocol.
Statu... | Command introduced in Junos OS Release 12.2. | [
"Precision Time Protocol Overview",
"Configuring the Precision Time Protocol G.8275.2 Enhanced Profile (Telecom Profile)"
] | |
show ptp stateful detail | show ptp stateful detail | Display information about the stateful interfaces. | [] | view
Output Fields
Table 1116 on page 24325 lists the output fields for the show ptp stateful detail command. Output fields
are listed in the approximate order in which they appear.
Table 1116: show ptp stateful detail
Field Name
Field Description
Interface
Name of the configured stateful interface.
Status
Status of th... | Command introduced in Junos OS Release 17.1R1. | [
"Precision Time Protocol Overview"
] | |
show ptp statistics | show ptp statistics
<brief | detail> | Display information about Precision Time Protocol (PTP) statistics. | [
{
"name": "brief",
"desc": "Display brief statistics about the operation of configured PTP clocks."
},
{
"name": "detail",
"desc": "Display detailed statistics about the operation of configured PTP clocks."
}
] | view
Output Fields
Table 1117 on page 24328 lists the output fields for the show ptp statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1117: show ptp statistics Output Fields
Field Name
Field Description
Local Address
IP address of the local PTP timeTransmitter and timeR... | Command introduced in Junos OS Release 12.3. | [
"IEEE 1588v2 PTP Boundary Clock Overview",
"IEEE 1588v2 Precision Timing Protocol (PTP)"
] | |
show redundant-power-system led | show redundant-power-system led | Display information about fan status, Redundant Power System (RPS) status, and the switch connectors
as displayed by the corresponding LEDs on the RPS. | [] | view
Output Fields
Table 1118 on page 24333 lists the output fields for the show redundant-power-system led command. Output
fields are listed in the approximate order in which they appear.
Table 1118: show redundant-power-system led Output Fields
Field Name
Field Description
Level of
Output
RPS
The serial number of the... | Command introduced in Junos OS Release 12.1. | [
"LEDs on an EX Series Redundant Power System"
] | |
show redundant-power-system multi-backup | show redundant-power-system multi-backup
show redundant-power-system multi-backup member member-number | Display the current status of the Redundant Power System’s (RPS’s) ability to back up two switches per
power supply when enough power to support Power over Ethernet (PoE) is not needed. This ability is
referred to as the RPS’s multi-backup ability. | [] | view
Sample Output
show redundant-power-system multi-backup
User@switch> show redundant-power-system multi-backup
Requesting information from redundant-power-system.. Multi-Backup: enabled | Command introduced in Junos OS Release 12.1. | [] | |
show redundant-power-system network | show redundant-power-system network | Display the Redundant Power Supply (RPS) IP address, netmask address, and gateway address required
for firmware backup. | [] | view
Sample Output
show redundant-power-system network
user@switch> show redundant-power-system network
Requesting information from redundant-power-system..
IP Address: 10.93.2.38
Netmask: 255.255.254.0
Gateway: 10.93.3.254 | Command introduced in Junos OS Release 12.1. | [
"Upgrading Firmware on an EX Series Redundant Power System"
] | |
show redundant-power-system power-supply | show redundant-power-system power-supply | Description of the RPS power supply installed in the slot.
All levels
Sample Output
show redundant-power-system power-supply (Standalone Switch)
user@switch> show redundant-power-system power-supply
Gathering requested information.
RPS-CG0209121807
PSU Slot Status Description
1 Online 930W AC ... | [] | view
Output Fields
Table 1119 on page 24339 lists the output fields for the show redundant-power-system power-supply command.
Output fields are listed in the approximate order in which they appear.
Table 1119: show redundant-power-system power-supply Output Fields
Field Name
Field Description
Level of Output
RPS
Serial... | Command introduced in Junos OS Release 12.1. | [
"Installing a Power Supply in the EX Series Redundant Power System"
] | |
show redundant-power-system status | show redundant-power-system status | Display the status information for the switch connectors on the Redundant Power System (RPS). | [] | view
Output Fields
Table 1120 on page 24342 lists the output fields for the show redundant-power-system status command.
Output fields are listed in the approximate order in which they appear.
Table 1120: show redundant-power-system status Output Fields
Field Name
Field Description
Level of Output
RPS
Serial number of t... | Command introduced in Junos OS Release 12.1. | [
"Determining and Setting Priority for Switches Connected to an EX Series RPS",
"Installing a Power Supply in the EX Series Redundant Power System"
] | |
show redundant-power-system upgrade | show redundant-power-system upgrade | Display RPS firmware upgrade status (pass or fail), previous RPS firmware version, and current RPS
firmware version. | [] | view
Output Fields
Table 1121 on page 24345 lists the output fields for the show redundant-power-system status command.
Output fields are listed in the approximate order in which they appear.
Table 1121: show redundant-power-system upgrade Output Fields
Field Name
Field Description
Level of Output
Firmware Upgrade Sta... | Command introduced in Junos OS Release 12.1. | [] | |
show redundant-power-system version | show redundant-power-system version | Display version information about the Redundant Power System (RPS). | [] | view
Output Fields
Table 1122 on page 24346 lists the output fields for the show redundant-power-system version command.
Output fields are listed in the approximate order in which they appear.
Table 1122: show redundant-power-system version Output Fields
Field Name
Field Description
Level of Output
RPS
Serial number of... | Command introduced in Junos OS Release 12.1. | [
"Installing a Power Supply in the EX Series Redundant Power System",
"Packing an EX Series Redundant Power System or Redundant Power System Components for",
"Shipping"
] | |
show redundant-trunk-group | show redundant-trunk-group <group-name group-name> | Display information about redundant trunk groups. | [
{
"name": "group-name group-name",
"desc": "Display information about the specified redundant trunk group."
}
] | view
Output Fields
Table 1123 on page 24349 lists the output fields for the show redundant-trunk-group command. Output
fields are listed in the approximate order in which they appear.
Table 1123: show redundant-trunk-group Output Fields
Field Name
Field Description
Group name
Name of the redundant trunk port group.
Int... | Command introduced in Junos OS Release 9.0. | [
"Example: Configuring Redundant Trunk Links for Faster Recovery on EX Series Switches",
"Example: Configuring Redundant Trunk Links for Faster Recovery on Devices with ELS Support",
"Understanding Redundant Trunk Links (Legacy RTG Configuration)"
] | |
show remote-device-management service-devices | show remote-device-management service-devices
name
<detail> | Display information about all remote service devices or a specific remote service device. | [
{
"name": "none",
"desc": "Display summary information about all remote service devices."
},
{
"name": "detail",
"desc": "Display detailed information about remote service devices."
},
{
"name": "name",
"desc": "Name of the remote service device."
}
] | view
Output Fields
Table 1124 on page 24351 lists the output fields for the show remote-device-management service-devices
command. Output fields are listed in the approximate order in which they appear.
Table 1124: show remote-device-management service-devices Output Fields
Field Name
Field Description
Level of Output
... | Command introduced in Junos OS Release 18.3R1. | [] | |
show remote-device-management services | show remote-device-management services
session-id id-number
<detail> | Display information about all service sessions or a specific service session on remote service devices. | [
{
"name": "none",
"desc": "Display summary information about all remote service sessions."
},
{
"name": "detail",
"desc": "Display detailed information about remote service sessions."
},
{
"name": "session-id id-number",
"desc": "Identification number for the service session."
}
] | view
Output Fields
Table 1125 on page 24361 lists the output fields for the show remote-device-management services command.
Output fields are listed in the approximate order in which they appear.
Table 1125: show remote-device-management services Output Fields
Field Name
Field Description
Level of Output
Service Sessi... | Command introduced in Junos OS Release 18.3R1. | [] | |
show remote-device-management statistics | show remote-device-management statistics
(summary | service-devices device-name) | Display a global summary of service statistics for all remote devices or detailed statistics for a specific
remote service device. | [
{
"name": "service-devices device-name",
"desc": "Display statistics for the specified service device."
},
{
"name": "summary",
"desc": "Display a summary of service statistics for all remote devices."
}
] | view
Output Fields
Table 1126 on page 24365 lists the output fields for the show remote-device-management statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1126: show remote-device-management statistics Output Fields
Field Name
Field Description
Service Activations
Statu... | Command introduced in Junos OS Release 18.3R1. | [] | |
show remote-device-management subscribers | show remote-device-management subscribers
session-id id-number
<detail> | Display information about service sessions for all subscriber sessions or about all service sessions for a
specific subscriber session on remote service devices. | [
{
"name": "none",
"desc": "Display summary information about remote service sessions for all subscribers."
},
{
"name": "detail",
"desc": "Display detailed information about remote service sessions for all subscribers."
},
{
"name": "session-id id-number",
"desc": "Identification num... | view
Output Fields
Table 1127 on page 24370 lists the output fields for the show remote-device-management subscribers
command. Output fields are listed in the approximate order in which they appear.
Table 1127: show remote-device-management subscribers Output Fields
Field Name
Field Description
Level of Output
Subscri... | Command introduced in Junos OS Release 18.3R1. | [] | |
show remote-device-management summary | show remote-device-management summary; | Display summary information about the remote service devices, such as session state and service state. | [] | view
Output Fields
Table 1128 on page 24374 lists the output fields for the show remote-device-management summary command.
Output fields are listed in the approximate order in which they appear.
Table 1128: show remote-device-management summary Output Fields
Field Name
Field Description
Service Devices by Connection
S... | Command introduced in Junos OS Release 18.3R1. | [] | |
show resource-manager cpu | show resource-manager cpu | This command displays the CPU utilization. | [] | view
Sample Output
show resource-manager cpu
user@host> show resource-manager cpu
fpc 0 pic 0
CPU Threshold exceeded :0
CPU threshold Clear :0
Drop flows :0
Throttled Sessions :0
Packets Dropped :0
Alarm Sent :0
Messages logged :0 | Command introduced in Junos OS Release 20.4R1. | [
"Traffic Processing on SRX Series Devices Overview"
] | |
show resource-manager memory | show resource-manager memory | Display the CPU and memory utilization. | [] | view
Sample Output
show resource-manager memory
user@host> show resource-manager memory
fpc 0 pic 0
Session Low Watermark Hit :0
Session High Watermark Hit :0
Memory Threshold exceeded :15
Memory threshold Clear :14
Early Session Aged Out :0
Drop flows :0
Fail Open :0
Fail Close :167814
Alarm Sent :15
Messag... | Command introduced in Junos OS Release 20.4R1. | [
"Traffic Processing on SRX Series Devices Overview"
] | |
show resource-manager | show resource-manager | Display the CPU and memory utilization. | [] | view
Sample Output
show resource-manager
user@host> show resource-manager
FPC 0 PIC 0
Services Memory: 0 %
Packet Memory: 0 %
Session created: 631829
THREAD 0
Last Minute CPU Average %: 0 | Command introduced in Junos OS Release 20.4R1. | [
"Traffic Processing on SRX Series Devices Overview"
] | |
show rift database | show rift database
content
statistics | Display Routing in Fat Trees (RIFT) protocol link-state database information. You can use this information
for debugging purpose. | [
{
"name": "content",
"desc": "Display RIFT link-state database topology information element (TIE) headers information."
},
{
"name": "statistics",
"desc": "Display RIFT link-state database information."
}
] | view
Output Fields
Table 1129 on page 24382 lists the output fields for the show rift database content command. Output
fields are listed in the approximate order in which they appear.
Table 1129: show rift database content Output Fields
Field Name
Field Description
Dir
Direction of Topology information element (TIE).
... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift flood-reduction | show rift flood-reduction
statistics | Display Routing in Fat Trees (RIFT) protocol flood-reduction information. | [
{
"name": "statistics",
"desc": "Display RIFT flood-reduction statistics."
}
] | view
Output Fields
Table 1131 on page 24386 lists the output fields for the show rift flood-reduction statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1131: show rift flood-reduction statistics Output Fields
Field Name
Field Description
Runs
Number of runs.
Holds
Number... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift interface | show rift interface
statistics
status | Display Routing in Fat Trees (RIFT) protocol interface information. | [
{
"name": "statistics",
"desc": "Display RIFT interface statistics."
},
{
"name": "status",
"desc": "Display status of RIFT interfaces."
}
] | view
Output Fields
Table 1132 on page 24388 lists the output fields for the show rift interface statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1132: show rift interface statistics Output Fields
Field Name
Field Description
Started
Date and time when the statistics was... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift node | show rift node
statistics
status | Display Routing in Fat Trees (RIFT) protocol node information. | [
{
"name": "statistics",
"desc": "Display RIFT node statistics."
},
{
"name": "status",
"desc": "Display RIFT node status."
}
] | view
Output Fields
Table 1134 on page 24395 lists the output fields for the show rift node statistics command. Output fields
are listed in the approximate order in which they appear.
Table 1134: show rift node statistics Output Fields
Field Name
Field Description
Starttime
Time the statistics started.
Servicce Requests... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift path-computation | show rift path-computation
statistics | Display Routing in Fat Trees (RIFT) protocol path-computation information. | [
{
"name": "statistics",
"desc": "Display RIFT path computation statistics."
}
] | view
Output Fields
Table 1136 on page 24399 lists the output fields for the show rift path-computation statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1136: show rift path-computation statistics Output Fields
Field Name
Field Description
Dir
Direction of path computati... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift routes | show rift routes
content
next-hops
statistics | Display the routing table information of the Routing in Fat Trees (RIFT) protocol. | [
{
"name": "content",
"desc": "Display all route information of the RIFT protocol."
},
{
"name": "next-hops",
"desc": "Display next-hop information of the RIFT protocol."
},
{
"name": "statistics",
"desc": "Display the routing table statistics of the RIFT protocol."
}
] | view
Output Fields
Table 1137 on page 24401 lists the output fields for the show rift routes content command. Output fields
are listed in the approximate order in which they appear.
Table 1137: show rift routes content Output Fields
Field Name
Field Description
Prefix
IPv4 or IPv6 prefix address.
Active
Type of active ... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift tie | show rift tie tie | Display Routing in Fat Tress (RIFT) topology information element (TIE) information. | [
{
"name": "tie",
"desc": "Display information of the RIFT TIE in the following format: (node-hex | node-name)/(North | South)/(node | prefix | positive | negative | key-value |"
},
{
"name": "external)/TIE-number-hex",
"desc": "Where:"
},
{
"name": "(node-hex | node-name)",
"desc": "... | view
Output Fields
Table 1140 on page 24405 lists the output fields for the show rift tie command. Output fields are listed
in the approximate order in which they appear.
Table 1140: show rift tie Output Fields
Field Name
Field Description
TIE ID
Identification of TIE.
Content
Content of TIE as python parsable structur... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift topology | show rift topology
nodes | Display the Routing in Fat Trees (RIFT) topology information. | [
{
"name": "nodes",
"desc": "Display information for all visible RIFT nodes."
}
] | view
Output Fields
Table 1141 on page 24407 lists the output fields for the show rift topology nodes command. Output fields
are listed in the approximate order in which they appear.
Table 1141: show rift topology nodes Output Fields
Field Name
Field Description
Lvl
RIFT node level.
Name
RIFT node name.
Originator
Node ... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rift versions | show rift versions
info | Display various package version of the Routing in Fat Trees (RIFT) protocol. | [
{
"name": "info",
"desc": "Display RIFT package information."
}
] | view
Output Fields
Table 1142 on page 24410 lists the output fields for the show rift versions info command. Output fields
are listed in the approximate order in which they appear.
Table 1142: show rift versions info Output Fields
Field Name
Field Description
Package
RIFT package version.
Build Date
Date and time of th... | Command introduced in Junos OS Release 19.4R1. | [
"Understanding Junos Implementation of Routing in Fat Tree (RIFT) Protocol"
] | |
show rip general-statistics | show rip general-statistics | Display brief RIP statistics. | [
{
"name": "none",
"desc": "Display brief RIP statistics."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 1143 on page 24413 lists the output fields for the show rip general-statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1143: show rip general-statistics Output Fields
Field Name
Field Description
bad msgs
Number of invalid messages received.
no re... | Command introduced before Junos OS Release 7.4. | [] | |
show rip neighbor | show rip neighbor
<instance (all | instance-name)>
<name> | Display information about RIP neighbors. | [
{
"name": "none",
"desc": "Display information about all RIP neighbors for all instances."
},
{
"name": "instance (all | instance-name)",
"desc": "(Optional) Display RIP neighbor information for all instances or for only the specified routing instance."
},
{
"name": "logical-system (all ... | view
Output Fields
Table 1144 on page 24415 lists the output fields for the show rip neighbor command. Output fields are
listed in the approximate order in which they appear.
Table 1144: show rip neighbor Output Fields
Field Name
Field Description
Neighbor
Name of the RIP neighbor.
NOTE: Beginning with Junos OS Release... | Command introduced before Junos OS Release 7.4. | [] | |
show rip statistics | show rip statistics
<instance (all | instance-name)>
<name> | Display RIP statistics about messages sent and received on an interface, as well as information received
from advertisements from other routing devices. | [
{
"name": "none",
"desc": "Display RIP statistics for all routing instances."
},
{
"name": "instance (all | instance-name)",
"desc": "(Optional) Display RIP statistics for all instances or for only the specified routing instance."
},
{
"name": "logical-system (all | logical-system-name)"... | view
Output Fields
Table 1145 on page 24419 lists the output fields for the show rip statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1145: show rip statistics Output Fields
Field Name
Field Description
RIP info
Information about RIP on the specified interface:
•
port—U... | Command introduced before Junos OS Release 7.4. | [] | |
show ripng general-statistics | show ripng general-statistics | Display general RIP next-generation (RIPng) statistics. | [
{
"name": "none",
"desc": "Display general RIPng statistics."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | view
Output Fields
Table 1146 on page 24423 lists the output fields for the show ripng general-statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1146: show ripng general-statistics Output Fields
Field Name
Field Description
bad msgs
Number of invalid messages received.
no... | Command introduced before Junos OS Release 7.4. | [] | |
show ripng neighbor | show ripng neighbor
<name> | Display information about RIP next-generation (RIPng) neighbors. | [
{
"name": "none",
"desc": "Display information about all RIPng neighbors."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": ... | view
Output Fields
Table 1147 on page 24425 lists the output fields for the show ripng neighbor command. Output fields are
listed in the approximate order in which they appear.
Table 1147: show ripng neighbor Output Fields
Field Name
Field Description
Neighbor
Name of RIPng neighbor.
State
State of the connection: Up o... | Command introduced before Junos OS Release 7.4. | [] | |
show ripng statistics | show ripng statistics
<name> | Display RIP next generation (RIPng) statistics about messages sent and received on an interface, as well
as information received from advertisements from other routing devices. | [
{
"name": "none",
"desc": "Display RIPng statistics for all neighbors."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": "na... | view
Output Fields
Table 1148 on page 24428 lists the output fields for the show ripng statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1148: show ripng statistics Output Fields
Field Name
Field Description
RIPng info
Information about RIPng on the specified interface:
... | Command introduced before Junos OS Release 7.4. | [] | |
show route active-path | show route active-path
<brief | detail | extensive | terse> | Display all active routes for destinations. An active route is a route that is selected as the best path.
Inactive routes are not displayed. | [
{
"name": "none",
"desc": "Display all active routes."
},
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "logical-system (all | logical-system-... | view
Output Fields
For information about output fields, see the output field tables for the show route command, the show route
detail command, the show route extensive command, or the show route terse command.
Sample Output
show route active-path
user@host> show route active-path
inet.0: 7 destinations, 7 routes (... | Command introduced in Junos OS Release 8.0. | [] | |
show route advertising-protocol | show route advertising-protocol protocol neighbor-address
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)> | Display the routing information as it has been prepared for advertisement to a particular neighbor of a
particular dynamic routing protocol. | [
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | terse",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all l... | view
Output Fields
Table 1149 on page 24439 lists the output fields for the show route advertising-protocol command. Output
fields are listed in the approximate order in which they appear.
Table 1149: show route advertising-protocol Output Fields
Field Name
Field Description
Level of Output
routing-table-
name
Name of ... | Command introduced before Junos OS Release 7.4.
ipv6-origin, ipv6-target, and ipv6-extended Community output fields supported in Junos OS Release and Junos
OS Evolved Release 23.1. | [
"Example: Configuring the MED Attribute That Determines the Exit Point in an AS"
] | |
show route all | show route all | Display information about all routes in all routing tables, including private, or internal, tables. | [
{
"name": "none",
"desc": "Display information about all routes in all routing tables, including private, or internal, tables."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or o... | view
Output Fields
In Junos OS Release 9.5 and later, only the output fields for the show route all command display all
routing tables, including private, or hidden, routing tables. The output field table of the "show route" on
page 24744 command does not display entries for private, or hidden, routing tables in Junos ... | Command introduced before Junos OS Release 7.4. | [] | |
show route aspath-regex | show route aspath-regex regular-expression | Display the entries in the routing table that match the specified autonomous system (AS) path regular
expression. | [
{
"name": "regular-expression",
"desc": "Regular expression that matches an entire AS path."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system. Additional Information You can specify a re... | view
Output Fields
For information about output fields, see the output field table for the "show route" on page 24744
command.
Sample Output
show route aspath-regex (Matching a Specific AS Number)
user@host> show route aspath-regex 65477
inet.0: 46411 destinations, 46411 routes (46409 active, 0 holddown, 2 hidden)
+... | Command introduced before Junos OS Release 7.4. | [
"Example: Using AS Path Regular Expressions"
] | |
show route best | show route best destination-prefix
<brief | detail | extensive | terse> | Display the route in the routing table that is the best route to the specified address or range of
addresses. The best route is the longest matching route. | [
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "destination-prefix",
"desc": "Address or range of addresses."
},
{
"name": "logical-system (all... | view
Output Fields
For information about output fields, see the output field tables for the show route command, the show route
detail command, the show route extensive command, or the show route terse command.
Sample Output
show route best
user@host> show route best 10.255.70.103
inet.0: 24 destinations, 25 routes ... | Command introduced before Junos OS Release 7.4. | [] | |
show route brief | show route brief
<destination-prefix> | Display brief information about the active entries in the routing tables. | [
{
"name": "none",
"desc": "Display all active entries in the routing table."
},
{
"name": "destination-prefix",
"desc": "(Optional) Display active entries for the specified address or range of addresses."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) ... | view
Output Fields
For information about output fields, see the Output Field table of the show route command.
Sample Output
show route brief
user@host> show route brief
inet.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 1w5d ... | Command introduced before Junos OS Release 7.4. | [] | |
show route ccc | show route ccc ccc
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)> | Display circuit cross-connect (CCC) entries in the Multiprotocol Link Switching (MPLS) routing table. | [
{
"name": "ccc",
"desc": "Name of an entry with a circuit cross-connect interface."
},
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform th... | view
Output Fields
For information about output fields, see the output field tables for the "show route" on page 24744
command, the "show route detail" on page 24478 command, the "show route extensive" on page 24531
command, or the "show route terse" on page 24733 command.
Sample Output
show route ccc extensive
user@h... | Command introduced before Junos OS Release 7.4. | [] | |
show route community | show route community as-number:community-value
<brief | detail | extensive | terse> | Display the route entries in each routing table that are members of a Border Gateway Protocol (BGP)
community. | [
{
"name": "as-number:community-value",
"desc": "One or more community identifiers. as-number is the AS number, and community-value is the community identifier. When you specify more than one community identifier, enclose the identifiers in double quotation marks. Community identifiers can include wildcards.... | view
Output Fields
For information about output fields, see the output field tables for the "show route" on page 24744
command, the "show route detail" on page 24478 command, the "show route extensive" on page 24531
command, or the "show route terse" on page 24733 command.
Sample Output
show route community
user@host>... | Command introduced before Junos OS Release 7.4. | [] | |
show route community-name | show route community-name community-name
<brief | detail | extensive | terse> | Display the route entries in each routing table that are members of a Border Gateway Protocol (BGP)
community, specified by a community name. | [
{
"name": "community-name",
"desc": "Name of the community."
},
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all log... | view
Output Fields
For information about output fields, see the output field tables for the "show route" on page 24744
command, the "show route detail" on page 24478 command, the "show route extensive" on page 24531
command, or the "show route terse" on page 24733 command.
Sample Output
show route community-name
user@... | Command introduced before Junos OS Release 7.4. | [] | |
show route cumulative | show route cumulative
<fabric>
<logical-system (all | logical-system-name)>
<vpn-family (inet.0 | inet6.0)> | Shows the cumulative number of either IPv4 or IPv6 routes in the VRF table. | [
{
"name": "fabric",
"desc": "Internal fabric state."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Show cumulative routes on all logical systems or on a particular logical system."
},
{
"name": "vpn-family (inet.0 | inet6.0)",
"desc": "Enter inet.0 fo... | view
Output Fields
Field Name
Field Description
destinations
Number of destinations for which there are VRF routes in the routing table.
routes
Number of VRF routes in the routing table:
•
active—Number of routes that are active.
•
holddown—Number of VRF routes that are in the hold-down state before being declared
inac... | Command introduced in Junos OS Release 13.3. | [] | |
show route damping | show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse> | Display the BGP routes for which updates might have been reduced because of route flap damping. | [
{
"name": "brief | detail | extensive",
"desc": ""
},
{
"name": "| terse",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "decayed",
"desc": "Display route damping entries that might no l... | view
Output Fields
Table 1150 on page 24471 lists the output fields for the show route damping command. Output fields are
listed in the approximate order in which they appear.
Table 1150: show route damping Output Fields
Field Name
Field Description
Level of Output
routing-table-
name
Name of the routing table—for exa... | Command introduced before Junos OS Release 7.4. | [
"clear bgp damping"
] | |
show route detail | show route detail
<destination-prefix> | Validation State
Displays the origin validation information for each route entry and a reason code if the
route is marked invalid. The possible reasons for an invalid route entry include mismatch
due to origin-as or due to maximum-length.
Sample Output
show route detail
user@host> show route detail
inet.0: 22 desti... | [
{
"name": "none",
"desc": "Display all active entries in the routing table on all systems."
},
{
"name": "destination-prefix",
"desc": "(Optional) Display active entries for the specified address or range of addresses."
},
{
"name": "logical-system (all | logical-system-name)",
"desc... | view
Output Fields
Table 1151 on page 24479 describes the output fields for the show route detail command. Output fields
are listed in the approximate order in which they appear.
Table 1152 on page 24489 describes all possible values for the Next-hop Types output field.
Table 1153 on page 24491 describes all possible v... | Command introduced before Junos OS Release 7.4.
Comand introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
DeletePending flag added to the command output in Junos OS Release 19.4R1.
ipv6-origin, ipv6-target, and ipv6-extended Community output fields supported in Junos OS Release and Junos
OS Evolved Release ... | [] | |
show route exact | show route exact destination-prefix
<brief | detail | extensive | terse> | Display only the routes that exactly match the specified address or range of addresses. | [
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "destination-prefix",
"desc": "Address or range of addresses."
},
{
"name": "logical-system (all... | view
Output Fields
For information about output fields, see the output field tables for the show route command, the show route
detail command, the show route extensive command, or the show route terse command.
Sample Output
show route exact
user@host> show route exact 207.17.136.0/24
inet.0: 24 destinations, 25 rou... | Command introduced before Junos OS Release 7.4. | [] | |
show route export vrf-target | show route export vrf-target
<brief | detail>
<community community--regular-expression>
<logical-system (all | logical-system-name)> | Display the VPN routing and forwarding (VRF) target communities for which policy-based route export
is currently distributing routes. This command is relevant when there are overlapping virtual private
networks (VPNs). | [
{
"name": "none",
"desc": "Display standard information about all target communities."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "community community-regul... | view
Output Fields
Table 1155 on page 24520 lists the output fields for the show route export vrf-target command. Output
fields are listed in the approximate order in which they appear.
Table 1155: show route export vrf-target Output Fields
Field Name
Field Description
Level of Output
Route target
Target communities f... | Command introduced before Junos OS Release 7.4. | [] | |
show route export | show route export
<brief | detail>
<instance <instance-name> | routing-table-name> | Display policy-based route export information. Policy-based export simplifies the process of exchanging
route information between routing instances. | [
{
"name": "the feature handles:",
"desc": ""
},
{
"name": "unicast",
"desc": "Indicates instance.inet.0."
},
{
"name": "multicast",
"desc": "Indicates instance.inet.2."
},
{
"name": "unicast multicast",
"desc": "Indicates instance.inet.0 and instance.inet.2."
},
{
... | view
Output Fields
Table 1156 on page 24523 lists the output fields for the show route export command. Output fields are
listed in the approximate order in which they appear.
Table 1156: show route export Output Fields
Field Name
Field Description
Level of
Output
Table or table-
name
Name of the routing tables that eit... | Command introduced before Junos OS Release 7.4. | [] | |
show route extensive <route> expanded-nh | show route <IPv4/IPv6 route> extensive expanded-nh | Displays the slice and/or the firewall filter attached to a specific route through routing-options
forwarding-table export policy.
Additional Information
Issue show route extensive expanded-nh to display the slice and/or the firewall filter attached to all the routes
through routing-options forwarding-table export poli... | [] | view
Output Fields
Table 1157 on page 24526 lists the output fields for the show route <route> extensive expanded-nh command.
Table 1157: show route <route> extensive expanded-nh Output Fields
Field Name
Field Description
slice-id
ID assigned to the slice
gencfg-id
ID of the slice-gencfg created within RPD
Table 1157:... | Command introduced in JUNOS 22.2R1 | [] | |
show route extensive | show route extensive
<destination-prefix> | Display extensive information about the active entries in the routing tables. | [
{
"name": "none",
"desc": "Display all active entries in the routing table."
},
{
"name": "destination-prefix",
"desc": "(Optional) Display active entries for the specified address or range of addresses."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) ... | view
Output Fields
Table 1158 on page 24533 describes the output fields for the show route extensive command. Output
fields are listed in the approximate order in which they appear.
Table 1158: show route extensive Output Fields
Field Name
Field Description
routing-table-name
Name of the routing table (for example, in... | Command introduced before Junos OS Release 7.4.
DeletePending flag added to the command output in Junos OS Release 19.4R1. | [] | |
show route flow validation | show route flow validation
<brief | detail>
<ip-prefix>
<table table-name> | Display flow route information. | [
{
"name": "none",
"desc": "Display flow route information."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief."
},
{
"name": "ip-prefix",
"desc": "(Optional) IP address for t... | view
Output Fields
Table 1159 on page 24558 lists the output fields for the show route flow validation command. Output
fields are listed in the approximate order in which they appear.
Table 1159: show route flow validation Output Fields
Field Name
Field Description
Level of Output
routing-table-
name
Name of the routi... | Command introduced before Junos OS Release 7.4. | [] | |
show route forwarding-table family fibre-channel | show route forwarding-table family fibre-channel
<brief | detail | extensive>
<all>
<destination destination-prefix>
<interface-name interface-name>
<label label>
<matching ip-prefix>
<multicast>
<summary>
<table routing-table-name>
<vlan vlan-name>
<vpn vpn-instance-name> | Display Fibre Channel family forwarding table route information. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "all",
"desc": "Display all routing forwarding tables."
},
{
"name": "destination destination-prefix",
"desc": "Destination prefix."
},
{
"name": "interface-name i... | view
Output Fields
Table 1160 on page 24561 lists the output fields for the show route forwarding-table family fibre-channel
command. Output fields are listed in the approximate order in which they appear.
Table 1160: show route forwarding-table family fibre-channel Output Fields
Field Name
Field Description
Routing ta... | Command introduced in Junos OS Release 11.1. | [] | |
show route forwarding-table interface-name | show route forwarding-table interface-name interface-name
<detail | extensive>
<all> | Display the interfaces in the Routing Engine's forwarding table. | [
{
"name": "none",
"desc": "Display information for the specified interface."
},
{
"name": "detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "all",
"desc": "(Optional) Display all interfaces in the routing table."
}
] | view
Output Fields
Table 1161 on page 24564 lists the output fields for the show route forwarding-table interface-name
command. Output fields are listed in the approximate order in which they appear.
Table 1161: show route forwarding-table interface-name Output Fields
Field Name
Field Description
Level of Output
Name
N... | Command introduced in Junos OS Release 9.6. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.