command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show security ike active-peer | show security ike active-peer
<peer-address>
<aaa-username username>
<brief | detail>
<debug>
local-address IP address
local-ike-id IKE ID
local-port port number (1..65535)
<fpc slot-number pic slot-number>
<ike-id IKE-ID>
<kmd-instance (all | kmd-instance-name)>
<node-local>
<pic slot-number fpc slot-number>
<port po... | Display the list of connected active users with details about the peer addresses and ports they are using. | [
{
"name": "peer-address",
"desc": "(Optional) Display details about the user with the specified peer address."
},
{
"name": "aaa-username",
"desc": ""
},
{
"name": "username",
"desc": "(Optional) Display information about the user with the specified authentication, authorization, and... | view
Output Fields
Table 1326 on page 25577 lists the output fields for the show security ike active-peer command. Output
fields are listed in the approximate order in which they appear.
Table 1326: show security ike active-peer Output Fields
Field Name
Field Description
Level of Output
Remote Address
IP address of the... | Command introduced in Junos OS Release 10.4. Support to display dead peer detection (DPD) statistics
added in Junos OS Release 12.3X48-D10.
Support for the ha-link-encryption option added in Junos OS Release 20.4R1.
Support for the srg-id option added in Junos OS Release 22.4R1.
Support for the node-local option added ... | [] | |
show security ike debug-status | show security ike debug-status | Display debug status for currently enabled Internet Key Exchange (IKE) tracing. | [] | view
Output Fields
Table 1327 on page 25584 lists the output fields for the show security ike debug-status command. Output
fields are listed in the approximate order in which they appear.
Table 1327: show security ike debug-status Output Fields
Field Name
Field Description
Enabled/Disabled
Status of the IKE per-tunnel ... | Command introduced in Junos OS Release 11.4R3. | [] | |
show security ike peers statistics | show security ike peers statistics <gateway-name value | summary> | Display the global or per IKE gateway level statistics. | [
{
"name": "statistics",
"desc": "Display global IKE gateway statistics for the remote peers to show details for all the gateways."
},
{
"name": "gateway-name",
"desc": ""
},
{
"name": "value",
"desc": "(Optional) Enter the IKE gateway name to display the statistics for a specific gat... | View
Output Fields
The Table 1328 on page 25586 lists the output fields for the show security ike peers statistics command.
Table 1328: show security ike peers statistics Output Fields
Field Name
Field Description
Gateway name
IKE gateway name of the remote peer. This field is not seen with the CLI option
summary.
Acti... | Command introduced in Junos OS Release 23.4R1 | [
"IKE Protection from DDoS Attacks"
] | |
show security ike peers | show security ike peers <backoff | blocked | failed | in-progress> <brief | detail> role
<initiator | responder> index <value> remote-ip-address <value> local-ip-address <value> gateway-
name <value>
show security ike peers blocked blocklist-name <blocklist-name> <brief | detail> role <initiator
| responder> index... | Display information about IKE peer such as the backoff peers, blocked peers, failed peers, and the in
progress peers. | [
{
"name": "backoff",
"desc": "Display the IKE backoff peers. Display details of the remote peers (initiators) that are temporarily denied permission to start a new IKE negotiation due to the previous SA_INIT or IKE_AUTH phase failures."
},
{
"name": "blocked",
"desc": "Display the IKE blocked pe... | View
Output Fields
The Table 1329 on page 25589 lists the output fields of the show security ike peers in-progress brief
command. You'll see similar output with backoff, blocked, and failed options. The Table 1330 on page
25589 lists the output fields for the show security ike peers in-progress detail command. You'll s... | Command introduced in Junos OS Release 23.4R1 | [
"IKE Protection from DDoS Attacks"
] | |
show security ike pre-shared-key | show security ike pre-shared key
master-key <master-key>
user-id <user-id>
gateway <gateway_name> | Display the Internet Key Exchange (IKE) preshared key used by the Virtual Private network (VPN)
gateway to authenticate the remote access user. Use either master-key or gateway option to get the
master presharedkey. | [
{
"name": "master-key master-key",
"desc": "(Optional) Primary preshared key."
},
{
"name": "user-id user-id",
"desc": "(Optional) IKE user ID value."
},
{
"name": "gateway gateway_name",
"desc": "(Optional) Label of the VPN gateway set with master preshared key."
}
] | view
Sample Output
show security ike pre-shared-key user-id
user@host> show security ike pre-shared-key user-id a@example.net master-key example
Preshared Key:3b33ec3631a561ec5a710f5d02f208033b108bb4
show security ike pre-shared-key gateway gateway_name user-id user-id
user@host> show security ike pre-shared-key gatew... | Command introduced in Junos OS Release 8.5.
gateway option is introduced in Junos OS Release 21.1R1. | [] | |
show security ike security-associations | show security ike security-associations
<peer-address>
<brief | detail>
<family (inet | inet6)>
<fpc slot-number>
<index SA-index-number>
<kmd-instance (all | kmd-instance-name)>
<node-local>
<pic slot-number>
<sa-type shortcut >
<srg-id id-number>
<ha-link-encryption> | Display information about Internet Key Exchange security associations (IKE SAs). | [
{
"name": "none",
"desc": "Display standard information about existing IKE SAs, including index numbers."
},
{
"name": "peer-address",
"desc": "(Optional) Display details about a particular SA based on the IPv4 or IPv6 address of the"
},
{
"name": "brief",
"desc": "(Optional) Display... | view
Output Fields
Table 1331 on page 25596 lists the output fields for the show security ike security-associations command.
Output fields are listed in the approximate order in which they appear.
Table 1331: show security ike security-associations Output Fields
Field Name
Field Description
IKE Peer or Remote Address
... | Command introduced in Junos OS Release 8.5. Support for the fpc, pic, and kmd-instance options added in
Junos OS Release 9.3. Support for the family option added in Junos OS Release 11.1. Support for Auto
Discovery VPN added in Junos OS Release 12.3X48-D10. Support for IKEv2 reauthentication added in
Junos OS Release 1... | [
"Example: Configuring a Route-Based VPN Tunnel in a User Logical Systems"
] | |
show security ike stats | show security ike stats <brief | detail> | Display information about global IKE (Internet Key Exchange) statistics for the tunnels such as in-
progress, established, and expired negotiations using IKEv2 on your SRX5000 line with SPC3 card. | [
{
"name": "detail",
"desc": "Displays all the global IKE and tunnel count statistics."
}
] | view
Output Fields
Table 1332 on page 25617 lists the output fields of total IKE SA and tunnel count statistics. Table 1333
on page 25618 lists the output fields of IKE_SA_INIT, IKE_AUTH, IKE SA Rekey CREATE_CHILD_SA, IPsec SA Rekey
CREATE_CHILD_SA exchanges statistics. Table 1334 on page 25622 lists total IKE message ... | Command introduced in Junos OS Release 19.4R1.
CLI options brief and detail are introduced in Junos OS Release 20.1R1.
The output field Number of DPD failovers is introduced in Junos OS Release 23.4R1. | [
"Phase 1 of IKE Tunnel Negotiation",
"Phase 2 of IKE Tunnel Negotiation"
] | |
show security ike tunnel-map | show security ike tunnel-map (<brief | summary>) <fpc slot-number> <kmd-instance (all | kmd-
instance-name)> <pic slot-number> | Display the tunnel mapping on different Services Processing Units (SPUs) for site-to-site and manual
VPNs. You can insert an SPC on a device in a chassis cluster without disrupting traffic on the existing
VPN tunnels. After inserting the SPC, you can view the tunnel mapping using this command. This
feature is supported... | [
{
"name": "brief",
"desc": "Display standard information about all existing IKE SAs. This is the default."
},
{
"name": "fpc slot-number",
"desc": "Display information about existing IKE SAs in the specified Flexible PIC Concentrator (FPC) slot."
},
{
"name": "kmd-instance",
"desc": ... | view
Output Fields
Table 1335 on page 25628 lists the output fields for the show security ike tunnel-map command. Output
fields are listed in the approximate order in which they appear.
Table 1335: show security ike tunnel-map Output Fields
Field Name
Field Descripton
Gateway ID
Gateway identifier. This is a nondetermi... | Command introduced in Junos OS Release 12.1X44-D10. | [
"VPN Support for Inserting Services Processing Cards"
] | |
show security integrity | show security integrity (extended-keyring | system-keystore) | Display the location of public/private keys on the disk or the list of keys loaded into the IMA extended
keyring. | [
{
"name": "extended-keyring",
"desc": "Display the contents of the IMA extended keyring."
},
{
"name": "system-keystore",
"desc": "Display the location of public/private keys on disk."
}
] | maintenance | Statement introduced in Junos OS Evolved Release 20.1R1. | [] | |
show security internal-security-association | show security internal-security-association | Provide secure login by enabling the internal security association in a chassis cluster configuration. | [] | view
Output Fields
Table 1336 on page 25632 lists the output fields for the show security internal-security-association
command. Output fields are listed in the approximate order in which they appear.
Table 1336: show security internal-security-association Output Fields
Field Name
Field Description
Internal SA Status
S... | Command introduced in Junos OS Release 12.1X47-D10. | [
"Chassis Cluster User Guide for SRX Series Devices"
] | |
show security ipsec control-plane-security-associations | show security ipsec control-plane-security-associations
<brief | detail>
<sa-name sa-name> | Display information about manual IPsec security associations (SAs) applied to OSPF or OSPFv3
interfaces or virtual links. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "sa-name sa-name",
"desc": "Name of the manual SA."
}
] | view
Output Fields
Table 1337 on page 25634 lists the output fields for the show security ipsec control-plane-security-
associations command. Output fields are listed in the approximate order in which they appear.
Table 1337: show security ipsec control-plane-security-associations Output Fields
Field Name
Field Descrip... | Command introduced in Junos OS Release 12.1X46-D20. | [
"Understanding OSPF and OSPFv3 Authentication on SRX Series Devices"
] | |
show security ipsec inactive-tunnels | show security ipsec inactive-tunnels
brief | detail
family (inet | inet6)
fpc slot-number
index index-number
kmd-instance (all | kmd-instance-name)
node-local
pic slot-number
srg-id id-number
sa-type shortcut
vpn-name vpn-name | Display security information about the inactive tunnel. | [
{
"name": "none",
"desc": "Display information about all inactive tunnels."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "family",
"desc": "(Optional) Display the inactive tunnel by family. This option is used to filter the o... | view
Output Fields
Table 1338 on page 25638 lists the output fields for the show security ipsec inactive-tunnels command.
Output fields are listed in the approximate order in which they appear.
Table 1338: show security ipsec inactive-tunnels Output Fields
Field Name
Field Description
Total inactive tunnels
Total numbe... | Command introduced in Junos OS Release 11.4R3.
Support for the passive-mode-tunneling option on MX-SPC3 is added in Junos OS Release 23.1R1.
Support for the node-local option is added in Junos OS Release 23.2R1. | [
"show security ipsec security-associations"
] | |
show security ipsec next-hop-tunnels | show security ipsec next-hop-tunnels {
family (inet | inet6);
index;
interface-name;
} | Display security information about the secure tunnel interface. | [
{
"name": "family",
"desc": "Display IPSec next-hop-tunnel entries by family."
},
{
"name": "index",
"desc": "Index of security association. Range:"
},
{
"name": "1 through 4294967295",
"desc": ""
},
{
"name": "inet",
"desc": "Displays IPv4 protocol parameters."
},
{... | view
Output Fields
Table 1339 on page 25645 lists the output fields for the show security ipsec next-hop-tunnels command.
Output fields are listed in the approximate order in which they appear.
Table 1339: show security ipsec next-hop-tunnels Output Fields
Field Name
Field Description
Next-hop gateway
IP address of the... | Command introduced in Junos OS Release 8.5.
The family inet6 option is introduced in Junos OS Release 18.1R1. | [] | |
show security ipsec security-associations | show security ipsec security-associations
<brief | detail | extensive>
<family (inet | inet6)>
<fpc slot-number pic slot-number>
<index SA-index-number>
<kmd-instance (all | kmd-instance-name)>
<node-local>
<pic slot-number fpc slot-number>
<sa-type shortcut>
<traffic-selector traffic-selector-name>
<srg-id id-number>... | Display information about the IPsec security associations (SAs).
In Junos OS Releases 20.1R2, 20.2R2, 20.3R2, 20.3R1, and later, when you execute the show security
ipsec security-associations detail command, a new output field IKE SA Index corresponding to every IPsec
SA within a tunnel is displayed under each IPsec SA... | [
{
"name": "none",
"desc": "Display information about all SAs."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "family",
"desc": "(Optional) Display SAs by... | view
Output Fields
Table 1340 on page 25649 lists the output fields for the show security ipsec security-associations
command, Table 1341 on page 25655 lists the output fields for the show security ipsec sa command and
Table 1342 on page 25657. lists the output fields for the show security ipsec sa detail. Output field... | Command introduced in Junos OS Release 8.5. Support for the family option added in Junos OS Release
11.1.
Support for the vpn-name option added in Junos OS Release 11.4R3. Support for the traffic-selector
option and traffic selector field added in Junos OS Release 12.1X46-D10.
Support for Auto Discovery VPN (ADVPN) add... | [
"Example: Configuring a Route-Based VPN Tunnel in a User Logical Systems"
] | |
show security ipsec statistics | show security ipsec statistics
<fpc slot-number>
<index SA-index-number>
<pic slot-number>
<srg-id id-number>
<ha-link-encryption> | Display standard IPsec statistics. | [
{
"name": "none",
"desc": "Display statistics about all IPsec security associations (SAs)."
},
{
"name": "fpc slot-number",
"desc": "Specific to SRX Series Firewalls. Display statistics about existing IPsec SAs in this"
},
{
"name": "index SA-index-number",
"desc": "(Optional) Displa... | view
Output Fields
Table 1343 on page 25691 lists the output fields for the show security ipsec statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1343: show security ipsec statistics Output Fields
Field Name
Field Description
Virtual-system
The root system.
ESP Statistics... | Command introduced in Junos OS Release 8.5. fpc and pic options added in Junos OS Release 9.3.
Support for the ha-link-encryption option added in Junos OS Release 20.4R1.
Support for the srg-id option added in Junos OS Release 22.4R1. | [] | |
show security ipsec traffic-selector | show security ipsec traffic-selector interface-name interface-name
<brief | detail>
<destination-address address>
<fpc slot-number pic slot-number>
<kmd-instance (all | kmd-instance-name)>
<pic slot-number fpc slot-number>
<source-address address> | Display information about the traffic selectors that have been negotiated between the initiator and
responder. | [
{
"name": "interface-name",
"desc": ""
},
{
"name": "interface-name",
"desc": "Name of the secure tunnel logical interface."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. The default is brief."
},
{
"name": "destination-address",
... | view
Output Fields
Table 1344 on page 25700 lists the output fields for the show security ipsec traffic-selector command.
Output fields are listed in the approximate order in which they appear.
Table 1344: show security ipsec traffic-selector Output Fields
Field Name
Field Description
Level of Output
Tunnel-id
Tunnel ... | Command introduced in Junos OS Release 12.3X48-D10. | [
"IPsec Overview"
] | |
show security ipsec tunnel-distribution | show security ipsec tunnel-distribution
<brief | summary | summary-cpuload>
<srg-id number> | Display the number of IPsec VPN tunnels that are anchored in each thread. An IPsec tunnel session is
assigned an anchor thread, based on the load during the tunnel session installation. When a new tunnel
session is created, the least loaded thread is chosen to anchor the new tunnel. When the tunnel is
deleted, the anch... | [
{
"name": "none",
"desc": "Display thread information about all active tunnels."
},
{
"name": "brief",
"desc": "(Optional) Display thread information about all active tunnels. (Default)"
},
{
"name": "fpc",
"desc": "FPC slot number (0..5)."
},
{
"name": "pic",
"desc": "PI... | view
Output Fields
Table 1345 on page 25702 lists the output fields for the show security ipsec tunnel-distribution command.
Output fields are listed in the approximate order in which they appear.
Table 1345: show security ipsec tunnel-distribution Output Fields
Field Name
Field Description
Level of Output
Tunnel-ID
VP... | Command introduced in Junos OS Release 17.4R1.
summary-cpuload option introduced in Junos OS Release 20.4R1.
srg-id option introduced in Junos OS Release 22.4R1. | [] | |
show security ipsec tunnel-events-statistics | show security ipsec tunnel-events-statistics | Show tunnel event statistics. | [] | view
Sample Output
show security ipsec tunnel-events statistics
user@host> show security ipsec tunnel-events statistics
IPSec SA delete payload received from peer : 153
Configuration change triggered clearing of IPSec SA : 1
Peer's remote IKE-ID valida... | Command introduced in Junos OS Release 12.3X48-D10.
Starting with Junos OS Release 15.1X49-D120, you can configure the CLI option reject-duplicate-
connection at the [edit security ike gateway gateway-name dynamic] hierarchy level to retain an existing tunnel
session and reject negotiation requests for a new tunnel wi... | [] | |
show security ipsec vpn vpnname ike idle time | show security ipsec vpn vpn-nameike idle-time | Displays the idle time to delete SAs. | [
{
"name": "seconds",
"desc": "The range of values, in seconds, is 0 through 999,999. Additional Information"
}
] | view
Sample Output
show security ipsec vpn vpn-name ike idle-time
user@host> show security ipsec vpn vpn-name ike idle-time | Command introduced in Junos OS Release 22.3R1. | [] | |
show security keychain | show security keychain
<brief | detail> | Display information about authentication keychains configured for the Border Gateway Protocol (BGP),
the Label Distribution Protocol (LDP) routing protocols, the Bidirectional Forwarding Detection (BFD)
protocol, and the Intermediate System-to-Intermediate System (IS-IS) protocol. | [
{
"name": "none",
"desc": "Display information about authentication keychains."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
}
] | view
Output Fields
Table 1346 on page 25712 describes the output fields for the show security keychain command. Output
fields are listed in the approximate order in which they appear.
Table 1346: show security keychain Output Fields
Field Name
Field Description
Level of Output
keychain
The name of the keychain in oper... | Command introduced in Junos OS Release 11.2. | [] | |
show security log file | show security log file | Enables you to view event-mode log files stored on the device in binary and protobuf format. | [] | view
Output Fields
Table 1347 on page 25715 lists the output fields for the show security log file command. Output fields
are listed in the approximate order in which they appear.
Table 1347: show security log file Output Fields
Field Name
Field Description
Event time
The timestamp when the security event was received.... | Command introduced in Junos OS Release 12.1. | [] | |
show security log profile | show security log profile <config|template> | Use this command to see the log template details. | [] | view
Sample Output
show security log profile traditional-firewall
user@host> show security log profile traditional-firewall
The template: traditional-firewall
==========================
category: session
fields selected:
reason
source-address
source-port
destination-address
destination-port
service-name
nat-source... | Command introduced in Junos OS Release 21.1R1. | [] | |
show security log query | •
show security log query—View the security log from the database with query conditions.
•
show security log stream file—View all the security log messages in the specified log file. Use the /var/
log/ hostlogs directory to search the specified log file, and use the show security log stream file
command to view logs in... | [
{
"name": "count",
"desc": "The log number to output."
},
{
"name": "scr-ip",
"desc": "The source IP address of log messages."
},
{
"name": "dst-ip",
"desc": "The destination IP address of log messages."
},
{
"name": "src-port",
"desc": "The source port of log messages."
... | view
Sample Output
show security log query
rootr@dut> show security log query category flow count 20 src-ip 211.0.0.2 start-time
2013-11-29T00:00:00 end-time 2013-11-29T23:59:00
<14>1 2013-11-29T16:01:26.820+08:00 plat02 RT_FLOW - RT_FLOW_SESSION_CLOSE reason="CLI" source-
address="211.0.0.2" source-port="20263" desti... | Command introduced in Junos OS Release 15.1X49-D70. | [] | ||
show security log report in-detail | show security log report in-detail {all | atp | dns | idp | ipsec-vpn | screen | session |
threat | utm} | This command allows you to generate detail log content. | [
{
"name": "all",
"desc": "Display all audit event logs stored in the device memory."
},
{
"name": "atp",
"desc": "Display all ATP event logs."
},
{
"name": "dns",
"desc": "Display all DNS event logs."
},
{
"name": "idp",
"desc": "Display all IDP event logs."
},
{
... | view
Output Fields
Table 1 lists the output fields for the show security log report in-detail command.
Table 1348: name-of-command Output Fields
Field Name
Field Description
Event time
The timestamp when the security event was received.
Message
The message describing the security event.
Sample Output
show security log... | Command introduced in Junos OS Release 23.1R1 . | [
"On-Box Logging and Reporting"
] | |
show security log report in-interval | show security log report in-interval {atp | dns | idp | ipsec-vpn | screen | session | threat |
utm} | This command allows you to generate the events logged between certain time intervals. | [
{
"name": "atp",
"desc": "Display all ATP event logs."
},
{
"name": "dns",
"desc": "Display all DNS event logs."
},
{
"name": "idp",
"desc": "Display all IDP event logs."
},
{
"name": "ipsec-vpn",
"desc": "Display all IPsec-VPN event logs."
},
{
"name": "screen",
... | view
Sample Output
show security log report in-interval
user@host> show security log report in-interval session all start-time 2023-02-26T23:15:48 stop-
time 2023-02-26T23:15:55
Time-intervals Blocked/Denied events All events
----------------------------------------------------------
2023-02-26T23:15:48 0 ... | Command introduced in Junos OS Release 23.1R1 . | [
"On-Box Logging and Reporting"
] | |
show security log report summary | show security log report summary {all | atp | dns | idp | ipsec-vpn | screen | session | threat
| utm} | This command allows you to generate the summary of the events. In this way, you can fine-tune the
report to your needs, and displays only the data that you want to use. | [
{
"name": "all",
"desc": "Display summary of all audit event logs stored in the device memory."
},
{
"name": "atp",
"desc": "Display summary of all ATP event logs."
},
{
"name": "dns",
"desc": "Display summary of all DNS event logs."
},
{
"name": "idp",
"desc": "Display s... | view
Sample Output
show security log report summary
user@host> show security log report summary all
total-count: 33
user@host> show security log report summary session all
total-count: 4
show security log report summary dns
user@host> show security log report summary dns
total-count: 1
show security log report summary... | Command introduced in Junos OS Release 23.1R1 . | [
"On-Box Logging and Reporting"
] | |
show security log report | in-detail
in-interval
summary
top | Displays the security log report settings.
On-box reporting offers a comprehensive reporting facility where your security management team can
spot a security event when it occurs. Immediately access and review pertinent details about the event,
and quickly decide appropriate remedial action. | [
{
"name": "in-detail",
"desc": "Displays the detail log content"
},
{
"name": "in-interval",
"desc": "Displays the count in intervals"
},
{
"name": "summary",
"desc": "Displays the summary information"
},
{
"name": "top",
"desc": "Displays the top number to be calculated"... | view
Output Fields
Sample Output
show security log report summary session-all tenant TSYS1
user@host> show security log report summary session-all tenant TSYS1
total-count: 4
Show security log report summary session-all root-logical-system
user@host> Show security log report summary session-all root-logical-system
to... | Command introduced in Junos OS Release 19.1R1. | [] | |
show security log severity | show security log severity | Display severity information for the event. | [] | view
Output Fields
Table 1349 on page 25749 lists the output fields for the show security log severity command. Output
fields are listed in the approximate order in which they appear.
Table 1349: show security log severity Output Fields
Field Name
Field Description
alert
Alert severity
crit
Critical severity
debug
Debu... | Command introduced in Junos OS Release 15.1X49-D40. | [] | |
show security log transport | show security log transport
<stream-name | all>
<logical-system | root-logical-system | tenant> | Displays transport-level statistics for configured security log streams. The output includes per-stream
metrics such as protocol type, host IP/port, number of logs delivered, number of logs undelivered
(TCP/SSL only), bytes sent, and bytes undelivered. These counters provide detailed visibility into log
transport perfo... | [
{
"name": "stream-name",
"desc": "Specify the name of a particular log stream to display detailed transport statistics about that specific stream."
},
{
"name": "all",
"desc": "Display transport statistics for all configured log streams on the device."
},
{
"name": "logical-system",
... | show
Output Fields
Table 1350 on page 25752 lists the output fields for the show security log transport all command. Output
fields are listed in the approximate order in which they appear.
Table 1350: show security log transport all Output Fields
Field Name
Field Description
Stream name
The name of the configured tran... | Command introduced in Junos OS Release 25.4R1 | [] | |
show security log | show security log {all| destination-address| destination-port| event-id| failure|interface-name|
newer-than| older-than| process| protocol|report| severity| sort-by| source-address| source-
port| success| transport| user} | Display security event logs. This command continuously displays security events on the screen. To stop
the display, press Ctrl+c. | [
{
"name": "all",
"desc": "Display all audit event logs stored in the device memory."
},
{
"name": "destination-address",
"desc": "Display audit event logs with the specified destination address."
},
{
"name": "destination-port",
"desc": "Display audit event logs with the specified de... | view
Output Fields
Table 1351 on page 25755 lists the output fields for the show security log command. Output fields are
listed in the approximate order in which they appear.
Table 1351: show security log Output Fields
Field Name
Field Description
Event time
The timestamp of the events received.
Security logs were alwa... | Command introduced in Junos OS Release 11.2.
transport option introduced in Junos OS Release 25.4R1. | [] | |
show security macsec connections (MX Series) | show security macsec connections
<interface interface-name> | Display the status of the active MACsec connections on the router. | [
{
"name": "none",
"desc": "Display MACsec connection information for all interfaces on the switch."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display MACsec connection information for the specified interface only."
}
] | view
Output Fields
Table 1352 on page 25759 lists the output fields for the show security macsec connections command.
Output fields are listed in the approximate order in which they appear.
Table 1352: show security macsec connections Output Fields
Field Name
Field Description
Fields for Interface
Interface name
Name ... | Command introduced in Junos OS Release 15.1.
Support for MPC7E-10G introduced in Junos OS Release 16.1R1 for MX240, MX480, and MX960
routers. | [] | |
show security macsec connections (SRX) | show security macsec connections
<interface interface-name> | Display the status of the active MACsec connections on the device. | [
{
"name": "none",
"desc": "Display MACsec connection information for all interfaces on the device."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display MACsec connection information for the specified interface only."
}
] | view
Output Fields
Table 1353 on page 25763 lists the output fields for the show security macsec connections command.
Output fields are listed in the approximate order in which they appear.
Table 1353: show security macsec connections Output Fields
Field Name
Field Description
Fields for Interface
Interface name
Name ... | Command introduced in Junos OS Release 15.1X49-D60. | [] | |
show security macsec connections | show security macsec connections
<interface interface-name> | Display the status of the active MACsec connections on the switch.
This command does not display output when MACsec is enabled using static secure association key
(SAK) security mode. | [
{
"name": "none",
"desc": "Display MACsec connection information for all interfaces on the switch."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display MACsec connection information for the specified interface only."
}
] | view
Output Fields
Table 1354 on page 25766 lists the output fields for the show security macsec connections command.
Output fields are listed in the approximate order in which they appear.
Table 1354: show security macsec connections Output Fields
Field Name
Field Description
Fields for Interface
Interface name
Name o... | Command introduced in Junos OS Release 13.2X50-D15. | [] | |
show security macsec statistics (SRX Series Firewalls) | show security macsec statistics
<brief | detail>
<interface interface-name> | Display Media Access Control Security (MACsec) statistics. | [
{
"name": "none",
"desc": "Display MACsec statistics in brief form for all interfaces on the switch."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to entering the command with no options (the default). The detail o... | view
Output Fields
Table 1355 on page 25770 lists the output fields for the show security macsec statistics command. Output
fields are listed in the approximate order in which they appear.
The field names that appear in this command output only when you enter the detail option are mostly
useful for debugging purposes b... | Command introduced in Junos OS Release 15.1X49-D60. | [
"Understanding Media Access Control Security (MACsec)",
"Configuring Media Access Control Security (MACsec)",
"show interfaces (Gigabit Ethernet)"
] | |
show security macsec statistics | show security macsec statistics
<brief | detail>
<interface interface-name> | Display Media Access Control Security (MACsec) statistics.
This command does not display output when MACsec is enabled using static secure association key
(SAK) security mode. | [
{
"name": "none",
"desc": "Display MACsec statistics in brief form for all interfaces on the switch."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to entering the command with no options (the default). The detail o... | view
Output Fields
Table 1356 on page 25775 lists the output fields for the show security macsec statistics command. Output
fields are listed in the approximate order in which they appear.
The field names that appear in this command output only when you enter the detail option are mostly
useful for debugging purposes b... | Command introduced in Junos OS Release 13.2X50-D15. | [] | |
show security match-policies | show security match-policies
destination-ip <ip-address>
destination-port < port-number>
destination-vrf <destination-vrf>
from-zone <zone-name>
global
logical-system <logical-system-name>
protocol <protocol-name | protocol-number>
result-count <number>
root-logical-system
source-end-user-profile <device-identity-profi... | The show security match-policies command allows you to troubleshoot traffic problems using the match
criteria: source port, destination port, source IP address, destination IP address, and protocol. For
example, if your traffic is not passing because either an appropriate policy is not configured or the match
criteria ... | [
{
"name": "destination-ip destination-ip",
"desc": "Displays the destination IP address of the traffic."
},
{
"name": "destination-vrf destination-vrf",
"desc": "(Optional) Displays the destination VRF information."
},
{
"name": "from-zone zone-name",
"desc": "Displays the name or ID... | view
Output Fields
Table 1357 on page 25783 lists the output fields for the show security match-policies command. Output
fields are listed in the approximate order in which they appear.
Table 1357: show security match-policies Output Fields
Field Name
Field Description
Policy
Name of the applicable policy.
Action or A... | Command introduced in Junos OS Release 10.3.
Command updated in Junos OS Release 10.4.
Command updated in Junos OS Release 12.1.
Command updated to include optional from-zone and to-zone global match options in Junos OS Release
12.1X47-D10.
The tenant option is introduced in Junos OS Release 18.3R1.
The url category op... | [
"Security Policies Overview",
"Understanding Security Policy Rules",
"Understanding Security Policy Elements"
] | |
show security mka sessions (MX Series) | show security mka sessions
<interface interface-name>
<summary | brief | detail> | Display MACsec Key Agreement (MKA) session information for all interfaces. The MKA protocol is
responsible for maintaining MACsec on the link, and decides which router on the point-to-point link
becomes the key server. | [
{
"name": "interface interface-name",
"desc": "Display the MKA session information for the specified interface only."
},
{
"name": "summary | brief | detail",
"desc": "Display the specified level of output."
},
{
"name": "none (same as brief)",
"desc": "Display the MKA session inform... | view
Output Fields
Table 1358 on page 25790 lists the output fields for the show security mka sessions command. Output
fields are listed in the approximate order in which they appear.
Table 1358: show security mka sessions Output Fields
Field Name
Field Description
Interface name
Name of the interface.
Interface state
... | Command introduced in Junos OS Release 15.1. | [] | |
show security mka sessions (SRX Series Device | show security mka sessions
<interface interface-name> | Display MACsec Key Agreement (MKA) session information. | [
{
"name": "interface interface-name",
"desc": "(Optional) Display the MKA information for the specified interface only."
}
] | view
Output Fields
Table 1359 on page 25795 lists the output fields for the show security mka sessions command. Output
fields are listed in the approximate order in which they appear.
Table 1359: show security mka sessions Output Fields
Field Name
Field Description
Interface name
Name of the interface.
Member identifie... | Command introduced in Junos OS Release 15.1X49-D60. | [
"Understanding Media Access Control Security (MACsec)",
"Configuring Media Access Control Security (MACsec)",
"show interfaces (Gigabit Ethernet)"
] | |
show security mka sessions summary | show security mka sessions summary | Display MACsec Key Agreement (MKA) session information to see the number of MKAs that are in
progress, connectivity association key (CAK) type, CAK status, and MKA packet count activity. | [] | view
Output Fields
Table 1360 on page 25798 lists the output fields for the show security mka sessions summary command.
Output fields are listed in the approximate order in which they appear.
Table 1360: show security mka sessions summary Output Fields
Field Name
Field Description
Interface name
Name of the interface.
... | Command introduced in Junos OS Release 19.2. | [] | |
show security mka sessions | show security mka sessions
<interface interface-name> | Display MACsec Key Agreement (MKA) session information for all interfaces. The MKA protocol is
responsible for maintaining MACsec on the link, and decides which router on the point-to-point link
becomes the key server. | [
{
"name": "interface interface-name",
"desc": "Display the MKA session information for the specified interface only."
},
{
"name": "summary | brief | detail",
"desc": "Display the specified level of output."
},
{
"name": "none (same as brief)",
"desc": "Display the MKA session inform... | view
Output Fields
Table 1361 on page 25800 lists the output fields for the show security mka sessions command. Output
fields are listed in the approximate order in which they appear.
Table 1361: show security mka sessions Output Fields
Field Name
Field Description
Interface name
Name of the interface.
Interface state
... | Command introduced in Junos OS Release 13.2X50-D15. | [] | |
show security mka statistics (MX Series) | show security mka statistics
<interface interface-name> | Display MACsec Key Agreement (MKA) protocol statistics.
The output for this command does not include statistics for MACsec data traffic. For MACsec data
traffic statistics, see "show security macsec statistics" on page 25774. | [
{
"name": "interface interface-name",
"desc": "(Optional) Display the MKA information for the specified interface only."
},
{
"name": "none",
"desc": "Display the MKA information for all interfaces."
}
] | view
Output Fields
Table 1362 on page 25804 lists the output fields for the show security mka statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1362: show security mka statistics Output Fields
Field Name
Field Description
Received packets
Number of received MKA control pa... | Command introduced in Junos OS Release 15.1.
Support for MPC7E-10G introduced in Junos OS Release 16.1R1 for MX240, MX480, and MX960
routers. | [] | |
show security mka statistics | show security mka statistics
<interface interface-name> | Display MACsec Key Agreement (MKA) protocol statistics.
The output for this command does not include statistics for MACsec data traffic. For MACsec data
traffic statistics, see "show security macsec statistics" on page 25774. | [
{
"name": "interface interface-name",
"desc": "(Optional) Display the MKA information for the specified interface only."
}
] | view
Output Fields
Table 1363 on page 25808 lists the output fields for the show security mka statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1363: show security mka statistics Output Fields
Field Name
Field Description
Received packets
Number of received MKA control p... | Command introduced in Junos OS Release 13.2X50-D15. | [] | |
show security mka statistics | show security mka statistics
<interface interface-name> | Display MACsec Key Agreement (MKA) protocol statistics.
The output for this command does not include statistics for MACsec data traffic. For MACsec data
traffic statistics, see "show security macsec statistics (SRX Series Devices)" on page 25768. | [
{
"name": "interface interface-name",
"desc": "(Optional) Display the MKA information for the specified interface only."
}
] | view
Output Fields
Table 1364 on page 25811 lists the output fields for the show security mka statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1364: show security mka statistics Output Fields
Field Name
Field Description
Received packets
Number of received MKA control pa... | Command introduced in Junos OS Release 15.1X49-D60. | [
"Understanding Media Access Control Security (MACsec)",
"Configuring Media Access Control Security (MACsec)",
"show interfaces (Gigabit Ethernet)"
] | |
show security monitoring fpc fpc-number | show security monitoring fpc fpc-number
<node ( node-id | all | local | primary)> | Display security monitoring information about the FPC slot. | [
{
"name": "fpc-number",
"desc": "Display security monitoring information for the specified FPC slot. It can be in the range"
},
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display security monitoring information for the"
},
{
"name": "node-id",
"desc": "... | view
Output Fields
Table 1365 on page 25814 lists the output fields for the show security monitoring fpc fpc-number command.
Output fields are listed in the approximate order in which they appear.
Table 1365: show security monitoring fpc fpc-number Output Fields
Field Name
Field Description
FPC
Slot number in which the... | Command introduced in Junos OS Release 9.2. | [] | |
show security monitoring performance session | show security monitoring performance session
<fpc slot-number>
<pic slot-number> | Display the current session (total number of sessions at that time) for the last 60 seconds. | [
{
"name": "fpc slot-number",
"desc": "Display information about the FPC slot. Use this option to filter the output based on"
},
{
"name": "pic slot-number",
"desc": "Display information about existing PIMs or Mini-PIMs in a particular PIC slot. Use"
}
] | View
show security monitoring performance session
command-name
user@host> show security monitoring performance session
fpc 0 pic 0
Last 60 seconds:
0: 8 1: 8 2: 8 3: 8 4: 8 5: 7
6: 7 7: 7 8: 7 9: 7 10: 7 11: 8
12: 8 13... | Command introduced in Junos OS Release 10.2. | [] | |
show security monitoring performance spu | show security monitoring performance spu (extensive | summary)
<fpc fpc>
<pic pic>
<thread thread> | Display the services processing unit (SPU) percent utilization for all FPC slots over the last 60 seconds.
Use this command to track the percent utilization statistics per second for the past 60 seconds for each
FPC slot and PIC.
Starting in Junos OS Release 20.2R1, you can use the following operational commands to mo... | [
{
"name": "fpc fpc",
"desc": "Display information about the FPC slot. Use this option to filter the output based on the"
},
{
"name": "pic pic",
"desc": "Display information about existing PIMs or Mini-PIMs in a particular PIC slot. Use this"
},
{
"name": "thread thread",
"desc": "Di... | View
Sample Output
show security monitoring performance spu
This sample shows 46% utilization of the SPU for second 42 in the past 60 seconds for FPC 0 and PIC 0.
user@host> show security monitoring performance spu
fpc 0 pic 0
Last 60 seconds:
0: 48 1: 48 2: 48 3: 48 4: 48 5: 48
6: 48 7: 48 ... | Command introduced in Junos OS Release 10.2. | [] | |
show security monitoring | show security monitoring | Displays a count of security flow and central point (CP) sessions, CPU utilization (as a percentage of
maximum), and memory in use (also as a percentage of maximum) at the moment the command is run.
This command is supported on SRX1400, SRX1500, SRX5400, SRX5600, and SRX5800 devices and
vSRX Virtual Firewall. | [] | View
show security monitoring
command-name
user@host>show security monitoring
user@host> show security monitoring
-----------------------------------------------------------------------–--
Flow session Flow session CP session CP session
FPC PIC CPU Mem current maximum c... | Command introduced in Junos OS Release 10.2. | [] | |
show security nat destination pool | show security nat destination pool
pool-name
all
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Description of the destination pool.
Pool id
Pool identification number.
Routing instance
Name of the routing instance.
Total address
Number of IP addresses that are in use.
Table 1366: show security nat destination pool Output Fields (Continued)
Field Name
Field Description
Translation hits
Number of translation hits... | [
{
"name": "pool-name",
"desc": "Name of the destination address pool."
},
{
"name": "all",
"desc": "Display information about all the destination NAT address pools."
},
{
"name": "logical-system",
"desc": ""
},
{
"name": "(logical-system-name)",
"desc": "Display informati... | view
Output Fields
Table 1366 on page 25828 lists the output fields for the show security nat destination pool command.
Output fields are listed in the approximate order in which they appear.
Table 1366: show security nat destination pool Output Fields
Field Name
Field Description
Pool name
Name of the destination pool... | Command introduced in Junos OS Release 9.2.
The Description output field added in Junos OS Release 12.1.
Support for IPv6 logical systems added in Junos OS Release 12.1X45-D10.
The tenant option is introduced in Junos OS Release 18.3R1. | [] | |
show security nat destination rule | show security nat destination rule
rule-name
all
logical-system (logical-system-name)
root-logical-system
tenant (tenant-name) | Description of the destination NAT rule.
Rule-Id
Rule identification number.
Rule position
Position of the destination NAT rule.
From routing instance
Name of the routing instance from which the packets flow.
Table 1367: show security nat destination rule Output Fields (Continued)
Field Name
Field Description
From int... | [
{
"name": "rule-name",
"desc": "Display information about the specified destination NAT rule."
},
{
"name": "all",
"desc": "Display information about all the destination NAT rules."
},
{
"name": "logical-system",
"desc": "Display information about the destination NAT rules for a spec... | view
Output Fields
Table 1367 on page 25832 lists the output fields for the show security nat destination rule command.
Output fields are listed in the approximate order in which they appear.
Table 1367: show security nat destination rule Output Fields
Field Name
Field Description
Total destination-nat rules
Number of ... | Command introduced in Junos OS Release 9.2. The Description output field added in Junos OS Release
12.1.
Support for IPv6 logical systems and the Successful sessions, Failed sessions and Number of sessions output
fields added in Junos OS Release 12.1X45-D10.
Output for multiple destination ports and the application opt... | [] | |
show security nat destination rule-application | show security nat destination rule-application
rule-name
all
logical-system logical-system-name
root-logical-system | Display information about the specified destination Network Address Translation (NAT) rule application. | [
{
"name": "rule-name",
"desc": "Display information about the specified destination NAT rule application."
},
{
"name": "all",
"desc": "Display information about all the destination NAT rule applications."
},
{
"name": "logical-system logical-system-name",
"desc": "Display informatio... | view
Output Fields
Table 1368 on page 25837 lists the output fields for the show security nat destination rule-application
command. Output fields are listed in the approximate order in which they appear.
Table 1368: show security nat destination rule-application Output Fields
Field Name
Field Description
Destination NA... | Command introduced in Junos OS Release 12.1X47-D10. | [
"Logical Systems and Tenant Systems User Guide for Security Devices"
] | |
show security nat destination summary | show security nat destination summary
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Display a summary of Network Address Translation (NAT) destination pool information. | [
{
"name": "none",
"desc": "Display summary information about the destination NAT pool."
},
{
"name": "logical-system",
"desc": "Display summary information about the destination NAT for a specified logical system. Specify all to display information for all logical systems."
},
{
"name": ... | view
Output Fields
Table 1369 on page 25840 lists the output fields for the show security nat destination summary
command. Output fields are listed in the approximate order in which they appear.
Table 1369: show security nat destination summary Output Fields
Field Name
Field Description
Total destination nat pool
numbe... | Command introduced in Junos OS Release 9.2.
Support for IPv6 logical systems added in Junos OS Release 12.1X45-D10.
The tenant option is introduced in Junos OS Release 18.3R1. | [] | |
show security nat incoming-table | show security nat incoming-table
<node ( node-id | all | local | primary)> | Display Network Address Translation (NAT) table information.
NOTE: The incoming dip NAT table is replaced with ALG cone NAT binding table and the
show security nat incoming-table command is obsolete from Junos OS Release 11.2 onward.
The show security nat incoming-table command works as is in the previous releases. | [
{
"name": "none",
"desc": "Display all information NAT incoming table."
},
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display incoming table information on a specific"
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1.... | view
Output Fields
Table 1370 on page 25844 lists the output fields for the show security nat incoming-table command.
Output fields are listed in the approximate order in which they appear.
Table 1370: show security nat incoming-table Output Fields
Field Name
Field Description
In use
Number of entries in the NAT table... | Command introduced in Junos OS Release 8.5. The node options added in Junos OS Release 9.0. | [] | |
show security nat interface-nat-ports | show security nat interface-nat-ports
<node (node-id | all | local | primary)>
<logical-system (logical-system-name | all)> | Display port usage for an interface source pool for Network Address Translation (NAT). | [
{
"name": "none",
"desc": "Display all port usage information for an interface source pool."
},
{
"name": "node",
"desc": "For chassis cluster configurations, display interface NAT ports information on a specific node."
},
{
"name": "node-id",
"desc": "Identification number of the no... | view
Output Fields
Table 1371 on page 25846 lists the output fields for the show security nat interface-nat-ports
command. Output fields are listed in the approximate order in which they appear.
Table 1371: show security nat interface-nat-ports Output Fields
Field Name
Field Description
Pool Index
Port pool index.
Tota... | Command modified in Junos OS Release 9.2. The node options added in Junos OS Release 9.0. Logical
system support added in Junos OS Release 12.1X45-D10. | [] | |
show security nat resource-usage source-pool | show security nat resource-usage source-pool
all | source-pool-name
logical-system logical-system-name | root logical system | 15.1X49-D90
Starting in Junos OS Release 15.1X49-D90 and Junos OS Release 17.3R1, the total number of
addresses for pools with IPv6 prefixes is shown as zero (0).
15.1X49-D90
Starting in Junos OS Release 15.1X49-D90 and Junos OS Release 17.3R1, the total number of
available resources for pools with IPv6 prefixes is sho... | [
{
"name": "all",
"desc": "Display resource use information for all source NAT pools."
},
{
"name": "source-pool-name",
"desc": "Display resource use information for the specified source NAT pool."
},
{
"name": "logical-system logical-system-name",
"desc": "Display resource use inform... | view
Output Fields
Table 1372 on page 25851 lists the output fields for the show security nat resource-usage source-pool
command. Output fields are listed in the approximate order in which they appear. You can use the clear
security nat statistics command to reset the peak usage statistics.
Table 1372: show security n... | Command introduced in Junos OS Release 12.1X45-D10.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to
determine if a feature is supported on your platform.
Release | [] | |
show security nat source deterministic | show security nat source deterministic
pool-name
host-ip host ip address
host-address-range
xlated-ip xlated-ip-address
xlated-port xlated-port
node
root-logical-system | logical-system {lsys-name | all } | Verify the mapping relation when Deterministic-Nat is on. | [
{
"name": "host-address-range",
"desc": "Display deterministic host address range without overlap."
},
{
"name": "pool-name",
"desc": "Display Deterministic NAT port block table for the specified source pool name."
},
{
"name": "node",
"desc": "Display source NAT deterministic port b... | view
Output Fields
Table 1373 on page 25855 lists the output fields for the show security nat source deterministic command.
Output fields are listed in the approximate order in which they appear.
Table 1373: show security nat source deterministic Output Fields
Field Name
Field Description
Pool name
Name of pool.
Port-o... | Command introduced in Junos OS Release 12.1X47-D10. | [] | |
show security nat source paired-address | show security nat source paired-address
<internal-ip internal-ip-address>
<logical-system logical-system-name>
<pool-name pool-name>
<root-logical-system>
<xlated-ip x-lated-ip-address> | Display information about the Network Address Translation (NAT) source paired addresses. | [
{
"name": "none",
"desc": "Display all paired IP address information."
},
{
"name": "internal ip internal-ip-address",
"desc": "Display information about the specified internal IP address."
},
{
"name": "logical-system logical-system-name",
"desc": "Display information about the sour... | view
Output Fields
Table 1374 on page 25858 lists the output fields for the show security nat source paired-address command.
Output fields are listed in the approximate order in which they appear.
Table 1374: show security nat source paired-address Output Fields
Field Name
Field Description
Pool name
Name of the source... | Command introduced in Junos OS Release 12.1X45-D10. | [] | |
show security nat source persistent-nat-table | show security nat source persistent-nat-table ( all | interface | internal-ip ip-address
<internal-port port> | pool poolname ) | Display a summary of persistent Network Address Translation (NAT) information. | [
{
"name": "all",
"desc": "Display all persistent NAT bindings."
},
{
"name": "interface",
"desc": "Display persistent NAT bindings for the interface."
},
{
"name": "internal-ip ip-address",
"desc": "Display persistent NAT bindings for the specified internal IP address."
},
{
... | view
Output Fields
Table 1375 on page 25861 lists the output fields for the show security nat source persistent–nat–table
command. Output fields are listed in the approximate order in which they appear.
Table 1375: show security nat source persistent–nat–table Output Fields
Field Name
Field Description
Enode
To support... | Command introduced in Junos OS Release 9.6. Support. | [] | |
show security nat source pool | show security nat source pool
pool-name
all
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Description of the source pool.
Pool id
Pool identification number.
Routing Instance
Name of the routing instance.
Host address base
Base address of the original source IP address range.
Port
Port numbers used for the source pool.
Twin port
Upper and lower limits of the twin port.
port overloading
Number of port overlo... | [
{
"name": "pool-name",
"desc": "Display source NAT information for the specified address pool."
},
{
"name": "all",
"desc": "Display information about all source NAT address pools."
},
{
"name": "logical-system",
"desc": "Display information about the source NAT pools for a specified... | view
Output Fields
Table 1376 on page 25865 lists the output fields for the show security nat source pool command. Output
fields are listed in the approximate order in which they appear.
Table 1376: show security nat source pool Output Fields
Field Name
Field Description
Pool name
Name of the source pool. | Command introduced in Junos OS Release 9.2.
The Description output field added in Junos OS Release 12.1.
The Address assignment output field and IPv6 logical system support added in Junos OS Release 12.1X45-
D10.
The twin-port output field added in Junos OS Release 12.1X47-D10.
The Address-persistent output field added... | [] | |
show security nat source port-block | show security nat source port-block
pool-name
host-ip host ip address
xlated-ip xlated-ip-address
xlated-port xlated-port
root-logical-system | logical-system {lsys-name | all} | Display the port blocks allocated by the host. | [
{
"name": "pool-name",
"desc": "Display the PBA port block table for the specified source pool."
},
{
"name": "host ip address",
"desc": "Display the PBA port block table based on the host IP address."
},
{
"name": "xlated ip address",
"desc": "Display the PBA port block table based ... | view
Output Fields
The following table lists all possible fields for the show security nat source port-block and show services nat
source port-block commands. The fields that appear may vary depending on the platform and software
release.
Table 1377: show security nat source port-block Output Fields
Field Name
Field De... | Command introduced in Junos OS Release 12.1X47-D10. The Last active block recycle timeout output
field added in Junos OS Release 15.1X49-D60. | [] | |
show security nat source rule | show security nat static rule
rule-name
all
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Description of the source NAT rule.
Rule-Id
Rule identification number.
Rule position
Position of the source NAT rule.
From zone
Name of the zone from which the packets flow.
Table 1378: show security nat source rule Output Fields (Continued)
Field Name
Field Description
To zone
Name of the zone to which the packets f... | [
{
"name": "rule-name",
"desc": "Name of the rule."
},
{
"name": "all",
"desc": "Display information about all the source NAT rules."
},
{
"name": "logical-system",
"desc": "Display information about the source NAT rules for a specified logical system. Specify all to display informati... | view
Output Fields
Table 1378 on page 25882 lists the output fields for the show security nat source rule command.
Output fields are listed in the approximate order in which they appear
Table 1378: show security nat source rule Output Fields
Field Name
Field Description
Source NAT rule
Name of the source NAT rule.
Tota... | Command introduced in Junos OS Release 9.2. Support.
The Description output field added in Junos OS Release 12.1.
Support for IPv6 logical systems and the Source port, Successful sessions, Failed sessions, and Number
of sessions output fields added in Junos OS Release 12.1X45-D10.
Output for multiple destination ports ... | [] | |
show security nat source rule-application | show security nat source rule-application
rule-name
all
logical-system logical-system-name
root-logical-system | Display information about the specified source Network Address Translation (NAT) rule application. | [
{
"name": "rule-name",
"desc": "Display information about the specified source NAT rule application."
},
{
"name": "all",
"desc": "Display information about all the source NAT rule applications."
},
{
"name": "logical-system logical-system-name",
"desc": "Display information about th... | view
Output Fields
Table 1379 on page 25888 lists the output fields for the show security nat source rule-application
command. Output fields are listed in the approximate order in which they appear.
Table 1379: show security nat source rule-application Output Fields
Field Name
Field Description
Destination NAT rule
Nam... | Command introduced in Junos OS Release 12.1X47-D10. | [
"Logical Systems and Tenant Systems User Guide for Security Devices"
] | |
show security nat source summary | show security nat source summary
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | 12.3X48-D55
Starting in Junos OS Release 12.3X48-D55, and Junos OS Release 15.1X49-D90, and Junos OS
Release 17.3R1, the total number of addresses that are in use for pools with IPv6 prefixes is shown
as zero (0). | [
{
"name": "none",
"desc": "Display summary source NAT information."
},
{
"name": "logical-system",
"desc": "Display summary information about the source NAT for a specified logical system. Specify all to display information for all logical systems."
},
{
"name": "root-logical-system",
... | view
Output Fields
Table 1380 on page 25892 lists the output fields for the show security nat source summary command.
Output fields are listed in the approximate order in which they appear.
Table 1380: show security nat source summary Output Fields
Field Name
Field Description
Total source nat pool number
Number of so... | Command introduced in Junos OS Release 9.2.
Support for IPv6 logical systems added in Junos OS Release 12.1X45-D10.
The tenant option is introduced in Junos OS Release 18.3R1.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to
determine if a feature is ... | [] | |
show security nat static rule | show security nat static rule
rule-name
all
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Description of the static NAT rule.
Rule-Id
Rule identification number.
Rule position
Position of the rule that indicates the order in which it applies to traffic.
From interface
Name of the interface from which the packets flow.
From routing instance
Name of the routing instance from which the packets flow.
From zone
... | [
{
"name": "rule-name",
"desc": "Name of the rule."
},
{
"name": "all",
"desc": "Display information about all the static NAT rules."
},
{
"name": "logical-system",
"desc": "Display information about the static NAT rules for a specified logical system. Specify all to display informati... | view
Output Fields
Table 1381 on page 25900 lists the output fields for the show security nat static rule command. Output
fields are listed in the approximate order in which they appear.
Table 1381: show security nat static rule Output Fields
Field Name
Field Description
Static NAT rule
Name of the static NAT rule.
Tot... | Command introduced in Junos OS Release 9.3.
The Description output field added in Junos OS Release 12.1.
Support for IPv6 logical systems and the Successful sessions, Failed sessions, Number of sessions, Source
addresses and Source ports output fields added in Junos OS Release 12.1X45-D10.
The Destination NPTv6 addr an... | [] | |
show security np-cache summary | show security np-cache summary | This command is supported on the SRX4600, SRX5400, SRX5600, and SRX5800 devices. This command
shows the IOC NP session cache information. | [] | view
Output Fields
Table 1382 on page 25906 lists the output fields for the show security flow cp-session command. Output
fields are listed in the approximate order in which they appear.
Table 1382: show security flow cp-session Output Fields
Field Name
Field Description
NP-cache/services-offload
Wings
Number of wings... | Command introduced in Junos OS Release 21.2 R1. | [] | |
show security pki ca-certificate (View) | show security pki ca-certificate
<brief | detail>
<ca-profile ca-profile-name> | Display information about the certificate authority (CA) public key infrastructure (PKI) digital certificates
configured on the device.
The FIPS image does not permit the use of MD5 fingerprints. Therefore, MD5 fingerprints are not
included when a certificate is displayed using this command. The SHA-1 fingerprint that ... | [
{
"name": "none",
"desc": "Display basic information about all configured CA certificates."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
}
] | view
Output Fields
Table 1383 on page 25908 lists the output fields for the show security pki ca-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 1383: show security pki ca-certificate Output Fields
Field Name
Field Description
CA profile
Name of the CA profile in the C... | Command modified in Junos OS Release 8.5.
Subject string output field added in Junos OS Release 12.1X44-D10. Policy identifier output field added
in Junos OS Release 12.3X48-D10.
CA profile and (sha256) for Fingerprint output field added in Junos OS Release 21.4R1. | [
"ca-profile (Security PKI)",
"request security pki ca-certificate verify (Security)"
] | |
show security pki ca-certificate | show security pki ca-certificate
<brief | detail>
<ca-profile ca-profile-name> | Display information about certificate authority (CA) digital certificates installed in the router. | [
{
"name": "none",
"desc": "(Same as brief) Display information about all CA digital certificates."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "ca-profile ca-profile-name",
"desc": "(Optional) Display information about only ... | view
Output Fields
Table 1384 on page 25914 lists the output fields for the show security pki ca-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 1384: show security pki ca-certificate Output Fields
Field Name
Field Description
Level of Output
Certificate
identifier
Na... | Command introduced in Junos OS Release 7.5. | [] | |
show security pki certificate-request (View) | show security pki certificate-request
<brief|detail>
<certificate-id certificate-id-name> | Display information about manually generated local digital certificate requests that are stored on the
device. | [
{
"name": "none",
"desc": "Display basic information about all local digital certificate requests."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(Optional) Display information ab... | view
Output Fields
Table 1385 on page 25920 lists the output fields for the show security pki certificate-request command.
Output fields are listed in the approximate order in which they appear.
Table 1385: show security pki certificate-request Output Fields
Field Name
Field Description
Certificate identifier
Name of ... | Command modified in Junos OS Release 8.5. | [] | |
show security pki certificate-request | show security pki certificate-request
<brief | detail>
<certificate-id certificate-id-name> | Display information about manually generated local digital certificate requests that are stored in the
router. | [
{
"name": "none",
"desc": "(same as brief) Display information about all local digital certificate requests."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(Optional) Display info... | view
Output Fields
Table 1386 on page 25923 lists the output fields for the show security pki certificate-request command.
Output fields are listed in the approximate order in which they appear.
Table 1386: show security pki certificate-request Output Fields
Field Name
Field Description
Level of Output
Certificate
iden... | Command introduced in Junos OS Release 7.5. | [] | |
show security pki crl (View) | show security pki crl
< brief | detail>
<ca-profile ca-profile-name > | Display information about the certificate revocation lists (CRLs) configured on the device. | [
{
"name": "none",
"desc": "Display basic information about all CRLs."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
}
] | view
Output Fields
Table 1387 on page 25927 lists the output fields for the show security pki crl command. Output fields are
listed in the approximate order in which they appear.
Table 1387: show security pki crl Output Fields
Field Name
Field Description
CA profile
Name of the configured CA profile.
CRL version
Revis... | Command modified in Junos OS Release 8.5. | [] | |
show security pki crl | show security pki crl
<brief | detail>
<ca-profile ca-profile-name> | Display information about the certificate revocation lists (CRLs) that are stored in the router. | [
{
"name": "none",
"desc": "(same as brief) Display information about all CRLs."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "ca-profile ca-profile-name",
"desc": "(Optional) Display CRL information about only the specified C... | view
Output Fields
Table 1388 on page 25930 shows the output fields for the show security pki crl command. Output fields
are listed in the approximate order in which they appear.
Table 1388: show security pki crl Output Fields
Field Name
Field Description
Level of Output
CA profile
Name of the configured CA profile.
Al... | Command introduced in Junos OS Release 8.1. | [] | |
show security pki local-certificate (View) | show security pki local-certificate
<brief|detail>
<certificate-id certificate-id-name>
<system-generated> | Display information about the local digital certificates, corresponding public keys, and the automatically
generated self-signed certificate configured on the device. | [
{
"name": "none",
"desc": "Display basic information about all configured local digital certificates, corresponding public"
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(Optional... | view
Output Fields
Table 1389 on page 25934 lists the output fields for the show security pki local-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 1389: show security pki local-certificate Output Fields
Field Name
Field Description
Certificate identifier
Name of the d... | Command modified in Junos OS Release 9.1.
Subject string output field added in Junos OS Release 12.1X44-D10.
Cert-Chain, hexadecimal and decimal for Serial Number, (sha256) for Fingerprint output fields are added in Junos
OS Release 21.4R1. | [
"show security ipsec statistics (MX240, MX480, MX960, SRX Series Firewalls and vSRX Virtual"
] | |
show security pki local-certificate | show security pki local-certificate
<brief | detail>
<certificate-id certificate-id-name>
<system-generated> | Display information about the local digital certificates and the corresponding public keys installed in the
router. | [
{
"name": "none",
"desc": "(same as brief) Display information about all local digital certificates and corresponding public keys."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(... | view
Output Fields
Table 1390 on page 25941 lists the output fields for the show security pki local-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 1390: show security pki local-certificate Output Fields
Field Name
Field Description
Level of Output
Certificate
identifi... | Command introduced in Junos OS Release 7.5. | [] | |
show security pki local-certificate | show security pki local-certificate
<brief | detail>
<certificate-id certificate-id-name>
<system-generated> | Display information about the local digital certificates and the corresponding public keys installed in the
switch. | [
{
"name": "none",
"desc": "(Same as brief) Display information about all local digital certificates and corresponding public keys."
},
{
"name": "brief | detail",
"desc": "(Optional) Display information about local digital certificates and corresponding public keys for the specified level of out... | view
Output Fields
Table 1391 on page 25946 lists the output fields for the show security pki local-certificate command.
Output fields are listed in the approximate order in which they appear.
Table 1391: show security pki local-certificate Output Fields
Field Name
Field Description
Level of Output
Certificate
identifi... | Command introduced in Junos OS Release 11.1. | [
"Manually Generating Self-Signed Certificates on Switches (CLI Procedure)"
] | |
show security pki node-local certificate-request | show security pki node-local certificate-request
<brief|detail>
<certificate-id certificate-id-name> | Display information about manually generated local digital certificate requests that are stored on the
local device in your Multinode High Availability setup. | [
{
"name": "none",
"desc": "Display basic information about all local digital certificate requests."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(Optional) Display information ab... | view
Output Fields
Table 1392 on page 25951 lists the output fields for the show security pki node-local certificate-request
command. Output fields are listed in the approximate order in which they appear.
Table 1392: show security pki node-local certificate-request Output Fields
Field Name
Field Description
Certificat... | Command modified in Junos OS Release 22.3R1 | [
"Multinode High Availability",
"request security pki node-local generate-certificate-request"
] | |
show security pki node-local local-certificate | show security pki node-local local-certificate
<brief|detail>
<certificate-id certificate-id-name | idev-id>
<system-generated> | Display information about the local digital certificates, corresponding public keys, and the automatically
generated self-signed certificate configured on the local device in a Multinode High Availability setup. | [
{
"name": "none",
"desc": "Display basic information about all configured local digital certificates, corresponding public"
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "certificate-id certificate-id-name",
"desc": "(Optional... | view
Output Fields
Table 1393 on page 25954 lists the output fields for the show security pki node-local local-certificate
command. Output fields are listed in the approximate order in which they appear.
Table 1393: show security pki node-local local-certificate Output Fields
Field Name
Field Description
Certificate id... | Command modified in Junos OS Release 22.3R1.
Support for idev-id option added in Junos OS Release 24.2R1 | [
"Multinode High Availability",
"show security pki local-certificate (View)",
"request security pki node-local local-certificate load",
"request security pki node-local local-certificate export",
"request security pki node-local local-certificate enroll",
"request security pki node-local local-certificate ... | |
show security pki statistics | show security pki statistics | Display standard PKI statistics. | [] | view
Output Fields
Table 1394 on page 25961 lists the output fields for the show security ipsec statistics command.
Table 1394: show security ipsec statistics Output Fields
Field Name
Field Description
iked_msgs_inv
Invalid messages from iked process.
iked_msgs_rxd
Messages received from iked process.
iked_msgs_txd
Me... | Command introduced in Junos OS Release 21.4R1. | [] | |
show security policies checksum | show security policies checksum
<logical-system (logical-system name | all)>
<root-logical-system>
<tenant tenant-name> | Displays the security policy checksum value.
Verifying the checksum helps in validating the security policy sync status between the Routing Engine
and the Packet Forwarding Engine. The checksum value should be the same for the Routing Engine and
the Packet Forwarding Engine. If the checksum value is not same, then the ... | [
{
"name": "logical-system (logical-system-name | all)",
"desc": "Displays the security policy checksum value for the security policies configured on a logical system or on all logical systems."
},
{
"name": "root-logical-system",
"desc": "Displays the security policy checksum value for the secur... | view
Sample Output
show security policies checksum (RE)
user@host> show security policies checksum
Logical system: root-logical-system
From zone To zone Checksum
trust untrust 0xe0fc5791-d7ec5b89-cbc66724-35d706c
show security policies checksum (PFE)
FLOWD_OCTEON(vty)# ... | Command introduced in Junos OS Release 18.4R1. | [] | |
show security policies file-serialization counters | show security policies file-serialization counters | Displays the file-based configuration and operational status details. | [] | view
Output Fields
Table lists the output fields for the show security policies file-serialization counters command. Output
fields are listed in the approximate order in which they appear.
Table 1395: show security policies file-serialization counters
Field Name
Field Description
Status
Status of file serialization co... | Command introduced in Junos OS Release 24.4R1 | [] | |
show security policies hit-count | show security policies hit-count
<ascending>
<descending>
<dynamic-applications>
<from-zone zone-name>
<greater-than count>
<less-than count>
<logical-system (logical-system-name | all)>
<root-logical-system>
<tenant (tenant-name | all)>
<to-zone zone-name>
<url-categories> | Display the utility rate of security policies by listing the number of times a security policy rule matches
the traffic (number of hits). You can specify the options to list the output in ascending or descending
order. You can specify the range to display security policies with certain number of hits. You can filter
th... | [
{
"name": "ascending",
"desc": "(Optional) Displays the number of hits for security policies in ascending order."
},
{
"name": "descending",
"desc": "(Optional) Displays the number of hits for security policies in descending order."
},
{
"name": "dynamic-applications",
"desc": "(Opti... | view
Output Fields
"No Link Title" on page 25986 lists the output fields for the show security policies hit-count command.
Output fields are listed in the approximate order in which they appear.
show security policies hit-count Output Fields
Field Name
Field Description
index
Displays the line number
from-zone
Name of ... | Command introduced in Junos OS Release 12.1.
The tenant option is introduced in Junos OS Release 18.3R1.
The dynamic-applications and url-categories options are introduced in Junos OS Release 21.2R1. | [
"Security Policies Overview",
"Unified Policies Configuration Overview"
] | |
show security policies information | show security policies information
<logical-system (logical-system-name | all)>
<root-logical-system>
<tenant tenant-name> | Displays detailed information about the security policies configured on the device.
NOTE: Dynamic policy counters are only supported in the root logical system. | [
{
"name": "logical-system",
"desc": "Displays detailed information about the security policies configured on a logical system or on all logical systems."
},
{
"name": "root-logical-system",
"desc": "Displays detailed information about the security policies configured on the root logical system. ... | view
Output Fields
Table 1396 on page 25991 lists the output fields for the show security policies information command.
Output fields are listed in the approximate order in which they appear.
Table 1396: show security policies Output Fields
Field Name
Field Description
Number of global policies
Number of global policie... | Command introduced in Junos OS Release 18.4R1. | [
"Configuring Security Policies"
] | |
show security policies lookup-intact-on-commit | show security policies lookup-intact-on-commit [ eligibility | status ] | Displays the information about the lookup-intact-on-commit configuration status on all forwarding planes
on the device. The output also displays eligibility of the device based on the option. | [
{
"name": "eligibility",
"desc": "Display the eligibility of the device to enable the (lookup-intact-on-commit) configuration. The command checks the memory and platform requirements of the device and displays the eligibility information along with the system memory availability. The device is eligible only... | view
Output Fields
Table lists the output fields for the show security policies lookup-intact-on-commit command. Output fields
are listed in the approximate order in which they appear.
Table 1397: show security policies lookup-intact-on-commit
Field Name
Field Description
FPC name
Displays the forwarding plane name alo... | Command introduced in Junos OS Release 24.4R1 | [] | |
show security policies policy set | show security policies policy-set | Displays a summary of all policy set you have created for inner session tunnel inspection for EVPN-
VXLAN tunnel traffic. | [] | view
Output Fields
show security policies policy-set Output Fields
Field Name
Field Description
From zone
Name of the source zone.
To zone
Name of the destination zone.
Policy-name
Name of the policy-set
State
Status of the policy:
•
enabled: The policy can be used in the policy lookup process, which
determines access ... | Command introduced in Junos OS Release 21.1R1. | [
"Tunnel Inspection for EVPN-VXLAN on SRX Series Devices"
] | |
show security policies unknown-source-identity | show security policies unknown-source-identity | Display a list of any user or role that is referenced in a policy as a source-identity, but is not yet included
in the role provisioning table.
The role provisioning table is created from the local authentication table, UAC authentication tables, and
user-identification authentication tables. The UAC and user-identific... | [] | view
Output Fields
Table 1398 on page 26006 lists the output fields for the show security policies unknown-source-identity
command. Output fields are listed in the approximate order in which they appear.
Table 1398: show security policies unknown-source-identity Output Fields
Field Name
Field Description
From zone
Part... | Command introduced in Junos OS Release 12.1X45-D10. | [
"Security Policies Overview"
] | |
show security policies zone-context | show security policies zone-context
application-firewall
count
detail
from-zone <zone-name>
interface
logical-system <logical-system-name>
policy-name
root-logical-system
service-set
start
tenant <tenant-name>
to-zone <zone-name> | Displays the security policy that applies the security rules to the transit traffic within a context (from-
zone to to-zone). From the perspective of security policies, traffic enters into one security zone and goes
out on another security zone. This combination of a from-zone and a to-zone is defined as a context. Eac... | [
{
"name": "application-firewall",
"desc": "Displays the information of application-firewall."
},
{
"name": "count",
"desc": "Displays the number of policies to show. Range: 1 through 65535"
},
{
"name": "detail",
"desc": "Displays the detailed information."
},
{
"name": "fro... | view
Output Fields
Table 1399 on page 26009 lists the output fields for the show security policies zone-context command.
Output fields are listed in the approximate order in which they appear.
Table 1399: show security zone-context Output Fields
Field Name
Field Description
From zone
Name or ID of the source zone of th... | Command introduced in Junos OS Release 8.5.
The tenant option is introduced in Junos OS Release 18.3R1. | [
"Configuring Security Policies"
] | |
show security policies | show security policies
<all-logical-systems-tenants>
<checksum>
<count>
<detail>
<from-zone zone-name>
<global>
<hit-count>
<information>
<logical-system logical-system-name>
<policy-name policy-name>
<root-logical-system>
<service-set>
<start>
<tenant tenant-name>
<to-zone zone-name>
<unknown-source-identity>
<zone-co... | Description of the applicable policy.
State
Status of the policy:
•
enabled: The policy can be used in the policy lookup process, which
determines access rights for a packet and the action taken in regard to it.
•
disabled: The policy cannot be used in the policy lookup process, and
therefore it is not available for ac... | [
{
"name": "all-logical-systems-tenants",
"desc": "Displays all multitenancy systems."
},
{
"name": "checksum",
"desc": "Displays the policy information checksum."
},
{
"name": "count",
"desc": "Displays the number of policies to show. Range is 1 through 65,535."
},
{
"name": ... | view
Output Fields
Table 1400 on page 26013 lists the output fields for the show security policies command. Output fields
are listed in the approximate order in which they appear.
Table 1400: show security policies Output Fields
Field Name
Field Description
From zone
Name of the source zone.
To zone
Name of the destina... | Command modified in Junos OS Release 9.2.
Support for IPv6 addresses is added in Junos OS Release 10.2.
Support for wildcard addresses is added in Junos OS Release 11.1.
Support for global policy and services offloading is added in Junos OS Release 11.4.
Support for source-identities and the Description output field is... | [
"Security Policies Overview",
"Understanding Security Policy Rules",
"Understanding Security Policy Elements",
"Unified Policies Configuration Overview"
] | |
show security policy-report | show security policy-report
<from-zone zone-name>
<global>
<report-type report-type>
<to-zone zone-name> | Displays detailed security policy reports.
Optimizing security policies ensure that the policies are efficient. Over time, policies become
disorganised and hence ineffective. You can use the show security policy-report command to notify end
users when you create new policies or change existing policies which adversely ... | [
{
"name": "from-zone",
"desc": "Displays the policy report matching the given source zone. Default: any"
},
{
"name": "global",
"desc": "Displays the security policy report of the global policies."
},
{
"name": "report-type",
"desc": "Displays the type of the policy report. You can ... | view
Sample Output
show security policy-report report-type consolidation
user@host> show security policy-report report-type consolidation
Logical system: root-logical-system
Problem: Policy p2 is consolidated with policy p1
Recommendation: Please check if policy p2 and p1
Index: 129
Policy: p2
Source... | Command introduced in Junos OS Release 20.1R1. | [] | |
show security re-distribution ipsec-vpn | show security re-distribution ipsec-vpn <gateway-name gateway-name> | After executing request security re-distribution ipsec-vpn gateway-name gateway-name command, it may take
some time to establish a new tunnel. This command displays the commands for which the tunnels are in
the pending or awaiting state to get established. | [
{
"name": "none",
"desc": "Display information for all the gateways."
},
{
"name": "gateway-name",
"desc": "(Optional) Display information for the specified gateway."
}
] | view
Output Fields
Table 1401 on page 26045 lists the output fields for the show security re-distribution ipsec-vpn command.
Output fields are listed in the approximate order in which they appear.
Table 1401: show security re-distribution ipsec-vpn Output Fields
Field Name
Field Description
Level of Output
Gateway-name... | Command introduced in Junos OS Release 20.4R1. | [] | |
show security resource-manager group active | show security resource-manager group active
<group-number >
<node ( node-id | all | local | primary)> | This command displays security information about active groups created through the resource manager. | [
{
"name": "none",
"desc": "Display resource manager group service information for all active groups."
},
{
"name": "group-number",
"desc": "(Optional) Display resource manager group service information for a specific group"
},
{
"name": "node",
"desc": "(Optional) For chassis cluster... | view
Output Fields
Table 1402 on page 26048 lists the output fields for the show security resource-manager group command.
Output fields are listed in the approximate order in which they appear.
Table 1402: show security resource-manager group Output Fields
Field Name
Field Description
Total groups
Total number of group... | Command introduced in Junos OS Release 8.5.
The node options added in Junos OS Release 9.0. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security resource-manager resource active | show security resource-manager resource active
<resource-id >
<node ( node-id | all | local | primary)> | This command displays security information about active resources created through the resource
manager. | [
{
"name": "none",
"desc": "Display information for all active resources."
},
{
"name": "resource-id",
"desc": "(Optional) Display information for a resource with a specific identification number."
},
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display ac... | view
Output Fields
Table 1403 on page 26052 lists the output fields for the show security resource-manager resource command.
Output fields are listed in the approximate order in which they appear.
Table 1403: show security resource-manager resource Output Fields
Field Name
Field Description
Total resources
Total number... | Command introduced in Junos OS Release 8.5.
The node options added in Junos OS Release 9.0. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security resource-manager settings | show security resource-manager settings
<node ( node-id | all | local | primary)> | Display resource manager settings. | [
{
"name": "node",
"desc": "(Optional) For chassis cluster configurations, display resource manager settings on a specific node."
},
{
"name": "node-id",
"desc": "Identification number of the node. It can be 0 or 1."
},
{
"name": "all",
"desc": "Display information about all nodes."
... | view
Output Fields
Table 1404 on page 26056 lists the output fields for the show security resource-manager settings command.
Output fields are listed in the approximate order in which they appear.
Table 1404: show security resource-manager settings Output Fields
Field Name
Field Description
Client Heartbeat
Time after... | Command introduced in Junos OS Release 8.5; node options added in Junos OS Release 9.0. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security resource-manager summary | show security resource-manager summary | This command displays summary information about active resources, clients, groups, and sessions
created through the resource manager. | [] | view
Output Fields
Table 1405 on page 26058 lists the output fields for the show security resource-manager summary command.
Output fields are listed in the approximate order in which they appear.
Table 1405: show security resource-manager summary Output Fields
Field Name
Field Description
Active resource-manager client... | Command introduced in Junos OS Release 11.4. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security screen ids-option | show security screen ids-option
screen-name
logical-system
root-logical-system
tenant | Display the configuration information about the specified security screen. You can configure a ids-option
to enable screen protection on the SRX Series Firewalls. | [
{
"name": "screen-name",
"desc": "Name of the screen."
},
{
"name": "logical-system",
"desc": "Name of the logical system."
},
{
"name": "root-logical-system",
"desc": "Displays root logical system as default."
},
{
"name": "tenant",
"desc": "Name of the tenant system."
... | view
Output Fields
Table 1406 on page 26060 lists the output fields for the show security screen ids-option command. Output
fields are listed in the approximate order in which they appear.
Table 1406: show security screen ids-option Output Fields
Field Name
Field Description
TCP address sweep threshold
Number of micros... | Command introduced in Junos OS Release 8.5. Support for UDP port scan added in Junos OS Release
12.1X47-D10.
Support for node option added in Junos OS Release 9.0.
Support for IPv6 extension header screens added in Junos OS Release 12.1X46-D10.
The tenant option is introduced in Junos OS Release 18.3R1.
The IP block fr... | [
"Example: Configuring Multiple Screening Options"
] | |
show security screen statistics | show security screen statistics <zone zone-name | interface interface-name>
logical-system <logical-system-name | all>
root-logical-system
tenant <tenant-name > | Display intrusion detection service (IDS) security screen statistics. | [
{
"name": "zone zone-name",
"desc": "Display screen statistics for this security zone."
},
{
"name": "interface interface-name",
"desc": "Display screen statistics for this interface."
},
{
"name": "logical-system-name",
"desc": "Display screen statistics for the named logical system... | view
Output Fields
Table 1407 on page 26069 lists the output fields for the show security screen statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1407: show security screen statistics Output Fields
Field Name
Field Description
ICMP flood
Internet Control Message Protocol... | Command introduced in Junos OS Release 8.5.
The node option added in Junos OS Release 9.0.
The logical-system all option added in Junos OS Release 11.2R6.
Support for IPv6 extension header screens added in Junos OS Release 12.1X46-D10.
The tenant option is introduced in Junos OS Release 18.3R1. | [
"Example: Configuring Multiple Screening Options"
] | |
show security screen status | show security screen status | Show screen status data. | [] | view
Sample Output
show security screen status
user@host> show security screen status
Screen status:
Screen trap interval : 2 second(s) | Command introduced in Junos OS Release 12.3X48-D20. | [] | |
show security screen white-list | show security screen white-list
<wlist-name>
logical-system
root-logical-system
tenant | Display a set of IP addresses for allowlist. Allowlists allows users to download files that are known to be
safe. Allowlists can be added to in order to decrease false positives. | [
{
"name": "wlist-name",
"desc": "The name of the allowlist."
},
{
"name": "logical-system",
"desc": "Name of the logical system."
},
{
"name": "root-logical-system",
"desc": "(Default) Displays root logical system as default."
},
{
"name": "tenant",
"desc": "The name of t... | view
Output Fields
Table 1408 on page 26086 lists the output fields for the show security screen ids-option command. Output
fields are listed in the approximate order in which they appear.
Table 1408: show security screen ids-option Output Fields
Field Name
Field Description
Logical system
Name of the logical system.
... | Statement introduced in Junos OS Release 12.1.
Statement for UDP flood screen allowlist introduced in Junos OS Release 17.4.
The tenant option is introduced in Junos OS Release 18.3R1. | [
"Example: Configuring Multiple Screening Options"
] | |
show security shadow-policies | show security shadow-policies
<from-zone zone-name>
<global>
<logical-system logical-system-name>
<policy policy-name>
<reverse>
<root-logical-system>
<tenant tenant-name>
<to-zone zone-name> | Displays the shadowing and shadowed policies in a policy list. The output displays the list of all policies
that shadows other policies. The concept of policy shadowing refers to the situation where a policy
higher in the policy list always takes effect before a subsequent policy. Because the policy lookup always
uses ... | [
{
"name": "from-zone zone-name",
"desc": "Displays the name or ID of the source zone of the traffic."
},
{
"name": "global",
"desc": "Displays the information about global policies."
},
{
"name": "logical-system",
"desc": "Displays the name of the logical system."
},
{
"name"... | view
Output Fields
Table 1409 on page 26089 lists the output fields for the show security shadow-policies logical-system
command. Output fields are listed in the approximate order in which they appear.
Table 1409: show security shadow-policies logical-system Output Fields
Field Name
Field Description
Policies
The poli... | Command introduced in Junos OS Release 12.1X44-D10.
The tenant option is added in Junos OS Release 18.3R1. | [] | |
show security softwires map-e confidentiality status | show security softwires map-e confidentiality status | Displays the MAP-E confidentiality status is enabled or disabled. | [] | admin
Output Fields
Table 1410 on page 26091 lists the output fields for the show security softwires map-e confidentiality status
command. Output fields are listed in the approximate order in which they appear.
Table 1410: show security softwires map-e confidentiality status
Field Name
Field Description
Domain
Displays... | Command introduced in Junos OS Release 20.4R1. | [] | |
show security softwires map-e domain | show security softwires map-e domain | Displays the details of the MAP-E BMR and FMR rules that provides mapping between the IPv4
network and IPv6 network. | [] | admin
Output Fields
Sample Output
show security softwires map-e domain (with confidentiality enabled)
user@host> show security softwires map-e domain domain_1
Role : CE
Domain Name : domain_1
BR Address : confidential
End User Ipv6 prefix: 2001:db6:12:3400::/56
BMR Mapping Rule :
Rule... | Statement introduced in Junos OS Release 20.4R1. | [] | |
show security softwires | show security softwires <softwire-name softwire-name>
<logical-system (all | logical-system-name)> | Display a summary of information of all the softwire concentrators and details on concentrators with
specified name. | [
{
"name": "softwire-name softwire-name",
"desc": "Display the details of the specified softwire concentrator."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "Display softwire information for all logical systems or for a specified logical system. This option is only available... | view
Sample Output
command-name
user@host> show security softwires
Softwire Name SC Address Status Number of SI connected
SC-CSSI-1 3001::1 Connected 2
SC-CSSI-str00 3100::1 Active 0
SC-CSSI-str01 3101::1 ... | Command introduced in Junos OS Release 10.4. The logical-system option introduced in Junos OS
Release 12.1. | [
"Understanding Traffic Processing on Security Devices"
] | |
show security ssh key-pair-identity | show security ssh key-pair-identity
( brief <identity-name> | public identity-name ) | Display the SSH key pair identity information. | [
{
"name": "brief identity-name",
"desc": "Display the brief information for a specified identity. The identity-name variable is"
},
{
"name": "public identity-name",
"desc": "Display the public key for a specified identity."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
show security ssh key-pair-identity brief
user@host> show security ssh key-pair-identity brief
SSH Key Pair Identity Information:
Name Create Time Encrypted
sample Dec 28... | Command introduced in Junos OS Release 15.1X49-D70. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.