command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show services icap-redirect statistic | show services icap-redirect statistic
<all-logical-systems-tenants>
<root-logical-system>
<logical-system (logical-system-name | all)>
<tenant (tenant-name | all)> | Displays the ICAP services redirects statistic. ICAP services redirect redirects the HTTP or HTTPS traffic
to any third-party server. The security device acts as an SSL proxy server and decrypts the pass-through
traffic with the proper SSL profile under a security policy. | [
{
"name": "all-logical-systems-tenants",
"desc": "(Optional) Displays the ICAP services redirects statistic for the root logical system, all logical systems, and all tenant systems."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the ICAP services redirects stati... | view
Output Fields
Table 1488 on page 26513 lists the output fields for the show services icap-redirect statistic command.
Output fields are listed in an approximate order in which they appear.
Table 1488: show services icap-redirect statistic
Field Name
Field Description
Message Redirected
Number of messages redirect... | Command introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 20.1R1. | [
"ICAP Service Redirect"
] | |
show services icap-redirect status | show services icap-redirect status
<all-logical-systems-tenants>
<root-logical-system>
<logical-system (logical-system-name | all)>
<tenant (tenant-name | all)> | Displays the status of ICAP services redirects. ICAP services redirect redirects the HTTP or HTTPS
traffic to any third-party server. The security device acts as an SSL proxy server and decrypts the pass-
through traffic with the proper SSL profile under a security policy. | [
{
"name": "all-logical-systems-tenants",
"desc": "(Optional) Displays the status of ICAP services redirects for the root logical system, all logical systems, and all tenant systems."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Displays the status of ICAP services redir... | view
Output Fields
Table 1489 on page 26517 lists the output fields for the show services icap-redirect status command.
Output fields are listed in an approximate order in which they appear.
Table 1489: show services icap-redirect status
Field Name
Field Description
ICAP Status
Status of the ICAP services redirect.
Pro... | Command introduced in Junos OS Release 18.3R1.
tenant option introduced in Junos OS Release 20.1R1. | [
"ICAP Service Redirect"
] | |
show services ids | show services ids (destination-table | pair-table | source-table)
<brief | extensive | terse>
<destination-prefix destination-prefix-name>
<interface interface-name>
<limit number>
<order (anomalies | bytes | flows | packets)>
<service-set service-set-name>
<source-prefix source-prefix-name>
<threshold number> | Display information about intrusion detection service (IDS) events. All events gathered by IDS are
reported as anomalies. For example, events such as create forward or watch flow, FTP passive, and FTP
active are genuinely allowed by the stateful firewall but are logged as anomalies to track the rates and
number for the... | [
{
"name": "destination-table",
"desc": "Display information for an address under possible attack."
},
{
"name": "pair-table",
"desc": "Display information for a particular suspected attack source and destination address pair."
},
{
"name": "source-table",
"desc": "Display information... | view
Output Fields
Table 1490 on page 26521 lists the output fields for the show services ids command. Output fields are
listed in the approximate order in which they appear.
Table 1490: show services ids Output Fields
Field Name
Field Description
Output Level
Interface
Name of an adaptive services interface.
All level... | Command introduced before Junos OS Release 7.4. | [] | |
show services inband-flow-telemetry | show services inband-flow-telemetry (global | profile | stats) | Display Inband Flow Analyzer (IFA) 2.0 statistics. | [
{
"name": "global",
"desc": "Display information about IFA global parameters configured in the IFA node. The IFA global parameters include the global device ID, mode, metadata stack length, and hop limit."
},
{
"name": "profile",
"desc": "Display information about the IFA profile configured in t... | view
Output Fields
Table 1491 on page 26532 lists the output fields for the show services inband-flow-telemetry command.
Table 1491: show services inband-flow-telemetry Output Fields
Field Name
Field Description
Level of Output
Global Device
ID
Global device identifier, which is a unique identifier
configured in the I... | Command introduced in Junos OS Release 21.4R1. | [
"Inband Flow Analyzer (IFA) 2.0 Probe for Real-Time Performance Monitoring"
] | |
show services inline ip-reassembly statistics | show services inline ip-reassembly statistics
<fpc fpc-slot>
<pfe pfe-slot> | Display the inline IP reassembly statistics for the Packet Forwarding Engines on one or more MPCs or
Next Gen Services MX-SPC3 services card. Inline IP reassembly statistics are collected at the Packet
Forwarding Engine level.
NOTE: For more information on MPCs that support inline IP reassembly, refer to
Protocols and ... | [
{
"name": "none",
"desc": "Displays standard inline IP reassembly statistics for all MPCs or MX-SPC3 services card."
},
{
"name": "fpc fpc",
"desc": "(Optional) Displays inline IP reassembly statistics for the specified MPC or MX-SPC3 services card. NOTE: Starting with Junos OS Release 14.2, the... | view
Output Fields
Table 1492 on page 26535 lists the output fields for the show services inline ip-reassembly statistics
command. Output fields are listed in the approximate order in which they appear.
Table 1492: show services inline ip-reassembly statistics Output Fields
Field Name
Field Description
FPC
MPC or MX-SP... | Statement introduced in Junos OS Release 12.2X49.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480
and MX960 with the MX-SPC3 services card. | [] | |
show services inline nat pool | show services inline nat pool
<pool pool--name> | Display information about inline Network Address Translation (NAT) pool. | [
{
"name": "pool-name",
"desc": "Display information about the specified services-inline interface NAT pool."
}
] | view
Output Fields
Table 1493 on page 26544 lists the output fields for the show services inline nat pool command. Output
fields are listed in the order in which they appear.
Table 1493: show services inline nat pool Output Fields
Field Name
Field Description
Interface
Name of an si interace hosted on a Trio-based line... | Command introduced in Junos OS Release 11.4. | [] | |
show services inline nat statistics | show services inline nat statistics
<interface interface-name> | Display information about inline Network Address Translation (NAT) address translations. | [
{
"name": "interface-name",
"desc": "(Optional) Display information about the specified NAT services-inline interface only. When a specific interface is not specified, statistics for all services-inline interfaces are shown."
}
] | view
Output Fields
Table 1494 on page 26546 lists the output fields for the show services inline nat statistics command.
Output fields are listed in the order in which they appear.
Table 1494: show services inline nat statistics Output Fields
Field Name
Field Description
Level of Output
Service PIC
Name of an si interf... | Command introduced in Junos OS Release 11.4. | [] | |
show services inline softwire statistics | show services inline softwire statistics
<interface interface-name>
<mape name>
<mapt name>
<v6rd> | Display information about inline softwire activity. | [
{
"name": "interface interface-name",
"desc": "(Optional) Display information about the specified services-inline interface only. When a specific interface is not specified, statistics for all services-inline interfaces are shown."
},
{
"name": "mape name",
"desc": "(Optional) Display map-e info... | view
Output Fields
Table 1495 on page 26550 lists the output fields for the show services inline softwire statistics command.
Output fields are listed in the order in which they appear.
Table 1495: show services inline softwire statistics Output Fields
Field Name
Field Description
Service PIC Name
Name of the service P... | Command introduced in Junos OS Release 13.3R3.
map-e option introduced in Junos OS Release 18.2R1 for MX Series Routers with MPC and MIC
interfaces.
map-e option introduced in Junos OS Release 20.2R1 for Next Gen Services on MX240, MX480 and
MX960 routers. | [] | |
show services inline-monitoring feature-profile-mapping fpc-slot | show services inline-monitoring feature-profile-mapping fpc-slot slot-number | (EX4100 and EX4100-F switches only) Show what features you configured for flow-based telemetry and
how they are ordered in the flow. | [
{
"name": "fpc-slot slot-number",
"desc": "Specify the slot number to view the feature mapping for that Flexible PIC Concentrator (FPC). You must have already configured a feature profile for inline monitoring for this command to contain any information."
}
] | view
Output Fields
Table 1496 on page 26557 lists the output fields for the show services inline-monitoring feature-profile-
mapping command.
Table 1496: show services inline-monitoring feature-profile-mapping Output Fields
Field Name
Field Description
FPC Slot
Slot configured for flow-based telemetry.
Flow counter Ins... | Command introduced in Junos OS Release 22.2R1. | [
"Flow-Based Telemetry"
] | |
show services inline-monitoring statistics fpc-slot | show services inline-monitoring statistics fpc-slot fpc-slot | Display inline-monitoring services statistical information, including for features that use inline-
monitoring services, such as flow-based telemetry. | [
{
"name": "fpc-slot",
"desc": "Display inline-monitoring statistical information for the specified Flexible PIC Concentrator (FPC) number. Range: 0 through 11"
}
] | view
Output Fields
Table 1497 on page 26560 lists the output fields for the show services inline-monitoring statistics fpc-slot
command. Output fields are listed in the approximate order in which they appear.
Table 1497: show services inline-monitoring statistics fpc-slot Output Fields
Field Name
Field Description
FPC... | Command introduced in Junos OS Release 19.4R1.
Command introduced in Junos OS Evolved Release 22.2R1. | [
"Understanding Inline Monitoring Services",
"Flow-Based Telemetry"
] | |
show services ip-monitoring status | show services ip-monitoring status | Display a brief summary of IP monitoring status along with the current state for a given policy. | [] | view
Output Fields
Table 1498 on page 26562 lists the output fields for the show services ip-monitoring status command.
Output fields are listed in the approximate order in which they appear.
Table 1498: show services ip-monitoring status Output Fields
Field Name
Field Description
Policy
Name of the policy configured.
... | Command modified in Junos OS Release 11.4 R2. Next-hop functionality added in Junos OS Release
12.1X46-D15. | [] | |
show services ipsec-vpn certificates | show services ipsec-vpn certificates
<brief | detail>
<service-set service-set> | (Adaptive services interfaces only) Display local and remote certificates installed in the IPsec
configuration memory cache that are used for the IKE negotiation. | [
{
"name": "none",
"desc": "(same as brief) Display information about local and remote certificates associated with all service sets."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "service-set service-set",
"desc": "(Optional)... | view
Output Fields
Table 1499 on page 26569 lists the output fields for the show services ipsec-vpn certificates command.
Output fields are listed in the approximate order in which they appear.
Table 1499: show services ipsec-vpn certificates Output Fields
Field Name
Field Description
Level of Output
Service set
Name ... | Command introduced in Junos OS Release 7.5. | [] | |
show services ipsec-vpn ike security-associations | show services ipsec-vpn ike security-associations
<brief | detail>
<peer-address> | (Adaptive services interface only) Display information for Internet Key Exchange (IKE) security
associations. If no security association is specified, the information for all security associations is
displayed. | [
{
"name": "none",
"desc": "(same as brief) Display standard information for all IPsec security associations."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "peer-address",
"desc": "(Optional) Display information about a partic... | view
Output Fields
Table 1500 on page 26573 lists the output fields for the show services ipsec-vpn ike security-associations
command. Output fields are listed in the approximate order in which they appear.
Table 1500: show services ipsec-vpn ike security-associations Output Fields
Field Name
Field Description
Level of... | Command introduced before Junos OS Release 7.4.
Statistics for Internet Key Exchange (IKE) security associations for each services PIC introduced in Junos
OS Release 12.1. | [] | |
show services ipsec-vpn ipsec security-associations | show services ipsec-vpn ipsec security-associations
<brief | detail | extensive>
<service-set service-set-name> | (Adaptive services interface only) Display IPsec security associations for the specified service set. If no
service set is specified, the security associations for all service sets are displayed. | [
{
"name": "none",
"desc": "Display standard information about IPsec security associations for all service sets."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "service-set service-set-name",
"desc": "(Optional) Dis... | view
Output Fields
Table 1501 on page 26581 lists the output fields for the show services ipsec-vpn ipsec security-associations
command. Output fields are listed in the approximate order in which they appear.
Table 1501: show services ipsec-vpn ipsec security-associations Output Fields
Field Name
Field Description
Lev... | Command introduced before Junos OS Release 7.4. | [] | |
show services ipsec-vpn ipsec statistics | show services ipsec-vpn ipsec statistics
<brief | detail>
<remote-gw remote-peer-address>
<service-set service-set-name> | (Adaptive services interface only) Display IPsec statistics for the specified service set. If no service set is
specified, the statistics for all service sets are displayed. | [
{
"name": "none",
"desc": "Display standard IPsec statistics for all service sets."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "remote-gw remote-peer-address",
"desc": "(Optional) Display IPsec statistics for an individual ... | view
Output Fields
Table 1502 on page 26590 lists the output fields for the show services ipsec-vpn ipsec statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1502: show services ipsec-vpn ipsec statistics Output Fields
Field Name
Field Description
Level of Output
PIC
The ph... | Command introduced before Junos OS Release 7.4.
New fields added in Junos OS Release 10.0. | [] | |
show services l2tp client | show services l2tp client
<client-name> | Display information about all L2TP clients or a specific L2TP client. | [
{
"name": "client-name",
"desc": "(Optional) Name of a client."
}
] | view
Output Fields
Table 1503 on page 26596 lists the output fields for the show services l2tp client command. Output fields
are listed in the approximate order in which they appear.
Table 1503: show services l2tp client Output Fields
Field Name
Field Description
Client
Client Name
Name of the client.
Tunnels
Number of... | Command introduced in Junos OS Release 16.1. | [
"L2TP LAC Tunneling for Subscribers"
] | |
show services l2tp destination lockout | show services l2tp destination lockout | Display a list of destinations that are currently locked out and the time remaining for each to remain in
the lockout state. | [] | view
Output Fields
Table 1504 on page 26599 lists the output fields for the show services l2tp destination lockout command.
Output fields are listed in the approximate order in which they appear.
Table 1504: show services l2tp destination lockout Output Fields
Field Name
Field Description
Destination
Name of the desti... | Command introduced in Junos OS Release 13.2. | [] | |
show services l2tp destination | show services l2tp destination
<brief | detail | extensive>
<local-gateway gateway-address>
<peer-gateway gateway-address>
<statistics> | Display information about L2TP tunnel destinations. | [
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of information."
},
{
"name": "local-gateway gateway-address",
"desc": "(Optional) Display L2TP session information for only the specified local gateway address."
},
{
"name": "peer-gateway gateway-ad... | view
Output Fields
Table 1505 on page 26601 lists the output fields for the show services l2tp destination command. Output
fields are listed in the approximate order in which they appear.
Table 1505: show services l2tp destination Output Fields
Field Name
Field Description
Level of Output
Local Name
Name of this destin... | Command introduced in Junos OS Release 10.4. | [] | |
show services l2tp multilink | show services l2tp multilink
<brief | detail | extensive | statistics>
<bundle-id number> | (M10i and M7i routers only) Display L2TP output organized by multilink bundle. | [
{
"name": "none",
"desc": "Same as brief."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | statistics",
"desc": "(Optional) Display the specified level of output. Use the statistics option to display packets and bytes that have been encapsulated in the Multilink... | view
Output Fields
Table 1506 on page 26607 lists the output fields for the show services l2tp multilink command. Output
fields are listed in the approximate order in which they appear.
Table 1506: show services l2tp multilink Output Fields
Field Name
Field Description
Level of Output
Bundle ID
Bundle identifier.
All l... | Command introduced before Junos OS Release 7.4. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services l2tp radius | show services l2tp radius
<accounting (servers | statistics)>
<authentication (servers | statistics)>
<servers>
<statistics> | (M7i, M10i, and M120 routers only) Display RADIUS servers and statistics information for the RADIUS
servers configured on the router. | [
{
"name": "accounting (servers |",
"desc": ""
},
{
"name": "statistics)",
"desc": "(Optional) Display RADIUS servers or statistical accounting information only."
},
{
"name": "authentication (servers |",
"desc": ""
},
{
"name": "statistics)",
"desc": "(Optional) Display R... | view
Output Fields
Table 1507 on page 26614 lists the output fields for the show services l2tp radius command. Output fields
are listed in the approximate order in which they appear.
Table 1507: show services l2tp radius Output Fields
Field Name
Field Description
IP Address
IP address of the server.
State
(servers keyw... | Command introduced in Junos OS Release 9.0. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services l2tp session | show services l2tp session
<brief | detail | extensive>
<interface interface-name>
<local-gateway gateway-address>
<local-gateway-name gateway-name>
<local-session-id session-id>
<local-tunnel-id tunnel-id>
<peer-gateway gateway-address>
<peer-gateway-name gateway-name>
<statistics>
<tunnel-group group-name>
<user us... | (M10i and M7i routers only) Display information about active L2TP sessions for LNS.
(MX Series routers only) Display information about active L2TP sessions for LAC and LNS. | [
{
"name": "none",
"desc": "Display standard information about all active L2TP sessions."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display L2TP session informatio... | view
Output Fields
Table 1508 on page 26620 lists the output fields for the show services l2tp session command. Output
fields are listed in the approximate order in which they appear.
Table 1508: show services l2tp session Output Fields
Field Name
Field Description
Level of Output
Interface
(LNS only) Name of an adapti... | Command introduced before Junos OS Release 7.4.
Support for LAC on MX Series routers introduced in Junos OS Release 10.4.
Support for LNS on MX Series routers introduced in Junos OS Release 11.4. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services l2tp session-limit-group | show services l2tp session-limit-group
<limit-group-name> | Display information about all session-limit groups or a specific session limit group. | [
{
"name": "limit-group-name",
"desc": "(Optional) Name of a session-limit group."
}
] | view
Output Fields
Table 1509 on page 26632 lists the output fields for the show services l2tp session-limit-group command.
Output fields are listed in the approximate order in which they appear.
Table 1509: show services l2tp session-limit-group Output Fields
Field Name
Field Description
Session-limit-group
Name of a ... | Command introduced in Junos OS Release 16.1. | [
"L2TP LAC Tunneling for Subscribers"
] | |
show services l2tp summary | show services l2tp summary
<interface sp-fpc/pic/port>
<statistics> | (M10i and M7i routers: LNS only. MX Series routers: LAC and LNS.) Display Layer 2 Tunneling Protocol
(L2TP) summary information. | [
{
"name": "none",
"desc": "Display complete L2TP summary information. For LNS on M Series routers, display L2TP summary information for all adaptive services interfaces. For LNS on MX Series routers, display L2TP summary information for all inline services interfaces."
},
{
"name": "interface sp-fpc... | view
Output Fields
Table 1510 on page 26635 lists the output fields for the show services l2tp summary command. Output
fields are listed in the approximate order in which they appear.
Table 1510: show services l2tp summary Output Fields
Field Name
Field Description
Administrative state
Administrative state of the tunn... | Command introduced before Junos OS Release 7.4.
Support for LAC on MX Series routers introduced in Junos OS Release 10.4.
Support for LNS on MX Series routers introduced in Junos OS Release 11.4.
Support for statistics option introduced in Junos OS Release 13.1. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services l2tp tunnel | show services l2tp tunnel
<brief | detail | extensive>
<interface sp-fpc/pic/port>
<local-gateway gateway-address>
<local-gateway-name gateway-name>
<local-tunnel-id tunnel-id>
<peer-gateway gateway-address>
<peer-gateway-name gateway-name>
<statistics>
<tunnel-group group-name> | (M10i and M7i routers only) Display information about active Layer 2 Tunneling Protocol (L2TP) tunnels
for LNS.
(MX Series routers only) Display information about L2TP tunnels for LAC and LNS; the tunnels may or
may not have active sessions. | [
{
"name": "none",
"desc": "Display standard information about all active L2TP tunnels."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Default) Display the specified level of output."
},
{
"name": "interface sp-fpc/pic/",
"desc": ""
},
... | view
Output Fields
Table 1511 on page 26644 lists the output fields for the show services l2tp tunnel command. Output fields
are listed in the approximate order in which they appear.
Table 1511: show services l2tp tunnel Output Fields
Field Name
Field Description
Interface
(LNS only) Name of an adaptive services inter... | Command introduced before Junos OS Release 7.4. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services l2tp tunnel-group | show services l2tp tunnel-group
<group-name> | Display information about all L2TP tunnel groups or a specific L2TP tunnel group. | [
{
"name": "group-name",
"desc": "(Optional) Name of a tunnel group."
}
] | view
Output Fields
Table 1512 on page 26652 lists the output fields for the show services l2tp tunnel-group command. Output
fields are listed in the approximate order in which they appear.
Table 1512: show services l2tp tunnel-group Output Fields
Field Name
Field Description
Tunnel-group
Name of a tunnel group.
Tunnels... | Command introduced in Junos OS Release 16.1. | [
"L2TP LAC Tunneling for Subscribers"
] | |
show services l2tp tunnel-switch destination | show services l2tp tunnel-switch destination
< detail | extensive>
<statistics> | Display information about L2TP switched tunnel destinations. | [
{
"name": "none",
"desc": "Display standard information for all L2TP switched tunnel destinations."
},
{
"name": "detail | extensive",
"desc": "(Optional) Display the specified level of information."
},
{
"name": "statistics",
"desc": "(Optional) Display the number of control packets... | view
Output Fields
Table 1513 on page 26655 lists the output fields for the show services l2tp tunnel-switch destination
command. Output fields are listed in the approximate order in which they appear.
Table 1513: show services l2tp tunnel-switch destination Output Fields
Field Name
Field Description
Level of Output
L... | Command introduced in Junos OS Release 13.2. | [] | |
show services l2tp tunnel-switch session | show services l2tp tunnel-switch session
<detail | extensive>
<statistics> | Display information about L2TP switched tunnel sessions. | [
{
"name": "none",
"desc": "Display standard information about all active L2TP switched tunnel sessions."
},
{
"name": "detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "statistics",
"desc": "(Optional) Display the number of control packets... | view
Output Fields
Table 1514 on page 26660 lists the output fields for the show services l2tp tunnel-switch session command.
Output fields are listed in the approximate order in which they appear.
Table 1514: show services l2tp tunnel-switch session Output Fields
Field Name
Field Description
Level of Output
Tunnel loc... | Command introduced in Junos OS Release 13.2. | [] | |
show services l2tp tunnel-switch summary | show services l2tp tunnel-switch summary
<statistics> | Display L2TP tunnel switch summary information. | [
{
"name": "none",
"desc": "Display complete L2TP switched tunnel summary information."
},
{
"name": "statistics",
"desc": "(Optional) Display the number of control packets and bytes transmitted and received for all switched tunnels and sessions."
}
] | view
Output Fields
Table 1515 on page 26667 lists the output fields for the show services l2tp tunnel-switch summary command.
Output fields are listed in the approximate order in which they appear.
Table 1515: show services l2tp tunnel-switch summary Output Fields
Field Name
Field Description
Tunnel switch profile name... | Command introduced in Junos OS Release 13.2. | [] | |
show services l2tp tunnel-switch tunnel | show services l2tp tunnel-switch tunnel
<detail | extensive>
<statistics> | Display information about L2TP switched tunnels. | [
{
"name": "none",
"desc": "Display standard information about all active L2TP tunnels."
},
{
"name": "detail | extensive",
"desc": "(Default) Display the specified level of output."
},
{
"name": "statistics",
"desc": "(Optional) Display the number of control packets and bytes transmi... | view
Output Fields
Table 1516 on page 26669 lists the output fields for the show services l2tp tunnel-switch tunnel command.
Output fields are listed in the approximate order in which they appear.
Table 1516: show services l2tp tunnel-switch tunnel Output Fields
Field Name
Field Description
Level of Output
Local ID
On ... | Command introduced in Junos OS Release 13.2. | [] | |
show services l2tp user | show services l2tp user
<brief | detail | extensive | statistics>
<user username> | (M10i and M7i routers only) Display a list of active Layer 2 Tunneling Protocol (L2TP) users. | [
{
"name": "none",
"desc": "Display all active L2TP users."
},
{
"name": "brief | detail | extensive |",
"desc": ""
},
{
"name": "statistics",
"desc": "(Optional) Display the specified level of output. Use the statistics option to display L2TP user statistics."
},
{
"name": "u... | view
Output Fields
Table 1517 on page 26676 lists the output fields for the show services l2tp user command. Output fields
are listed in the approximate order in which they appear.
Table 1517: show services l2tp user Output Fields
Field Name
Field Description
Interface
Name of an adaptive services interface.
Tunnel gro... | Command introduced before Junos OS Release 7.4. | [
"L2TP Services Configuration Overview",
"L2TP Minimum Configuration"
] | |
show services link-services cpu-usage | show services link-services cpu-usage
<brief | detail>
<interface interface-name> | (M Series and T Series routers only) Display information about Link Services IQ (LSQ) CPU usage. | [
{
"name": "none",
"desc": "Display standard information about CPU usage for all LSQ interfaces."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display information about the speci... | view
Output Fields
Table 1518 on page 26682 lists the output fields for the show services link-services cpu-usage command.
Output fields are listed in the approximate order in which they appear.
Table 1518: show services link-services cpu-usage Output Fields
Field Name
Field Description
Level of Output
Role
CPU functi... | Command introduced in Junos OS Release 8.4. | [] | |
show services lrf collector statistics | show services lrf collector statistics
<collector-name> | Display LRF statistics for one or more collectors. If a collector is not specified, statistics are displayed for
all collectors. | [
{
"name": "none",
"desc": "Display LRF statistics for all collectors."
},
{
"name": "collector-name",
"desc": "(Optional) Display LRF statistics for the specified collector."
}
] | view
Output Fields
Table 1519 on page 26688 lists the output fields for the show services lrf collector statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1519: show services lrf collector statistics Output Fields
Field Name
Field Description
Interface
Name of the interfac... | Statement introduced in Junos OS Release 17.1. | [
"Logging and Reporting Function for Subscribers"
] | |
show services lrf rule statistics | show services lrf rule statistics
<rule-name> | Display LRF statistics for one or more LRF rules. If an LRF rule is not specified, statistics are displayed
for all LRF rules. | [
{
"name": "none",
"desc": "Display LRF statistics for all LRF rules."
},
{
"name": "rule-name",
"desc": "(Optional) Display LRF statistics for the specified LRF rule."
}
] | view
Output Fields
Table 1520 on page 26690 lists the output fields for the show services lrf rule statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1520: show services lrf rule statistics Output Fields
Field Name
Field Description
Interface
Name of the interface from whi... | Statement introduced in Junos OS Release 17.1. | [
"Logging and Reporting Function for Subscribers"
] | |
show services lrf statistics | show services lrf statistics | Display number of bytes, packets, and flows for carrying data records to the collector. | [] | view
Output Fields
Table 1521 on page 26693 lists the output fields for the show services lrf statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1521: show services lrf statistics Output Fields
Field Name
Field Description
Interface
Name of the interface from which data r... | Statement introduced in Junos OS Release 17.1. | [
"Logging and Reporting Function for Subscribers"
] | |
show services lrf template | show services lrf template option | Display the fields for a template type. You must specify a template type. | [
{
"name": "option",
"desc": "Specify one of the following template types:"
},
{
"name": "device-data",
"desc": "Display the fields for the Device Data template type."
},
{
"name": "flow-id",
"desc": "Display the fields for the Flow ID template type."
},
{
"name": "http",
... | view
Sample Output
show services lrf template ipv4
user@host> show services lrf template ipv4
LRF Template fields
Ipv4 source address
Ipv4 destination address
TCP/UDP source port
TCP/UDP destination port
show services lrf template ipflow-extended
user@host> show services lrf template ipflow-extended
Fie... | Statement introduced in Junos OS Release 17.1. | [
"Logging and Reporting Function for Subscribers"
] | |
show services mobile-edge anchor class-of-service | show services mobile-edge anchor class-of-service | This command displays information about the configuration of the downlink forwarding queues. | [] | view
Output Fields
Table 1522 on page 26697 lists the output fields for the show services mobile-edge anchor class-of-service
command.
Table 1522: show services mobile-edge anchor class-of-service Output Fields
Field Name
Field Description
Excess priority
Best-effort priority level assigned to a given queue.
Table 152... | Juniper Networks introduced this command in Junos OS Release 22.2R1. | [] | |
show services mobile-edge peers | show services mobile-edge peers
<statistics> | This command gives information on SAEGW-C and access network peers known to the SAEGW-U. | [
{
"name": "none",
"desc": "This command gives information on SAEGW-C and access network peers known to the SAEGW-U."
},
{
"name": "statistics",
"desc": "This command gives protocol statistics on SAEGW-C and access network peers known to the SAEGW-U."
}
] | view
Output Fields
Table 1523 on page 26701 describes the output fields for the show services mobile-edge peers command.
Output fields are listed in the approximate order in which they appear.
Table 1523: show services mobile-edge peers Output Fields
Field Name
Field Description
Peers Summary
The Peers Summary field p... | Command introduced in Junos OS 19.4R1.
Fields for Load and Overload Control introduced in Junos OS Release 23.1R1. | [
"Example: Configuring an MX Router as an SAEGW-U"
] | |
show services mobile-edge resources call-admission-control statistics | show services mobile-edge resources call-admission-control statistics | This command displays information about the bandwidth currently allocated to the guaranteed bit rate
queues on each anchor Packet Forwarding Engine. It also displays the Call Admission Control (CAC)
statistics. | [] | view
Output Fields
Table 1524 on page 26705 lists the output fields for the show services mobile-edge resources call-admission-
control statistics command.
Table 1524: show services mobile-edge resources call-admission-control statistics Output Fields
Field Name
Field Description
Allocated bandwidth
Amount of bandwidth... | Juniper Networks introduced this command in Junos OS Release 22.2R1. | [] | |
show services mobile-edge sessions | show services mobile-edge sessions
<control-plane-peers | detail | extensive | histogram | summary>
show services mobile-edge sessions control-plane-peers
<address>
show services mobile-edge sessions detail
<control-plane-peers | transient-sessions>
show services mobile-edge sessions extensive
<local-seid | transient-s... | This command gives information on mobile sessions active on the SAEGW-U/SGW-U/PGW-U/UPF.
NOTE: The backup routing engine (RE) supports only the top level of the show services
mobile-edge sessions summary command and not any of its sub-options. | [
{
"name": "none",
"desc": "Display information on mobile sessions active on the SAEGW-U/SGW-U/PGW-U/UPF."
},
{
"name": "control-plane-peers",
"desc": "Display information on mobile sessions for a specific or all SAEGW-Cs/SGW-C/ PGW-C/SMF."
},
{
"name": "detail",
"desc": "Display deta... | view
Output Fields
Table 1525 on page 26708 describes the output fields for the show services mobile-edge sessions command.
Output fields are listed in the approximate order in which they appear.
Table 1525: show services mobile-edge sessions Output Fields
Field Name
Field Description
Session-address
IP address of the ... | Command introduced in Junos OS 19.4R1.
core-network-peers option introduced in Junos OS 20.4R1.
Framed IPv6 Route options introduced in Junos OS 22.4R1.
transient-sessions and histogramoptions introduced in Junos OS 23.4R1. | [
"No Link Title"
] | |
show services mobile-edge summary | show services mobile-edge summary | This command gives summary information on the SAEGW-U. | [] | view
Output Fields
Table 1526 on page 26729 describes the output fields for the show services mobile-edge summary command.
Output fields are listed in the approximate order in which they appear.
Table 1526: show services mobile-edge summary Output Fields
Field Name
Field Description
Graceful-Restart
Whether graceful-re... | Command introduced in Junos OS 19.4R1.
Additional fields for Load and Overload Information added in Junos OS Release 23.1R1. | [
"Example: Configuring an MX Router as an SAEGW-U"
] | |
show services monitoring rfc2544 | show services monitoring rfc2544
(active-tests <extensive>| terminated-tests <extensive> | summary) | Display information about the results of each category or state of the RFC 2544-based benchmarking
tests, such as terminated tests and active tests. You can also display summary statistics about the total
number of tests of each state for a high-level, quick analysis. The values in the output displayed vary,
depending ... | [
{
"name": "active-tests",
"desc": ""
},
{
"name": "<extensive>",
"desc": "Display the results of the set of tests that are currently running."
},
{
"name": "terminated-tests",
"desc": ""
},
{
"name": "<extensive>",
"desc": "Display the list of tests that were terminated o... | view
Output Fields
Table 1527 on page 26733 lists the output fields for the show services monitoring rfc2544 command.
Table 1527: show services monitoring rfc2544 Output Fields
Field Name
Field Description
Counters last cleared
Date, time, and how long ago the statistics for the test were cleared. The format is year-
m... | Command introduced in Junos OS Evolved Release 21.1R1. | [] | |
show services monitoring rfc2544 | show services monitoring rfc2544
<active-tests>
<completed-tests>
<detail>
<extensive>
<summary>
<terminated-tests>
<test-id test-id> | Display information about the results of the RFC 2544-based benchmarking test for a specific test ID or
for a category of tests. The values in the output displayed vary, depending on the state in which the test
is passing through, when you issue the command. | [
{
"name": "active-tests",
"desc": "(Optional) Display results for all active RFC 2544 benchmarking tests."
},
{
"name": "completed-tests",
"desc": "(Optional) Display results for all completed RFC 2544 benchmarking tests."
},
{
"name": "detail",
"desc": "(Optional) When specified wit... | view
Output Fields
Table 1527 on page 26733 lists the output fields for the show services monitoring rfc2544 test-id command.
Table 1528: show services monitoring rfc2544 test-id Output Fields
Field Name
Field Description
Counters last cleared
Date, time, and how long ago the statistics for the test were cleared. The f... | Command introduced in Junos OS Evolved Release 21.1R1.
active-tests, completed-tests, detail, summary, and terminated-tests options introduced in Junos OS Evolved
Release 22.4R1. | [] | |
show services monitoring rpm history-results | show services monitoring rpm history-results
owner name
<brief | detail>
<since time>
<source-address address>
<target address>
<test name> | Display the results stored for the specified real-time performance monitoring (RPM) probes. | [
{
"name": "owner name",
"desc": "(Required) Display information for probes with the specified probe owner."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Default: brief"
},
{
"name": "since time",
"desc": "(Optional) Display information fr... | view
Output Fields
Table 1529 on page 26745 lists the output fields for the show services monitoring rpm history-results
command. Output fields are listed in the approximate order in which they appear.
Table 1529: show services monitoring rpm history-results Output Fields
Field Name
Field Description
Level of Output
Ow... | Command introduced in Junos OS Evolved Release 20.1R1. | [] | |
show services monitoring rpm probe-results | show services monitoring rpm probe-results
<owner name>
<source-address address>
<status (FAIL | PASS) >
<target address>
<test name> | Display the results of the most recent real-time performance monitoring (RPM) probes. | [
{
"name": "owner name",
"desc": "(Optional) Display information only for probes with the specified probe owner name. owner is required if you want to specify the test option."
},
{
"name": "source-address",
"desc": ""
},
{
"name": "address",
"desc": "(Optional) Display information on... | view
Output Fields
Table 1530 on page 26752 lists the output fields for the show services monitoring rpm probe-results
command. Output fields are listed in the approximate order in which they appear.
Table 1530: show services rpm probe-results Output Fields
Field Name
Field Description
Level of Output
Owner
Owner name.... | Command introduced in Junos OS Evolved Release 20.1R1. | [] | |
show services monitoring twamp client control-info | show services monitoring twamp client control-info
<control-connection control-connection-name> | Display information about the control connections established between the Two-Way Active
Measurement Protocol (TWAMP) server and control clients. By default, all established sessions are
displayed, unless you specify the control-connection option when you issue the command. | [
{
"name": "control-connection control-connection-name",
"desc": "(Optional) Display information about the specified control connection."
}
] | view
Output Fields
Table 1531 on page 26762 lists the output fields for the show services monitoring twamp client control-info
command. Output fields are listed in the approximate order in which they appear.
Table 1531: show services monitoring twamp client control-info Output Fields
Field Name
Field Description
Levels... | Command introduced in Junos OS Evolved 20.3R1. | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services monitoring twamp client history-results | show services rpm twamp client history-results
control-connection control-connection-name
<detail>
<since time>
<source-address address>
<target address>
<test-session test-session-name> | Display standard information about the results of the last 50 probes for a Two-Way Active
Measurement Protocol (TWAMP) control connection. You can also view the history results of the probes
or test packets sent from a TWAMP client to a TWAMP server by source address, by target address, or
for a specific test session a... | [
{
"name": "<control-connection",
"desc": ""
},
{
"name": "control-connection-name>",
"desc": "(Required) Display information for the specified control connection between a TWAMP client and a TWAMP server."
},
{
"name": "detail",
"desc": "(Optional) Display detailed information about ... | view
Output Fields
Table 1532 on page 26765 lists the output fields for the show services monitoring twamp client history-
results command. Output fields are listed in the approximate order in which they appear.
Table 1532: show services monitoring twamp client history-results Output Fields
Field Name
Field Description... | Command introduced in Junos OS Evolved 20.3R1.
Command output fields for inferred egress loss, egress delay and jitter, and ingress delay and jitter
introduced in Junos OS Evolved 23.4R1. | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services monitoring twamp client probe-results | show services monitoring twamp client probe-results
<control-connection control-connection-name>
<source-address>
<status (FAIL | PASS)>
<target>
<test-session test-session-name> | Display the results of the most recent Two-Way Active Measurement Protocol (TWAMP) probes. By
default, all probe results are displayed, unless you specify the control-connection option when you issue
the command. The control-connection option is required when you want to issue the command with
one of the other options.... | [
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-connection-name",
"desc": "(Optional, but required if specifying one of other options as well) Display probe results for the specified control connection between a TWAMP client and a TWAMP server."
},
{
"name": "source-addr... | view
Output Fields
Table 1533 on page 26773 lists the output fields for the show services monitoring twamp client probe-results
command. Output fields are listed in the approximate order in which they appear.
Table 1533: show services monitoring twamp client probe-results Output Fields
Field Name
Field Description
Lev... | Command introduced in Junos OS Evolved 20.3R1.
Command output fields for inferred egress loss, egress delay and jitter, and ingress delay and jitter
introduced in Junos OS Evolved 23.4R1. | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services monitoring twamp client test-info | show services monitoring twamp client test-info
<control-connection control-connection-name>
<test-session test-session-name> | Display information about the test sessions established between the Two-Way Active Measurement
Protocol (TWAMP) server and control clients. By default, information for all established control
connections and test sessions are displayed, unless you specify the control-connection option when you
issue the command. The co... | [
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-connection-name",
"desc": "(Optional, but required if specifying the test-session option) Display information about the test sessions on the specified control connection, which is established for control packets exchanged between a... | view
Output Fields
Table 1534 on page 26784 lists the output fields for the show services monitoring twamp client test-info
command. Output fields are listed in the approximate order in which they appear.
Table 1534: show services monitoring twamp client test-info Output Fields
Field Name
Field Description
Level of Out... | Command introduced in Junos Evolved 20.3R1 . | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services monitoring twamp server control-info | show services monitoring twamp server control-info
<control-connection control-identifier> | Display information about the control connections established between the Two-Way Active
Measurement Protocol (TWAMP) server and control-clients for managed servers. By default, all
established control connections are displayed, unless you specify the control-connection option when
you issue the command. Because TWAMP ... | [
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-identifier",
"desc": "(Optional) Specify the numeric identifier for a control connection to display information about that control connection."
}
] | view
Output Fields
Table 1535 on page 26786 lists the output fields for the show services monitoring twamp server control-info
command. Output fields are listed in the approximate order in which they appear.
Table 1535: show services monitoring twamp server control-info Output Fields
Field Name
Field Description
Level ... | Command introduced in Junos OS Evolved 20.3R1. | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services monitoring twamp server test-info | show services monitoring twamp server test-info
<control-connection control-identifier>
<test-session test-identifier> | Display information about the test sessions established between the Two-Way Active Measurement
Protocol (TWAMP) server and control-clients. By default, all established test sessions are displayed,
unless you specify the control-connection option when you issue the command. The control-connection
option is required when... | [
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-identifier",
"desc": "(Optional, but required if specifying the test-session option) Specify a numeric identifier to display information about the specified control connection, which is established for control packets exchanged bet... | view
Output Fields
Table 1536 on page 26789 lists the output fields for the show services monitoring twamp server test-info
command. Output fields are listed in the approximate order in which they appear.
Table 1536: show services monitoring twamp server test-info Output Fields
Field Name
Field Description
Level of Out... | Command introduced in Junos OS Evolved 20.3R1. | [
"Understanding Two-Way Active Measurement Protocol on Routers"
] | |
show services nat destination pool | show services nat destination pool
<interface interface-name>
<service-set service set>
<all> | Interface
Interface name.
Service set
Service set name.
Pool name
Pool name.
Pool id
Pool identification.
Total address
Number of IP addresses that are in use.
Translation hits
Number of times a translation in the translation table is used for a source
NAT rule.
Address range
IP address range in the source pool.
Port
P... | [
{
"name": "interface interface-name>",
"desc": "Optional. Display destination NAT information specific to the interface."
},
{
"name": "service-set service-set>",
"desc": "Optional. Display destination NAT information specific to the service set."
},
{
"name": "all",
"desc": "Optiona... | view
Output Fields
Table 1537 on page 26792lists the output fields for the show services nat destination pool command.
Output fields are listed in the approximate order in which they appear.
Table 1537: show services nat destination pool Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat destination rule | show services nat destination rule
rule-name
<service-set service-set>
<interface interface-name>
<all> | Match-direction
Three options:
•
input―Apply the rule match on the input side of the interface.
•
input-output―Apply the rule match bidirectionally.
•
output―Apply the rule match on the output side of the interface.
Destination addresses
Name of the destination addresses that match the rule. The default value is any.
A... | [
{
"name": "rule-name",
"desc": "Display information about the specified destination NAT rule."
},
{
"name": "service-set service-set",
"desc": "Display information specific to the service-set."
},
{
"name": "interface interface-name",
"desc": "Display information specific to the inte... | view
Output Fields
Table 1538 on page 26794 lists the output fields for the show services nat destination rule command.
Output fields are listed in the approximate order in which they appear.
Table 1538: show services nat destination rule Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat destination summary | show services nat destination summary
<interface interface-name>
<service-set service-set> | Address Range
IP address or IP address range for the pool.
Routing Instance
Name of the routing instance.
Port
Port number.
Total Address
Number of IP addresses that are in use.
Rule name
Rule name.
Rule set
The set of rules for destination NAT.
Match-direction
Three options:
•
input―Apply the rule match on the input s... | [
{
"name": "interface interface-name",
"desc": "Display summary destination NAT information for the specified service interface."
},
{
"name": "service-set service-set",
"desc": "Display summary destination NAT information for the specified service set."
}
] | view
Output Fields
Table 1539 on page 26797 lists the output fields for the show services nat destination summary command.
Output fields are listed in the approximate order in which they appear.
Table 1539: show services nat destination summary Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat deterministic-nat internal-host | show services nat deterministic-nat internal-host
nat-address
nat-port | This commands prints the internal host address and algorithmically determined port ranges for the
specified NAT IP address and port number. The results are calculated on the PIC and the results are sent
to RE. | [
{
"name": "nat-address",
"desc": "NAT address of the internal host."
},
{
"name": "nat-port",
"desc": "NAT port of the internal host."
}
] | view
Output Fields
Table 1540 on page 26800 lists the output fields for the nat deterministic-nat internal-host command.
Output fields are listed in the approximate order in which they appear.
Table 1540: show services nat deterministic-nat internal-host Output Fields
Field Name
Field Description
Interface
Name of a se... | Command introduced in Junos OS Release 12.1. | [] | |
show services nat deterministic-nat nat-port-block | show services nat deterministic-nat nat-port-block
internal-host | Display the translated NAT address and port ranges for the given internal host. | [
{
"name": "internal-host",
"desc": "IP address of the internal host."
}
] | view
Output Fields
Table 1541 on page 26802 lists the output fields for the show services nat deterministic-nat nat-port-block
command. Output fields are listed in the approximate order in which they appear.
Table 1541: show services nat deterministic-nat nat-port-block Output Fields
Field Name
Field Description
Interf... | Command introduced in Junos OS Release 12.1. | [] | |
show services nat ipv6-multicast-interfaces | show services nat ipv6-multicast-interfaces | Displays a list of interfaces enabled for IPv6 multicast. | [] | view
Output Fields
Table 1542 on page 26804 lists the output fields for the show services nat ipv6-multicast-interfaces
command. Output fields are listed in the approximate order in which they appear.
Table 1542: show services nat ipv6-multicast-interfaces Output Fields
Field Name
Field Description
Level of Output
Inte... | Command introduced in Junos OS Release 8.5. | [] | |
show services nat pool | show services nat pool
<brief | detail>
<pool-name>
pgcp <ports-per-session | remotely-controlled> | Display information about Network Address Translation (NAT) pools.
NOTE: On MS-MPCs and MS-MICs, if the line cards receive a packet immediately after
the active port block timeout interval has expired, a new port block is allocated and the
old port block is released thereafter (if no more ports are being used from that... | [
{
"name": "none",
"desc": "Display standard information about all NAT pools."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "pool-name",
"desc": "(Optional) Display information about the specified NAT pool."
},
{
"name... | view
Output Fields
Table 1543 on page 26809 lists the output fields for the show services nat pool command. Output fields
are listed in the approximate order in which they appear.
Table 1543: show services nat pool Output Fields
Field Name
Field Description
Level of Output
Interface
Name of an adaptive services interf... | Command introduced before Junos OS Release 7.4.
pgcp option added in Junos OS Release 8.5. | [] | |
show services nat resource-usage source-pool | show services nat resource-usage source-pool
<all>
pool-name | Pool
Name of the pool.
Address
Address of the pool.
Used
Number of used resources in the pool.
Available
Number of available resources in the pool.
Total
Total number of addresses in the pool.
Usage
Percent of resources used.
Sample Output
show services nat resource-usage source-pool all
user@host> show services nat r... | [
{
"name": "<all>",
"desc": "Display all NAT resource usage statistics."
},
{
"name": "pool-name",
"desc": "Display NAT resource usage statistics for the specified pool."
}
] | view
Output Fields
Table 1544 on page 26816 lists the output fields for the show services nat resource-usage command.
Output fields are listed in the approximate order in which they appear.
Table 1544: show services nat resource-usage Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat source deterministic | show services source nat deterministic
host-address-range
host-ip ip-address
pool pool-name
xlated-ip translated-ip-address
xlated-port translated-port-number | Display deterministic port block allocation information. | [
{
"name": "host-address-range",
"desc": "Display the deterministic host address range without overlap."
},
{
"name": "host-ip ip-address",
"desc": "Display the internal host IP address."
},
{
"name": "pool pool-name",
"desc": "Display the source NAT pool."
},
{
"name": "xlate... | view
Output Fields
Table 1545 on page 26819 lists the output fields for the command. Output fields are listed in the
approximate order in which they appear.
Table 1545: show services nat source deterministic Output Fields
Field Name
Field Description
Pool name
Name of the NAT source pool.
Port overloading
factor
Factor... | This command was introduced in Junos OS 19.3R2. | [] | |
show services nat source mappings address-pooling-paired | show services nat source mappings address-pooling-paired | Displays NAT source mappings address pooling information | [
{
"name": "address-pooling-paired",
"desc": "(Optional) Display only information about address-pooling paired mappings."
},
{
"name": "endpoint-independent",
"desc": "(Optional) Display only information about endpoint-independent mappings."
},
{
"name": "pcp",
"desc": "(Optional) Dis... | view
Sample Output
show services nat source mappings address-pooling-paired
user@host> show services nat source mappings address-pooling-paired
Interface: ms-2/0/0, Service set: ss1
Pool name: sp1
Internal address External address Session Count Mapping State
1.1.1.100 ... | [] | ||
show services nat source mappings endpoint-independent | show services nat source mappings endpoint-independent
<pool-name>
<private | public> | Interface
Name of the interface.
Service set
Name of the service set.
NAT pool
Name of the NAT pool.
Mapping
Shows the mapping of IP addresses.
Session Count
Number of sessions currently using the mapping.
Mapping State
NAT mapping state. The following states are possible:
•
ACTIVE―Indicates that the entry is active an... | [
{
"name": "<pool-name>",
"desc": "Name of address pool."
},
{
"name": "<private>",
"desc": "Private IPv4/IPv6 prefix to use as a filter."
},
{
"name": "<public>",
"desc": "Public IP prefix to use as a filter."
}
] | view
Output Fields
Table 1546 on page 26826 lists the output fields from the show services nat source mappings endpoint-
independent command. Output fields are listed in the approximate order in which they appear.
Table 1546: show services nat source mappings endpoint-independent Output Fields
Field Name | Command introduced in Junos OS 19.3R2.
Support for Next Gen Services with the MX-SPC3 security services card added in Junos OS Release
20.2. | [] | |
show services nat source mappings pcp | show services nat source mappings pcp
<interface interface-name>
<service-set service-set.> | Display NAT source mapping for PCP. | [
{
"name": "interface interface-name",
"desc": "Display PCP source NAT mapping for the specified interface."
},
{
"name": "service-set service-set",
"desc": "Display PCP source NAT mapping for the specified service set."
}
] | view
Sample Output
show services nat source mappings pcp
user@host> show services nat source mappings pcp Interface: vms-0/0/0, Service set: in
NAT pool: p
PCP Client : 10.1.1.2 PCP lifetime : 995
Mapping : 10.1.1.2 : 9000 --> 8.8.8.8 : 1025
Session Count : 1
Mappin... | Command introduced in Junos OS 20.1R1. | [] | |
show services nat source mappings summary | show services nat source mappings summary
<interface interface-name>
<service-set service-set.> | Display NAT mapping summary information. | [
{
"name": "interface interface-name",
"desc": "Display source NAT mapping information for the specified interface."
},
{
"name": "service-set service-set",
"desc": "Display source NAT mapping information for the specified service set."
}
] | view
Output Fields
Table 1547 on page 26831 lists the output fields for the show services nat source mappings summary
command. Output fields are listed in the approximate order in which they appear.
Table 1547: show services nat source mappings summary Output Fields
Field Name
Field Description
Service Interface
Name o... | Command introduced in Junos OS 19.3R2. | [] | |
show services nat source pool | show services nat source pool pool-name
<all>
<interface interface-name>
<service-set service-set> | Ei-mapping-timeout
Duration for endpoint independent translations that use the
specified NAT pool.
Mapping-timeout
Duration for mappings that use the specified NAT pool.
EIF Inbound session count
Number of EIF inbound sessions.
EIF Inbound session limit exceeded drops
Number of EIF inbound sessions that exceed the drop... | [
{
"name": "pool-name",
"desc": "Display information about the specified pool."
},
{
"name": "all",
"desc": "Display all source NAT pool information."
},
{
"name": "interface interface-name",
"desc": "Display information specific to the adaptive services interface."
},
{
"name... | view
Output Fields
Table 1548 on page 26833 lists the output fields for the show services nat source pool command. Output
fields are listed in the approximate order in which they appear.
Table 1548: show services nat source pool Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat source port-block | show services nat source port-block
<host-ip ip-address>
<pool pool-name>
<xlated-ip translated-ip-address>
<xlated-port translated-port-number> | Display port block allocation information. | [
{
"name": "host-ip ip-address",
"desc": "Display port block allocation information for the specified host."
},
{
"name": "pool pool-name",
"desc": "Display port block allocation information for the specified pool."
},
{
"name": "xlated-ip translated-ip-address",
"desc": "Display port... | view
Output Fields
Table 1549 on page 26839 lists the output fields for the show services nat source port block command.
Output fields are listed in the approximate order in which they appear.
Table 1549: show services nat source port block Output Fields
Field Name
Field Description
Pool name
Name of the pool.
Port-ove... | Command introduced in Junos OS 19.3R2. | [] | |
show services nat source rule | show services nat source rule
rule-name
<all>
<interface interface-name>
<service-set service-set> | Rule Id
Rule identification number.
Rule position
Position of the source NAT rule.
Match-direction
Specifies the direction in which to match traffic that meets
the rule conditions.
Match
•
Source address
•
Destination address
•
Application
Match the following:
•
Name of the source address that matches the rule.
•
Name ... | [
{
"name": "rule-name",
"desc": "Display source NAT rule-set information for the specified rule."
},
{
"name": "all",
"desc": "Display all source NAT rule-set information."
},
{
"name": "interface interface-name",
"desc": "Display rule-set information about the adaptive services inter... | view
Output Fields
Table 1550 on page 26842 lists the output fields for the show services nat source rule command. Output
fields are described in the approximate order in which they appear.
Table 1550: show services nat source rule Output Fields
Field Name | Command introduced in Junos OS 19.3R2. | [] | |
show services nat source rule-application | show services nat source rule-application
<all>
<interface interface-name>
<service-set service-set> | Source NAT rule
•
Rule-set
•
Rule-Id
•
Match-direction
•
Application
•
IP Protocol
•
Source port range
•
Destination port range
The name of the source NAT rule.
•
Set of rules for matching traffic.
•
Rule identification number.
•
Specifies the direction in which to match traffic that meets the
rule conditions.
•
Name o... | [
{
"name": "all",
"desc": "Display all source NAT rule application information."
},
{
"name": "interface interface-name",
"desc": "Display source NAT rule application information for the specified interface."
},
{
"name": "service-set service-set",
"desc": "Display source NAT rule app... | view
Output Fields
Table 1551 on page 26846 lists the output fields for the show services nat source rule-application
command. Output fields are described in the approximate order in which they appear.
Table 1551: show services nat source rule-application Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services nat source summary | show services nat source summary
<interface interface-name>
<service-set service-set> | Interface
Interface name.
Service set
Service set name.
Pool Name
Name of the source address pool.
Address Range
IP address or IP address range for the pool.
Routing Instance
Name of the routing instance.
PAT
Whether Port Address Translation (PAT) is enabled (yes or
no).
Total Address
Number of IP addresses that are in... | [
{
"name": "interface interface-name",
"desc": "Display source NAT summary information for the specified interface."
},
{
"name": "service-set service-set",
"desc": "Display source NAT summary information for the specified service set."
}
] | view
Output Fields
Table 1552 on page 26849 lists the output fields for the show services nat source summary command.
Output fields are listed in the approximate order in which they appear.
Table 1552: show services nat source summary Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services paa status | show services paa status | Get the status of the Paragon Active Assurance (PAA) test agent. Because the test agent software is in a
Docker container, the states reported with this command are the same as the states reported by a docker
inspect command.
Additional Information
You can also use NETCONF to get the status of the PAA test agent:
<... | [] | view
Output Fields
Table 1553 on page 26852 lists the output fields for the show services paa status command.
Table 1553: show services paa status Output Fields
Field Name
Field Description
Container Status
Status of the PAA test agent and its Docker container. The possible statuses are:
•
Created—The Docker container... | Command introduced in Junos OS Evolved Release 22.3R1. | [
"Install the Paragon Active Assurance (PAA) Test Agent"
] | |
show services pcef pic | show services pcef pic
<fpc-slot slot-number>
<pic-slot pic-number> | Displays the number of Junos OS Subscriber Management subscribers present on each service PIC who
are a using policy control and enforcement function (PCEF) profile to define the treatment to apply to
packets associated with specific applications (for example, Facebook) or to specific service data flows. | [
{
"name": "fpc-slot slot-number",
"desc": "(Optional) Display the number of PCEF subscribers present on the specified FPC."
},
{
"name": "pic-slot pic-number",
"desc": "(Optional) Display the number of PCEF subscribers present on the specified PIC."
}
] | view
Output Fields
Table 1554 on page 26857 lists the output fields for the show services pcef pic command. Output fields
are listed in the approximate order in which they appear.
Table 1554: show services pcef pic Output Fields
Field Name
Field Description
FPC Slot
FPC slot on which the PCEF subscribers are present.
... | Command introduced in Junos OS Release 17.2. | [] | |
show services pcef subscribers | show services pcef subscribers
<detail | extensive | summary | terse>
<aci-interface-set-name aci-interface-set-name>
<address address>
<agent-circuit-identifier agent-circuit-identifier-substring>
<client-type client-type>
<count>
<id>
<interface interface>
<logical-system logical-system>
<mac-address mac-address>
<ph... | Displays information for Junos OS Subscriber Management subscribers who are a using policy control
and enforcement function (PCEF) profile to define the treatment to apply to packets associated with
specific applications (for example, Facebook) or to specific service data flows. | [
{
"name": "detail |",
"desc": ""
},
{
"name": "extensive |",
"desc": ""
},
{
"name": "summary | terse",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "aci-interface-set-name",
"desc": "(Optional) Display all dynamic subscriber sessions that use ... | view
Output Fields
Table 1555 on page 26861 lists the output fields for the show services pcef subscribers command. Output
fields are listed in the approximate order in which they appear.
Table 1555: show services pcef subscribers Output Fields
Field Name
Field Description
Level of Output
Interface
Interface associated... | Command introduced in Junos OS Release 17.2. | [] | |
show services pcp statistics | show services pcp statistics | Display information PCP mappings. | [] | view
Output Fields
Table 1556 on page 26868 lists the output fields for the show services pcp statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1556: show services pcp statistics Output Fields
Field Name
Field Description
Services PIC Name
Name of a service interface.
Pro... | Command introduced in Junos OS Release 13.2 | [] | |
show services policies detail | show services policies detail | Destination addresses
Name of the destination address (or address set) as it was entered in the
destination zone’s address book. A packet’s destination address must
match this value for the policy to apply to it.
Application
IP protocol
Inactivity timeout
Source port range
Destination port range
Per policy TCP Options
... | [] | view
Output Fields
Table 1557 on page 26872 lists the output fields for the show services policies detail command. Output
fields are listed in the approximate order in which they appear.
Table 1557: show services policies detail
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services policies hit-count | show services policies hit-count | Display the hit count of policies. | [] | view
Output Fields
Sample Output
show services policies hit-count
user@host> show services policies hit-count
Index Service Set Interface Name Sfw rule Direction Policy
count
1 JNPR-NH-SSET vms-0/2/0 p1 sfw1
input 0
... | Command introduced in Junos OS Release 19.3R2. | [] | |
show services policies interface | show services policies interface interface-name | Display services policies for the specified interface. | [] | view
Output Fields
Sample Output
show services policies interface vms-0/2/0
user@host> show services policies interface vms-0/2/0
Default policy: deny-all
Policy: p1, State: enabled, Index: 1007, Scope Policy: 0, Sequence number: 1
Stateful firewall rule: sfw1, Service set: JNPR-NH-SSET, Interface: vms-0/2/0, M... | Command introduced in Junos OS Release 19.3R2. | [] | |
show services policies service-set | show services policies service-set service-set | Display policy information for the specified service set. | [] | view
Output Fields
Sample Output
show services policies service-set
user@host> show services policies service-set JNPR-NH-SSET
Default policy: deny-all
Policy: p1, State: enabled, Index: 1007, Scope Policy: 0, Sequence number: 1
Stateful firewall rule: sfw1, Service set: JNPR-NH-SSET, Interface: vms-0/2/0, Matc... | Command introduced in Junos OS Release 19.3R2. | [] | |
show services policies | show services policies | State
Status of the policy:
•
enabled: The policy can be used in the policy lookup process, which
determines access rights for a packet and the action taken in regard
to it.
•
disabled: The policy cannot be used in the policy lookup process,
and therefore it is not available for access control.
Index
Internal number as... | [] | view
Output Fields
Table 1558 on page 26880 lists the output fields for the show services policies command. Fields are listed
in the approximate order in which they appear.
Table 1558: show services policies Output Fields
Field Name | Command introduced in Junos OS Release 19.3R2. | [] | |
show services redundancy-group | show services redundancy-group
<rg-id>
<brief | extensive | terse> | Display redundancy group status information for all redundancy groups or a specified redundancy group. | [
{
"name": "rg-id",
"desc": "(Optional) Name of a specific redundancy group."
},
{
"name": "brief | extensive | terse",
"desc": "(Optional) Display the specified level of output. When no level is specified, display terse level output. Default: terse"
}
] | view
Output Fields
Table 1559 on page 26883 lists the output fields for the show services redundancy-group command. Output
fields are listed in the approximate order in which they appear.
Table 1559: show services redundancy-group Output Fields
Field Name
Field Description
Level of Output
ICCP process
connection
Status... | Statement introduced in Junos OS Release 16.1. | [] | |
show services rpm active-servers | show services rpm active-servers | Display the protocols and corresponding ports for which a router or switch is configured as a real-time
performance monitoring (RPM) server. | [] | view
Output Fields
Table 1560 on page 26895 lists the output fields for the show services rpm active-servers command.
Output fields are listed in the approximate order in which they appear.
Table 1560: show services rpm active-servers Output Fields
Field Name
Field Description
Protocol
Protocol configured on the receiv... | Command introduced before Junos OS Release 7.4. | [] | |
show services rpm history-results | show services rpm history-results
<brief | detail>
<dst-interface interface-name>
<owner owner>
<limit number>
<since time>
<source-address address>
<target-address address>
<test name> | Display the results stored for the specified real-time performance monitoring (RPM) probes. | [
{
"name": "none",
"desc": "(Optional) Display the results of the last 50 probes for all RPM instances."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "dst-interface",
"desc": ""
},
{
"name": "interface-name",
"desc... | view
Output Fields
Table 1561 on page 26898 lists the output fields for the show services rpm history-results command.
Output fields are listed in the approximate order in which they appear.
Table 1561: show services rpm history-results Output Fields
Field Name
Field Description
Level of Output
Owner
Probe owner.
All ... | Command introduced before Junos OS Release 7.4.
dst-interface, limit, source-address, and target-address options introduced in Junos OS Release 18.1R1 on
MX Series.
owner and test options became optional in Junos OS Release 18.1R1 on MX Series. | [] | |
show services rpm probe-results | show services rpm probe-results
<dst-interface interface-name>
<limit number>
<owner owner>
<source-address address>
<status (fail | pass) >
<target-address address>
<terse>
<test name> | Display the results of the most recent real-time performance monitoring (RPM) probes. | [
{
"name": "dst-interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "(Optional) Display information only for RPM probes that are configured on this MS-MPC or MS-MIC services interface. This option works only for RPM probes generated on an MS-MPC or MS-MIC services interface."
},
{
... | view
Output Fields
Table 1562 on page 26904 lists the output fields for the show services rpm probe-results command. Output
fields are listed in the approximate order in which they appear.
Table 1562: show services rpm probe-results Output Fields
Field Name
Field Description
Level of Output
Owner
Owner name. When you ... | Command introduced before Junos OS Release 7.4.
dst-interface, limit, source-address, status, target-address, and terse options introduced in Junos OS Release
18.1R1 on MX Series. | [] | |
show services rpm rfc2544-benchmarking test-id | show services rpm rfc2544-benchmarking test-id test-id
<brief | detail> | Display information about the results of the RFC 2544-based benchmarking test for a specific test ID for
each real-time performance monitoring (RPM) instance. The values in the output displayed vary,
depending on the state in which the test is passing through, when you issue the command. | [
{
"name": "test-id",
"desc": "Display test results for the specified unique identifier."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
}
] | view
Output Fields
Table 1563 on page 26922 lists the output fields for the show services rpm rfc2544-benchmarking test-id
command. Output fields are listed in the approximate order in which they appear.
Table 1563: show services rpm rfc2544-benchmarking test-id Output Fields
Field Name
Field Description
Level of Outpu... | Command introduced in Junos OS Release 12.3X52. | [
"Configuring an RFC 2544-Based Benchmarking Test",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers"
] | |
show services rpm rfc2544-benchmarking | show services rpm rfc2544-benchmarking
<aborted-tests (test-id [test-id] | brief | detail)>
<active-tests (test-id [test-id] | brief | detail)>
<completed-tests (test-id [test-id] | brief | detail)>
<summary> | Display information about the results of each category or state of the RFC 2544-based benchmarking
test, such as terminated tests, active tests, and completed tests, for each real-time performance
monitoring (RPM) instance. You can view the results of each test state for all of the configured test IDs
or for a specific... | [
{
"name": "none",
"desc": "Display test results for all categories."
},
{
"name": "aborted-tests",
"desc": "(Optional) Display the list of tests that were terminated or stopped. This list includes tests that failed due to various error conditions and tests that you terminated by entering the tes... | view
Output Fields
Table 1564 on page 26948 lists the output fields for the show services rpm rfc2544-benchmarking command.
Output fields are listed in the approximate order in which they appear.
Table 1564: show services rpm rfc2544-benchmarking Output Fields
Field Name
Field Description
Test information
Details of th... | Command introduced in Junos OS Release 12.3X52. | [
"Configuring an RFC 2544-Based Benchmarking Test",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers"
] | |
show services rpm twamp client connection | show services rpm twamp client connection
<connection-name> | Display information about the connections established between the real-time performance monitoring
(RPM) Two-Way Active Measurement Protocol (TWAMP) server and control-clients. By default, all
established sessions are displayed, unless you specify a control-connection name when you issue the
command. Because TWAMP ligh... | [
{
"name": "none",
"desc": "Display information about all TWAMP client connection sessions."
},
{
"name": "connection-name",
"desc": "(Optional) Display information about the specified control-connection or TWAMP control-client."
}
] | view
Output Fields
Table 1565 on page 26957 lists the output fields for the show services rpm twamp client connection
command. Output fields are listed in the approximate order in which they appear.
Table 1565: show services rpm twamp client connection Output Fields
Field Name
Field Description
Connection Name
Connect... | Command introduced in Junos OS Release 15.1. | [] | |
show services rpm twamp client history-results | show services rpm twamp client history-results
<brief | detail>
<control-connection control-connection-name>
<since time>
<test-session test-session-name> | Display standard information about the results of the last 50 probes for each real-time performance
monitoring (RPM) Two-Way Active Measurement Protocol (TWAMP) instance. You can also view the
historical results of the probes or test packets sent from a TWAMP client to a TWAMP server for a
particular control-connection... | [
{
"name": "none",
"desc": "Display the results of the last 50 probes for all RPM TWAMP instances."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Default: brief"
},
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-con... | view
Output Fields
Table 1566 on page 26959 lists the output fields for the show services rpm twamp client history-results
command. Output fields are listed in the approximate order in which they appear.
Table 1566: show services rpm twamp client history-results Output Fields
Field Name
Field Description
Level of Outpu... | Command introduced in Junos OS Release 15.1. | [] | |
show services rpm twamp client probe-results | show services rpm twamp client probe-results
<control-connection control-connection-name>
<test-session test-session-name> | Display the results of the most recent real-time performance monitoring (RPM) Two-Way Active
Measurement Protocol (TWAMP) probes sent from the TWAMP client to the TWAMP server. You can
also view the results of the probes or test packets sent from a TWAMP client to a TWAMP server for a
particular control-connection, or ... | [
{
"name": "none",
"desc": "Display all results of the most recent TWAMP probes."
},
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-connection-name",
"desc": "(Optional) Display information for the specified control-connection between a TWAMP client and a TWAMP serve... | view
Output Fields
Table 1567 on page 26964 lists the output fields for the show services twamp client probe-results command.
Output fields are listed in the approximate order in which they appear.
Table 1567: show services twamp client probe-results Output Fields
Field Name
Field Description
Owner
Name of the session... | Command introduced in Junos OS Release 15.1.
Local-link field added in Junos OS Release 21.4R1. | [] | |
show services rpm twamp client session | show services rpm twamp client session
<control-connection control-connection-name>
<test-session test-session-name> | Display information about the sessions established between the real-time performance monitoring
(RPM) Two-Way Active Measurement Protocol (TWAMP) server and control clients for control packets
and data packets. By default, all established control-connection and data-connection or test sessions are
displayed, unless you... | [
{
"name": "none",
"desc": "Display information about all established connections and sessions."
},
{
"name": "control-connection",
"desc": ""
},
{
"name": "control-connection-name",
"desc": "(Optional) Display information about the specified control-connection, which is established f... | view
Output Fields
Table 1568 on page 26975 lists the output fields for the show services rpm twamp client session command.
Output fields are listed in the approximate order in which they appear.
Table 1568: show services rpm twamp client session Output Fields
Field Name
Field Description
Connection Name
Name of the c... | Command introduced in Junos OS Release 15.1. | [] | |
show services rpm twamp server connection | show services rpm twamp server connection
<connection-id> | Display information about the connections established between the real-time performance monitoring
(RPM) Two-Way Active Measurement Protocol (TWAMP) server and control-clients. By default, all
established sessions are displayed, unless you specify a session ID when you issue the command.
Because TWAMP light servers are... | [
{
"name": "none",
"desc": "Display connection information about all established sessions."
},
{
"name": "connection-id",
"desc": "(Optional) Identifier of the connection that you want to display information about."
}
] | view
Output Fields
Table 1569 on page 26977 lists the output fields for the show services rpm twamp server connection
command. Output fields are listed in the approximate order in which they appear.
Table 1569: show services rpm twamp server connection Output Fields
Field Name
Field Description
Connection ID
Connection... | Command introduced in Junos OS Release 9.3. | [] | |
show services rpm twamp server session | show services rpm twamp server session
<session-id> | Display information about the sessions established between the real-time performance monitoring
(RPM) Two-Way Active Measurement Protocol (TWAMP) server and control clients. By default, all
established sessions are displayed, unless you specify a session ID when you issue the command. | [
{
"name": "none",
"desc": "Display information about all established sessions."
},
{
"name": "session-id",
"desc": "(Optional) Identifier of the session that you want to display information about."
}
] | view
Output Fields
Table 1570 on page 26980 lists the output fields for the show services rpm twamp server session command.
Output fields are listed in the approximate order in which they appear.
Table 1570: show services rpm twamp server session Output Fields
Field Name
Field Description
Session ID
Session ID that un... | Command introduced in Junos OS Release 9.3. | [] | |
show services screen ids-option | show services screen ids-option <ids-rules>
screen-name | Display the configuration information about the specified services screen. You can configure a ids-option
to enable screen protection on the MX Series devices. | [] | view
Output Fields
Table 1571 on page 26982 lists the output fields for the show services screen ids-option command. Output
fields are listed in the approximate order in which they appear.
Table 1571: show services screen ids-option Output Fields
Field Name
Field Description
IP block fragment
Number of IP block fragme... | Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480
and MX960 with the MX-SPC3 services card. | [] | |
show services screen-statistics service-set | show services screen statistics service-set service-set | Display intrusion detection service (IDS) screen statistics. | [] | view
Output Fields
Table 1572 on page 26985 lists the output fields for the show services screen statistics service-set
command. Output fields are listed in the approximate order in which they appear.
Table 1572: show services screen statistics service-set Output Fields
Field Name
Field Description
ICMP flood
Internet ... | Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480
and MX960 with the MX-SPC3 services card. | [
"Example: Configuring Multiple Screening Options"
] | |
show services security-intelligence category summary | show services security-intelligence category summary category-name | Description of the Security Intelligence category
Update interval
Amount of time after which Policy Enforcer sends an update for the feed.
TTL
Length of time (in minutes) the file remains open, receiving statistics before it is closed,
transferred, and rotated. When either the time or the file size is exceeded, the fil... | [
{
"name": "node1:",
"desc": "--------------------------------------------------------------------------Category name :CC Status :Enable Description :Command and Control data schema Update interval :1800s"
},
{
"name": "TTL :3456000s",
"desc": "Feed name :cc_ip_... | View
Output Fields
Table 1573 on page 26993 lists the output fields for the show services security-intelligence category summary
command. Output fields are listed in the approximate order in which they appear.
Table 1573: show services security-intelligence category summary Output Fields
Field Name
Field Description
C... | Statement introduced before Junos OS Release 18.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240,
MX480, and MX960 with the MX-SPC3 services card.
Support for threat feed status (enabled, disabled, or user disabled) is added in Junos OS Release 20.1R1. | [] | |
show services security-intelligence dns-statistics | show services security-intelligence dns-statistics
show services security-intelligence dns-statistics logical-system all
show services security-intelligence dns-statistics tenant all | Displays the DNS profile statistics. | [] | View
Sample Output
show services security-intelligence dns-statistics
user@host> show services security-intelligence dns-statistics
Logical system: root-logical-system
Category Whitelist:
UDP Counter:
Requests Permit
0 0
TCP Counter:
Request Permit
0 0
TLS TCP Counter:
Reque... | Statement introduced in Junos OS Release 20.4R1. | [] | |
show services security-intelligence update status | show services security-intelligence update status | Display the status of the connection with Policy Enforcer. | [] | View
Sample Output
show services security-intelligence update status
user@host> show services security-intelligence update status
node1:
--------------------------------------------------------------------------
Current action :Start downloading the latest manifest.
Last update status :Download manifest fail... | Statement introduced before Junos OS Release 18.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240,
MX480, and MX960 with the MX-SPC3 services card. | [] | |
show services security-intelligence | show services security-intelligence sec-profiling-feed status
show services security-intelligence category detail feed-name custom_userid_data start
start_number count total_number category-name SecProfiling | Displays the status of security profiling feeds. | [] | View
Sample Output
show services security-intelligence sec-profiling-feed status
user@host> show services security-intelligence sec-profiling-feed status
Category SecProfiling
feed-name1
Feed type : IP
Last post time : 2019-08-13 22:47:09 PDT
Last post ret code: 200
Last post status : succeed... | Statement introduced before Junos OS Release 21.1.
show services security-intelligence category detail command added in Junos OS Release 21.1. | [] | |
show services security-metadata-streaming | show services security-metadata-streaming dns statistics
show services security-metadata-streaming dns statistics logical-system <logical-system-name>
show services security-metadata-streaming dns statistics logical-system all
show services security-metadata-streaming dns statistics tenant <tenant-name>
show services s... | The show services security-metadata-streaming http statistics command displays the statistics of security
metadata streaming sessions for HTTP protocol.
The show services security-metadata-streaming http whitelist command displays the allowlist servers that are
configured by the user for HTTP protocol.
The show service... | [] | view
Output Fields
Table 1574 on page 27004 lists the output fields for the show services security-metadata-streaming http
statistics command. Output fields are listed in the approximate order in which they appear.
Table 1574: show services security-metadata-streaming http statistics Output Fields
Field Name
Field Desc... | Command introduced in Junos OS Release 20.2R1. | [
"Juniper Advanced Threat Prevention Cloud Policy Overview"
] | |
show services service-redirect statistic | show services service-redirect statistic | Display the Service Redirect statistic. | [] | view
Sample Output
show services service-redirect statistic
user@host> show services service-redirect statistic
ICAP Redirect statistic:
Message Redirected : 4
Message REQMOD Redirected : 2
Message RESPMOD Redirected : 2
Message Received : 4
... | Command introduced in Junos OS Release 18.1R1.
logical-system option is introduced in Junos OS Release 18.3R1. | [] | |
show services service-set statistics ids drops | show services service-set statistics ids drops
<interface interface-name>
<service-set service-set-name> | Display statistics for packet drops resulting from header-integrity, suspicious packet pattern, and
session-limit checks performed by an MS-MPC or MS-MIC. | [
{
"name": "none",
"desc": "Display statistics for all configured service interfaces and service sets."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display statistics for the specified services interface."
},
{
"name": "service-set service-set-name",
"desc": "(Optiona... | view
Output Fields
Table 1576 on page 27011 lists the output fields for the show services service-set integrity-drops
command. Output fields are listed in the approximate order in which they appear.
Table 1576: show services service-set statistics ids drops Output Fields
Field Name
Field Description
Interface
Name of a... | Command introduced in Junos OS Release 17.1. | [
"Configuring Protection Against Network Attacks on an MS-MPC"
] | |
show services service-sets cpu-usage | show services service-sets cpu-usage
<interface interface-name>
<service-set service-set-name> | Display service set CPU usage as a percentage. The command is supported only on Adaptive Services
PICs (SP PICs). | [
{
"name": "none",
"desc": "Display CPU usage for all adaptive services interfaces and service sets."
},
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "(Optional) Display CPU usage for a particular interface. On M Series and T Series routers, the interface-n... | view
Output Fields
Table 1577 on page 27020 lists the output fields for the show services service-sets cpu-usage command.
Output fields are listed in the approximate order in which they appear.
Table 1577: show services service-sets cpu-usage Output Fields
Field Name
Field Description
Interface
Name of an adaptive serv... | Command introduced before Junos OS Release 7.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480
and MX960 with the MX-SPC3 services card. | [] | |
show services service-sets memory-usage | show services service-sets memory-usage
<interface interface-name>
<service-set service-set-name>
<zone> | Display service set memory usage. | [
{
"name": "none",
"desc": "Display service set memory usage."
},
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "(Optional) Display memory usage for a particular interface. On M Series and T Series routers, the interface-name can be sp-fpc/pic/port, or rspnu... | view
Output Fields
Table 1578 on page 27023 lists the output fields for the show services service-sets memory-usage command.
Output fields are listed in the approximate order in which they appear.
Table 1578: show services service-sets memory-usage Output Fields
Field Name
Field Description
Interface
Name of an adaptiv... | Command introduced before Junos OS Release 7.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480
and MX960 with the MX-SPC3 services card. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.