command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show spanning-tree statistics message-queues | show spanning-tree statistics message-queues | Display the STP message queues-related statistics. | [] | view
Output Fields
Table 1673 on page 27551 describes the output fields for the show spanning-tree statistics message-
queues command. Output fields are listed in the approximate order in which they appear.
Table 1673: show spanning-tree statistics message-queues Output Fields
Field Name
Field Description
Queue
PPMD na... | Command introduced in Junos OS Release 14.1. | [] | |
show spanning-tree statistics | show spanning-tree statistics
interface interface-name
vlan vlan-id
<brief | detail> | Display STP statistics. | [
{
"name": "none",
"desc": "Display brief STP statistics."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interface-name",
"desc": "(Optional) Display STP statistics for the specified interface."
},
{
"name": ... | view
Output Fields
Table 1674 on page 27554 lists the output fields for the show spanning-tree statistics command. Output
fields are listed in the approximate order in which they appear.
Table 1674: show spanning-tree statistics Output Fields
Field Name
Field Description
Message type
Type of message being counted.
BPD... | Command introduced in Junos OS Release 8.4. | [] | |
show spanning-tree stp-buffer see-all | show spanning-tree stp-buffer see-all
<stp-instance stp-instance-id routing-instance instance-name>
<vlan vlan-id routing-instance instance-name> | Display the configured STP (RSTP, MSTP, VSTP) interface parameters. | [
{
"name": "none",
"desc": "Display STP (RSTP, MSTP, VSTP) interface role/state changes that are logged into internal memory called the buffer. Entries in the buffer depend on the user configuration."
},
{
"name": "stp-instance stp-instance-id",
"desc": ""
},
{
"name": "routing-instance i... | view
Output Fields
Table 1675 on page 27556 describes the output fields for the show spanning-tree stp-buffer see-all
command. Output fields are listed in the approximate order in which they appear.
Table 1675: show spanning-tree stp-buffer see-all Output Fields
Field Name
Field Description
Level of Output
Global Event... | Command introduced in Junos OS Release 14.1. | [] | |
show spring-traffic-engineering performance-measurement | show spring-traffic-engineering performance-measurement
<logical-system>
<tunnel-source>
<regex regex>
<state>
<sr-mpls | srv6>
<changed-in-last>
<avg-delay-greater-than | avg-delay-less-than | avg-delay-equal-to>
<max-delay-greater-than | max-delay-less-than | max-delay-equal-to>
<min-delay-greater-than | min-delay-le... | Show performance measurement info for spring traffic engineered LSPs | [
{
"name": "logical-system",
"desc": "Name of logical system, or 'all'"
},
{
"name": "tunnel-source",
"desc": "Source of tunnel creation"
},
{
"name": "bgp",
"desc": "BGP SRTE"
},
{
"name": "dtm",
"desc": "Dynamic tunnel module"
},
{
"name": "pcep",
"desc": "Pa... | view
Output Fields
"Table 1" on page 27562 describes the output fields for the show spring-traffic-engineering performance-
measurement command. Output fields are listed in the approximate order in which they appear.
Table 1676: show spring-traffic-engineering performance-measurement Output Fields
Field Name
Field Desc... | Command introduced in Junos OS Evolved Release 24.4R1. | [] | |
show spring-traffic-engineering performance-measurement-session | show spring-traffic-engineering performance-measurement-session
<logical-system>
<session-id> | Show spring traffic engineering performance measurement sessions | [
{
"name": "logical-system",
"desc": "Name of logical system, or 'all'."
},
{
"name": "session-id",
"desc": "Show entry matching with session id."
}
] | view
Output Fields
"Table 1" on page 27568 describes the output fields for the show spring-traffic-engineering performance-
measurement command. Output fields are listed in the approximate order in which they appear.
Table 1677: show spring-traffic-engineering performance-measurement SessionOutput Fields
Field Name
Fie... | Command introduced in Junos OS Evolved Release 24.4R1. | [] | |
show spring-traffic-engineering | show spring-traffic-engineering (lsp | overview | route | sbfd)
<brief | detail>
<color>
<destination>
<logical-system (all | logical-system-name)>
<name lsp-name> | Display ingress details of SPRING traffic engineering. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specific level of output."
},
{
"name": "lsp",
"desc": "Display details of SPRING traffic-engineered LSPs on the ingress router or the Path Computation Client (PCC)."
},
{
"name": "route",
"desc": "Display the spring traffic... | view
Output Fields
Table 1678 on page 27574 describes the output fields for the show spring-traffic-engineering command.
Output fields are listed in the approximate order in which they appear.
Table 1678: show spring-traffic-engineering Output Fields
Field Name
Field Description
To
IP address of the SR-TE LSP destinati... | Command introduced in Junos OS Release 17.2.
sbfd option introduced in Junos OS Release 19.4R1 on all platforms.
color and destination options introduced in Junos OS 21.2R1.
srv6-binding-sid database option added in Junos OS Evolved Release 25.2R1. | [
"Enable Segment Routing for the Path Computation Element Protocol"
] | |
show srv6 local-sids | show srv6 local-sids | Shows a list of local segment identifiers (SIDs) from the Segment Routing IPv6 (SRV6) manager, allocated
by different protocols or applications. | [] | view
Output Fields
Table 1679: show srv6 local-sids Output Fields
Output Field
Field Description
SID
SRv6 segment identifier
SID-Owner
Name of the protocol allocating this SID
SID-Type
•
STATIC: SID is statically configured using CLI
•
DYNAMIC: SID is dynamically allocated by SRv6 manager
Locator
SRv6 locator from wher... | Statement introduced in Junos OS Release 25.1R1. | [] | |
show ssl-certificates | show ssl certificates | Display information about the Secure Sockets Layer (SSL) certificates installed on the switch. When you
configure PEAP as the authentication protocol for MAC RADIUS authentication, you must load the
server-side Secure Sockets Layer (SSL) certificate on the switch. PEAP requires an SSL certificate to
create a secure TLS... | [
{
"name": "none",
"desc": "Display information about all SSL certificates."
},
{
"name": "detail",
"desc": "Display information about SSL certificates for the specified level of output."
}
] | view
Output Fields
Table 1680 on page 27592 lists the output fields for the show ssl-certificates command. Output fields are
listed in the approximate order in which they appear.
Table 1680: show ssl-certificates Output Fields
Field Name
Field Description
Level of Output
Issuer
Authority that issued the digital certif... | Command introduced in Junos OS Release 17.2R1. | [
"Configuring PEAP for MAC RADIUS Authentication"
] | |
show static-subscribers sessions | show static-subscribers sessions
<group group-name>
<interface interface-name> | Display information about the subscriber sessions for all static subscribers, all static subscribers on an
interface group, or a single subscriber on an interface. | [
{
"name": "group-name",
"desc": "(Optional) Display session information for static subscribers on all interfaces in the specified group."
},
{
"name": "interface-name",
"desc": "(Optional) Display session information for the static subscriber on the specified in the specified group."
}
] | view
Output Fields
Table 1681 on page 27595 lists the output fields for the show static-subscribers sessions command.
Output fields are listed in the approximate order in which they appear.
Table 1681: show static-subscribers sessions Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the int... | Command introduced in Junos OS Release 9.6. | [
"JSRC and Subscribers on Static Interfaces"
] | |
show subscribers class-of-service | show subscribers class-of-service
<classifier>
<interface>
<rewrite-rule>
<scheduler-map>
<traffic-control-profile> | Show subscribers class-of-service (CoS) settings | [
{
"name": "classifier",
"desc": "Show mapping of code point to forwarding class/loss priority"
},
{
"name": "interface",
"desc": "Show mapping of CoS objects to interfaces"
},
{
"name": "rewrite-rule",
"desc": "Show mapping of forwarding class/loss priority to code point"
},
{
... | view | Statement introduced in Junos OS Evolved Release 25.4R1. | [] | |
show subscribers firewall | show subscribers firewall
<terse>
<detail> | Show subscribers firewall information | [
{
"name": "terse",
"desc": "Show filter names only"
},
{
"name": "detail",
"desc": "Show filter statistics with enhanced policer statistics"
}
] | view | Statement introduced in Junos OS Evolved Release 25.4R1. | [] | |
show subscribers interfaces | show subscribers interfaces
<physical-interface-name>
<logical <interface-name>>
<queue <interface-name | forwarding-class>> | Show interfaces information | [
{
"name": "physical-interface-name",
"desc": "Name of the physical interface"
},
{
"name": "logical",
"desc": "Show logical interface information"
},
{
"name": "queue",
"desc": "Show queue statistics for this interface"
},
{
"name": "forwarding-class",
"desc": "Name of fo... | view | Statement introduced in Junos OS Evolved Release 25.4R1. | [] | |
show subscribers summary | show subscribers summary
<all>
<detail | extensive | terse>
<count>
<physical-interface physical-interface-name>
<logical-system logical-system pic | port | routing-instance routing-instance | slot>
<sub-system (agf | bng)> | Display summary information for subscribers. | [
{
"name": "none",
"desc": "Display summary information by state and client type for all subscribers."
},
{
"name": "all",
"desc": "(Optional) Display summary information by state, client type, and logical system and routing instance (LS:RI)."
},
{
"name": "detail | extensive",
"desc"... | view
Output Fields
Table 1682 on page 27603 lists the output fields for the show subscribers summary command. Output fields
are listed in the approximate order in which they appear.
Table 1682: show subscribers summary Output Fields
Field Name
Field Description
Level of Output
Subscribers by State
Number of subscribers... | Command introduced in Junos OS Release 10.2.
sub-system added in Junos OS Release 22.3R1. | [] | |
show subscribers | show <user-plane> subscribers
<detail | extensive | terse>
<aci-interface-set-name aci-interface-set-name>
<address address>
<agent-circuit-identifier agent-circuit-identifier>
<agent-remote-identifier agent-remote-identifier>
<aggregation-interface-set-name interface-set-name>
<class-of-service (classifier | interfac... | Display information for active subscribers on both the broadband network gateway (BNG) and Access
Gateway Function (AGF) subsystems. When you have subscribers logged in to both the BNG and the
AGF, you can use the sub-system option to view the outputs specific to either subsytem.
See "Sample Output for AGF" on page 276... | [
{
"name": "DHCPV6 Header",
"desc": "len = number of hex values in the message. The hex values specify the type, length, value (TLV) for the DHCPv6 options. Effective shaping-rate Actual downstream traffic shaping rate for the subscriber in kilobits per second."
},
{
"name": "IPv4 Input Service",
... | view
Output Fields
Table 1684 on page 27617 lists the output fields for the show subscribers command. Output fields are
listed in the approximate order in which they appear.
Table 1684: show subscribers Output Fields
Field Name
Field Description
Interface
Interface associated with the subscriber. The router or the swi... | Command introduced in Junos OS Release 9.3.
client-type, mac-address, subscriber-state, and extensive options introduced in Junos OS Release 10.2.
count option usage with other options introduced in Junos OS Release 10.2.
Options aci-interface-set-name and agent-circuit-identifier introduced in Junos OS Release 12.2.
T... | [
"Verifying and Managing Agent Circuit Identifier-Based Dynamic VLAN Configuration",
"Verifying and Managing Configurations for Dynamic VLANs Based on Access-Line Identifiers",
"Verifying and Managing Junos OS Enhanced Subscriber Management"
] | |
show synchronous-ethernet esmc statistics | show synchronous-ethernet esmc statistics
<brief interface interface-name>
<detail interface interface-name>
< interface interface-name>
< interface interface-name (brief | detail)> | (MX5, MX10, MX40, MX80, MX80-T, MX240, MX480, MX960, MX2010, MX2020 , and PTX Series
routers only) Display the Synchronous Ethernet ESMC statistics. | [] | maintenance
Output Fields
Table 1685 on page 27678 lists the output fields for theshow synchronous-ethernet esmc statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1685: show synchronous-ethernet esmc statistics Output Fields
Field Name
Field Description
Interface Name
int... | Command introduced in Junos OS Release 11.2R4.
Command introduced in Junos OS Release 14.2R1 for PTX Series Packet Transport Routers. | [
"Synchronous Ethernet Overview",
"Configuring an External Clock Synchronization Interface for MX Series Routers"
] | |
show synchronous-ethernet esmc transmit | show synchronous-ethernet esmc transmit
<brief interface interface-name>
<detail interface interface-name>
< interface interface-name>
< interface interface-name (brief | detail)> | (MX5, MX10, MX40, MX80, MX80-T, MX240, MX480, MX960, MX2010, MX2020, and PTX Series
routers only) Display the Synchronous Ethernet ESMC transmit interface details. | [] | maintenance
Output Fields
Table 1686 on page 27681 lists the output fields for the show synchronous-ethernet esmc transmit detail
command. Output fields are listed in the approximate order in which they appear.
Table 1686: show synchronous-ethernet esmc transmit detail Output Fields
Field Name
Field Description
Interfa... | Command introduced in Junos OS Release 11.2R4.
Command introduced in Junos OS Release 14.2R1 for PTX Series Routers. | [
"Synchronous Ethernet Overview",
"Configuring an External Clock Synchronization Interface for MX Series Routers"
] | |
show synchronous-ethernet global-information | show synchronous-ethernet global-information
<brief> | (MX5, MX10, MX40, MX80, MX80-T, MX240, MX480, MX960, and PTX routers only) Display
information about the global configuration for Synchronous Ethernet chassis synchronization. | [] | maintenance
Output Fields
Table 1687 on page 27684 lists the output fields for the show synchronous-ethernet global-information
command. Output fields are listed in the approximate order in which they appear.
Table 1687: show synchronous-ethernet global-information Output Fields
Field Name
Field Description
Network op... | Command introduced in Junos OS Release 11.2R4. | [
"Synchronous Ethernet Overview",
"Configuring an External Clock Synchronization Interface for MX Series Routers"
] | |
show system alarms reference | show system alarms reference detail
<fru fru-type slot slot-number > | Show a list of active system-supported alarms, including those for FRUs. If you use the command with
detail after reference, the output displays remedy information. If you include the optional string that
begins with fru, the output displays information just for the specified FRU.
Use the detail version of the command ... | [
{
"name": "detail",
"desc": "Obtain remedy information for active system-supported alarms."
},
{
"name": "fru fru-type slot slot-number",
"desc": ""
},
{
"name": "(Optional) Specify a FRU type",
"desc": "such as fpc, cb, or psm—and the number for the"
}
] | view
Output Fields
Table 1688 on page 27687 lists the output fields for the show system alarms reference command. Output
fields are listed in the approximate order in which they appear.
Table 1688: show system alarms reference Output Fields
Field Name
Field Description
Level of Output
Alarm reference details
Heading pr... | Command introduced in Junos OS Evolved Release 25.2R1. | [] | |
show system alarms | show system alarms | Display active system alarms. | [] | admin
Sample Output
show system alarms
user@host> show system alarms
5 alarms currently active
Alarm time Class Description
2012-05-29 16:47:18 UTC Major /var partition usage crossed critical threshold
2012-05-29 16:47:18 UTC Minor /var partition usage crossed high threshold
2012-05-29 ... | Command introduced in Junos OS Release 11.1. | [] | |
show system alarms | show system alarms | Information about the alarm.
Sample Output
show system alarms
user@host> show system alarms
2 alarms currently active
Alarm time Class Description
2005-02-24 17:29:34 UTC Minor IPsec VPN tunneling usage requires a license
2005-02-24 17:29:34 UTC Minor Rescue conf... | [
{
"name": "are met:",
"desc": "The active Packet Forwarding Engine destinations are reachable on one or no active switching planes. At least one of the inactive switching planes has a fault that causes the destination Packet Forwarding Engine to become unreachable. NOTE: On Junos OS Evolved, the show syste... | view
Output Fields
Table 1689 on page 27721 lists the output fields for the show system alarms command. Output fields are
listed in the approximate order in which they appear.
Table 1689: show system alarms Output Fields
Field Name
Field Description
Alarm time
Date and time the alarm was first recorded.
Class
Severity ... | Command introduced before Junos OS Release 7.4. | [] | |
show system anomalies (GNF) | show system anomalies (all-anomalies | config | fru | system) | Display the incompatibilities between the software version running on the guest network function
(GNF) and the version running on the base system (BSYS). | [
{
"name": "all-anomalies",
"desc": ""
},
{
"name": "Display the multiversion software incompatibilities from all categories",
"desc": "system,"
},
{
"name": "config",
"desc": "Display the feature incompatibilities between software versions."
},
{
"name": "fru",
"desc": "D... | View
Output Fields
Table 1690 on page 27727 lists the output fields for the show system anomalies command. Output fields are
listed in the approximate order in which they appear.
Table 1690: show system anomalies gnf-id Output Fields
Field Name
Field Description
Anomaly Type
Shows the software incompatibility type. Th... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system anomalies gnf-id | show system anomalies gnf-id id (all-anomalies | config | fru | system) | Display incompatibilities between the software version running on the base system (BSYS) and the
software running on a specific guest network function (GNF). | [
{
"name": "gnf-id id",
"desc": "Specify the GNF ID for which you want to view the software incompatibilities."
},
{
"name": "all-anomalies",
"desc": ""
},
{
"name": "Display the multiversion software incompatibilities from all categories",
"desc": "system,"
},
{
"name": "conf... | View
Output Fields
Table 1691 on page 27729 lists the output fields for the show system anomalies gnf-id command. Output
fields are listed in the approximate order in which they appear.
Table 1691: show system anomalies gnf-id Output Fields
Field Name
Field Description
Anomaly Type
Shows the software incompatibility ty... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system applications (Junos OS Evolved) | show system applications
<app app-name>
<brief>
<detail>
<error>
<node node-name> | Text describing the error.
error detail, either with or
without the app or node
options
Error Module
The module causing the error.
error detail, either with or
without the app or node
options
Error Object
Name
Name of the object causing the error.
error detail, either with or
without the app or node
options
Error Objec... | [
{
"name": "app app-name",
"desc": "(Optional) Specify application name for which you want to display application summary information."
},
{
"name": "brief",
"desc": "(Optional) Display brief output. This is the default format of display."
},
{
"name": "detail",
"desc": "(Optional) Di... | view
Output Fields
For a description of the output fields, see Table 1692 on page 27734. Output fields are listed in the
approximate order in which they appear.
Table 1692: show system applications Output Fields
Field Name | Command introduced in Junos OS Evolved Release 18.3R1.
error option added in Junos OS Evolved Release 22.3R1. | [] | |
show system audit | show system audit
<root-only> | Display the state and checksum values for file systems. | [
{
"name": "none",
"desc": "Display the state and checksum values for all file systems."
},
{
"name": "all-chassis",
"desc": "(TX Matrix routers and TX Matrix Plus routers only) (Optional) Display file system MD5 hash and permissions information for all of the chassis."
},
{
"name": "all-... | admin
Sample Output
show system audit root-only
user@host> show system audit root-only
# user: root
# machine: host
# tree: /
date: Fri Feb 11 21:21:46 2000
# .
/set type=file uid=0 gid=0 mode=0755 nlink=1
. type=dir nlink=23 size=1024 time=950252640.0
.cshrc uid=3 gid=7 m... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [] | |
show system auto-snapshot | show system auto-snapshot | This command displays automatic snapshot status information. | [] | view
Output Fields
Table 1693 on page 27759 describes the output fields for the show system auto-snapshot command. Output
fields are listed in the approximate order in which they appear.
Table 1693: show system auto-snapshot status Output Fields
Field Name
Field Description
Auto-snapshot
configuration
Status of the co... | Command introduced in Junos OS Release 12.3. | [
"Configuring Dual-Root Partitions"
] | |
show system autoinstallation status | show system autoinstallation status | This command displays autoinstallation status information (ACX Series routers, and EX Series switches
only). | [] | view
Output Fields
Table 1694 on page 27761 describes the output fields for the show system autoinstallation status
command. Output fields are listed in the approximate order in which they appear.
Table 1694: show system autoinstallation status Output Fields
Field Name
Field Description
Autoinstallation
status
Display... | Command introduced before Junos OS Release 7.4.
Command supported in Junos OS Release 12.2 for ACX Series Universal Metro Routers. | [
"ACX Series Autoinstallation Overview",
"Before You Begin Autoinstallation on an ACX Series Universal Metro Router",
"Autoinstallation Configuration of ACX Series Universal Metro Routers",
"USB Autoinstallation on ACX Series Routers",
"Verifying Autoinstallation on ACX Series Universal Metro Routers"
] | |
show system autorecovery state | show system autorecovery state | This command perform checks and show status of all autorecovered items.
In devices running FreeBSD Release 12 or later, you cannot back up data with the autorecovery feature.
Instead, back up data using snapshots. To learn if your device is running FreeBSD Release 12 or later,
issue the show version command and look fo... | [] | view
Output Fields
Table 1695 on page 27763 lists the output fields for the show system autorecovery state command. Output
fields are listed in the approximate order in which they appear.
Table 1695: show system autorecovery state Output Fields
Field Name
Field Description
File
The name of the file on which autorecover... | Command introduced in Junos OS Release 15.1X49-D35. | [] | |
show system boot console | show system boot-console | Displays boot console information. | [] | view
Sample Output
show system boot-console
user@host> show system boot-console
fpc0:
--------------------------------------------------------------------------
Boot console for current boot was Console port
Boot console for next boot is Auxiliary port | Command introduced in Junos OS Release 21.3R1. | [] | |
show system boot-messages | show system boot-messages
infrastructure name | interconnect-device name | node-group name | This command displays initial messages generated by the system kernel upon startup. These messages
are the contents of /var/run/dmesg.boot. | [
{
"name": "none",
"desc": "Display all boot time messages."
},
{
"name": "all-chassis",
"desc": "(TX Matrix routers and TX Matrix Plus routers only) (Optional) Display boot time messages for all of the chassis."
},
{
"name": "all-lcc",
"desc": "(TX Matrix routers and TX Matrix Plus r... | view
Sample Output
show system boot-messages (TX Matrix Router)
user@host> show system boot-messages
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1996-2000 Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All ... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system buffers | show system buffers
<infrastructure name | interconnect-device name | node-group name | root-only (infrastructure
name | interconnect-device name | node-group name)> | Display information about the buffer pool that the Routing Engine uses for local traffic. Local traffic is
the routing and management traffic that is exchanged between the Routing Engine and the Packet
Forwarding Engine within the router or switch, as well as the routing and management traffic from IP
(that is, from OS... | [
{
"name": "none",
"desc": "Show all buffer statistics."
},
{
"name": "all-lcc",
"desc": "(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, show buffer statistics for all T640 routers connected to the TX Matrix router. On a TX Matrix Plus router, show buffer st... | view
Output Fields
Table 1696 on page 27781 describes the output fields for the show system buffers command. Output fields
are listed in the approximate order in which they appear.
Table 1696: show system buffers Output Fields
Field Name
Field Description
mbufs in use
Memory buffers (mbufs) are 128-byte buffers that ar... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system certificate | show system certificate
<certificate-id> | (Encryption interface on M Series, T Series routers, QFX Series, and OCX Series switches only) Display
installed certificates signed by the Juniper Networks certificate authority. | [
{
"name": "none",
"desc": "Display all installed certificates signed by the Juniper Networks certificate authority."
},
{
"name": "certificate-id",
"desc": "(Optional) Display the details of a particular certificate."
}
] | maintenance
Output Fields
Table 1697 on page 27789 lists the output fields for the show system certificate command. Output fields
are listed in the approximate order in which they appear.
Table 1697: show system certificate Output Fields
Field Name
Field Description
Certificate identifier
Unique identifier associated ... | Command introduced before Junos OS Release 7.4. | [] | |
show system commit server queue | show system commit server queue
<id commit-id>
<job-status (all| error| pending| success)>
<patch (none | id commit-id) | (job-status (all | error | pending | success)> | Display the status of commit server queue transactions.
NOTE: Only 50 successful commit jobs are stored in the database and displayed in the
output. When the fifty-first job is committed, the first job is deleted from the database
and is no longer displayed in the output. | [
{
"name": "id commit-id",
"desc": "(Optional) Display the batch commit operation status messages for a specific commit ID."
},
{
"name": "job-status",
"desc": "(Optional) Display batch commit operation status messages for the following"
},
{
"name": "batch commit statuses:",
"desc": ... | view
Sample Output
show system commit server queue
user@host> show system commit server queue
Pending commits:
none
Completed commits:
Id: 1000
Last Modified: Tue Nov 1 22:46:43 2011
Status: Successfully committed 1000
Id: 1002
Last Modified: Tue Nov 1 22:50:35 2011
Status: Successfully committed 1002
... | Command introduced in Junos OS Release 12.1. | [
"Example: Configuring Batch Commit Server Properties"
] | |
show system commit server status | show system commit server status | Display commit server status.
NOTE: By default, the status of the commit server is “Not running”. The commit server
starts running only when a commit job is added to the batch. | [] | view
Sample Output
show system commit server status (When Server Is Inactive)
user@host> show system commit server status
Commit server status : Not running
show system commit server status (When Server Is Active)
user@R0> show system commit server status
Commit server status : Running
Jobs in process:
1369 1370 13... | Command introduced in Junos OS Release 12.1. | [
"Example: Configuring Batch Commit Server Properties"
] | |
show system commit | show system commit
<revision | server | synchronize-server pending-jobs | include-configuration-revision> | Display the system commit history and pending commit operations. | [
{
"name": "none",
"desc": "Display the last 50 commit operations on the static configuration database, starting with the most recent."
},
{
"name": "revision",
"desc": "(Optional) Display the revision number of the active configuration of the Routing Engine(s)."
},
{
"name": "server",
... | view
Output Fields
Table 1698 on page 27799 describes the output fields for the show system commit command. Output fields
are listed in the approximate order in which they appear.
Table 1698: show system commit Output Fields
Field Name
Field Description
Level of
Output
<number>
Displays the last 50 commit operations li... | Command introduced before Junos OS Release 7.4.
Option server introduced in Junos OS Release 12.1 for the PTX Series router.
Option revision introduced in Junos OS Release 14.1.
Option synchronize-server introduced in Junos OS Release 17.2R1 and Junos OS Evolved Release 22.1R1.
Option include-configuration-revision int... | [
"show system commit revision"
] | |
show system configuration archival | show system configuration archival | Display directory and number of files queued for archival transfer.
NOTE: The [edit system configuration] hierarchy is not available on QFabric systems. | [] | maintenance
Sample Output
show system configuration archival
user@host> show system configuration archival
/var/transfer/config/:
total 8 | Introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0. | [] | |
show system configuration database status | show system configuration database status | Display the users currently editing the configuration. | [] | view
Output Fields
Table 1 describes the output fields for the show system configuration database status command. Output
fields are listed in the approximate order in which they appear.
Table 1699: show system configuration database status Output Fields
Field Name
Field Description
Level of Detail
User
Userid.
all
Ter... | Command introduced before Junos OS Release 23.3R1. | [
"Displaying Users Currently Editing the Configuration"
] | |
show system configuration database usage | show system configuration database usage
<ephemeral-instance (default | instance-name)>
<merge> | Display configuration database disk space usage statistics. | [
{
"name": "none",
"desc": "Display statistics for the static configuration database."
},
{
"name": "ephemeral-instance",
"desc": ""
},
{
"name": "(default | instance-name)",
"desc": "(Optional) Display statistics for the specified ephemeral configuration database instance."
},
{
... | maintenance
Output Fields
Table 1700 on page 27806 describes the output fields for the show system configuration database usage
command. Output fields are listed in the approximate order in which they appear.
Table 1700: show system configuration database usage Output Fields
Field Name
Field Description
Maximum size of... | Command introduced in Junos OS Release 15.1.
ephemeral-instance option introduced in Junos OS Release 23.2R1 and Junos OS Evolved Release 23.2R1.
merge option introduced in Junos OS Release 25.2R1 and Junos OS Evolved Release 25.2R1. | [
"Overview for Junos OS"
] | |
show system configuration rescue | show system configuration rescue | Display a rescue configuration, if one exists.
NOTE: The [edit system configuration] hierarchy is not available on QFabric systems. | [] | maintenance
Sample Output
show system configuration rescue
user@switch> show system configuration rescue
version "7.3"; groups {
global {
system {
host-name router1;
domain-name customer.net;
domain-search [ customer.net ];
backup-router 192.0.2.... | Command introduced before Junos OS Release 7.4. | [] | |
show system configuration revision | show system configuration revision revision-string
<compare revision-string revision-string2>
<rollback-number revision-string > | Display the configuration associated to the specified revision. | [
{
"name": "revision-string",
"desc": "Show the configuration associated with the specified revision identifier string. Use the \"show system commit include-configuration-revision\" on page 27797 command to view the revision identifier string for each revision."
},
{
"name": "compare revision-string ... | view
Sample Output
show system configuration revision
user@host> show system configuration revision re0-1604691570-294
## Last changed: 2020-11-06 11:39:28 PST
version 20.4I-20201012.0.0359;
groups {
re0 {
system {
host-name host;
backup-router 192.0.2.254 destination 0.0.0.0/0;
... | Command introduced in Junos OS Release 20.4R1 and Junos OS Evolved Release 20.4R1. | [] | |
show system connections | show system connections
<inet | inet6>
<node node-name> | Display information about the active IP sockets on the Routing Engine. Use this command to verify
which servers are active on a system and what connections are currently in progress. | [
{
"name": "none",
"desc": "Display information about all active IP sockets on the Routing Engine."
},
{
"name": "extensive",
"desc": "(Optional) Display exhaustive system process information, which, for TCP connections, includes the TCP control block and maximum segment size (MSS). This option i... | view
Output Fields
Table 1701 on page 27816 describes the output fields for the show system connections command. Output
fields are listed in the approximate order in which they appear.
Table 1701: show system connections Output Fields
Field Name
Field Description
Proto
Protocol of the socket: IP, TCP, or UDP for IPv4 o... | Command introduced before Junos OS Release 7.4.
Options extensive and show-routing-instance deprecated in Junos OS Evolved Release 17.3.
node option introduced in Junos OS Evolved Release 18.3R1. | [] | |
show system core dumps (Junos OS Evolved) | show system core-dumps
<node node-name> | Show core files on all routers or switches running Junos OS Evolved. You use this command to show a
list of system core files created when the device has failed, which can be useful for diagnostic purposes.
Each list item includes the file permissions, number of links, owner, group, size, modification date, and
path an... | [] | view
Output Fields
The command displays a list of core-dump files. If a node does not have any core-dump files, then the
command displays just the node name.
Sample Output
show system core-dumps (Dual-Routing Engine System, with Core Dump on only One
Routing Engine)
user@host> show system core-dumps
re0:
--------------... | [] | ||
show system core-dumps | show system core-dumps
<component (UUID | serial number | all)>
<display-period (hours | minutes | seconds)>
<display-order>
<kernel-crashinfo component (UUID | serial number)>
<repository (core | log)> | Show core files on all routers or switches running Junos OS. You can use the show system core-dumps
command to show a list of system core files created when the router or switch has failed. This command
can be useful for diagnostic purposes. Each list item includes the file permissions, number of links,
owner, group, s... | [
{
"name": "none",
"desc": "Display a list of all existing core-dump files. NOTE: If dual Routing Engines are present, then only the core-dump files for the active Routing Engine are listed. For Junos OS Evolved, core-dump files for all Routing Engines are listed."
},
{
"name": "all-chassis",
"de... | view
Output Fields
Table 1702 on page 27828 describes the output fields for the show system core-dumps command. Output
fields are listed in the approximate order in which they appear.
Table 1702: show system core-dumps Output Fields
Field Name
Field Description
Permissions
Read/write permissions for the file named.
Lin... | Command introduced before Junos OS Release 8.5.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
re0, re1, and routing-engine options introduced for dual Routing Engines in Junos OS Release 13.1.
satellite option introduced in Junos OS Release 14.2R3.
core-file-info option is deprecated in ... | [] | |
show system cpu (JDM) | show system cpu | Display the CPUs and their usage status. | [] | View
Output Fields
Table 1703 on page 27844 describes the output fields for the show system cpu command. Output fields are
listed in the approximate order in which they appear.
Table 1703: show system cpu Output Fields
Field Name
Field Description
VNF
Name of the GNF.
State
GNF status. For example, “Running”.
CPU-Id(s... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system data-models | show system data-models model xpath-cli-command-mapping xpath | Display information for the requested data model. | [
{
"name": "model",
"desc": "Specify the data model for the requested operation. Models include:"
},
{
"name": "genstate",
"desc": "YANG data models for operational state."
},
{
"name": "xpath-cli-command-mapping path",
"desc": "For genstate models, retrieve the operational mode comma... | view
Sample Output
show system data-models genstate xpath-cli-command-mapping
{master}
user@host> show system data-models genstate xpath-cli-command-mapping /genstate/system-
information/os-version
Genstate xpath to CLI command mapping information (sometimes multiple commands might be mapped):
> show system informatio... | Command introduced in Junos OS Evolved Release 24.2R1. | [
"Junos Genstate YANG Data Models"
] | |
show system directory-usage | show system directory-usage
<depth number>
<path>
<infrastructure name>
<interconnect-device name>
<node-group name> | Display directory usage information. | [
{
"name": "none",
"desc": "Display all directory usage information."
},
{
"name": "all-chassis",
"desc": "(TX Matrix routers and TX Matrix Plus routers only) (Optional) Display directory usage information about all the T640 routers (in a routing matrix based on a TX Matrix router). Display direc... | view
Output Fields
Table 1704 on page 27851 describes the output fields for the show system directory-usage command.
Output fields are listed in the approximate order in which they appear.
Table 1704: show system directory-usage Output Fields
Field Name
Field Description
bytes
Number of bytes used by files in a direct... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system download | show system download <download-id> | This command displays a brief summary of all the download instances along with their current state and
extent of progress. If a download-id is provided, the command displays a detailed report of the particular
download instance. | [
{
"name": "download-id",
"desc": "(Optional) The ID number of the download instance."
}
] | view
Output Fields
Table 1705 on page 27854 lists the output fields for the show system download command. Output fields are
listed in the approximate order in which they appear.
Table 1705: show system download Output Fields
Field Name
Field Description
ID
Displays the download identification number.
Status
Displays th... | Command introduced in Junos OS Release 15.1X49-D35. | [] | |
show system errors active | show system errors active
<detail [fru slot-number [scope error-scope] [category error-category]]>
<fru slot-number> | Description of the error.
State
State of the error. Values are: enabled or disabled.
Scope
Scope classification to which the error belongs. Values include board and pfe.
Table 1706: show system errors active Output Fields (Continued)
Field Name
Field Description
Category
Category subgroup under the scope level to whic... | [
{
"name": "none",
"desc": "Display a brief summary of the system error information for all applicable FRUs."
},
{
"name": "category error-category",
"desc": "(Optional) Display system error information based on error category. An error category categorizes errors into various subgroups under a s... | admin
Output Fields
Table 1706 on page 27857 list the output fields for the show system errors active command. Output fields
are listed in the approximate order in which they appear.
Table 1706: show system errors active Output Fields
Field Name
Field Description
Error Name
Name of error.
Identifier
Each error is uniqu... | Command introduced in Junos OS Release 18.2R1.
Command enhanced to include automatic temperature performance throttle and
"btchip_temp_monitor_pfe_throttled_bandwidth" option error display in Junos OS Release 21.4R1. | [] | |
show system errors count | show system errors count | Display information collected by the J-Insight fault monitoring feature. Specifically, display information
about the number of detected errors and recovery actions triggered based on error severity level. | [] | admin
Output Fields
Table 1707 on page 27864 lists the output fields for the show system errors count command. Output fields
are listed in the approximate order in which they appear.
Table 1707: show system errors count Output Fields
Field Name
Field Description
Level
Severity level of the error. Values are: Minor, Maj... | Command introduced in Junos OS Release 18.2R1. | [] | |
show system errors error-id | show system errors error-id error-id-uri | Description of the error.
Table 1708: show system errors error-id Output Fields (Continued)
Field Name
Field Description
State
State of the error. Values are: enabled or disabled.
Scope
Scope classification to which the error belongs. Values include board and pfe.
Category
Category subgroup under the scope level to wh... | [] | admin
Output Fields
Table 1708 on page 27866 lists the output fields for the show system errors error-id command. Output
fields are listed in the approximate order in which they appear.
Table 1708: show system errors error-id Output Fields
Field Name
Field Description
Error Name
Name of error.
Identifier
Each error is ... | Command introduced in Junos OS Release 19.1R1. | [] | |
show system errors fru | show system errors fru detail [fru slot-number] | Display information collected by the J-Insight fault monitoring feature. Specifically, display information
about detected errors based on the FRU. | [
{
"name": "none",
"desc": "Display a brief summary of the system error information for the FRU."
},
{
"name": "detail",
"desc": "(Optional) Display detailed system error information."
},
{
"name": "fru slot-number",
"desc": "(Optional) Display system error information for a specific ... | admin
Output Fields
Table 1709 on page 27870 lists the output fields for the show system errors fru command. Output fields
are listed in the approximate order in which they appear.
Table 1709: show system errors fru Output Fields
Field Name
Field Description
FRU
FRU identification number.
Scope
An error scope provides... | Command introduced in Junos OS Release 18.2R1.
Reset-pfe option added in Junos OS Release 21.4R1. | [] | |
show system errors history | show chassis errors history
<cb slot| ccg slot | fan slot | fpc slot | psm slot | re slot | sib slot> | Display information about cleared faults in the error history buffer. You can display history for all errors
or the errors for one system component. The error history is displayed in chronological order and
includes a description of each PFE and FCHIP fault and when the fault was raised and cleared.
NOTE: For Junos OS ... | [] | view
Output Fields
Table 1710 on page 27877 lists the output fields for the show system errors history command. Output
fields are listed in the approximate order in which they appear.
Table 1710: show system errors history Output Fields
Field Name
Field Description
Fault (module, error-id, board-
name/component-name, P... | Command introduced in Junos OS Evolved Release 18.3R1. | [] | |
show system errors inactive | show system errors inactive
<detail> | Description of the error.
State
State of the error. Values are: enabled or disabled.
Scope
Scope classification to which the error belongs. Values include board and pfe.
Category
Category subgroup under the scope level to which the error belongs. Values include:
core, functional, io, memory, processing, storage, and sw... | [
{
"name": "none",
"desc": "Display a brief summary of the system error information for all applicable FRUs."
},
{
"name": "detail",
"desc": "(Optional) Display detailed system error information."
}
] | admin
Output Fields
Table 1711 on page 27880 list the output fields for the show system errors inactive command. Output
fields are listed in the approximate order in which they appear.
Table 1711: show system errors inactive Output Fields
Field Name
Field Description
Error Name
Name of error.
Identifier
Each error is u... | Command introduced in Junos OS Evolved Release 19.4R1. | [] | |
show system errors | show system errors
<cb slot| ccg slot | fan slot | fpc slot | psm slot | re slot | sib slot> | Display information about faults in the system. You can display all errors or the errors for one system
component. Use this command to understand about faults and their correlation with other events. First,
top level root causes are listed, with board level faults followed by component level faults. Next, details
for a... | [] | view
Output Fields
Table 1712 on page 27887 lists the output fields for the show system errors command. Output fields are
listed in the approximate order in which they appear.
Table 1712: show system errors Output Fields
Field Name
Field Description
Top level root causes
Display of the top level faults with board level... | Command introduced in Junos OS Evolved Release 18.3R1. | [] | |
show system filesystem encryption status | show system filesystem encryption status
<re0 | re1 | routing-engine> | View the file-system encryption status. | [
{
"name": "none",
"desc": "View the file-system encryption status for all Routing Engines."
},
{
"name": "re0",
"desc": "(Optional) View the file-system encryption status on RE0."
},
{
"name": "re1",
"desc": "(Optional) View the file-system encryption status on RE1."
},
{
"na... | view
Output Fields
Table 1 lists the output fields for the show system filesystem encryption status command.
Table 1713: show system filesystem encryption status Output Fields
Field Name
Field Description
Level of Output
Device
Shows the partition disk that is encrypted.
Enabled or disabled
Sample Output
show system fi... | Command introduced in Junos OS Release 22.3R1. | [
"Encryption with Trusted Platform Module"
] | |
show system firmware (Junos OS Evolved) | show system firmware
<detail>
<optics (cdb-advertisement fpc-slot slot-number pic-slot slot-number port-number port-number |
status)> | Display firmware information.
Use Feature Explorer to confirm platform and release support for specific features. | [
{
"name": "detail <(fpc slot-number> | sfb",
"desc": ""
},
{
"name": "slot-number)>",
"desc": "Displays the current, primary, golden, and available versions of firmware in addition to the fields usually displayed."
},
{
"name": "optics status",
"desc": "Show optics firmware informati... | view | [] | ||
show system firmware | show system firmware
<cb number>
<compatibility>
<detail <(fpc slot-number>> | sfb slot-number)> >
<fpc slot-number>
<ftc slot-number>
<pem slot-number>
<routing-engine slot-number>
<sfb slot-number> | Display firmware information. | [
{
"name": "all",
"desc": "Status Firmware condition on the router or switch."
},
{
"name": "all, except",
"desc": ""
},
{
"name": "compatibility",
"desc": ""
},
{
"name": "and detail",
"desc": "Action Whether you can upgrade or downgrade, or if no action is available (non... | view
Output Fields
The following table lists all possible output fields for the show system firmware command. The fields that are
displayed may vary depending on the platform and software release. Output fields are listed in the
approximate order in which they appear.
Table 1715: show system firmware Output Fields
Fiel... | Command introduced in Junos OS Release 7.4.
Options cb, detail, fpc, ftc, pem, routing-engine, and sfb introduced in Junos OS Release 24.2R1. | [] | |
show system health-monitor | show system health-monitor
<fpc fpc-slot fpc-slot> | Display the J-Insight health monitor results. Starting with Junos OS Release 18.2R1, J-Insight supports
health monitoring for FPC FRUs on the MX Series routers.
Before you can generate output with show system health-monitor, you will need to perform an initial
CLI configuration. Please see J-Insight Device Monitor Basi... | [
{
"name": "none",
"desc": "Display information for all FPCs."
},
{
"name": "fpc fpc-slot fpc-slot",
"desc": "(Optional) Display information for a specified FPC."
}
] | admin
Output Fields
Table 1716 on page 27912 lists the output fields for the show system health-monitor command. Output
fields are listed in the approximate order in which they appear.
Table 1716: show system health-monitor Output Fields
Field Name
Field Description
Component
Platform component name.
Health-Parameter
H... | Command introduced in Junos OS Release 18.2R1. | [
"J-Insight Device Monitor Basic Configuration",
"J-Insight Device Monitor Basic Configuration",
"J-Insight Device Monitor Basic Configuration",
"J-Insight Device Monitor Basic Configuration"
] | |
show system information | show system information | Display high-level system information for the device including the hostname, model number, device
family, and Junos OS release. | [
{
"name": "none",
"desc": "Display system information for the device."
}
] | view
Sample Output
show system information
user@mx960-a> show system information
Hostname: mx960-a
Model: mx960
Family: junos
Junos: 24.4R1.9
NOTE: Starting in Junos OS Release 24.4R1, the show system information command output
lists the Hostname field first instead of last. | Command introduced in Junos OS Release 17.2. | [] | |
show system inventory hardware cpu | show system inventory hardware cpu | Display system CPU statistics. | [] | view
Output Fields
Table 1717 on page 27918 lists the output fields for the show system inventory hardware cpu command.
Output fields are listed in the approximate order in which they appear.
NOTE: Starting in Junos OS Release 22.1R1, the CPU allocations are displayed as a
number range (for example, 4-7) instead of ind... | Command introduced in Junos OS Release 15.1X53-D40. | [] | |
show system khms-stats | show system khms-stats
<detail> | Display information about interface states and statistics for next hop and memory usage. | [
{
"name": "detail",
"desc": "Display information about kernel health parameters, such as graceful Routing Engine switchover (GRES) and in-service software upgrade (ISSU)."
}
] | View
Sample Output
show system khms-stats
user@host> show system khms-stats
Memory usage by ifstates, routes, nexthops, gencfg blobs
============================================================================
Memory type Total no. of states Memory used Percentage of Dead states
Ifstate 885 ... | Command introduced in Junos OS 19.3R1. | [] | |
show system license (View) | show system license
<bandwidth | installed | fpc | keys | status | usage> | Display licenses and information about how licenses are used. | [
{
"name": "none",
"desc": "Display all license information."
},
{
"name": "bandwidth",
"desc": "(Optional) Display a summary of advanced and premium bandwidth used by flex capable FPCs."
},
{
"name": "installed",
"desc": "(Optional) Display installed licenses only."
},
{
"nam... | view
Output Fields
Table 1718 on page 27932 lists the output fields for the show system license command. Output fields are
listed in the approximate order in which they appear.
Table 1718: show system license Output Fields
Field Name
Field Description
Feature name
Name assigned to the configured feature. You use this i... | Command introduced in Junos OS Release 9.5. Logical system status option added in Junos OS Release
11.2. Support for flex FPC and bandwidth licensing added in Junos OS Release 22.1 for MX platforms. | [] | |
show system login lockout | show system login lockout | This command displays the usernames locked after unsuccessful login attempts. | [] | view and system
Output Fields
Table 1719 on page 27937 lists the output fields for the show system login lockout command. Output fields
are listed in the approximate order in which they appear.
Table 1719: show system login lockout
Field Name
Field Description
Level of Output
User
Username
All levels
Lockout start
Date... | Command introduced in Junos OS Release 11.2. | [
"retry-options"
] | |
show system mac-addresses (JDM) | show system mac-addresses | Display information related to the Juniper Device Manager (JDM) management interface MAC address
and available MAC address range. | [] | View
Output Fields
Table 1720 on page 27938 describes the output fields for the show system mac-addresses command. Output
fields are listed in the approximate order in which they appear.
Table 1720: show system mac-addresses Output Fields
Field Name
Field Description
Management Interface MAC Addresses
Table 1720: show... | Command introduced in Junos OS Release 19.2R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system max-smbios-version (JDM) | show system max-smbios-version | Display the latest SMBIOS version supported by the Juniper Device Manager (JDM). | [] | View
Sample Output
show system max-smbios-version
user@jdm> show system max-smbios-version
Version : v2 | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system memory (JDM) | show system memory | Display the memory usage information about the host server, Juniper Device Manager (JDM), and guest
network functions (GNF). | [] | View
Output Fields
Table 1721 on page 27943 describes the output fields for the show system memory command. Output fields
are listed in the approximate order in which they appear.
Table 1721: show system memory Output Fields
Field Name
Field Description
Memory Usage Information
Displays the following memory usage info... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system memory | show system memory
<node name> | Display system-wide memory distribution and usage including the Junos kernel, software processes, and
memory disks. Use the show system memory command for troubleshooting with Juniper Networks Customer
Support. | [
{
"name": "none",
"desc": "Display the system memory distribution and usage information."
},
{
"name": "all-members",
"desc": "(EX4200 switches and MX Series routers only) (Optional) Display system memory distribution and usage information for all members of the Virtual Chassis configuration."
... | view
Output Fields
Table 1722 on page 27947 lists the output fields for the show system memory command. Output fields are
listed in the approximate order in which they appear.
Table 1722: show system memory Output Fields
Field Name
Field Description
System memory usage distribution
Amount of memory used by the system,... | Command introduced in Junos OS Release 12.1. | [] | |
show system monitor memory actions | show system monitor memory actions (all | system | process) | Displays the history of actions performed when the threshold level for any event is crossed. You can
view the history of actions for a process or for a system or both. | [
{
"name": "all",
"desc": "Display the history of actions performed when the threshold level for any event is crossed for the entire system as well as per process."
},
{
"name": "system",
"desc": "Display the history of actions performed when the threshold level for any event is crossed at the sy... | admin
Output Fields
Table 1723 on page 27956 lists the output fields for the show system monitor memory actions command.
Output fields are listed in the approximate order in which they appear.
Table 1723: show system monitor memory action Output Fields
Field Name
Field Description
Level of Output
Category
Specifies if... | Command introduced in Junos OS Release 20.2R1 | [] | |
show system monitor memory events | show system monitor memory events (all | system | process) | Displays the history of events, whether they are major, minor, or critical. The events can be either for
the system or per process. Use this command to view all the recorded events. When the condition is
first detected, an event is raised. If the condition persists with the same severity, the event is not
reported mult... | [
{
"name": "all",
"desc": "Display the history of events for the entire system as well as per process."
},
{
"name": "system",
"desc": "Display the history of events at the system level."
},
{
"name": "process",
"desc": "Display the history of events per process."
}
] | admin
Output Fields
Table 1724 on page 27958 lists the output fields for the show system monitor memory events command.
Output fields are listed in the approximate order in which they appear.
Table 1724: show system monitor memory events Output Fields
Field Name
Field Description
Level of Output
Category
Specifies if t... | Command introduced in Junos OS Release 20.1R1. | [] | |
show system monitor memory status | show system monitor memory status (all | system | process) | Displays the current instant snapshot of the health of the device. You can view current health of both
the modules: system and process. | [
{
"name": "all",
"desc": "Display the memory usage status of the entire system as well as per process."
},
{
"name": "system",
"desc": "Display the memory usage status at the system level."
},
{
"name": "process",
"desc": "Display the memory usage status per process."
}
] | admin
Output Fields
Table 1725 on page 27961 lists the output fields for the show system monitor memory command. Output
fields are listed in the approximate order in which they appear.
Table 1725: show system monitor memory Output Fields
Field Name
Field Description
Level of Output
No.
Number
all
process
Resource
Reso... | Command introduced in Junos OS Release 20.1R1. | [] | |
show system name-resolution | show system name-resolution | Display hostname-to-IP-address mappings. | [] | view
Output Fields
Table 1726 on page 27964 lists the output fields for the show system name-resolution command. Output
fields are listed in the approximate order in which they appear.
Table 1726: show system name-resolution Output Fields
Field Name
Field Description
Last update
Date and time when the hostname-to-IP a... | Command introduced in Junos OS Release 9.6. | [] | |
show system network (JDM) | show system network | Display the statistics information for physical interface, JDM interface, and interfaces per guest network
function (GNF). | [] | View
Output Fields
Table 1727 on page 27966 describes the output fields for the show system network command. Output fields
are listed in the approximate order in which they appear.
Table 1727: show system network Output Fields
Field Name
Field Description
Physical Interfaces
Name
Name of the physical interface.
Index
... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system node-attributes | show system node-attributes | Show node attribute configuration. Attributes are properties of the node that determine what kind of
application gets launched on the node. | [] | view
Output Fields
For a description of the output fields, see Table 1728 on page 27971. Output fields are listed in the
approximate order of appearance.
Table 1728: show system node-attributes Output Fields
Field Name
Field Description
Attribute
Name of the node attribute. Typical node attribute names are FPC, GlobalI... | Command introduced in Junos OS Evolved Release 18.3R1. | [] | |
show system nodes | show system nodes
<node-name> | Display information about active nodes on the system. | [
{
"name": "node-name",
"desc": "(Optional) Name of the node. If no specific node is named, the output shows data for all nodes."
}
] | view
Output Fields
Table 1729 on page 27974 lists the output fields for the show system nodes command.
Table 1729: show system nodes Output Fields
Field Name
Field Description
Attributes
Shows the node attributes by name and whether the attribute is active or spare.
Node
Name of the node.
Node ID
A unique integer that ... | Command introduced in Junos OS Evolved Release 18.3R1. | [] | |
show system ntp threshold | show system ntp threshold | Display the current threshold and reject mode configured information. | [] | view
Output Fields
lists the output fields for the Table 1730 on page 27976 show system ntp threshold command. Output fields
are listed in the approximate order in which they appear.
Table 1730: show system ntp threshold Output Fields
Field Name
Field Description
NTP threshold
Assign a threshold value for Network Time ... | Command introduced in Junos OS Release 15.1X49-D70.
Command qualified for Junos OS Evolved Release 25.4R1. | [
"NTP Time Synchronization on SRX Series Devices",
"show system packet-forwarding-options hw-resource-monitor monitor-"
] | |
profile | show system packet-forwarding-options hw-resource-monitor monitor-profile monitor-profile-name | Display the parameters for the monitor profile that is used for hardware resource threshold monitoring.
You can simplify how utilization information is displayed by mapping resource lists to a monitor
profile.The same monitor profile can be used for multiple resource lists, but a single resource list cannot
be mapped t... | [] | view
Output Fields
"show system packet-forwarding-options hw-resource-monitor monitor-profile" on page 27978 lists the
output fields for the show system packet-forwarding-options hw-resource-monitor monitor-profile command.
Table 1731: show system packet-forwarding-options hw-resource-monitor monitor-profile Output
Fi... | Command introduced in Junos OS Release 24.2R1 for EX4100-48MP, EX4400-24MP, EX4650,
QFX5120-32C, QFX5120-48T, QFX5120-48Y, and QFX5120-48YM. | [
"No Link Title",
"show system packet-forwarding-options hw-resource-monitor resource-"
] | |
list | show system packet-forwarding-options hw-resource-monitor resource-list resource-list-name | Displays the hardware resources in a resource list. | [] | view
Output Fields
"show system packet-forwarding-options hw-resource-monitor resource-list" on page 27980 lists the
output fields for the show system packet-forwarding-options hw-resource monitor resource-list command.
Table 1732: show system packet-forwarding-options hw-resource-monitor resource-list Output Fields
F... | Command introduced in Junos OS Release 24.2R1 for EX4100-48MP, EX4400-24MP, EX4650,
QFX5120-32C, QFX5120-48T, QFX5120-48Y, and QFX5120-48YM. | [
"No Link Title",
"show system packet-forwarding-options hw-resource-monitor"
] | |
utilization-info | show system packet-forwarding-options hw-resource-monitor utilization-info | Displays hardware resource utilization information for a resource list. | [] | edit
Output Fields
Table 1733 on page 27983 lists the output fields for the show system packet-forwarding-options hw-resource-
monitor utilization-info command.
Table 1733: show system packet-forwarding-options hw-resource-monitor utilization-info Output
Fields
Field Name
Field Description
HW Resource Name
The resource... | Command introduced in Junos OS Release 24.2R1 for EX4100-48MP, EX4400-24MP, EX4650,
QFX5120-32C, QFX5120-48T, QFX5120-48Y, and QFX5120-48YM. | [
"No Link Title"
] | |
show system packet-forwarding-options hw-resource-utilization-info | show system packet-forwarding-options hw-resource-utilization-info | Show the maximum capacity and current utilization for all applicable resources. This command can be
used to display the utilization of hardware resources even if resource lists are not configured. | [] | edit
Output Fields
Table 1734 on page 27988 lists the output fields for the show system packet-forwarding-options hw-resource-
utilization-info command.
Table 1734: show system packet-forwarding-options hw-resource-utilization-info Output Fields
Field Name
Field Description
HW Resource Name
The resource name. The value... | Command introduced in Junos OS Release 24.2R1 for EX4100-48MP, EX4400-24MP, EX4650,
QFX5120-32C, QFX5120-48T, QFX5120-48Y, and QFX5120-48YM.
Command introduced in Junos OS Release 24.4R1 for QFX5220-32CD, QFX5220-128C,
QFX5130-32CD, QFX5700, QFX5230-64CD, QFX5240-64OD, and QFX5240-64QD. | [
"No Link Title"
] | |
show system processes | show system processes
<brief | detail | extensive | summary>
<node node-name>
<wide> | Display information about software processes that are running on the router or switch and that have
controlling terminals. | [
{
"name": "none",
"desc": "Display standard information about system processes."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive | summary",
"desc": "(Optional) Display the specified level of detail."
},
{
"name": "adaptive-services",
"desc": "(Optiona... | view
Output Fields
The following table describes the output fields for the show system processes command. Output fields are
listed in the approximate order in which they appear.
Table 1735: show system processes Output Fields
Field Name
Field Description
Level of Output
last pid
Last process identifier assigned to the... | Command introduced before Junos OS Release 7.4.
Option sfc introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Enhanced output regarding per CPU usage introduced in Junos OS Release 16.1R3 for Junos OS with
upgraded FreeBSD. | [
"Junos OS Routing Processes",
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system queues | show system queues
<all-members>
<local>
<member member-id> | Display queue statistics. | [
{
"name": "all-chassis",
"desc": "(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display system queue statistics for all the T640 routers in the chassis that are connected to the TX Matrix router. On a TX Matrix Plus router, display system queue statistics for all the ... | maintenance
Output Fields
Table 1736 on page 28015 lists the output fields for the show system queues command. Output fields are
listed in the approximate order in which they appear.
Table 1736: show system queues Output Fields
Field Name
Field Description
Output interface
Interface on the device on which the queue ex... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system random-mac-prefix (JDM) | show system random-mac-prefix | Display the random MAC prefix generated by JDM. This pseudo-random MAC prefix forms part of a
MAC address associated with an unlicensed guest network function (GNF).
NOTE: Before creating a GNF, you must ensure that you have configured commit
synchronization as part of JDM interfaces configuration so that the random MA... | [] | View
Sample Output
show system random-mac-prefix
user@jdm> show system random-mac-prefix
Mac-Prefix : 0x1e | Command introduced in Junos OS Release 19.2R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show system reboot | show system reboot | Display pending system reboots or halts. | [
{
"name": "none",
"desc": "Display pending reboots or halts on the active Routing Engine. For Junos OS Evolved, the show system reboot command is applicable to all nodes (Routing Engines and FPCs). There is no system reboot command for a specific Routing Engine. Hence, the show system reboot command shows t... | maintenance
Sample Output
show system reboot
user@host> show system reboot
reboot requested by root at Wed Feb 10 17:40:46 1999
[process id 17885]
show system reboot all-lcc (TX Matrix Router)
user@host> show system reboot all-lcc
lcc0-re0:
-----------------------------------------------------... | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Routing Matrix with a TX Matrix Plus Router Solutions Page"
] | |
show system resource-monitor ifd-cos-queue-mapping fpc | show system resource-monitor ifd-cos-queue-mapping fpc slot-number | Display the scheduler usage of each Packet Forwarding Engine and the mapping of scheduler blocks to
CoS-capable physical interface (IFDs). | [
{
"name": "slot-number",
"desc": "Display the Junos OS utilization information of memory resources for the specified slot number in which the FPC is installed."
}
] | view
Output Fields
Table 1737 on page 28024 lists the output fields for the show system resource-monitor ifd-cos-queue-mapping
fpc command. Output fields are listed in the approximate order in which they appear.
Table 1737: show system resource-monitor ifd-cos-queue-mapping fpc Output Fields
Field
Field Description
PFE... | Command introduced in Junos OS Release 17.4R1. | [
"show system resource-monitor fpc"
] | |
show system resource-monitor subscribers-limit | show system resource-monitor subscribers-limit
<chassis>
<fpc slot-number>
<pic number>
<port number>
<extensive> | Display information about subscriber limits for the specified hardware element, chassis, MPC, MIC, or
port by client type. Shows the configured limit, the number of subscribers of the type currently logged
in, and the number of subscribers that have been denied login because the limit has been reached. Use
the extensiv... | [
{
"name": "extensive",
"desc": "(Optional) Display information for the specified hardware element and all subordinate elements that have a configured subscriber limit."
},
{
"name": "chassis",
"desc": "(Optional) Subscriber limit statistics for the chassis."
},
{
"name": "fpc slot-number... | view
Output Fields
Table 1739 on page 28027 lists the output fields for the show system resource-monitor subscribers-limit
command. Output fields are listed in the approximate order in which they appear.
Table 1739: show system resource-monitor subscribers-limit Output Fields
Field Name
Field Description
Level of Outp... | Command introduced in Junos OS 17.3R1. | [
"Limiting Subscribers by Client Type and Hardware Element with Resource Monitor",
"show system resource-monitor fpc"
] | |
show system resource-monitor summary | show system resource-monitor summary | Displays the configured threshold and the current state of each slot and its associated PFEs. Raw CoS
Queue allocation data is presented per scheduler block (pool). | [] | view
Output Fields
The table below lists the output fields for the show system resource-monitor summary command. Output fields
are listed in the approximate order in which they appear.
Table 1740: show system resource-monitor summary Output Fields
Field Name
Field Description
Throttle
Status of throttling of subscriber... | Command introduced in Junos OS Release 20.2R1 on MX Series routers. | [
"show system resource-monitor ifd-cos-queue-mapping fpc",
"show system resource-monitor subscribers-limit"
] | |
show system resource-monitor | show system resource-monitor ( fpc | summary )
<slot slot-number> | Display the utilization of memory resources on the Packet Forwarding Engines for all FPCs or a specific
FPC. The filter memory denotes the filter counter memory used for firewall filter counters. The asterisk
(*) displayed next to each of the memory regions denotes the ones for which the configured threshold is
being c... | [
{
"name": "slot",
"desc": ""
},
{
"name": "slot-number",
"desc": "Display the Junos OS utilization information of memory resources for the specified slot number in which the FPC (or MPC) is installed. NOTE: On the MX80 router, the MPCs are built into the chassis and are represented in the CLI as... | view
Output Fields
Table 1742 on page 28038 lists the output fields for the show system resource-monitor fpc command.
Output fields are listed in the approximate order in which they appear.
Table 1742: show system resource-monitor fpc Output Fields
Field Name
Field Description
Free Heap Memory Watermark
Configured wate... | Command introduced in Junos OS Release 15.1. | [
"show system resource-monitor summary"
] | |
show system rollback | show system rollback number
<compare number | configuration-revision> | This command displays the contents of a previously committed configuration, or the differences
between two previously committed configurations.
NOTE: The show system rollback command is an operational mode command and cannot
be issued with run from configuration mode. | [
{
"name": "number",
"desc": "Number of a configuration to view. The output displays the configuration. The range of values is 0 through 49."
},
{
"name": "compare number",
"desc": "(Optional) Number of another previously committed (rollback) configuration to compare to rollback number. The outpu... | view
Sample Output
show system rollback compare
user@host> show system rollback 3 compare 1
[edit]
+ interfaces {
+ ge-1/1/1 {
+ unit 0 {
+ family inet {
+ filter {
+ input mf_plp;
+ }
+ address 10.1.1.1/10;
+ ... | Command introduced before Junos OS Release 7.4.
Option configuration-revision introduced in Junos OS Release 20.4R1 and Junos OS Evolved Release
20.4R1. | [] | |
show system schema | show system schema module module output-directory path
<format format> | Display the schema in the specified format. If you do not specify a format, the device displays the
schema in YANG. | [
{
"name": "format",
"desc": ""
},
{
"name": "format",
"desc": "(Optional) Data modeling language of the schema. Specify yang to display the schema in YANG format. Default: yang Values: yang"
},
{
"name": "output-directory",
"desc": ""
},
{
"name": "path",
"desc": "Speci... | view
Sample Output
show system schema module all-conf
user@host> show system schema module all-conf output-directory /var/tmp/yang
user@host>
show system schema module (Junos OS Release 19.1 and earlier)
user@host> show system schema module junos-conf-root
/*
* Copyright (c) 2017 Juniper Networks, Inc.
* All rights ... | Command introduced in Junos OS Release 14.2.
output-directory option added in Junos OS Release 16.1R1.
module values all-genstate and junos-genstate-* added in Junos OS Release 25.4R1 and Junos OS Evolved
Release 25.4R1. | [
"Understanding YANG on Devices Running Junos OS",
"Understanding Junos OS YANG Modules",
"YANG Modules Overview",
"Using Juniper Networks YANG Modules"
] | |
show system security-profile scheduler | show system security-profile scheduler
detail
logical-system <logical-system-name>
root-logical-system
summary
tenant <tenant-name>
terse | Displays the number of schedulers that the user logical system administrators and primary logical system
administrators can configure for their logical systems if the security profile is bound to the logical
systems. The existing show command for the security-profile scheduler is enhanced with tenant
support. | [
{
"name": "detail",
"desc": "Displays the detailed output."
},
{
"name": "logical-system",
"desc": "Displays the name of the logical system."
},
{
"name": "root-logical-system",
"desc": "Displays root logical system as default."
},
{
"name": "summary",
"desc": "Displays t... | view
Output Fields
Table 1743 on page 28049 lists the output fields for the show system security-profile scheduler command.
Output fields are listed in the approximate order in which they appear.
Table 1743: show security-profile scheduler Output Fields
Field Name
Field Description
logical-system tenant name
Name of th... | Statement introduced in Junos OS Release 11.2.
The tenant option is added in Junos OS Release 18.3R1. | [] | |
show system security-profile secure-wire | show system security-profile secure-wire
<all-logical-systems-tenants>
<detail>
<logical-system (all | logical-system-name)>
<root-logical-system>
<summary>
<tenant (all | tenant-system-name)>
<terse> | Display information about secure wire resource allocation. | [
{
"name": "none",
"desc": "Display information about all configured secure wire resource allocation."
},
{
"name": "all-logical-systems-tenants",
"desc": "Display information about all configured logical system and tenant"
},
{
"name": "detail",
"desc": "Display detailed information ... | view
Output Fields
Table 1744 on page 28053 lists the output fields for the show system security-profile secure-wire command
in the approximate order in which they appear.
Table 1744: show system security-profile secure-wire Output Fields
Field Name
Field Description
logical-system tenant
name
Name of the logical syste... | Command introduced in Junos OS Release 12.3X48-D10.
logical-system option introduced in Junos OS Release 19.3R1. | [
"Understanding Secure Wire on Security Devices",
"Secure Wire for Logical Systems"
] | |
show system security-profile security-log-stream-number detail | show system security-profile security-log-stream-number detail
logical-system (all | logical-system-name)
tenant (all | tenant-system-name) | Display information about a resource allocated to the logical system or tenant system in a security
profile with security log stream number. | [
{
"name": "logical-system-name (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "Display resource information for all logical systems, including the primary logical system or a particular logical system."
},
{
"name": "tenant (all | tenant-system-name)",
"desc": "Disp... | view
Output Fields
Table 1745 on page 28057 lists the output fields for the show system security-profile security-log-stream-
number summary command. Output fields are listed in the approximate order in which they appear.
Table 1745: show system security-profile security-log-stream-number summary Output Fields
Field Na... | Command introduced in Junos OS Release 18.2R1.
The tenant option introduced in Junos OS Release 18.3R1. | [] | |
show system security-profile security-log-stream-number summary | show system security-profile security-log-stream-number summary (detail |terse) | Display summary information about the resource for all logical systems. | [
{
"name": "detail",
"desc": "Display detailed output."
},
{
"name": "terse",
"desc": "Display terse output (default)."
}
] | view
Output Fields
Table 1746 on page 28061 lists the output fields for the show system security-profile security-log-stream-
number summary command. Output fields are listed in the approximate order in which they appear.
Table 1746: show system security-profile security-log-stream-number summary Output Fields
Field N... | Command introduced in Junos OS Release 18.2R1. | [] | |
show system security-profile security-log-stream-number | show system security-profile security-log-stream-number
logical-system (all |logical-system-name)
tenant (all |tenant-system-name) | Display information about a resource allocated to the logical system or tenant system in a security
profile. This command can be used by the primary administrator to display resource information for the
primary logical system or user logical system. | [
{
"name": "logical-system (all |logical-system-name)",
"desc": "Display resource information for all logical systems, including the primary logical system or a particular logical system."
},
{
"name": "tenant (all |tenant-system-name)",
"desc": "Display resource information for all tenant system... | view
Output Fields
Table 1747 on page 28063 lists the output fields for the show system security-profile security-log-stream-
number logical-system all command. Output fields are listed in the approximate order in which they
appear.
Table 1747: show system security-profile security-log-stream-number logical-system all ... | Command introduced in Junos OS Release 18.2R1.
tenant option introduced in Junos OS Release 18.3R1. | [] | |
show system security-profile | show system security-profile (all-resource | resource)
detail | terse
logical-system (logical-system-name )
root-logical-system
tenant (tenant-name ) | Display information about a resource allocated to the logical system in a security profile. For each
resource specified, the number used by the logical system and the configured maximum and reserved
values are displayed.
The show system security-profile command can be used by the primary administrator to display resour... | [
{
"name": "specify one of the following resources:",
"desc": ""
},
{
"name": "address-book",
"desc": "Address books."
},
{
"name": "appfw-rule-set",
"desc": "Application firewall rule set entries."
},
{
"name": "appfw-rule",
"desc": "Application firewall rule entries."
... | view
Output Fields
Table 1749 on page 28068 lists the output fields for the show system security-profile command. Output
fields are listed in the approximate order in which they appear.
Table 1749: show system security-profile Output Fields
Field Name
Field Description
logical system name
Name of the logical system.
te... | Command introduced in Junos OS Release 11.2.
Support for application firewall added in Junos OS Release 11.3.
Option to display all resources for a logical system added in Junos OS Release 11.
Resource information for ports in source NAT pools with port translation added in Release Junos OS
11.4.
The tenant option is i... | [] | |
show system services dhcp binding | show system services dhcp binding
<detail>
<address> | (EX Series switches only) Display Dynamic Host Configuration Protocol (DHCP) server client binding
information. | [
{
"name": "none",
"desc": "Display brief information about all active client bindings."
},
{
"name": "detail",
"desc": "(Optional) Display detailed information about all active client bindings."
},
{
"name": "address",
"desc": "(Optional) Display detailed client binding information f... | view and system
Output Fields
Table 1750 on page 28075 describes the output fields for the show system services dhcp binding command.
Output fields are listed in the approximate order in which they appear.
Table 1750: show system services dhcp binding Output Fields
Field Name
Field Description
Level of Output
Allocate... | Command introduced before Junos OS Release 7.4. | [] | |
show system services dhcp client | show system services dhcp client
< interface-name >
<statistics> | Display information about DHCP clients. | [
{
"name": "none",
"desc": "Display DHCP information for all interfaces."
},
{
"name": "interface-name",
"desc": "(Optional) Display DHCP information for the specified interface."
},
{
"name": "statistics",
"desc": "(Optional) Display DHCP client statistics."
}
] | view and system
Output Fields
Table 1751 on page 28078 lists the output fields for the show system services dhcp client command.
Output fields are listed in the approximate order in which they appear.
Table 1751: show system services dhcp client Output Fields
Field Name
Field Description
Logical Interface Name
Name of ... | Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 9.0 for EX Series switches. | [] | |
show system services dhcp conflict | show system services dhcp conflict | (J Series routers only and EX Series switches) Display Dynamic Host Configuration Protocol (DHCP)
client-detected conflicts for IP addresses. When a conflict is detected, the DHCP server removes the
address from the address pool. | [] | view and system
Output Fields
Table 1752 on page 28083 describes the output fields for the show system services dhcp conflict command.
Output fields are listed in the approximate order in which they appear.
Table 1752: show system services dhcp conflict Output Fields
Field Name
Field Description
Detection time
Date and... | Command introduced before Junos OS Release 7.4. | [] | |
show system services dhcp global | show system services dhcp global | (J Series routers and EX Series switches only) Display Dynamic Host Configuration Protocol (DHCP)
global configuration options. Global options apply to all scopes and clients served by the DHCP server.
Global options are overridden if specified otherwise in scope or client options. Scope options apply to
specific subn... | [] | view and system
Output Fields
Table 1753 on page 28085 describes the output fields for the show system services dhcp global command.
Output fields are listed in the approximate order in which they appear.
Table 1753: show system services dhcp global Output Fields
Field Name
Field Description
BOOTP lease length
Length o... | Command introduced before Junos OS Release 7.4. | [] | |
show system services dhcp pool | show system services dhcp pool
<detail>
<subnet-address> | (J Series routers and EX Series switches only) Display Dynamic Host Configuration Protocol (DHCP)
server IP address pools. | [
{
"name": "none",
"desc": "Display brief information about all IP address pools."
},
{
"name": "detail",
"desc": "(Optional) Display detailed information."
},
{
"name": "subnet-address",
"desc": "(Optional) Display information for the specified subnet address."
}
] | view and system
Output Fields
Table 1754 on page 28087 describes the output fields for the show system services dhcp pool command.
Output fields are listed in the approximate order in which they appear.
Table 1754: show system services dhcp pool Output Fields
Field Name
Field Description
Level of Output
Pool name
Subne... | Command introduced before Junos OS Release 7.4. | [] | |
show system services dhcp relay-statistics | show system services dhcp relay-statistics | Display information about the DHCP relay. | [] | view and system
Output Fields
Table 1755 on page 28091 lists the output fields for the show system services dhcp relay-statistics
command. Output fields are listed in the approximate order in which they appear.
Table 1755: show system services dhcp relay-statistics Output Fields
Field Name
Field Description
Received p... | Command introduced in Junos OS Release 8.5 . | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.