model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
802865 | Pixel 7A Case (configurable) | <p>A fairly standard case for a Pixel 7A. I've included the STL file for the basic case, plus OpenSCAD source to allow customization for this phone or basically any other phone or tablet.</p><p>This would typically be printed in TPU or other flexible filament.</p> | [
"customizable",
"phone",
"phonecase",
"configurable",
"pixel7a"
] | Gadgets > Portable Devices | [
"802865/images/image_1_compressed.jpg",
"802865/images/image_2_compressed.jpg",
"802865/images/image_3_compressed.jpg"
] | [
"802865/stls/PhoneCase-7A.stl"
] | CC-BY | https://www.printables.com/model/802865 | data_0047.tar |
769195 | Pixel Buds Pro Tesla Wireless Charger Holder | [
"wirelesscharger",
"tesla",
"pixelbuds"
] | Hobby & Makers > Automotive | [
"769195/images/image_1_compressed.jpg",
"769195/images/image_2_compressed.jpg"
] | [
"769195/stls/TeslaPixelBudsProHolder.stl"
] | CC-BY | https://www.printables.com/model/769195 | data_0047.tar | |
654491 | Pixel Christmas Tree - Large with LED tea light holder | <p>This is basically a scaled up version of my <a href="https://www.printables.com/model/651862-pixel-christmas-tree-easy-vase-mode-print">"pixel" Christmas tree</a>. Now about 50% larger and includes a trunk that doubles as an LED tea light holder. Its design allows for an <i>easy</i> <strong>vase mode print</st... | [
"christmastree",
"newyear2023"
] | Seasonal designs > Winter & Christmas & New Year's | [
"654491/images/image_1_compressed.jpg",
"654491/images/image_2_compressed.jpg",
"654491/images/image_3_compressed.jpg",
"654491/images/image_4_compressed.jpg"
] | [
"654491/stls/Pixel Tree_large.stl",
"654491/stls/Pixel_star_tree_topper.stl",
"654491/stls/Trunk_LED tea light holder.stl"
] | CC-BY | https://www.printables.com/model/654491 | data_0047.tar |
763290 | Placker Dispenser with Ejector - remix | [
"toothpick",
"dispenser",
"bathroomorganizer",
"dental",
"dentalhygiene",
"flossholder",
"flosser",
"flossers",
"flosspick",
"dentalcare"
] | Healthcare > Home Medical Tools | [
"763290/images/image_1_compressed.jpg",
"763290/images/image_2_compressed.jpg",
"763290/images/image_3_compressed.jpg"
] | [
"763290/stls/lid.stl",
"763290/stls/pick_holder.stl",
"763290/stls/placker_holder_new v11.stl",
"763290/stls/placker_holder_new v15.stl",
"763290/stls/placker_holder_new v9.stl",
"763290/stls/toothpick.stl"
] | CC0 | https://www.printables.com/model/763290 | data_0047.tar | |
708738 | Plain Head for Articulated Snowman Fidget | <p>Ideal for snowpeople that prefer a minimalist aesthetic.<br><br><a href="https://www.printables.com/model/92714">Download the base model here</a><br> </p><figure class="media"><oembed url="https://youtu.be/QvqppWoIySs"></oembed></figure><p><a href="https://youtu.be/QvqppWoIySs">https://youtu.be/QvqppWoIySs</a><... | [
"snowman",
"fidget",
"winter",
"posable",
"3dprinty",
"snowpeople"
] | Toys & Games > Other Toys & Games | [
"708738/images/image_1_compressed.jpg"
] | [
"708738/stls/Demo - Assembled.stl",
"708738/stls/Head.stl"
] | CC-BY | https://www.printables.com/model/708738 | data_0047.tar |
799311 | Planter Dish | <p>Simple dish to help protect your table or countertop! Prints quickly and easily with minimal filament.</p><p>Place your potted plants on top of the dish to help protect surfaces. </p><p>This dish fits 16cm platter but can be scaled for different size pots. </p><p>Recommended Printer Settings:</p><ul><li>0.... | [
"plant",
"planter",
"dish"
] | Household > Outdoor & Garden | [
"799311/images/image_1_compressed.jpg",
"799311/images/image_2_compressed.jpg"
] | [
"799311/stls/Planter Dish v1.stl"
] | CC-BY | https://www.printables.com/model/799311 | data_0047.tar |
770825 | plate | <p>Just a simple plate</p> | [
"plate",
"simple"
] | Art & Design > 2D Plates & Logos | [
"770825/images/image_1_compressed.jpg"
] | [
"770825/stls/V1.stl"
] | CC0 | https://www.printables.com/model/770825 | data_0047.tar |
650886 | PlayStation Portal stand | <p>A stand for the <a href="https://www.playstation.com/en-gb/accessories/playstation-portal-remote-player/">PlayStation Portal</a> - Sony don't (currently) make anything like this, It's nice to have a home for devices for when they aren't used. </p><p>Doesn't have any charging capability, Which wouldn't be hard t... | [
"playstation",
"playstation5",
"playstationportal"
] | Gadgets > Video Games | [
"650886/images/image_1_compressed.jpg",
"650886/images/image_2_compressed.jpg",
"650886/images/image_3_compressed.jpg",
"650886/images/image_4_compressed.jpg"
] | [
"650886/stls/ps-portal-dock v4-flipped.stl"
] | CC-BY | https://www.printables.com/model/650886 | data_0047.tar |
709989 | Pokemon Bookmark | <p>My son has gotten into Pokemon and is reading the books. So I made a Pokemon bookmark.</p> | [] | Toys & Games > Other Toys & Games | [
"709989/images/image_1_compressed.jpg"
] | [
"709989/stls/Pokemon Bookmark.stl"
] | CC0 | https://www.printables.com/model/709989 | data_0047.tar |
800234 | POKEMON PIKACHU WALL | <p>Pokemon stickers Wall full printing with k1<br>param : 5 mm</p> | [
"pikachu",
"pokemon",
"creality",
"thingiverse",
"k1"
] | Art & Design > Wall-mounted | [
"800234/images/image_1_compressed.jpg",
"800234/images/image_2_compressed.jpg",
"800234/images/image_3_compressed.jpg",
"800234/images/image_4_compressed.jpg"
] | [
"800234/stls/06_Pokemon_Pikachu_WALL.stl"
] | CC0 | https://www.printables.com/model/800234 | data_0047.tar |
781251 | POKEMON Squirtle WALL | <p><strong>Pokemon stickers Wall full printing with k1</strong><br><strong>param : 5 mm</strong></p> | [
"pokemon",
"squirtle",
"creality",
"thingiverse",
"carapuce",
"crealityk1"
] | Art & Design > Wall-mounted | [
"781251/images/image_1_compressed.jpg",
"781251/images/image_2_compressed.jpg",
"781251/images/image_3_compressed.jpg"
] | [
"781251/stls/05_Pokemon_squirtle_WALL.stl"
] | CC0 | https://www.printables.com/model/781251 | data_0047.tar |
716481 | Poodle dog bookmark | <p>Simple bookmark of a Poodle.</p><p>Can be scaled up or down, but make sure to keep the thickness (Z-axis scale)</p> | [
"dog",
"book",
"bookmark"
] | Art & Design > 2D Plates & Logos | [
"716481/images/image_1_compressed.jpg",
"716481/images/image_2_compressed.jpg",
"716481/images/image_3_compressed.jpg"
] | [
"716481/stls/Poodle.stl"
] | CC-BY | https://www.printables.com/model/716481 | data_0047.tar |
769882 | Pop Fidget Chain | <p>An expandable and perpetually poppable fidget toy with a simple TPU mechanism.<br> </p><figure class="media"><oembed url="https://youtu.be/O1p4XR9-G_s"></oembed></figure><p><a href="https://youtu.be/O1p4XR9-G_s">https://youtu.be/O1p4XR9-G_s</a><br> </p><figure class="media"><oembed url="https://youtu.be/_v... | [
"toy",
"fidget",
"tpu",
"3dprinty",
"bubblewrap"
] | Toys & Games > Other Toys & Games | [
"769882/images/image_1_compressed.jpg",
"769882/images/image_2_compressed.jpg"
] | [
"769882/stls/Button Default.stl",
"769882/stls/Button Flat.stl",
"769882/stls/Button Round.stl",
"769882/stls/Clasp - Bottom.stl",
"769882/stls/Clasp - Top.stl",
"769882/stls/Clasp Pin.stl",
"769882/stls/Demo - Assembled.stl",
"769882/stls/Demo - Button Options.stl",
"769882/stls/Demo - Clasp.stl",
... | CC-BY | https://www.printables.com/model/769882 | data_0047.tar |
730752 | Popelnice BRUDER | <p>Jako hřídel koleček je použit kousek filamentu a zakápnuto vteřinovým lepidlem.</p> | [] | Toys & Games > Vehicles | [
"730752/images/image_1_compressed.jpg",
"730752/images/image_2_compressed.jpg",
"730752/images/image_3_compressed.jpg"
] | [
"730752/stls/kolecko_popelnice.stl",
"730752/stls/popelnice.stl",
"730752/stls/viko_popelnice.stl"
] | CC0 | https://www.printables.com/model/730752 | data_0047.tar |
734308 | Porsche 911 GT3 RS 992 | [] | Art & Design > 2D Plates & Logos | [
"734308/images/image_1_compressed.jpg"
] | [
"734308/stls/Porsche 911 GT3 RS 992.stl"
] | CC-BY | https://www.printables.com/model/734308 | data_0047.tar | |
684253 | Posable Jointed Star Wars ATST (14 joints) | <p>I wanted to do a jointed model for the Printables contest. <a href="https://www.printables.com/@Jace1969">Jace1969</a> (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. </p><p>I was trying to avoid any f... | [
"starwars",
"jointed",
"starwarslegion",
"posable",
"atst"
] | Toys & Games > Action Figures & Statues | [
"684253/images/image_1_compressed.jpg",
"684253/images/image_2_compressed.jpg",
"684253/images/image_3_compressed.jpg"
] | [
"684253/stls/Body.stl",
"684253/stls/Body_and_Thighs.stl",
"684253/stls/Bushings.stl",
"684253/stls/Bushing_Ankle.stl",
"684253/stls/Bushing_Front_Gun.stl",
"684253/stls/Bushing_Leg.stl",
"684253/stls/Bushing_Neck.stl",
"684253/stls/Bushing_Side_Gun.stl",
"684253/stls/Bushing_Thigh.stl",
"684253/s... | CC-BY | https://www.printables.com/model/684253 | data_0047.tar |
769909 | Pottery Trimming Spinners for Pottery Wheel | <p>Uses a 608 skateboard bearing. You can put a little grease around where the top and bottom meet to stop moisture from getting inside. Sealed and/or ceramic bearings would be best for preventing moisture damage.</p><p>Bottom_Trimming_Spinner can be used with any of the Top_ models other than the mini parts.</p><p>It ... | [
"pottery",
"potterywheel",
"potterytools"
] | Hobby & Makers > Tools | [
"769909/images/image_1_compressed.jpg",
"769909/images/image_2_compressed.jpg",
"769909/images/image_3_compressed.jpg",
"769909/images/image_4_compressed.jpg",
"769909/images/image_5_compressed.jpg",
"769909/images/image_6_compressed.jpg",
"769909/images/image_7_compressed.jpg",
"769909/images/image_8... | [
"769909/stls/Bottom_Trimming_Spinner.stl",
"769909/stls/ExtraLong_Mini_Top_Trimming_Spinner.stl",
"769909/stls/Flat_Top_Trimming_Spinner.stl",
"769909/stls/Full_Hand_Top_Trimming_Spinner.stl",
"769909/stls/Handle_Top_Trimming_Spinner.stl",
"769909/stls/Knob_Top_Trimming_Spinner.stl",
"769909/stls/Long_M... | CC-BY | https://www.printables.com/model/769909 | data_0047.tar |
719363 | Pound sing | [] | Art & Design > 2D Plates & Logos | [
"719363/images/image_1_compressed.jpg"
] | [
"719363/stls/Pound.stl"
] | CC0 | https://www.printables.com/model/719363 | data_0047.tar | |
797302 | Powerbank 12800 mAh - 18650 | <p>Powerbank 12800 mAh with 18650 Li-Ion batteries. Size 100x42x42mm</p><p>Part list:</p><ul><li>powerbank modul IP5310 (LX-LBC 3.1) 3.1A (1 or 2 usb)</li><li>4 Samsung INR18650-32E (4x3200 mAh)</li><li>4 screws M2x12</li><li>silicone cable AWG18</li><li>silicone glue</li></ul><p>Advice:</p><ul><li>Fix the module... | [
"18650",
"powerbank",
"batteries"
] | Gadgets > Portable Devices | [
"797302/images/image_1_compressed.jpg",
"797302/images/image_2_compressed.jpg",
"797302/images/image_3_compressed.jpg",
"797302/images/image_4_compressed.jpg",
"797302/images/image_5_compressed.jpg"
] | [
"797302/stls/CUP_1USB.stl",
"797302/stls/CUP_2USB.stl",
"797302/stls/HOUSING.stl"
] | CC0 | https://www.printables.com/model/797302 | data_0047.tar |
804147 | Predator gauntlet with retractable Wrist Blade and Scimitar | <p>This is a model of the right gauntlet of the Predator gear. The gauntlet contains a retractable Wrist Blades and Scimitar Blade. <br>I skipped any instruction video as this is rather simple assembly. <br><br><img src="https://media.printables.com/media/prints/804147/rich_content/a3d11992-0639-494a-817... | [
"blades",
"predator",
"wrist",
"gauntlet",
"scimitar"
] | Costumes & Accessories > Props | [
"804147/images/image_1_compressed.jpg",
"804147/images/image_2_compressed.jpg",
"804147/images/image_3_compressed.jpg",
"804147/images/image_4_compressed.jpg",
"804147/images/image_5_compressed.jpg",
"804147/images/image_6_compressed.jpg"
] | [
"804147/stls/xxx_-_connector_10x10x10.stl",
"804147/stls/xxx_-_cover_scim.stl",
"804147/stls/xxx_-_cover_scim2.stl",
"804147/stls/xxx_-_gauntlet_2_scimitar.stl",
"804147/stls/xxx_-_gauntlet_2_wrist_blades.stl",
"804147/stls/xxx_-_pin_10x100_2x.stl",
"804147/stls/xxx_-_pin_10x40_4x.stl",
"804147/stls/x... | CC-BY | https://www.printables.com/model/804147 | data_0047.tar |
784821 | Predator gauntlet with the retractable shield | <p>This is a model of the left gauntlet of the Predator gear. The gauntlet contains a retractable shield based on the one from the movie Pray. <br>I skipped any instruction video as this is rather simple assembly and you cannot do it wrong. The three main pieces of the upper part of the gauntlet are connected via ... | [
"armour",
"arm",
"shield",
"predator",
"gauntlet"
] | Costumes & Accessories > Props | [
"784821/images/image_1_compressed.jpg",
"784821/images/image_2_compressed.jpg",
"784821/images/image_3_compressed.jpg",
"784821/images/image_4_compressed.jpg"
] | [
"784821/stls/xxx_-_connector_10x10x10.stl",
"784821/stls/xxx_-_gauntlet.stl",
"784821/stls/xxx_-_gauntlet_a.stl",
"784821/stls/xxx_-_gauntlet_b.stl",
"784821/stls/xxx_-_gauntlet_c.stl",
"784821/stls/xxx_-_gauntlet_d.stl",
"784821/stls/xxx_-_gauntlet_whole.stl",
"784821/stls/xxx_-_gount_cov.stl",
"78... | CC-BY | https://www.printables.com/model/784821 | data_0047.tar |
765718 | Predator Shoulder Cannon Backpack | <p>This is the second piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one the Shoulder Cannon Backpack for my <a href="https://www.printables.com/model/762003-predator-plasma-caster">Plasma Caster</a>. It does not require any glue ... | [
"cannon",
"gear",
"predator",
"backpack",
"pack",
"caster",
"shoulder",
"back",
"plasma"
] | Costumes & Accessories > Props | [
"765718/images/image_1_compressed.jpg",
"765718/images/image_2_compressed.jpg",
"765718/images/image_3_compressed.jpg",
"765718/images/image_4_compressed.jpg",
"765718/images/image_5_compressed.jpg"
] | [
"765718/stls/xxx_-_connector_10x10x10.stl",
"765718/stls/xxx_-_holder_sc.stl",
"765718/stls/xxx_-_pin.stl",
"765718/stls/xxx_-_pin_20x20_5x.stl",
"765718/stls/xxx_-_shoul_can.stl",
"765718/stls/xxx_-_shoul_can_det_b.stl",
"765718/stls/xxx_-_stand.stl",
"765718/stls/xxx_m_should_can.stl"
] | CC-BY | https://www.printables.com/model/765718 | data_0047.tar |
697589 | Present box | <p>Just a present box.</p> | [
"box",
"present",
"presentbox"
] | 3D Printers > Accessories | [
"697589/images/image_1_compressed.jpg"
] | [
"697589/stls/present box.stl"
] | CC-BY | https://www.printables.com/model/697589 | data_0047.tar |
699100 | Princess Dollhouse Bed | <p>A cute dollhouse bed frame (requires supports) and mattress sized for Sylvania Family and Calico Critters which seems around 1:16 scale. </p><p>Two piece design makes it easy to ‘make’ the bed.</p><figure class="image image-style-align-left image_resized" style="width:31.98%;"><img src="https://media.printables... | [
"bed",
"dollhouse",
"hearts",
"dollhousefurniture",
"sylvanianfamilies",
"calicocritter",
"mattress"
] | Tabletop Miniatures > Props & Terrains | [
"699100/images/image_1_compressed.jpg",
"699100/images/image_2_compressed.jpg",
"699100/images/image_3_compressed.jpg",
"699100/images/image_4_compressed.jpg"
] | [
"699100/stls/PrincessBedandMattress.stl",
"699100/stls/PrincessBed_Mattress.stl",
"699100/stls/PrincessBed_Trimmed.stl"
] | CC-BY | https://www.printables.com/model/699100 | data_0047.tar |
773165 | Print in place cycloid gearbox fidget | [] | Gadgets > Other Gadgets | [
"773165/images/image_1_compressed.jpg"
] | [
"773165/stls/cycloid gearbox v1.stl"
] | CC-BY | https://www.printables.com/model/773165 | data_0047.tar | |
689152 | Print in place robot | <p>Awesome lil guy :)</p><p>Original https://www.tinkercad.com/things/gA2jPwlDVV9-customizable-print-in-place-robot</p> | [
"robot"
] | 3D Printers > Accessories | [
"689152/images/image_1_compressed.jpg"
] | [
"689152/stls/Customizable Print in Place Robot.stl"
] | CC-BY | https://www.printables.com/model/689152 | data_0047.tar |
711909 | Printable Hex Filament Spool (Fits On Bambu Labs A1 MINI) | [
"spool",
"filamentspool",
"180x180",
"a1mini"
] | 3D Printers > Accessories | [
"711909/images/image_1_compressed.jpg",
"711909/images/image_2_compressed.jpg"
] | [
"711909/stls/A1mini-bambu_spool_hex.stl",
"711909/stls/A1mini-bambu_spool_hex_2.0.stl"
] | CC0 | https://www.printables.com/model/711909 | data_0047.tar | |
734828 | Printable Rainbow Loom | <p> A printable version of the original Rainbow Loom!<br><br>I needed a lot of extra rainbow looms to make a certain bracelet, but I didn't feel like spending the money on three more of them. So I decided to whip out the calipers and make a printable version!<br><br>I printed these looms on my CR10S with a 0.6mm n... | [
"maker",
"rainbow",
"rubber",
"bracelet",
"band",
"loom"
] | Art & Design > Other Art & Designs | [
"734828/images/image_1_compressed.jpg",
"734828/images/image_2_compressed.jpg",
"734828/images/image_3_compressed.jpg",
"734828/images/image_4_compressed.jpg"
] | [
"734828/stls/LoomLongConnector.stl",
"734828/stls/LoomPins.stl",
"734828/stls/LoomShortConnector.stl"
] | GPL2.0 | https://www.printables.com/model/734828 | data_0047.tar |
769393 | Printed Solid Jessie Spool Rim | <p>I'm a big fan of Printed Solid's Jessie filaments, both PLA and PET. And while I love the eco-responsibility of their all-cardboard spools, they often get a dent, and just fall off of my <a href="https://www.printables.com/model/72737-frame-mounted-spool-holder-mk3">Rolling Spool Holder</a>, so There's a bit of a lo... | [
"printedsolid",
"jessie"
] | 3D Printers > Accessories | [
"769393/images/image_1_compressed.jpg"
] | [
"769393/stls/JessieRim.stl"
] | CC-BY | https://www.printables.com/model/769393 | data_0047.tar |
770479 | Printmaking Registration Pins | <p>Pins and Tabs used for registration of multi-color relief prints.</p><p>Print at least two Pins and then as many tabs as you need to do a print run.</p><p>When printed the tabs should fit <i>tight</i> into the pins. This is by design. Depending on your printer the tolerance may or may not make a good fit. I print th... | [
"openscad"
] | Art & Design > Other Art & Designs | [
"770479/images/image_1_compressed.jpg",
"770479/images/image_2_compressed.jpg",
"770479/images/image_3_compressed.jpg",
"770479/images/image_4_compressed.jpg",
"770479/images/image_5_compressed.jpg",
"770479/images/image_6_compressed.jpg"
] | [
"770479/stls/Registration Pins.stl",
"770479/stls/Registration Tabs.stl"
] | CC-BY | https://www.printables.com/model/770479 | data_0047.tar |
791480 | Project Box Template | <p>A parametric Model on OnShape to use as a base for creating project boxes/enclosures</p><p>Starting with this model, you can then easily remove or add features to suit your project perfectly.</p><p>All the features were named in a matter that it's easy to know what they are.<br><br>Use the Onshape link : <a href="ht... | [
"parametric",
"box",
"enclosure",
"housing",
"project",
"casing"
] | Hobby & Makers > Mechanical Parts | [
"791480/images/image_1_compressed.jpg",
"791480/images/image_2_compressed.jpg",
"791480/images/image_3_compressed.jpg"
] | [
"791480/stls/BoxTemplate-ScrewedTop - Box.stl",
"791480/stls/BoxTemplate-ScrewedTop - Cover.stl"
] | CC0 | https://www.printables.com/model/791480 | data_0047.tar |
767496 | Protective Case (TPU) for the Samsung Galaxy S23FE | <p>I made this protective case for a Samsung Galaxy S23FE, specifically to be printed in a flexible filament like TPU.</p><p>Supports are required for bridging areas.</p><p>STEP file is also included for those who wish to remix or customize.</p><p>If you are looking for a print that is better suited for hard filaments ... | [
"samsung",
"galaxy",
"s23fe"
] | Gadgets > Portable Devices | [
"767496/images/image_1_compressed.jpg",
"767496/images/image_2_compressed.jpg"
] | [
"767496/stls/S23FE Phone Case TPU v2.stl"
] | CC-BY | https://www.printables.com/model/767496 | data_0047.tar |
764991 | Proto-Pasta Spool Saver | <p>Remix of the awesome Proto-Pasta “cardboard spool side inner core insert for core rollers” In this remix I added a lip to help center the hub for a flush fit. This also stiffens the part to allow for reusability. Also, since I am not using vase mode, you can print two at a time. </p><p> </p><p>Fits 5... | [
"spool",
"protopasta",
"spoolmount",
"hub",
"spooladapter",
"protoplant"
] | 3D Printers > Accessories | [
"764991/images/image_1_compressed.jpg",
"764991/images/image_2_compressed.jpg",
"764991/images/image_3_compressed.jpg"
] | [
"764991/stls/PastaSpool.stl"
] | CC0 | https://www.printables.com/model/764991 | data_0047.tar |
750398 | Prusa Enclosure PTFE Entry | <p>As I occasionally print Manual Multicolor and always print via PTFE Tubes out of Dryboxes, I place my Drybox on top of the Enclosure and need a way to guide the PTFE in. For me, coming via the top seems natural.</p><p>So, I designed this entry point for up to five PTFE Tubes.</p><p>This is my third iteration, now us... | [
"prusa",
"enclosure",
"ptfe",
"entry"
] | 3D Printers > Prusa Parts & Upgrades | [
"750398/images/image_1_compressed.jpg",
"750398/images/image_2_compressed.jpg"
] | [
"750398/stls/Enclosure Filament Entry PTFE Guided.stl"
] | CC-BY | https://www.printables.com/model/750398 | data_0047.tar |
650189 | Prusa Mini upgraded knob - XL style plus divot | <p>I had a problem with my prusa mini knob accidentally rotating while clicking. For example, I'd try to tweak the hot-end temp a degree or two during a delicate vase and as I clicked, the knob would rotate to ‘Change Filament’ instead. </p><p>@nix had a genius idea of adding a divot to the end - which real... | [
"upgrade",
"prusa",
"knob",
"mini"
] | 3D Printers > Prusa Parts & Upgrades | [
"650189/images/image_1_compressed.jpg"
] | [
"650189/stls/Prusa XL button for Mini plus divot.stl"
] | GPL2.0 | https://www.printables.com/model/650189 | data_0047.tar |
726261 | Prusa Mk3 / Mk4 Table-Top Steel Sheet Holder x2 | <p>Steel sheet holder for 2 sheets for Prusa Mk3 / Mk4. Tapered entry for ease of use. This is designed to sit on a table, and it's recommended you hold it down with some double-sided tape. </p><p>No supports required. Infill 15%. Print out of PLA if you only put cold sheets in. Otherwise, print out of PETG or ASA... | [
"prusa",
"mk3",
"steel",
"i3",
"mk3s",
"sheet",
"pei",
"mk4"
] | 3D Printers > Accessories | [
"726261/images/image_1_compressed.jpg",
"726261/images/image_2_compressed.jpg"
] | [
"726261/stls/prusa-steel-sheet-holder.stl"
] | CC0 | https://www.printables.com/model/726261 | data_0047.tar |
683265 | Prusa MK4 electronics box cover with fan remix | <p>Remixed using Tinkercad, model can be found at <a href="https://www.tinkercad.com/things/1oxAreeb2AD-prusa-mk4-electronics-box-cover-with-fan">https://www.tinkercad.com/things/1oxAreeb2AD-prusa-mk4-electronics-box-cover-with-fan</a>.</p><p>Printed with Organic Supports to baseplate.</p><p>V2 adds extra material arou... | [
"mk4",
"mk4enclosuremod",
"mk4mod"
] | 3D Printers > Accessories | [
"683265/images/image_1_compressed.jpg"
] | [
"683265/stls/Prusa MK4 electronics box cover with fan v2.stl",
"683265/stls/Prusa MK4 electronics box cover with fan.stl"
] | CC-BY | https://www.printables.com/model/683265 | data_0047.tar |
735800 | Prusa MK4 LCD housing back side | <p>Back of the LCD housing for the Erenclosure holder. Some images are not current.</p><p>Housing closed and open for subsequent installation</p> | [
"prusa",
"display",
"lcd",
"mk4",
"xlcd"
] | 3D Printers > Prusa Parts & Upgrades | [
"735800/images/image_1_compressed.jpg",
"735800/images/image_2_compressed.jpg",
"735800/images/image_3_compressed.jpg",
"735800/images/image_4_compressed.jpg",
"735800/images/image_5_compressed.jpg",
"735800/images/image_6_compressed.jpg",
"735800/images/image_7_compressed.jpg",
"735800/images/image_8... | [
"735800/stls/xLCD-Box (MK4)below.stl",
"735800/stls/xLCD-Box (MK4)below_o.stl"
] | CC0 | https://www.printables.com/model/735800 | data_0047.tar |
662673 | Prusa Mk4 Nozzle Camera Mount | <p>WARNING! MIGHT COLLIDE WITH HEADBED CONNECTOR ON THE BED WHEN DOING LARGE PRINTS! Will try to fix soon!</p><p> </p><p>This modification of x-carriage-clip-R2.stl adds a mount for the 3DO nozzle cam. This allows you to watch your nozzle from close-up while printing.</p><p>This mount also has holders for two 5050... | [
"upgrade",
"camera",
"nozzle",
"macrophotography",
"detailed",
"nozzlecam",
"inspection",
"pccf",
"nozzlecamer",
"cameram"
] | 3D Printers > Prusa Parts & Upgrades | [
"662673/images/image_1_compressed.jpg",
"662673/images/image_2_compressed.jpg",
"662673/images/image_3_compressed.jpg",
"662673/images/image_4_compressed.jpg",
"662673/images/image_5_compressed.jpg",
"662673/images/image_6_compressed.jpg"
] | [
"662673/stls/CameraMount-R1.stl"
] | GPL2.0 | https://www.printables.com/model/662673 | data_0047.tar |
650217 | Prusa MK4 straight fan door | <p>Changed the position of the hinge and added radiuses to the magnet area, so the magnet doesnt move. I dont know why it is different on some printers but even in assembly manual they are not in 90 degrees on few photos. I ve tried putting on printer different revisions of their model on printables, but it still wasnt... | [
"mk4"
] | 3D Printers > Prusa Parts & Upgrades | [
"650217/images/image_1_compressed.jpg",
"650217/images/image_2_compressed.jpg"
] | [
"650217/stls/fan-door-RŠ.stl"
] | GPL2.0 | https://www.printables.com/model/650217 | data_0047.tar |
765068 | Prusa MK4 / MK4S / CORE ONE XLCD Knob Remix | <p>Slight modifications of the design to have an orange colored top and base.<br>The change colors layouts :<br>0mm : Orange<br>2mm : Black<br>16mm : Orange</p> | [
"prusa",
"knob",
"mk4",
"mk4s",
"xldc",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"765068/images/image_1_compressed.jpg",
"765068/images/image_2_compressed.jpg",
"765068/images/image_3_compressed.jpg"
] | [
"765068/stls/xlcd-knob-R2.stl"
] | GPL2.0 | https://www.printables.com/model/765068 | data_0047.tar |
669169 | Prusa MK4 – rear spacers from the wall | <p>Spacers that prevent placing the printer too close to the wall, to avoid damaging the bed cables.</p><p>Designed for Prusa MK4, but it's probably compatible with MK3 as well.</p><p> </p><p>Use furniture pads (20x20mm) to avoid scratching the wall.</p><figure class="image"><img src="https://media.printables.com/... | [
"mk4",
"prusamk4"
] | 3D Printers > Prusa Parts & Upgrades | [
"669169/images/image_1_compressed.jpg",
"669169/images/image_2_compressed.jpg",
"669169/images/image_3_compressed.jpg",
"669169/images/image_4_compressed.jpg",
"669169/images/image_5_compressed.jpg"
] | [
"669169/stls/spacer.stl"
] | CC-BY | https://www.printables.com/model/669169 | data_0047.tar |
700957 | Prusa MK4/MK4S LoveBoard Cover with Led Indicators | <p>There are 4 Led Indicators :</p><ul><li>POWER (Main power supply)<br>The main power LED indicates the presence of the voltage necessary for the operation of the LoveBoard, 3.3 V.</li><li>H-ACT (Heatsink Fan Act)<br>The heatsink fan cools the hotend components, and includes the heatsink. The associated LED indicates ... | [
"indicator",
"led",
"mk4",
"mk4s"
] | 3D Printers > Prusa Parts & Upgrades | [
"700957/images/image_1_compressed.jpg",
"700957/images/image_10_compressed.jpg",
"700957/images/image_11_compressed.jpg",
"700957/images/image_12_compressed.jpg",
"700957/images/image_13_compressed.jpg",
"700957/images/image_2_compressed.jpg",
"700957/images/image_3_compressed.jpg",
"700957/images/ima... | [
"700957/stls/Prusa LoveBoard-R2-V2-cover.stl",
"700957/stls/Prusa LoveBoard-R2-V2-leds.stl",
"700957/stls/Prusa LoveBoard-R2-V3-cover.stl"
] | GPL2.0 | https://www.printables.com/model/700957 | data_0047.tar |
726563 | Prusa slicer infill patterns display/Test | <p>This is primarily a prusa slicer infill display for clients who need help deciding how exactly they want their print made.</p><p>I have also realized it comes in handy for testing and benchmarking for different material types on complex shapes.</p><p>I attached a 3mf file of just the honeycomb pattern as well. This ... | [] | Art & Design > Other Art & Designs | [
"726563/images/image_1_compressed.jpg",
"726563/images/image_2_compressed.jpg",
"726563/images/image_3_compressed.jpg",
"726563/images/image_4_compressed.jpg",
"726563/images/image_5_compressed.jpg"
] | [
"726563/stls/honeycomb test.stl",
"726563/stls/Prusa slicer infill patterns display.stl"
] | CC-BY | https://www.printables.com/model/726563 | data_0047.tar |
738084 | Prusa XL cam stand | <p>Stand that fit Ezviz IP cam can be fixed in the left side axis cap, contain 3 parts, holder, locking nut and plat. Attached make was for the first version comapred to uploaded version where user can tilt down camera to cover all print area</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"738084/images/image_1_compressed.jpg",
"738084/images/image_2_compressed.jpg"
] | [
"738084/stls/XL cam holder.stl"
] | LGPL | https://www.printables.com/model/738084 | data_0047.tar |
685464 | Prusa XL Sound Dampening Feet - Sorbothane 1.5" x 0.5" Discs | <p>These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs.</p><p> </p><p>The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on putting 2x 2-pads in the back and 2x 1-pads in the front... | [
"sound",
"feet",
"vibration",
"xl",
"isolation",
"sorbothane"
] | 3D Printers > Prusa Parts & Upgrades | [
"685464/images/image_1_compressed.jpg",
"685464/images/image_2_compressed.jpg"
] | [
"685464/stls/1x Pad Support.stl",
"685464/stls/1x Pad.stl",
"685464/stls/2x Pad Support.stl",
"685464/stls/2x Pad.stl",
"685464/stls/XL Damper Feet.stl"
] | GPL2.0 | https://www.printables.com/model/685464 | data_0047.tar |
774199 | PS2 SATA Mounting Plate Brackets (for SCPH-10350) | <p>This is a remix of Codex's mounting bracket for the SCPH-10350 version (and possibly other versions) of the PS2 Network Adapter for use with the SATA upgrade board.</p><p>I printed the original model and it came out a little strange on my X1C. I'm not sure why but from the looks of the print it seemed like the tool ... | [
"upgrade",
"adapter",
"sata",
"network",
"ps2",
"scph10350"
] | Gadgets > Video Games | [
"774199/images/image_1_compressed.jpg",
"774199/images/image_2_compressed.jpg",
"774199/images/image_3_compressed.jpg",
"774199/images/image_4_compressed.jpg"
] | [
"774199/stls/Large Bracket.stl",
"774199/stls/PS2 Sata Adapter Brackets.stl",
"774199/stls/Small Bracket.stl"
] | CC-BY | https://www.printables.com/model/774199 | data_0047.tar |
713502 | PS5 USB Cover | <p>There are 2 versions of this model depending on the console setting - vertical and horizontal. Choose the right one because if you choose the wrong one you will have rotated symbols on your PS5.</p><p>There is one setting in your slicer you must to change if you want 2 colors print. Look for ‘Pause at height’ settin... | [
"playstation",
"plug",
"console",
"cover",
"usb",
"ps5",
"usbcover"
] | Gadgets > Video Games | [
"713502/images/image_1_compressed.jpg",
"713502/images/image_2_compressed.jpg",
"713502/images/image_3_compressed.jpg",
"713502/images/image_4_compressed.jpg"
] | [
"713502/stls/PS5 USB Cover Horizontal version.stl",
"713502/stls/PS5 USB Cover Vertical version.stl"
] | CC0 | https://www.printables.com/model/713502 | data_0047.tar |
674084 | PTFE Bowden Magnetic Coupling for PC4-M6 | <p>This is a magnetic coupling for connecting PTFE bowden (or reverse-bowden) tubes together. Use this to have quick-disconnects between the printer and filament drybox etc. </p><p>The built-in threads are M6, so you can use the common PC4-M6 Pneumatic Connectors.</p><p>Use 6x3mm round magnets (6x2.8mm should also... | [
"magnetic",
"ptfe",
"ptfetubemount",
"coupling",
"pc4m6",
"ptfecoupler"
] | 3D Printers > Accessories | [
"674084/images/image_1_compressed.jpg",
"674084/images/image_2_compressed.jpg",
"674084/images/image_3_compressed.jpg",
"674084/images/image_4_compressed.jpg"
] | [
"674084/stls/Bowden-MagCoupling v6.stl"
] | CC-BY | https://www.printables.com/model/674084 | data_0047.tar |
727124 | PTFE Guide - Elegoo Neptune 4 Plus / 4 Max - No Supports | <p>This is a PTFE guide for your Elegoo Neptune 4 Plus or Neptune 4 Max that can print without supports and allows you to easily print with a Filament Dry Box like the Sunlu S4 and have the PTFE tube secured in place. </p><p> </p><p>No Supports Required<br><br>Tight tolerances on the tube holes to keep it sec... | [
"drybox",
"ptfe",
"dryer",
"filamentguide",
"neptune",
"filamentdryerdry",
"unclejessy",
"elegoo",
"s4",
"sunlu",
"unclejesse",
"neptune4",
"neptune4plus",
"neptune4max",
"sunlus4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"727124/images/image_1_compressed.jpg",
"727124/images/image_2_compressed.jpg",
"727124/images/image_3_compressed.jpg",
"727124/images/image_4_compressed.jpg",
"727124/images/image_5_compressed.jpg",
"727124/images/image_6_compressed.jpg"
] | [
"727124/stls/PFTE Guide.stl"
] | CC0 | https://www.printables.com/model/727124 | data_0047.tar |
766821 | PUC (Parametric Umbilical Clip) | <p><strong>What is PUC?</strong> </p><p>PUC stands for Parametric (or Printed) Umbilical (or Universal) Clip. The name has been shamelessly based on the brilliant <a href="https://www.printables.com/model/378567">PUG</a>.</p><p>I couldn't find a cable management clip that snapped on fairly easily without being too... | [
"clip",
"cablemanagement",
"cableclip",
"voron",
"voron24",
"umbilical"
] | 3D Printers > Voron Parts & Upgrades | [
"766821/images/image_1_compressed.jpg",
"766821/images/image_2_compressed.jpg"
] | [
"766821/stls/UmbilicalClip_4x4.5.stl",
"766821/stls/UmbilicalClip_4x4.stl",
"766821/stls/UmbilicalClip_4x5.5.stl",
"766821/stls/UmbilicalClip_4x5.stl",
"766821/stls/UmbilicalClip_4x6.5.stl",
"766821/stls/UmbilicalClip_4x6.stl",
"766821/stls/UmbilicalClip_4x7.5.stl",
"766821/stls/UmbilicalClip_4x7.stl"... | CC-BY | https://www.printables.com/model/766821 | data_0047.tar |
665329 | PUG holder for CW2 / LGX Lite | <figure class="image"><img src="https://media.printables.com/media/prints/665329/rich_content/9f996860-35b9-416c-984b-f4b2eb651b27/cw2_mount.png#%7B%22uuid%22%3A%22f53ca703-52e8-4eb5-991b-ba9c7f5bc42b%22%2C%22w%22%3A2048%2C%22h%22%3A2048%7D"></figure><h4>Nice feature</h4><p>No need to disassemble the wire harness to in... | [
"pug",
"voron",
"umbilical",
"cw2",
"clockwork2"
] | 3D Printers > Voron Parts & Upgrades | [
"665329/images/image_1_compressed.jpg",
"665329/images/image_2_compressed.jpg"
] | [
"665329/stls/holder_partA.stl",
"665329/stls/holder_partB.stl"
] | GPL3.0 | https://www.printables.com/model/665329 | data_0047.tar |
773372 | Punny Tea Bag Holders | <p>Our tea drawer was overflowing, but each package was only a quarter full. I designed these to consolidate our tea collection, while keeping the modularity of smaller packages.</p><p>The open top design allows you to open your drawer and scan through all your tea options at once. The tea holders also look great set o... | [
"tea",
"pun",
"teabag",
"teabagholder"
] | Household > Kitchen | [
"773372/images/image_1_compressed.jpg",
"773372/images/image_10_compressed.jpg",
"773372/images/image_11_compressed.jpg",
"773372/images/image_12_compressed.jpg",
"773372/images/image_2_compressed.jpg",
"773372/images/image_3_compressed.jpg",
"773372/images/image_4_compressed.jpg",
"773372/images/imag... | [
"773372/stls/Tea Holder 'Any time is tea time'.stl",
"773372/stls/Tea Holder 'Here's some mo-tea-vation'.stl",
"773372/stls/Tea Holder 'Hit me with your best pot'.stl",
"773372/stls/Tea Holder 'If at first...chai, chai again'.stl",
"773372/stls/Tea Holder 'Just Brew It'.stl",
"773372/stls/Tea Holder 'Let ... | CC-BY | https://www.printables.com/model/773372 | data_0047.tar |
700008 | PURSA Enclosure Top Plug with Bowden Tube Hole | <p><strong>Top-plug-edge.stl, but added a 4.0mm diameter hole, centered, to route a bowden tube from above printer to inside it.</strong><br><strong>Print it with PTFE or similar to withstand wear\loading\temperatures.</strong></p><p><strong>Is a very simple print, but enabled me to safely\nicely route the tube.</stron... | [
"prusa",
"enclosure",
"bowden",
"enclosureparts"
] | 3D Printers > Prusa Parts & Upgrades | [
"700008/images/image_1_compressed.jpg",
"700008/images/image_2_compressed.jpg",
"700008/images/image_3_compressed.jpg",
"700008/images/image_4_compressed.jpg",
"700008/images/image_5_compressed.jpg"
] | [
"700008/stls/Top-plug-edge-with-bowden-hole.stl"
] | GPL3.0 | https://www.printables.com/model/700008 | data_0047.tar |
799662 | Putzausgleichsringe 60mm / High Plaster Distance Rings 60 mm 6 - 25 mm height) | <p>Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als Basis dienen, Adapter oder Rahmen direkt mit einem Ausgleichsring zu verbinden.</... | [
"electricity",
"electricaloutlet",
"electricalbox",
"geraetedose",
"elektriker",
"elektro",
"elektrik",
"elektroinstallation",
"distancering",
"devicebox",
"putzausgleichsring"
] | Hobby & Makers > Electronics | [
"799662/images/image_1_compressed.jpg",
"799662/images/image_2_compressed.jpg",
"799662/images/image_3_compressed.jpg",
"799662/images/image_4_compressed.jpg"
] | [
"799662/stls/Putzausgleichsring_06mm.stl",
"799662/stls/Putzausgleichsring_07mm.stl",
"799662/stls/Putzausgleichsring_08mm.stl",
"799662/stls/Putzausgleichsring_09mm.stl",
"799662/stls/Putzausgleichsring_10mm.stl",
"799662/stls/Putzausgleichsring_11mm.stl",
"799662/stls/Putzausgleichsring_12mm.stl",
"... | CC-BY | https://www.printables.com/model/799662 | data_0047.tar |
802439 | Qidi X-Smart 3 Carbon Filter Holder | <p><strong>Update</strong>: Created a V2 of this model to now have a sliding door to fix the snap-on cover not being secure enough.<br>See <a href="https://www.printables.com/model/886436-qidi-x-smart-3-carbon-filter-holder-v2">model/886436</a></p><p>---</p><p> </p><p>To help with the fumes while printing ASA I cr... | [
"carbonfilter",
"qidi",
"carbonfilterbox",
"qiditech",
"xsmart3",
"qidixsmart3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"802439/images/image_1_compressed.jpg",
"802439/images/image_2_compressed.jpg",
"802439/images/image_3_compressed.jpg",
"802439/images/image_4_compressed.jpg"
] | [
"802439/stls/Qidi-filter_holder_body_v1.stl",
"802439/stls/Qidi-filter_holder_cover_v1.stl"
] | CC-BY | https://www.printables.com/model/802439 | data_0047.tar |
730386 | QR Code watch | <p>the QR code links directly to time.is and is free of trackers</p><p> </p><p>printing - about 13 grams of filament and an hour. files are already preoriented. while printing the QR code make sure to add a color swap at 1.2mm height</p><p> </p><p>assembly - insert the QR code into the watch body, then align ... | [
"assembly",
"gift",
"joke",
"watch",
"qrcode",
"qr",
"gimmick"
] | Fashion > Other Fashion Accessories | [
"730386/images/image_1_compressed.jpg",
"730386/images/image_2_compressed.jpg",
"730386/images/image_3_compressed.jpg"
] | [
"730386/stls/bracelet.stl",
"730386/stls/qr code watch.stl",
"730386/stls/qrcode_insert.stl",
"730386/stls/watch_body.stl"
] | CC-BY | https://www.printables.com/model/730386 | data_0047.tar |
672260 | QSFP+ Plug/Cap | <p>This is a plug/dust cap for QSFP+, QSFP28, QSFP56, QSFP-DD, QSFP112, and QSFP-DD112 ports. TPU is recommended for the best fit.</p> | [] | Gadgets > Computers | [
"672260/images/image_1_compressed.jpg",
"672260/images/image_2_compressed.jpg"
] | [
"672260/stls/qsfp28.stl"
] | GPL2.0 | https://www.printables.com/model/672260 | data_0047.tar |
663586 | QuadroGlide | <h3>QuadroGlide 🏎</h3><h3>🏆 Engineered with Innovation</h3><p>Behold the <strong>QuadroGlide</strong>, a super easy 3D printed toy car, with its four-wheel steering system propels it into a league of its own, offering an exceptional blend of precision and agility.</p><h3>🔧 Flawless Craftsmanship</h3><p><strong>Seaml... | [
"toy",
"car",
"easyprint",
"jointed",
"remixable"
] | Toys & Games > Vehicles | [
"663586/images/image_1_compressed.jpg",
"663586/images/image_2_compressed.jpg",
"663586/images/image_3_compressed.jpg"
] | [
"663586/stls/quadroglide tire mud bearing tpu.stl",
"663586/stls/quadroglide tire slick bearing tpu.stl",
"663586/stls/quadroglide tire tpu.stl",
"663586/stls/quadroglide tire track bearing tpu.stl",
"663586/stls/quadroglide tire wide mud bearing tpu.stl",
"663586/stls/quadroglide tire wide slick bearing ... | CC-BY | https://www.printables.com/model/663586 | data_0047.tar |
676188 | Quangsheng UV K5 HAM Radio Stand / Holder / Table REMIX | <p>I did a remix of <a href="https://www.printables.com/@t0b1">@t0b1</a> model, so the Quangsheng K5 Radio will fit too. Tobis model is great, btw great simple well looking design, but i need it for the Quangsheng K5 Radio.</p><p>I have redesigned the holder part, so it fits for the Quangsheng K5 Radios too (maybe some... | [
"radio",
"hamradio",
"radioholder",
"radiostand",
"quangshengk5",
"k5radio",
"quangsheng"
] | Gadgets > Other Gadgets | [
"676188/images/image_1_compressed.jpg",
"676188/images/image_2_compressed.jpg",
"676188/images/image_3_compressed.jpg",
"676188/images/image_4_compressed.jpg",
"676188/images/image_5_compressed.jpg"
] | [
"676188/stls/quangsheng-baseV2.stl",
"676188/stls/quangsheng-holder-m4_knobV2.stl",
"676188/stls/quangsheng-holderV2.stl",
"676188/stls/quangsheng_base_v1.stl",
"676188/stls/quangsheng_holder_v1.stl"
] | CC-BY | https://www.printables.com/model/676188 | data_0047.tar |
708399 | Qube 500 cover plate for PCIe slots | <p>Like the title says, this is to cover up the gaping hole at the backside next to the PCIe slots that is in the original design of the Cooler Master Qube 500 Flatpack. </p><p>It is actually a bit of a flaw in the otherwise pretty perfect Qube 500. It's the only gaping hole in the case. With this cover, no dust o... | [
"qube500",
"qube500addon",
"qube500attachment",
"qube500accessory"
] | Gadgets > Computers | [
"708399/images/image_1_compressed.jpg",
"708399/images/image_2_compressed.jpg",
"708399/images/image_3_compressed.jpg"
] | [
"708399/stls/Backplate cover.stl"
] | GPL3.0 | https://www.printables.com/model/708399 | data_0047.tar |
767009 | Radiation Hazard Trinket / Keychain / Pendant | <h3><strong>РУССКИЙ</strong></h3><p>Внешняя часть напечатана черным пластиком PETG.<br>Внутренняя часть напечатана флуоресцентным желто-зеленым пластиком PLA.</p><p>Центральная часть светится под ультрафиолетом.</p><p>Сборка: обработать края внутренней части чтобы не цеплялись во время установки, далее надавливая рукам... | [
"keychain"
] | Costumes & Accessories > Other Costume Accessories | [
"767009/images/image_1_compressed.jpg",
"767009/images/image_2_compressed.jpg",
"767009/images/image_3_compressed.jpg",
"767009/images/image_4_compressed.jpg",
"767009/images/image_5_compressed.jpg"
] | [
"767009/stls/radhazard_body.stl",
"767009/stls/radhazard_inside.stl"
] | CC-BY | https://www.printables.com/model/767009 | data_0047.tar |
714895 | RAK19003 Meshtastic Phone Backpack Case | <p>This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I could while still being convenient to use. The RAK19003 is mounted with three M2.... | [
"case",
"enclosure",
"rak",
"meshtastic",
"rak19003"
] | Gadgets > Portable Devices | [
"714895/images/image_1_compressed.jpg",
"714895/images/image_2_compressed.jpg",
"714895/images/image_3_compressed.jpg",
"714895/images/image_4_compressed.jpg",
"714895/images/image_5_compressed.jpg",
"714895/images/image_6_compressed.jpg"
] | [
"714895/stls/Case-Loop-Tall.stl",
"714895/stls/Case-Mag.stl",
"714895/stls/Case-Plain-Tall.stl",
"714895/stls/Case-Zip.stl",
"714895/stls/Lid-OLED.stl",
"714895/stls/Lid.stl"
] | CC-BY | https://www.printables.com/model/714895 | data_0047.tar |
663041 | Rancilio Silvia Equipment Holder Remix | [
"rancilio",
"silvia"
] | Household > Kitchen | [
"663041/images/image_1_compressed.jpg"
] | [
"663041/stls/Rancilio Holder v3.stl"
] | CC-BY | https://www.printables.com/model/663041 | data_0047.tar | |
705278 | Raspberry Pi 2W Einsy cover door for PrusaLink | <p>I took the original raspberry pi 2W door for the Einsy case and added radii to the slots.</p> | [
"raspberrypi",
"raspberrypizero",
"einsydoor"
] | 3D Printers > Prusa Parts & Upgrades | [
"705278/images/image_1_compressed.jpg"
] | [
"705278/stls/raspberry_cover-remix.stl"
] | GPL2.0 | https://www.printables.com/model/705278 | data_0047.tar |
737585 | Raspberry Pi CM4 IO Board Case | <p>This is a case for the Raspberry Pi Compute Module 4 IO Board. I designed it to be easily 3D printable. The one part that needs support is the overhang by the USB ports. Just paint on some tree supports. My supports came off super easily.</p><p>3 walls should be used, as the minimum wall thickness in this design is ... | [
"case",
"mount",
"board",
"enclosure",
"4",
"fan",
"raspberry",
"pi",
"sink",
"cooling",
"module",
"heat",
"cm4",
"io",
"compute"
] | Hobby & Makers > Electronics | [
"737585/images/image_1_compressed.jpg",
"737585/images/image_10_compressed.jpg",
"737585/images/image_2_compressed.jpg",
"737585/images/image_3_compressed.jpg",
"737585/images/image_4_compressed.jpg",
"737585/images/image_5_compressed.jpg",
"737585/images/image_6_compressed.jpg",
"737585/images/image_... | [
"737585/stls/Base.stl",
"737585/stls/Lid.stl"
] | GPL3.0 | https://www.printables.com/model/737585 | data_0047.tar |
738479 | Raspberry PI zero W & 2W Enclosure - Clip On | [
"raspberrypi",
"raspberrypicase",
"raspberrypizero",
"raspberrypihousing"
] | Gadgets > Computers | [
"738479/images/image_1_compressed.jpg"
] | [
"738479/stls/rpi_zero-case-bottom.stl",
"738479/stls/rpi_zero-case-top.stl"
] | CC-BY | https://www.printables.com/model/738479 | data_0047.tar | |
719537 | Ratchet Belt Hanger | <p>I needed some way to hang up my ratcheting belts, so I designed this ratchet belt hanger. This has only been tested with the Anson belt buckles.</p> | [
"organizer",
"hanger",
"belt"
] | Hobby & Makers > Organizers | [
"719537/images/image_1_compressed.jpg",
"719537/images/image_2_compressed.jpg",
"719537/images/image_3_compressed.jpg"
] | [
"719537/stls/Belt Hanger.stl"
] | CC0 | https://www.printables.com/model/719537 | data_0047.tar |
746946 | Remix - Lid for Soft Tape Measure Spool | <p>I had a hard time winding up the spool with the thumb groove on the original one. I also wanted the tape to be enclosed.</p>
<p>Created a replacement core that keeps the tape confined and has a groove on the edge (as far from center as possible) to make it easier to wind up. As a bonus, the groove can also be used t... | [
"thingiverse"
] | Household > Office | [
"746946/images/image_1_compressed.jpg",
"746946/images/image_2_compressed.jpg",
"746946/images/image_3_compressed.jpg",
"746946/images/image_4_compressed.jpg",
"746946/images/image_5_compressed.jpg",
"746946/images/image_6_compressed.jpg"
] | [
"746946/stls/core_with_lid.stl",
"746946/stls/core_with_lid_larger_2mm.stl",
"746946/stls/core_with_lid_larger_2mm_RivetedTape.stl",
"746946/stls/holder.stl",
"746946/stls/holder_larger-2mm.stl"
] | CC-BY | https://www.printables.com/model/746946 | data_0047.tar |
755193 | Remix of EDC Utility Blade Holder | <p>Remix of EDC Utility Blade Holder, added fingers pattern and modified the back of the item.</p>
Category: Hand Tools | [
"blade",
"edc",
"thingiverse"
] | Hobby & Makers > Tools | [
"755193/images/image_1_compressed.jpg",
"755193/images/image_2_compressed.jpg",
"755193/images/image_3_compressed.jpg"
] | [
"755193/stls/edc.stl"
] | CC-BY | https://www.printables.com/model/755193 | data_0047.tar |
696856 | Remix Side Cutter Replacement Handle | <p>Remix from the model of Sisul</p><p>Modified the thickness of the handle, so they align better</p><p><strong>Print with scale factor in Y-direction </strong></p><p>Scale about 108% to 110%, depends on your side-cutter</p> | [] | 3D Printers > Accessories | [
"696856/images/image_1_compressed.jpg",
"696856/images/image_2_compressed.jpg",
"696856/images/image_3_compressed.jpg"
] | [
"696856/stls/SideCutterHandle thinner.stl"
] | CC-BY | https://www.printables.com/model/696856 | data_0047.tar |
744376 | Remixed Delta-P Cover for Revo Six HotEnd | <p>Included 2 models, one takes 4 of <a href="https://www.amazon.com/dp/B0CDH36ZMX?psc=1&smid=A2L1PKBL5IWW8M&ref_=chk_typ_imgToDp">these brass inserts</a>, the second has screw/nut recesses (unchanged from original model).</p><p>Printed with 0.4mm nozzle, 0.2mm layer height, 25% infill and 4 perimeter loops.</p... | [
"mk3s",
"fan",
"duct",
"mk3smmu2s",
"mk3splus",
"deltap"
] | 3D Printers > Prusa Parts & Upgrades | [
"744376/images/image_1_compressed.jpg"
] | [
"744376/stls/delta-p_cover_revo_no-inserts.stl",
"744376/stls/delta-p_cover_revo_w-inserts.stl"
] | GPL3.0 | https://www.printables.com/model/744376 | data_0047.tar |
693530 | Resin Symbol #5 PP Coin | <p>Coin with engraved Polypropylene (PP) #5 resin symbol. Uses art from <a href="https://publicdomainvectors.org/en/free-clipart/Recyclable-polypropylene-sign-vector-image/19292.html">PublicDomainVectors.org</a>.</p> | [
"coin",
"recycling",
"coins",
"plastic",
"freecad",
"recyclingsymbol",
"publicdomainvectors"
] | Art & Design > 2D Plates & Logos | [
"693530/images/image_1_compressed.jpg"
] | [
"693530/stls/resin-5-pp-coin.stl"
] | CC0 | https://www.printables.com/model/693530 | data_0047.tar |
727370 | Retro 80's-style WWF / WWE Thumb Wrestling Ring | <p>I really liked tallman.phd's thumb wrestling ring model but didn't care for having Josef Prusa's face on it, so I remixed it to resemble the WWF ring in the 80s. I also removed the cutout for the handle on the underside of the ring as it seemed unnecessary.</p><p> </p><p>No MMU necessary, printed in multiple co... | [
"man",
"warrior",
"giant",
"hulk",
"ultimate",
"wrestling",
"wwe",
"andre",
"wwf",
"macho",
"hogan"
] | Toys & Games > Other Toys & Games | [
"727370/images/image_1_compressed.jpg"
] | [
"727370/stls/Thumb Wrestling Ring.stl"
] | CC-BY | https://www.printables.com/model/727370 | data_0047.tar |
652270 | Reuleaux Tetrahedron | <p>The classic <a href="https://en.wikipedia.org/wiki/Reuleaux_tetrahedron"><strong>Reuleaux Tetrahedron</strong></a>, which is NOT a solid of constant width.</p><p>You can print the solid in the given orientation with 0 infill and the aid of very few supports (see the print file for my recommended settings).</p><p>Pri... | [
"parametric",
"openscad",
"reuleaux",
"reuleauxtetrahedron"
] | Learning > Math | [
"652270/images/image_1_compressed.jpg",
"652270/images/image_2_compressed.jpg",
"652270/images/image_3_compressed.jpg",
"652270/images/image_4_compressed.jpg"
] | [
"652270/stls/Reuleaux Tetrahedron.stl"
] | CC0 | https://www.printables.com/model/652270 | data_0047.tar |
669026 | Revo Nozzle Holder (single) | <p>I needed a way to store my Revo nozzles on my Ender 5 style machine that was quick and easy to access. Mounts to vertical extrusions via a single M5 screw.</p> | [
"cube",
"e3d",
"nozzleholder",
"revo",
"voron"
] | 3D Printers > Other Printer Parts & Upgrades | [
"669026/images/image_1_compressed.jpg"
] | [
"669026/stls/Revo Nozzle Holster.stl"
] | CC-BY | https://www.printables.com/model/669026 | data_0047.tar |
705858 | Rey's Blaster - Star Wars the Force Awakens Replica Prop | <p>Replica of the blaster that Han Solo gives to Rey in the Force Awakens. Photos show the printed pieces after gluing the parts together, sanding, and painting. <a href="https://youtu.be/aV6Im7NSCG4?si=Ii_Y841VDxj7ml5n">We filmed a video on the process</a>.</p><figure class="media"><oembed url="https://youtu.be/aV6Im7... | [
"starwars",
"cosplay",
"replica",
"prop",
"rey",
"blaster",
"cosplayprop",
"cosplayweapon",
"cosplayaccessory"
] | Costumes & Accessories > Props | [
"705858/images/image_1_compressed.jpg",
"705858/images/image_2_compressed.jpg"
] | [
"705858/stls/ReyBackPlate.stl",
"705858/stls/ReyBarrelLower.stl",
"705858/stls/ReyBarrelUpper.stl",
"705858/stls/ReyFrontPlates.stl",
"705858/stls/ReyGripLeft.stl",
"705858/stls/ReyGripRight.stl",
"705858/stls/ReyGunBody.stl",
"705858/stls/ReyHammer.stl",
"705858/stls/ReyHandle.stl",
"705858/stls/... | CC-BY | https://www.printables.com/model/705858 | data_0047.tar |
748927 | RFID key-chain case for a chip from a bracelet | <h3>Українська:</h3><p>До вашої уваги кейс для RFID чіпа який знаходиться в гумовому браслеті. Цей кейс може бути корисний якщо браслет пошкодився, або його не зручно носити з ключами. Щоб дістати пластикову таблетку чіп з гумового браслету, його треба обережно розрізати. Пошкодити пластикову таблетку малоймовірно бо в... | [
"case",
"keychain",
"key",
"keyfob",
"rfid"
] | Household > Other House Equipment | [
"748927/images/image_1_compressed.jpg",
"748927/images/image_2_compressed.jpg"
] | [
"748927/stls/rfid_round_tag_hinged.stl",
"748927/stls/rfid_round_tag_lid.stl",
"748927/stls/rfid_round_tag_main.stl"
] | GPL3.0 | https://www.printables.com/model/748927 | data_0047.tar |
735896 | Ringing test for various rotations | <p>There are many people who believes that rotating a part in a certain angle will reduce ringing/ghosting (due to the reduction in speed in each of the axes). Well, you do not have to talk their word for it! Try it for yourself and see if it really improves the print for your specific printer!</p>
<p>Note that the mod... | [
"thingiverse"
] | 3D Printers > Test Models | [
"735896/images/image_1_compressed.jpg",
"735896/images/image_2_compressed.jpg"
] | [
"735896/stls/ringing_rotation_test.stl"
] | CC-BY | https://www.printables.com/model/735896 | data_0047.tar |
651544 | Rocket Engine Piggy Bank | [] | Hobby & Makers > Organizers | [
"651544/images/image_1_compressed.jpg",
"651544/images/image_2_compressed.jpg",
"651544/images/image_3_compressed.jpg"
] | [
"651544/stls/Racketen Spardose v2.stl"
] | GPL2.0 | https://www.printables.com/model/651544 | data_0047.tar | |
799580 | Rotary Encoder EC11 Knob | [
"knob",
"diyelectronics",
"rotary",
"encoder",
"macropad",
"pad",
"rotaryencoder",
"plaid",
"rotaryencoderknob",
"ec11",
"plaidmacropad",
"plaidpad",
"rotaryencoderec11"
] | Gadgets > Other Gadgets | [
"799580/images/image_1_compressed.jpg",
"799580/images/image_2_compressed.jpg",
"799580/images/image_3_compressed.jpg",
"799580/images/image_4_compressed.jpg",
"799580/images/image_5_compressed.jpg"
] | [
"799580/stls/Rotary_Encoder_Knob_1.stl",
"799580/stls/Rotary_Encoder_Knob_2.stl"
] | CC-BY | https://www.printables.com/model/799580 | data_0047.tar | |
706527 | Rotating desktop organizer - make-up, brushes, pens, etc. | <p>Nothing really to say, just a pretty rotating organizer.</p><p>Printed with e-sun ePLA pink-matte.</p><p>Took quite long to print (around 15 hours), in the future I will probably add a vase-mode alternative.</p> | [
"pen",
"penholder",
"makeup",
"bedroom",
"blush"
] | Household > Bathroom | [
"706527/images/image_1_compressed.jpg"
] | [
"706527/stls/rot_tray_base_main.stl",
"706527/stls/rot_tray_base_part_2.stl",
"706527/stls/rot_tray_main_body.stl"
] | CC0 | https://www.printables.com/model/706527 | data_0047.tar |
734815 | Rough Ocean Benchy Holder | <p>I love so many of the others ocean Benchy holders, but I wanted something different from what I have seen. The waves shared by @WoutChauvaux_680520 are beautiful so I cut out the hull shape in Tinkercad and here it is. I wish I had the ability to add some wake from benchy powering through the waves.</p> | [
"display",
"benchy",
"ocean",
"waves",
"benchyholder",
"benchydisplay"
] | Tabletop Miniatures > Props & Terrains | [
"734815/images/image_1_compressed.jpg",
"734815/images/image_2_compressed.jpg"
] | [
"734815/stls/Benchy Ocean Holder.stl"
] | CC0 | https://www.printables.com/model/734815 | data_0047.tar |
801055 | Round Hydrometer/Thermometer Holder | <h4>Update 23/05/26: added mirrored version to fix battery hole issue</h4><h4>Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly</h4><h4> </h4><h4>Print Settings:</h4><p>Layer Height: smaller is better, i reco... | [
"thermometer",
"temperaturesensor",
"humiditysensor",
"hydrometer"
] | Household > Other House Equipment | [
"801055/images/image_1_compressed.jpg",
"801055/images/image_2_compressed.jpg",
"801055/images/image_3_compressed.jpg"
] | [
"801055/stls/thermometer holder NEW.stl",
"801055/stls/thermometer holder original.stl"
] | GPL3.0 | https://www.printables.com/model/801055 | data_0047.tar |
773066 | Route 66 Keychain | <p>Embark on a journey through time with the “Route 66 Keychain.” This iconic design captures the essence of America’s legendary highway, offering a piece of the past to accompany you on your travels today.<br><br><strong>Features:</strong></p><ul><li><strong>Quick to Print:</strong> Speed through the printing process ... | [
"sign",
"retro",
"gift",
"easy",
"keychain",
"road",
"history",
"quick",
"simple",
"historic",
"route",
"highway",
"expressway",
"americana"
] | Art & Design > Other Art & Designs | [
"773066/images/image_1_compressed.jpg"
] | [
"773066/stls/Route 66 Keychain.stl"
] | CC-BY | https://www.printables.com/model/773066 | data_0047.tar |
667210 | Rubber band shooter | <p>you print it in place </p> | [] | Toys & Games > Other Toys & Games | [
"667210/images/image_1_compressed.jpg"
] | [
"667210/stls/ruber band shooter.stl"
] | CC-BY | https://www.printables.com/model/667210 | data_0047.tar |
775555 | Rubberband Powered Bathtub Paddle Steamer | <p>The golden age of river travel can be alive and well in your bathtub with this rubberband-powered paddle-steamer toy. Two paddle wheels and a smokestack give you all the power and stability you need to traverse the mighty Mississippi while a fully functioning tiller and rudder give you the agility to skillfully mane... | [
"toy",
"boat",
"bathtub",
"steam",
"steamboat",
"steamer",
"rubber",
"band",
"rubberband",
"willie",
"steerable"
] | Toys & Games > Vehicles | [
"775555/images/image_1_compressed.jpg",
"775555/images/image_10_compressed.jpg",
"775555/images/image_11_compressed.jpg",
"775555/images/image_12_compressed.jpg",
"775555/images/image_13_compressed.jpg",
"775555/images/image_14_compressed.jpg",
"775555/images/image_15_compressed.jpg",
"775555/images/i... | [
"775555/stls/paddle-steamer - pin.stl",
"775555/stls/paddle-steamer - port-paddle.stl",
"775555/stls/paddle-steamer - port.stl",
"775555/stls/paddle-steamer - rudder.stl",
"775555/stls/paddle-steamer - starboard-paddle.stl",
"775555/stls/paddle-steamer - starboard.stl",
"775555/stls/paddle-steamer - til... | CC-BY | https://www.printables.com/model/775555 | data_0047.tar |
726208 | Rugged Box Mk1 | <p><strong>Odolná krabička s vyměnitelnými vložkami. Zatím jich je jen pár ale časem přidám další.</strong></p><p>Durable box with changeable inserts. So far there are only a few, but I will add more over time.</p><p> </p><p><strong>Ke spojení krabičky s víkem a upevnění západek je třeba 6 šroubů M5x35. Já jsem po... | [
"box",
"rugged",
"krabice",
"changeable",
"duramax"
] | Hobby & Makers > Organizers | [
"726208/images/image_1_compressed.jpg",
"726208/images/image_2_compressed.jpg",
"726208/images/image_3_compressed.jpg",
"726208/images/image_4_compressed.jpg",
"726208/images/image_5_compressed.jpg",
"726208/images/image_6_compressed.jpg",
"726208/images/image_7_compressed.jpg",
"726208/images/image_8... | [
"726208/stls/Box insert 9x19 Luger.stl",
"726208/stls/Box Mk1.stl",
"726208/stls/Box.stl",
"726208/stls/Insert vz. 1 blank.stl",
"726208/stls/Insert vz. 10.stl",
"726208/stls/Insert vz. 11.stl",
"726208/stls/Insert vz. 12.stl",
"726208/stls/Insert vz. 2.stl",
"726208/stls/Insert vz. 3.stl",
"72620... | GPL3.0 | https://www.printables.com/model/726208 | data_0047.tar |
771820 | Rugged Button/Screw Box | [
"storagebox"
] | Gadgets > Computers | [
"771820/images/image_1_compressed.jpg"
] | [
"771820/stls/Screw box_Buttons.stl"
] | CC-BY | https://www.printables.com/model/771820 | data_0047.tar | |
787189 | Ruggedized Mini Storage Case, offset fillets for objects with corners. | <p>This is a variation of my 102x78x45mm box, but designed with offset fillets, so it can accept objects with corners.</p><p>Print in whatever material you like. You will need 2 each, m3x15 and m3x20 socket head cap screws.</p><p>Don't overtighten the screws. </p> | [] | Household > Other House Equipment | [
"787189/images/image_1_compressed.jpg"
] | [
"787189/stls/Bottom.stl",
"787189/stls/Gasket.stl",
"787189/stls/Latch.stl",
"787189/stls/Lid.stl"
] | CC-BY | https://www.printables.com/model/787189 | data_0047.tar |
722396 | Ryobi Battery USB Power Bank (3-Piece Version) | <p>My original remix printed fine in PLA but gave me trouble with PETG due to the extensive bridging. This updated design is easier to print with more challenging materials. Please see my original remix for full details and required parts. As with that one, the models were exported in their design (not print) orientati... | [] | Hobby & Makers > Electronics | [
"722396/images/image_1_compressed.jpg",
"722396/images/image_2_compressed.jpg"
] | [
"722396/stls/rybatt-body.stl",
"722396/stls/rybatt-drawer.stl",
"722396/stls/rybatt-lid.stl"
] | GPL2.0 | https://www.printables.com/model/722396 | data_0047.tar |
707007 | Safety pin extension | <p>My son has a RC car that has a roof secured by safety pins that are lost every second removal of the roof, so i made these “extensions” so that the pin is more visible if lost and easier to remove.</p><p> </p><p><strong>I printed mine on Prusa MK4 with PLA 0,4 nozzle and 0,15 layer </strong></p> | [
"safetypin"
] | Hobby & Makers > RC & Robotics | [
"707007/images/image_1_compressed.jpg",
"707007/images/image_2_compressed.jpg"
] | [
"707007/stls/zavlacka.stl"
] | CC-BY | https://www.printables.com/model/707007 | data_0047.tar |
765394 | Safety razor cover [Parametric] | <p>A cap for your safety razor.</p><h3>Design Considerations</h3><h5>Functionality</h5><ul><li>Clicks in place</li><li>Tight fit</li></ul><h5>Robustness</h5><ul><li>Whole shell flexes to click in place → no stress concentration on small area</li><li>No fragile parts</li></ul><h5>Printability</h5><ul><li>No steep overha... | [
"parametric",
"cap",
"customizable",
"cover",
"razor",
"protection",
"travel",
"freecad",
"safetyrazor",
"shaver"
] | Household > Bathroom | [
"765394/images/image_1_compressed.jpg",
"765394/images/image_2_compressed.jpg",
"765394/images/image_3_compressed.jpg"
] | [
"765394/stls/razorcap.stl"
] | CC-BY | https://www.printables.com/model/765394 | data_0047.tar |
14898 | Sahuagin | <p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a reque... | [
"dnd",
"dungeonsanddragons"
] | Toys & Games > Board Games | [
"14898/images/image_1_compressed.jpg"
] | [
"14898/stls/Sahuagin presupported.stl",
"14898/stls/sahuagin.stl"
] | CC0 | https://www.printables.com/model/14898 | data_0047.tar |
777201 | Sail board game insert organizer | <p>Insert for the regular, non-deluxe edition of Sail with the expansion. Not sure it it will fit the deluxe resources as I don't have them, but it probably would.</p><p>Print 3 of the token trays and one of each of the others. I split the cards up to make it easier to get started.<br><br>Accommodates sleeve kings slee... | [] | Tabletop Miniatures > Miniature Gaming Accessories | [
"777201/images/image_1_compressed.jpg"
] | [
"777201/stls/Large tray.stl",
"777201/stls/Small tray.stl",
"777201/stls/Tokens x3.stl"
] | CC0 | https://www.printables.com/model/777201 | data_0047.tar |
588348 | Sailing Knot Practice Cleat | <p><strong>Introduction </strong></p><p>In the last 5 years I have really got into sailing and boating in general, and even after joining a sailing club I noticed that many people subscribe to the “if you cant tie knots, tie lots” method of attaching boats. </p><p>I am just about to embark on some RYA compete... | [
"boats",
"reef",
"hitch",
"sailing",
"knots",
"knot",
"bowline"
] | Hobby & Makers > Other Ideas | [
"588348/images/image_1_compressed.jpg",
"588348/images/image_2_compressed.jpg",
"588348/images/image_3_compressed.jpg",
"588348/images/image_4_compressed.jpg"
] | [
"588348/stls/Cleat.stl",
"588348/stls/Ring Half.stl",
"588348/stls/Ring Holder.stl",
"588348/stls/Small Cleat.stl"
] | CC-BY | https://www.printables.com/model/588348 | data_0047.tar |
5647 | Sailor Moon Book ends | <p>made this for the wife she's a big fan of the show.</p>
<p>this is a big print the upright is 180mm tall</p>
<h3>Print instructions</h3><p>no supports needed. I included a test hole part to get the horizontal expansion correct to the upright.</p>
<p>I would print the upright first then the test hole</p> | [
"bookend",
"sailormoon"
] | Household > Home Decor | [
"5647/images/image_1_compressed.jpg",
"5647/images/image_2_compressed.jpg"
] | [
"5647/stls/base-upright-test-hole.stl",
"5647/stls/bookend-base.stl",
"5647/stls/bookend-upright.stl"
] | CC-BY | https://www.printables.com/model/5647 | data_0047.tar |
69454 | Sainsmart 92A TPU Profile | <p>This is a slightly tweaked profile for use with Sainsmart's 92A TPU. This filament needs lower temperatures which is the primary difference. I found this to have better results than the manufacturer settings.</p> | [
"tpu",
"settings",
"slic3rsettings",
"sainsmart"
] | 3D Printers > Test Models | [
"69454/images/image_1_compressed.jpg"
] | [
"69454/stls/sainsmart-tpu3dbenchy.stl"
] | BSD | https://www.printables.com/model/69454 | data_0047.tar |
567738 | Saint Paul | <p>Saint Paul.</p><p>Filled Back. Added UV Displacement. Sculpting. </p> | [
"christian",
"catholic",
"bible",
"paul",
"saints"
] | Art & Design > Sculptures | [
"567738/images/image_1_compressed.jpg"
] | [
"567738/stls/saintpaul.stl"
] | CC-BY | https://www.printables.com/model/567738 | data_0047.tar |
651743 | Salon Sofa | <p>Small sofa design with (3) small throw pillows and a separate base, since I wanted it to have a “wood” base with silver upholstery. </p> | [
"furniture",
"miniature",
"sofa"
] | Tabletop Miniatures > Props & Terrains | [
"651743/images/image_1_compressed.jpg"
] | [
"651743/stls/Base.stl",
"651743/stls/Sofa.stl"
] | CC-BY | https://www.printables.com/model/651743 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.