Daily Papers

When a large language model under reinforcement learning commits a wrong reasoning step early in a trajectory, standard algorithms force it to keep generating until the maximum horizon, spending compute on tokens that never receive positive reward and polluting advantage estimates with post-failure noise. We propose ESPO (Early-Stopping Proximal Policy Optimization), which detects trajectory failure on-the-fly and terminates rollouts early. At each generation step, ESPO computes a surrogate regret using only the logits already computed during sampling, and terminates when the smoothed cumulative regret significantly exceeds its estimated values. Truncated trajectories are treated as absorbing failure states with a terminal reward, concentrating negative temporal-difference (TD) errors near the detected failure step without any additional reward model or human annotation. On DeepSeek-R1-Distill-Qwen-7B trained for mathematical reasoning, ESPO surpasses PPO on AIME~2024 (46.28% vs. 45.25%), AMC~2023 (85.83% vs. 82.94%), and MATH-500 (87.42% vs. 85.43%), while saving more than 20% rollout tokens cumulatively.

Large language model agents now act on codebases, browsers, operating systems, calendars, files, and tool ecosystems, but the benchmarks used to evaluate them are fragmented: each emphasizes a different unit of measurement (final task success, tool-call validity, repeated-pass consistency, trajectory safety, or attack robustness). A line of 2024-2025 work has converged on the diagnosis that a single accuracy column is no longer the right unit of comparison for deployable agents. AgentAtlas extends this line of work with four components: (i) a six-state control-decision taxonomy (Act / Ask / Refuse / Stop / Confirm / Recover); (ii) a nine-category trajectory-failure taxonomy with two orthogonal hierarchical labels (primary_error_source, impact); (iii) a taxonomy-aware vs. taxonomy-blind methodology that measures how much of a model's apparent capability comes from the supervision in the prompt; and (iv) a benchmark-coverage audit mapping fifteen agent benchmarks against six behavioral axes. To demonstrate the methodology we run a small fixed eight-model set (1,342 generated items, four frontier closed and four open-weight) under both prompt modes. Removing the explicit label menu drops every model's trajectory accuracy by 14-40 pp to a tight 0.54-0.62 floor regardless of family, and no single model wins on all three of control accuracy, trajectory diagnosis, and tool-context utility retention. We treat the synthetic run as a measurement-protocol demonstration, not a benchmark release.

LLM-based multi-agent systems are increasingly deployed on long-horizon tasks, but a single decisive error is often accepted by downstream agents and cascades into trajectory-level failure. Existing work frames this as post-hoc failure attribution, diagnosing the responsible agent and step after the trajectory has ended. However, this paradigm forfeits any opportunity to intervene while trajectory is still unfolding. In this work, we introduce AgentForesight, a framework that reframes this problem as online auditing: at each step of an unfolding trajectory, an auditor observes only the current prefix and must either continue the run or alarm at the earliest decisive error, without access to future steps. To this end, we curate AFTraj-2K, a corpus of agentic trajectories across Coding, Math, and Agentic domains, in which safe trajectories are retained under a strict curation pipeline and unsafe trajectories are annotated at the step of their decisive error via consensus among multiple LLM judges. Built on that, we develop AgentForesight-7B, a compact online auditor trained with a coarse-to-fine reinforcement learning recipe that first equips it with a risk-anticipation prior at the failure boundary on adjacent safe/unsafe prefix pairs, then sharpens this prior into precise step-level localization under a three-axis reward jointly targeting the what, where, and who of an audit verdict. Across AFTraj-2K and an external Who\&When benchmark, AgentForesight-7B outperforms leading proprietary models, including GPT-4.1 and DeepSeek-V4-Pro, achieving up to +19.9% performance gain and 3times lower step localization error, opening the loop from post-hoc failures detection to enabling deployment-time intervention. Project page: https://zbox1005.github.io/agent-foresight/

Large language model-driven multi-agent systems (LLM-MAS) excel at complex tasks, yet unreliable agents remain a key bottleneck to system-level reliability. Automatic failure attribution is therefore critical, but existing approaches, such as direct prediction of agent-error pairs and agent-first failure attribution, rely on local logs of agents and miss global failures that only manifest over full interaction trajectories, such as cross-step inconsistencies and inter-agent coordination errors. Moreover, directly predicting failures induces a large combinatorial search space, hindering fine-grained attribution. To address these challenges, we propose VerifyMAS, a hypothesis verification framework for agent failure attribution. Instead of directly predicting faulty agents and error types, VerifyMAS formulates and verifies failure hypotheses against full trajectories. This verification-based approach decomposes attribution into trajectory-level error validation and fine-grained agent localization, providing an error-first attribution approach that captures global failure patterns while substantially reducing the search space. We further introduce a hypothesis-based data construction strategy grounded in a structured error taxonomy and fine-tune a specialized LLM verifier model for trajectory-level failure verification and agent attribution. Experiments on Aegis-Bench and Who&When show that VerifyMAS consistently improves diverse backbone models, including open-source Qwen and API-based GPT models, outperforming prior methods without sacrificing inference efficiency for long multi-agent trajectories.

Large language model (LLM) agents offer a promising data-driven approach to automating Site Reliability Engineering (SRE), yet their enterprise deployment is constrained by three challenges: restricted access to proprietary data, unsafe action execution under permission-governed environments, and the inability of closed systems to improve from failures. We present AOI (Autonomous Operations Intelligence), a trainable multi-agent framework formulating automated operations as a structured trajectory learning problem under security constraints. Our approach integrates three key components. First, a trainable diagnostic system applies Group Relative Policy Optimization (GRPO) to distill expert-level knowledge into locally deployed open-source models, enabling preference-based learning without exposing sensitive data. Second, a read-write separated execution architecture decomposes operational trajectories into observation, reasoning, and action phases, allowing safe learning while preventing unauthorized state mutation. Third, a Failure Trajectory Closed-Loop Evolver mines unsuccessful trajectories and converts them into corrective supervision signals, enabling continual data augmentation. Evaluated on the AIOpsLab benchmark, our contributions yield cumulative gains. (1) The AOI runtime alone achieves 66.3% best@5 success on all 86 tasks, outperforming the prior state-of-the-art (41.9%) by 24.4 points. (2) Adding Observer GRPO training, a locally deployed 14B model reaches 42.9% avg@1 on 63 held-out tasks with unseen fault types, surpassing Claude Sonnet 4.5. (3) The Evolver converts 37 failed trajectories into diagnostic guidance, improving end-to-end avg@5 by 4.8 points while reducing variance by 35%.

We present PEAM, a Parametric Embodied Agent Memory framework in Minecraft that transforms agent memory from inference-time retrieval into parameter-resident skills internalized through experience. PEAM pairs a slow deliberative LLM for open-ended reasoning with a fast parametric module for reflexive execution of consolidated skills. The fast module is a multimodal Mixture-of-Experts LoRA architecture with per-category physically isolated adapters, enabling parameter-level continual learning without catastrophic forgetting. We treat failure as a first-class training signal: failure--correction trajectory pairs are internalized through a joint behavioral-cloning and contrastive objective, so the agent learns not only what succeeds but also how corrected actions differ from failed ones. To govern consolidation, PEAM introduces a parameterization-worthiness score for deciding which experience should be internalized, and a scale-free self-triggered consolidation mechanism for deciding when to internalize without task-specific hand-tuned thresholds, making the agent self-evolving as the trigger transfers across task distributions without re-tuning. Experiments in Minecraft show that PEAM improves long-horizon task performance, mitigates forgetting on previously consolidated skills, and improves parametric-versus-retrieval efficiency over retrieval-based embodied agents and parametric memory variants.

Despite the emergence of diffusion large language models (D-LLMs) as an alternative to autoregressive large language models (AR-LLMs), safety monitoring for D-LLMs remains largely unexplored. Unlike AR-LLMs, D-LLMs generate text through a multi-step denoising process, exposing intermediate hidden representations that may contain safety-relevant information unavailable in standard single-step monitoring setups. Motivated by the suitability of lightweight probes for always-on monitoring, we analyze which trajectory-level signals best indicate when such probes are likely to struggle. We find that the most informative signal is safety hesitation: intermediate hidden states repeatedly falling within a small margin of the probe's decision boundary. The number of such hesitation steps in D-LLM's trajectory predicts probe failure effectively, providing a proxy of sample difficulty. Building on this analysis, we propose D^2-Monitor, a bi-level safety monitor for D-LLMs. D^2-Monitor adopts a lightweight probe as an always-on monitor to jointly estimate hesitation and perform base classification. When the hesitation level exceeds a threshold, a more expressive but computationally heavier probe is activated. This dynamic routing mechanism allocates monitoring resources efficiently at test time. Evaluated on 3 datasets (WildguardMix, ToxicChat, OpenAI-Moderation) across 4 D-LLMs, D^2-Monitor achieves state-of-the-art performance with a compact parameter footprint (leq 0.85M parameters), and exhibits the best trade-off between effectiveness and efficiency relative to 8 baselines.

Existing LLMs exhibit remarkable performance on various NLP tasks, but still struggle with complex real-world tasks, even equipped with advanced strategies like CoT and ReAct. In this work, we propose the CoAct framework, which transfers the hierarchical planning and collaboration patterns in human society to LLM systems. Specifically, our CoAct framework involves two agents: (1) A global planning agent, to comprehend the problem scope, formulate macro-level plans and provide detailed sub-task descriptions to local execution agents, which serves as the initial rendition of a global plan. (2) A local execution agent, to operate within the multi-tier task execution structure, focusing on detailed execution and implementation of specific tasks within the global plan. Experimental results on the WebArena benchmark show that CoAct can re-arrange the process trajectory when facing failures, and achieves superior performance over baseline methods on long-horizon web tasks. Code is available at https://github.com/xmhou2002/CoAct.

Large language model (LLM)-based agents increasingly rely on tool use to complete real-world tasks. While existing works evaluate the LLMs' tool use capability, they largely focus on the final answers yet overlook the detailed tool usage trajectory, i.e., whether tools are selected, parameterized, and ordered correctly. We introduce TRAJECT-Bench, a trajectory-aware benchmark to comprehensively evaluate LLMs' tool use capability through diverse tasks with fine-grained evaluation metrics. TRAJECT-Bench pairs high-fidelity, executable tools across practical domains with tasks grounded in production-style APIs, and synthesizes trajectories that vary in breadth (parallel calls) and depth (interdependent chains). Besides final accuracy, TRAJECT-Bench also reports trajectory-level diagnostics, including tool selection and argument correctness, and dependency/order satisfaction. Analyses reveal failure modes such as similar tool confusion and parameter-blind selection, and scaling behavior with tool diversity and trajectory length where the bottleneck of transiting from short to mid-length trajectories is revealed, offering actionable guidance for LLMs' tool use.

AI agents often fail in ways that are difficult to localize because executions are probabilistic, long-horizon, multi-agent, and mediated by noisy tool outputs. We address this gap by manually annotating failed agent runs and release a novel benchmark of 115 failed trajectories spanning structured API workflows, incident management, and open-ended web/file tasks. Each trajectory is annotated with a critical failure step and a category from a grounded-theory derived, cross-domain failure taxonomy. To mitigate the human cost of failure attribution, we present AGENTRX, an automated domain-agnostic diagnostic framework that pinpoints the critical failure step in a failed agent trajectory. It synthesizes constraints, evaluates them step-by-step, and produces an auditable validation log of constraint violations with associated evidence; an LLM-based judge uses this log to localize the critical step and category. Our framework improves step localization and failure attribution over existing baselines across three domains.

Tool-using LLM agents fail through trajectories rather than only final responses, as they may execute unsafe tool calls, follow injected instructions, comply with harmful requests, or over-refuse benign tasks despite producing a seemingly safe answer. Existing safety-alignment signals are largely response-level or off-policy, and often incur a safety-utility trade-off: improving agent safety comes at the cost of degraded task performance. Such sparse and single-objective rewards severely limit real-world usability. To bridge this gap, we propose FATE, an on-policy self-evolving framework that transforms verifier-scored failures into repair supervision without expert demonstrations. For each failure, the same policy proposes repair candidates, which are then re-scored by verifiers and filtered across security, utility, over-refusal control, and trajectory validity. This dense trajectory-level information is then used as a supervision signal for agent self-evolution. During this process, we further introduce Pareto-Front Policy Optimization (PFPO), combining supervised warmup with Pareto-aware policy optimization to preserve safety-utility trade-offs. Experiments on AgentDojo, AgentHarm, and ATBench show that FATE improves safety across different models and scales while preserving useful behavior. Compared with strong baselines, FATE reduces attack success rate by 33.5%, harmful compliance by 82.6%, and improves external trajectory-safety diagnosis by 6.5%. These results suggest that failed trajectories can provide structured repair supervision for safer self-evolving agents.

Large Language Models (LLMs) are increasingly deployed as autonomous agents that reason, use tools, and act over multiple steps. Yet most hallucination benchmarks still evaluate only the final output, missing failures that originate in intermediate Thought-Action-Observation steps. We present Trajel, a dataset and evaluation framework for auditing trajectory-level hallucinations in multi-agent industrial workflows. Trajel introduces a five-type hallucination taxonomy (factual, referential, logical, procedural, and scope-based) over expert-annotated agent traces from AssetOpsBench. We benchmark supervised detection models at the subtask, trajectory, and long-context levels. Our results show that the most common failure modes are missed by existing benchmarks, that nearly half of hallucinated trajectories involve multiple types at once, and that automated detectors with high binary accuracy still misclassify the subtlest types. Trajectory-aware detection significantly outperforms standard post-hoc verification, making taxonomy-grounded evaluation necessary for safer agentic deployment.

Vision-Language-Action (VLA) models enable robots to follow natural language instructions and generalize across diverse tasks, but they remain vulnerable to execution failures that compromise reliability in real-world deployment. Detecting such failures during execution is therefore critical for the robust deployment of embodied systems. Existing failure detection methods either rely on expensive action resampling or external models, while alternatives propagate trajectory-level labels uniformly across every timestep, obscuring localized failure signals. In this paper, we propose Hide-and-Seek, a framework that formulates VLA failure detection as a coarsely supervised learning problem. By combining inter-trajectory and intra-trajectory contrastive objectives, Hide-and-Seek localizes failure-indicative actions and induces temporally structured failure signals from trajectory-level supervision alone, without any step-level annotation. We evaluate Hide-and-Seek on LIBERO, VLABench, and a real-world robotic platform across three representative VLA policies: OpenVLA, π_0, and π_{0.5}.Our method achieves state-of-the-art multi-task failure detection performance with a practical accuracy--timeliness trade-off under conformal prediction, and generalizes well to both seen and unseen tasks.

We present KITE, a training-free, keyframe-anchored, layout-grounded front-end that converts long robot-execution videos into compact, interpretable tokenized evidence for vision-language models (VLMs). KITE distills each trajectory into a small set of motion-salient keyframes with open-vocabulary detections and pairs each keyframe with a schematic bird's-eye-view (BEV) representation that encodes relative object layout, axes, timestamps, and detection confidence. These visual cues are serialized with robot-profile and scene-context tokens into a unified prompt, allowing the same front-end to support failure detection, identification, localization, explanation, and correction with an off-the-shelf VLM. On the RoboFAC benchmark, KITE with Qwen2.5-VL substantially improves over vanilla Qwen2.5-VL in the training-free setting, with especially large gains on simulation failure detection, identification, and localization, while remaining competitive with a RoboFAC-tuned baseline. A small QLoRA fine-tune further improves explanation and correction quality. We also report qualitative results on real dual-arm robots, demonstrating the practical applicability of KITE as a structured and interpretable front-end for robot failure analysis. Code and models are released on our project page: https://m80hz.github.io/kite/

LLM-powered agents face a persistent challenge: learning from their execution experiences to improve future performance. While agents can successfully complete many tasks, they often repeat inefficient patterns, fail to recover from similar errors, and miss opportunities to apply successful strategies from past executions. We present a novel framework for automatically extracting actionable learnings from agent execution trajectories and utilizing them to improve future performance through contextual memory retrieval. Our approach comprises four components: (1) a Trajectory Intelligence Extractor that performs semantic analysis of agent reasoning patterns, (2) a Decision Attribution Analyzer that identifies which decisions and reasoning steps led to failures, recoveries, or inefficiencies, (3) a Contextual Learning Generator that produces three types of guidance -- strategy tips from successful patterns, recovery tips from failure handling, and optimization tips from inefficient but successful executions, and (4) an Adaptive Memory Retrieval System that injects relevant learnings into agent prompts based on multi-dimensional similarity. Unlike existing memory systems that store generic conversational facts, our framework understands execution patterns, extracts structured learnings with provenance, and retrieves guidance tailored to specific task contexts. Evaluation on the AppWorld benchmark demonstrates consistent improvements, with up to 14.3 percentage point gains in scenario goal completion on held-out tasks and particularly strong benefits on complex tasks (28.5~pp scenario goal improvement, a 149\% relative increase).

Large Language Model Powered Multi-Agent Systems (MASs) are increasingly employed to automate complex real-world problems, such as programming and scientific discovery. Despite their promising, MASs are not without their flaws. However, failure attribution in MASs - pinpointing the specific agent actions responsible for failures - remains underexplored and labor-intensive, posing significant challenges for debugging and system improvement. To bridge this gap, we propose FAMAS, the first spectrum-based failure attribution approach for MASs, which operates through systematic trajectory replay and abstraction, followed by spectrum analysis.The core idea of FAMAS is to estimate, from variations across repeated MAS executions, the likelihood that each agent action is responsible for the failure. In particular, we propose a novel suspiciousness formula tailored to MASs, which integrates two key factor groups, namely the agent behavior group and the action behavior group, to account for the agent activation patterns and the action activation patterns within the execution trajectories of MASs. Through expensive evaluations against 12 baselines on the Who and When benchmark, FAMAS demonstrates superior performance by outperforming all the methods in comparison.

Evaluating the safety of LLM-based agents is increasingly important because risks in realistic deployments often emerge over multi-step interactions rather than isolated prompts or final responses. Existing trajectory-level benchmarks remain limited by insufficient interaction diversity, coarse observability of safety failures, and weak long-horizon realism. We introduce ATBench, a trajectory-level benchmark for structured, diverse, and realistic evaluation of agent safety. ATBench organizes agentic risk along three dimensions: risk source, failure mode, and real-world harm. Based on this taxonomy, we construct trajectories with heterogeneous tool pools and a long-context delayed-trigger protocol that captures realistic risk emergence across multiple stages. The benchmark contains 1,000 trajectories (503 safe and 497 unsafe), averaging 9.01 turns and 3.95k tokens, with 1,954 invoked tools drawn from pools spanning 2,084 available tools. Data quality is supported by rule-based and LLM-based filtering plus full human audit. Experiments on frontier LLMs, open-source models, and specialized guard systems show that ATBench is challenging even for strong evaluators, while enabling taxonomy-stratified analysis, cross-benchmark comparison, and diagnosis of long-horizon failure patterns.

Large reasoning models (LRMs) increasingly expose chain-of-thought-like reasoning for transparency, verification, and deliberate problem solving. This creates a safety blind spot: harmful or policy-violating content may appear in reasoning traces even when final answers appear safe. We test whether final-answer safety is a sufficient proxy for the full reasoning-answer trajectory by scoring both stages under a unified twenty-principle safety rubric. Using prompts from seven public harmfulness and jailbreak sources, plus four out-of-distribution (OOD) sources, we evaluate 15 open-weight and API-based LRMs across 41K prompts per model. Reasoning traces consistently reveal additional safety risks beyond final answers, especially in high-severity stage-wise failures: leak cases, where unsafe reasoning precedes a safe-looking answer, and escape cases, where benign-looking reasoning precedes an unsafe final response. Principle-level analysis shows that risk concentrates in misinformation, legal compliance, discrimination, physical harm, and psychological harm. We further propose adaptive multi-principle steering, a white-box test-time mitigation that learns one unsafe-to-safe activation direction per safety principle and activates only directions whose current hidden state is closer to the unsafe than safe centroid. On three steerable open reasoning models, adaptive steering reduces unsafe counts in both reasoning traces and final answers on held-out and OOD benchmarks. DeepSeek-R1-Qwen-7B achieves a 40.8% average unsafe-count reduction while retaining 97.7% macro-averaged accuracy on BBH, GSM8K, and MMLU. These results suggest that LRM safety should be evaluated and mitigated over the full exposed reasoning-answer trajectory, not only at the final-answer stage.

Reinforcement Learning from Verifiable Rewards (RLVR) has emerged as a powerful paradigm for enhancing the complex reasoning capabilities of Large Reasoning Models. However, standard outcome-based supervision suffers from a critical limitation that penalizes trajectories that are largely correct but fail due to several missteps as heavily as completely erroneous ones. This coarse feedback signal causes the model to discard valuable largely correct rollouts, leading to a degradation in rollout diversity that prematurely narrows the exploration space. Process Reward Models have demonstrated efficacy in providing reliable step-wise verification for test-time scaling, naively integrating these signals into RLVR as dense rewards proves ineffective.Prior methods attempt to introduce off-policy guided whole-trajectory replacement that often outside the policy model's distribution, but still fail to utilize the largely correct rollouts generated by the model itself and thus do not effectively mitigate the narrowing of the exploration space. To address these issues, we propose SCOPE (Step-wise Correction for On-Policy Exploration), a novel framework that utilizes Process Reward Models to pinpoint the first erroneous step in suboptimal rollouts and applies fine-grained, step-wise off-policy rectification. By applying precise refinement on partially correct rollout, our method effectively salvages partially correct trajectories and increases diversity score by 13.5%, thereby sustaining a broad exploration space. Extensive experiments demonstrate that our approach establishes new state-of-the-art results, achieving an average accuracy of 46.6% on math reasoning and exhibiting robust generalization with 53.4% accuracy on out-of-distribution reasoning tasks.

Autonomous LLM agents generate multi-step action plans that can fail due to contextual misalignment or structural incoherence. Existing anomaly detection methods are ill-suited for this challenge: mean-pooling embeddings dilutes anomalous steps, while contrastive-only approaches ignore sequential structure. Standard unsupervised methods on pre-trained embeddings achieve F1-scores no higher than 0.69. We introduce Trajectory Guard, a Siamese Recurrent Autoencoder with a hybrid loss function that jointly learns task-trajectory alignment via contrastive learning and sequential validity via reconstruction. This dual objective enables unified detection of both "wrong plan for this task" and "malformed plan structure." On benchmarks spanning synthetic perturbations and real-world failures from security audits (RAS-Eval) and multi-agent systems (Who\&When), we achieve F1-scores of 0.88-0.94 on balanced sets and recall of 0.86-0.92 on imbalanced external benchmarks. At 32 ms inference latency, our approach runs 17-27times faster than LLM Judge baselines, enabling real-time safety verification in production deployments.

Clawdbot is a self-hosted, tool-using personal AI agent with a broad action space spanning local execution and web-mediated workflows, which raises heightened safety and security concerns under ambiguity and adversarial steering. We present a trajectory-centric evaluation of Clawdbot across six risk dimensions. Our test suite samples and lightly adapts scenarios from prior agent-safety benchmarks (including ATBench and LPS-Bench) and supplements them with hand-designed cases tailored to Clawdbot's tool surface. We log complete interaction trajectories (messages, actions, tool-call arguments/outputs) and assess safety using both an automated trajectory judge (AgentDoG-Qwen3-4B) and human review. Across 34 canonical cases, we find a non-uniform safety profile: performance is generally consistent on reliability-focused tasks, while most failures arise under underspecified intent, open-ended goals, or benign-seeming jailbreak prompts, where minor misinterpretations can escalate into higher-impact tool actions. We supplemented the overall results with representative case studies and summarized the commonalities of these cases, analyzing the security vulnerabilities and typical failure modes that Clawdbot is prone to trigger in practice.

Agentic applications based on large language models increasingly rely on multi-step interaction loops involving planning, action execution, and environment feedback. While such systems are now deployed at scale, improving them post-deployment remains challenging. Agent trajectories are voluminous and non-deterministic, and reviewing each one, whether through human review or auxiliary LLMs, is slow and cost-prohibitive. We propose a lightweight, signal-based framework for triaging agentic interaction trajectories. Our approach computes cheap, broadly applicable signals from live interactions and attaches them as structured attributes for trajectory triage, identifying interactions likely to be informative without affecting online agent behavior. We organize signals into a coarse-grained taxonomy spanning interaction (misalignment, stagnation, disengagement, satisfaction), execution (failure, loop), and environment (exhaustion), designed for computation without model calls. In a controlled annotation study on τ-bench, a widely used benchmark for tool-augmented agent evaluation, we show that signal-based sampling achieves an 82\% informativeness rate compared to 74\% for heuristic filtering and 54\% for random sampling, with a 1.52x efficiency gain per informative trajectory. The advantage is robust across reward strata and task domains, confirming that signals provide genuine per-trajectory informativeness gains rather than merely oversampling obvious failures. These results show that lightweight signals can serve as practical sampling infrastructure for agentic systems, and suggest a path toward preference data construction and post-deployment optimization.

In classical Reinforcement Learning from Human Feedback (RLHF), Reward Models (RMs) serve as the fundamental signal provider for model alignment. As Large Language Models evolve into agentic systems capable of autonomous tool invocation and complex reasoning, the paradigm of reward modeling faces unprecedented challenges--most notably, the lack of benchmarks specifically designed to assess RM capabilities within tool-integrated environments. To address this gap, we present Plan-RewardBench, a trajectory-level preference benchmark designed to evaluate how well judges distinguish preferred versus distractor agent trajectories in complex tool-using scenarios. Plan-RewardBench covers four representative task families -- (i) Safety Refusal, (ii) Tool-Irrelevance / Unavailability, (iii) Complex Planning, and (iv) Robust Error Recovery -- comprising validated positive trajectories and confusable hard negatives constructed via multi-model natural rollouts, rule-based perturbations, and minimal-edit LLM perturbations. We benchmark representative RMs (generative, discriminative, and LLM-as-Judge) under a unified pairwise protocol, reporting accuracy trends across varying trajectory lengths and task categories. Furthermore, we provide diagnostic analyses of prevalent failure modes. Our results reveal that all three evaluator families face substantial challenges, with performance degrading sharply on long-horizon trajectories, underscoring the necessity for specialized training in agentic, trajectory-level reward modeling. Ultimately, Plan-RewardBench aims to serve as both a practical evaluation suite and a reusable blueprint for constructing agentic planning preference data.

Large Language Models (LLMs) have become integral components in various autonomous agent systems. In this study, we present an exploration-based trajectory optimization approach, referred to as ETO. This learning method is designed to enhance the performance of open LLM agents. Contrary to previous studies that exclusively train on successful expert trajectories, our method allows agents to learn from their exploration failures. This leads to improved performance through an iterative optimization framework. During the exploration phase, the agent interacts with the environment while completing given tasks, gathering failure trajectories to create contrastive trajectory pairs. In the subsequent training phase, the agent utilizes these trajectory preference pairs to update its policy using contrastive learning methods like DPO. This iterative cycle of exploration and training fosters continued improvement in the agents. Our experiments on three complex tasks demonstrate that ETO consistently surpasses baseline performance by a large margin. Furthermore, an examination of task-solving efficiency and potential in scenarios lacking expert trajectory underscores the effectiveness of our approach.

As agent systems move into increasingly diverse execution settings, trajectory-level safety evaluation and diagnosis require benchmarks that evolve with them. ATBench is a diverse and realistic agent trajectory benchmark for safety evaluation and diagnosis. This report presents ATBench-Claw and ATBench-CodeX, two domain-customized extensions that carry ATBench into the OpenClaw and OpenAI Codex / Codex-runtime settings. The key adaptation mechanism is to analyze each new setting, customize the three-dimensional Safety Taxonomy over risk source, failure mode, and real-world harm, and then use that customized taxonomy to define the benchmark specification consumed by the shared ATBench construction pipeline. This extensibility matters because agent frameworks remain relatively stable at the architectural level even as their concrete execution settings, tool ecosystems, and product capabilities evolve quickly. Concretely, ATBench-Claw targets OpenClaw-sensitive execution chains over tools, skills, sessions, and external actions, while ATBench-CodeX targets trajectories in the OpenAI Codex / Codex-runtime setting over repositories, shells, patches, dependencies, approvals, and runtime policy boundaries. Our emphasis therefore falls on taxonomy customization, domain-specific risk coverage, and benchmark design under a shared ATBench generation framework.

Executing complex terminal tasks remains a significant challenge for open-weight LLMs, constrained by two fundamental limitations. First, high-fidelity, executable training environments are scarce: environments synthesized from real-world repositories are not diverse and scalable, while trajectories synthesized by LLMs suffer from hallucinations. Second, standard instruction tuning uses expert trajectories that rarely exhibit simple mistakes common to smaller models. This creates a distributional mismatch, leaving student models ill-equipped to recover from their own runtime failures. To bridge these gaps, we introduce TermiGen, an end-to-end pipeline for synthesizing verifiable environments and resilient expert trajectories. Termi-Gen first generates functionally valid tasks and Docker containers via an iterative multi-agent refinement loop. Subsequently, we employ a Generator-Critic protocol that actively injects errors during trajectory collection, synthesizing data rich in error-correction cycles. Fine-tuned on this TermiGen-generated dataset, our TermiGen-Qwen2.5-Coder-32B achieves a 31.3% pass rate on TerminalBench. This establishes a new open-weights state-of-the-art, outperforming existing baselines and notably surpassing capable proprietary models such as o4-mini. Dataset is avaiable at https://github.com/ucsb-mlsec/terminal-bench-env.

LLM-based deep research agents are largely built on the ReAct framework. This linear design makes it difficult to revisit earlier states, branch into alternative search directions, or maintain global awareness under long contexts, often leading to local optima, redundant exploration, and inefficient search. We propose Re-TRAC, an agentic framework that performs cross-trajectory exploration by generating a structured state representation after each trajectory to summarize evidence, uncertainties, failures, and future plans, and conditioning subsequent trajectories on this state representation. This enables iterative reflection and globally informed planning, reframing research as a progressive process. Empirical results show that Re-TRAC consistently outperforms ReAct by 15-20% on BrowseComp with frontier LLMs. For smaller models, we introduce Re-TRAC-aware supervised fine-tuning, achieving state-of-the-art performance at comparable scales. Notably, Re-TRAC shows a monotonic reduction in tool calls and token usage across rounds, indicating progressively targeted exploration driven by cross-trajectory reflection rather than redundant search.

Large language models (LLMs) have made impressive strides in mathematical reasoning, often fine-tuned using rejection sampling that retains only correct reasoning trajectories. While effective, this paradigm treats supervision as a binary filter that systematically excludes teacher-generated errors, leaving a gap in how reasoning failures are modeled during training. In this paper, we propose TrajFusion, a fine-tuning strategy that reframes rejection sampling as a structured supervision construction process. Specifically, TrajFusion forms fused trajectories that explicitly model trial-and-error reasoning by interleaving selected incorrect trajectories with reflection prompts and correct trajectories. The length of each fused sample is adaptively controlled based on the frequency and diversity of teacher errors, providing richer supervision for challenging problems while safely reducing to vanilla rejection sampling fine-tuning (RFT) when error signals are uninformative. TrajFusion requires no changes to the architecture or training objective. Extensive experiments across multiple math benchmarks demonstrate that TrajFusion consistently outperforms RFT, particularly on challenging and long-form reasoning problems.

Large Language Models (LLMs) have recently shown promise as high-level planners for robots when given access to a selection of low-level skills. However, it is often assumed that LLMs do not possess sufficient knowledge to be used for the low-level trajectories themselves. In this work, we address this assumption thoroughly, and investigate if an LLM (GPT-4) can directly predict a dense sequence of end-effector poses for manipulation skills, when given access to only object detection and segmentation vision models. We study how well a single task-agnostic prompt, without any in-context examples, motion primitives, or external trajectory optimisers, can perform across 26 real-world language-based tasks, such as "open the bottle cap" and "wipe the plate with the sponge", and we investigate which design choices in this prompt are the most effective. Our conclusions raise the assumed limit of LLMs for robotics, and we reveal for the first time that LLMs do indeed possess an understanding of low-level robot control sufficient for a range of common tasks, and that they can additionally detect failures and then re-plan trajectories accordingly. Videos, code, and prompts are available at: https://www.robot-learning.uk/language-models-trajectory-generators.

General-purpose robot reward models are typically trained to predict absolute task progress from expert demonstrations, providing only local, frame-level supervision. While effective for expert demonstrations, this paradigm scales poorly to large-scale robotics datasets where failed and suboptimal trajectories are abundant and assigning dense progress labels is ambiguous. We introduce Robometer, a scalable reward modeling framework that combines intra-trajectory progress supervision with inter-trajectory preference supervision. Robometer is trained with a dual objective: a frame-level progress loss that anchors reward magnitude on expert data, and a trajectory-comparison preference loss that imposes global ordering constraints across trajectories of the same task, enabling effective learning from both real and augmented failed trajectories. To support this formulation at scale, we curate RBM-1M, a reward-learning dataset comprising over one million trajectories spanning diverse robot embodiments and tasks, including substantial suboptimal and failure data. Across benchmarks and real-world evaluations, Robometer learns more generalizable reward functions than prior methods and improves robot learning performance across a diverse set of downstream applications. Code, model weights, and videos at https://robometer.github.io/.

Robotic manipulation in open-world settings requires not only task execution but also the ability to detect and learn from failures. While recent advances in vision-language models (VLMs) and large language models (LLMs) have improved robots' spatial reasoning and problem-solving abilities, they still struggle with failure recognition, limiting their real-world applicability. We introduce AHA, an open-source VLM designed to detect and reason about failures in robotic manipulation using natural language. By framing failure detection as a free-form reasoning task, AHA identifies failures and provides detailed, adaptable explanations across different robots, tasks, and environments. We fine-tuned AHA using FailGen, a scalable framework that generates the first large-scale dataset of robotic failure trajectories, the AHA dataset. FailGen achieves this by procedurally perturbing successful demonstrations from simulation. Despite being trained solely on the AHA dataset, AHA generalizes effectively to real-world failure datasets, robotic systems, and unseen tasks. It surpasses the second-best model (GPT-4o in-context learning) by 10.3% and exceeds the average performance of six compared models including five state-of-the-art VLMs by 35.3% across multiple metrics and datasets. We integrate AHA into three manipulation frameworks that utilize LLMs/VLMs for reinforcement learning, task and motion planning, and zero-shot trajectory generation. AHA's failure feedback enhances these policies' performances by refining dense reward functions, optimizing task planning, and improving sub-task verification, boosting task success rates by an average of 21.4% across all three tasks compared to GPT-4 models.

Failure attribution in multi-agent systems -- pinpointing the exact step where a decisive error occurs -- is a critical yet unsolved challenge. Current methods treat this as a pattern recognition task over long conversation logs, leading to critically low step-level accuracy (below 17\%), which renders them impractical for debugging complex systems. Their core weakness is a fundamental inability to perform robust counterfactual reasoning: to determine if correcting a single action would have actually averted the task failure. To bridge this counterfactual inference gap, we introduce Abduct-Act-Predict (A2P) Scaffolding, a novel agent framework that transforms failure attribution from pattern recognition into a structured causal inference task. A2P explicitly guides a large language model through a formal three-step reasoning process within a single inference pass: (1) Abduction, to infer the hidden root causes behind an agent's actions; (2) Action, to define a minimal corrective intervention; and (3) Prediction, to simulate the subsequent trajectory and verify if the intervention resolves the failure. This structured approach leverages the holistic context of the entire conversation while imposing a rigorous causal logic on the model's analysis. Our extensive experiments on the Who\&When benchmark demonstrate its efficacy. On the Algorithm-Generated dataset, A2P achieves 47.46\% step-level accuracy, a 2.85times improvement over the 16.67\% of the baseline. On the more complex Hand-Crafted dataset, it achieves 29.31\% step accuracy, a 2.43times improvement over the baseline's 12.07\%. By reframing the problem through a causal lens, A2P Scaffolding provides a robust, verifiable, and significantly more accurate solution for automated failure attribution. Ours code are released at https://github.com/ResearAI/A2P.

LLM-based agents depend on effective tool-use policies to solve complex tasks, yet optimizing these policies remains challenging due to delayed supervision and the difficulty of credit assignment in long-horizon trajectories. Existing optimization approaches tend to be either monolithic, which are prone to entangling behaviors, or single-aspect, which ignore cross-module error propagation. To address these limitations, we propose EvoTool, a self-evolving framework that optimizes a modular tool-use policy via a gradient-free evolutionary paradigm. EvoTool decomposes agent's tool-use policy into four modules, including Planner, Selector, Caller, and Synthesizer, and iteratively improves them in a self-improving loop through three novel mechanisms. Trajectory-Grounded Blame Attribution uses diagnostic traces to localize failures to a specific module. Feedback-Guided Targeted Mutation then edits only that module via natural-language critique. Diversity-Aware Population Selection preserves complementary candidates to ensure solution diversity. Across four benchmarks, EvoTool outperforms strong baselines by over 5 points on both GPT-4.1 and Qwen3-8B, while achieving superior efficiency and transferability. The code will be released once paper is accepted.

We introduce LLM-Wikirace, a benchmark for evaluating planning, reasoning, and world knowledge in large language models (LLMs). In LLM-Wikirace, models must efficiently navigate Wikipedia hyperlinks step by step to reach a target page from a given source, requiring look-ahead planning and the ability to reason about how concepts are connected in the real world. We evaluate a broad set of open- and closed-source models, including Gemini-3, GPT-5, and Claude Opus 4.5, which achieve the strongest results on the easy level of the task and demonstrate superhuman performance. Despite this, performance drops sharply on hard difficulty: the best-performing model, Gemini-3, succeeds in only 23\% of hard games, highlighting substantial remaining challenges for frontier models. Our analysis shows that world knowledge is a necessary ingredient for success, but only up to a point, beyond this threshold, planning and long-horizon reasoning capabilities become the dominant factors. Trajectory-level analysis further reveals that even the strongest models struggle to replan after failure, frequently entering loops rather than recovering. LLM-Wikirace is a simple benchmark that reveals clear limitations in current reasoning systems, offering an open arena where planning-capable LLMs still have much to prove. Our code and leaderboard available at https:/llmwikirace.github.io.

Recent advances in language model (LM) agents and function calling have enabled autonomous, feedback-driven systems to solve problems across various digital domains. To better understand the unique limitations of LM agents, we introduce RefactorBench, a benchmark consisting of 100 large handcrafted multi-file refactoring tasks in popular open-source repositories. Solving tasks within RefactorBench requires thorough exploration of dependencies across multiple files and strong adherence to relevant instructions. Every task is defined by 3 natural language instructions of varying specificity and is mutually exclusive, allowing for the creation of longer combined tasks on the same repository. Baselines on RefactorBench reveal that current LM agents struggle with simple compositional tasks, solving only 22% of tasks with base instructions, in contrast to a human developer with short time constraints solving 87%. Through trajectory analysis, we identify various unique failure modes of LM agents, and further explore the failure mode of tracking past actions. By adapting a baseline agent to condition on representations of state, we achieve a 43.9% improvement in solving RefactorBench tasks. We further extend our state-aware approach to encompass entire digital environments and outline potential directions for future research. RefactorBench aims to support the study of LM agents by providing a set of real-world, multi-hop tasks within the realm of code.

Establishing a reliable and iteratively refined robotic system is essential for deploying real-world applications. While Vision-Language-Action (VLA) models are widely recognized as the foundation model for such robotic deployment, their reliance on offline expert demonstrations critically limits their capacity for post-deployment refinement. To mitigate this limitation, we introduce Action Preference Optimization (APO), a method designed to refine VLA models by human-assisted preference alignment gathered through interaction with environments. This method begins with a human-robot collaboration framework for reliable failure correction and interaction trajectory collection through human intervention. However, directly leveraging these interaction trajectories for preference optimization is non-trivial due to the challenges of irreversible robotic actions and token distribution mismatch. To solve this, APO proposes an adaptive reweighting algorithm with binary desirability signals derived from interaction, empowering VLA models effectively suppress failure-prone actions while enhancing corrective action adaptation. Ultimately, APO equips VLA models with the crucial capability to learn from failure, paving the way for their iterative refinement and reliable deployment in dynamic environments. The experiments conducted in simulation and real-world scenarios prove superior generalization and robustness of our human-assisted framework across a variety of manipulation tasks. We believe this work could bring insights for efficient and stable optimization of VLA models through human-robot collaboration. The code and dataset are released at https://github.com/GeWu-Lab/Action-Preference-Optimization

Many reinforcement learning environments (e.g., Minecraft) provide only sparse rewards that indicate task completion or failure with binary values. The challenge in exploration efficiency in such environments makes it difficult for reinforcement-learning-based agents to learn complex tasks. To address this, this paper introduces an advanced learning system, named Auto MC-Reward, that leverages Large Language Models (LLMs) to automatically design dense reward functions, thereby enhancing the learning efficiency. Auto MC-Reward consists of three important components: Reward Designer, Reward Critic, and Trajectory Analyzer. Given the environment information and task descriptions, the Reward Designer first design the reward function by coding an executable Python function with predefined observation inputs. Then, our Reward Critic will be responsible for verifying the code, checking whether the code is self-consistent and free of syntax and semantic errors. Further, the Trajectory Analyzer summarizes possible failure causes and provides refinement suggestions according to collected trajectories. In the next round, Reward Designer will further refine and iterate the dense reward function based on feedback. Experiments demonstrate a significant improvement in the success rate and learning efficiency of our agents in complex tasks in Minecraft, such as obtaining diamond with the efficient ability to avoid lava, and efficiently explore trees and animals that are sparse in the plains biome.

Diffusion and flow matching models have emerged as powerful robot policies, enabling Vision-Language-Action (VLA) models to generalize across diverse scenes and instructions. Yet, when trained via imitation learning, their high generative capacity makes them sensitive to noise in human demonstrations: jerks, pauses, and jitter which reduce action coherence. Reduced action coherence causes instability and trajectory drift during deployment, failures that are catastrophic in fine-grained manipulation where precision is crucial. In this paper, we present Action Coherence Guidance (ACG) for VLA models, a training-free test-time guidance algorithm that improves action coherence and thereby yields performance gains. Evaluated on RoboCasa, DexMimicGen, and real-world SO-101 tasks, ACG consistently improves action coherence and boosts success rates across diverse manipulation tasks. Code and project page are available at https://github.com/DAVIAN-Robotics/ACG and https://DAVIAN-Robotics.github.io/ACG , respectively.

Long-horizon robotic manipulation requires dense feedback that reflects how a task advances through its procedural stages, not merely whether the final outcome is successful. Existing reward models often rely on trajectory-level success labels or time-based interpolation, which can conflate elapsed time with true task progress and therefore fail to capture unfinished steps, stagnation, and failure states. We present ProcVLM, a progress-aware vision-language model that learns procedure-grounded progress as a dense reward signal for manipulation. Rather than deriving progress from terminal outcomes or temporal proxies, ProcVLM grounds progress estimation in procedural structure and intra-stage visual change, and further adopts a reasoning-before-estimation paradigm that infers the remaining atomic actions before estimating task progress. Specifically, we construct this supervision by synthesizing frame-level subtask-semantic annotations, assigning progress budgets according to subtask structure, and distributing each budget based on intra-subtask visual change. To train ProcVLM at scale, we build a standardized procedural supervision synthesis pipeline and construct ProcCorpus-60M from 30 embodied datasets with 60M annotated frames, from which we derive ProcVQA for procedure-aware pretraining, with progress estimation as the central task alongside action segmentation and future planning. Experiments on ProcVQA and reward-model benchmarks show that ProcVLM improves embodied procedural reasoning and yields more discriminative trajectory-internal progress estimates than representative baselines, supporting its use as a dense reward model for downstream reward-guided policy optimization. Project page: https://procvlm.github.io/

Vision-Language Models (VLMs) are increasingly deployed as autonomous agents to navigate mobile graphical user interfaces (GUIs). Operating in dynamic on-device ecosystems, which include notifications, pop-ups, and inter-app interactions, exposes them to a unique and underexplored threat vector: environmental injection. Unlike prompt-based attacks that manipulate textual instructions, environmental injection corrupts an agent's visual perception by inserting adversarial UI elements (for example, deceptive overlays or spoofed notifications) directly into the GUI. This bypasses textual safeguards and can derail execution, causing privacy leakage, financial loss, or irreversible device compromise. To systematically evaluate this threat, we introduce GhostEI-Bench, the first benchmark for assessing mobile agents under environmental injection attacks within dynamic, executable environments. Moving beyond static image-based assessments, GhostEI-Bench injects adversarial events into realistic application workflows inside fully operational Android emulators and evaluates performance across critical risk scenarios. We further propose a judge-LLM protocol that conducts fine-grained failure analysis by reviewing the agent's action trajectory alongside the corresponding screenshot sequence, pinpointing failure in perception, recognition, or reasoning. Comprehensive experiments on state-of-the-art agents reveal pronounced vulnerability to deceptive environmental cues: current models systematically fail to perceive and reason about manipulated UIs. GhostEI-Bench provides a framework for quantifying and mitigating this emerging threat, paving the way toward more robust and secure embodied agents.

Vision-Language-Action (VLA) models achieve strong performance in robotic manipulation by leveraging pre-trained vision-language backbones. However, in downstream robotic settings, they are typically fine-tuned with limited data, leading to overfitting to specific instruction formulations and leaving robustness to paraphrased instructions underexplored. To study this gap, we introduce LIBERO-Para, a controlled benchmark that independently varies action expressions and object references for fine-grained analysis of linguistic generalization. Across seven VLA configurations (0.6B-7.5B), we observe consistent performance degradation of 22-52 pp under paraphrasing. This degradation is primarily driven by object-level lexical variation: even simple synonym substitutions cause large drops, indicating reliance on surface-level matching rather than semantic grounding. Moreover, 80-96% of failures arise from planning-level trajectory divergence rather than execution errors, showing that paraphrasing disrupts task identification. Binary success rate treats all paraphrases equally, obscuring whether models perform consistently across difficulty levels or rely on easier cases. To address this, we propose PRIDE, a metric that quantifies paraphrase difficulty using semantic and syntactic factors. Our benchmark and corresponding code are available at: https://github.com/cau-hai-lab/LIBERO-Para

LLM agents increasingly run inside execution harnesses that dispatch tools, allocate resources, and route messages between specialized components. However, a harness can return a correct, benign answer over a trajectory that accesses unauthorized resources or leaks context to the wrong agent. Output-level evaluation cannot see these failures, yet most safety benchmarks score only final outputs or terminal states, even though many violations occur mid-trajectory rather than at termination. The central question is whether the harness respects user intent, permission boundaries, and information-flow constraints throughout execution. To address this gap, we propose HarnessAudit, a framework that audits full execution trajectories across boundary compliance, execution fidelity, and system stability, with a focus on multi-agent harnesses where these risks are most pronounced. We further introduce HarnessAudit-Bench, a benchmark of 210 tasks across eight real-world domains, instantiated in both single-agent and multi-agent configurations with embedded safety constraints. Evaluating ten harness configurations across frontier models and three multi-agent frameworks, we find that: (i) task completion is misaligned with safe execution, and violations accumulate with trajectory length; (ii) safety risks vary across domains, task types, and agent roles; (iii) most violations concentrate in resource access and inter-agent information transfer; and (iv) multi-agent collaboration expands the safety risk surface, while harness design sets the upper bound of safe deployment.

Despite the recent advancements of vision-language-action (VLA) models on a variety of robotics tasks, they suffer from critical issues such as poor generalizability to unseen tasks, due to their reliance on behavior cloning exclusively from successful rollouts. Furthermore, they are typically fine-tuned to replicate demonstrations collected by experts under different settings, thus introducing distribution bias and limiting their adaptability to diverse manipulation objectives, such as efficiency, safety, and task completion. To bridge this gap, we introduce GRAPE: Generalizing Robot Policy via Preference Alignment. Specifically, GRAPE aligns VLAs on a trajectory level and implicitly models reward from both successful and failure trials to boost generalizability to diverse tasks. Moreover, GRAPE breaks down complex manipulation tasks to independent stages and automatically guides preference modeling through customized spatiotemporal constraints with keypoints proposed by a large vision-language model. Notably, these constraints are flexible and can be customized to align the model with varying objectives, such as safety, efficiency, or task success. We evaluate GRAPE across a diverse array of tasks in both real-world and simulated environments. Experimental results demonstrate that GRAPE enhances the performance of state-of-the-art VLA models, increasing success rates on in-domain and unseen manipulation tasks by 51.79% and 60.36%, respectively. Additionally, GRAPE can be aligned with various objectives, such as safety and efficiency, reducing collision rates by 44.31% and rollout step-length by 11.15%, respectively. All code, models, and data are available at https://grape-vla.github.io/

Reinforcement learning drives recent advances in LLM reasoning and agentic capabilities, yet current approaches struggle with both exploration and exploitation. Exploration suffers from low success rates on difficult tasks and high costs of repeated rollouts from scratch. Exploitation suffers from coarse credit assignment and training instability: Trajectory-level rewards penalize valid prefixes for later errors, and failure-dominated groups overwhelm the few positive signals, leaving optimization without constructive direction. To this end, we propose R^3L, Reflect-then-Retry Reinforcement Learning with Language-Guided Exploration, Pivotal Credit, and Positive Amplification. To synthesize high-quality trajectories, R^3L shifts from stochastic sampling to active synthesis via reflect-then-retry, leveraging language feedback to diagnose errors, transform failed attempts into successful ones, and reduce rollout costs by restarting from identified failure points. With errors diagnosed and localized, Pivotal Credit Assignment updates only the diverging suffix where contrastive signals exist, excluding the shared prefix from gradient update. Since failures dominate on difficult tasks and reflect-then-retry produces off-policy data, risking training instability, Positive Amplification upweights successful trajectories to ensure positive signals guide the optimization process. Experiments on agentic and reasoning tasks demonstrate 5\% to 52\% relative improvements over baselines while maintaining training stability. Our code is released at https://github.com/shiweijiezero/R3L.

Large language models (LLMs) deployed in real-world agentic applications must be capable of replanning and adapting when mid-task disruptions invalidate their prior decisions. Existing dynamic benchmarks primarily measure whether LLMs can detect temporal changes in a timely manner, leaving the complementary challenge of adaptive replanning under spatio-temporal dynamics largely unexplored. We introduce STT-Arena (Spatio-Temporal Tool-Use Arena), a benchmark of 227 high-quality interactive tasks spanning nine spatio-temporal conflict types and four solvability levels. Each task is grounded in a realistic, executable environment equipped with injected spatio-temporal triggers that can abruptly invalidate an ongoing plan, forcing the model to detect the state shift and construct a revised execution strategy. Extensive evaluation of frontier LLMs reveals that even the SOTA proprietary models, including Claude-4.6-Opus, achieves less than 40\% overall accuracies, highlighting the fundamental difficulty of spatio-temporal dynamic reasoning. Systematic analysis of failure trajectories uncovers three recurring error modes of existing models: Stale-State Execution, Misdiagnosis of Dynamic Triggers, and Missing Post-Adaptation Verification. Guided by these findings, we propose an iterative trajectory refinement technique that eliminates these failure patterns from training data, and combine it with online RL to produce STT-Agent-4B which outperforms frontier LLMs on STT-Arena.

Large language models are increasingly deployed as autonomous agents executing multi-step workflows in real-world software environments. However, existing agent benchmarks suffer from three critical limitations: (1) trajectory-opaque grading that checks only final outputs, (2) underspecified safety and robustness evaluation, and (3) narrow modality coverage and interaction paradigms. We introduce Claw-Eval, an end-to-end evaluation suite addressing all three gaps. It comprises 300 human-verified tasks spanning 9 categories across three groups (general service orchestration, multimodal perception and generation, and multi-turn professional dialogue). Every agent action is recorded through three independent evidence channels (execution traces, audit logs, and environment snapshots), enabling trajectory-aware grading over 2,159 fine-grained rubric items. The scoring protocol evaluates Completion, Safety, and Robustness, reporting Average Score, Pass@k, and Pass^k across three trials to distinguish genuine capability from lucky outcomes. Experiments on 14 frontier models reveal that: (1) trajectory-opaque evaluation is systematically unreliable, missing 44% of safety violations and 13% of robustness failures that our hybrid pipeline catches; (2) controlled error injection primarily degrades consistency rather than peak capability, with Pass^3 dropping up to 24% while Pass@3 remains stable; (3) multimodal performance varies sharply, with most models performing poorer on video than on document or image, and no single model dominating across all modalities. Beyond benchmarking, Claw-Eval highlights actionable directions for agent development, shedding light on what it takes to build agents that are not only capable but reliably deployable.

LLM agents are shaped not only by their language models, but also by the runtime harness that mediates observation, tool use, action execution, feedback interpretation, and trajectory control. While existing agent adaptation methods mainly update model parameters, many failures in deterministic, rule-governed domains stem from mismatches at the model--environment interface. We propose Life-Harness, a lifecycle-aware runtime harness that improves frozen LLM agents without changing model weights or evaluation environments. Life-Harness evolves from training trajectories by converting recurring interaction failures into reusable interventions across environment contracts, procedural skills, action realization, and trajectory regulation, and remains fixed during held-out evaluation. On seven deterministic environments from τ-bench, τ^2-bench, and AgentBench, Life-Harness improves 116 out of 126 model--environment settings across 18 model backbones, with an average relative improvement of 88.5%. Harnesses evolved only from Qwen3-4B-Instruct trajectories transfer to 17 other models, showing that Life-Harness captures reusable environment-side structure rather than model-specific behavior. These results position runtime interface adaptation as a complementary alternative to model-centric agent training. Code is available at GitHub.

Reinforcement learning has become a powerful paradigm for post-training large language model agents, yet credit assignment in multi-turn environments remains a challenge. Agents often receive sparse, trajectory-level rewards only at the end of an episode, making it difficult to determine which intermediate actions contributed to success or failure. As a result, propagating delayed outcomes back to individual decision steps without relying on costly auxiliary value models remains an open problem. We propose Generalized Advantage Grouped Policy Optimization (GAGPO), a critic-free reinforcement learning method for precise, step-aligned temporal credit assignment. GAGPO constructs a non-parametric grouped value proxy from sampled rollouts and uses it to compute TD/GAE-style temporal advantages, recursively propagating outcome supervision backward through time. Combined with group-wise advantage normalization and an action-level importance ratio, GAGPO extracts stable, localized optimization signals directly from multi-turn trajectories. Experiments on ALFWorld and WebShop show that GAGPO outperforms strong reinforcement learning baselines. Further analyses demonstrate faster early-stage learning, improved interaction efficiency, and smoother optimization dynamics, suggesting that GAGPO offers a simple yet effective framework for multi-turn agentic reinforcement learning.

Text-driven video generation has democratized film creation, but camera control in cinematic multi-shot scenarios remains a significant block. Implicit textual prompts lack precision, while explicit trajectory conditioning imposes prohibitive manual overhead and often triggers execution failures in current models. To overcome this bottleneck, we propose a data-centric paradigm shift, positing that aligned (Caption, Trajectory, Video) triplets form an inherent joint distribution that can connect automated plotting and precise execution. Guided by this insight, we present ShotVerse, a "Plan-then-Control" framework that decouples generation into two collaborative agents: a VLM (Vision-Language Model)-based Planner that leverages spatial priors to obtain cinematic, globally aligned trajectories from text, and a Controller that renders these trajectories into multi-shot video content via a camera adapter. Central to our approach is the construction of a data foundation: we design an automated multi-shot camera calibration pipeline aligns disjoint single-shot trajectories into a unified global coordinate system. This facilitates the curation of ShotVerse-Bench, a high-fidelity cinematic dataset with a three-track evaluation protocol that serves as the bedrock for our framework. Extensive experiments demonstrate that ShotVerse effectively bridges the gap between unreliable textual control and labor-intensive manual plotting, achieving superior cinematic aesthetics and generating multi-shot videos that are both camera-accurate and cross-shot consistent.

AI agents are entering high-risk production settings, where they use tools, retain context, follow policies, handle private data, and interact with users over multiple turns. Yet many evaluation methods still judge isolated outputs or static tasks, missing failures that emerge through trajectory, pressure, and adversarial interaction. We introduce ProofAgent Harness, open infrastructure for scalable, auditable, and adversarial AI agent evaluation. The harness provides evaluation infrastructure around an agent: it curates evaluation intelligence, runs adversarial multi-turn trials, captures behavioral traces, applies post-hoc multi-juror scoring, resolves disagreement, and produces evidence-linked reports. Its open design allows developers and researchers to extend domains, traps, metrics, juror personas, scoring rules, and reporting formats. At its core is Adversarial Multi-Juror Scoring with Turn-Level Audit, which evaluates completed agent behavior under pressure using calibrated juror personas, consensus checks, and turn-level evidence. Experiments across customer support, medical triage, privacy and security, and code generation agents show that strong agents fail selectively through weak metrics, fragile turns, unsafe reframing, and manipulation paths. We also find that a small quantized local Harness LLM can challenge production agents powered by best-in-class large LLMs, suggesting that evaluation capability emerges from the full harness pipeline rather than model scale alone. ProofAgent Harness turns AI agent evaluation from a static score into scalable adversarial evaluation infrastructure: repeatable, evidence-backed, extensible, and actionable before deployment.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Reinforcement learning (RL) has emerged as a promising paradigm for inducing explicit reasoning behaviors in large language and vision-language models. However, reasoning-oriented RL post-training remains fundamentally challenging due to sparse trajectory-level rewards, leading to ambiguous credit assignment and severe exploration failures that can trap the policy in a ``learning cliff.'' Recent on-policy distillation methods introduce dense teacher supervision to stabilize optimization, but apply it uniformly across all generated trajectories. We argue that such uniform distillation is ill-suited for reasoning-intensive tasks, as low-quality on-policy trajectories often originate from early logical errors, and distillation under flawed contexts injects noisy and misaligned gradients. To address these challenges, we propose Knowledge-Enhanced Preference Optimization (KEPO), a unified post-training framework that integrates: (i) a quality-gated on-policy distillation objective that selectively applies dense teacher guidance only to high-quality trajectories, and (ii) a knowledge-enhanced exploration strategy that leverages hints learned from a teacher model to rejectively sample reward-positive on-policy trajectories for RL, thereby mitigating exploration collapse. Evaluated on a challenging medical visual question answering benchmark under single-source generalization, KEPO demonstrates improved training stability, more coherent reasoning behaviors, and superior out-of-distribution performance over reinforcement learning and on-policy distillation baselines.

Training long-horizon LLM agents with reinforcement learning is challenging because sparse outcome rewards reveal whether a task succeeds, but not which intermediate actions caused the outcome or how they should be corrected. Recent methods alleviate this issue by generating rewards or textual hints from turn-level action-output signals, or by using feedback-conditioned self-distillation. However, generating feedback at every turn is inefficient when many intermediate turns are already successful or neutral, and applying feedback at a fixed or misaligned turn often fails to supervise the actions that contributed to the failure. To bridge this gap, we propose HINT-SD, a targeted self-distillation framework that uses full-trajectory hindsight to select failure-relevant actions and applies feedback-conditioned distillation only on targeted action spans. Experiments on BFCL v3 and AppWorld show that our method improves over the dense per-turn feedback baseline by up to 18.80 percent while achieving 2.26times lower time per training step, suggesting that selecting where to distill is a key factor for both effective and efficient long-horizon agent training.

Training large language models to reason with search engines via reinforcement learning is hindered by a fundamental credit assignment problem: existing methods such as Search-R1 provide only a sparse outcome reward after an entire multi-step trajectory, making it infeasible to attribute success or failure to individual reasoning and retrieval decisions. Process-reward methods like StepSearch alleviate this by introducing step-level supervision, but rely on heuristic rewards such as TF-IDF overlap with gold documents, and still sample k complete trajectories per example, retaining high gradient variance. We propose SLATE, a framework built on two complementary ideas: (1) truncated step-level sampling, which generates k trajectories that share a common prefix and differ only at the next step, and (2) dense LLM-as-judge rewards, which replace heuristic scoring with a capable LLM evaluator that assesses the quality of each reasoning step, search query, and answer, providing richer and more reliable supervision. We theoretically prove that under the same dense reward structure, truncated sampling reduces the variance of advantage estimates by up to a factor of T compared to full-trajectory sampling for T-step trajectories, yielding lower-variance, better-targeted policy gradients. Experiments on seven QA benchmarks confirm that SLATE consistently outperforms both sparse-reward and process-reward baselines, with the largest gains on harder multi-hop tasks and smaller models.

We introduce Princeton365, a large-scale diverse dataset of 365 videos with accurate camera pose. Our dataset bridges the gap between accuracy and data diversity in current SLAM benchmarks by introducing a novel ground truth collection framework that leverages calibration boards and a 360-camera. We collect indoor, outdoor, and object scanning videos with synchronized monocular and stereo RGB video outputs as well as IMU. We further propose a new scene scale-aware evaluation metric for SLAM based on the the optical flow induced by the camera pose estimation error. In contrast to the current metrics, our new metric allows for comparison between the performance of SLAM methods across scenes as opposed to existing metrics such as Average Trajectory Error (ATE), allowing researchers to analyze the failure modes of their methods. We also propose a challenging Novel View Synthesis benchmark that covers cases not covered by current NVS benchmarks, such as fully non-Lambertian scenes with 360-degree camera trajectories. Please visit https://princeton365.cs.princeton.edu for the dataset, code, videos, and submission.

Large language models (LLMs) have advanced code generation from single-function tasks to competitive-programming problems, but existing multi-agent solutions either rely on costly large-scale (>30B) models or collapse when downsized to small open-source models. We present MapCoder-Lite, a framework for distilling the complex reasoning of large, multi-agent coding systems into a single 7B model. Our contribution is a novel, three-pillar methodology that synergistically generates, refines, and encodes multi-agent knowledge: (i) pass-based trajectory distillation from strong LLMs fixes format fragility in retrieval and reduces failures in debugging, (ii) supervisor-guided correction with global feedback strengthens planning and coding agents, and (iii) agent-wise LoRA fine-tuning delivers memory-efficient specialisation. Comprehensive evaluation on xCodeEval, APPS, and CodeContests shows that MapCoder-Lite more than doubles xCodeEval accuracy (from 13.2% to 28.3%), eliminates all format failures, while reducing GPU memory and token-generation time by 4x compared to a 32B model. It also achieves over 10% gains on simpler coding benchmarks, demonstrating broad improvements beyond competitive programming. These results demonstrate that careful agent-wise fine-tuning unleashes high-quality multi-agent coding on a small language model. Our code is publicly available at https://github.com/aiha-lab/MapCoder-Lite.

Large language models (LLMs) are increasingly deployed as multi-step decision-making agents, where effective reward design is essential for guiding learning. Although recent work explores various forms of reward shaping and step-level credit assignment, a key signal remains largely overlooked: the intrinsic uncertainty of LLMs. Uncertainty reflects model confidence, reveals where exploration is needed, and offers valuable learning cues even in failed trajectories. We introduce SELAUR: Self Evolving LLM Agent via Uncertainty-aware Rewards, a reinforcement learning framework that incorporates uncertainty directly into the reward design. SELAUR integrates entropy-, least-confidence-, and margin-based metrics into a combined token-level uncertainty estimate, providing dense confidence-aligned supervision, and employs a failure-aware reward reshaping mechanism that injects these uncertainty signals into step- and trajectory-level rewards to improve exploration efficiency and learning stability. Experiments on two benchmarks, ALFWorld and WebShop, show that our method consistently improves success rates over strong baselines. Ablation studies further demonstrate how uncertainty signals enhance exploration and robustness.

Verifying the success of computer use agent (CUA) trajectories is a critical challenge: without reliable verification, neither evaluation nor training signal can be trusted. In this paper, we present lessons learned from building a best-in-class verifier for web tasks we call the Universal Verifier. We design the Universal Verifier around four key principles: 1) constructing rubrics with meaningful, non-overlapping criteria to reduce noise; 2) separating process and outcome rewards that yield complementary signals, capturing cases where an agent follows the right steps but gets blocked or succeeds through an unexpected path; 3) distinguishing between controllable and uncontrollable failures scored via a cascading-error-free strategy for finer-grained failure understanding; and 4) a divide-and-conquer context management scheme that attends to all screenshots in a trajectory, improving reliability on longer task horizons. We validate these findings on CUAVerifierBench, a new set of CUA trajectories with both process and outcome human labels, showing that our Universal Verifier agrees with humans as often as humans agree with each other. We report a reduction in false positive rates to near zero compared to baselines like WebVoyager (geq 45\%) and WebJudge (geq 22\%). We emphasize that these gains stem from the cumulative effect of the design choices above. We also find that an auto-research agent achieves 70\% of expert quality in 5\% of the time, but fails to discover all strategies required to replicate the Universal Verifier. We open-source our Universal Verifier system along with CUAVerifierBench; available at https://github.com/microsoft/fara.

Generative sequence models are often trained to plan motion in physical domains, from robotics to mechanical simulations. When constructing a dataset to train such a model, engineers may curate demonstrations to specify how trajectories should be distributed over a physical quantity like travel distance or mechanical energy. For example, a roboticist building a maze navigation agent might choose demonstrations whose travel distances cover a fixed range uniformly, hoping to constrain the agent's expected power usage. We find that standard deep learning can violate this intent: each generated trajectory can seem plausible on its own, but the aggregate distribution over the physical quantity is wrong. We call this failure physical misgeneralization, and develop an account of its mechanism. Using controlled synthetic tasks, we show that physical misgeneralization arises when local errors typical of the model class propagate through the physical measurement to shift the recovered distribution. We estimate these errors with a data deviation kernel, and we use it to predict which physical quantities gain or lose mass in both our synthetic and more applied maze navigation and double-pendulum motion tasks. Finally, our mechanistic interpretation helps identify which mitigation strategies are structurally promising, and we use it to propose a kernel-informed intervention.

Robust pedestrian trajectory forecasting is crucial to developing safe autonomous vehicles. Although previous works have studied adversarial robustness in the context of trajectory forecasting, some significant issues remain unaddressed. In this work, we try to tackle these crucial problems. Firstly, the previous definitions of robustness in trajectory prediction are ambiguous. We thus provide formal definitions for two kinds of robustness, namely label robustness and pure robustness. Secondly, as previous works fail to consider robustness about all points in a disturbance interval, we utilise a probably approximately correct (PAC) framework for robustness verification. Additionally, this framework can not only identify potential counterexamples, but also provides interpretable analyses of the original methods. Our approach is applied using a prototype tool named TrajPAC. With TrajPAC, we evaluate the robustness of four state-of-the-art trajectory prediction models -- Trajectron++, MemoNet, AgentFormer, and MID -- on trajectories from five scenes of the ETH/UCY dataset and scenes of the Stanford Drone Dataset. Using our framework, we also experimentally study various factors that could influence robustness performance.

Autonomous systems, such as self-driving cars and drones, have made significant strides in recent years by leveraging visual inputs and machine learning for decision-making and control. Despite their impressive performance, these vision-based controllers can make erroneous predictions when faced with novel or out-of-distribution inputs. Such errors can cascade into catastrophic system failures and compromise system safety. In this work, we compute Neural Reachable Tubes, which act as parameterized approximations of Backward Reachable Tubes to stress-test the vision-based controllers and mine their failure modes. The identified failures are then used to enhance the system safety through both offline and online methods. The online approach involves training a classifier as a run-time failure monitor to detect closed-loop, system-level failures, subsequently triggering a fallback controller that robustly handles these detected failures to preserve system safety. For the offline approach, we improve the original controller via incremental training using a carefully augmented failure dataset, resulting in a more robust controller that is resistant to the known failure modes. In either approach, the system is safeguarded against shortcomings that transcend the vision-based controller and pertain to the closed-loop safety of the overall system. We validate the proposed approaches on an autonomous aircraft taxiing task that involves using a vision-based controller to guide the aircraft towards the centerline of the runway. Our results show the efficacy of the proposed algorithms in identifying and handling system-level failures, outperforming methods that rely on controller prediction error or uncertainty quantification for identifying system failures.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

As Multi-Agent Systems (MAS) become increasingly autonomous and complex, understanding their error modes is critical for ensuring their reliability and safety. However, research in this area has been severely hampered by the lack of large-scale, diverse datasets with precise, ground-truth error labels. To address this bottleneck, we introduce AEGIS, a novel framework for Automated Error Generation and Identification for Multi-Agent Systems. By systematically injecting controllable and traceable errors into initially successful trajectories, we create a rich dataset of realistic failures. This is achieved using a context-aware, LLM-based adaptive manipulator that performs sophisticated attacks like prompt injection and response corruption to induce specific, predefined error modes. We demonstrate the value of our dataset by exploring three distinct learning paradigms for the error identification task: Supervised Fine-Tuning, Reinforcement Learning, and Contrastive Learning. Our comprehensive experiments show that models trained on AEGIS data achieve substantial improvements across all three learning paradigms. Notably, several of our fine-tuned models demonstrate performance competitive with or superior to proprietary systems an order of magnitude larger, validating our automated data generation framework as a crucial resource for developing more robust and interpretable multi-agent systems. Our project website is available at https://kfq20.github.io/AEGIS-Website.

Physical AI systems increasingly map multimodal observations, language instructions, and learned world representations into physically consequential actions. Robotics foundation models, vision-language-action models, and world-model-based autonomous systems can condition decisions that move vehicles, robots, drones, and industrial machines. This transition exposes a safety problem that is not fully captured by conventional AI content moderation or by classical robot safety alone: a black-box model may issue a physically consequential action while appearing confident, plausible, and semantically aligned. The resulting failure can be silent, arising from sensor drift, occlusion, state-estimation error, distribution shift, hallucinated affordances, or invalid physical assumptions before downstream hardware controllers detect a violation. Across embodied foundation models, world models, robotics simulation, embodied safety benchmarks, safe control, runtime assurance, uncertainty estimation, verification, and guardrail evaluation, model capability and safety mechanisms have advanced along largely separate technical tracks. A recurring gap synthesized here is that no single stream surveyed in this review supplies a complete runtime authorization boundary between black-box Physical AI models and physical execution. The resulting analysis develops a bounded problem formulation, a definition of silent physical-action failure, a taxonomy of runtime guardrail functions, and evaluation requirements for comparing guardrails as Physical AI assurance mechanisms.

Recent advances in real-time interactive text-driven motion generation have enabled humanoids to perform diverse behaviors. However, kinematics-only generators often exhibit physical hallucinations, producing motion trajectories that are physically infeasible to track with a downstream motion tracking controller or unsafe for real-world deployment. These failures often arise from the lack of explicit physics-aware objectives for real-robot execution and become more severe under out-of-distribution (OOD) user inputs. Hence, we propose SafeFlow, a text-driven humanoid whole-body control framework that combines physics-guided motion generation with a 3-Stage Safety Gate driven by explicit risk indicators. SafeFlow adopts a two-level architecture. At the high level, we generate motion trajectories using Physics-Guided Rectified Flow Matching in a VAE latent space to improve real-robot executability, and further accelerate sampling via Reflow to reduce the number of function evaluations (NFE) for real-time control. The 3-Stage Safety Gate enables selective execution by detecting semantic OOD prompts using a Mahalanobis score in text-embedding space, filtering unstable generations via a directional sensitivity discrepancy metric, and enforcing final hard kinematic constraints such as joint and velocity limits before passing the generated trajectory to a low-level motion tracking controller. Extensive experiments on the Unitree G1 demonstrate that SafeFlow outperforms prior diffusion-based methods in success rate, physical compliance, and inference speed, while maintaining diverse expressiveness.

We present an experimental analysis on the use of a camera-based approach for high-altitude navigation by associating mapped landmarks from a satellite image database to camera images, and by leveraging inertial sensors between camera frames. We evaluate performance of both a sideways-tilted and downward-facing camera on data collected from a World View Enterprises high-altitude balloon with data beginning at an altitude of 33 km and descending to near ground level (4.5 km) with 1.5 hours of flight time. We demonstrate less than 290 meters of average position error over a trajectory of more than 150 kilometers. In addition to showing performance across a range of altitudes, we also demonstrate the robustness of the Terrain Relative Navigation (TRN) method to rapid rotations of the balloon, in some cases exceeding 20 degrees per second, and to camera obstructions caused by both cloud coverage and cords swaying underneath the balloon. Additionally, we evaluate performance on data collected by two cameras inside the capsule of Blue Origin's New Shepard rocket on payload flight NS-23, traveling at speeds up to 880 km/hr, and demonstrate less than 55 meters of average position error.

Robust robotic manipulation requires reliable failure detection and recovery. Although recent Vision-Language Models (VLMs) show promise in robot failure detection, their generalization is severely limited by the scarcity and narrow coverage of failure data. To address this bottleneck, we propose an automatic framework for generating diverse robotic planning and execution failures across both simulated and real-world environments. Our approach perturbs successful manipulation trajectories to synthesize failures that reflect realistic failure distributions, and leverages VLMs to produce structured step-by-step reasoning traces. This yields FailCoT, a large-scale failure reasoning dataset built upon the RLBench simulator and the BridgeDataV2 real-robot dataset. Using FailCoT, we train Guardian, a multi-view reasoning VLM for unified planning and execution verification. Guardian achieves state-of-the-art performance on three unseen real-world benchmarks: RoboFail, RoboVQA, and our newly introduced UR5-Fail. When integrated with a state-of-the-art LLM-based manipulation policy, it consistently boosts task success rates in both simulation and real-world deployment. These results demonstrate that scaling high-quality failure reasoning data is critical for improving generalization in robotic failure detection. Code, Data, and Models available at https://www.di.ens.fr/willow/research/guardian/.

We address the problem of runtime trajectory anomaly detection, a critical capability for enabling trustworthy LLM agents. Current safety measures predominantly focus on static input/output filtering. However, we argue that ensuring LLM agents reliability requires auditing the intermediate execution process. In this work, we formulate the task of Trajectory Anomaly Detection. The goal is not merely detection, but precise error localization. This capability is essential for enabling efficient rollback-and-retry. To achieve this, we construct TrajBench, a dataset synthesized via a perturb-and-complete strategy to cover diverse procedural anomalies. Using this benchmark, we investigate the capability of models in process supervision. We observe that general-purpose LLMs, even with zero-shot prompting, struggle to identify and localize these anomalies. This reveals that generalized capabilities do not automatically translate to process reliability. To address this, we propose TrajAD, a specialized verifier trained with fine-grained process supervision. Our approach outperforms baselines, demonstrating that specialized supervision is essential for building trustworthy agents.

Recent advances in robotic manipulation have integrated low-level robotic control into Vision-Language Models (VLMs), extending them into Vision-Language-Action (VLA) models. Although state-of-the-art VLAs achieve strong performance in downstream robotic applications, supported by large-scale crowd-sourced robot training data, they still inevitably encounter failures during execution. Enabling robots to reason and recover from unpredictable and abrupt failures remains a critical challenge. Existing robotic manipulation datasets, collected in either simulation or the real world, primarily provide only ground-truth trajectories, leaving robots unable to recover once failures occur. Moreover, the few datasets that address failure detection typically offer only textual explanations, which are difficult to utilize directly in VLA models. To address this gap, we introduce FailSafe, a novel failure generation and recovery system that automatically produces diverse failure cases paired with executable recovery actions. FailSafe can be seamlessly applied to any manipulation task in any simulator, enabling scalable creation of failure action data. To demonstrate its effectiveness, we fine-tune LLaVa-OneVision-7B (LLaVa-OV-7B) to build FailSafe-VLM. Experimental results show that FailSafe-VLM successfully helps robotic arms detect and recover from potential failures, improving the performance of three state-of-the-art VLA models (pi0-FAST, OpenVLA, OpenVLA-OFT) by up to 22.6% on average across several tasks in Maniskill. Furthermore, FailSafe-VLM could generalize across different spatial configurations, camera viewpoints, object and robotic embodiments. We plan to release the FailSafe code to the community.

Imitation learning (IL) with generative models, such as diffusion and flow matching, has enabled robots to perform complex, long-horizon tasks. However, distribution shifts from unseen environments or compounding action errors can still cause unpredictable and unsafe behavior, leading to task failure. Early failure prediction during runtime is therefore essential for deploying robots in human-centered and safety-critical environments. We propose FIPER, a general framework for Failure Prediction at Runtime for generative IL policies that does not require failure data. FIPER identifies two key indicators of impending failure: (i) out-of-distribution (OOD) observations detected via random network distillation in the policy's embedding space, and (ii) high uncertainty in generated actions measured by a novel action-chunk entropy score. Both failure prediction scores are calibrated using a small set of successful rollouts via conformal prediction. A failure alarm is triggered when both indicators, aggregated over short time windows, exceed their thresholds. We evaluate FIPER across five simulation and real-world environments involving diverse failure modes. Our results demonstrate that FIPER better distinguishes actual failures from benign OOD situations and predicts failures more accurately and earlier than existing methods. We thus consider this work an important step towards more interpretable and safer generative robot policies. Code, data and videos are available at https://tum-lsy.github.io/fiper_website.

We present a fast algorithm for the design of smooth paths (or trajectories) that are constrained to lie in a collection of axis-aligned boxes. We consider the case where the number of these safe boxes is large, and basic preprocessing of them (such as finding their intersections) can be done offline. At runtime we quickly generate a smooth path between given initial and terminal positions. Our algorithm designs trajectories that are guaranteed to be safe at all times, and detects infeasibility whenever such a trajectory does not exist. Our algorithm is based on two subproblems that we can solve very efficiently: finding a shortest path in a weighted graph, and solving (multiple) convex optimal-control problems. We demonstrate the proposed path planner on large-scale numerical examples, and we provide an efficient open-source software implementation, fastpathplanning.

Uncertainty in perception, actuation, and the environment often require multiple attempts for a robotic task to be successful. We study a class of problems providing (1) low-entropy indicators of terminal success / failure, and (2) unreliable (high-entropy) data to predict the final outcome of an ongoing task. Examples include a robot trying to connect with a charging station, parallel parking, or assembling a tightly-fitting part. The ability to restart after predicting failure early, versus simply running to failure, can significantly decrease the makespan, that is, the total time to completion, with the drawback of potentially short-cutting an otherwise successful operation. Assuming task running times to be Poisson distributed, and using a Markov Jump process to capture the dynamics of the underlying Markov Decision Process, we derive a closed form solution that predicts makespan based on the confusion matrix of the failure predictor. This allows the robot to learn failure prediction in a production environment, and only adopt a preemptive policy when it actually saves time. We demonstrate this approach using a robotic peg-in-hole assembly problem using a real robotic system. Failures are predicted by a dilated convolutional network based on force-torque data, showing an average makespan reduction from 101s to 81s (N=120, p<0.05). We posit that the proposed algorithm generalizes to any robotic behavior with an unambiguous terminal reward, with wide ranging applications on how robots can learn and improve their behaviors in the wild.

Autonomous agents have recently achieved remarkable progress across diverse domains, yet most evaluations focus on short-horizon, fully observable tasks. In contrast, many critical real-world tasks, such as large-scale software development, commercial investment, and scientific discovery, unfold in long-horizon and partially observable scenarios where success hinges on sustained reasoning, planning, memory management, and tool use. Existing benchmarks rarely capture these long-horizon challenges, leaving a gap in systematic evaluation. To bridge this gap, we introduce UltraHorizon a novel benchmark that measures the foundational capabilities essential for complex real-world challenges. We use exploration as a unifying task across three distinct environments to validate these core competencies. Agents are designed in long-horizon discovery tasks where they must iteratively uncover hidden rules through sustained reasoning, planning, memory and tools management, and interaction with environments. Under the heaviest scale setting, trajectories average 200k+ tokens and 400+ tool calls, whereas in standard configurations they still exceed 35k tokens and involve more than 60 tool calls on average. Our extensive experiments reveal that LLM-agents consistently underperform in these settings, whereas human participants achieve higher scores, underscoring a persistent gap in agents' long-horizon abilities. We also observe that simple scaling fails in our task. To better illustrate the failure of agents, we conduct an in-depth analysis of collected trajectories. We identify eight types of errors and attribute them to two primary causes: in-context locking and functional fundamental capability gaps. https://github.com/StarDewXXX/UltraHorizon{Our code will be available here.}

Differentiable programming techniques are widely used in the community and are responsible for the machine learning renaissance of the past several decades. While these methods are powerful, they have limits. In this short report, we discuss a common chaos based failure mode which appears in a variety of differentiable circumstances, ranging from recurrent neural networks and numerical physics simulation to training learned optimizers. We trace this failure to the spectrum of the Jacobian of the system under study, and provide criteria for when a practitioner might expect this failure to spoil their differentiation based optimization algorithms.

When an LLM agent reads a confidential file, then writes a summary, then emails it externally, no single step is unsafe, but the sequence is a data leak. We call this safety drift: individually safe actions compounding into violations. Prior work has measured this problem; we predict it. SafetyDrift models agent safety trajectories as absorbing Markov chains, computing the probability that a trajectory will reach a violation within a given number of steps via closed form absorption analysis. A consequence of the monotonic state design is that every agent will eventually violate safety if left unsupervised (absorption probability 1.0 from all states), making the practical question not if but when, and motivating our focus on finite horizon prediction. Across 357 traces spanning 40 realistic tasks in four categories, we discover that "points of no return" are sharply task dependent: in communication tasks, agents that reach even a mild risk state have an 85% chance of violating safety within five steps, while in technical tasks the probability stays below 5% from any state. A lightweight monitor built on these models detects 94.7% of violations with 3.7 steps of advance warning at negligible computational cost, outperforming both keyword matching (44.7% detection, 55.9% false positive rate) and per step LLM judges (52.6% detection, 38.2% false positive rate) while running over 60,000x faster.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

As AI becomes more capable, we entrust it with more general and consequential tasks. The risks from failure grow more severe with increasing task scope. It is therefore important to understand how extremely capable AI models will fail: Will they fail by systematically pursuing goals we do not intend? Or will they fail by being a hot mess, and taking nonsensical actions that do not further any goal? We operationalize this question using a bias-variance decomposition of the errors made by AI models: An AI's incoherence on a task is measured over test-time randomness as the fraction of its error that stems from variance rather than bias in task outcome. Across all tasks and frontier models we measure, the longer models spend reasoning and taking actions, the more incoherent their failures become. Incoherence changes with model scale in a way that is experiment dependent. However, in several settings, larger, more capable models are more incoherent than smaller models. Consequently, scale alone seems unlikely to eliminate incoherence. Instead, as more capable AIs pursue harder tasks, requiring more sequential action and thought, our results predict failures to be accompanied by more incoherent behavior. This suggests a future where AIs sometimes cause industrial accidents (due to unpredictable misbehavior), but are less likely to exhibit consistent pursuit of a misaligned goal. This increases the relative importance of alignment research targeting reward hacking or goal misspecification.

While GUI agents have advanced rapidly, they often lack the robustness to recover from their own errors, hindering real-world deployment. To bridge this gap at both the evaluation and data levels, we introduce GUI-RobustEval and propose Robustness-driven Trajectory Synthesis. GUI-RobustEval contains 1,216 executable test cases that systematically measure error recovery capabilities across a broad and realistic spectrum of error modes. At the data level, RoTS is a scalable synthesis framework that creates 800k high-quality data via a tree-based pipeline that proactively discovers diverse error modes and synthesizes corresponding recovery steps. Our two models, RoTS-7B and RoTS-32B, fine-tuned on our dataset, both demonstrate significant gains on GUI-RobustEval and traditional GUI benchmarks. Notably, RoTS-32B achieves state-of-the-art performance on OSWorld, with a 47.4% success rate and a 33.8% All-Pass@4 score, suggesting that improved long-horizon error recovery ability contributes to both robustness and overall performance. Our code is available at https://github.com/AlibabaResearch/RoTS.

Code agents can autonomously resolve GitHub issues, yet when they fail, current evaluation provides no visibility into where or why. Metrics such as Pass@1 collapse an entire execution into a single binary outcome, making it difficult to identify where and why the agent went wrong. To address this limitation, we introduce TRAJEVAL, a diagnostic framework that decomposes agent trajectories into three interpretable stages: search (file localization), read (function comprehension), and edit (modification targeting). For each stage, we compute precision and recall by comparing against reference patches. Analyzing 16,758 trajectories across three agent architectures and seven models, we find universal inefficiencies (all agents examine approximately 22x more functions than necessary) yet distinct failure modes: GPT-5 locates relevant code but targets edits incorrectly, while Qwen-32B fails at file discovery entirely. We validate that these diagnostics are predictive, achieving model-level Pass@1 prediction within 0.87-2.1% MAE, and actionable: real-time feedback based on trajectory signals improves two state-of-the-art models by 2.2-4.6 percentage points while reducing costs by 20-31%. These results demonstrate that our framework not only provides a more fine-grained analysis of agent behavior, but also translates diagnostic signals into tangible performance gains. More broadly, TRAJEVAL transforms agent evaluation beyond outcome-based benchmarking toward mechanism-driven diagnosis of agent success and failure.

A significant number of traffic crashes are secondary crashes that occur because of an earlier incident on the road. Thus, early detection of traffic incidents is crucial for road users from safety perspectives with a potential to reduce the risk of secondary crashes. The wide availability of GPS devices now-a-days gives an opportunity of tracking and recording vehicle trajectories. The objective of this study is to use vehicle trajectory data for advance real-time detection of traffic incidents on highways using machine learning-based algorithms. The study uses three days of unevenly sequenced vehicle trajectory data and traffic incident data on I-10, one of the most crash-prone highways in Louisiana. Vehicle trajectories are converted to trajectories based on virtual detector locations to maintain spatial uniformity as well as to generate historical traffic data for machine learning algorithms. Trips matched with traffic incidents on the way are separated and along with other trips with similar spatial attributes are used to build a database for modeling. Multiple machine learning algorithms such as Logistic Regression, Random Forest, Extreme Gradient Boost, and Artificial Neural Network models are used to detect a trajectory that is likely to face an incident in the downstream road section. Results suggest that the Random Forest model achieves the best performance for predicting an incident with reasonable recall value and discrimination capability.

Advancements in large language models (LLMs) have demonstrated their potential in facilitating high-level reasoning, logical reasoning and robotics planning. Recently, LLMs have also been able to generate reward functions for low-level robot actions, effectively bridging the interface between high-level planning and low-level robot control. However, the challenge remains that even with syntactically correct plans, robots can still fail to achieve their intended goals. This failure can be attributed to imperfect plans proposed by LLMs or to unforeseeable environmental circumstances that hinder the execution of planned subtasks due to erroneous assumptions about the state of objects. One way to prevent these challenges is to rely on human-provided step-by-step instructions, limiting the autonomy of robotic systems. Vision Language Models (VLMs) have shown remarkable success in tasks such as visual question answering and image captioning. Leveraging the capabilities of VLMs, we present a novel framework called Robotic Replanning with Perception and Language Models (RePLan) that enables real-time replanning capabilities for long-horizon tasks. This framework utilizes the physical grounding provided by a VLM's understanding of the world's state to adapt robot actions when the initial plan fails to achieve the desired goal. We test our approach within four environments containing seven long-horizion tasks. We find that RePLan enables a robot to successfully adapt to unforeseen obstacles while accomplishing open-ended, long-horizon goals, where baseline models cannot. Find more information at https://replan-lm.github.io/replan.github.io/

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

Predicting the trajectories of surrounding objects is a critical task for self-driving vehicles and many other autonomous systems. Recent works demonstrate that adversarial attacks on trajectory prediction, where small crafted perturbations are introduced to history trajectories, may significantly mislead the prediction of future trajectories and induce unsafe planning. However, few works have addressed enhancing the robustness of this important safety-critical task.In this paper, we present a novel adversarial training method for trajectory prediction. Compared with typical adversarial training on image tasks, our work is challenged by more random input with rich context and a lack of class labels. To address these challenges, we propose a method based on a semi-supervised adversarial autoencoder, which models disentangled semantic features with domain knowledge and provides additional latent labels for the adversarial training. Extensive experiments with different types of attacks demonstrate that our Semisupervised Semantics-guided Adversarial Training (SSAT) method can effectively mitigate the impact of adversarial attacks by up to 73% and outperform other popular defense methods. In addition, experiments show that our method can significantly improve the system's robust generalization to unseen patterns of attacks. We believe that such semantics-guided architecture and advancement on robust generalization is an important step for developing robust prediction models and enabling safe decision-making.

Video generation models have shown strong potential as world models for autonomous driving simulation. However, existing approaches are primarily trained on real-world driving datasets, which mostly contain natural and safe driving scenarios. As a result, current models often fail when conditioned on challenging or counterfactual trajectories-such as imperfect trajectories generated by simulators or planning systems-producing videos with severe physical inconsistencies and artifacts. To address this limitation, we propose PhyGenesis, a world model designed to generate driving videos with high visual fidelity and strong physical consistency. Our framework consists of two key components: (1) a physical condition generator that transforms potentially invalid trajectory inputs into physically plausible conditions, and (2) a physics-enhanced video generator that produces high-fidelity multi-view driving videos under these conditions. To effectively train these components, we construct a large-scale, physics-rich heterogeneous dataset. Specifically, in addition to real-world driving videos, we generate diverse challenging driving scenarios using the CARLA simulator, from which we derive supervision signals that guide the model to learn physically grounded dynamics under extreme conditions. This challenging-trajectory learning strategy enables trajectory correction and promotes physically consistent video generation. Extensive experiments demonstrate that PhyGenesis consistently outperforms state-of-the-art methods, especially on challenging trajectories. Our project page is available at: https://wm-research.github.io/PhyGenesis/.

Multi-agent systems (MAS) are increasingly capable of tackling complex real-world tasks, yet their reliance on inter-agent coordination, tool use, and long-horizon reasoning makes error recognition particularly challenging. Minor errors can propagate across agents, escalating into task failures while producing long, intertwined execution trajectories that impose significant costs for both human developers and automated systems to debug and analyze. Our key insight is that, despite surface differences in failure trajectories (e.g., logs), MAS errors often recur with similar structural patterns. This paper presents CORRECT, the first lightweight, training-free framework that leverages an online cache of distilled error schemata to recognize and transfer knowledge of failure structures across new requests. This cache-based reuse allows LLMs to perform targeted error localization at inference time, avoiding the need for expensive retraining while adapting to dynamic MAS deployments in subseconds. To support rigorous study in this domain, we also introduce CORRECT-Error, a large-scale dataset of over 2,000 annotated trajectories collected through a novel error-injection pipeline guided by real-world distributions, and further validated through human evaluation to ensure alignment with natural failure patterns. Experiments across seven diverse MAS applications show that CORRECT improves step-level error localization up to 19.8% over existing advances while at near-zero overhead, substantially narrowing the gap between automated and human-level error recognition.

Gripper-in-hand data collection decouples demonstration acquisition from robot hardware, but whether a trajectory is executable on the target robot remains unknown until a separate replay-and-validate stage. Failed demonstrations therefore inflate the effective cost per usable trajectory through repeated collection, diagnosis, and validation. Existing collection-time feedback systems mitigate this issue but rely on head-worn AR/VR displays, robot-in-the-loop hardware, or learned dynamics models; real-time executability feedback has not yet been integrated into the gripper-in-hand data collection paradigm. We present FeasibleCap, a gripper-in-hand data collection system that brings real-time executability guidance into robot-free capture. At each frame, FeasibleCap checks reachability, joint-rate limits, and collisions against a target robot model and closes the loop through on-device visual overlays and haptic cues, allowing demonstrators to correct motions during collection without learned models, headsets, or robot hardware. On pick-and-place and tossing tasks, FeasibleCap improves replay success and reduces the fraction of infeasible frames, with the largest gains on tossing. Simulation experiments further indicate that enforcing executability constraints during collection does not sacrifice cross-embodiment transfer across robot platforms. Hardware designs and software are available at https://github.com/aod321/FeasibleCap.

LLMs increasingly exhibit over-refusal behavior, where safety mechanisms cause models to reject benign instructions that superficially resemble harmful content. This phenomena diminishes utility in production applications that repeatedly rely on common prompt templates or applications that frequently rely on LLMs for specific tasks (e.g. sentiment analysis, language translation). Through comprehensive evaluation, we demonstrate that LLMs still tend to refuse responses to harmful instructions when those instructions are reframed to appear as benign tasks. Our mechanistic analysis reveal that LLMs follow distinct "constellation" patterns in embedding space as representations traverse layers, with each task maintaining consistent trajectories that shift predictably between refusal and non-refusal cases. We introduce SafeConstellations, an inference-time trajectory-shifting approach that tracks task-specific trajectory patterns and guides representations toward non-refusal pathways. By selectively guiding model behavior only on tasks prone to over-refusal, and by preserving general model behavior, our method reduces over-refusal rates by up to 73% with minimal impact on utility-offering a principled approach to mitigating over-refusals.

In trajectory forecasting tasks for traffic, future output trajectories can be computed by advancing the ego vehicle's state with predicted actions according to a kinematics model. By unrolling predicted trajectories via time integration and models of kinematic dynamics, predicted trajectories should not only be kinematically feasible but also relate uncertainty from one timestep to the next. While current works in probabilistic prediction do incorporate kinematic priors for mean trajectory prediction, variance is often left as a learnable parameter, despite uncertainty in one time step being inextricably tied to uncertainty in the previous time step. In this paper, we show simple and differentiable analytical approximations describing the relationship between variance at one timestep and that at the next with the kinematic bicycle model. These approximations can be easily incorporated with negligible additional overhead into any existing trajectory forecasting framework utilizing probabilistic predictions, whether it is autoregressive or one-shot prediction. In our results, we find that encoding the relationship between variance across timesteps works especially well in unoptimal settings, such as with small or noisy datasets. We observe up to a 50% performance boost in partial dataset settings and up to an 8% performance boost in large-scale learning compared to previous kinematic prediction methods on SOTA trajectory forecasting architectures out-of-the-box, with no fine-tuning. In this paper, we show four analytical formulations of probabilistic kinematic priors which can be used for any Gaussian Mixture Model (GMM)-based deep learning models, quantify the error bound on linear approximations applied during trajectory unrolling, and show results to evaluate each formulation in trajectory forecasting.

While vision-language-action models (VLAs) have shown promising robotic behaviors across a diverse set of manipulation tasks, they achieve limited success rates when deployed on novel tasks out-of-the-box. To allow these policies to safely interact with their environments, we need a failure detector that gives a timely alert such that the robot can stop, backtrack, or ask for help. However, existing failure detectors are trained and tested only on one or a few specific tasks, while VLAs require the detector to generalize and detect failures also in unseen tasks and novel environments. In this paper, we introduce the multitask failure detection problem and propose SAFE, a failure detector for generalist robot policies such as VLAs. We analyze the VLA feature space and find that VLAs have sufficient high-level knowledge about task success and failure, which is generic across different tasks. Based on this insight, we design SAFE to learn from VLA internal features and predict a single scalar indicating the likelihood of task failure. SAFE is trained on both successful and failed rollouts, and is evaluated on unseen tasks. SAFE is compatible with different policy architectures. We test it on OpenVLA, pi_0, and pi_0-FAST in both simulated and real-world environments extensively. We compare SAFE with diverse baselines and show that SAFE achieves state-of-the-art failure detection performance and the best trade-off between accuracy and detection time using conformal prediction. More qualitative results can be found at https://vla-safe.github.io/.

Training tool-use agents typically relies on outcome-based filtering: Supervised Fine-Tuning (SFT) on successful trajectories and Reinforcement Learning (RL) on pass-rate-selected tasks. However, this paradigm ignores interaction dynamics: successful trajectories may lack error recovery or exhibit redundancy, while pass rates fail to distinguish structurally informative tasks from trivial ones. We propose TopoCurate, an interaction-aware framework that projects multi-trial rollouts from the same task into a unified semantic quotient topology. By merging equivalent action-observation states, this projection transforms scattered linear trajectories into a structured manifold that explicitly captures how tool invocations and environmental responses drive the divergence between effective strategies and failure modes. Leveraging this representation, we introduce a dual-selection mechanism: for SFT, we prioritize trajectories demonstrating reflective recovery, semantic efficiency, and strategic diversity to mitigate covariate shift and mode collapse; for RL, we select tasks with high error branch ratios and strategic heterogeneity, maximizing gradient Signal-to-Noise Ratio to address vanishing signals in sparse-reward settings. Evaluations on BFCLv3 and Tau2 Bench show that TopoCurate achieves consistent gains of 4.2\% (SFT) and 6.9\% (RL) over state-of-the-art baselines. We will release the code and data soon for further investigations.

Trajectory planning is commonly used as part of a local planner in autonomous driving. This paper considers the problem of planning a continuous-curvature-rate trajectory between fixed start and goal states that minimizes a tunable trade-off between passenger comfort and travel time. The problem is an instance of infinite dimensional optimization over two continuous functions: a path, and a velocity profile. We propose a simplification of this problem that facilitates the discretization of both functions. This paper also proposes a method to quickly generate minimal-length paths between start and goal states based on a single tuning parameter: the second derivative of curvature. Furthermore, we discretize the set of velocity profiles along a given path into a selection of acceleration way-points along the path. Gradient-descent is then employed to minimize cost over feasible choices of the second derivative of curvature, and acceleration way-points, resulting in a method that repeatedly solves the path and velocity profiles in an iterative fashion. Numerical examples are provided to illustrate the benefits of the proposed methods.

We report a case study of four end-to-end attempts to autonomously generate ML research papers using a pipeline of six LLM agents mapped to stages of the scientific workflow. Of these four, three attempts failed during implementation or evaluation. One completed the pipeline and was accepted to Agents4Science 2025, an experimental inaugural venue that required AI systems as first authors, passing both human and multi-AI review. From these attempts, we document six recurring failure modes: bias toward training data defaults, implementation drift under execution pressure, memory and context degradation across long-horizon tasks, overexcitement that declares success despite obvious failures, insufficient domain intelligence, and weak scientific taste in experimental design. We conclude by discussing four design principles for more robust AI-scientist systems, implications for autonomous scientific discovery, and we release all prompts, artifacts, and outputs at https://github.com/Lossfunk/ai-scientist-artefacts-v1

Training LLM agents in multi-turn environments with sparse rewards, where completing a single task requires 30+ turns of interaction within an episode, presents a fundamental challenge for reinforcement learning. We identify a critical failure mode unique to this setting: the exploration-exploitation cascade failure. This cascade begins with early-stage policy premature convergence, where sparse feedback causes agents to commit to flawed, low-entropy strategies. Subsequently, agents enter late-stage policy collapse, where conventional entropy regularization becomes counterproductive, promoting chaotic exploration that destabilizes training. We propose Entropy-regularized Policy Optimization (EPO), a general framework that breaks this failure cycle through three synergistic mechanisms: (1) adopting entropy regularization in multi-turn settings to enhance exploration, (2) an entropy smoothing regularizer that bounds policy entropy within historical averages to prevent abrupt fluctuations, and (3) adaptive phase-based weighting that balances exploration and exploitation across training. Our analysis justifies that EPO guarantees monotonically decreasing entropy variance while maintaining convergence. EPO achieves up to 152% performance improvement on ScienceWorld and up to 19.8% on ALFWorld. Our work demonstrates that multi-turn sparse-reward settings require fundamentally different entropy control than traditional RL, with broad implications for LLM agent training.

Autonomous agent systems powered by Large Language Models (LLMs) have demonstrated promising capabilities in automating complex tasks. However, current evaluations largely rely on success rates without systematically analyzing the interactions, communication mechanisms, and failure causes within these systems. To bridge this gap, we present a benchmark of 34 representative programmable tasks designed to rigorously assess autonomous agents. Using this benchmark, we evaluate three popular open-source agent frameworks combined with two LLM backbones, observing a task completion rate of approximately 50%. Through in-depth failure analysis, we develop a three-tier taxonomy of failure causes aligned with task phases, highlighting planning errors, task execution issues, and incorrect response generation. Based on these insights, we propose actionable improvements to enhance agent planning and self-diagnosis capabilities. Our failure taxonomy, together with mitigation advice, provides an empirical foundation for developing more robust and effective autonomous agent systems in the future.

As large language models (LLMs) evolve from static chatbots into autonomous agents, the primary vulnerability surface shifts from final outputs to intermediate execution traces. While safety guardrails are well-benchmarked for natural language responses, their efficacy remains largely unexplored within multi-step tool-use trajectories. To address this gap, we introduce TraceSafe-Bench, the first comprehensive benchmark specifically designed to assess mid-trajectory safety. It encompasses 12 risk categories, ranging from security threats (e.g., prompt injection, privacy leaks) to operational failures (e.g., hallucinations, interface inconsistencies), featuring over 1,000 unique execution instances. Our evaluation of 13 LLM-as-a-guard models and 7 specialized guardrails yields three critical findings: 1) Structural Bottleneck: Guardrail efficacy is driven more by structural data competence (e.g., JSON parsing) than semantic safety alignment. Performance correlates strongly with structured-to-text benchmarks (ρ=0.79) but shows near-zero correlation with standard jailbreak robustness. 2) Architecture over Scale: Model architecture influences risk detection performance more significantly than model size, with general-purpose LLMs consistently outperforming specialized safety guardrails in trajectory analysis. 3) Temporal Stability: Accuracy remains resilient across extended trajectories. Increased execution steps allow models to pivot from static tool definitions to dynamic execution behaviors, actually improving risk detection performance in later stages. Our findings suggest that securing agentic workflows requires jointly optimizing for structural reasoning and safety alignment to effectively mitigate mid-trajectory risks.

Why do pretrained diffusion or flow-matching policies fail when the same task is performed near an obstacle, on a shifted support surface, or amid mild clutter? Such failures rarely reflect missing motor skills; instead, they expose a limitation of imitation learning under train-test shifts, where action generation is tightly coupled to training-specific spatial configurations and task specifications. Retraining or fine-tuning to address these failures is costly and conceptually misaligned, as the required behaviors already exist but cannot be selectively adapted at test time. We propose Vision-Language Steering (VLS), a training-free framework for inference-time adaptation of frozen generative robot policies. VLS treats adaptation as an inference-time control problem, steering the sampling process of a pretrained diffusion or flow-matching policy in response to out-of-distribution observation-language inputs without modifying policy parameters. By leveraging vision-language models to synthesize trajectory-differentiable reward functions, VLS guides denoising toward action trajectories that satisfy test-time spatial and task requirements. Across simulation and real-world evaluations, VLS consistently outperforms prior steering methods, achieving a 31% improvement on CALVIN and a 13% gain on LIBERO-PRO. Real-world deployment on a Franka robot further demonstrates robust inference-time adaptation under test-time spatial and semantic shifts. Project page: https://vision-language-steering.github.io/webpage/

Falling is an inherent risk of humanoid mobility. Maintaining stability is thus a primary safety focus in robot control and learning, yet no existing approach fully averts loss of balance. When instability does occur, prior work addresses only isolated aspects of falling: avoiding falls, choreographing a controlled descent, or standing up afterward. Consequently, humanoid robots lack integrated strategies for impact mitigation and prompt recovery when real falls defy these scripts. We aim to go beyond keeping balance to make the entire fall-and-recovery process safe and autonomous: prevent falls when possible, reduce impact when unavoidable, and stand up when fallen. By fusing sparse human demonstrations with reinforcement learning and an adaptive diffusion-based memory of safe reactions, we learn adaptive whole-body behaviors that unify fall prevention, impact mitigation, and rapid recovery in one policy. Experiments in simulation and on a Unitree G1 demonstrate robust sim-to-real transfer, lower impact forces, and consistently fast recovery across diverse disturbances, pointing towards safer, more resilient humanoids in real environments. Videos are available at https://firm2025.github.io/.

We study the problem of learning to perform multi-stage robotic manipulation tasks, with applications to cable routing, where the robot must route a cable through a series of clips. This setting presents challenges representative of complex multi-stage robotic manipulation scenarios: handling deformable objects, closing the loop on visual perception, and handling extended behaviors consisting of multiple steps that must be executed successfully to complete the entire task. In such settings, learning individual primitives for each stage that succeed with a high enough rate to perform a complete temporally extended task is impractical: if each stage must be completed successfully and has a non-negligible probability of failure, the likelihood of successful completion of the entire task becomes negligible. Therefore, successful controllers for such multi-stage tasks must be able to recover from failure and compensate for imperfections in low-level controllers by smartly choosing which controllers to trigger at any given time, retrying, or taking corrective action as needed. To this end, we describe an imitation learning system that uses vision-based policies trained from demonstrations at both the lower (motor control) and the upper (sequencing) level, present a system for instantiating this method to learn the cable routing task, and perform evaluations showing great performance in generalizing to very challenging clip placement variations. Supplementary videos, datasets, and code can be found at https://sites.google.com/view/cablerouting.

Safety and robustness are crucial factors in developing trustworthy autonomous vehicles. One essential aspect of addressing these factors is to equip vehicles with the capability to predict future trajectories for all moving objects in the surroundings and quantify prediction uncertainties. In this paper, we propose the Sequential Neural Variational Agent (SeNeVA), a generative model that describes the distribution of future trajectories for a single moving object. Our approach can distinguish Out-of-Distribution data while quantifying uncertainty and achieving competitive performance compared to state-of-the-art methods on the Argoverse 2 and INTERACTION datasets. Specifically, a 0.446 meters minimum Final Displacement Error, a 0.203 meters minimum Average Displacement Error, and a 5.35% Miss Rate are achieved on the INTERACTION test set. Extensive qualitative and quantitative analysis is also provided to evaluate the proposed model. Our open-source code is available at https://github.com/PurdueDigitalTwin/seneva.

Trajectory prediction models often fail in real-world automated driving due to distributional shifts between training and test conditions. Such distributional shifts, whether behavioural or environmental, pose a critical risk by causing the model to make incorrect forecasts in unfamiliar situations. We propose a self-supervised method that trains a decoder in a post-hoc fashion on the self-supervised task of forecasting the second half of observed trajectories from the first half. The L2 norm of the gradient of this forecasting loss with respect to the decoder's final layer defines a score to identify distribution shifts. Our approach, first, does not affect the trajectory prediction model, ensuring no interference with original prediction performance and second, demonstrates substantial improvements on distribution shift detection for trajectory prediction on the Shifts and Argoverse datasets. Moreover, we show that this method can also be used to early detect collisions of a deep Q-Network motion planner in the Highway simulator. Source code is available at https://github.com/Michedev/forecasting-the-past.

Outcome-reward reinforcement learning (RL) has proven effective at improving the reasoning capabilities of large language models (LLMs). However, standard RL assigns credit only at the level of the final answer, penalizing entire reasoning traces when the outcome is incorrect and uniformly reinforcing all steps when it is correct. As a result, correct intermediate steps may be discouraged in failed traces, while spurious steps may be reinforced in successful ones. We refer to this failure mode as the problem of credit assignment. While a natural remedy is to train a process reward model, accurately optimizing such models to identify corrective reasoning steps remains challenging. We introduce Intervention Training (InT), a training paradigm in which the model performs fine-grained credit assignment on its own reasoning traces by proposing short, targeted corrections that steer trajectories toward higher reward. Using reference solutions commonly available in mathematical reasoning datasets and exploiting the fact that verifying a model-generated solution is easier than generating a correct one from scratch, the model identifies the first error in its reasoning and proposes a single-step intervention to redirect the trajectory toward the correct solution. We then apply supervised fine-tuning (SFT) to the on-policy rollout up to the point of error concatenated with the intervention, localizing error to the specific step that caused failure. We show that the resulting model serves as a far better initialization for RL training. After running InT and subsequent fine-tuning with RL, we improve accuracy by nearly 14% over a 4B-parameter base model on IMO-AnswerBench, outperforming larger open-source models such as gpt-oss-20b.

As robotic systems execute increasingly difficult task sequences, so does the number of ways in which they can fail. Video Anomaly Detection (VAD) frameworks typically focus on singular, low-level kinematic or action failures, struggling to identify more complex temporal or spatial task violations, because they do not necessarily manifest as low-level execution errors. To address this problem, the main contribution of this paper is a new VAD-inspired architecture, TIMID, which is able to detect robot time-dependent mistakes when executing high-level tasks. Our architecture receives as inputs a video and prompts of the task and the potential mistake, and returns a frame-level prediction in the video of whether the mistake is present or not. By adopting a VAD formulation, the model can be trained with weak supervision, requiring only a single label per video. Additionally, to alleviate the problem of data scarcity of incorrect executions, we introduce a multi-robot simulation dataset with controlled temporal errors and real executions for zero-shot sim-to-real evaluation. Our experiments demonstrate that out-of-the-box VLMs lack the explicit temporal reasoning required for this task, whereas our framework successfully detects different types of temporal errors. Project: https://ropertunizar.github.io/TIMID/

The field of trajectory forecasting has grown significantly in recent years, partially owing to the release of numerous large-scale, real-world human trajectory datasets for autonomous vehicles (AVs) and pedestrian motion tracking. While such datasets have been a boon for the community, they each use custom and unique data formats and APIs, making it cumbersome for researchers to train and evaluate methods across multiple datasets. To remedy this, we present trajdata: a unified interface to multiple human trajectory datasets. At its core, trajdata provides a simple, uniform, and efficient representation and API for trajectory and map data. As a demonstration of its capabilities, in this work we conduct a comprehensive empirical evaluation of existing trajectory datasets, providing users with a rich understanding of the data underpinning much of current pedestrian and AV motion forecasting research, and proposing suggestions for future datasets from these insights. trajdata is permissively licensed (Apache 2.0) and can be accessed online at https://github.com/NVlabs/trajdata

Trajectory prediction is fundamental in computer vision and autonomous driving, particularly for understanding pedestrian behavior and enabling proactive decision-making. Existing approaches in this field often assume precise and complete observational data, neglecting the challenges associated with out-of-view objects and the noise inherent in sensor data due to limited camera range, physical obstructions, and the absence of ground truth for denoised sensor data. Such oversights are critical safety concerns, as they can result in missing essential, non-visible objects. To bridge this gap, we present a novel method for out-of-sight trajectory prediction that leverages a vision-positioning technique. Our approach denoises noisy sensor observations in an unsupervised manner and precisely maps sensor-based trajectories of out-of-sight objects into visual trajectories. This method has demonstrated state-of-the-art performance in out-of-sight noisy sensor trajectory denoising and prediction on the Vi-Fi and JRDB datasets. By enhancing trajectory prediction accuracy and addressing the challenges of out-of-sight objects, our work significantly contributes to improving the safety and reliability of autonomous driving in complex environments. Our work represents the first initiative towards Out-Of-Sight Trajectory prediction (OOSTraj), setting a new benchmark for future research. The code is available at https://github.com/Hai-chao-Zhang/OOSTraj.

Flight trajectory data plays a vital role in the traffic management community, especially for downstream tasks such as trajectory prediction, flight recognition, and anomaly detection. Existing works often utilize handcrafted features and design models for different tasks individually, which heavily rely on domain expertise and are hard to extend. We argue that different flight analysis tasks share the same useful features of the trajectory. Jointly learning a unified representation for flight trajectories could be beneficial for improving the performance of various tasks. However, flight trajectory representation learning (TRL) faces two primary challenges, \ie unbalanced behavior density and 3D spatial continuity, which disable recent general TRL methods. In this paper, we propose Flight2Vec , a flight-specific representation learning method to address these challenges. Specifically, a behavior-adaptive patching mechanism is used to inspire the learned representation to pay more attention to behavior-dense segments. Moreover, we introduce a motion trend learning technique that guides the model to memorize not only the precise locations, but also the motion trend to generate better representations. Extensive experimental results demonstrate that Flight2Vec significantly improves performance in downstream tasks such as flight trajectory prediction, flight recognition, and anomaly detection.

This article presents an in-depth review of the topic of path following for autonomous robotic vehicles, with a specific focus on vehicle motion in two dimensional space (2D). From a control system standpoint, path following can be formulated as the problem of stabilizing a path following error system that describes the dynamics of position and possibly orientation errors of a vehicle with respect to a path, with the errors defined in an appropriate reference frame. In spite of the large variety of path following methods described in the literature we show that, in principle, most of them can be categorized in two groups: stabilization of the path following error system expressed either in the vehicle's body frame or in a frame attached to a "reference point" moving along the path, such as a Frenet-Serret (F-S) frame or a Parallel Transport (P-T) frame. With this observation, we provide a unified formulation that is simple but general enough to cover many methods available in the literature. We then discuss the advantages and disadvantages of each method, comparing them from the design and implementation standpoint. We further show experimental results of the path following methods obtained from field trials testing with under-actuated and fully-actuated autonomous marine vehicles. In addition, we introduce open-source Matlab and Gazebo/ROS simulation toolboxes that are helpful in testing path following methods prior to their integration in the combined guidance, navigation, and control systems of autonomous vehicles.

This work presents a novel online model-predictive trajectory planner for robotic manipulators called BoundMPC. This planner allows the collision-free following of Cartesian reference paths in the end-effector's position and orientation, including via-points, within desired asymmetric bounds of the orthogonal path error. The path parameter synchronizes the position and orientation reference paths. The decomposition of the path error into the tangential direction, describing the path progress, and the orthogonal direction, which represents the deviation from the path, is well known for the position from the path-following control in the literature. This paper extends this idea to the orientation by utilizing the Lie theory of rotations. Moreover, the orthogonal error plane is further decomposed into basis directions to define asymmetric Cartesian error bounds easily. Using piecewise linear position and orientation reference paths with via-points is computationally very efficient and allows replanning the pose trajectories during the robot's motion. This feature makes it possible to use this planner for dynamically changing environments and varying goals. The flexibility and performance of BoundMPC are experimentally demonstrated by two scenarios on a 7-DoF Kuka LBR iiwa 14 R820 robot. The first scenario shows the transfer of a larger object from a start to a goal pose through a confined space where the object must be tilted. The second scenario deals with grasping an object from a table where the grasping point changes during the robot's motion, and collisions with other obstacles in the scene must be avoided.

As AI agents move from chat interfaces to systems that read private data, call tools, and execute multi-step workflows, guardrails become a last line of defense against concrete deployment harms. In these settings, guardrail failures are no longer merely answer-quality errors: they can leak secrets, authorize unsafe actions, or block legitimate work. The hardest failures are often contextual: whether an action is acceptable depends on local privacy norms, organizational policies, and user expectations that resist pre-deployment specification. This creates a practical gap: guardrails must adapt to their own operating environments, yet deployment feedback is typically limited to sparse, noisy user-reported failures, and repeated fine-tuning is often impractical. To address this gap, we propose LiSA (Lifelong Safety Adaptation), a conservative policy induction framework that improves a fixed base guardrail through structured memory. LiSA converts occasional failures into reusable policy abstractions so that sparse reports can generalize beyond individual cases, adds conflict-aware local rules to prevent overgeneralization in mixed-label contexts, and applies evidence-aware confidence gating via a posterior lower bound, so that memory reuse scales with accumulated evidence rather than empirical accuracy alone. Across PrivacyLens+, ConFaide+, and AgentHarm, LiSA consistently outperforms strong memory-based baselines under sparse feedback, remains robust under noisy user feedback even at 20% label-flip rates, and pushes the latency--performance frontier beyond backbone model scaling. Ultimately, LiSA offers a practical path to secure AI agents against the unpredictable long tail of real-world edge risks.

We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used to select a safe but accessible landing site. We dropped two such capsules from the SuperBIT telescope, in September 2019. The capsules took ~37 minutes to descend from ~30 km altitude. They drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of their predicted landing sites. We found them easily, and successfully recovered the data. We welcome interest from other balloon teams for whom the technology would be useful.

Computer vision approaches are widely used by autonomous robotic systems to sense the world around them and to guide their decision making as they perform diverse tasks such as collision avoidance, search and rescue, and object manipulation. High accuracy is critical, particularly for Human-on-the-loop (HoTL) systems where decisions are made autonomously by the system, and humans play only a supervisory role. Failures of the vision model can lead to erroneous decisions with potentially life or death consequences. In this paper, we propose a solution based upon adaptive autonomy levels, whereby the system detects loss of reliability of these models and responds by temporarily lowering its own autonomy levels and increasing engagement of the human in the decision-making process. Our solution is applicable for vision-based tasks in which humans have time to react and provide guidance. When implemented, our approach would estimate the reliability of the vision task by considering uncertainty in its model, and by performing covariate analysis to determine when the current operating environment is ill-matched to the model's training data. We provide examples from DroneResponse, in which small Unmanned Aerial Systems are deployed for Emergency Response missions, and show how the vision model's reliability would be used in addition to confidence scores to drive and specify the behavior and adaptation of the system's autonomy. This workshop paper outlines our proposed approach and describes open challenges at the intersection of Computer Vision and Software Engineering for the safe and reliable deployment of vision models in the decision making of autonomous systems.

Density of the reachable states can help understand the risk of safety-critical systems, especially in situations when worst-case reachability is too conservative. Recent work provides a data-driven approach to compute the density distribution of autonomous systems' forward reachable states online. In this paper, we study the use of such approach in combination with model predictive control for verifiable safe path planning under uncertainties. We first use the learned density distribution to compute the risk of collision online. If such risk exceeds the acceptable threshold, our method will plan for a new path around the previous trajectory, with the risk of collision below the threshold. Our method is well-suited to handle systems with uncertainties and complicated dynamics as our data-driven approach does not need an analytical form of the systems' dynamics and can estimate forward state density with an arbitrary initial distribution of uncertainties. We design two challenging scenarios (autonomous driving and hovercraft control) for safe motion planning in environments with obstacles under system uncertainties. We first show that our density estimation approach can reach a similar accuracy as the Monte-Carlo-based method while using only 0.01X training samples. By leveraging the estimated risk, our algorithm achieves the highest success rate in goal reaching when enforcing the safety rate above 0.99.

Accurate prediction of pedestrians' future motions is critical for intelligent driving systems. Developing models for this task requires rich datasets containing diverse sets of samples. However, the existing naturalistic trajectory prediction datasets are generally imbalanced in favor of simpler samples and lack challenging scenarios. Such a long-tail effect causes prediction models to underperform on the tail portion of the data distribution containing safety-critical scenarios. Previous methods tackle the long-tail problem using methods such as contrastive learning and class-conditioned hypernetworks. These approaches, however, are not modular and cannot be applied to many machine learning architectures. In this work, we propose a modular model-agnostic framework for trajectory prediction that leverages a specialized mixture of experts. In our approach, each expert is trained with a specialized skill with respect to a particular part of the data. To produce predictions, we utilise a router network that selects the best expert by generating relative confidence scores. We conduct experimentation on common pedestrian trajectory prediction datasets and show that besides achieving state-of-the-art performance, our method significantly performs better on long-tail scenarios. We further conduct ablation studies to highlight the contribution of different proposed components.

Urban mobility is naturally expressed both as trajectories in space and as natural-language descriptions of travel intent, constraints, and preferences. However, prior work rarely evaluates these two modalities together on the same real-world trajectories: trajectory modeling often stays geometry-centric, while language-centric mobility benchmarks frequently target route planning and tool use rather than fine-grained, verifiable alignment between text and the underlying route. We introduce TrajPrism, a multi-task benchmark for language-trajectory alignment that unifies (i) instruction-conditioned trajectory generation, (ii) language-driven semantic trajectory retrieval, and (iii) trajectory captioning, together with an evaluation protocol that measures trajectory fidelity, retrieval quality, and language groundedness. We construct TrajPrism by pairing real urban trajectories with judge-filtered language annotations generated under a four-dimensional travel-intent taxonomy. The benchmark contains 300K selected trajectories across Porto, San Francisco, and Beijing, yielding 2.1M task instances from three instruction variants, three retrieval queries, and one caption per trajectory. We further develop proof-of-concept models for each task: TrajAnchor for instruction-conditioned trajectory generation, TrajFuse for semantic trajectory retrieval, and TrajRap for trajectory captioning. These models instantiate the proposed tasks and show that geometry-only trajectory baselines leave a large gap on our protocol, especially where language is part of the input-output interface. We release TrajPrism with code and a reproducible annotation pipeline that is designed to be portable across cities, given compatible trajectory inputs and map resources.

Autonomous vehicles drive millions of miles on the road each year. Under such circumstances, deployed machine learning models are prone to failure both in seemingly normal situations and in the presence of outliers. However, in the training phase, they are only evaluated on small validation and test sets, which are unable to reveal model failures due to their limited scenario coverage. While it is difficult and expensive to acquire large and representative labeled datasets for evaluation, large-scale unlabeled datasets are typically available. In this work, we introduce label-free model failure detection for lidar-based point cloud segmentation, taking advantage of the abundance of unlabeled data available. We leverage different data characteristics by training a supervised and self-supervised stream for the same task to detect failure modes. We perform a large-scale qualitative analysis and present LidarCODA, the first publicly available dataset with labeled anomalies in real-world lidar data, for an extensive quantitative analysis.

Large language model (LLM) agents increasingly rely on reusable external skills to solve long-horizon interactive tasks. Existing training-free skill adaptation pipelines usually update skills from full trajectories or session-level feedback, which makes failure attribution coarse and often produces unstable or overly broad revisions. We propose SkillAdaptor, a training-free step-level skill adaptation framework with explicit failure attribution, and it can plug into OpenClaw-class agent harnesses. Given a failed trajectory, SkillAdaptor identifies a first actionable fault step, links responsibility to candidate skills, and applies targeted updates under explicit acceptance checks while keeping the backbone frozen. We evaluate on WebShop, PinchBench, and Claw-Eval with Kimi-K2.5, GLM-5, and GPT-5.2. SkillAdaptor improves over no-skill and skill-adaptation baselines on all three suites, with the largest single-metric improvements of +1.5 points on PinchBench Avg Score%, +1.8 on Claw-Eval Avg Score, and +1.7 on WebShop success rate. These results indicate that step-level attribution supports more stable and auditable training-free skill maintenanceThe code will be released at https://github.com/zjunlp/SkillAdaptor..

As unmanned aerial systems (UASs) increasingly integrate into the US national airspace system, there is an increasing need to characterize how commercial and recreational UASs may encounter each other. To inform the development and evaluation of safety critical technologies, we demonstrate a methodology to analytically calculate all potential relative geometries between different UAS operations performing inspection missions. This method is based on a previously demonstrated technique that leverages open source geospatial information to generate representative unmanned aircraft trajectories. Using open source data and parallel processing techniques, we performed trillions of calculations to estimate the relative horizontal distance between geospatial points across sixteen locations.

Fast, geometry-generalizing surrogates for unsteady flow remain challenging. We present a time-dependent, geometry-aware Deep Operator Network that predicts velocity fields for moderate-Re flows around parametric and non-parametric shapes. The model encodes geometry via a signed distance field (SDF) trunk and flow history via a CNN branch, trained on 841 high-fidelity simulations. On held-out shapes, it attains sim 5% relative L2 single-step error and up to 1000X speedups over CFD. We provide physics-centric rollout diagnostics, including phase error at probes and divergence norms, to quantify long-horizon fidelity. These reveal accurate near-term transients but error accumulation in fine-scale wakes, most pronounced for sharp-cornered geometries. We analyze failure modes and outline practical mitigations. Code, splits, and scripts are openly released at: https://github.com/baskargroup/TimeDependent-DeepONet to support reproducibility and benchmarking.

Path-velocity decomposition is an intuitive yet powerful approach to address the complexity of kinodynamic motion planning. The difficult trajectory planning problem is solved in two separate, simpler, steps: first, find a path in the configuration space that satisfies the geometric constraints (path planning), and second, find a time-parameterization of that path satisfying the kinodynamic constraints. A fundamental requirement is that the path found in the first step should be time-parameterizable. Most existing works fulfill this requirement by enforcing quasi-static constraints in the path planning step, resulting in an important loss in completeness. We propose a method that enables path-velocity decomposition to discover truly dynamic motions, i.e. motions that are not quasi-statically executable. At the heart of the proposed method is a new algorithm -- Admissible Velocity Propagation -- which, given a path and an interval of reachable velocities at the beginning of that path, computes exactly and efficiently the interval of all the velocities the system can reach after traversing the path while respecting the system kinodynamic constraints. Combining this algorithm with usual sampling-based planners then gives rise to a family of new trajectory planners that can appropriately handle kinodynamic constraints while retaining the advantages associated with path-velocity decomposition. We demonstrate the efficiency of the proposed method on some difficult kinodynamic planning problems, where, in particular, quasi-static methods are guaranteed to fail.

In dynamic operational environments, particularly in collaborative robotics, the inevitability of failures necessitates robust and adaptable recovery strategies. Traditional automated recovery strategies, while effective for predefined scenarios, often lack the flexibility required for on-the-fly task management and adaptation to expected failures. Addressing this gap, we propose a novel approach that models recovery behaviors as adaptable robotic skills, leveraging the Behavior Trees and Motion Generators~(BTMG) framework for policy representation. This approach distinguishes itself by employing reinforcement learning~(RL) to dynamically refine recovery behavior parameters, enabling a tailored response to a wide array of failure scenarios with minimal human intervention. We assess our methodology through a series of progressively challenging scenarios within a peg-in-a-hole task, demonstrating the approach's effectiveness in enhancing operational efficiency and task success rates in collaborative robotics settings. We validate our approach using a dual-arm KUKA robot.

Ensuring vertical separation is a key means of maintaining safe separation between aircraft in congested airspace. Aircraft trajectories are modelled in the presence of significant epistemic uncertainty, leading to discrepancies between observed trajectories and the predictions of deterministic models, hampering the task of planning to ensure safe separation. In this paper a probabilistic model is presented, for the purpose of emulating the trajectories of aircraft in climb and bounding the uncertainty of the predicted trajectory. A monotonic, functional representation exploits the spatio-temporal correlations in the radar observations. Through the use of Gaussian Process Emulators, features that parameterise the climb are mapped directly to functional outputs, providing a fast approximation, while ensuring that the resulting trajectory is monotonic. The model was applied as a probabilistic digital twin for aircraft in climb and baselined against BADA, a deterministic model widely used in industry. When applied to an unseen test dataset, the probabilistic model was found to provide a mean prediction that was 21% more accurate, with a 34% sharper forecast.