hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1 Requirement QPSK, Fixed Reference Channel (FRC) H-Set 7 | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.1 Definition and applicability | The receiver performance of the High Speed Physical Downlink Shared Channel (HS-DSCH) with HS-SCCH-less operation in multi-path fading environment is determined by the information bit throughput R.
The requirements and this test apply to Release 7 and later releases for all types of UTRA for the FDD UE that support the... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.2 Minimum requirements | The requirements are specified in terms of a minimum information bit throughput R for the DL reference channels H-Set 7 specified in Annex C.8.1.7, with the addition of the parameters in Table 9.5.1.1 and the downlink physical channel setup according to table E.5.1.
Using this configuration the throughput shall meet or... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.3 Test purpose | To verify that UE is capable of decoding the HS-PDSCH on the first transmission without the HS-SCCH, and be capable of combining the first transmission and second transmissions. Corresponding throughput requirements are specified. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS (node B emulator) and fader and AWGN noise source to the UE antenna connector as shown in figure A.21 for UEs that support receive diversity or figure A.10 for UEs that do not support receive ... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.4.2 Procedure | 1) Once the HSDPA connection is setup, change levels according to Tables E.5.6 and start transmitting HSDPA Data.
2) The SS shall count the number of NACK, ACK and statDTX on the UL HS-DPCCH during the test interval and decide pass or fail according to Annex F.6.3 tables F.6.3.5.4.7.
Specific Message Contents
All messa... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.5.1.5 Test Requirements | The requirements are specified in terms of a minimum information bit throughput R for the DL reference channel H-Set 7 specified in Annex C.8.1.7. Tables 9.5.1.3 and 9.5.1.4 define the primary level settings including test tolerance for all relevant throughput tests. Table E.5.6 defines the secondary and subsequently r... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6 HS-DSCH and HS-SCCH reception in CELL-FACH state | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1 Single link HS-DSCH Demodulation performance in CELL_FACH state | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.1 Definition and applicability | The receiver single link performance of the High Speed Physical Downlink Shared Channel (HS-DSCH) is determined by the RLC SDU error rate (RLC SDU ER).
The requirements apply to Release 7 and later releases for all types of UTRA FDD UEs, being able to receive HS-DSCH and HS-SCCH in CELL_FACH state. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.2 Minimum requirement QPSK, Fixed Reference Channel (FRC) H-Set 3 | The requirements are specified in terms of a minimum RLC SDU error rate (RLC SDU ER) for the DL reference channel H-Set 3 (QPSK version) specified in C.8.1.3 with the addition of the parameters in Table 9.6.1.1 and the downlink physical channel setup according to table E.5.4C. For the test parameters specified in Table... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.3 Test purpose | To verify the ability of the receiver to receive a predefined test signal in cell FACH state, with SDU error ratio not falling below a specified value. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.4 Method of test | Editor’s note: This test is not complete |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS (node B emulator), multipath fading simulator and AWGN noise source to the UE antenna connector as shown in figure A.21 for UEs that support receive diversity or figure A.10 for UEs that do no... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.4.2 Procedure | 1. The SS sends [100] consecutive valid MAC headers and SDUs to the UE. The no of bits in 1 RLC SDU (2963 bits) shall fit into 1 transport block (3202 bits)
2. The SS counts the received RLC SDUs in uplink.
3. The SS accumulates the No of SDUs, sent in step 1 and the No of received SDUs in step 2 after each iteration ... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.1.5 Test Requirements | Tables 9.6.1.3 define the primary level settings including test tolerance for SDR error ratio. The pass / fail decision is done according to Annex F.6.3.
Tables 9.6.1.4 define the secondary and subsequently ranked level settings including test tolerance.
Table 9.6.1.3: Test requirement QPSK, Fixed Reference Channel (F... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2 Single link HS-SCCH Detection performance in CELL_FACH state | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.1 Definition and applicability | The detection performance of the HS-SCCH is determined by RLC SDU error rate (RLC SDU ER).
The requirements apply to Release 7 and later releases for all types of UTRA FDD UEs, being able to receive HS-DSCH and HS-SCCH in CELL_FACH state. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.2 Minimum requirement | For the test parameters specified in Table 9.6.2.1, for the value of HS-SCCH-1 Ec/Ior specified in Table 9.6.2.2 the measured RLC SDU ER shall be less than or equal to the corresponding specified value of RLC SDU ER. The downlink physical channel setup according to Table E.5.4C.
Table 9.6.2.1: Test parameters for HS-S... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.3 Test purpose | To verify the ability of the receiver to receive a predefined test signal in cell FACH state, with SDU error ratio not falling below a specified value. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.4 Method of test | Editor’s note: This test is not complete |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS (node B emulator), multipath fading simulator and AWGN noise source to the UE antenna connector as shown in figure A.21 for UEs that support receive diversity or figure A.10 for UEs that do no... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.4.2 Procedure | 1. The SS sends [100] consecutive valid MAC headers and SDUs to the UE. The no of bits in 1 RLC SDU (2963 bits) shall fit into 1 transport block (3202 bits)
2. The SS counts the received RLC SDUs in uplink.
3. The SS accumulates the No of SDUs, sent in step 1 and the No of received SDUs in step 2 after each iteratio... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 9.6.2.5 Test Requirements | Table 9.6.2.3 define the primary level settings including test tolerance for SDR error ratio. The pass / fail decision is done according to Annex F.6.3.
Tables 9.6.2.4 define the secondary and subsequently ranked level settings including test tolerance.
Table 9.6.2.3: Test requirement for HS-SCCH detection - single li... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.1 General | The performance requirements for the UE in this subclause are specified for the propagation conditions specified in Annex D.2 and the Downlink Physical channels specified in Annex E.5A.
Unless otherwise stated the performance requirements are specified at the antenna connector of the UE. For UE(s) with more than one re... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2 Detection of E-DCH HARQ ACK Indicator Channel (E-HICH) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1 Single link performance | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1 Single link performance (10ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) in different multi-path fading environments are determined by the missed ACK and false ACK values. The requirements and this test apply to Release 6 and later releases for all types of UTRA for the FDD UE that support E-DCH and HSDPA. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.2 Minimum requirement | For the parameters specified in Table 10.2.1.1.2.1 the average downlink E-HICH Ec/Ior power ratio shall be below the specified value for the missed ACK probabilities in Table 10.2.1.1.2.2. For the parameters specified in Table 10.2.1.1.2.1 the false ACK probability shall be below the specified value in Table 10.2.1.1.2... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.3 Test purpose | To verify that the average probability for missed ACK and false ACK when E-HICH is transmitted using 12 consecutive slots do not exceed the specified values. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulator to the UE antenna connector as shown in figure Figure A.10.
2) Set the test parameters for the missed ACK test and the false ACK test as specified in... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.1.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 2 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS reacts with E-HICH = ACK or DTX. The UE transmits new data or retransmissions on the corresponding E-DPCCH and E-DPDCH. The SS shall discr... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2 Single link performance (2ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) in different multi-path fading environments are determined by the missed ACK and false ACK values. The requirements and this test apply to Release 6 and later releases for all types of UTRA for the FDD UE that support E-DCH with 2ms TTI and H... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.2 Minimum requirement | For the parameters specified in Table 10.2.1.2.2.1 the average downlink E-HICH Ec/Ior power ratio shall be below the specified value for the missed ACK probabilities in Table 10.2.1.2.2.2 For the parameters specified in Table 10.2.1.2.2.1 the false ACK probability shall be below the specified value in Table 10.2.1.2.2... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.3 Test purpose | To verify that the average probability for missed ACK and false ACK, when E-HICH is transmitted using 3 consecutive slots, do not exceed the specified values. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulator to the UE antenna connector as shown in figure Figure A.10.
2) Set the test parameters for the missed ACK test and the false ACK test as specified in... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.1.2.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 2 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS reacts with E-HICH = ACK or DTX. The UE transmits new data or retransmissions on the corresponding E-DPCCH and E-DPDCH. The SS shall discr... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2 Detection in Inter-Cell Handover conditions | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1 RLS not containing the Serving E-DCH cell | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1 RLS not containing the Serving E-DCH cell (10ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) is determined during an inter-cell soft handover by the missed ACK and false ACK error probabilities. During the soft handover a UE receives signals from different cells. A UE has to be able to detect E-HICH signalling from different cells bel... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.2 Minimum requirement | For the parameters specified in Table 10.2.2.1.1.2.1 the average downlink E-HICH Ec/Ior power ratio of cell belonging to RLS not containing the Serving E-DCH cell shall be below the specified value for the missed ACK probabilities in Table 10.2.2.1.1.2.2. For the parameters specified in Table 10.2.2.1.1.2.1 the false A... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.3 Test Purpose | NOTE: Through all the text below including clause 10.2.2.1.5 the following abbreviation holds: Cell 1: cell belonging to RLS containing the Serving E-DCH cell, Cell 2: cell belonging to RLS not containing the Serving E-DCH cell
To verify that during an inter-cell soft handover for cell 2 the average probability for mi... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulators to the UE antenna connector as shown in figure Figure A.11.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11.
3) Set the... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 2 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS responds with E-HICH = ACK on the cell 2 and with E-HICH = NACK on the cell 1. The UE transmits new data or retransmissions on the corre... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.1.5 Test Requirements | For table 10.2.2.1.1.5.1, the average downlink E- HICH Ec/Ior power ratio shall be below the specified value for missed ACK probability in Table 10.2.2.1.1.5.2. For table 10.2.2.1.1.5.1, the false ACK probability shall be below the specified value in Table 10.2.2.1.1.5.3
Table 10.2.2.1.1.5.1: Requirement scenario param... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2 RLS not containing the Serving E-DCH cell (2ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) is determined during an inter-cell soft handover by the missed ACK and false ACK error probabilities. During the soft handover a UE receives signals from different cells. A UE has to be able to detect E-HICH signalling from different cells bel... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.2 Minimum requirement | For the parameters specified in Table 10.2.2.1.2.2.1 the average downlink E-HICH Ec/Ior power ratio of cell belonging to RLS not containing the Serving E-DCH cell shall be below the specified value for the missed ACK probabilities in Table 10.2.2.1.2.2.2. For the parameters specified in Table 10.2.2.1.2.2.1 the false A... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.3 Test Purpose | NOTE: Through all the text below including clause 10.2.2.1.2.5 the following abbreviation holds: Cell 1: cell belonging to RLS containing the Serving E-DCH cell, Cell 2: cell belonging to RLS not containing the Serving E-DCH cell
To verify that during an inter-cell soft handover for cell 2 the average probability for ... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulators to the UE antenna connector as shown in Figure A.11.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11.
3) Set the test p... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 2 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS responds with E-HICH = ACK on the cell 2 and with E-HICH = NACK on the cell 1. The UE transmits new data or retransmissions on the corre... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.1.2.5 Test Requirements | For table 10.2.2.1.2.5.1, the average downlink E- HICH Ec/Ior power ratio shall be below the specified value for missed ACK probability in Table 10.2.2.1.2.5.2. For table 10.2.2.1.2.5.1, the false ACK probability shall be below the specified value in Table 10.2.2.1.2.5.3
Table 10.2.2.1.2.5.1: Requirement scenario param... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2 RLS containing the Serving E-DCH cell | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1 RLS containing the Serving E-DCH cell (10ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) is determined during an inter-cell soft handover by the missed ACK and false ACK error probabilities. During the soft handover a UE receives signals from different cells. A UE has to be able to detect E-HICH signalling from different cells bel... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.2 Minimum requirement | For the parameters specified in Table 10.2.2.2.1.2.1 the average downlink E-HICH Ec/Ior power ratio of cell belonging to RLS containing the Serving E-DCH cell shall be below the specified value for the missed ACK probabilities in Table 10.2.2.2.1.2.2. For the parameters specified in Table 10.2.2.2.1.2.1 the false ACK p... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.3 Test purpose | NOTE: Through all the text below including clause 10.2.2.2.5 the following abbreviation holds: Cell 1: cell belonging to RLS containing the Serving E-DCH cell, Cell 2: cell belonging to RLS not containing the Serving E-DCH cell
To verify that during an inter-cell soft handover for cell 1 the average probability for mi... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulators to the UE antenna connector as shown in figure Figure A.11.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11.
3) Set the... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 3 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS responds with E-HICH = ACK or DTX on cell 1 and with NACK (DTX) on cell 2. The UE transmits new data or retransmissions on the correspondi... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.1.5 Test requirements | For table 10.2.2.2.1.5.1, the average downlink E- HICH Ec/Ior power ratio shall be below the specified value for missed ACK probability in Table 10.2.2.2.1.5.2. For table 10.2.2.2.5.1, the false ACK probability shall be below the specified value in Table 10.2.2.2.1.5.3.
Table 10.2.2.2.1.5.1: Requirement scenario parame... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2 RLS containing the Serving E-DCH cell (2ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.1 Definition and applicability | The receive characteristics of the E-DCH HARQ ACK Indicator Channel (E-HICH) is determined during an inter-cell soft handover by the missed ACK and false ACK error probabilities. During the soft handover a UE receives signals from different cells. A UE has to be able to detect E-HICH signalling from different cells bel... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.2 Minimum requirement | For the parameters specified in Table 10.2.2.2.2.2.1 the average downlink E-HICH Ec/Ior power ratio of cell belonging to RLS containing the Serving E-DCH cell shall be below the specified value for the missed ACK probabilities in Table 10.2.2.2.22..2. For the parameters specified in Table 10.2.2.2.2.2.1 the false ACK p... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.3 Test purpose | NOTE: Through all the text below including clause 10.2.2.2.5 the following abbreviation holds: Cell 1: cell belonging to RLS containing the Serving E-DCH cell, Cell 2: cell belonging to RLS not containing the Serving E-DCH cell
To verify that during an inter-cell soft handover for cell 1 the average probability for mi... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulators to the UE antenna connector as shown in figure Figure A.11.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11.
3) Set the... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.4.2 Procedure | NOTE: The measurement principle for the missed ACK test (step 2 to 5) and for the false ACK test (step 6 to 9) is as follows. Upon the UE transmission on E-DPCCH and E-DPDCH, the SS responds with E-HICH = ACK or DTX on cell 1 and with DTX on cell 2. The UE transmits new data or retransmissions on the corresponding E-DP... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.2.2.2.2.5 Test requirements | For table 10.2.2.2.2.5.1, the average downlink E- HICH Ec/Ior power ratio shall be below the specified value for missed ACK probability in Table 10.2.2.2.2.5.2. For table 10.2.2.2.2.5.1, the false ACK probability shall be below the specified value in Table 10.2.2.2.2.5.3.
Table 10.2.2.2.2.5.1: Requirement scenario para... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3 Detection of E-DCH Relative Grant Channel (E-RGCH) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1 Single link performance | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1 Single link performance (10ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.1 Definition and applicability | The receive characteristics of the E-DCH Relative Grant Channel (E-RGCH) in multi-path fading environment is determined by the missed UP/DOWN and missed HOLD. The requirements and this test apply to Release 6 and later releases for all types of UTRA for the FDD UE that support E-DCH and HSDPA.
NOTE: The fail cases for... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.2 Minimum requirement | For the parameters specified in Table 10.3.1.1.2.1 the average downlink E-RGCH Ec/Ior power ratio shall be below the specified value for the missed UP/DOWN probabilities in Table 10.3.1.1.2.2. For the parameters specified in Table 10.3.1.1.2.1 the missed HOLD probability shall be below the specified value in Table 10.3... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.3 Test purpose | To verify that average probability for missed up down and average probability for missed hold, when E-RGCH is transmitted using 12 consecutive slots, do not exceed specified values. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulator to the UE antenna connector as shown in figure Figure A.10.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11
3) Set the t... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.4.2 Procedure | NOTE: The measurement principle for the missed up down test (step 3 to 10) and for the missed hold test (step 11 to 15) is as follows. The UE transmits E-DPCCH and E-DPDCH. The SS transmits E-RGCH up or down or hold (DTX). The UE changes or holds the transport format of the corresponding E-DPCCH and E-DPDCH accordingly... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.1.5 Test requirements | Table 10.3.1.1.5.1: Test Parameters for E-RGCH – Serving E-DCH cell
Parameter
Unit
Missed UP/DOWN
Missed HOLD
dBm/3.84 MHz
-60
Phase reference
-
P-CPICH
E-RGCH
dB
-30.9 (test 1)
-∞ (test 2)
E-RGCH signalling pattern
-
50% UP
50% DOWN
100% HOLD
Table 10.3.1.1.5.2: Test requirement for Missed UP/DOWN when relative schedu... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2 Single link performance (2ms TTI) | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.1 Definition and applicability | The receive characteristics of the E-DCH Relative Grant Channel (E-RGCH) in multi-path fading environment is determined by the missed UP/DOWN and missed HOLD. The requirements and this test apply to Release 6 and later releases for all types of UTRA for the FDD UE that support E-DCH with 2ms TTI and HSDPA.
NOTE: The f... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.2 Minimum requirement | For the parameters specified in Table 10.3.1.2.2.1 the average downlink E-RGCH Ec/Ior power ratio shall be below the specified value for the missed UP/DOWN probabilities in Table 10.3.1.2. 2.2 and
For the parameters specified in Table 10.3.1.2.2.1 the missed HOLD probability shall be below the specified value in Table ... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.3 Test purpose | To verify that average probability for missed up down and average probability for missed hold when E-RGCH is transmitted using 12 consecutive slots do not exceed specified values. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.4 Method of test | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
1) Connect the SS and AWGN noise source and fading simulator to the UE antenna connector as shown in figure Figure A.10.
2) The UL Reference Measurement Channel parameters are defined in Annex C.11
3) Set the t... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.4.2 Procedure | NOTE: The measurement principle for the missed up down test (step 3 to 10) and for the missed hold test (step 11 to 15) is as follows. The UE transmits E-DPCCH and E-DPDCH. The SS transmits E-RGCH up or down or hold (DTX). The UE changes or holds the transport format of the corresponding E-DPCCH and E-DPDCH accordingly... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.1.2.5 Test requirements | Table 10.3.1.2.5.1: Test Parameters for E-RGCH – Serving E-DCH cell
Parameter
Unit
Missed UP/DOWN
Missed HOLD
dBm/3.84 MHz
-60
Phase reference
-
P-CPICH
E-RGCH
dB
-24.3 (test 1)
-∞ (test 2)
E-RGCH signalling pattern
-
50% UP
50% DOWN
100% HOLD
Table 10.3.1.2.5.2: Test requirement for Missed UP/DOWN when relative schedu... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.2 Detection in Inter-Cell Handover conditions | |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.2.1 Definition and applicability | The receive characteristics of the E-DCH Relative Grant Channel (E-RGCH) is determined during an inter-cell soft handover by the missed UP/DOWN and missed HOLD error probabilities. During the soft handover a UE receives signals from different cells. A UE has to be able to detect E-RGCH signalling from different cells, ... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.2.2 Minimum requirement for Non-serving E-DCH RL | For the parameters specified in Table 10.3.2.2.1 the missed HOLD probability shall be below the specified value in Table 10.3.2.2.2. For the parameters specified in Table 10.3.2.2.1 the average downlink E-RGCH Ec/Ior power ratio shall be below the specified value for the missed DOWN probabilities in Table 10.3.2.2.3.
T... |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.2.3 Test Purpose | To verify that during an inter-cell soft handover the average probability for missed HOLD and the average probability for missed DOWN do not exceed specified values. |
19eaceb417a28bf040422bcad9ef7619 | 34.121-1 | 10.3.2.4 Method of test |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.