hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.2.3 Test purpose | To test the behaviour of the UE if the network rejects the location updating of the UE with the cause "PLMN not allowed". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.2.4 Method of test | Proc 1: Test procedure 1: Location updating / rejected / PLMN not allowed / test 1
Initial conditions
- System Simulator:
- one cell: C, belonging to PLMN1;
- two cells: A and B, belonging to different location areas a and b and belonging to PLMN2. PLMN2 is different from HPLMN and from PLMN1;
- IMSI attach/detach is a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.2.5 Test requirement | 1) 1.1 At step 12 in test 1 the UE shall not perform periodic updating.
1.2 At step 14 in test 1 the UE shall not initiate an RRC connection establishment (IMSI detach).
1.3 At step 16 in test 1 the UE shall not initiate an RRC connection establishment (IMSI attach).
1.4 At step 16 in test 1 the UE shall not perform no... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3 Location updating / rejected / location area not allowed | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3.2 Conformance requirement | 1) If the network rejects a location updating from the UE with the cause "Location Area not allowed" the UE shall:
1.1 not perform periodic updating;
1.2 not respond to paging with TMSI;
1.3 reject any request from CM entity for MM connection other than for emergency call;
1.4 not perform IMSI detach.
1.5 not delete th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3.3 Test purpose | To test the behaviour of the UE if the network rejects the location updating of the UE with the cause "Location Area not allowed".
To test that the UE deletes the list of forbidden LAs after switch off (power off). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3.4 Method of test | Initial conditions
- System Simulator:
- three cells: A, B and C, belonging to different location areas a, b and c. Cell A and B belongs to PLMN1. Cell C belongs to PLMN2.
- IMSI attach/detach is allowed in both cells;
- the T3212 time-out value is 1/10 hour in both cells;
- Sintersearch values for cells A and B are 20... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.3.5 Test requirement | 1) 1.1 At step 10 the UE shall not perform periodic updating.
1.2 At step 12 the UE shall not respond to paging with TMSI.
1.3 At step 14 the UE shall not initiate an RRC connection establishment.
1.4 At step 26 the UE shall not initiate an RRC connection establishment (IMSI detach).
1.5 At step 39 the UE shall perform... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4 Location updating / rejected / roaming not allowed in this location area | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.2 Conformance requirement | 1) If the network rejects a location updating from the UE with the cause "Roaming not allowed in this location area" the UE shall:
1.1 not perform periodic updating;
1.2 void;
1.3 reject any request from CM entity for MM connection other than for emergency call;
1.4 not perform IMSI detach.
2) If the network rejects a ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.3 Test purposes | Test purpose 1
To test that on receipt of a rejection using the Roaming cause code, the UE ceases trying to update on that cell, that this situation continues for at least one periodic location interval period, and that the corresponding list is re-set by switching off the UE or removing its power source.
Test purpose ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.4 Method of test | Initial conditions
The initial conditions shall be met before each of the different procedures.
- System Simulator:
- for procedures 1, 2, 3 and 5: Two cells A and B, belonging to different location areas of the same PLMN with LAI a and b. The MCC of that PLMN is the same as that of the HPLMN. The MNC of that PLMN is d... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.4.1 Test Procedures | Proc 1: Test procedure 1
- The SS rejects a normal location updating with the cause value "Roaming not allowed in this location area". The RRC CONNECTION is released. The SS checks that the UE does not perform periodic location updating procedure. The UE is turned off and then on. The SS checks that the UE performs loc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.4.5 Test requirement | 1) 1.1 At step 10 in Procedure 1 the UE shall not perform periodic updating.
1.2 Void.
1.3 At step 21 in procedure 2 the UE shall not initiate an RRC connection establishment.
1.4 After step 13 in Procedure 5 the UE shall perform location updating (at step 16; not perform IMSI detach).
2) 2.1 After step 9 in Procedure ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.2 At step 23 in Procedure 2 the UE shall initiate a RRC CONNECTION REQUEST message with the establishment cause set to "Emergency call"; | 2.3 At step 14 in Procedure 4 the UE shall attempt to location updating with location updating type "periodic" (at step 21: UE returns to HPLMN in preference to any other available cell).
3) After step 12 in Procedure 5 the UE shall perform location updating (at step 16) when the USIM is inserted.
4) At step 49 in Proc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5 Location updating / rejected / No Suitable Cells In Location Area | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5.2 Conformance requirement | 1) If the network rejects a location updating from the UE with the cause " No Suitable Cells In Location Area " the UE shall:
1.1 perform normal location updating at a suitable cell in another location area in the same PLMN,
1.2 not delete the list of "equivalent PLMNs".
Reference(s)
TS 24.008 clause 4.4.4.7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5.3 Test purpose | To test the behaviour of the UE if the network rejects the location updating of the UE with the cause "No Suitable Cells In Location Area". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B, belonging to different location areas a and b and belonging to PLMN1;
- one cell: C, belonging to PLMN2;
- one cell: D, belonging to PLMN3;
- IMSI attach/detach is allowed in cells A, B, C and D;
NB: i) Cell C will be mapped to Cell 4 as found in TS 34.108 cl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.5.5 Test requirement | At step 12 the UE shall perform normal location updating on cell C. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6 Location updating / rejected / Not authorized for this CSG | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6.2 Conformance requirement | 1) If the network rejects a location updating procedure from the User Equipment with the cause ' Not authorized for this CSG ' the User Equipment shall:
1.1 not delete the list of "equivalent PLMNs"
1.2 remove the CSG ID of the cell where the UE has sent the LOCATION UPDATING REQUEST message from the allowed CSG list s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6.3 Test purpose | To verify that the UE removes the CSG ID from the Allowed CSG list and searches for a suitable cell in the same PLMN If the network rejects the location updating of the UE with the cause ' Not authorized for this CSG '. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6.4 Method of test | Initial conditions
System Simulator:
- Four cells: A, B, C and D, belonging to different location areas a, b, c and d. Cell A, B, C and D belong to PLMN1 and operating in network operation mode II.
- IMSI attach/detach is allowed in all cells;
NB: i) Cell A, B, C and D will be mapped to Cell 1, 2, 3 and 7 respectively ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.2.6.5 Test requirements | At step 1, UE Allowed CSG List shall contain CSG 1 and CSG 2.
At step 4, when the UE receives LOCATION UPDATING REJECT, UE shall:
- delete the CSG1 from the Allowed CSG List.
- Allowed CSG List shall contain only CSG 2.
At step 7, the UE shall perform normal location updating on Cell C. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3 Location updating / abnormal cases | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.1 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2 Location updating / abnormal cases / attempt counter less or equal to 4, LAI different | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2.2 Conformance requirement | 1) When a failure such as cases d), f), g) and h) of clause 4.4.4.9 of TS 24.008 has occurred during a normal location updating procedure, if the attempt counter is smaller than 4 and after expiry of T3211, the UE shall resend its LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE se... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2.3 Test purpose | To verify that the UE performs normal location updating procedures when its attempt counter is smaller than 4.
To check that the UE does not perform the IMSI detach procedure when "idle not updated".
To verify that when "idle not updated" the UE can perform an emergency call.
To verify that when "idle not updated" the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B of the same PLMN, belonging to different location areas with LAI a and b;
- ATT flag shall be set to IMSI attach/detach allowed.
- User Equipment:
- the UE is "idle updated" on cell A. A valid CKSN value is stored in the USIM and is noted "initial CKSN". A TMS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.2.5 Test requirement | 1) At step 13 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE set to "no key available" and the Location Updating Type IE set to "normal location updating".
2)
2.1 At step 40 the UE shall not answer to paging with the previously allocated TMSI.
2.2 At step 43 t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3 Location updating / abnormal cases / attempt counter equal to 4 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3.2 Conformance requirement | 1) When four failures such as cases d) to h) of clause 4.4.4.9 of TS 24.008 have occurred during a normal location updating procedure the UE shall:
1.1 For Rel-6 and later, the UE shall:
Optionally enter the MM IDLE sub-state PLMN SEARCH (according to subclause 4.2.1.2).
1.2 Or according to subclause 4.2.2.2 the UE sha... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3.3 Test purpose | To verify that the UE performs normal location updating procedures after T3212 expiry, when its attempt counter has reached value 4 and that the UE reset its attempt counter after a timer T3212 expiry.
To verify that the UE still follows the MM IDLE state and ATTEMPTING TO UPDATE substate requirements after its attempt... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B, belonging to different location areas a and b;
- IMSI attach/detach is allowed in both cells;
- T3212 is set to 6 minutes.
- User Equipment:
- the UE is "Idle updated" on cell B with a valid CKSN and a TMSI.
Related ICS/IXIT statements
USIM removal possible w... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.3.5 Test requirement | 1) 1.1 At step 33 the UE shall perform location updating procedure.
1.2 At step 41 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE set to "no key is available" and the Location Updating type IE set to "normal location updating".
2) At step78 the UE shall send a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 4.1 At step128 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE set to "no key is available" and the Location Updating type IE set to "normal location updating" (Applicable only for R5 or earlier UE); | 4.2 At step 134 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE set to "no key is available" and the Location Updating type IE set to "normal location updating".
5) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 5.1 At step 179 the UE shall perform a normal location updating procedure if it enters a new cell; | 5.2 At step 185 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to its IMSI, CKSN IE set to "no key is available" and the Location Updating type IE set to "normal location updating".
9.4.3.3a Location updating / abnormal cases / attempt counter equal to 4
9.4.3.3a.1 Definition and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4 Location updating / abnormal cases / attempt counter less or equal to 4, stored LAI equal to broadcast LAI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4.2 Conformance requirement | 1) When a failure such as cases d), f), g) and h) of clause 4.4.4.9 of TS 24.008 has occurred during a periodic location updating procedure (the broadcast LAI is equal to the stored LAI):
1.1 the UE shall be able to establish an MM connection i.e. send a RRC CONNECTION REQUEST message and then a CM SERVICE REQUEST mess... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4.3 Test purpose | To verify that in the case when the attempt counter is smaller than 4 and the broadcast LAI is equal to the stored LAI, the UE is in the MM IDLE state and NORMAL SERVICE substate. To verify that timer T3211 is stopped after a MM connection establishment.
To verify that the UE uses the T3211 timer. and that it enters th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4.4 Method of test | Initial conditions
- System Simulator:
- one cell: B, belonging to location area b;
- IMSI attach/detach is allowed;
- T3212 is set to 6 minutes.
- User Equipment:
- the UE is "Idle updated" on cell B with a valid CKSN and a TMSI.
Related ICS/IXIT statements
USIM removal possible while UE is powered Yes/No.
Switch off ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.4.5 Test requirement | 1) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 1.1 At step 8 the UE shall send a RRC CONNECTION REQUEST message and at step 11 the UE shall send a CM SERVICE REQUEST message, CKSN and LAI set to those which have been allocated to the UE, Mobile Identity IE set to the TMSI which has been allocated to the UE; | 1.2 At step 11 the UE shall not attempt a location updating procedure.
2) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 2.1 At step 31 the UE shall send a RRC CONNECTION REQUEST message and at step 34 the UE shall send a CM SERVICE REQUEST message, CKSN and LAI set to those which have been allocated to the UE, Mobile Identity IE set to the TMSI which has been allocated to the UE; | 2.2 At step 39 the UE shall not attempt a location updating procedure.
3) At step 51 the UE shall send a LOCATION UPDATING REQUEST message with the Mobile Identity IE set to the TMSI which has been allocated to the UE, CKSN IE and LAI set to those which have been allocated to the UE and the Location Updating Type IE se... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5 Location updating / abnormal cases / Failure due to non-integrity protection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5.2 Conformance requirement | Except the messages listed below, no layer 3 signalling messages shall be processed by the receiving MM and GMM entities or forwarded to the CM entities, unless the security mode control procedure is activated for that domain.
- MM messages:
- AUTHENTICATION REQUEST
- AUTHENTICATION REJECT
- IDENTITY REQUEST
- LOCATION... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5.3 Test purpose | To verify that the UE ignores NAS signalling messages when the security mode procedure is not activated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B, belonging to different location areas a and b, both cells are on the same PLMN.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated" on cell A.
Related ICS/IXIT statements
None.
Test Procedure
The location updating procedure is started. Upon rece... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.5.5 Test requirement | At step 8 the UE shall ignore the first LOCATION UPDATING ACCEPT message.
At step 14 the UE shall send LOCATION UPDATING REQUEST message after expiry of timer T3211.
At step 16 the UE shall respond to TMSI REALLOCATION COMPLITE message after the UE receives the second LOCATION UPDATING ACCEPT message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.6 Location updating /abnormal cases / CS domain is changed from barred to unbarred because of domain specific access control | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.6.1 Definition | This test is applicable for Rel-5 UEs supporting DSAC and Rel-6 or later UEs.
9.4.3.6.2 Conformance requirement
TS 24.008 clause 4.1.1.2.2
If the PS or CS domain is barred because of domain specific access control, a GPRS MS operating in mode A or B in a network that operates in mode II or III shall use the MM specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.6.3 Test purpose | To test the behaviour of the UE if the CS domain is barred and if it is then changed from barred to unbarred because of domain specific access control in a network that operates mode II. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.6.4 Method of test | Initial condition
An access class x (0-15) is arbitrarily chosen. The USIM is programmed with this access class x. The UE is informed that the CS domain specific access class x is barred in cell B.
System Simulator:
- two cells, A and B, belonging to different location areas with location area identification a and b of... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.6.5 Test requirements | At step 2, cell B is serving cell, the CS domain specific access class x is barred:
- the UE shall not use the specific MM location updating procedure.
At step 6, cell B is serving cell, the CS domain specific access class x is not barred anymore:
- the UE shall initiate a location updating procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7 Location updating / abnormal cases / Network reject with Extended Wait Timer | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7.2 Conformance requirement | The different abnormal cases that can be identified are the following:
a) Access barred because of access class control
The location updating procedure is not started. The mobile station stays in the current serving cell and applies normal cell reselection process. The procedure is started as soon as possible and if st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7.3 Test purpose | 1) To verify that the LAP indicator can be set in the UE.
2) To verify that the Delay Tolerant indicator is sent by the UE.
3) To verify that the UE uses the back-off timer if the network reject a request with the Extended Wait timer. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B, belonging to different location areas a and b.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated" on cell A.
- The UE is equipped with a USIM containing default values except for those listed below.
USIM field
Value
EFUST
Service 96 is supporte... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.3.7.5 Test requirement | 1) At step 5 the UE shall include the IE “Device properties", set to “MS is configured for NAS signalling low priority”, in the LOCATION UPDATING REQUEST.
2) At step 8 the UE shall not initiate any communication attempts.
3) At step 2 and 9 the UE shall send RRC CONNECTION REQUEST message with "Establishment cause": de... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4 Location updating / release / expiry of T3240 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4.2 Conformance requirement | The UE receiving a LOCATION UPDATING ACCEPT message shall start T3240: it shall abort the RR connection at the expiry of timer T3240.
References
TS 24.008 clauses 4.4.4.8 and 11.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4.3 Test purpose | To verify that the UE aborts the RR-connection at the expiry of timer T3240. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4.4 Method of test | Initial conditions
- System Simulator:
- two cells: A and B, belonging to different location areas a and b, both cells are on the same PLMN.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated" on cell A.
Related ICS/IXIT statements
None.
Test Procedure
A normal location updating procedure is performed. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.4.5 Test requirement | At step 8 the UE shall abort the RR connection. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5 Location updating / periodic | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1 Location updating / periodic spread | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1.2 Conformance requirement | 1) The UEs shall perform spreading of the time before performing a periodic location updating when the location updating timer value is reduced.
2) The UE shall reset timer T3212 when the UE is deactivated, and shall start with a value between zero and the broadcasted value when reactivated in the same cell, IMSI attac... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1.3 Test purpose | 1) To check that when the location updating timer is reduced, the timer running in the UE is started with a value depending on the current timer value and the new broadcasted T3212 value.
2) To verify that when the UE is reactivated in the same cell (as the one in which it was deactivated), IMSI attach being forbidden,... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1.4 Method of test | Initial conditions
- System Simulator:
- one cell, T3212 is set to 30 minutes;
- IMSI attach is allowed in the cell;
- User Equipment:
- the UE is deactivated. The stored MCC, MNC and LAC correspond to the broadcasted values. The stored update status is "updated".
Related ICS/IXIT statements
None.
Test procedure
The UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.1.5 Test requirement | At step 10 the UE shall send an RRC CONNECTION REQUEST for a periodic location updating.
At step 21 the UE shall send an RRC CONNECTION REQUEST for a periodic location updating. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2 Location updating / periodic normal / test 1 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2.2 Conformance requirement | 1 The UE shall stop and reset the timer T3212 of the periodic location updating procedure when the first MM message is received or SECURITY mode setting is completed in the case of MM connection establishment.
2 The UE shall stop and reset the timer T3212 of the periodic location updating procedure when the UE has resp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2.3 Test purpose | To verify that the UE stops and resets the timer T3212 of the periodic location updating procedure when:
- the first MM-message is received in the case of MM-connection establishment, security mode being not set;
- the UE has responded to paging and the first correct L3 message that is not an RRC message is received.
N... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2.4 Method of test | Initial conditions
- System Simulator:
- 1 cell, default parameters;
- IMSI attach/detach is allowed;
- the T3212 time-out value is 2/10 hour.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated".
Related ICS/IXIT statements
None.
Test procedure
An UE originated MM connection is established and cleared. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.2.5 Test requirement | At step 10 the UE shall initiate an RRC CONNECTION REQUEST 12 minutes after the release of the RRC CONNECTION (at step 7).
At step 25 the UE shall initiate an RRC CONNECTION REQUEST 12 minutes after the release of the RRC CONNECTION (at step 22). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3 Location updating / periodic normal / test 2 | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3.2 Conformance requirement | When a LOCATION UPDATING ACCEPT or a LOCATION UPDATING REJECT message is received, the timer T3212 is stopped and reset and the UE shall perform a periodic location updating after T3212 expiry.
References
TS 24.008 clause 4.4.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3.3 Test purpose | To verify that the UE stops and resets the timer T3212 of the periodic location updating procedure when a LOCATION UPDATING ACCEPT message is received.
NOTE: T3212 is stopped when the MM-idle state is left and restarted when the MM sublayer returns to that state, substate NORMAL SERVICE or ATTEMPTING TO UPDATE. As a co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3.4 Method of test | Initial conditions
- System Simulator:
- 2 cells, IMSI attach/detach is allowed in both cells;
- T3212 is set to 6 minutes;
- two cells: A and B of the same PLMN, belonging to different location areas with LAI a and b.
- User Equipment:
- the UE has a valid TMSI. It is "idle updated" on cell A.
Related ICS/IXIT statem... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.3.5 Test requirement | After step 28 the UE shall performs an IMSI attach.
After step 33 the UE shall performs periodic location updating 6 minutes after step 28. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4 Location updating / periodic search for HPLMN or higher priority PLMN when in VPLMN | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1 Location updating / periodic search for HPLMN or higher priority PLMN / UE waits time T | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1.2 Conformance requirement | 1. In the case that the mobile has a stored "Equivalent PLMNs" list the mobile shall only select a PLMN if it is of a higher priority than those of the same country as the current serving PLMN which are stored in the "Equivalent PLMNs" list.
2. In steps i), ii) and iii) of the Automatic Network Selection Mode Procedure... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 9.4.5.4.1.3 Test purpose | To verify that if a UE is camped on a VPLMN it will perform a search for higher priority networks (e.g. HPLMN) with a periodicity of T, which is the Search Period stored in the USIM.
This test will confirm that, if a cell from a new PLMN becomes available, within a time T the UE will perform a location updating on it o... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.