hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.6.4 Method of test | Initial condition
System Simulator:
Three cells, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC2/RAC1 (RAI-3), cell C in MCC2/MNC1/LAC1/RAC1 (RAI-2)
All three cells are operating in network operation mode I.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.6.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step9, when the UE enters a suitable cell in a different location area on the same PLMN, UE shall:
- perform the PS attach procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7 PS detach / rejected / Roaming not allowed in this location area | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7.2 Conformance requirement | 1) If the network performs a PS detach procedure with the cause 'Roaming not allowed in this location area' the User Equipment shall:
1.1 delete any RAI, P-TMSI, P-TMSI signature and PS ciphering key sequence number.
1.2 set the GPRS update status to GU3 ROAMING NOT ALLOWED.
1.3 reset the attach attempt counter.
1.4 st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7.3 Test purpose | To test the behaviour of the UE if the network orders the PS detach procedure with the cause ' Roaming not allowed in this location area '. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7.4 Method of test | Initial condition
System Simulator:
Three cells (not simultaneously activated), cell A in MCC2/MNC1/LAC1/RAC1 (RAI-2, Not HPLMN), cell B in MCC2/MNC1/LAC1/RAC2 (RAI-7, Not HPLMN), cell C in MCC2/MNC1/LAC2/RAC1 (RAI-6, Not HPLMN).
All cells are operating in network operation mode I.
NB: i) Cell C will be mapped to Cell ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.7.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step8, when the UE receive the DETACH REQUEST message (Detach type = 're-attach not required', Cause = ' Roaming not allowed in this location area'... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8 PS detach / rejected / PS services not allowed in this PLMN | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8.2 Conformance requirement | If the network performs a PS detach procedure with the cause ' GPRS services not allowed in this PLMN ', the UE:
1. shall delete any RAI, P-TMSI, P-TMSI signature, and PS ciphering key sequence number stored, shall set the PS update status to GU3 ROAMING NOT ALLOWED (and shall store it according to section 4.1.3.2) and... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8.3 Test purpose | Test purpose for Test procedure1
To test the behaviour of the UE if the network initiates a PS detach procedure with the cause "GPRS services not allowed in this PLMN" (for Conformance requirement1, 2).
Test purpose for Test procedure2
To test the behaviour of the UE operating in UE operation mode A in network operatio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8.4 Method of test | Proc 1: Test procedure 1
Initial conditions
System Simulator:
Two cells cellA in MCC2/MNC1/LAC1/RAC1(RAI-2, Not HPLMN), cellB in MCC1/MNC2/LAC2/RAC1.
Both cells are operating in network operation mode II.
The PLMN contains Cell B is equivalent to the PLMN that contains Cell A.
The SIB1 IE "CN domain specific NAS system... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.3.2.8.5 Test Requirement | Test Requirement for Test procedure1
At step4, when the UE is powered up or switched on, the UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step11, when the UE receives DETACH REQUEST message with the cause "GPRS services not allowed in this PLMN"... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4 Routing area updating procedure | This procedure is used to update the actual routing area of an UE in the network. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1 Normal routing area updating | The routing area updating procedure is a GMM procedure used by PS UEs of UE operation mode A or C that are IMSI attached for PS services only.
12.4.1.1a Routing area updating / accepted
12.4.1.1a.1 Definition
12.4.1.1a.2 Conformance requirement
1) If the network accepts the routing area updating procedure and reallocat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2 Routing area updating / rejected / IMSI invalid / illegal ME | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2.2 Conformance requirement | 1) If the network rejects a routing area updating procedure from the User Equipment with the cause 'Illegal ME', the User Equipment shall consider USIM invalid for PS services until power is switched off or USIM is removed.
2) If the network rejects a routing area updating procedure from the User Equipment with the cau... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2.3 Test purpose | To test the behaviour of the UE if the network rejects the routing area updating procedure of the UE with the cause 'Illegal ME'. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2.4 Method of test | Initial condition
System Simulator:
Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4), cell C in MCC2/MNC1/LAC1/RAC1 (RAI-2).
All three cells are operating in network operation mode II (in case of UE operation mode A)
The SIB1 IE "CN domain specific... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.2.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step8, UE shall;
- initiate the routing area updating procedure with the information elements specified in the above Expected Sequence.
At step11, a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3 Routing area updating / rejected / UE identity cannot be derived by the network | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3.2 Conformance requirement | If the network rejects a routing area updating procedure from the User Equipment with the cause 'MS identity cannot be derived by the network', the User Equipment shall delete the stored RAI, PS-CKSN, P-TMSI and P-TMSI signature.
Depending on the manufacturer the UE may or may not perform a PS attach procedure.
Referen... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3.3 Test purpose | To test the behaviour of the UE if the network rejects the routing area updating procedure of the UE with the cause 'MS identity cannot be derived by the network'. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3.4 Method of test | Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Both cells are operating in network operation mode II (in case of UE operation mode A).
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.3.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step9, UE shall;
- initiate the routing area updating procedure with the information elements specified in the above Expected Sequence.
UE shall per... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5 Routing area updating / abnormal cases / attempt counter check / miscellaneous reject causes | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5.2 Conformance requirement | When a routing area updating procedure is rejected with the attempt counter less than five, the UE shall repeat the routing area updating procedure after T3311 timeout.
When a T3311 timeout has occurred during a routing area updating procedure with the attempt counter five, the UE shall start timer T3302.
When the T330... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5.3 Test purpose | To test the behaviour of the UE with respect to the attempt counter. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5.4 Method of test | Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4). The ATT-flag shall indicate that the MS should use IMSI attach/detach procedures.
Both cells are operating in network operation mode II (in case of UE operation mod... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.5.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step8, UE shall:
- perform the routing area updating procedure.
UE shall perform the following actions depending on the conditions described below.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6 Routing area updating / abnormal cases / change of cell into new routing area | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6.2 Conformance requirement | When a change of cell into a new routing area is performed before the routing area updating procedure is finished, the UE shall abort the routing area updating procedure and re-initiate it in the new routing area.
Reference
3GPP TS 24.008 clause 4.7.5.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6.3 Test purpose | To test the behaviour of the UE in case of procedure collision. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6.4 Method of test | Initial condition
System Simulator:
Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4) and cell C In MCC1/MNC1/LAC1/RAC3 (RAI-5).
All cells are operating in network operation mode II (in case of UE operation mode A).
The SIB1 IE "CN domain specific N... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.6.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step9, UE shall:
- initiate the routing area update procedure.
At step13, when change of cell into a new routing area is performed before the routin... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.7 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8 Routing area updating / abnormal cases / P-TMSI reallocation procedure collision | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8.2 Conformance requirement | When a P-TMSI reallocation COMMAND message is received by the UE while waiting for a ROUTING AREA UPDATE ACCEPT message, the UE shall ignore the P-TMSI reallocation procedure and continue with the routing area updating procedure.
Reference
3GPP TS 24.008 clause 4.7.5.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8.3 Test purpose | To test the behaviour of the UE in case of procedure collision. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8.4 Method of test | Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1) and cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Both cells are operating in network operation mode II (in case of UE operation mode A).
The SIB1 IE "CN domain specific NAS system information", for the CS Domai... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.8.5 Test requirements | At step4, when the UE is powered up or switched on, UE shall:
- initiate the PS attach procedure with the information elements specified in the above Expected Sequence.
At step9, UE shall:
- initiate the routing area updating procedure.
At step11, when a P-TMSI REALLOCATION COMMAND message is received from SS while wai... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9 Routing area updating / EAB active | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9.1 Definition | Test to verify that the UE does not perform Routing area updating if the network broadcast EAB and EAB is enabled in the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9.2 Conformance requirement | - For generic location updating, GPRS attach and routing area updating procedures the mobile station shall evaluate the control information for:
- common access control (as specified in 3GPP TS 44.018 [84], 3GPP TS 44.060 [76], and 3GPP TS 25.331 [23c]);
- domain specific access control (as specified in 3GPP TS 44.018 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9.3 Test purpose | To verify that the UE does not perform Routing area updating if the network broadcast EAB and EAB is enabled in the UE |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9.4 Method of test | Initial conditions:
- System Simulator:
- Two cells, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4),
- All 2 cells are operating in network operation mode II.
- The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.1.9.5 Test requirement | At step 14, The UE shall not initiate a Routing area updating procedure as access class x is barred in EAB information.
At step 16, The UE shall transmit a RRC CONNECTION REQUEST message on cell B to initiate a Routing area updating procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2 Combined routing area updating | The combined routing area updating procedure is a GMM procedure used by PS UEs of UE operation mode A that are IMSI attached for PS and non-PS services. In order to use the combined routing area updating procedure, the network must operate in network operation mode I. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1 Combined routing area updating / combined RA/LA accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1.2 Conformance requirement | 1) If the network accepts the combined routing area updating procedure and reallocates a P-TMSI, the UE shall acknowledge the new P-TMSI and continue communication with the new P-TMSI.
2) If the network accepts the combined routing area updating procedure from the UE without reallocation of the old P-TMSI, the UE shall... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1.3 Test purpose | To test the behaviour of the UE if the network accepts the combined routing area updating procedure.
The following cases are identified:
1) P-TMSI / P-TMSI signature is reallocated.
2) Old P-TMSI / P-TMSI signature is not changed.
3) Mobile terminating CS call is allowed with IMSI.
4) Mobile terminating CS call is allo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1.4 Method of test | Initial condition
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Both cells operating in network operation mode I.
User Equipment:
The UE has a valid IMSI.
Related ICS/IXIT statements
Support of PS service Yes/No
UE operation mode A Yes/No
Switch off on butt... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.1.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step7, when the RF level of the attached cell is lower than the RF level of the new cell, UE shall:
- initiate the combined routing area update... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2 Combined routing area updating / UE in CS operation at change of RA | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2.2 Conformance requirement | PS UE in UE operation mode A that is in an ongoing CS transaction at change of routing area shall initiate the normal routing area updating procedure.
Reference
3GPP TS 24.008 clause 4.7.5.2.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2.3 Test purpose | To test the behaviour of the UE if the routing area is changed during an ongoing circuit switched transmission. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2.4 Method of test | Initial condition
System Simulator:
One cell, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1) is operating in network operation mode I.
User Equipment:
The UE has a valid IMSI.
Related ICS/IXIT statements
Support of PS service Yes/No
UE operation mode A Yes/No
Switch off on button Yes/No
Automatic PS attach procedure at swit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.2.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step9, when the UE has received the new RAI from the SS in the UTRAN MOBILITY INFORMATION message, the UE shall:
- initiate the normal routing ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3 Combined routing area updating / RA only accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3.2 Conformance requirement | 1) If the network accepts the combined PS attach procedure, but GMM cause code 'IMSI unknown in HLR' is sent to the UE the User Equipment shall delete the stored TMSI, LAI and CKSN. The User Equipment shall consider USIM invalid for non-PS services until power is switched off or USIM is removed.
2) If the network accep... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3.3 Test purpose | Test purpose 1
To test the behaviour of the UE if the network accepts the routing area updating procedure with indication RA only, GMM cause 'IMSI unknown in HLR'.
Test purpose 2
To test the behaviour of the UE if the network accepts the routing area updating procedure with indication RA only, GMM cause 'MSC temporaril... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3.4 Method of test | Proc 1: Test Procedure 1
Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Both cells operating in network operation mode I.
User Equipment:
The UE has a valid IMSI.
Related ICS/IXIT statements
Support of PS servic... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.3.5 Test requirements | Test requirements for Test Procedure 1
At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step7, when the RF level of the attached cell is lower than the RF level of the new cell, UE shall:
- in... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4 Combined routing area updating / rejected / PLMN not allowed | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4.2 Conformance requirement | 1) If the network rejects a combined routing area updating procedure from the User Equipment with the cause 'PLMN not allowed' the User Equipment shall:
1.1 not perform combined GPRS attach when switched on in the same location area or PLMN, except when the PLMN identity is equal to the HPLMN.
1.2 delete the stored RAI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4.3 Test purpose | To test the behaviour of the UE if the network rejects the combined routing area updating procedure of the UE with the cause 'PLMN not allowed'. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4.4 Method of test | Initial condition
System Simulator:
Four cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1 (RAI-8), cell B in MCC1/MNC2/LAC1/RAC2 (RAI-10), cell D in MCC2/MNC1/LAC1/RAC1 (RAI-2) and cell E in MCC1/MNC3/LAC1/RAC1 (RAI-11).
The PLMN containing Cell E is equivalent to the PLMN that contains Cell A.
All f... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.4.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step9, when the RF level of the attached cell is lower than the RF level of the new cell, UE shall:
◦ - initiate the combined routing area upda... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6 Combined routing area updating / abnormal cases / access barred due to access class control | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6.2 Conformance requirement | 1) The UE shall not perform combined routing area updating procedure, but stays in the current serving cell and applies normal cell reselection process.
2) The User Equipment shall perform the combined routing area updating procedure when:
2.1 Access is granted.
2.2 Cell is changed.
Reference
3GPP TS 24.008 clause 4.7.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6.3 Test purpose | Test purpose 1
To test the behaviour of the UE in case of access class control (access is granted).
Test purpose 2
To test the behaviour of the UE in case of access class control (cell is changed). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6.4 Method of test | Proc 1: Test procedure 1
Initial condition
An access class x (0-15) is arbitrarily chosen. The USIM is programmed with this access class x. Communication with User Equipments using access class x is initially indicated to be barred on Cell B.
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.6.5 Test requirements | Test requirements for Test procedure 1
At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step8, when the access class x is barred , UE shall:
- not perform the combined routing area updating pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7 Combined routing area updating / abnormal cases / attempt counter check / procedure timeout | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7.2 Conformance requirement | 1) When a T3330 timeout has occurred during a routing area updating procedure, the UE shall repeat the routing area updating procedure after T3330 timeout until the procedure is repeated five times.
2) When a routing area updating procedure is repeated five times, the routing area updating attempt counter is incremente... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7.3 Test purpose | To test the behaviour of the UE with respect to the attempt counter. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7.4 Method of test | Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4).
Both cells are operating in network operation mode I.
User Equipment:
The UE has a valid IMSI. UE is Idle Updated on cell A.
Related ICS/IXIT statements
Support of ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.7.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with information elements specified in the above Expected Sequence.
At step8, when the RF level of the attached cell is lower than the RF level of the new cell, UE shall:
- initiate the combined routing area updati... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8 Combined routing area updating / abnormal cases / change of cell into new routing area | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8.2 Conformance requirement | When a change of cell into a new routing area is performed before the routing area updating procedure is finished, the UE shall abort the routing area updating procedure and re-initiate it in the new routing area.
Reference
3GPP TS 24.008 clause 4.7.5.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8.3 Test purpose | To test the behaviour of the UE in case of procedure collision. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8.4 Method of test | Initial condition
System Simulator:
Three cells, cell A in MCC1/MNC1/LAC1/RAC1 (RAI-1), cell B in MCC1/MNC1/LAC1/RAC2 (RAI-4), cell C in MCC1/MNC1/LAC1/RAC3 (RAI-5).
All three cells are operating in network operation mode I.
User Equipment:
The UE has a valid IMSI.
Related ICS/IXIT statements
Support of PS service Yes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.8.5 Test requirements | At step3, when the UE is powered up or switched on, UE shall:
- initiate the combined PS attach procedure with the information elements specified in the above Expected Sequence.
At step8, when the RF level of the attached cell is lower than the RF level of the new cell, UE shall:
- initiate the routing area update proc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.9 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.10 Combined routing area updating / abnormal cases / PS detach procedure collision | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.10.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.4.2.10.2 Conformance requirement | 1) When a detach request is received with detach type 're-attach required or' or 're-attach not required' by the UE while waiting for a ROUTING AREA UPDATE ACCEPT message, the UE shall terminate the routing area updating procedure and continue with the PS detach procedure.
2) When a detach request is received with deta... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.