hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.1.2 Test purpose | To verify that the MS, after receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the assignment using the description for before the time, and eventually starts using the freq... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.1.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_H... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.2 Dedicated assignment with starting time / successful case / time elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.2.1 Conformance requirement | A Mobile Station receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the assignment on the channels as described for after the starting time.
The Mobile Station shall ac... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.2.2 Test purpose | To verify that the MS, after receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, performs correctly the assignment using the frequency parameters for after the time if the indicated time has already elapsed when the Mobile Station is ready t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.2.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_H... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.3 Dedicated assignment with starting time and frequency redefinition / failure case / time not elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.3.1 Conformance requirement | An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening dedicated assignment, and, in case of failure of this assignment resulting in a return to the old channel before the time indicated in the FREQUENCY REDEF... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.3.2 Test purpose | To verify that the MS, after receiving a FREQUENCY REDEFINITION and then an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the assignment and returning on the old channel, and ready to access before the time indicated in the FREQUENCY REDEFI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.3.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_H... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.4 Dedicated assignment with starting time and frequency redefinition / failure case / time elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.4.1 Conformance requirement | An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening dedicated assignment, and, in case of failure of this assignment resulting in a return to the old channel after the time indicated in the FREQUENCY REDEFI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.4.2 Test purpose | To verify that the MS, after receiving a FREQUENCY REDEFINITION and then an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the assignment and returning on the old channel, and ready to access after the time indicated in the FREQUENCY REDEFIN... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.4.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.5 Handover with starting time / successful case / time not elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.5.1 Conformance requirement | A Mobile Station receiving an HANDOVER COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access before the indicated time has elapsed, shall perform the handover on the channels as described for before the starting time and shall, if specified, use t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.5.2 Test purpose | To verify that the MS, after receiving a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the handover using the description for before the time, and then starts using the frequency param... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.5.3 Method of test | Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.6 Handover with starting time / successful case / time elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.6.1 Conformance requirement | A Mobile Station receiving a HANDOVER COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the handover on the channels as described for after the starting time.
The Mobile Station shall accept ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.6.2 Test purpose: | To verify that the MS, after receiving a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to transmit after the indicated time, performs correctly the handover using the frequency parameters for after the time. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.6.3 Method of test | Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.7 Handover with starting time and frequency redefinition / failure case / time not elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.7.1 Conformance requirement | An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening handover, and, in case of failure of this handover resulting in a return to the old channel before the time indicated in the FREQUENCY REDEFINITION messag... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.7.2 Test purpose: | To verify that the MS, after receiving a FREQUENCY REDEFINITION and then a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the handover, and ready to access on the old channel before the time indicated in the FREQUENCY REDEFINITION, resumes tra... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.7.3 Method of test | Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.8 Handover with starting time and frequency redefinition / failure case / time elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.8.1 Conformance requirement | An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening handover, and, in case of failure of this handover resulting in a return to the old channel after the time indicated in the FREQUENCY REDEFINITION message... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.8.2 Test purpose: | To verify that the MS, after receiving a FREQUENCY REDEFINITION and then a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the handover and returning on the old channel, and ready to access after the time indicated in the FREQUENCY REDEFINITION... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.8.3 Method of test | Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"Idle, upda... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.9 Immediate assignment with starting time / successful case / time not elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.9.1 Conformance requirement | A Mobile Station receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions for both after and before the starting time, and ready to access before the indicated time has elapsed, shall perform the assignment on the channels as described for before the starting time and shall start using th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.9.2 Test purpose | To verify that the MS, after receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the assignment using the description for before the time, and then starts using the frequenc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.9.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_H... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.10 Immediate assignment with starting time / successful case / time elapsed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.10.1 Conformance requirement | A Mobile Station receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the assignment on the channels as described for after the starting time.
Reference(s):
3GPP TS 04.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.10.2 Test purpose | To verify that the MS, after receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions both for before and after the starting time, performs correctly the assignment using the frequencies and hopping sequence for after the time if the indicated time has already elapsed when the Mobile Stat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.13.10.3 Method of test | Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_H... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.18 Default contents of PCS 1 900 layer 3 messages for RR tests | This subclause contains the default values of PCS 1 900 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the PCS 1 900 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.21 Default contents of GSM 710 layer 3 messages for RR tests | This subclause contains the default values of GSM 710 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 710 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23 Test of Repeated SACCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1 Repeated SACCH / Downlink Repeated SACCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1.1 Conformance requirement | If a downlink SACCH block is incorrectly decoded (prior to combining with any previously received SACCH block), and the next uplink SACCH block is not a repetition as per the Repeated SACCH procedure (see sub-clause 11.3), then the MS shall set the SACCH Repetition Request in the next uplink SACCH block to "Repeated SA... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1.2 Test purpose | To verify that when the downlink SACCH block is wrongly decoded, the MS sends an uplink SACCH block containing SACCH Repetition Request set to "Repeated SACCH required" and when the downlink SACCH block is decoded correctly, the MS sends an uplink SACCH block containing SACCH Repetition Request set to "Repeated SACCH n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1.3 Method of test | Specific PICS statements:
-
PIXIT statements:
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
U0, null. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1.4 Test procedure | a) A MS terminated call is set up according to the generic call set up procedure.
b) For 10 secs, the SS sends error free SACCH messages.
c) SS Sends one SACCH messages with unrecoverable errors.
d) For 10 secs the SS shall continuously send error free SACCH messages. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.1.5 Test requirement | 1) In step b, check that all the uplink SACCH messages have SACCH Repetition Request set to “Repeated SACCH not required”
2) After step c, check that the MS sends a SACCH message having SACCH Repetition Request set to “Repeated SACCH required”.
3) In step d, check that all the uplink SACCH messages have SACCH Repetitio... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.2 Repeated SACCH / Uplink Repeated SACCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.2.1 Conformance requirement | At the MS side, if an uplink SACCH block contains a SAPI 0 frame and is not already a repetition, and if the last correctly received SACCH Repetition Order was set to "Repeated SACCH required", then the MS shall repeat this SACCH block at the next SACCH block period.
References
3GPP TS 44.006 clause 11.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.2.2 Test purpose | To verify that the MS repeats an uplink SACCH block when the downlink SACCH blocks contains SACCH Repetition Order set to "Repeated SACCH required". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.2.3 Method of test | Initial conditions
System Simulator:
1 cell, default parameters
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
U0, null.
26.6.23.2.4 Test procedure
a) A MS terminated call is set up according to the generic ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.2.5 Test requirement | 1) In step c, check that MS is not retransmitting the SACCH messages on uplink.
2) After step d, Check that the MS repeats the last message.
3) In step e, check that MS is not retransmitting the SACCH messages on uplink.
Specific Message Contents
None. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.3 Repeated SACCH / Uplink Repeated SACCH with SAPI 3 frames | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.3.1 Conformance requirements | At the MS side, if an uplink SACCH block contains a SAPI 0 frame and is not already a repetition, and if the last correctly received SACCH Repetition Order was set to "Repeated SACCH required", then the MS shall repeat this SACCH block at the next SACCH block period. If a SAPI 3 frame was also scheduled to be sent at t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.3.2 Test purpose | To verify that the MS delays sending of a SAPI 3 frame by one SACCH period if a repeated SAPI 0 SACCH frame is to be repeated according to the SACCH Repetition Parameter in the downlink SACCH block. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.6.23.3.3 Method of test | Initial Conditions
System simulator:
1 cell, default parameters.
Mobile Station:
The MS shall be in "Idle, updated" state.
Specific PICS Statements
-
PIXIT Statements
- Description of the basic procedures to display a mobile originated short message.
- Maximum length (characters) of a mobile originated short message.
F... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.0 Default contents of messages | Default contents SYSTEM INFORMATION messages and default settings
For cell A and B
For GSM use 26.6.14. For DCS use 26.6.15, for PCS 1 900 use 26.6.18, for GSM 450 use 26.6.16, for GSM 480 use 26.6.17, for GSM 750 use 26.6.19, for GSM 850 use 26.6.20, for GSM 710 use 26.6.21 and for T-GSM 810 use 26.6.22.
Cell C
The c... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.1 TMSI reallocation | The intention of the TMSI Reallocation procedure is to assign a new temporary identity for the MS. If the message is not understood by the MS, the network could not establish a link to the MS. As this is a common MM procedure, it can be initiated at any time. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.1.1 Conformance requirement | 1) A Mobile Station shall acknowledge a new TMSI when explicitly allocated during a location updating procedure or an incoming call.
2) The TMSI shall be updated on the SIM when the Mobile Station is correctly deactivated in accordance with the manufacturer's instructions.
3) A Mobile Station shall answer paging with t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.1.2 Test purpose | To verify that the MS is able to receive and acknowledge a new TMSI by means of an explicit TMSI reallocation procedure.
To verify that the MS has stored the TMSI in a non-volatile memory.
The implicit reallocation procedure is tested in subclause 26.7.4.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.1.3 Method of test | Initial conditions
System Simulator:
Two cells A and B, belonging to different location areas a and b, default parameters.
Mobile Station:
The MS has valid TMSI (= TMSI1), CKSN, Kc. It is "idle updated" on cell B.
Specific PICS statements:
- On/Off switch (TSPC_Feat_OnOff)
PIXIT statements:
-
Foreseen final state of th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2 Authentication | The purpose of this procedure is to verify the user identity. A correct response is essential to guarantee the establishment of the connection. If not, the connection will drop.
For GSM Authentication Challenge (i.e. Authentication with a SIM as defined in Annex A4 or GSM AKA using a USIM as defined TS 33.102) the SS s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.1 Authentication accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.1.1 Conformance requirement | 1) A Mobile Station shall correctly respond to an Authentication Request message by sending an Authentication Response message with the SRES information field set to the same value as the one produced by the authentication algorithm in the network.
2) A Mobile Station shall indicate in a Paging Response message the cip... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.1.2 Test purpose | 1) To check that a Mobile Station correctly responds to an Authentication Request message by sending an Authentication Response message with the SRES information field set to the same value as the one produced by the authentication algorithm in the network.
2) To check that a Mobile Station indicates in a Paging Respon... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.1.3 Method of test | Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS has valid TMSI, CKSN (CKSN1), Kc. It is "idle updated" on the cell.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
The MS has valid TMSI, CKSN and Kc. It is "idle updated" on the cell.
Test Procedure
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.2 Authentication rejected | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.2.1 Conformance requirement | 1) After reception of an Authentication Reject message the Mobile Station shall:
1.1 not perform normal location updating.
1.2 not perform periodic location updating.
1.3 not respond to paging with TMSI.
1.4 reject any request from CM entity for MM connection except for emergency call.
1.5 not perform IMSI detach if de... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.2.2 Test purpose | 1) To check that ,after reception of an Authentication Reject message, the Mobile Station:
1.1 does not perform normal location updating.
1.2 does not perform periodic location updating.
1.3 does not respond to paging with TMSI.
1.4 rejects any request from CM entity for MM connection except for emergency call.
1.5 doe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.2.3 Method of test | Initial conditions
System Simulator:
Two cells: A and B, belonging to different location areas a and b.
IMSI attach/detach is allowed in both cells.
The T3212 time-out value is 1/10 hour in both cells.
Mobile Station:
The MS has valid TMSI, CKSN (CKSN2) and Kc. It is "idle updated" on cell B.
Specific PICS statements:
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.3 Authentication accepted with USIM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.3.1 Conformance requirement | The mobile station shall be ready to respond upon an AUTHENTICATION REQUEST message at any time whilst a RR connection exists. With exception of the cases described in subclause 4.3.2.5.1, it shall process the challenge information and send back an AUTHENTICATION RESPONSE message to the network.
This IE (AUTN) shall be... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.3.2 Test purpose | To check that a Mobile Station with an USIM inserted:
1) correctly responds to an Authentication Request message including an UMTS authentication challenge by sending an Authentication Response message with the RES information field set to the same value as the one produced by the UMTS authentication algorithm in the n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.3.3 Method of test | Initial conditions
System Simulator:
1 cell, Rel-99 MSC .
Mobile Station:
Test USIM is plugged into the MS.
The MS has valid TMSI. It is "idle updated" on the cell.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
The MS has valid TMSI, CKSN and Kc. It is "idle updated" on the cell.
Test P... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.4 Authentication not accepted by MS with USIM (MAC Failure) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.4.1 Conformance requirement | In a UMTS authentication challenge, the authentication procedure is extended to allow the MS to check the authenticity of the core network. Thus allowing, for instance, detection of false base station.
Following a UMTS authentication challenge, the MS may reject the core network, on the grounds of an incorrect AUTN par... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.4.2 Test purpose | To check that a Mobile Station with an USIM inserted:
1) correctly responds to an AUTHENTICATION REQUEST message, with a MAC code failure in the AUTN parameter, by sending an AUTHENTICATION FAILURE message with the reject cause 'MAC failure'.
2) identifies itself upon reception of an IDENTITY REQUEST message, by sendi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.4.3 Method of test | Initial conditions
System Simulator:
1 cell, Rel-99 MSC .
Mobile Station:
Test USIM is plugged into the MS.
The MS has valid TMSI. It is "idle updated" on the cell.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
The MS has valid TMSI, CKSN and Kc. It is "idle updated" on the cell.
Test P... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.5 Authentication not accepted by MS with USIM (Synch Failure) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.5.1 Conformance requirement | In a UMTS authentication challenge, the authentication procedure is extended to allow the MS to check the authenticity of the core network. Thus allowing, for instance, detection of false base station.
Following a UMTS authentication challenge, the MS may reject the core network, on the grounds of an incorrect AUTN par... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.5.2 Test purpose | To check that a Mobile Station with an USIM inserted:
1) correctly responds to an AUTHENTICATION REQUEST message, with an SQN failure in the AUTN parameter, by sending an AUTHENTICATION FAILURE message with the reject cause 'Synch failure'.
2) sends the AUTHENTICATION RESPONSE message to the network if a second AUTHENT... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.2.5.3 Method of test | Initial conditions
System Simulator:
1 cell, Rel-99 MSC .
Mobile Station:
Test USIM is plugged into the MS.
The MS has valid TMSI. It is "idle updated" on the cell.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
The MS has valid TMSI, CKSN and Kc. It is "idle updated" on the cell.
Test P... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3 Identification | The purpose of this procedure is to check that the MS gives its identity as requested by the network. If this procedure does not work, it will not be possible for the network to rely on the identity claimed by the MS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1 General Identification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1.1 Conformance requirement | 1) When requested by the network the Mobile Station shall send its IMSI.
2) When requested by the network the Mobile Station shall send the TMSI which it was previously allocated.
3) When requested by the network the Mobile Station shall send its IMEI as stored in the Mobile Equipment.
4) When requested by the network ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1.2 Test purpose | 1) To verify that the MS sends identity information as requested by the system in the following cases: IMSI and TMSI are requested in non-ciphered mode, IMEI is requested in ciphered mode.
2) To verify that the MS sends its IMEI, when requested to do so, in non-ciphered mode.
3) To verify that the MS sends its IMEISV, ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1.3.1 Identification / test 1 | Initial conditions
System Simulator:
1 cell, default values.
Mobile Station:
The MS has a valid TMSI. It is "idle updated" on the cell.
Specific PICS statements:
-
PIXIT statements:
- IMEI of the MS
Foreseen final state of the MS
The MS has a valid TMSI. It is "idle updated" on the cell.
Test Procedure
The SS requests ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.1.3.2 Identification / test 2 | Initial conditions
System Simulator:
1 cell, default values.
Mobile Station:
The MS has a valid TMSI. It is in "idle updated".
Specific PICS statements:
-
PIXIT statements:
- IMEI of the MS
- IMEISV of the MS
Foreseen final state of the MS
The MS has a valid TMSI. It is "idle updated".
Test Procedure
The SS requests id... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.2 Handling of IMSI shorter than the maximum length | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.2.1 Conformance requirement | The MS shall be capable of handling an IMSI that is not of the maximum length.
Reference(s)
3GPP TS 04.08 / 3GPP TS 24.008 subclause 10.5.1.4. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.2.2 Test purpose | To check that the MS behaves correctly when activated with an IMSI of length less than the maximum length.
In this condition, the MS shall:
- perform location updating;
- answer to paging with IMSI;
- give the correct IMSI when asked by an IDENTITY REQUEST;
- attempt CM connection establishment when requested to;
- att... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.3.2.3 Method of test | Initial conditions
System Simulator:
1 cell, default values.
IMSI attach/detach bit set to "1".
Mobile Station:
The MS has no valid TMSI.
It is "idle updated".
The IMSI has the value 001011234.
Specific PICS statements:
- On/Off switch (TSPC_Feat_OnOff)
PIXIT statements:
-
Foreseen final state of MS
The MS has no valid... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4 Location updating | This procedure is used to register the MS in the network. If it is not performed correctly, no call can be established. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1 Location updating / accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1.1 Conformance requirement | 1.
1.1 If the network accepts a location updating from the Mobile Station and reallocates a TMSI in the Location Updating Accept message the Mobile Station shall acknowledge the reception of the new TMSI.
1.2 The Mobile Station shall answer to paging with this TMSI and include it in a Paging Response message.
2 If the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1.2 Test purpose | 1) To test the behaviour of the MS if the network accepts the location updating of the MS.
For the network response three different cases are identified:
1.1) TMSI is allocated;
1.2) Location updating accept contains neither TMSI nor IMSI;
1.3) Location updating accept contains IMSI.
2) To verify that the MS , that sup... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1.3.1 Location Updating/accepted/test1 | Initial conditions:
System Simulator:
Two cells, A and B, belonging to different location areas with location area identification a and b of the same PLMN.
IMSI attach/detach is allowed in both cells.
The T3212 time-out value is 1/10 hour in both cells.
Mobile Station:
The MS has a valid TMSI (=TMSI1) and CKSN (=CKSN1)... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.7.4.1.3.2 Location Updating/accepted/test2 | Initial conditions:
System Simulator:
Two cells, A and B, belonging to different location areas with location area identification a and b of the same PLMN.
System information2ter is broadcasted on the two cells (Cell A with L2pseudolength=18, Cell B with L2pseudolength=0) .
IMSI attach/detach is allowed in both cells.
... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.