hash
stringlengths
32
32
doc_id
stringlengths
5
12
section
stringlengths
5
1.47k
content
stringlengths
0
6.67M
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.5.1 Definition
The call control entity of the MS being in the state, U9, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one MT circuit switched basic service, for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.5.2 Conformance requirement
1) A CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", upon receipt of a RELEASE shall return a RELEASE COMPLETE and enter the CC-state U0, "Null". 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.4. 2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to t...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.5.3 Test purpose
1) To verify that a CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null". 2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile ter...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.5.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U9 by using table 26.8.1.3/4. Foreseen final state of the MS U0, null. Maximum duration of test ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.6 Incoming call / U9 mobile terminating call confirmed / lower layer failure
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.6.1 Definition
The call control entity of the MS being in the state, U9, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one MT circuit switched basic service, for which immediate connect ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.6.2 Conformance requirement
1) A CC entity of the MS in CC-state U9, "MS Terminating Call Confirmed", having detected a lower layer failure shall return to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null". References 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3, 5.5...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.6.3 Test purpose
To verify that a CC entity of the MS in CC-state U9, "MS Terminating Call Confirmed", having detected a lower layer failure returns to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.6.4 Method of test
Specific PICS statements - Support of UTRAN Radio Access Technology (TSPC_Type_UTRAN) PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U9 by using table 26.8.1.3/4. Foresee...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.7 Incoming call / U9 mobile terminating call confirmed / unknown message received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.7.1 Definition
The call control entity of the MS being in the state, U9, an unknown message is received by the MS. This test is applicable for any equipment supporting at least MT circuit switched basic service, for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.7.2 Conformance requirement
1) A CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed" having received an unknown message from its peer entity shall return a STATUS message. References 3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.7.3 Test purpose
To verify that a CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed" having received an unknown message from its peer entity returns a STATUS message.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.3.7.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U9 by using table 26.8.1.3/4. Foreseen final state of the MS U9, mobile terminating call proceed...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4 Incoming call / U7 call received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.1 Incoming call / U7 call received / call accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.1.1 Definition
The call control entity of the MS being in the state, U7, a user accepts the incoming call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.1.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", upon a user accepting the incoming call, shall send a CONNECT message to its peer entity and enter the CC-state U8, "Connect Request". References 3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2, 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.2.2.5.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.1.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", upon a user accepting the incoming call, shall send a CONNECT message to its peer entity and enter the CC-state U8, "Connect Request"
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.1.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/3. Foreseen final state of the MS U8, connect request. Maximum durati...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.2 Incoming call / U7 call received / termination requested by the user
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.2.1 Definition
The call control entity of the MS being in the state, U7, a user requests to terminate incoming call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.2.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", upon request by the user to terminate shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". References 3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2, 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.3.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.2.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.2.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/3. Foreseen final state of the MS U11, disconnect request. Maximum du...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.3 Incoming call / U7 call received / DISCONNECT received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.3.1 Definition
The call control entity of the MS being in the state, U7, a DISCONNECT message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.3.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", upon receipt of a DISCONNECT with a progress indicator indicating in-band information from network, if a TCH was not assigned, shall return a RELEASE message and enter the CC-state U19, "Release Request". References 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.4.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.3.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", upon receipt of a DISCONNECT with a progress indicator indicating in-band information from network, if a TCH was not assigned, returns a RELEASE message and enters the CC-state U19, "Release Request".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.3.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/1. Foreseen final state of the MS U19, release request. Maximum durat...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.4 Incoming call / U7 call received / RELEASE received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.4.1 Definition
The call control entity of the MS being in the state, U7, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.4.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", upon receipt of a RELEASE shall return a RELEASE COMPLETE and enter the CC-state U0, "Null". 2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to the seven mobile terminating transaction identifiers shall be in CC...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.4.3 Test purpose
1) To verify that a CC entity of a MS in CC-state U7, "Call Received", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null". 2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile terminating transacti...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.4.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/1. Foreseen final state of the MS U0, null. Maximum duration of test ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.5 Incoming call / U7 call received / lower layer failure
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.5.1 Definition
The call control entity of the MS being in the state, U7, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which imm...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.5.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", having detected a lower layer failure shall return to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null". References 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3, 5.5.3.2 and 8.3.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.5.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", having detected a lower layer failure returns to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.5.4 Method of test
Specific PICS statements - Support of UTRAN Radio Access Technology PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/2. Foreseen final state of t...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.6 Incoming call / U7 call received / unknown message received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.6.1 Definition
The call control entity of the MS being in the state, U7, an unknown message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.6.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", having received an unknown message from its peer entity shall return a STATUS message. References 3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.6.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", having received an unknown message from its peer entity returns a STATUS message.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.6.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/3. Foreseen final state of the MS U7, call received. Maximum duration...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.7 Incoming call / U7 call received / TCH assignment
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.7.1 Definition
The call control entity of the MS being in the state, U7, an assignment procedure is performed for traffic channel. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.7.2 Conformance requirement
1) A CC entity of a MS in CC-state U7, "Call Received", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress. References 3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.3, 3GPP TS 04.08 / 3...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.7.3 Test purpose
To verify that a CC entity of a MS in CC-state U7, "Call Received", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.7.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/1. Foreseen final state of the MS U7, call received. Maximum duration...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.8 Incoming call / U7 call received / RELEASE COMPLETE received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.8.1 Definition
The call control entity of the MS being in the state, U7, the call is cleared by a RELEASE COMPLETE message sent by the SS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service, for which immediate connect is not used.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.8.2 Conformance requirement
1) A CC entity of the MS in CC-state U7, "call received", upon receipt of a RELEASE COMPLETE message with valid cause value, shall enter CC state U0, "Null". 2) On returning to idle mode, the CC entities relating to the seven mobile terminating transaction identifiers shall be in state U0, "Null". References Conformanc...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.8.3 Test purpose
1) To verify that a CC entity of the MS in CC-state U7, "Call received", upon receipt of a RELEASE COMPLETE message with valid cause value, enters CC state U0, "Null". 2) To verify that in returning to idle mode, the CC entities relating to the seven mobile terminating transaction identifiers are in state U0, "Null".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.4.8.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U7 by using table 26.8.1.3/1. Foreseen final state of the MS U0, null. Maximum duration of test ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5 Incoming call / U8 connect request
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.1 Incoming call / U8 connect request / CONNECT acknowledged
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.1.1 Definition
The call control entity of the MS being in the state, U8, a CONNECT ACKNOWLEDGE message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.1.2 Conformance requirement
A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of CONNECT ACKNOWLEDGE shall enter the CC-state U10, "Call Active". References 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.2.2.6.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.1.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of CONNECT ACKNOWLEDGE shall enter the CC-state U10, "Call Active".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.1.4 Method of test
Specific PICS statements - Support of immediate connect (TSPC_AddInfo_ImmConn) PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/2. Foreseen final...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.2 Incoming call / U8 connect request / timer T313 time-out
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.2.1 Definition
The call control entity of the MS being in the state, U8, if no response is then received from the SS, timer T313 expires at the MS side. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.2.2 Conformance requirement
A CC entity of a MS in CC-state U8, "Connect Request", having waited for a reasonable length of time (e.g. expiry of timer T313) without receiving the appropriate protocol message to complete the incoming call, shall initiate the clearing of that incoming call by sending the CC message DISCONNECT and enter the CC-state...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.2.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", having waited for a reasonable length of time (e.g. expiry of timer T313) without receiving the appropriate protocol message to complete the incoming call, shall initiate the clearing of that incoming call by sending the CC message DISCONNECT and ent...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.2.4 Method of test
Specific PICS statements - Support of immediate connect (TSPC_AddInfo_ImmConn) PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/2. Foreseen final...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.3 Incoming call / U8 connect request / termination requested by the user
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.3.1 Definition
The call control entity of the MS being in the state, U8, the user requests for releasing of the call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.3.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", upon request by the user to terminate shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". References 3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2, 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.3
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.3.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.3.4 Method of test
Specific PICS statements - MT circuit switched basic services for which immediate connect is not used. PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.4 Incoming call / U8 connect request / DISCONNECT received with in-band information
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.4.1 Definition
The call control entity of the MS being in the state, U8, a DISCONNECT message indicating availability of in band information is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.4.2 Conformance requirement
A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT with progress indicator #8 shall enter CC-state U12, if the traffic channel is in speech mode. If the TCH is not in speech mode, the MS shall send a RELEASE message and enter CC-state U19. References 3GPP TS 04.08 / 3GPP TS 24.008 subcl...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.4.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT with progress indicator #8 enters CC-state U12, if the traffic channel is in speech mode, and that the MS sends a RELEASE message and enters CC-state U19 if the TCH is not in speech mode.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.4.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/3. Foreseen final state of the MS U12, disconnect indication or U19 d...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.5 Incoming call / U8 connect request / DISCONNECT received without in-band information
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.5.1 Definition
The call control entity of the MS being in the state, U8, a DISCONNECT message is received by the MS. The DISCONNECT message does not contain indication of in-band information availability. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.5.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT without progress indicator, shall return a RELEASE message and enter the CC-state U19, "Release Request". References 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.4 and 5.4.4.2.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.5.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT without progress indicator, returns a RELEASE message and enters the CC-state U19, "Release Request".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.5.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/3. Foreseen final state of the MS U19, release request. Maximum durat...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.6 Incoming call / U8 connect request / RELEASE received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.6.1 Definition
The call control entity of the MS being in the state, U8, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.6.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a RELEASE shall return a RELEASE COMPLETE and enter the CC-state U0, "Null". 2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to the seven mobile terminating transaction identifiers shall be in ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.6.3 Test purpose
1) To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null". 2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile terminating transac...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.6.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/3. Foreseen final state of the MS U0, null. Maximum duration of test ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.7 Incoming call / U8 connect request / lower layer failure
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.7.1 Definition
The call control entity of the MS being in the state, U8, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.7.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", having detected a lower layer failure shall return to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null". References 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3 and 5.5.3.2.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.7.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", having detected a lower layer failure returns to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null".
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.7.4 Method of test
Specific PICS statements - Support of UTRAN Radio Access Technology (TSPC_Type_UTRAN) PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/1. Foresee...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.8 Incoming call / U8 connect request / TCH assignment
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.8.1 Definition
The call control entity of the MS being in the state, U8, an assignment procedure is performed for traffic channel. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.8.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress. References 3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.3, 3GPP TS 04.08 /...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.8.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.8.4 Method of test
Specific PICS statements - PIXIT statements - Initial conditions System Simulator: 1 cell, default parameters. Mobile Station: The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/1. Foreseen final state of the MS U8, connect request. Maximum durati...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.9 Incoming call / U8 connect request / unknown message received
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.9.1 Definition
The call control entity of the MS being in the state, U8, an unknown message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.9.2 Conformance requirement
1) A CC entity of a MS in CC-state U8, "Connect Request", having received an unknown message from its peer entity shall return a STATUS message. References 3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
26.8.1.3.5.9.3 Test purpose
To verify that a CC entity of a MS in CC-state U8, "Connect Request", having received an unknown message from its peer entity returns a STATUS message.