hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.7.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U7 by using table 26.8.1.3/1.
Foreseen final state of the MS
U7, call received.
Maximum duration... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.8 Incoming call / U7 call received / RELEASE COMPLETE received | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.8.1 Definition | The call control entity of the MS being in the state, U7, the call is cleared by a RELEASE COMPLETE message sent by the SS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service, for which immediate connect is not used. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.8.2 Conformance requirement | 1) A CC entity of the MS in CC-state U7, "call received", upon receipt of a RELEASE COMPLETE message with valid cause value, shall enter CC state U0, "Null".
2) On returning to idle mode, the CC entities relating to the seven mobile terminating transaction identifiers shall be in state U0, "Null".
References
Conformanc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.8.3 Test purpose | 1) To verify that a CC entity of the MS in CC-state U7, "Call received", upon receipt of a RELEASE COMPLETE message with valid cause value, enters CC state U0, "Null".
2) To verify that in returning to idle mode, the CC entities relating to the seven mobile terminating transaction identifiers are in state U0, "Null". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.4.8.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U7 by using table 26.8.1.3/1.
Foreseen final state of the MS
U0, null.
Maximum duration of test
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5 Incoming call / U8 connect request | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.1 Incoming call / U8 connect request / CONNECT acknowledged | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.1.1 Definition | The call control entity of the MS being in the state, U8, a CONNECT ACKNOWLEDGE message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.1.2 Conformance requirement | A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of CONNECT ACKNOWLEDGE shall enter the CC-state U10, "Call Active".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.2.2.6. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.1.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of CONNECT ACKNOWLEDGE shall enter the CC-state U10, "Call Active". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.1.4 Method of test | Specific PICS statements
- Support of immediate connect (TSPC_AddInfo_ImmConn)
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/2.
Foreseen final... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.2 Incoming call / U8 connect request / timer T313 time-out | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.2.1 Definition | The call control entity of the MS being in the state, U8, if no response is then received from the SS, timer T313 expires at the MS side. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.2.2 Conformance requirement | A CC entity of a MS in CC-state U8, "Connect Request", having waited for a reasonable length of time (e.g. expiry of timer T313) without receiving the appropriate protocol message to complete the incoming call, shall initiate the clearing of that incoming call by sending the CC message DISCONNECT and enter the CC-state... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.2.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", having waited for a reasonable length of time (e.g. expiry of timer T313) without receiving the appropriate protocol message to complete the incoming call, shall initiate the clearing of that incoming call by sending the CC message DISCONNECT and ent... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.2.4 Method of test | Specific PICS statements
- Support of immediate connect (TSPC_AddInfo_ImmConn)
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/2.
Foreseen final... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.3 Incoming call / U8 connect request / termination requested by the user | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.3.1 Definition | The call control entity of the MS being in the state, U8, the user requests for releasing of the call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.3.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", upon request by the user to terminate shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request".
References
3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2,
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.3 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.3.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.3.4 Method of test | Specific PICS statements
- MT circuit switched basic services for which immediate connect is not used.
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.4 Incoming call / U8 connect request / DISCONNECT received with in-band information | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.4.1 Definition | The call control entity of the MS being in the state, U8, a DISCONNECT message indicating availability of in band information is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.4.2 Conformance requirement | A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT with progress indicator #8 shall enter CC-state U12, if the traffic channel is in speech mode. If the TCH is not in speech mode, the MS shall send a RELEASE message and enter CC-state U19.
References
3GPP TS 04.08 / 3GPP TS 24.008 subcl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.4.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT with progress indicator #8 enters CC-state U12, if the traffic channel is in speech mode, and that the MS sends a RELEASE message and enters CC-state U19 if the TCH is not in speech mode. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.4.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN. The MS is brought into the state U8 by using table 26.8.1.3/3.
Foreseen final state of the MS
U12, disconnect indication or U19 d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.5 Incoming call / U8 connect request / DISCONNECT received without in-band information | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.5.1 Definition | The call control entity of the MS being in the state, U8, a DISCONNECT message is received by the MS. The DISCONNECT message does not contain indication of in-band information availability. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.5.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT without progress indicator, shall return a RELEASE message and enter the CC-state U19, "Release Request".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.4 and 5.4.4.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.5.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a DISCONNECT without progress indicator, returns a RELEASE message and enters the CC-state U19, "Release Request". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.5.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/3.
Foreseen final state of the MS
U19, release request.
Maximum durat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.6 Incoming call / U8 connect request / RELEASE received | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.6.1 Definition | The call control entity of the MS being in the state, U8, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.6.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a RELEASE shall return a RELEASE COMPLETE and enter the CC-state U0, "Null".
2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to the seven mobile terminating transaction identifiers shall be in ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.6.3 Test purpose | 1) To verify that a CC entity of a MS in CC-state U8, "Connect Request", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null".
2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile terminating transac... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.6.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/3.
Foreseen final state of the MS
U0, null.
Maximum duration of test
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.7 Incoming call / U8 connect request / lower layer failure | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.7.1 Definition | The call control entity of the MS being in the state, U8, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.7.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", having detected a lower layer failure shall return to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3 and 5.5.3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.7.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", having detected a lower layer failure returns to idle mode with the CC entities relating to the seven mobile terminating transaction identifiers in CC-state U0, "Null". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.7.4 Method of test | Specific PICS statements
- Support of UTRAN Radio Access Technology (TSPC_Type_UTRAN)
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/1.
Foresee... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.8 Incoming call / U8 connect request / TCH assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.8.1 Definition | The call control entity of the MS being in the state, U8, an assignment procedure is performed for traffic channel. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.8.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.3,
3GPP TS 04.08 /... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.8.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH without changing the state of the call in progress. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.8.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/1.
Foreseen final state of the MS
U8, connect request.
Maximum durati... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.9 Incoming call / U8 connect request / unknown message received | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.9.1 Definition | The call control entity of the MS being in the state, U8, an unknown message is received by the MS. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.9.2 Conformance requirement | 1) A CC entity of a MS in CC-state U8, "Connect Request", having received an unknown message from its peer entity shall return a STATUS message.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.9.3 Test purpose | To verify that a CC entity of a MS in CC-state U8, "Connect Request", having received an unknown message from its peer entity returns a STATUS message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.3.5.9.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U8 by using table 26.8.1.3/1.
Foreseen final state of the MS
U8, connect request.
Maximum durati... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4 In call functions | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1 In-call functions / DTMF information transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1.1 In-call functions / DTMF information transfer / basic procedures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1.1.1 Definition | Dual Tone Multi Frequency (DTMF) is an inband one out of four plus one out of four signalling system primarily used from terminal instruments in telecommunication networks.
The support of DTMF is only permitted when a bearer capability for speech is in use or during the speech phase of alternate speech/data and alterna... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1.1.2 Conformance requirement | 1) An MS supporting the Mobile originating DTMF protocol control procedure, having a CC entity for speech in state U10, "Active": when made to send a DTMF tone, shall send a START DTMF message on the correct DCCH.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 5.3.3.
2) An MS supporting the Mobile originating DTM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1.1.3 Test purpose | 1) To verify that an MS supporting the Mobile originating DTMF protocol control procedure, having a CC entity for speech in state U10, "Active": when made to send a DTMF tone, sends a START DTMF message on the correct DCCH.
2) To verify that an MS supporting the Mobile originating DTMF protocol control procedure, havin... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.1.1.4 Method of test | Specific PICS statements
-
PIXIT statements
- supported character set (e.g. 0‑9, #, *, A, B, C, D);
- if and how DTMF tone is indicated to the user.
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in CC-state "active".
Foreseen final state of the MS
CC-state "active".
Maximum ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2 In-call functions / user notification | User notification procedure allows the network to notify a MS of any call-related event during the "active" state of a call. It also may allow a MS to notify the remote user of any appropriate call-related event during the "active" state of a call by sending a NOTIFY message containing a notification indicator to the n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2.1 In-call functions / User notification / MS terminated | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2.1.1 Definition | This is a case for testing user notification procedure terminated by the mobile station. The test is applicable for those equipments supporting at least one circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2.1.2 Conformance requirement | 1) A CC entity of a MS in CC-state U10, "active", upon receiving of a NOTIFY message shall remain in the active state.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 5.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2.1.3 Test purpose | To verify that a CC entity of a MS in CC-state U10, "active", upon receiving of a NOTIFY message remains in the active state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.2.1.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in CC-state "active".
Foreseen final state of the MS
CC-state "active".
Maximum duration of test
10 s.
Test procedure
The MS being in the call active state, the SS will send a NOTIFY ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3 In-call functions / channel changes | The two following test cases are for testing some elementary radio resource level procedures during an active state of a call to ensure call maintenance also during physical channel changes. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.1 In-call functions / channel changes / a successful channel change in active state/ Handover and Assignment Command | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.1.1 Definition | This is a case to test a change of a physical channel during active state of a call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.1.2 Conformance requirement | 1) The MS being in the call active state after having successful completed a channel assignment or a handover command, shall remain in the call active state.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 5.3.4.3.2,
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.4.6.1 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.1.3 Test purpose | To verify that the MS being in the call active state after having successful completed a channel assignment or having completed a handover command remains in the call active state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.1.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in CC-state "active".
Foreseen final state of the MS
CC-state "active".
Maximum duration of test
10 s.
Test procedure
The SS initiates a call to the Mobile Station, using an arbitrari... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.2 In-call functions / channel changes / an unsuccessful channel change in active mode/ Handover and Assignment Command | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.2.1 Definition | This is a case to test an unsuccessful change of a physical channel during active state of a call. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.2.2 Conformance requirement | 1) The MS, when returning to the old channel after handover or Assignment failure and having established the link, shall remain in the call active state.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 5.3.4.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.2.3 Test purpose | To verify that the MS, when returning to the old channel after handover or Assignment failure and correctly establishing the link, will remain in the call active state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.3.2.4 Method of test | Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in CC-state "active".
Foreseen final state of the MS
CC-state "active".
Maximum duration of test
30 s.
Test procedure
The SS initiates a call to the Mobile Station, using an arbitrari... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4 In-call functions / MS terminated in-call modification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4.1 In-call functions / MS terminated in-call modification / modify when new mode is not supported | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4.1.1 Definition | This is to test a special case of a in-call modification procedure, in which the new mode is not supported (and consequently not one of those negotiated and agreed during the establishment phase of the call). This test is applicable for any equipment supporting at least one circuit switched basic service. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4.1.2 Conformance requirement | 1) In the case that the MS supports the network originated in-call modification procedure, the MS after having received a MODIFY message with a new mode which is not the actual one and cannot be supported by the MS shall reject it by sending a MODIFY REJECT message or a STATUS message.
2) In the case that the MS does n... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4.1.3 Test purpose | 1) To verify that an MS supporting the network originated in-call modification procedure, after having received a MODIFY message with a new mode which is not the actual one and cannot be supported by the MS, rejects it by sending a MODIFY REJECT.
2) To verify that an MS not supporting the network originated in-call mod... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.4.1.4 Method of test | Specific PICS statements
- the MS supports the network originated in-call modification procedure (p = Yes/No) (TSPC_AddInfo_InCallMod)
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in CC-state "active".
Foreseen final state of the MS
CC-state "active".
Max... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5 In-call functions / MS originated in-call modification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.1 In-call functions / MS originated in-call modification / a successful case of modifying | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.1.1 Definition | This test is to test a successful case of in-call modification, which is triggered by the calling tone identification (CNG) received by the MS. This test is applicable for any equipment supporting any dual mode bearer capability service (BS61 - Alternate Speech/Data, BS81 - Speech followed by Data, Teleservice 61 - Alt... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.1.2 Conformance requirement | 1) The procedure shall be initiated by the MS in the "active" state of the call. It shall send a MODIFY message including the new mode to be changed to; and enter the "mobile originating modify" state. The new mode given in the MODIFY message shall be one of those already negotiated and agreed during the establishment ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.1.3 Test purpose | 1) To verify that the procedure is initiated by the MS in the "active" state of the call. It sends a MODIFY message including the new mode to be changed to; and enters the "mobile originating modify" state. The new mode given in the MODIFY message is one of those already negotiated and agreed during the establishment p... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.1.4 Method of test | Specific PICS statements
-
PIXIT statements
- a way to activate a dual mode call
- a way to activate in-call modificationInitial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
CC-state "active".
Maxi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.2 In-call functions / MS originated in-call modification / modify rejected | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.2.1 Definition | This is to test a special case of a in-call modification procedure, in which the in-call modification is rejected. This test is applicable for any equipment supporting any dual mode bearer capability service (BS61 - Alternate Speech/Data, BS81 - Speech followed by Data, Teleservice 61 - Alternate Speech/Group 3 fax). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.2.2 Conformance requirement | 1) Upon receipt of the MODIFY REJECT message with the old bearer capability the MS shall: resume sending Bm-channel information according to the present call mode; resume interpreting received Bm-channel information according to the present call mode; and enter the "active" state.
References
3GPP TS 04.08 / 3GPP TS 24.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.2.3 Test purpose | To verify that upon receipt of the MODIFY REJECT message with the old bearer capability the MS resumes sending Bm-channel information according to the present call mode; resumes interpreting received Bm-channel information according to the present call mode; and enters the "active" state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.2.4 Method of test | Specific PICS statements
-
PIXIT statements
- a way to activate a dual mode call
- a way to activate in-call modification
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
CC-state "active".
Max... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.3 In-call functions / MS originated in-call modification / an abnormal case of acceptance | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.3.1 Definition | This is to test a special case of a in-call modification procedure, in which the in-call modification is accepted incorrectly. This test is applicable for any equipment supporting any dual mode bearer capability service (BS61 - Alternate Speech/Data, BS81 - Speech followed by Data, Teleservice 61 - Alternate Speech/Gro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.3.2 Conformance requirement | 1) Upon receipt of the MODIFY COMPLETE message indicating a call mode which does not correspond to the requested one the MS shall discard it and take no action.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 5.3.4.4. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.3.3 Test purpose | To verify that upon receipt of the MODIFY COMPLETE message indicating a call mode which does not correspond to the requested one the MS discards it and takes no action. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.3.4 Method of test | Specific PICS statements
-
PIXIT statements
- a way to activate a dual mode call
- a way to activate in-call modification
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
CC-state U26 "Mobile O... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.4 In-call functions / MS originated in-call modification / an abnormal case of rejection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.8.1.4.5.4.1 Definition | This is to test a special case of a in-call modification procedure, in which the in-call modification is rejected incorrectly. This test is applicable for any equipment supporting any dual mode bearer capability service (BS61 - Alternate Speech/Data, BS81 - Speech followed by Data, Teleservice 61 - Alternate Speech/Gro... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.