hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.1.1 Conformance requirement | The request of the calling subscriber to set up a voice group call may specify information to be sent as user‑to‑dispatcher information to the network; in this case the user-to-dispatcher information is included in the signalling for call setup from the mobile station to the network. It is the responsibility of the inp... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.1.2 Test purpose | 1. To verify that upon initiation of an outgoing broadcast call with User-to-Dispatcher information by the user, the MS includes a User-to-dispatcher information element in the SETUP message.
2. To verify correct establishment and clearing of the broadcast call. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.1.3 Method of test | Initial Conditions
System Simulator:
1 cell with default parameters for ASCI testing.
Mobile Station:
The MS is in MM-state "idle, updated" with a TMSI allocated.
Specific PICS statements:
-
PIXIT Statements:
- Way to activate User-to-Dispatcher Information
- Way to configure VBS.
- Way to initiate VBS calls.
Foreseen ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.2 VGCS-VBS / User-to-Dispatcher information / GCC MO call | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.2.1 Conformance requirement | The request of the calling subscriber to set up a voice group call may specify information to be sent as user-to-dispatcher information to the network; in this case the user-to-dispatcher information is included in the signalling for call setup from the mobile station to the network. It is the responsibility of the inp... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.2.2 Test purpose | 1. To verify that upon initiation of an outgoing group call with User-to-Dispatcher Information by the user, the MS includes a User-to-dispatcher information element in the SETUP message.
2. To verify that the group call can be successfully established and cleared. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.2.3 Method of test | Initial Conditions
System Simulator:
1 cell with default parameters for ASCI testing.
Mobile Station:
The MS is in MM-state "idle, updated" with a TMSI allocated.
Specific PICS statements:
-
PIXIT Statements:
- Way to activate User-to-Dispatcher Information.
- Way to configure VGCS.
- Way to initiate VGCS calls.
Forese... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.3 VGCS-VBS / User-to-Dispatcher information / Compressed user information in VBS fast call set-up | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.3.1 Conformance requirement | The request of the calling subscriber to set up a voice group call may specify information to be sent as user-to-dispatcher information to the network; in this case the user-to-dispatcher information is included in the signalling for call setup from the mobile station to the network. It is the responsibility of the inp... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.3.2 Test purpose | To verify that upon initiation of an outgoing VBS fast call with User-to-Dispatcher Information by the user, the MS includes a Compressed User-to-Dispatcher Information information element in the IMMEDIATE SETUP 2 message;
To verify that the VBS fast call can be successfully established and cleared. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.3.3 Method of test | Initial Conditions
System Simulator:
1 cell with default parameters for ASCI testing.
Mobile Station:
The MS is in MM-state "idle, updated" with a TMSI allocated.
Specific PICS statements:
-
PIXIT Statements:
- Way to activate User-to-Dispatcher Information.
- Way to configure VBS.
- Way to initiate VBS fast calls set-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.4 VGCS-VBS / User-to-Dispatcher information / Compressed User-to-Dispatcher information in VGCS fast call set-up | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.4.1 Conformance requirement | The request of the calling subscriber to set up a voice group call may specify information to be sent as user-to-dispatcher information to the network; in this case the user-to-dispatcher information is included in the signalling for call setup from the mobile station to the network. It is the responsibility of the inp... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.4.2 Test purpose | 1. To verify that upon initiation of an outgoing VGCS fast call with Compressed User-to-Dispatcher Information by the user, the MS includes a Compressed User-to-Dispatcher Information information element in the IMMEDIATE SETUP 2 message.
2. To verify that the VGCS fast call can be successfully established and cleared. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.14.11.4.3 Method of test | Initial Conditions
System Simulator:
1 cell with default parameters for ASCI testing.
Mobile Station:
The MS is in MM-state "idle, updated" with a TMSI allocated.
Specific PICS statements:
-
PIXIT Statements:
- Way to activate User-to-Dispatcher Information.
- Way to configure VGCS.
- Way to initiate VGCS fast calls se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15 SoLSA signalling | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.1 General considerations | This subclause applies only to mobile stations supporting SoLSA, as defined in 3GPP TS 02.43 and 3GPP TS 03.73.
Conformance requirements of clause 26 fully apply to any SoLSA MS.
The purpose of this subclause is to test these extra functional requirements for a SoLSA mobile station.
Additional to the abbreviations and ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.1.1 Default message content | Default contents SYSTEM INFORMATION messages and default settings
For cell A and B refer to table 26.6
The following parameters shall be coded into the system information messages. Parameters shall be coded according to 3GPP TS 04.18.
SYSTEM INFORMATION TYPE 2bis, SYSTEM INFORMATION TYPE 5bis messages are not used.
SYS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.1.2 General initial conditions for SIM card | 1. Following LSA values shall be defined in the fields of the EFSLL (GSM 11.11, subclause 10.4.1.2) and in the LSA descriptor files (GSM 11.11, subclause 10.4.1.3) on the SIM card used for testing:
LSA ID
CI
LAC
LAC + CI
PLMN code
LSA Priority
Idle mode support
LSA indication for idle mode
LSA1
54
66.001
-
HPLMN
0
On
O... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.2 SoLSA signalling / RR | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.2.1 SoLSA signalling / RR / classmark interrogation | This procedure allows the network to request the MS to supply all its classmark information to the network.
Networks may systematically use this procedure (e.g. during location updating) and, it if is incorrectly implemented in the MS, the basic connection establishment procedure may systematically fail. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.2.1.1 Conformance requirements | On receipt of a CLASSMARK ENQUIRY message, the MS sends a CLASSMARK CHANGE message to the network containing the Mobile Station Classmark 2 information element and depending upon the contents of this information element, possibly the Mobile Station Classmark 3 information element.
References
3GPP TS 04.18 subclauses 3.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.2.1.2 Test purpose | To verify that if the network requests the SoLSA MS to supply all its classmark information then this information is communicated on the DCCH to the network. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
"Idle, updated", with TMSI allocated.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is switched off (or has its power removed).
The SS then sets t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3 SoLSA signalling / MM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.1 SoLSA signalling / MM / location updating | This procedure is used to register the MS in the network. If it is not performed correctly, no call can be established. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.1.1 Location updating / accepted | To inform the network of the MSs additional SoLSA capability, the SoLSA MS has to send a CLASSMARK CHANGE as soon as possible during a normal location update procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.1.1.1 Conformance requirement | If the network accepts a location updating from the Mobile where the ES IND bit is set to 1 in the Classmark 1 and the Classmark 2 information element, the SoLSA bit is set to 1 in the classmark 2 information element and the Early Classmark Sending Control bit is set to high in SI3 Rest Octets, then the MS shall send, ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.1.1.2 Test purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during location update procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.1.1.3 Method of test | Initial conditions:
System Simulator:
Two cells, A and B, belonging to different location areas with location area identification a and b of the same PLMN.
IMSI attach/detach is allowed in both cells.
The T3212 time-out value is 1/10 hour in both cells.
Mobile Station:
The MS has a valid TMSI (=TMSI1) and CKSN (=CKSN1)... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2 SoLSA signalling / MM / MM information | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.1 General remark | 1. The network has total control of the LSA indication in active mode.
2. Whatever the System Informations are, the LSA ID transmitted in the MM Information message has higher priority.
3. The indication of the current LSA in active mode is independent from the setting of the configurations parameters "LSA indication i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.2 Definition | The SoLSA MS in active mode may inform the user whether or not the serving cell is an LSA cell. The information about a serving cell is indicated in the display of the SoLSA MS.
The change out of an LSA or into an LSA may be indicated by the SoLSA MS, e.g. using a beep. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.3 Conformance requirement | 1. It shall be possible to assign a subscriber defined identifier by the operator to each LSA (alphanumeric text up to 10 characters), which can be provided to the user in idle and active mode. As an MS manufacturer option the user may assign an icon or another form of indication to each LSA.
It shall be possible to in... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.4 Test Purpose | To verify that the SoLSA MS correctly handles the LSA information received in MM INFORMATION and performs indication accordingly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.5 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.5.1 Initial Conditions | a) The SoLSA MS is in the active state of a call (U10).
b) The serving cell is cell 1 (carrier 1).
c) Parameters: same default values defined in table 20.24.1, except for the following values:
Parameter/condition
Carrier 1
LSA ID
54, 9.000.000, 250
LAC
5
CI
5000
Matching LSA on SIM
LSA1, LSA3
Escape PLMN
No
Run the fol... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.5.2 Test Procedure | a) A MM INFORMATION message including the LSA Identity IE is sent by the SS. The LSA Identity IE contains the LSA ID = 54 (LSA stored in the SIM).
b) A MM INFORMATION message including the LSA Identity IE is sent by the SS. The LSA Identity IE contains the LSA ID = 250 (LSA not stored in the SIM).
c) A MM INFORMATION m... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.5.3 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.3.2.5.4 Test Requirements | 1) After step a) the SoLSA MS indicates a change of LSA (a subscribed LSA is entered).
2) After step b) the SoLSA MS indicates a change of LSA (a not subscribed LSA is entered).
3) After step c) the SoLSA MS indicates a change of LSA (a subscribed LSA is entered).
4) After step d) the SoLSA MS indicates a change of LSA... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.4 SoLSA signalling / CC | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.4.1 SoLSA signalling / CC / call re-establishment / call present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.4.1.1 Conformance requirement | 1) If the call is in the "active" state or "mobile originating modify" state, the indication from MM that re-establishment is possible shall cause call control to request re-establishment from the MM-connection, suspend any further message to be sent and await the completion of the re-establishment procedure.
2) After ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.4.1.2 Test purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during the re-establishment of an ongoing call. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.4.1.3 Method of test | Initial conditions
System Simulator:
The SS simulates cells A and B. The LAC of cell A is different from the LAC of cell B. The PLMN identities of cell A and B are equal.
The call re-establishment parameter concerning cell A is set to an arbitrary value.
Cell B is not barred, the RACH control parameters information ele... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5 SoLSA signalling / structured procedures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.1 SoLSA signalling / structured procedures / MS originated call / early assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.1.1 Conformance requirements | 1) An MS in MM state "idle, updated" and in RR idle mode, when made to initiate a call, if it provides a human interface, shall display the dialled number.
2) An MS in MM state "idle, updated" and in RR idle mode, when made to initiate a call for a selected teleservice that is supported by the MS, shall start to initia... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.1.2 Test purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during a mobile originating call (MOC) with early assignment procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Full rate version 1 (GSM FR) (TSPC_AddInfo_Full_rate_version_1).
- Speech supported for Half rate version 1 (GSM HR) (TSPC_Add... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.2 SoLSA signalling / structured procedures / MS originated call / late assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.2.1 Conformance requirements | 1) An MS in MM state "idle, updated" and in RR idle mode, when made to initiate a call, if it provides a human interface, shall display the dialled number.
2) An MS in MM state "idle, updated" and in RR idle mode, when made to initiate a call for a selected teleservice that is supported by the MS, shall start to initia... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.2.2 Test purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during a mobile originating call (MOC) with late assignment procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Full rate version 1 (GSM FR) (TSPC_AddInfo_Full_rate_version_1).
- Speech supported for Half rate version 1 (GSM HR) (TSPC_AddI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.3 SoLSA signalling / structured procedures / MS terminated call / early assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.3.1 Conformance requirement | 1) After the initial message the SoLSA MS shall send a CLASSMARK CHANGE message in the uplink block followed direct after Layer 2 UA message sent from the network.
2) The MS shall acknowledge the SETUP message with a CALL CONFIRMED message, if compatibility checking was successful, the MS is not busy, and the user does... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.3.2 Test Purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during a mobile terminated call (MTC) with early assignment procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Full rate version 1 (GSM FR) (TSPC_AddInfo_Full_rate_version_1).
- Speech supported for Half rate version 1 (GSM HR) (TSPC_Add... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.4 SoLSA signalling / structured procedures / MS terminated call / late assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.4.1 Conformance requirement | 1) After the initial message the SoLSA MS shall send a CLASSMARK CHANGE message in the uplink block followed direct after Layer 2 UA message sent from the network.
2) The MS shall acknowledge the SETUP message with a CALL CONFIRMED message, if compatibility checking was successful, the MS is not busy, and the user does... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.4.2 Test Purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during a mobile terminated call (MTC) with late assignment procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Full rate version 1 (GSM FR) (TSPC_AddInfo_Full_rate_version_1).
- Speech supported for Half rate version 1 (GSM HR) (TSPC_Add... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.5 SoLSA signalling / structured procedures / emergency call / idle updated | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.5.1 Conformance requirements | 1) The MS in the "idle, updated" state, as after a successful location update, after the number 112 (for GSM 900 and 1800 MS), or 911 (for GSM 710, GSM 750, T-GSM 810, GSM 850 and PCS 1 900 MS in USA and Canada), or 08 (for GSM 710, GSM 750, T-GSM 810, GSM 850 and PCS 1 900 MS in Mexico) has been entered by user, shall... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.5.2 Test purpose | To verify that the SoLSA MS supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during an Emergency Call. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Half rate version 1 (GSM HR) (TSPC_AddInfo_Half_rate_version_1)
- Speech supported for Half rate version 3 (GSM HR) (TSPC_AddI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.6 SoLSA signalling / structured procedures / emergency call / idle, no IMSI | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.6.1 Conformance requirements | 1) The MS in the "idle, updated" state, as after a successful location update, after the number 112 (for GSM 900 and 1800 MS), or 911 (for GSM710, GSM 750, T-GSM 810, GSM 850 and PCS 1 900 MS in USA and Canada), or 08 (for GSM 710, GSM 750, T-GSM 810, GSM 850 and PCS 1 900 MS in Mexico) has been entered by user, shall ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.6.2 Test purpose | To verify that the SoLSA MS in the "idle, no IMSI" state (no SIM inserted), supports "early classmark sending procedure", e.g. sending information to the network about SoLSA support during an Emergency Call. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.15.5.6.3 Method of test | Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, no IMSI" no SIM inserted.
Specific PICS statements:
- Speech supported for Half rate version 1 (GSM HR) (TSPC_AddInfo_Half_rate_version_1)
- Speech supported for Half rate version 3 (GSM HR) (TSPC_AddInfo_Half_... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.0 Default contents of layer 3 messages for AMR signalling tests | Refer to table 26.6. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.1 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.2 Inband Signalling, Uplink Codec Adaptation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.2.1 Conformance Requirement | The MS shall after reception of a Codec Mode Command apply the corresponding codec mode in the uplink direction for the next possible speech frame and no more than three speech frames later. This test is not intended to verify these conformance requirements, but to verify the correctness of the involved layer 1 and lay... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.2.2 Test Purpose | This test is concerned with the link adaptation for AMR uplink and the related inband signalling. The test shall verify that the MS in the uplink direction applies the codec mode indicated by the network transmitted Codec Mode Commands, and that the MS correctly signals the used codec as Codec Mode Indication in the up... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.2.3 Method of Test | Initial Conditions
The MS is "idle updated", with TMSI allocated.
Specific PICS statements:
- Speech supported for Half rate version 3 (HR AMR).
PIXIT statements:
-
Foreseen Final State of MS
"Idle, updated", with TMSI allocated.
Test Procedure
a) A mobile originated call is initiated, following the CHANNEL REQUEST rec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.3 Structured procedures / MS terminated call / early assignment / no initial codec mode | NOTE: This test is derived from the one described in subclause 26.12 and entitled: "Structured procedures / MS terminated call / early assignment" |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.3.1 Conformance requirement | 1) In acceptance to a SETUP message indicating speech, the MS shall indicate and include in the CALL CONFIRMED message all the speech versions that it supports.
2) Upon receipt of the ASSIGNMENT COMMAND message specifying using CHx-FR or CHx/HR the Mobile Station continues a mobile terminating call establishment with e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.3.2 Test purpose | 1) To verify that, in acceptance to a SETUP message indicating speech, the MS indicates and includes in the CALL CONFIRMED message all the speech versions that it supports.
2) To verify that upon receipt of the ASSIGNMENT COMMAND message specifying using CHx-FR or CHx/HR the Mobile Station continues a mobile terminatin... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.3.3 Method of Test | Initial Conditions
SS 1 cell, default parameters.
MS in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Half rate version 3 (HR AMR).
- Immediate connect supported for all circuit switched basic services.
PIXIT statements:
- Way to indicate alerting.
- Way to make the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.4 Structured procedures / MS originated call / late assignment / specified initial codec mode | NOTE: This test is derived from the one described in subclause 26.12 and entitled: "Structured procedures / MS terminated call / early assignment". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.4.1 Conformance requirement | 1) The MS shall indicate and include in the mobile originating SETUP for speech call all the speech versions that it supports.
2) Upon receipt of the ASSIGNMENT COMMAND message using full rate version 3 or half rate version 3, the Mobile Station starts a normal channel assignment procedure. It means that the MS initiat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.4.2 Test purpose | 1) To verify that the MS indicates and includes in the mobile originating SETUP for speech call all the speech versions that it supports.
2) To verify that subsequently after receipt of an IMMEDIATE ASSIGNMENT message allocating an SDCCH, after completion of establishment of the main signalling link, after having sent ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.4.3 Method of Test | Initial Conditions
SS 1 cell, default parameters.
MS in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
- Speech supported for Half rate version 3 (HR AMR).
PIXIT statements:
- Way to indicate mobile originated alerting.
Foreseen Final State of MS
The MS has a MO call in state U10, "active"... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.5 AMR signalling / Handover / active call / successful case | NOTE: This test is derived from 26.12.2 – EFR Signalling/Handover/active call/successful case. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.5.1 Conformance requirements | The MS shall correctly apply the handover procedure in the non-synchronised case when:
- a call is in progress; and
- handover is performed from a TCH/F with/without frequency hopping towards a TCH/F with/without frequency hopping;
- the mode of either the current or the target channel is set to full rate speech versi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.5.2 Test Purpose | To test that the MS shall correctly apply the handover procedure in the non-synchronized case when:
- a call is in progress; and
- handover is performed from a TCH/F with/without frequency hopping towards a TCH/F with/without frequency hopping; and
- the mode of either the current or the target channel is set to full r... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.6 Structured procedures / emergency call | NOTE: this test is derived from subclause 26.15.5 - Structured procedures / emergency call. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.6.1 Conformance requirement | 1) The MS in the "idle, updated" state, after a successful location update, the number 112 (for GSM 900 and DCS 1800 MS), or 911 (for GSM 710, GSM 750, T_GSM 810, GSM 850 and PCS 1 900 MS in USA and Canada), or 08 (for GSM 710, GSM 750, T_GSM 810, GSM 850 and PCS 1 900 MS in Mexico) has been entered by user, shall send... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.6.2 Test purpose | 1) To verify that an MS supporting speech in the MM state "idle, updated", when made to call the number 112 (for GSM 900 and DCS 1800 MS), or 911 (for GSM 710, GSM 750, T_GSM 810, GSM 850 and PCS 1 900 MS in USA and Canada), or 08 (for GSM 710, GSM 750, T_GSM 810, GSM 850 and PCS 1 900 MS in Mexico), sends a CHANNEL RE... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.7 AMR Signalling / Directed Retry / Mobile Originated Call | NOTE: This test is derived from the one defined in subclause 26.12.6 and entitled "EFR Signalling / Directed Retry / Mobile Originated Call". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.7.1 Conformance requirements | The MS shall correctly apply the Directed Retry procedure from SDCCH/8 (no frequency hopping) to TCH/AMR with frequency hopping in the non-synchronized case during call establishment. The call control entity of the Mobile Station in the "mobile originating call proceeding" state shall, upon receipt of a CONNECT message... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.7.2 Test purpose | To test that, when the MS is ordered to perform a non-synchronized handover after the CALL PROCEED message, it continuously sends access bursts on the main DCCH (and optionally on the SACCH) until it receives a PHYSICAL INFORMATION message from the SS. To test that the MS correctly takes the values of the Timing Advanc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.7.3 Method of test | Initial Conditions
System Simulator:
2 cells A and B with same LAI, default parameters, except:
Cell A has:
BCCH ARFCN = See the table below.
Cell Allocation = See the table below.
PLMN colour code, NCC = as defaults.
BS colour code, BCC = as defaults.
NCC_PERM = 00001010.
Cell B has:
BCCH ARFCN = See the table below.
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.8 AMR Signalling / Directed Retry / Mobile Terminated Call | NOTE: This test is derived from the one defined in subclause 26.12.7 and entitled "EFR Signalling / Directed Retry / Mobile Terminated Call". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.8.1 Conformance requirements | The MS shall correctly apply the Directed Retry procedure from SDCCH/8 with frequency hopping to TCH/AMR with frequency hopping and starting time in the non-synchronized case during call establishment. The call control entity of the Mobile Station in the "call delivered" state shall, if the MS supports immediate connec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.8.2 Test purpose | To test that when the MS is ordered to perform a non-synchronized handover after the CALL CONFIRM message, it continuously sends access bursts on the main DCCH (and optionally on the SACCH) until it receives a PHYSICAL INFORMATION message from the SS. To test that the MS correctly takes the values of the Timing Advance... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.8.3 Method of test | Initial Conditions
System Simulator:
2 cells A and B with same LAI, default parameters, except:
Cell A has:
BCCH ARFCN = See the table below.
Cell Allocation =See the table below. PLMN colour code, NCC = as defaults.
BS colour code, BCC = as defaults.
NCC_PERM = 00001010.
Cell B has:
BCCH ARFCN = See the table below.
C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.9 AMR RATSCCH Protocol | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 26.16.9.1 AMR Configuration Change (normal) |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.