hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.6.2 Conformance requirement | The MS shall be able to receive a INTER SYSTEM TO UTRAN HANDOVER COMMAND message from GSM and perform an inter-system handover.
If the MS can not establish the connection to UTRAN, it shall reactivate the old channel and transmit a HANDOVER FAILURE message on the old channel.
Reference(s)
3GPP TS 25.331 subclause 8.3.6... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.6.3 Test purpose | To test that the MS reactivates the old channel and transmits HANDOVER FAILURE message to the network on the old channel in the GSM cell when it received INTER SYSTEM TO UTRAN HANDOVER COMMAND towards a non-existing UTRAN cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.6.4 Method of test | Initial conditions
System Simulator:
2 cells - Cell 1 is GPRS, Cell 2 is UTRAN (cell selection conditions in favour of the GPRS cell).
The present document subclause 40 shall be referenced for the default parameters of cell 1, and subclause 26.6.5.1 shall be referenced for cell allocation.
3GPP TS 34.108, subclause 6.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.6.5 Test requirement | At step 8 the HANDOVER FAILURE shall be received on GSM cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7 Inter system handover to UTRAN/From GSM/Failure/Cause: Frequency not implemented | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7.1 Definition | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7.2 Conformance requirement | The MS shall be able to receive a HANDOVER TO UTRAN COMMAND message from GSM and perform an inter‑system handover, even if no prior MS measurements have been performed on the target UTRAN cell and/or frequency.
The HANDOVER TO UTRAN COMMAND message instructs the mobile station to use frequency that it is not capable of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7.3 Test purpose | To test that the MS reactivates the old channel and transmits HANDOVER FAILURE message to the network on the old channel in the GSM cell when it received HANDOVER TO UTRAN COMMAND and the handover to UTRAN failed because of frequency not implemented. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7.4 Method of test | Initial conditions
System Simulator:
2 cells - Cell 1 is GSM, Cell 2 is UTRAN. TS 51.010-1 subclause 26.6.5.1 shall be referenced for the default parameters of Cell 1.
MS:
CC State U10 in cell 1.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
The MS is in CC state U10 on cell 1.
Test Proce... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.7.5 Test requirement | At step 7 the HANDOVER FAILURE shall be received on GSM cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8 Inter system handover to UTRAN/From GSM/Failure/Cause: UTRAN configuration unknown | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8.1 Definition | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8.2 Conformance requirement | The MS shall be able to receive a HANDOVER TO UTRAN COMMAND message from GSM and perform an inter-system handover, even if no prior MS measurements have been performed on the target UTRAN cell and/or frequency. The HANDOVER TO UTRAN COMMAND message instructs the mobile station to use preconfiguration that the mobile st... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8.3 Test purpose | To test that the MS reactivates the old channel and transmits HANDOVER FAILURE message to the network on the old channel in the GSM cell when it receives HANDOVER TO UTRAN COMMAND and the handover to UTRAN failed because of UTRAN configuration unknown. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8.4 Method of test | Initial conditions
System Simulator:
2 cells - Cell 1 is GSM, Cell 2 is UTRAN. TS 51.010-1section 26.6.5.1 shall be referenced for the default parameters of cell 1.
MS:
CC State U10 in cell.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
The MS is in CC state U10 on cell 1.
Test Procedure
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.8.5 Test requirement | At step 7 the HANDOVER FAILURE shall be received on GSM cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9 Inter system handover to UTRAN/From GSM/Failure/Cause: Protocol Error | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9.1 Definition | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9.2 Conformance requirement | The MS shall be able to receive a HANDOVER TO UTRAN COMMAND message from GSM and perform an inter‑system handover, even if no prior MS measurements have been performed on the target UTRAN cell and/or frequency. The HANDOVER TO UTRAN COMMAND message, which contains a protocol error causing the variable PROTOCOL_ERROR_RE... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9.3 Test purpose | To test that the MS reactivates the old channel and transmits RR Status message to the network on the old channel in the GSM cell when it receives HANDOVER TO UTRAN COMMAND and the handover to UTRAN failed because of protocol error. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9.4 Method of test | Initial conditions
System Simulator:
2 cells - Cell 1 is GSM, Cell 2 is UTRAN. TS 51.010-1 section 26.6.5.1 shall be referenced for the default parameters of cell 1.
MS:
CC State U10 in cell 1.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
The MS is in CC state U10 on cell 1.
Test Procedu... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.9.5 Test requirement | At step 5 the RR STATUS shall be received on GSM cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10 Inter system handover to UTRAN/From GSM/Integrity Protection Activation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10.1 Definition | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10.2 Conformance requirement | The MS shall include the Security START values in INTER RAT HANDOVER INFO in the RR message UTRAN CLASSMARK CHANGE -definition and in the RRC message HANDOVER TO UTRAN COMPLETE.
If the MS succeeds to establish the connection to UTRAN after reception of an INTERSYSTEM TO UTRAN HANDOVER COMMAND, the NW may start Integrit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10.3 Test purpose | To test that MS supporting both GSM and UTRAN applies the correct CS Security START value after a successful handover from GSM to UTRAN when Integrity protection is activated by the NW. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10.4 Method of test | Initial conditions
System Simulator:
2 cells - Cell 1 is GSM, Cell 2 is UTRAN.
The present document subclause 40 shall be referenced for the default parameters of cell 1, and subclause 26.6.5.1 shall be referenced for cell allocation.
3GPP TS 34.108, subclause 6.1 shall be referenced for default parameters of Cell 2.
M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 60.10.5 Test requirement | After step 14, the ongoing call shall continue on UTRAN cell with Integrity protection using the CS Security START value indicated in the UTRAN CLASSMARK CHANGE.
61-69 Void
70 Location Services
This sub clause contains test cases for Location Services (LCS). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.1 Default conditions during LCS tests | During signalling tests in sub clause 70, default conditions from sub clause 26 shall apply, if not otherwise stated within the test descriptions, with the following exception.
SYSTEM INFORMATION TYPE 3:
as default except:
Information Element
value/remark
SI 3 rest octets
- Early Classmark Sending Control
1 (perform ea... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.1.1 Default conditions during EOTD tests | For EOTD testing the serving cell shall provide a BCCH for the duration of the test to enable the MS to make the required measurements. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.1.2 Default conditions during A-GPS signalling tests | During A-GPS signalling tests defined in sub clause 70.7 to 70.9 the SS shall generate the six satellite signals and shall provide assistance data as defined in sub TS 51.010-7 subclasses 5.1.3 to 5.1.8. The levels of the simulated satellites shall all be at -125dBm +/- 6dB. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.1.3 Default conditions during A-GNSS signalling tests | During A-GNSS signalling tests defined in sub clause 70.12 to 70.15 the SS shall generate all the MS supported GNSS satellite signals defined in TS 51.010-7 sub clause 6.1.2 and shall provide assistance data, dependent on the MS capabilities, defined in TS 51.010-7 sub clauses 6.1.3 and 6.1.4. The levels of the simulat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2 EOTD Network Induced Location Request | The test cases in this sub clause focus on Network Induced Location requests. Although normally associated with Emergency Calls, it is possible for an MS to receive a NI-LR at any time during idle or dedicated mode by a PLMN operator LCS client. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.1 LCS Network Induced Emergency Call on an SDCCH / idle, no IMSI for Mobiles supporting MS-Assisted EOTD | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.1.1 Conformance requirement | 1. With the MS in the "idle, updated" state, the user shall initiate an emergency after the number 112 (for GSM 900 and 1800 MS), or 911 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 MS in the USA), or 08 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 MS in Mexico) has been entered by the user. The MS shal... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.1.2 Test Purpose | To verify when an emergency call is initiated by an MS which does not have a SIM fitted, the network instigates the LCS positioning procedure by sending RRLP (Measure Position Request) message and the mobile responds with RRLP (Measure Position Response) containing E-OTD measurement values. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.1.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters.
Neighbor Cells: 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required timing measurements.
Mobile Station:
The MS is in MM-state "idle, no IMSI", no SIM inserted.
Specific PICS statements
-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.2 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.3 Network Induced Location Request Emergency Call on an SDCCH for MS-Assisted EOTD Mobiles | For Mobiles supporting speech, emergency call establishment will be initiated by the MS whether location updating has been successful or not and whether a SIM is inserted into the MS or not.
A Network Induced Location Request could occur at any point during emergency call setup (Ref 3GPP TS 03.71 sub clause 7.6.4.1). T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.3.1 Conformance requirements: | The following requirements apply for this test:
1. With the MS in the "idle, updated" state, the user shall initiate an emergency after the number 112 (for GSM 900 and 1800 MS), or 911 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 MS in the USA), or 08 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 MS in M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.3.3 Test Purpose | To verify when an emergency call is initiated by the MS, the network instigates the LCS positioning procedure by sending RRLP (Measure Position Request) message and the mobile responds with RRLP (Measure Position Response) containing E-OTD measurement values.
Specific PICS statements
-
PIXIT statements
- |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.3.4 Method of Test | Initial Conditions:
System Simulator:
Serving cell: Default parameters
Neighbor Cells: 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required timing measurements.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Test Procedure:
A... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.4 Emergency Call NI-LR while Voice is Through Connected for Mobiles supporting MS-Assisted EOTD | A Network Induced Location Request could occur at any point during emergency call setup (Ref 3GPP TS 03.71 sub clause 7.6.4.1). In this case the voice call is established before the MS receives the location request. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.4.1 Conformance requirements: | The following requirements apply for this test:
1. With the MS in the "idle, updated" state, the user shall initiate an emergency call after the number 112 (GSM 900 and 1800 MSs), or 911 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 in the USA), or 08 (for GSM 710, GSM 750, T_GSM 810, GSM 850, PCS 1 900 in Mexic... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.4.2 Test Purpose | To verify when a network instigates the LCS positioning procedure by sending RRLP (Measure Position Request) message, after a traffic channel has been established during an emergency call, the mobile responds with RRLP (Measure Position Response) containing E-OTD measurement values.
Specific PICS statements
-
PIXIT sta... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.2.4.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters.
Neighbor Cells: 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required timing measurements.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Test Procedure:
A... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3 Mobile Originating Location Request | The test cases in this sub clause focus on Mobile Originating Location Request. A MO_LR could occur by a MS to request the network to start location procedure, which is used for either its own location, location assistance data or deciphering keys for broadcast assistance data message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1 MO_LR Basic Self Location Request | Basic Self Location Request is only applicable for requesting its own location by using MS Assisted E-OTD positioning.. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.1 MO_LR Basic Self Location Request In Idle Mode (Normal Case) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.1.1 Conformance requirements: | The MS sends a DTAP LCS MO-LR invoke to the VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO-LR by sending a REGISTER message to the network containing a LCS-MOLR invoke com... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.1.2 Test Purpose | Verifies that a MS sends a correct LCS-MOLR Invoke message with the component MO_LR TYPE set to LocationEstimate and LCS_QoS value on the initiation of MOLR. On receipt of a RRLP Measure position request from SS to start the measurement, MS shall send back RRLP Measure Position Response to SS after finishing the measur... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.1.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: at least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required ti... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.2 MO_LR Basic Self Location Request In Dedicated Mode (Normal case) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.2.1 Conformance Requirement: | The MS sends a DTAP LCS MO-LR invoke to the VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO-LR by sending a REGISTER message to the network containing a LCS-MOLR invoke com... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.2.2 Test Purpose | Verifies that a MS sends a correct LCS-MOLR Invoke message on already established speech call related SACCH with the component MO_LR TYPE sets to LocationEstimate and LCS_QoS value on the initiation of MO_LR. On receipt of a RRLP Measure position request from SS to start the measurement, MS shall send back RRLP Measure... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.1.2.3 Method of Test | Initial Conditions:
System Simulator:
Serving Cell: Default parameters.
Neighbor Cells: 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow
the MS to perform the required timing measurements.
Mobile Station:
The MS has valid TMSI and CKSN.
The MS is brought into the state U10 by using tab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.2 MO_LR Transfer to 3rd Party | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.2.1 Conformance requirements: | The MS sends a DTAP LCS MO-LR invoke to the VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time). If the MS is requesting that its location be sent to another LCS client, the message shall include t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.2.2 Test Purpose | Verifies that a MS sends a correct LCS-MOLR Invoke message with the component MO_LR TYPE set to LocationEstimate, LCS_QoS value, LCS-ClientExternalID and MLC_Number (if available) on the initiation of MOLR. On receipt of a RRLP Measure position request from SS to start the measurement, MS shall send back RRLP Measure P... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.2.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: at least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.3 MO_LR Autonomous Location | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.3.1 Conformance Requirement | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting location assistance data, the message specifies the type of assistance data and the positioning method for which the assistance data applies.
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component with M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.3.2 Test Purpose | Verifies that a MS sends a correct LCS-MOLR Invoke message with the component MOLR Type set to Assistance Data, Location-Method sets to MS-Assisted EOTD, and LCS-QoS on the initiation of MO_LR. The MS shall acknowledge the reception of each assistance data component. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.3.3 Method of Test | Initial Conditions:
System Simulator:
Serving Cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
-
Test Procedur... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4 MO_LR Positioning Measurement | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.1 MO_LR Positioning Measurement / Protocol Error | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.1.1 Conformance requirement: | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.1.2 Test Purpose: | Verifies that a MS sends a correct positioning capability via control classmark sending. The MS shall send a RRLP PROTOCOL ERROR message to SS with specific error code if RRLP MEASURE POSITION REQUEST is incomplete. On receipt of second RRLP MEASURE POSITION REQUEST from SS to start the measurement, MS shall send back ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.1.3 Method of Test | Initial Conditions:
System Simulator:
Serving Cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: At least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.2 MO_LR Positioning Measurement /Location Error | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.2.1 Conformance requirement | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.2.2 Test Purpose | Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall send back RRLP MEASURE POSITION RESPONSE message with Location Error component if the MS does not support the requested method. On receipt of second RRLP MEASURE POSITION REQUEST from SS to start the measurement, the MS sh... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.2.3 Method of Test | Initial Conditions:
System Simulator:
Serving Cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: At least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.3 MO_LR Positioning Measurement / Multiple RRLP REQUEST with same Reference Number | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.3.1 Conformance requirement | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.3.2 Test Purpose: | Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall ignore the second RRLP MEASURE POSITION REQUEST if the second RRLP MEASURE POSITION REQUEST has the same REFERENCE NUMBER as in the previous one. The MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.3.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: at least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required ti... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.4 MO_LR Positioning Measurement / Multiple RRLP REQUEST with different Reference Number | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.4.1 Conformance requirement | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.4.2 Test Purpose | Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall terminate the current location measurement if the second RRLP MEASURE POSITION REQUEST is received with a different REFERENCE NUMBER. The MS shall perform the measurement according to the newly received RRLP MEASURE POSITI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.4.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: at least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.5 MO_LR Positioning Measurement / RR Management Commands | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.5.1 Conformance requirement | The MS sends a DTAP LCS MOLR invoke to VMSC. If the MS is requesting its own location or that its own location be sent to another LCS client, this message carries LCS QoS information (e.g. accuracy, response time).
The MS invokes a MO_LR by sending a REGISTER message to network containing a LCS-MOLR invoke component wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.5.2 Test Purpose | Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall terminate the current location measurement if a RR MANAGEMENT command is received during the measurement procedure. The MS shall send a RR MANAGEMENT RESPONSE message to SS when the RR MANAGEMENT procedure is complete. The... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.3.4.5.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Neighbor Cells: at least 2 neighbor cells are used with a minimum configuration of a BCCH. This is to allow the MS to perform the required ti... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4 Mobile Terminated Location Request for Mobiles supporting MS-Assisted EOTD | The test cases in this sub clause focus on Mobile Terminated Location Request. A MT-LR occurs when an external LCS client requests the position of an MS by sending the SS REGISTER message. This may be sent to request verification for a particular MT-LR or simply to notify the user about an MT-LR that has already been a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.1 MT-LR Location Notification for MS-Assisted EOTD | Location notification takes place to inform the MS user that a particular LCS client is requesting their position without seeking the user's permission. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.1.1 Conformance requirements: | The following requirements apply for this test:
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyLocationAllowed. The MS shall notify the MS user of the location request using the method defined in the manufacturers' specification.
2. The MS shall t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.1.2 Test Purpose | Verifies that when the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyLocationAllowed, the MS displays information about the LCS client correctly (as defined by the individual manufacturer) and sends a RELEASE COMPLETE message containing a LocationNotification retur... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.1.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2 MT-LR Privacy Options for Mobiles supporting MS-Assisted EOTD | Privacy options are used in conjunction with the MS subscription profile on the VLR. They give the MS user the option to grant or withhold permission for individual location requests as they occur. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.1 MT-LR Privacy Options/ Verification – Location Allowed If No Response for mobiles supporting MS-Assisted EOTD | The case occurs when the target MS subscription profile on the VLR is set to location allowed if no response is sent. This is the default option if the VMSC does not receive verification from the target MS within a predetermined time. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.1.1 Conformance requirements | The following requirements apply for this test:
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationAllowedIfNoResponse. The MS a) notifies the user of the request and b) indicates the default is location allowed if no response is rec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.1.2 Test Purpose | Verifies that when the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationAllowedIfNoResponse, the MS displays information about the LCS client correctly and indicates that the default response is location allowed if no response is sent. Gives the user... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.1.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.2 MT-LR Privacy Options/ Verification – Location Not Allowed If No Response for Mobiles supporting MS-Assisted EOTD | This case occurs when the target MS subscription profile on the VLR is set to location not allowed if no response is sent. This is the default option if the VMSC does not receive verification from the target MS within a predetermined time. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.2.1 Conformance requirements: | The following requirements apply for this test:
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationAllowedIfNoResponse. The MS a) notifies the user of the request and b) indicates that the default is location not allowed if no respon... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.2.2 Test Purpose | Verifies that when the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationNotAllowedIfNoResponse, the MS displays information about the LCS client correctly and indicates that the default response is location not allowed if no response is sent. Gives t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.4.2.2.3 Method of Test | Initial Conditions
System Simulator:
Serving cell: Default parameters, in SYSTEM INFORMATION TYPE 3 (SI3 Rest Octet) the early classmark sending control is implemented in the SS.
Mobile Station:
The MS is in MM-state "idle, updated" with valued TMSI and CKSN.
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 70.5 Void |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.