hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.1 3,84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.1.1 Initial conditions | This scenario implies the presence of 1 3,84 Mcps TDD and 1 GSM cell as given in table 8.2.2.4.1, 8.2.2.4.2, and 8.2.2.4.3. Cell 1 and cell 2 shall belong to different Location Areas.
Table 8.2.2.4.1: General test parameters for UTRAN to GSM Cell Re-selection
Parameter
Unit
Value
Comment
Initial condition
Active cell
C... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.1.2 Procedure | a) The SS activates cell 1 and 2 with T1 defined parameters and monitors cell 1 and 2 for RRC CONNECTION REQUEST and LOCATION UPDATING REQUEST messages from the UE.
b) The UE is switched on.
c) The SS waits until the UE camps on Cell 1 and sends the RRC CONNECTION REQUEST message.
d) After 45 s, the parameters are chan... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.2 1,28 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.2.1 Initial conditions | This scenario implies the presence of 1 1,28 Mcps TDD serving cell, and 1 GSM cell to be re-selected. Test parameters are given in table 8.2.2.4.1A, 8.2.2.4.2A, and 8.2.2.4.3A.
The ranking of the cells shall be made according to the cell reselection criteria specified in TS25.304. Cell 1 and cell 2 shall belong to diff... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.2.2 Procedure | a) The SS activates cell 1 and 2 with T1 defined parameters and monitors cell 1 and 2 for RRC CONNECTION REQUEST and LOCATION UPDATING REQUEST messages from the UE.
b) The UE is switched on.
c) The SS waits until the UE camps on Cell 1 and sends the RRC CONNECTION REQUEST message.
d) After 15 s, the parameters are chan... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.3 7,68 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.3.1 Initial conditions | This scenario implies the presence of 1 7,68 Mcps TDD and 1 GSM cell as given in table 8.2.2.4.1B, 8.2.2.4.2B, and 8.2.2.4.3B. Cell 1 and cell 2 shall belong to different Location Areas.
Table 8.2.2.4.1B: General test parameters for UTRAN to GSM Cell Re-selection
Parameter
Unit
Value
Comment
Initial condition
Active ce... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.4.3.2 Procedure | a) The SS activates cell 1 and 2 with T1 defined parameters and monitors cell 1 and 2 for RRC CONNECTION REQUEST and LOCATION UPDATING REQUEST messages from the UE.
b) The UE is switched on.
c) The SS waits until the UE camps on Cell 1 and sends the RRC CONNECTION REQUEST message.
d) After 45 s, the parameters are chan... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.5 Test Requirements | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.5.1 3,84 Mcps Option | 1) In step c), after the UE has responded on cell 1, it shall not respond on any other cell (cell selection).
2) In step e), the UE shall respond on cell 2 within 27.9 s.
3) In step g), the UE shall respond on cell 1.
For the test to pass, the total number of fulfilled test requirements in step 2) shall be at least 90%... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.5.2 1,28 Mcps Option | 1) In step c), after the UE has responded on cell 1, it shall not respond on any other cell (cell selection).
2) In step e), the UE shall respond on cell 2 within 9.7 s.
3) In step g), the UE shall respond on cell 1.
For the test to pass, the total number of successful tests shall be more than 90% with a confidence lev... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.4.5.3 7,68 Mcps Option | 1) In step c), after the UE has responded on cell 1, it shall not respond on any other cell (cell selection).
2) In step e), the UE shall respond on cell 2 within 27.9 s.
3) In step g), the UE shall respond on cell 1.
For the test to pass, the total number of fulfilled test requirements in step 2) shall be at least 90%... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5 Scenario 4A: inter RAT cell acquisition and re-selection | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.1 Definition and applicability | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.1.1 3,84 Mcps Option | Void
Note: Scenario 4A does not apply for 3,84 Mcps TDD, this section numbering is purely for consistency with TS 25.123, where corresponding sections are also void. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.1.2 1,28 Mcps Option | The cell re-selection delay is defined as the time from the beginning of time period T2, to the moment when the UE camps on Cell 2, and starts to send RR Channel Request message for location update to Cell 2. ,
Unlike 1,28 Mcps scenario 4 the initial GSM RX_LEV is set below monitoring threshold and GSM measurements do... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.1.3 7,68 Mcps Option | Void
Note: Scenario 4A does not apply for 7,68 Mcps TDD, this section numbering is purely for consistency with TS 25.123, where corresponding sections are also void. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.2 Minimum requirement | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.2.1 3,84 Mcps Option | Void |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.2.2 1,28 Mcps Option | The cell re-selection delay shall be less than 26 s+ TBCCH, where TBCCH is the maximum time allowed to read BCCH data from GSM cell [21].
The rate of correct cell reselections observed during repeated tests shall be at least 90%.
NOTE: The UE shall keep a running average of 4 measurements, thus gives 4* TmeasureGSM +TB... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.2.3 7,68 Mcps Option | Void |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.3 Test purpose | This test verifies the UE meets the minimum requirement for the case where the UE camps on a TDD cell and then acquires and reselects to a GSM cell |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4 Method of Test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4.1 3,84 Mcps Option | Void |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4.2 1,28 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4.2.1 Initial conditions | This scenario implies the presence of 1 1,28 Mcps TDD serving cell, and 1 GSM cell to be re-selected. Test parameters are given in table 8.2.2.5.1A, 8.2.2.5.2A, and 8.2.2.5.3A.
The ranking of the cells shall be made according to the cell reselection criteria specified in TS25.304. Cell 1 and cell 2 shall belong to diff... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4.2.2 Procedure | a) The SS activates cell 1 and 2 with T1 defined parameters and monitors cell 1 and 2 for RRC CONNECTION REQUEST and LOCATION UPDATING REQUEST messages from the UE.
b) The UE is switched on.
c) The SS waits until the UE camps on Cell 1 and sends the RRC CONNECTION REQUEST message.
d) After 45 s, the parameters are chan... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.4.3 7,68 Mcps Option | Void |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.5 Test Requirements | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.5.1 3,84 Mcps Option | void |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.5.2 1,28 Mcps Option | 1) In step c), after the UE has responded on cell 1, it shall not respond on any other cell (cell selection).
2) In step e), the UE shall respond on cell 2 within 28 s.
3) In step g), the UE shall respond on cell 1.
For the test to pass, the total number of successful tests shall be more than 90% with a confidence leve... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.5.5.3 7,68 Mcps Option | void
8.2.2.5A Scenario 4B: UTRAN to GSM Cell Re-Selection: HCS with only UTRA level changed
8.2.2.5A.1 Definition and applicability
8.2.2.5A.1.1 3,84 Mcps Option
Void
8.2.2.5A.1.2 1,28 Mcps Option
The cell re-selection delay is defined as the time from when the cell quality levels change to the moment when this change ... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6 Scenario 5:TDD/E-UTRA cell re-selection | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1 UTRA to E-UTRA TDD cell reselection: E-UTRA is of higher priority | Editor’s note: This Test case is incomplete for frequencies above 3GHz
• The Test system uncertainties applicable above 3GHz are undefined
• The Test Tolerances and Test Requirements applicable above 3GHz are undefined |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.1 Definition and application | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.1.1 3.84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.1.2 1.28Mcps Option | The cell reselection delay to higher priority is defined as the time from the beginning of time period T2, to the moment when the UE camps on cell2, and start to send preamble on the PRACH for the RRC CONNECTION REQUEST message on cell2.
This test is for case when the UE camps on a 1.28Mcps TDD cell and reselects to a ... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.1.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.2 Minimum requirement | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.2.1 3.84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.2.2 1.28Mcps Option | The cell re-selection delay to higher priority shall be less than 81 s.
The rate of correct cell reselections observed during repeated tests shall be at least 90%.
NOTE: The cell re-selection delay to higher priority cell can be expressed as: Thigher_priority_search + TevaluateE-UTRA + TSI,
Where:
Thigher_priority_sear... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.2.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.3 Test purpose | This test verifies the UE meet minimum requirement for the case where the UE camps on a TDD cell and reselects to a E-UTRA TDD cell which is of higher priority. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4 Method of test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.1 3.84Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.2 1.28Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.2.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: see table J.2 in Annex J.
This test scenario comprised of 1UTRA TDD serving cell, and 1E-UTRA TDD cell to be re-selected. Test parameters are given in table 8.2.2.6.1.4.2.1-1, 8.2.2.6.1.4.2.1-2 and 8.2.2.6.1.4.2.1-3.The test consists of th... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.2.2 Procedure | 1) The SS activates cell 1 with T1 defined parameters in tables 8.2.2.6.1.5.2-1 and, and monitors cell 1 for random access requests from the UE.
2) The UE is switched on.
3) The SS and the UE shall perform a location registration procedure on cell 1 and apply the cell 2 parameters with T1 defined in table 8.2.2.6.1.5.2... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.2.3 Message contents | All messages indicated above shall use the same content as described in the default message content in TS 36.508 [28] clause 4.4 and 4.6 with the following exceptions:
SystemInformationBlockType19: for inter-RAT UTRA TDD - EUTRAN TDD is of higher priority cell re-selection
Derivation Path: TS 36.508 [28] clause 4.4.4.1... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.4.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.5 Test requirement | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.5.1 3.84Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.5.2 1.28Mcps Option | Table 8.2.2.6.1.5.2-1: Cell specific test parameters for cell re-selection UTRA TDD to E-UTRA TDD test case (cell 1)
Parameter
Unit
Cell 1 (UTRA)
Timeslot Number
0
DwPTS
T1
T2
T3
T1
T2
T3
UTRA RF Channel Number (Note1)
Channel 1
PCCPCH_Ec/Ior
dB
-3
-3
-3
DwPCH_Ec/Ior
dB
0
0
0
OCNS_Ec/Ior
dB
-3
-3
-3
dB
11
11
11
11
11
1... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.1.5.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2 UTRA to E-UTRA TDD cell reselection: E-UTRA is of lower priority | Editor’s note: This Test case is incomplete for frequencies above 3GHz
• The Test system uncertainties applicable above 3GHz are undefined
• The Test Tolerances and Test Requirements applicable above 3GHz are undefined |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.1 Definition and application | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.1.1 3.84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.1.2 1.28Mcps Option | The cell reselection delay to low priority is defined as the time from the beginning of time period T2, to the moment when the UE camps on cell2, and start to send preamble on the PRACH for the RRC CONNECTION REQUEST message on cell2.
This test is for case when the UE camps on a 1.28Mcps TDD cell and reselects to a E-U... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.1.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.2 Minimum requirement | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.2.1 3.84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.2.2 1.28Mcps Option | The cell re-selection delay to lower priority shall be less than 21 s.
The rate of correct cell reselections observed during repeated tests shall be at least 90%.
NOTE: The cell re-selection delay to lower priority cell can be expressed as: TevaluateE-UTRA + TSI,
Where:
TevaluateE-UTRA 19.2s, See Table 4.2A in section ... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.2.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.3 Test purpose | This test verifies the UE meet minimum requirement for the case where the UE camps on a TDD cell and reselects to a E-UTRA TDD cell which is of lower priority. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4 Method of test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.1 3.84Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.2 1.28Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.2.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: see table J.2 in Annex J.
This test scenario comprised of 1 UTRA TDD serving cell ,and 1 E-UTRA TDD cell to be re-selected.Test parameters are given in table 8.2.2.6.2.4.2.1-1, 8.2.2.6.2.4.2.1-2 and 8.2.2.6.2.4.2.1-3. The test consisits o... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.2.2 Procedure | 1) The SS activates cell1 with T1 defined parameters in tables 8.2.2.6.2.5.2-1 and monitors cell1 for random access requests from the UE.
2) The UE is switched on.
3) The SS and the UE shall perform a location registration procedure on cell1 and apply the cell 2 parameters with T1 defined in table 8.2.2.6.2.5.2-2. T1 s... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.2.3 Message contents | All messages indicated above shall use the same content as described in the default message content in TS 36.508 [28] clause 4.4 and 4.6 with the following exceptions:
SystemInformationBlockType19: for inter-RAT UTRA TDD - EUTRAN TDD is of lower priority cell re-selection
Derivation Path: TS 36.508 [28] clause 4.4.4.1,... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.4.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.5 Test requirement | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.5.1 3.84Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.5.2 1.28Mcps Option | Table 8.2.2.6.2.5.2-1: Cell specific test parameters for cell re-selection UTRA TDD to E-UTRA TDD test case (cell 1)
Parameter
Unit
Cell 1 (UTRA)
Timeslot Number
0
DwPTS
T1
T2
T1
T2
UTRA RF Channel Number (Note1)
Channel 1
PCCPCH_Ec/Ior
dB
-3
-3
DwPCH_Ec/Ior
dB
0
0
OCNS_Ec/Ior
dB
-3
-3
dB
11
-3
11
-3
dBm/1.28 MHz
-80
P... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.6.2.5.3 7.68Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7 Scenario 6: Inter-band Cell Re-selection for 1.28 Mcps TDD UE | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.1 Definition and applicability | The cell re-selection delay is defined as the time from a change of cell parameters to the moment when the UE camps on a new cell, and starts to send SYNCH-UL sequence in the UpPTS for sending the RRC CONNECTION REQUEST to perform a Location Registration on the new cell.
The requirements and this test apply to all type... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.2 Minimum requirement | The cell re-selection delay shall be less than 8 s. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.3 Test purpose | This test is to verify the requirement for the cell re-selection delay in the cross frequency band case. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.4 Method of test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
Cell condition:
There are six cells. Two frequency points are in frequency band a and frequency band b respectively. (The cells are two service cells and four background cells. The service cells use different f... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.4.2 Procedure | 1) The SS activates cells 1–6 with T1 defined parameters and monitors cells 1 and 2 for RRC CONNECTION REQUEST messages from the UE.
2) The UE is switched on.
3) The SS waits until the UE camps on Cell 1 and sends the RRC CONNECTION REQUEST message.
4) After 15 seconds, the SS shall switch the power settings from T1 to... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.2.2.7.5 Test Requirements | The cell re-selection delay shall be less than 8s.
The rate of correct cell reselections observed during repeated tests shall be at least 90% with a confidence level of 95%.
In step 3, after the UE has responded on cell 1, it shall not respond on any other cell.
In step 5, the UE shall respond on cell 2 within eight se... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3 UTRAN Connected Mode Mobility | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1 TDD/TDD Handover for 3,84 Mcps Option | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1 Handover to intra-frequency cell | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.1 Definition and applicability | Handover interruption time is defined as the time between the end of the last TTI containing a transport block on the old DPCH and the time the UE starts transmission of the new uplink DPCH.
The requirements and this test apply to the UTRA TDD UE. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.2 Minimum requirement | The interruption time shall be less than 40 ms in the single carrier case when the cell is known by the UE and the SFN of the target cell does not need to be decoded. The rate of correct handovers observed during repeated tests shall be at least 90% with a confidence level of [FFS]%.
The interruption time is dependent ... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.3 Test purpose | The purpose of this test is to verify the requirement for the intra-frequency handover delay in CELL_DCH state in the single carrier case. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.4 Method of test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
The test parameters are given in table 8.3.1.1.1 and 8.3.1.1.2. In the measurement control information it is indicated to the UE that event-triggered reporting with Event 1G shall be used, and that P-CCPCH RSCP... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.4.2 Procedure | 1) The RF parameters are set up according to T1.
2) The UE is switched on.
3) A call is set up according to the test procedure specified in TS 34.108 [3] subclause 7.3.4.
[Editor's note: subclause 7.3.4 in TS 34.108 (Message sequence chart for Handover Test procedure) is not yet specified]
4) SS shall transmit a MEASUR... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.1.5 Test requirements | For the test to pass, the total number of successful tests shall be more than 90% with a confidence level of [FFS]% of the cases.
Note: If the above Test Requirement differs from the Minimum Requirement then the Test Tolerance applied for this test is non-zero. The Test Tolerance for this test is defined in clause F.2 ... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2 Handover to inter-frequency cell | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2.1 Definition and applicability | The handover interruption time is defined as the time between the end of the last TTI containing a transport block on the old DPCH and the time the UE starts transmission of the new uplink DPCH.
The requirements and this test apply to the UTRA TDD UE. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2.2 Minimum requirement | The interruption time shall be less than 40 ms in the dual carrier case when the cell is known by the UE and the SFN of the target cell needs to be decoded. The rate of correct handovers observed during repeated tests shall be at least 90% with a confidence level of [FFS]%.
The interruption time is dependent on whether... |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2.3 Test purpose | The purpose of this test is to verify the requirement for the inter-frequency handover delay in CELL_DCH state in the dual carrier case. |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2.4 Method of test | |
40bd05ebf1e9d686c3dc55dd3e817398 | 34.122 | 8.3.1.2.4.1 Initial conditions | Test environment: normal; see clauses G.2.1 and G.2.2.
Frequencies to be tested: mid range; see clause G.2.4.
The test parameters are given in table 8.3.1.2.1 and 8.3.1.2.2. In the measurement control information it is indicated to the UE that event-triggered reporting with Event 2C shall be used. The PCCPCH RSCP and S... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.