hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
32360cd75d36913561993aae2e99e456 | 102 871-2 | 3.2 Symbols | Void. |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 3.3 Abbreviations | For the purposes of the present document, the following abbreviations apply: ATS Abstract Test Suite BAA GeoBroadcast Advanced Algorithm BAH Basic Header BC BroadCast BCA GeoBroadcast CBF Algorithm BEA BEAcon BI Invalid test events for Behaviour tests BO Inopportune test events for Behaviour tests BV Valid test events ... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4 Test Configuration | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.1 Test Configuration Overview | This clause introduces the test configurations that have been used for the definition of test purposes. The test configurations cover the various scenarios of the GeoNetworking tests. The test configurations show: • green ItsNode: ItsNode is in the communication range of the IUT. • red ItsNode: ItsNode is not in the co... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.2 Configuration 1: CF01 | ItsNodeA is not in IUT's communication range ItsNodeB is in IUT's communication range is in direction of ItsNodeA is in AREA1 is in AREA2 IUT is in AREA1 Figure 1: CF01 ItsNodeA ItsNodeB IUT AREA1 AREA2 CF01 ETSI ETSI TS 102 871-2 V2.1.1 (2026-01) 10 |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.3 Configuration 2: CF02 | ItsNodeB is in IUT's communication range is close to the centre of AREA2 is in AREA1 is in AREA2 ItsNodeD is in IUT's communication range is in direction of ItsNodeB is in AREA1 is in AREA2 IUT is in AREA1 Figure 2: CF02 ItsNodeB AREA1 AREA2 ItsNodeD CF02 IUT ETSI ETSI TS 102 871-2 V2.1.1 (2026-01) 11 |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.4 Configuration 3: CF03 | ItsNodeA is not in IUT's communication range ItsNodeB is in IUT's communication range is in direction of ItsNodeA is in AREA1 is in AREA2 ItsNodeC is in IUT's communication range is not in direction of ItsNodeA IUT is in AREA1 Figure 3: CF03 ItsNodeA ItsNodeB IUT AREA1 AREA2 ItsNodeC CF03 ETSI ETSI TS 102 871-2 V2.1.1 ... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.5 Configuration 4: CF04 | ItsNodeA is not in IUT's communication range ItsNodeB is in IUT's communication range is in direction of ItsNodeA is closer to ItsNodeA than ItsNodeD is in AREA1 is in AREA2. is close to the centre of AREA2 ItsNodeC is in IUT's communication range is not in direction of ItsNodeA ItsNodeD is in IUT's communication range... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.6 Configuration 5: CF05 | ItsNodeB is in IUT's communication range is in AREA1 is close to the centre of AREA1 ItsNodeE is in IUT's communication range is in AREA1 IUT is in AREA1 is closer to ItsNodeB than ItsNodeE (Dist_R < Dist_F) Angle_FSR formed by ItsNodeE, ItsNodeB and IUT is less than Angle_TH Figure 5: CF05 ETSI ETSI TS 102 871-2 V2.1.... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.7 Configuration 6: CF06 | ItsNodeB is in IUT's communication range is in AREA1 is close to the centre of AREA1 ItsNodeF is in IUT's communication range is in AREA1 IUT is in AREA1 is closer to ItsNodeB than ItsNodeE (Dist_R < Dist_F) Angle_FSR formed by ItsNodeF, ItsNodeB and IUT is greater than Angle_TH Figure 6: CF06 ETSI ETSI TS 102 871-2 V2... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 4.8 Configuration 7: CF07 | ItsNodeB is in IUT's communication range is in AREA1 is close to the centre of AREA1 ItsNodeD is in IUT's communication range is in AREA1 is closer to ItsNodeB than IUT (Dist_R > Dist_F) Angle_FSR formed by ItsNodeD, ItsNodeB and IUT is less than Angle_TH IUT is in AREA1 Figure 7:CF07 ETSI ETSI TS 102 871-2 V2.1.1 (202... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5 Test Suite Structure (TSS) | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.1 Structure for GeoNetworking (GEONW) tests | Table 1 shows the GeoNetworking Test Suite Structure (TSS) including its subgroups defined for conformance testing. Table 1: TSS for GEONW Root Group Sub-group Category GEONW Formatting and data validity Basic Header Valid and Invalid Common Header Valid and Inopportune Beacon Valid GeoUnicast Valid GeoBroadcast Valid ... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.2 Test groups | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.2.1 Root | The root identifies the GeoNetworking protocol given in ETSI EN 302 636-4-1 [1] and ETSI TS 103 836-4-1 [5]. |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.2.2 Test group | This level contains three major areas identified as: tests of formatting and data validity, tests of protocol operation, tests of buffer capacities. |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.2.3 Test sub-group | This level identifies the sub categories of each Group. |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 5.2.4 Categories | This level contains the standard ISO conformance test categories: behaviour for valid, invalid, inopportune events and timers. ETSI ETSI TS 102 871-2 V2.1.1 (2026-01) 17 |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6 Test Purposes (TP) | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1 Introduction | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1.1 TP definition conventions | The TPs are defined by the rules shown in table 2. Table 2: TP definition rules TP Header TP ID The TP ID is a unique identifier. It shall be specified according to the TP naming conventions defined in the above clause. Test objective Short description of test purpose objective according to the requirements from the ba... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1.2 TP Identifier naming conventions | The identifier of the TP is built according to table 3. Table 3: TP naming convention Identifier: TP/<root>/<gr>/<sgr>/<x>/<nn> <root> = root GEONW <gr> = group FDV Formatting and Data Validity PON Protocol Operation CAP Buffer Capacities <sgr> =sub-group BAH Basic Header COH Common Header BEA Beacon GUC GeoUnicast GBC... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1.3 Rules for the behaviour description | The description of the TP is built according to ETSI EG 202 798 [i.1]. In the TP the following wordings are used: • "The IUT is requested to send": an upper layer requests the geonetworking layer to send a packet. • "The IUT generates": for internal events generation, i.e. Beacon packets. • "The IUT receives": for pack... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1.4 Sources of TP definitions | All TPs have been specified according to ETSI EN 302 636-4-1 [1] and ETSI TS 103 836-4-1 [5]. |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.1.5 Mnemonics for PICS reference | The present document makes use of PICS mnemonics defined in ETSI TS 102 871-1 [4], table 1. ETSI ETSI TS 102 871-2 V2.1.1 (2026-01) 19 |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2 Test purposes for GEONW | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1 Formatting and Data Validity | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.1 Basic Header | TP Id TP/GEONW/FDV/BAH/BV-01 Test objective Check defined values of default Gn parameters in the basic header Reference ETSI EN 302 636-4-1 [1], clauses 10.3.2, 9.6.2 and Annex H ETSI TS 103 836-4-1 [5], clauses 9.6.2 and 10.3.2 and Annex H Config Id CF01 PICS Selection Initial conditions with { the IUT being in the "i... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.2 Common Header | TP Id TP/GEONW/FDV/COH/BV-01 Test objective Common GeoNetworking header validity test (PL field) - Beacon Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 9.8.6 and 10.3.6 ETSI TS 103 836-4-1 [5], clauses 9.7.2 and 10.3.6 Config Id CF01 PICS Selection Initial conditions with { the IUT being in the "initial stat... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.3 Beacon | TP Id TP/GEONW/FDV/BEA/BV-01 Test objective Beacon header validity test Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.8.6 and 10.3.6 ETSI TS 103 836-4-1 [5], clause 9.7.2, 9.8.6 and 10.3.6 Config Id CF01 PICS Selection PICS_GN_BEACON_SRC Initial conditions with { the IUT being in the "initial state" } Expected be... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.4 GeoUnicast | TP Id TP/GEONW/FDV/GUC/BV-01 Test objective GUC header validity Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 9.8.2.2 and 10.3.8 ETSI TS 103 836-4-1 [5], clauses 9.7.2, 9.7.4, 9.8.2.2 and 10.3.8 Config Id CF01 PICS Selection PICS_GN_GUC_SRC Initial conditions with { the IUT being in the "initial state" and t... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.5 GeoBroadcast | TP Id TP/GEONW/FDV/GBC/BV-01 Test objective GBC header validity Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 9.8.5.2 and 10.3.11 ETSI TS 103 836-4-1 [5], clauses 9.7.2, 9.7.4, 9.8.5.2 and 10.3.11 Config Id CF01 PICS Selection PICS_GN_GBC_SRC Initial conditions with { the IUT being in the "initial state" and... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.6 GeoAnycast | TP Id TP/GEONW/FDV/GAC/BV-01 Test objective GAC header validity Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 9.8.5.2 and 10.3.12 ETSI TS 103 836-4-1 [5], clauses 9.7.2, 9.7.4, 9.8.5.2 and 10.3.12 Config Id CF01 PICS Selection PICS_GN_GAC_SRC Initial conditions with { the IUT being in the "initial state" and... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.7 Single-Hop Broadcast | TP Id TP/GEONW/FDV/SHB/BV-01 Test objective SHB header validity Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 10.3.4, 9.8.4.2 and 10.3.10 ETSI TS 103 836-4-1 [5], clauses 9.7.2, 9.7.4, 10.3.4, 9.8.4.2 and 10.3.10 Config Id CF01 PICS Selection PICS_GN_SHB_SRC Initial conditions with { the IUT being in the "in... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.1.8 Topologically Scoped Broadcast | TP Id TP/GEONW/FDV/TSB/BV-01 Test objective TSB header validity Reference ETSI EN 302 636-4-1 [1], clauses 9.7.2, 9.7.4, 9.8.3.2 and 10.3.9 ETSI TS 103 836-4-1 [5], clauses 9.7.2, 9.7.4, 9.8.3.2 and 10.3.9 Config Id CF01 PICS Selection PICS_GN_TSB_SRC Initial conditions with { the IUT being in the "initial state" and t... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2 Protocol Operation | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.1 Location table | TP Id TP/GEONW/PON/LOT/BV-01 Test objective Check insertion of new entries into location table from Beacon header Reference ETSI EN 302 636-4-1 [1], clauses 10.3.10.3, 10.3.6.2 and 10.3.8.2 ETSI TS 103 836-4-1 [5], clauses 10.3.10.3, 10.3.6.2 and 10.3.8.2 Config Id CF01 PICS Selection PICS_GN_GUC_SRC AND PICS_GN_BEACON... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.2 Local Position Vector | TP Id TP/GEONW/PON/LPV/BV-01 Test objective Check update of the Local position vector Reference ETSI EN 302 636-4-1 [1], clauses 8.2.3, 10.2.2.2, 10.3.6.1 and Annex H ETSI TS 103 836-4-1 [5], clauses 8.3.3, 10.2.2.2, 10.3.6.1 and Annex H Config Id CF01 PICS Selection PICS_GN_BEACON_SRC Initial conditions with { the IUT... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.3 Sequence Number | TP Id TP/GEONW/PON/SQN/BV-01 Test objective Check initial sequence number assignment Reference ETSI EN 302 636-4-1 [1], clauses 8.3.2 and 10.3.8.2 ETSI TS 103 836-4-1 [5], clauses 8.4.2 and 10.3.8.2 Config Id CF01 PICS Selection PICS_GN_GBC_SRC Initial conditions with { the IUT being in the "initial state" and the IUT ... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.4 Location Service | TP Id TP/GEONW/PON/LOS/BV-01 Test objective Check first LS invocation for unknown Destination nodes Reference ETSI EN 302 636-4-1 [1], clauses 10.3.8.2, 10.2.4, 6.3 and 10.3.7.1.2 ETSI TS 103 836-4-1 [5], clauses 10.3.8.2, 10.2.4, 6.3 and 10.3.7.1.2 Config Id CF01 PICS Selection PICS_GN_LS_REQ_SRC Initial conditions wi... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.5 Forwarding Packet Buffer | TP Id TP/GEONW/PON/FPB/BV-01 Test objective Check Source packet buffering into UC forwarding buffer for unreachable Unicast destinations (absence of a suitable next hop candidate) Reference ETSI EN 302 636-4-1 [1], clauses 8.5.3, 10.3.6.3, 10.3.8.2 and 10.3.8.3 ETSI TS 103 836-4-1 [5], clauses 8.6.3, 10.3.6.3, 10.3.8.2... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.6 GeoNetworking Address | TP Id TP/GEONW/PON/GNA/BV-01 Test objective Check the initial GeoNetworking address assignment by IUT with auto-address configuration Reference ETSI EN 302 636-4-1 [1], clauses 10.2.1.2 and 10.3.6.2 ETSI TS 103 836-4-1 [5], clauses 10.2.1.2 and 10.3.6.2 Config Id CF01 PICS Selection PICS_GN_ADDR_AUTO Initial conditions... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.7 Beaconing | TP Id TP/GEONW/PON/BEA/TI-01 Test objective Check that the IUT transmits Beacons at prescribed periodicity in the absence of other originated packets Reference ETSI EN 302 636-4-1 [1], clause 10.3.6.2 ETSI TS 103 836-4-1 [5], clause 10.3.6.2 Config Id CF01 PICS Selection PICS_GN_BEACON_SRC Initial conditions with { the... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.8 GeoUnicast | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.8.1 All forwading algorithms | TP Id TP/GEONW/PON/GUC/ALL/BV-03 Test objective Check that the protocol header fields (RHL, PV) are correctly updated at each forwarding step Config Id CF03 Reference ETSI EN 302 636-4-1 [1], clause 10.3.8.3 ETSI TS 103 836-4-1 [5], clause 10.3.8.3 PICS Selection PICS_GN_GUC_FWD Initial conditions with { the IUT being ... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.8.2 Greedy forwarding | TP Id TP/GEONW/PON/GUC/GRD/BV-01 Test objective Check that a GUC request over upper Gn SAP triggers the origination of a GUC packet Reference ETSI EN 302 636-4-1 [1], clause 10.3.8.2 and clause E.2 ETSI TS 103 836-4-1 [5], clause 10.3.8.2 and clause E.2 Config Id CF01 PICS Selection PICS_GN_GUC_SRC AND (PICS_GN_NON_ARE... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.8.3 Contention-based forwarding | TP Id TP/GEONW/PON/GUC/CBF/BV-01 Test objective Check that a GUC request over upper Gn SAP triggers the origination of a GUC packet Reference ETSI EN 302 636-4-1 [1], clauses 10.3.8.2, 10.3.6.3 and clause E.3 ETSI TS 103 836-4-1 [5], clauses 10.3.8.2, 10.3.6.3 and clause E.3 Config Id CF03 PICS Selection PICS_GN_GUC_SR... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.9 GeoBroadcast | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.9.1 Non-Area Forwarding | 6.2.2.9.1.1 All forwarding algorithms TP Id TP/GEONW/PON/GBC/NONAREA/ALL/BV-03 Test objective Check that the protocol header fields (RHL) are correctly updated during a GBC forwarding step Reference ETSI EN 302 636-4-1 [1], clause 10.3.11.3 ETSI TS 103 836-4-1 [5], clause 10.3.11.3 Config Id CF03 PICS Selection PICS_GN... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.9.2 Area Forwarding | 6.2.2.9.2.1 All forwarding algorithms TP Id TP/GEONW/PON/GBC/AREA/ALL/BV-01 Test objective Check that a GBC request over upper Gn SAP triggers broadcasting of a GBC packet if the IUT is within the Destination Area Reference ETSI EN 302 636-4-1 [1], clause 10.3.11.2 ETSI TS 103 836-4-1 [5], clause 10.3.11.2 Config Id CF... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.10 Topologically Scoped Broadcast | TP Id TP/GEONW/PON/TSB/BV-01 Test objective Check that a TSB request over upper Gn SAP triggers the origination of a TSB packet Reference ETSI EN 302 636-4-1 [1], clause 10.3.9.2 ETSI TS 103 836-4-1 [5], clause 10.3.9.2 Config Id CF02 PICS Selection PICS_GN_TSB_SRC Initial conditions with { the IUT being in the "initia... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.11 Single-Hop Broadcast | TP Id TP/GEONW/PON/SHB/BV-01 Test objective Check that a SHB request over upper Gn SAP triggers the origination of a SHB packet Reference ETSI EN 302 636-4-1 [1], clause 10.3.10.2 ETSI TS 103 836-4-1 [5], clause 10.3.10.2 Config Id CF02 PICS Selection PICS_GN_SHB_SRC Initial conditions with { the IUT being in the "init... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.12 GeoAnycast | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.12.1 Non-Area Forwarding | 6.2.2.12.1.1 All forwarding algorithms TP Id TP/GEONW/PON/GAC/NONAREA/ALL/BV-03 Test objective Check that the protocol header fields (RHL) are correctly updated during a GAC forwarding step Reference ETSI EN 302 636-4-1 [1], clauses 10.3.6.3 and 10.3.12.3 ETSI TS 103 836-4-1 [5], clauses 10.3.6.3 and 10.3.12.3 Config I... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.2.12.2 Area Forwarding | TP Id TP/GEONW/PON/GAC/AREA/ALL/BV-01 Test objective Check that indication GAC request over upper Gn SAP triggers broadcasting of a GAC packet if the IUT is within the Destination Area Reference ETSI EN 302 636-4-1 [1], clause 10.3.12.2 ETSI TS 103 836-4-1 [5], clause 10.3.12.2 Config Id CF02 PICS Selection PICS_GN_GAC... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.3 Buffer Capacities | |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.3.1 Location Service | TP Id TP/GEONW/CAP/LOS/BV-01 Test objective Check of LS buffer capacity according to itsGnLocationServicePacketBufferSize parameter and the overflow handling procedure Reference ETSI EN 302 636-4-1 [1], clause 8.4.3 ETSI TS 103 836-4-1 [5], clause 8.5.3 Config Id CF01 PICS Selection PICS_GN_LS_REQ_SRC Initial condition... |
32360cd75d36913561993aae2e99e456 | 102 871-2 | 6.2.3.2 Forwarding Packet Buffer | TP Id TP/GEONW/CAP/FPB/BV-01 Test objective Check of UC forwarding buffer capacity according to itsGnUcForwardingPacketBufferSize parameter and the overflow handling procedure Reference ETSI EN 302 636-4-1 [1], clause 8.5.3 ETSI TS 103 836-4-1 [5], clause 8.6.3 Config Id CF03 PICS Selection PICS_GN_GUC_FWD Initial cond... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 1 Scope | The present document provides the specification of the Services Announcement (SA) service, including its protocol functions, based on ISO/TS 16460 [1]. The definition of the interface between Service Provider and Service Announcer ITS stations (ITS-S) as well as of the communication steps following the service announce... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 2 References | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 2.1 Normative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which a... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 2.2 Informative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. ETSI ETSI TS 102 890-1 V1.1.... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 3 Definitions, symbols and abbreviations | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 3.1 Definitions | For the purposes of the present document, the following terms and definitions apply: ITS application: association of two or more complementary ITS-S applications ITS-S application: fragment of an ITS application available at an ITS-S that uses ITS-S services to connect to one or more other fragments of the same ITS app... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 3.2 Symbols | For the purposes of the present document, the following symbols apply: changeCount Component of samBody channelIndex Component of ServiceInfo pointer to ChannelInfo ChannelInfo Datatype of channelInfos list entry channelInfos Component of samBody chOptions Component of ServiceInfo contentCount Component of changeCount ... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 3.3 Abbreviations | For the purposes of the present document, the following abbreviations apply: AID Application Identifier API Application Programming Interface ASN Abstract Syntax Notation BTP Basic Transport Protocol C-ITS Cooperative ITS GN GeoNetworking ID Identifier IETF Internet Engineering Task Force IP Internet Protocol IPv6 Inte... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4 SA functional description | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4.1 SA functional architecture | The Services Announcement (SA) service is a protocol service that is distributed over the facilities layer and the management entity of the ITS-S reference architecture as defined in ETSI EN 302 665 [i.2]. The SA service provides information on available services, applying the Services Announcement protocol with the fo... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4.2 Interfaces of the SA service | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4.2.1 Interface between Application entity and Management entity | A Service Provider ITS-S application may register / update / deregister its offered ITS service at the management entity using the parameters specified in table 1. A Service User ITS-S application may register / update / deregister potential services of interest at the management entity using the parameters specified i... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4.2.2 Interface between Facilities layer and the Management entity | The SA service functions allocated in the facilities layer and management entity exchange information among each other for the purpose of the service announcement. The management entity uses the communication requirements (see clause 6.3) to select a suitable ITS-S communication protocol stack, also referred to as "ITS... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 4.2.3 Interface between Facilities layer and the Security entity | The SA service may invoke the Security entity services. NOTE: At the time of preparation of the present document no specification of the SAP between Facilities layer and the Security entity was available. 4.2.4 Interface between Facilities layer and the Networking &Transport layer The SA services deliver the SAEM as pa... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 5 SAEM format | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 5.1 General | The SA service shall transmit the SAEM with the format as specified in Annex A. The header component of the SAEM shall be of type ItsPduHeader, as defined in the ETSI TS 102 894-2 [2]: • The protocolVersion component of the header shall be set to value "1" for the present version of this Technical Specification. • The ... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 5.2 Service info component | The samBody component of sam shall always include the serviceInfos component. This serviceInfos component shall contain at least one element. Each element shall be of type ServiceInfo and contain the following information for a distinct ITS service: • component serviceID shall contain the ITS-AID of the announced ITS s... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 5.3 Channel info component | The samBody component of sam shall include the channelInfos component and / or the ExtendedChannelInfos extension (see ISO/TS 16460 [1]) if the ITS service can be consumed on a channel that is different from the channel on which the SAEM is transmitted. This channelInfos component, when present, shall contain at least ... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 5.4 IPv6 routing advertisement | The samBody component of sam shall include the routingAdvertisement component if the ITS service can be consumed using IPv6 connectivity as detailed in ISO/TS 16460 [1]. If the Service Provider ITS-S provides its service via an ITS-S Router and if the communication between Service Provider ITS-S and ITS-S Router is a r... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6 SAEM dissemination | |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6.1 Identification | The components of changeCount shall be handled according to ISO/TS 16460 [1]: • saID shall distinguish different service announcement messages presented by the same Service Announcer ITS-S. • contentCount shall identify a change of the content of the announced SA that corresponds to a certain saID. The content of trans... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6.2 SA service trigger, update, repetition and termination | The SA facilities layer entities shall trigger, update or end the transmission of SAEM according to the parameters received from the management entity via the MF interface (see clause 4.2.2). |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6.3 SA service communication requirements | An SAEM should be disseminated to reach as many ITS-S as possible, located in the Minimum Dissemination Area (MDA). The MDA is provided by the ITS application to the SA service in the dissemination parameter CSP_CommDistance and is typically defined in a way that every receiving ITS-S has received at least once the SAE... |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6.4 SA Application Identifier (AID) | The ITS-AID value of the SA service shall be as specified in ETSI TS 102 965 [7]. |
d5410db862b13c29fe0d7a2c2eb08bbd | 102 890-1 | 6.5 SA Service Specific Permissions (SSP) | The SA service shall use the SSPs as specified in IEEE 1609.3 [9], encoded using the Unaligned PER encoding scheme as specified in ISO/IEC 8825-2 [6]. ETSI ETSI TS 102 890-1 V1.1.1 (2017-05) 15 Annex A (normative): ASN.1 specification of SAEM The ASN.1 specification of the data types of the SAEM shall be as specified b... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 1 Scope | The present document provides adaptations to IEEE Std 802.15.4g-2012 [2] in order to comply with the European regulations for Short Range Devices (SRDs). |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 2 References | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which ar... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 2.1 Normative references | The following referenced documents are necessary for the application of the present document. [1] IEEE Std 802.15.4-2011: "IEEE Standard for Local and metropolitan area networks - Part 15.4: Low Rate Wireless Personal Area Networks (LR-WPANs)". [2] IEEE Std 802.15.4g-2012: "IEEE Standard for Local and metropolitan area... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 2.2 Informative references | The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] M/441: "Standardisation Mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 3 Definitions and abbreviations | |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 3.1 Definitions | For the purposes of the present document, the following terms and definitions apply: Smart metering Utility Network (SUN) device: entity implementing the specification defined in the present document |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 3.2 Abbreviations | For the purposes of the present document, the following abbreviations apply: AP Access Point BDE Binary Differential Encoding CCA Clear Channel Assessment CP Cyclic Prefix DSSS Direct Sequence Spread Spectrum ETSI ETSI TS 102 887-1 V1.1.1 (2013-07) 8 ED Energy Detect EU European Union EVM Error Vector Magnitude FCS Fra... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4 Overview | |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.1 Introduction to smart metering utility network (SUN) | SUNs are as defined in [2], clause 4.1a with the following text replacing the 2nd paragraph of that clause. The Gaussian Frequency Shift Keying (GFSK) PHY provides good transmit power efficiency due to the constant envelope of the transmit signal. The low data rate Offset Quadrature Phase Shift Keying (O-QPSK) PHY shar... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.2 General PHY requirements | GFSK PHY: Gaussian Frequency Shift Keying (GFSK) PHY operating at multiple data rates. O-QPSK PHY: Offset Quadrature Phase Shift Keying (O-QPSK) PHY operating in a low data rate mode. OFDM PHY: Orthogonal Frequency Division Multiplexing (OFDM) PHY operating at multiple data rates. ETSI ETSI TS 102 887-1 V1.1.1 (2013-07... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.3 Channel numbering | Channel numbering shall be as defined in [2], clause 8.1.2.9 with the following constraints: • The channel centre frequency ChanCentreFreq is as follows: ChanCentreFreq = ChanCentreFreq0 + N x (NumChan × ChanSpacing) Where: - N is the number of bonded channels and can take values 1 or 2 • The parameters ChanSpacing, To... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.4 Receiver sensitivity definition | The receiver sensitivity shall be as defined in [2], clause 8.1.7 with the additional constraints given in Table 4. ETSI ETSI TS 102 887-1 V1.1.1 (2013-07) 10 Table 4: Receiver sensitivity definition Term Definition of term Conditions Receiver sensitivity - − PSDU length = 7 or 18 octets for the O-QPSK PHY PPDU Type 2 ... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.5 PHY constants | The PHY constants are given in Table 5. Table 5: PHY Constants Constant Description & Max Value aMaxPHYPacketSize As defined in [2], clause 9.2 aTurnaroundTime As defined in [2], clause 9.2 |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 4.6 PHY PIB attributes | The PHY PIB is as described in [2], clause 9.3. The relevant attributes are presented in Table 6. Table 6: PHY PIB attributes Attribute Type Valid range Description phyGFSKSFD - - As defined in [2], clause 9.3 for phyMRFSKSFD This attribute is only valid for the GFSK PHY. phyGFSKPreambleRepetitions Integer 4-64 The num... |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 5 GFSK PHY specification | |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 5.1 PPDU format for GFSK | The GFSK PPDU shall be as defined in [2], clause 18.1.1 excluding the format of the Mode Switch PPDU. The PHR is as defined in clause 5.2.2. |
0bdd3ebbce728a9b370f8915edcdd6ff | 102 887-1 | 5.2 Preamble field | The preamble shall be as defined in [2], clause 18.1.1.1 for 2FSK substituting GFSK for FSK and replacing phyFSKPreambleRepetitions with phyGFSKPreambleRepetitions. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.