data stringlengths 14 24.3k |
|---|
JadeWasTaken#6479: he cant find it
DarknessFalls229#2286: battery is usually clipped in, you have to pull a little tab to be able to pull it out
JadeWasTaken#6479: it should have been an easy job but some how somewhere its gone wrong and i cant work out why
JadeWasTaken#6479: he has got the battery out
tony#0083: hey guys, can anyone help me with some hdd related issues?
Racey#8574: What's wrong with your HDD(s)
tony#0083: my 1t western digital blue hdd broke a long time ago and i replaced it
tony#0083: but now im in need of it
tony#0083: i connected it to the pc and it doesnt show up on my pc
Racey#8574: What was wrong with the WD Blue that broke
Racey#8574: In the first place
tony#0083: idk
tony#0083: when it broke i just took it out
Racey#8574: Usually Hard Drives show sign of failure before dying altogether
Racey#8574: i.e. extremely long response times, clicking, not spinning sometimes, being extremely slow, and other symptoms |
tony#0083: it was working fine but one day windows did not boot
tony#0083: thats kind of it }
tony#0083: so it doesnt show up on my pc
tony#0083: it shows up in disk mananger
Racey#8574: Use an EFI disk utility
tony#0083: but its not initialized and with the error Data Error (Cyclic Redundancy Check)
tony#0083: when i try to initialize it
tony#0083: .
Racey#8574: Hard drive is dying most likely
tony#0083: i opened it
tony#0083: the conectors were dirty
tony#0083: i cleaned them
JustinXenyx#8854: YOU OPENED IT? @tony
Racey#8574: Shit
JustinXenyx#8854: I'd really like you to elaborate a bit more on that, because if what i'm thinking actually happened you may or may not have killed a lot of data on that HDD (or rather have made it inaccessible for you) |
tony#0083: i didnt open the upper part
tony#0083: im not dumb
tony#0083: i know that if you expose it to air it fucking dies
tony#0083: i opened the board
E-3#1531: hi all
Jam#0384: bruh who dis
E-3#1531: new here its full of tech heads here so maybe i get some help 🙂
E-3#1531: I have a question my current setup is intel i5 4670 with 16GB of RAM rx 580 win7 win10 dual boot. I want to record and stream battlefield 1942 fhsw mod being played in full glory in 4k. I can record perfectly fine in 4k with amd relive but its limited to 30 frames max I would prefer it to be 60 frames but I think I'm asking too much of my system.
Besides having a high quality recording, I also want to simultaneously stream to twitch on 720 60fps.
However I cannot accomplish this by obs or amd relive I have to pick one or the other
I found OBS quite a resource hog compared to AMD relive I can stream using AMD relive perfectly fine but then I cannot record in 4k then. I can record 4K using AMD relive but if I then start up obs and attempt to stream my frame rates go down like it's nothing normally Battlefield 1942 you get 100 frames a second easily if I am recording on 4k then I'll probably get around 60 or 50 frames a second but when I start up obs I get unplayable frame rate of 15 to 30.
last but not least I also have been forced to use older AMD drivers for better compatibility with bf1942. I just have a very big passion for this old game I really like to get people to play it again.
so what are my options is there any better free software for streaming out there that is light on resources ? what can I change on my system to lighten the load on streaming
and recording simultaneously.
I am willing to fully build a new system to accomplish this purpose with time |
but my biggest fear is compatibility with Battlefield 1942 because every driver out there for every graphic card has basically no support for all DirectX 8 games having the possibility of having unforeseen glitches.
JustinXenyx#8854: Well, that is quite a mouthful
JustinXenyx#8854: Let me break this downfor a moment
JustinXenyx#8854: You want to record/steam BF1942 with the "FHSW" mod (Whatever that is) while playing it locally in 4k? Correct? @E-3
E-3#1531: @JustinXenyx I want to record the game in 4k and stream it in 720p simultaneously
JustinXenyx#8854: Alright
JustinXenyx#8854: Seeing the first sentence already made me question that
JustinXenyx#8854: Because streaming and recording can be pretty stressful on hardware, but doing both at the same time kicks your System in the nuts
JustinXenyx#8854: And to be quite frank, your processor really isn't up for that alone, adding a game into the mix just makes it even worse
E-3#1531: bf1942 is 20 years old it doesn't need a lot of system.
JustinXenyx#8854: The game isn't the issue really
JustinXenyx#8854: Streaming/Recording at the same time absolutely is
JustinXenyx#8854: Your Processor is not strong enough to do both, you'd need to upgrade that to something way better, the RX580 is absolutely fine though
E-3#1531: https://youtu.be/RAANkygksys https://www.twitch.tv/videos/531603450 here I nearly done both the cpu was not that busy see youtube video
JustinXenyx#8854: Both done via Relive or OBS and Relive combined? @E-3 |
E-3#1531: yes
E-3#1531: relive and obs
JustinXenyx#8854: Hmm, Hardware really isn't the issue then
JustinXenyx#8854: I kinda have this feeling that it's actually a thing with the game then
JustinXenyx#8854: That, because of the games age etc it has issues utilizing the hardware given to achieve a higher FPS
JustinXenyx#8854: because as far as i can tell, neither OBS or Relive are at fault here, but the games age throws a lot of variables with incompatibility in the mix
E-3#1531: I had MSI Afterburner running you can see it on the YouTube video the only thing that I saw max out sometimes was gpu but then I drop back to like 5% or 6% it was very weird so yeah it has to do with game using d3d8
JustinXenyx#8854: I think, this would be one of those rare cases where building a seperate machine with D3D8 compatibility in mind would help out a lot more than upgrading your current PC
JustinXenyx#8854: Question is how much sense that would make though, from a financial standpoint etc
E-3#1531: that's the thing about fhsw you need at least decent to modern system to run it because it's a highly upscaled textual version of 42
E-3#1531: older hardware doesn't support running the game in 4k lol
JustinXenyx#8854: lol
JustinXenyx#8854: Yeah but D3D8 compatiblity doesn't necessarily have to mean older (as in, 2002 era) hardware, we would have to find the balance between modern hardware and decent D3D8 compatibility
JustinXenyx#8854: Wait, i think i might be overanalyzing a bit
JustinXenyx#8854: This could all be just Windows being fucky with older games etc, like it has been many times in the past |
JustinXenyx#8854: I'm guessing you run Windows 10, am i correct in assuming that?
E-3#1531: win7 for bf1942 its better for it
E-3#1531: but windows 10 does work with it but just loads slower
E-3#1531: this is rec just with amd relive https://youtu.be/9kSuJgwCurc
E-3#1531: @JustinXenyx you know I would have been playing Modern games but I hated all the grinding DLC and microtransactions and the missing mods support.
So yeah the business model in modern games basically destroyed the love I had for it.
Because it just became too much a temporarily product.
Jam#0384: I play on my retro rigs more than my main one when I dont have a new game
JustinXenyx#8854: Yeah i get that, it is a shame that modern hardware has issues with backwards compatibility though otherwise many more people would enjoy older games now @E-3
Jam#0384: I enjoy my older games the expensive way
E-3#1531: it sucks that EA basically dropped all support for 42 if only the Source Code was available publicly it could be coded to use on Modern hardware.
JustinXenyx#8854: Yeah but EA sadly isn't ID Software otherwise BF1942 would probably have a good amount of source ports for modern hardware
E-3#1531: @Jam what older games do you like ? I myself like Command and Conquer Red Alert 2 cnc generals crisis age of Mythology Age of Empires 1 and 2 and 3 rise of Nations medal of honour allied Assault Battlefield 2 with fh2 stronghold series Renegade x and I can go on and on but mainly games before 2010.
hotmale420360#3948: rainbow six vegas 1 and 2 are great
Jam#0384: Erm Allied Assault and Battlefield 2 are good |
Jam#0384: DOOM 3 and Battlefront II, Just Cause 1
Jam#0384: Half Life One
Jam#0384: Oblivion
Jam#0384: Empire At War
E-3#1531: @Jam you know on fhsw we have a map based on a mission from allied Assault
the map is called nebelwerfer Hunt see https://www.youtube.com/watch?v=c0BjIVl9hwM
it's quite insane to play this map multiplayer lol.
E-3#1531: @JustinXenyx I had an intriguing Discovery I already know with just using AMD relive I'm able to record everything perfectly on 4K or in 1460 p I can also stream perfectly on relive, but whenever I start up obs even if I don't record anything at all I get for some weird reason an immediate frame drop from 100 to 66 so there are most definitely compatibility issues with Direct x 8 and obs which probably caused the whole issue to begin with.
TheFifthAce#4128: getting an i7 8700 + 16gb + 1tb rig for 250
gonna buy an h310 for like 25$, pop the 8700 in to replace my 2600 (until I get a 3700x), give the 2600 to my little brother to replace his i5 6400, pop an i3 8100 into the rig that the 8700 was in and sell the i3 rig for 200$. Basically upgrading both me and my brother for ~50$
Jam#0384: Thats a great deal for $250
CaldeiraG#0496: one question, would this pc (https://icecat.biz/p/acer/pt.ncae2.045/pcs-workstations-EL1850-6080703.html) capable of handling my current bundle (mb+ i3+ gt 740) with its 220w psu, and if it would fit
CaldeiraG#0496: my current prebuilt is a x1935, i believe it's microatx
JustinXenyx#8854: I doubt it
JustinXenyx#8854: My inner sense screams proprietary mobo size and psu size for that EL1850 |
hotmale420360#3948: Yep https://cdn.discordapp.com/attachments/545181464363401216/664225503061737493/image0.jpg
hotmale420360#3948: https://cdn.discordapp.com/attachments/545181464363401216/664225655088480256/image0.jpg
tdp2612#3835: i mean take the dvd drive out
tdp2612#3835: and you could atleast get the gpu in
tdp2612#3835: but yeah no swapping the whole setup in
hotmale420360#3948: At least the psu doesn’t have proprietary connectors
CaldeiraG#0496: fack then
CaldeiraG#0496: i need a new case oof
CaldeiraG#0496: and a new psu
CaldeiraG#0496: well i'll probably give up at this point lol
tdp2612#3835: where do you live roughly
tdp2612#3835: if youre anywhere near me you can have a slightly boring microatx case and a not great but fully working i think 400w psu for
tdp2612#3835: i dunno how much its worth
tdp2612#3835: £15 sounds too much
CaldeiraG#0496: portugal |
CaldeiraG#0496: close to lisbon
tdp2612#3835: o
tdp2612#3835: rip
CaldeiraG#0496: yeah
CaldeiraG#0496: used market is crap too
CaldeiraG#0496: messaged a guy for a r5 2600 and it's been 2 days and nothing 😦
Bogrolluser#5568: Need a graphics card for a pci e x1 port. Any recommendations
Racey#8574: Saw the edge off of the 1x port and put in a graphics card and hope to God it doesn't fall out during usage
Bogrolluser#5568: Tbh im not desperate but at the same time I'm not wanting to spend ridiculous amounts to get a shitty card
Bogrolluser#5568: So it'd defo considered
Bogrolluser#5568: It's an old Foxconn motherboard and I'm just gonna max it the fuck out rn
Bogrolluser#5568: Cause it was a family pc of mine
Racey#8574: PCI-e slots can transfer enough speed in parallel to how many connectors are in place
Racey#8574: If you saw the wall off a 1x port and put a larger card in it it'll still supply power and all
Racey#8574: But it'll just be limited to the 1x speed |
Bogrolluser#5568: As long as its a cheap card that's better than radeon HD 3000 integrated graphics
Bogrolluser#5568: Cause I'm putting a phenom ii x4 850 for the shits in it
Bogrolluser#5568: And a mighty 8gb of ram. But I'm just stumped for a gpu
Racey#8574: A GTX 750 Ti or GT 1030 would pair well with that CPU
Racey#8574: If you get an aftermarket cooler and can overclock then you can overclock a bit and be able to hold a 1050 or 1050 Ti
TheFifthAce#4128: @Bogrolluser like do you have an adapter for it or are you trying to put a gpu in an x1 slot
Bogrolluser#5568: no adapter so far @TheFifthAce . Aren't they roughly £30 or so?
JustinXenyx#8854: PCIe X1 cards are pretty overpriced and super rare in the new market
JustinXenyx#8854: Sure, you'll probably find some on eBay but they most likely will be overpriced because of the novelty
Alcyone#2233: Is it an enclosed x1 slot or is the back open?
Bogrolluser#5568: believe enclosed
Bogrolluser#5568: will look
Haris Džinović#5160: so, ive heard you can oc a 2700 to 3.7 GHz with the stock cooler, I tried it, I also OC-ed my ram from 3000MHz to 3200MHz, when I did that my PC froze and I had to restart my PC, next time I tried again 32000MHz on the ram but 3.6Ghz on the CPU and so on all the way down to 35.50 GHz at which it still froze, my clocks before that were for the RAM it was 3000MHz and the cpu was at 3.5 GHz, whats the problem in my PC that I cant OC my CPu as other 10000+ people did with a stock cooler?
JustinXenyx#8854: @Haris Džinović What voltages did you use?
Haris Džinović#5160: How do I see that exactly |
Haris Džinović#5160: I tried searching for it in the bios
Haris Džinović#5160: tho nowhere to be found
Haris Džinović#5160: @JustinXenyx
Haris Džinović#5160: (my mobo is a ab350m ds3h v2
Haris Džinović#5160: @JustinXenyx imma try to find it now
Haris Džinović#5160: when I come back pls tell me what voltage should my cpu be in for idk a 3.6 OC maybe
TheFifthAce#4128: @Haris Džinović wait so you tried all core OC on stock voltage
TheFifthAce#4128: :kok:
TheFifthAce#4128: just do 4ghz @ 1.3v
TheFifthAce#4128: ez pz
Haris Džinović#5160: Imma do 3.7 on 1.2 that enough?
Haris Džinović#5160: I dont want too much of loud sounds
Haris Džinović#5160: https://cdn.discordapp.com/attachments/545181464363401216/664464533103968268/20200108_144450.jpg
Haris Džinović#5160: Where do I go from here
JustinXenyx#8854: that board isn't really the first thing i'd want to OC with, but it probably should get the job done |
JustinXenyx#8854: advanced voltage settings, there should be basically anything voltage related
Haris Džinović#5160: I did click on the advanced voltage setts and its only on auto but doesnt let me select anything
JustinXenyx#8854: Try setting it to manual
Haris Džinović#5160: Nvm I cant use enter thats why
Haris Džinović#5160: I can use scape and minus
Haris Džinović#5160: Lol
Haris Džinović#5160: Space*
Haris Džinović#5160: https://cdn.discordapp.com/attachments/545181464363401216/664465076924710942/20200108_144700.jpg
Haris Džinović#5160: Aight which one of the 1st two
JustinXenyx#8854: Dynamic Vcore
Haris Džinović#5160: Aighty
JustinXenyx#8854: Vcore SOC is only important for APU stuffs
Haris Džinović#5160: So 3.7 at 1.2?
JustinXenyx#8854: yeah try that
Haris Džinović#5160: Aight |
Haris Džinović#5160: Ill do a benchmark that froze my pc before and we will see
JustinXenyx#8854: If it is instable after testing increase the voltage until it is stable in 5-10mV steps
Haris Džinović#5160: https://cdn.discordapp.com/attachments/545181464363401216/664465619856392223/20200108_144909.jpg
Haris Džinović#5160: Wait im confused
Haris Džinović#5160: Is this right or
Haris Džinović#5160: The "+0.120"
JustinXenyx#8854: oh right, gigabyte BIOS
JustinXenyx#8854: You can't set precise voltage, only add to like the standard voltage??
Haris Džinović#5160: Yeo
Haris Džinović#5160: Yep*
JustinXenyx#8854: @TheFifthAce By chance, do you know the standard voltage for those gigabyte boards?
Haris Džinović#5160: Found this tho
Haris Džinović#5160: https://cdn.discordapp.com/attachments/545181464363401216/664466181515771914/20200108_145111.jpg
Haris Džinović#5160: Says vcore at 1V
TheFifthAce#4128: @JustinXenyx stock voltage for ryzen is 1.0 to 1.1v |
JustinXenyx#8854: 1.1V, which means adding 120mv to VCore should result in roughly 1.2V adjusting for VDroop
TheFifthAce#4128: 1.1v is during single threaded workloads
Haris Džinović#5160: Aight
TheFifthAce#4128: 1.0 is all core workloads
JustinXenyx#8854: hmmm
JustinXenyx#8854: then i'd probably add 200mv to be save
TheFifthAce#4128: just do 4ghz @ 1.3v
TheFifthAce#4128: :uwupip:
Haris Džinović#5160: Imma put it on +0.180
Haris Džinović#5160: Im feeling like that should be it
JustinXenyx#8854: My 1600AF does like 4GHz at 1.23V lol @TheFifthAce
TheFifthAce#4128: you cant just hit enter on the cpu vcore and change the vcore?
JustinXenyx#8854: Yeah +0.180mv should do the trick
TheFifthAce#4128: why ya gotta do offset
JustinXenyx#8854: @TheFifthAce Gigabyte meme |
TheFifthAce#4128: rip
Haris Džinović#5160: Its gigabyte
JustinXenyx#8854: they only do v-core offset if i remember right
TheFifthAce#4128: my r5 2600 does 4ghz @ 1.14v
Haris Džinović#5160: Bru.gn
Haris Džinović#5160: Bruh.gb*
TheFifthAce#4128: overclocking gigabyte b450 is gamer moment
TheFifthAce#4128: kinda cringe
Haris Džinović#5160: Damn aida64, lost my premium privilage
JustinXenyx#8854: https://www.gigabyte.com/de/Motherboard/GA-AB350M-DS3H-V2-rev-11#kf @TheFifthAce Gimped B450 board with B350 chipset afaik
TheFifthAce#4128: rip
Haris Džinović#5160: F no hdd response
Haris Džinović#5160: Ah nvm 3rd time's the charm
TheFifthAce#4128: hdd
TheFifthAce#4128: :Cringe: |
Haris Džinović#5160: Stfu
Haris Džinović#5160: Xd
Haris Džinović#5160: Oh god nvm soz
Haris Džinović#5160: Jesus
Haris Džinović#5160: Forgot my boot drive is an ssd
Haris Džinović#5160: Oops
Haris Džinović#5160: Aye guys thancc very much
Haris Džinović#5160: It works
Haris Džinović#5160: Im getting well above 130 fps on gta v now
Haris Džinović#5160: Before I had 80 to 90
TheFifthAce#4128: idk why that wouldve changed anything but ok cool
TheFifthAce#4128: check cpu-z to see if the voltage is good @Haris Džinović
Haris Džinović#5160: @TheFifthAce it is, and my ram is at 3200mhz again
Alcyone#2233: only b450 that have all the oc features are MSI, Asus and the steel legend
Alcyone#2233: why you only give the 4 phase mobo SOC control asrock? |
MythologicalZ#3752: Isn't the steel legend missing llc
Alcyone#2233: it has llc iirc
MythologicalZ#3752: I think it and the Pro4 don't have it but I can't recall
Alcyone#2233: the pro4 and fatality do not
Alcyone#2233: as well as the b450m and the other lower tiers
MythologicalZ#3752: Probably confusing it with the fatality
Alcyone#2233: steel legend has weakish vrm though, would be stressing it with overclocking anything over a 6 core
Tinybox#9112: the steel legend is suffering from a shit heatsink though
Alcyone#2233: 3rd gen 8 core with PBO would probably be okay
Alcyone#2233: whack ass 4 phase with cheap mosfets as well
Alcyone#2233: spent all the monies on the RGB
JustinXenyx#8854: Steel Legend has a much better VRM controller but cucks itself by using the same FETs as the other B450 boards
Alcyone#2233: id still take one over the other asrock, but if I was shopping in the sub 100 range, prob get the msi gaming plus
JustinXenyx#8854: AKA i'd reckon a B450M Pro4 would probably do similar OCs if not better than the steel legend
Alcyone#2233: probably |
Alcyone#2233: if it had LLC, the droop is real on asrock once you start pushing big amps
Tinybox#9112: Do all MSI boards feature LLC?
Tinybox#9112: ah well considering that my PRO-VDH has it, (B350)
Tinybox#9112: Prob all B350+ I'd assume
Tinybox#9112: on am4
Alcyone#2233: they do, i think some of the low end lack granular settings though, you get off, auto, on
Alcyone#2233: i dunno about the pro-m2 but if its a msi b450 with a heatsink on the vrm it has LLC.
Alex The Grey#4033: Quick question: Can you do SLI on a B450M DS3H mobo?
JustinXenyx#8854: No
Alex The Grey#4033: Ok thanks
Alex The Grey#4033: Which one is the cheaper new mobo that can support sli?
JustinXenyx#8854: A. SLI is a dumb choice B. If we talk AM4 and SLI support, you're DEFINITELY NOT going to get something cheap
tdp2612#3835: ^
tdp2612#3835: sli is hella ded
Alex The Grey#4033: I need it for 2 Nvidia quadro |
tdp2612#3835: and best thing to do is go on pc part pciker
tdp2612#3835: https://pcpartpicker.com/products/motherboard/#l=2
tdp2612#3835: thats all your am4 boards with sli
Alex The Grey#4033: thanks :)
tdp2612#3835: sure its not the *most* accurate, but hopefully youll see that theres no point doing it on the cheap
Alex The Grey#4033: perfect
Alex The Grey#4033: thanks
boog#9487: My laptop keyboard isnt working a USB one does though
boog#9487: The track pad works as well
Racey#8574: Did you try using it in another environment other than Windows
boog#9487: It's a laptop
boog#9487: Wdym
boog#9487: I can't just take the keyboard out
boog#9487: Not easily at least
Racey#8574: No I never said in another computer |
Racey#8574: I said in an environment other than Windows
Racey#8574: Like another OS or BIOS
boog#9487: Can't access the bios and I could try Linux but I have no idea how to get into the boot menu on this laptop
boog#9487: Well maybe I could access the bios
boog#9487: But lemme put some more research into it
taptapking#6216: I'm flashing a HTC but it is currently not going anywhere
taptapking#6216: FAIL90 hboot pre-update! please flush image again immediately
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
For "hboot-preupdate" response, restart the same procedure for device LC64DB804014...
taptapking#6216: I got this error after it flashed tee1.img and tee2.img
taptapking#6216: and it stucks in a loop
taptapking#6216: is there any solution for this?
Alex The Grey#4033: Quick question on PSU: On pcp it says that the estimated wattage is 292W, is a 450W EVGA 80+ bronze good and powerful enough?
Jam#0384: Probably, 450-600W is typically enough for anything these days
Jam#0384: But more headroom is always nice, a 500W will run cooler and quieter and provide more upgrade options |
Jam#0384: Typically in terms of beefier GPUs
Bogrolluser#5568: So
Alex The Grey#4033: It's a R5 1600, 8GB DDR4 3000Mhz, RX 570 4GB XFX, M2 240GB SSD. There won't be any upgrades soon since it is a present for my GF's little brother.
Bogrolluser#5568: I put in a new cpu today, and reseated my ram. Now my computer powers on but won't display anything. Occasionally if I restart the computer it will turn off and back on again. Any ideas what has happened?
Alex The Grey#4033: The only problem is that the only affordable 500w/550w are the VS of Corsair and I don't trust the VS line so much
BigPierogi#3368: @Bogrolluser is the ram different speeds
BigPierogi#3368: Like
BigPierogi#3368: Do you have 2 ram
BigPierogi#3368: And they are different speeds?
Bogrolluser#5568: Yeah 1 stick is a different speed than thr other. I've removed it and it is seemingly doing nothing
BigPierogi#3368: For me
BigPierogi#3368: I removed my 2666 when I got my 3200
BigPierogi#3368: Because it prevented booting
BigPierogi#3368: And it fixed my issue
BigPierogi#3368: Also what cpu |
Bogrolluser#5568: Well it's the right type of ram since I used it yesterday without a hitch
Bogrolluser#5568: Got a i7 3770k
BigPierogi#3368: I'm assuming the board supports the speed of the ram?
Bogrolluser#5568: Oh yeah
Bogrolluser#5568: Max 1600
BigPierogi#3368: Did the old ram work
BigPierogi#3368: Wait nvm
Bogrolluser#5568: Currently removing ram one at a time to see if one of the sticks died
BigPierogi#3368: I'm also assuming the CPU is supported?
BigPierogi#3368: On the board
Bogrolluser#5568: Oh yeah, I've done all that research.
BigPierogi#3368: What was the old cpu
BigPierogi#3368: And does it still work
BigPierogi#3368: When you put it in
Bogrolluser#5568: It was a i5 2500 |
Bogrolluser#5568: Like my pc powers on but it just won't display anything
BigPierogi#3368: Even with the old one?
Bogrolluser#5568: Hol up, imma move my monitor to the worn table so I can legit test this without having to lump about the pc from room to room
Bogrolluser#5568: Work table**
BigPierogi#3368: I have to go to school now
BigPierogi#3368: Sorry
BigPierogi#3368: If the old CPU works then it might be a old bios
Bogrolluser#5568: Nah, I made sure to update thhr motherboard to the latest bios
Bogrolluser#5568: Gonna test old ram, if not then it's a dodgy cpu for sure
Bogrolluser#5568: Either that or a clear the cmos
TheGeekster#8508: @Bogrolluser Bruv, tried the old CPU?
Bogrolluser#5568: Bout to now
Bogrolluser#5568: Old cpu works fine @TheGeekster
TheGeekster#8508: Okay it's either a dead CPU, or your boarrd no supporty
Bogrolluser#5568: The i7 3770k is weird. On some sites it says it is. On others it doesn't even say a thing about it |
TheGeekster#8508: what mobo?
Bogrolluser#5568: Dq670w
Bogrolluser#5568: Old Intel one
Bogrolluser#5568: Sites like cpu upgrade don't have it listed
thatubuntuguy#5914: Dq67ow was never upgraded to support ivy unless you have a modified bios
thatubuntuguy#5914: U the same guy aren't u
JustinXenyx#8854: Q67 in general was never upgraded to support ivy*
Bogrolluser#5568: I mean if you type in dq67ow cpu support list it comes up on alot of websites that it is compatible. But pretty much all those websites don't mention modded bios
Bogrolluser#5568: Feel robbed ngl
Bogrolluser#5568: Ahh well not a big loss anyway. Easy to return and get money back
Year#0124: So, i jusr upgraded my ram to 6gb but t shows me 2.91gb usable, how do i fix the problem?
JustinXenyx#8854: Install Windows 64Bit lol
Year#0124: ...
Year#0124: Nope
Year#0124: I dont want to lose all my files |
JustinXenyx#8854: Thing is, Windows 32Bit cannot adress anything over 3.something gigabytes of RAM
JustinXenyx#8854: AKA You NEED to install Windows 64 Bit
thatubuntuguy#5914: Anything 32 bit can't address more than 3.xx
thatubuntuguy#5914: Just install 64 bit
thatubuntuguy#5914: Back up with clone zilla or macrium reflect
thatubuntuguy#5914: Copy files back over
boog#9487: Alright I did some more testing and my laptop keyboard doesn't work in windows or bios I could only get into bios with a USB keyboard
boog#9487: Any fixes?
boog#9487: I also reseated the keyboard cable with no luck
JustinXenyx#8854: @boog Did you spill anything into your keyboard?
boog#9487: Not that I can think of
boog#9487: Oh
boog#9487: Fuck
boog#9487: I cleaned with with windex
boog#9487: Damn I'm stupid |
boog#9487: Although I have been doing that for a while with no issues
boog#9487: But that is the most recent thing
Racey#8574: Lmao
Deleted User#0000: Guys, I found Samsung Galaxy S8 for 60€, a bit broken in the corner but everything works fine, is that a perfect bargain or not?
Deleted User#0000: https://cdn.discordapp.com/attachments/545181464363401216/665337584498638863/Screenshot_20200111-003350.png
JustinXenyx#8854: that is a pretty good price @Deleted User
JustinXenyx#8854: Just keep in mind replacing that is gonna be a pain in the ass because you're not really gonna replace the glass
JustinXenyx#8854: you're gonna replace the entire phone body with one that has a screen with new glass on it
Deleted User#0000: Not really planning on replacing it
Deleted User#0000: I just need a 2nd phone incase something happens to my current one
JustinXenyx#8854: @boog Yeah, maybe some windex went where it shouldn't have and now is messing with the keyboard?
JustinXenyx#8854: don't get me wrong, i use windex aswell to clean some of my peripherals, but i never directly spray it on them instead i spray it onto a paper towel
boog#9487: Yeah that's where I fucked up
boog#9487: This time I wasn't thinking and sprayed it on the keyboard
boog#9487: I have it fully disassembled but I can't get the keyboard out it has melted plastic rivets |
hotmale420360#3948: use a drill?
hotmale420360#3948: or a rotary tool
boog#9487: Then I can't get it back on?
boog#9487: There's no screws whatsoever
hotmale420360#3948: thats a shame
boog#9487: Yeah
boog#9487: Wait
boog#9487: I've heard that cleaning alcohol evaporates super quick could I put some in a spray bottle and spray it on
boog#9487: And pray it gets where I need it
hotmale420360#3948: i dont know how that would work out
boog#9487: Idk
【《Neera》】#6969: Anyone knows why my M.2 is not a boot option? It already has Windows installed on it, and the board is clearly detecting it https://cdn.discordapp.com/attachments/545181464363401216/665363202011430943/20200110_200438.jpg,https://cdn.discordapp.com/attachments/545181464363401216/665363203051487235/20200110_200506.jpg
【《Neera》】#6969: Alright, found the issue. Turns out the Tomahawk can't detect two boot drives at once. Whack, so I had to unplug the HDD and boot from the M.2 first, then plug the HDD
Deleted User#0000: One more deal I found, VEGA 56 for 190€ is that a normal used price?
JustinXenyx#8854: yeah that is pretty good @Deleted User |
JustinXenyx#8854: lol, that fixed the issue easy @【《Neera》】
xXSUBEXx#9544: I got this old Rig for free but a Hiss came Form the psu https://cdn.discordapp.com/attachments/545181464363401216/665604696869699594/JPEG_20200111_181447.jpg
xXSUBEXx#9544: Is it broken?
xXSUBEXx#9544: The psu is a be quiet dark power pro (i think the first one realeased)
JustinXenyx#8854: That PC is pretty old, time wise built around 08 or 09, so the PSU might be giving in
xXSUBEXx#9544: I also smelled something like hazelnut with chemical
xXSUBEXx#9544: Oof
xXSUBEXx#9544: It kinda works but the Hiss is an concerning factor
xXSUBEXx#9544: Ill take it apart and Have a look at the PSU from outside
JustinXenyx#8854: i'd really replace the PSU, it is like 11-12 years old at this point
hotmale420360#3948: yep even if its a bequiet i wouldn't trust a psu that old
Jam#0384: I would love to have that case
Jam#0384: Bet it’s AT compatible
hotmale420360#3948: tall boi
Jam#0384: Old school full tower |
hotmale420360#3948: its nice
JustinXenyx#8854: I always wanted one of those cases for a dual PC build
hotmale420360#3948: so much place for quantum bigfoots
Jam#0384: I want it just for my Win 98 or 486 rig
Jam#0384: But also like, would make an epic sleeper
Jam#0384: And much better for airflow than some retro cases
Jam#0384: I want a Lian Li PC-60, have for a long time. Dream case there. Any Lian-Li with that early 2000s silver look would be good in my books
Jam#0384: Side window would be ideal but not required
hotmale420360#3948: yee
hotmale420360#3948: is that the one lgr built in?
Jam#0384: yes but I’ve wanted it before he made the video
hotmale420360#3948: ye its really nice
Jam#0384: Just made me want it more
Jam#0384: I would like that specific one for my 2003 build tho
Jam#0384: I want a beige case for my 98 rig |
Jam#0384: Just feels more... right that way
Jam#0384: Beige or white
hotmale420360#3948: there was an antec p160 on kijiji a while ago
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665606896606117888/20200111_182356.jpg
Jam#0384: Silver for 2002-2004
hotmale420360#3948: but it was in montreal
xXSUBEXx#9544: This is the front
Jam#0384: Wow that case is actually hot
Jam#0384: I really wish I had one
xXSUBEXx#9544: Well i got it for free
hotmale420360#3948: that recessed floppy drive🥜
Jam#0384: I would pay like
Jam#0384: $45 for one locally
Jam#0384: No shippig
Jam#0384: Cases not worth shipping costs imo |
xXSUBEXx#9544: I think im gonna spare that PC and use a typical HP in the basement
Jam#0384: That case is beautiful imo
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665607336051736596/20200111_182543.jpg
xXSUBEXx#9544: Neuer Seen that design
xXSUBEXx#9544: In a PC
xXSUBEXx#9544: Ill try To Start again if it still hisses then rip
xXSUBEXx#9544: Its off and no Hiss but power
Jam#0384: Hissing on boot is common
Jam#0384: Doesnt mean the drive is bad
Jam#0384: They just do it
xXSUBEXx#9544: I dont have a HDD inatalled
Jam#0384: I mean the disc drive
xXSUBEXx#9544: I have a copy of Windows 3.1
Jam#0384: if its PSU hiss that is bad
xXSUBEXx#9544: Im not certain |
Jam#0384: That pc is not really for win3.1
xXSUBEXx#9544: Will power it on
Jam#0384: its got newer parts in it
Jam#0384: Like that probably wont work on 3.1
Jam#0384: not correctlt
JustinXenyx#8854: that PC is more built for Windows 7
xXSUBEXx#9544: No Hiss yet
JustinXenyx#8854: Not old enough for Win 3.1
Jam#0384: WinXP should work though
Jam#0384: And is easier to get for free
xXSUBEXx#9544: Its alive
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665609087182045204/JPEG_20200111_183247.jpg
xXSUBEXx#9544: It has _ because no hdd
Jam#0384: Yeah its just a slightly old PC in an old cass
Jam#0384: Case |
Jam#0384: Its much closer to a modern system than anything for Win 3.1
xXSUBEXx#9544: I think the HP in the basement has win XP
xXSUBEXx#9544: I also Have a HDD with win 10
Jam#0384: swapping the drive over will kill the OS
Jam#0384: XP is finnicky
Jam#0384: You would have to reinstall
Jam#0384: And 10 wouldnt probably work either
Jam#0384: If you just plopped the drive in
xXSUBEXx#9544: Well im getting the other pc
xXSUBEXx#9544: There was no HDD included
hotmale420360#3948: 10 is better at just adapting to a system
hotmale420360#3948: xp just breaks
xXSUBEXx#9544: Im better off breaking a win XP drive with nothing installed then a win 10
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665612652558549013/20200111_184425.jpg
xXSUBEXx#9544: This is my donor |
xXSUBEXx#9544: Also found This case https://cdn.discordapp.com/attachments/545181464363401216/665612759542792192/20200111_184141.jpg
JustinXenyx#8854: Just install a new OS to the XP drive, you'd have to do so either way
JustinXenyx#8854: Everything up-to Windows 10 essentially shit itself when you put it into a new/different system
xXSUBEXx#9544: My dad has some selfmade windows 7 CDs if he hasnt thrown them out
TheFifthAce#4128: windows 7 zzz
xXSUBEXx#9544: I think theyre gone:/
xXSUBEXx#9544: I think i have a windows 95 CD somewhere
xXSUBEXx#9544: Will it work
JustinXenyx#8854: I wouldn't bother putting a Windows from 1995 on a PC from 2008-9
xXSUBEXx#9544: Hmm
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665617869727334442/JPEG_20200111_190742.jpg
hotmale420360#3948: i have that exact case lol
hotmale420360#3948: the orange one
hotmale420360#3948: but its normal beige
xXSUBEXx#9544: Yea |
xXSUBEXx#9544: Couldnt find a windows 7 install cd
xXSUBEXx#9544: Ill try hotswapping
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665623244300222514/20200111_192855.jpg
xXSUBEXx#9544: Hdd cabel?
xXSUBEXx#9544: For this? https://cdn.discordapp.com/attachments/545181464363401216/665624829499801600/JPEG_20200111_193442.jpg
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665624887955816469/20200111_193405.jpg
xXSUBEXx#9544: This one?
xXSUBEXx#9544: Yes or no
TheGeekster#8508: yes
xXSUBEXx#9544: Ok
xXSUBEXx#9544: Removed all uneccesary cabels
xXSUBEXx#9544: And added hdd
xXSUBEXx#9544: Lets hope it works
xXSUBEXx#9544: It activated the breaket
xXSUBEXx#9544: Im giving up |
Jam#0384: Just install XP
Jam#0384: bruh
xXSUBEXx#9544: It crashed when i was plugging it in
xXSUBEXx#9544: It activated the breaker
Jam#0384: why did you plug it in when the pc was on
Jam#0384: the HDD?
xXSUBEXx#9544: I removed the uneccesary cabels then installed the hdd
xXSUBEXx#9544: Which one to sacrafice to my art project
xXSUBEXx#9544: https://cdn.discordapp.com/attachments/545181464363401216/665629792120340519/20200111_184425.jpg,https://cdn.discordapp.com/attachments/545181464363401216/665629792862863363/20200111_195244.jpg
xXSUBEXx#9544: 1 or 2
JustinXenyx#8854: 1
JustinXenyx#8854: 2 is not worth it to be sacrified
thatubuntuguy#5914: what the fuck is going on with 2
Jam#0384: 2 is way too valuable
Jam#0384: 1 is basically worthless |
Jam#0384: crap case
thatubuntuguy#5914: looks like two cases fused together in some wack operation
Jam#0384: No thats what a fulltower is fool
thatubuntuguy#5914: u what
Jam#0384: why do you think most ATX cases are called
thatubuntuguy#5914: looks longer than anything i've seen
Jam#0384: "Mid towers"
thatubuntuguy#5914: no i've seen full towers
thatubuntuguy#5914: never seen anything like that before
Jam#0384: its a little taller than avg but its a full tower
Jam#0384: Full towers were usually taller too in the 90s
thatubuntuguy#5914: fair
Jam#0384: this one is a little tall yes but its Im pretty certain just a nonstandard full tower
Jam#0384: probably for workstation
thatubuntuguy#5914: that bar in the middle threw me off |
thatubuntuguy#5914: looked like a mid tower stacked on top of another case and fused
thatubuntuguy#5914: and the two tone colouring
thatubuntuguy#5914: on the front panel
Jam#0384: thats just the PSU spot
TheGeekster#8508: would absolutely kill for a case like that, floor standing up to desk height of 5.25 bays? fuck yeah
Jam#0384: If it was higher the cables wouldnt reach
Jam#0384: I would also
Jam#0384: He doesnt seem to think it's special
Jam#0384: I would love one
TheGeekster#8508: one of those, along with a blu ray drive, would be fucking gorgeous 😩 https://cdn.discordapp.com/attachments/545181464363401216/665632427368251402/s-l1600.png
TheGeekster#8508: i have a fractal design R5 with 2 hdd docks in it and a blu ray, i wishh for more bays
Jam#0384: it would be cool to make a 98 and Dos rig in it
Jam#0384: So like
Jam#0384: a 486 and then also a win98 rig
Jam#0384: that would be idea |
Jam#0384: two in one
Jam#0384: the two oldest i even bother messing with
xXSUBEXx#9544: Well if anyone Lives near Stuttgart i can maybe Gift the case
xXSUBEXx#9544: Its on wheels btw
Jam#0384: WHEELS
Jam#0384: nut
tdp2612#3835: Bruh
xXSUBEXx#9544: It once was an asus workstation
Jam#0384: hot
xXSUBEXx#9544: If anyone is Willing to pay shipping for it i will gladly send it (with or without guts)
xXSUBEXx#9544: Im from germany btw
Jam#0384: If I was in europe i would
Jam#0384: but shipping something like that to the states would be more expensive than its worth
xXSUBEXx#9544: 54€ but it may be more
Tsukimura#0354: Guys, may I ask for tech help? |
JustinXenyx#8854: I'd rather you ask right away instead of asking if you could ask lol
TheGeekster#8508: *you'll be banned if it involves updates for windows xp*
TheGeekster#8508: (kidding, please ask it's why we're here)
Tsukimura#0354: fine ^ <^ See. I brought in a new pre-built budget office mode just to work through x-mass and the problem arises everytime one downloads graphic drivers from the manufacturer site
TheGeekster#8508: can you send us the link you purchased it from? and any specs you have?
Tsukimura#0354: I can give you more then that all the links that I provided
Tsukimura#0354: 1stly the link from my post before I downloaded the windows from microsoft:https://www.reddit.com/r/techsupport/comments/ehuxj2/the_appearance_of_code_12_error_during_drivers/
2ndly The links when I reinstalled (clean) everything and used official windows (https://answers.microsoft.com/en-us/windows/forum/all/serious-strange-behavior-with-pc-its-strange/2dc04ed8-54a6-4209-8d91-a936dc050771)
Tsukimura#0354: I'd like to upload the mini dumps as well but it doesn't let meh x.x
JustinXenyx#8854: @scelli the next time you tell someone to go to r/techsupport i'll personally fuck you up
TheGeekster#8508: Mmmkayyyy, so you're trying to install ryzen gpu drivers and getting "code 12 error" during install?
Tsukimura#0354: with a pirated windows i get code 12 with an official one the drivers install and after I restart the pc it crashes with BSOD - Kmode exception not handled or other stuff and yeah there are dots like dots appearing on the boot up screen with like blue yellow color and stuff
Tsukimura#0354: but i'm pretty much fine in the bios
TheGeekster#8508: did the computer come with windows installed at all? |
Tsukimura#0354: I bought the pc around 25th 2019 and i've been dealing with this issue up until now
Tsukimura#0354: nope
Tsukimura#0354: had to install pirated so i could download the official one
Tsukimura#0354: oh and yeah
Tsukimura#0354: I'd lose the insurance or already lost it there o/e
TheGeekster#8508: (windows 10 is effectively free, don't pirate it, just download directly from microsoft they don't seem to give a shit now)
JustinXenyx#8854: Not pirated 10, pirated 7, the 10 install is legit as far as i can tell
JustinXenyx#8854: My first piece of advice, as a "retail pc builder" myself, is to contact the manufacturer @Tsukimura
Tsukimura#0354: yeah I did that's why the drivers actually installed but then the crashes and issues appear
TheGeekster#8508: you haven't lost any warranty, if you wipe the computer it's back to how it was when purchased, it kind of sounds like a cpu/gpu issue, i'd honestly return it
Tsukimura#0354: oh yeah those crashes happen mainly when I install the graphics card
Tsukimura#0354: It's integrated though
TheFifthAce#4128: try installing older drivers?
Tsukimura#0354: https://imgur.com/a/3saKcoN
Tsukimura#0354: tried |
Tsukimura#0354: any driver older or newer has me crashing
TheGeekster#8508: judging from the specs, this computer looks like a pc put together system by someone, not a professional company? unless you bought it from a retail store?
Tsukimura#0354: yeah I kinda did bought it from retail store here in balkan o.e
Tsukimura#0354: it wasn't bought from like tech store o.e
Tsukimura#0354: though! they say that they're working with dell service
TheGeekster#8508: that's not a dell computer
TheGeekster#8508: surely it's not?
Tsukimura#0354: i'm aware o.e
Tsukimura#0354: I checked the manifacturer from the case
TheGeekster#8508: yeah honestly i'd suggest returning it, and buying one with windows preinstalled from a tech retailer
Tsukimura#0354: even the case doesn't have a legit tech service
TheGeekster#8508: before you buy a replacement, feel free to give us a shout by @ tech_helper the role, someone will happily help you sort through the various computers and bits for sale
JustinXenyx#8854: I agree with @TheGeekster, return the computer while you have the chance to
Tsukimura#0354: also!
Tsukimura#0354: about the warranty issue they told me that I can't like open the rig and see up close if some wrong or not o.e ' Is that um legit? |
Tsukimura#0354: If I were to send it to their service what should I say or do if they ask me what seems to be the problem?
TheFifthAce#4128: sounds sketch as fuck
JustinXenyx#8854: ^
Tsukimura#0354: yeah theres this sticker on the pc case
JustinXenyx#8854: This reminds me about the "warranty void if removed" thing, which has been proven to be illegal in a lot of countrys
Tsukimura#0354: yeah
Tsukimura#0354: that's the case here
JustinXenyx#8854: yeah then i'd really just return it, too much shit to bother with for buying a prebuilt computer
Tsukimura#0354: I can't open the pc see what's wrong with it already spent actual money while I could've saved up on a custom build
TheGeekster#8508: you won't be able to see physically what is wrong with it, there's a fault somewhere that's not allowing windows to install and run the graphics driver, that's often a symptomn of a faulty gpu, which as it's built into the CPU, is fucked
TheGeekster#8508: i would send it back, and then look at other places for purchasing refurbished gaming pc's, far cheaper and more reliable (as someone physically tests it) than new pc's
TheGeekster#8508: you'll have to list us what stores are available to you, and what your budget is for the pc
Tsukimura#0354: ofc,
Tsukimura#0354: @Tech Helper Therefore I'll aim for some today's budget gaming with at least running stuff on low settings while being able to work. Is that possible with the budget of around and that's upgradeable : 0 300 - 400$?
|
Buying Troubleshoot: Budget Pre Built-PC With 40% Productivity 50% gaming experience with at last 720p
Approveable Budget -> 300 - 400$?
Requests: Aim's at upgradeable budget rid that's primary used for work, but is also at least decent with low settings with gaming does that exist in my country?
Legit Stores; WinWIN, Gigatron, Technomania, Emmi, ConTrade
Links; https://www.eponuda.com/racunari-cene/1/maxcena_46344 *
Tsukimura#0354: major tech stores here are gigatron, emmi, contrade, technomaia, winwin
Deleted User#0000: @Tsukimura none of these look any good
Deleted User#0000: @Tsukimura best bet is to buy one of the APU ryzens
Deleted User#0000: then buy GPU later |
Deleted User#0000: @Tsukimura https://www.eponuda.com/racunari-cene/altos-valkyrie-iii-amd-ryzen-5-3400g-2x4gb-3200mhz-ssd-480-radeon-vega-11-racunar-cena-505192
Deleted User#0000: this one
Deleted User#0000: then buy a decent used GPU later
Deleted User#0000: 3400g had gt 1030 tier performance so it'll do... okay
Tsukimura#0354: which GPU should I aim on?
JustinXenyx#8854: Depends on how much cash you want to save up for lol
JustinXenyx#8854: also, i wouldn't buy that prebuilt for lack of documentation, no idea what PSU is in it, what mobo, what ssd
Racey#8574: Nvidia GPUs usually cost $225 or more so you might wanna go for Radeon if you wanna save a buck
Tsukimura#0354: sense I bought a PC that doesn't work for 400$ then i'd rather save or at if i'm spending that much at least spend wisely or accurately
Tsukimura#0354: https://www.emmi.rs/emmi-konfiguracije-altos-valkyrie-iii-amd-ryzen-5-3400g-2x4gb-3200mhz-ssd-480-radeon-vega-11.11.html?productId=86376&utm_source=eponuda.com&utm_medium=product_price_click&utm_campaign=Eponuda.com&code=02a3
but if I swing by the emmi store what should I ask them about this pc?
Tsukimura#0354: however when it comes to price eponuda has similar articles with this pre-build at 300$ price https://www.eponuda.com/racunari-cene/altos-gamer-x4-ii-ryzen-3-1200-8gb-ddr4-hdd-1tb-nvidia-gt1030-racunar-cena-497154
JustinXenyx#8854: nvm, the first PC has a garbage power supply
JustinXenyx#8854: i'd figure the second PC is not too much better |
Tsukimura#0354: ah, should I give out more examples or do ya guys have any better idea ;x
Racey#8574: ~~Just build custom~~
Tsukimura#0354: yeah, neva done dat x.x
Racey#8574: Imo custom built costs less even by a little
Racey#8574: It's easy to build a computer
Racey#8574: Just watch a guide they should explain all of it
Tsukimura#0354: okay then could anyone provide me the specs at least so I kinda know from what to start x.x
Racey#8574: Specs for what
Racey#8574: If you're building the PC you decide the specs lmao
Tsukimura#0354: that's pretty tought x.x I'd rather go with a safe route >~>
Tsukimura#0354: someone's build would be fine ~>>
Tsukimura#0354: that's a good start and cheap : 0
Racey#8574: Use PC Part Picker
Racey#8574: It's straightforward and tells you the prices and compatibility and all
Tsukimura#0354: for my country >~> |
Racey#8574: Then you can make your final decision
Tsukimura#0354: yeah general price x,x
Tsukimura#0354: and limited supply x.x
Tsukimura#0354: meh
Tsukimura#0354: my country sucks x.x
Tsukimura#0354: either way thanks for help
Tsukimura#0354: I'll do some research
JustinXenyx#8854: PCPartPicker isn't just for the US, if you're lucky they may have your country on there aswell
Tsukimura#0354: just a quick question should I buy CPU's with integrated graphics with a custom build? and what do PC cases have to have?
Smug space wizard#7829: Sup, anyone online?
Xbox 360 1953#2640: No https://cdn.discordapp.com/attachments/545181464363401216/665716153099878400/Screenshot_20200111-193720_Discord2.jpg
JustinXenyx#8854: nah, nobody is online, everyone is either sleeping or eating pizza
Jam#0384: Anyone have a Windows 7 key I could have? Not urgent enough to buy one but it would be really nice
CaptainFlanger#2563: I do have an HP OEM specific Windows 7 Professional key but idk if that will work or not.
Racey#8574: All keys work if they already aren't in use by another machine at the moment Windows checks |
CaptainFlanger#2563: This HP that I own ain't using Windows 7 anymore. It live happily on Linux Mint.
Racey#8574: I have an HP OEM Key for Windows 7 Professional but it's in use by my server running Windows 10 Pro
CaptainFlanger#2563: I see.
CaptainFlanger#2563: It's only one-time use, sort of?
Racey#8574: No
Racey#8574: It can be used as much as you want
Racey#8574: But
Racey#8574: If Windows checks if another on machine is using the same key at the same time then it'll immediately deactivate both computers
CaptainFlanger#2563: Ah.
CaptainFlanger#2563: That's a bit sad.
mi3night#2562: Best x570 board under $200
Jam#0384: X570 Gaming X
Jam#0384: Me and Myth love the board
Jam#0384: @CaptainFlanger is that Win7 key still up for grabs?
CaptainFlanger#2563: I have 0 use for it. |
Jam#0384: You mind DMing it to me?
CaptainFlanger#2563: Hold on...
TheFifthAce#4128: gaming x is good
TheFifthAce#4128: or the tuf
tdp2612#3835: https://cdn.discordapp.com/attachments/545181464363401216/665938887981400074/Screenshot_20200112-152254.png,https://cdn.discordapp.com/attachments/545181464363401216/665938888501624849/Screenshot_20200112-152257.png
tdp2612#3835: Yes/no?
tdp2612#3835: https://www.overclock.net/forum/161-computer-cases/272829-ugliest-pc-case-11.html
tdp2612#3835: its definitely a bit older if people were slagging it off 10 years ago
Jam#0384: Use it for a retro MSI build
Jam#0384: red S478 board, red GeForce 4/5
Jam#0384: Red ddr heatspreaders
Jam#0384: I have most of that stuff on me already tbh
Jam#0384: :Xdxdxd:
IRON MAIDEN#4184: @tdp2612 get that pc case it's cool
IRON MAIDEN#4184: @Jam u gotta find og red athlon 64 board |
tdp2612#3835: id only end up putting it in the attic tbh
tdp2612#3835: i dont have any hardware for it
IRON MAIDEN#4184: Old hardware is cheap
IRON MAIDEN#4184: Sometimes
tdp2612#3835: unless i start looking for xp era bits
IRON MAIDEN#4184: Its worth getting that case
IRON MAIDEN#4184: Either a blue or red board
Jam#0384: Its hard to find specific things sometimes Iron
Jam#0384: Especially when you dont have a local market
IRON MAIDEN#4184: ... iiiiik I'm getting micro atx red 775 today @Jam
IRON MAIDEN#4184: I'm spending to much money today
tdp2612#3835: :Frobot:
IRON MAIDEN#4184: 270$
Jam#0384: :Xdxdxd:
IRON MAIDEN#4184: Like 8 new boards |
2 new gpus
IRON MAIDEN#4184: And 8cpus and coolers
Jam#0384: My collection is at a place I’m more or less happy with very soon, I just need more HD 3/4/5/6 series cards
Jam#0384: And Maybe a polaris RX 570
Jam#0384: or something like that
IRON MAIDEN#4184: Iv got 4 HD cards and 1 is ded
Jam#0384: I have two and theyre both the worst
IRON MAIDEN#4184: Iv got a 3 4 and 5xxx
IRON MAIDEN#4184: And a red 3
IRON MAIDEN#4184: Xxx
IRON MAIDEN#4184: And im getting that r7 360 today
Razorsz#5056: i havexp era shit
Razorsz#5056: my old pc has a red geforce fx5500, red socket 936 board with a semperon
Razorsz#5056: xd
Jam#0384: 939 board |
Jam#0384: 936 doesnt exist
Jam#0384: FX 5500 is bad doe
CaldeiraG#0496: Fx5500 gang, I have one with my Pentium 4 in the garage
CaldeiraG#0496: Kinda sucks
Jam#0384: All the FX gpus are pretty bad, but the rare ones are kinda cool
Rysing Dragoon#5628: Anything with FX at the beginning is disappointing tech wise
DarknessFalls229#2286: FX 6800 Ultra
Jam#0384: 5800*
Jam#0384: There is an exception to that rule @Rysing Dragoon
Jam#0384: AMD Athlon 64 FX was great
Jam#0384: AMD FX was not
DarknessFalls229#2286: oh right, 5800
Jam#0384: I actually got a 6800 Ultra though
Jam#0384: Theyre also rare, but not so much as a 5800
Jam#0384: 5800 is like, unobtainable |
Alcyone#2233: only half decent geforce fx is the 5950 ultra
Jam#0384: ^
Jam#0384: Which is also overpriced anyways
Jam#0384: At least you wont have to pay $1000+ to get it. *cough* FX 5800 Ultra
Alcyone#2233: yeah youre better off getting something else unless you want FX for collecting
Alcyone#2233: prices on 5800 ultra and the final 3dfx cards are nuts
Jam#0384: I want an FX 5700 Ultra because its not that expensive but just to fill the gap because the FX 5200 is my only card
Alcyone#2233: there was one on ebay for like $20
Jam#0384: 3Dfx collecting is a hellhole
Jam#0384: Unless you want a Banshee or Velocity
Jam#0384: And even the prices on those are pretty nuts for what you get
Jam#0384: If you look hard some Voodoo 1 and 3 cards can be had for not awful prices
Jam#0384: But it’s all overpriced nostalgia nonsense
Jam#0384: Hardly any of those cards are proper rare
Alcyone#2233: only voodoo to get for me is the original, for the significance. many cheaper cards will game much better |
Jam#0384: ^
Jam#0384: I want the original too. I passed on it for this haul because the prices werent justified for me personally
Jam#0384: Waiting on a deal
Alcyone#2233: me too. I want one with the gold pcb though to match my ss7 board
Jam#0384: I already have a Voodoo 3 so I’m pretty finr where I am
Jam#0384: Theres a gold PCB one for $70 shipped rn
Jam#0384: But its from Hungary
Alcyone#2233: I did see that.
Alcyone#2233: there is 2, maxi gamer and a typhoon. pretty sure they are the same aside from the name
Jam#0384: yes
Jam#0384: I am watching both
Jam#0384: But I will likely not buy
Jam#0384: I know a lot about the stuff thats up right now as Ive been doing my hunt for a while
Jam#0384: Really happy with how my entire haul turned out though
Jam#0384: Got some huge acquisitions, things I thought I may never get |
hotmale420360#3948: whats the card you have thats worth the most?
Jam#0384: Uh
Alcyone#2233: mobo I have is mini dtx. i think it may fit in one of these bad bois https://cdn.discordapp.com/attachments/545181464363401216/666044791338958848/unknown.png
Jam#0384: My GTX 1080
Jam#0384: Lol
hotmale420360#3948: ye but retro
hotmale420360#3948: lets say anything before 2010
Jam#0384: Either the Rage Fury MAXX or GeForce 6800 Ultra
hotmale420360#3948: nice
Jam#0384: The MAXX is a very rare card, but not many people are looking to buy one
Jam#0384: Even then, they still sell $150-$275 on eBay
Jam#0384: and I have an og driver disc
Jam#0384: The 6800Ultra is pretty rare and very sought after
Alcyone#2233: small boy https://cdn.discordapp.com/attachments/545181464363401216/666045230105231380/unknown.png
hotmale420360#3948: mine is the voodoo 2 |
Jam#0384: I’ve seen them sell from $100-$350 on eBay
Jam#0384: 6800U
Alcyone#2233: Dunno about GPUs but for old motherboards the driver disk can be a lifesaver, sometimes its really hard to find old utilities and such
Jam#0384: I have a few boards with drivers yes
Jam#0384: But not any of my very good ones
Jam#0384: :(
Alcyone#2233: the best bios for my sk8v is lost to time.
Jam#0384: fortunately ASUS has a good database
Jam#0384: For a lot of their older stuff
Jam#0384: and a lot of my retro systems are built on ASUS boards
Alcyone#2233: except mine, they uploaded the final and the beta bios wrong, they are both the final version which doesnt have working mem timings
Jam#0384: Actually, all of them are
Jam#0384: Coincidentally
Jam#0384: lol
hotmale420360#3948: asus makes some good board |
Jam#0384: they used to
TheFifthAce#4128: they usued to
Alcyone#2233: pc chips gang
hotmale420360#3948: the caps last long
Jam#0384: Now theyre really meh until you pay big money
hotmale420360#3948: ye
Jam#0384: I have that PCCHIPS Socket 3 board
TheFifthAce#4128: crosshair impact is sexy doe
TheFifthAce#4128: dtx :GWempMoan:
hotmale420360#3948: yeeee
Jam#0384: I’d like one of them
Jam#0384: https://cdn.discordapp.com/attachments/545181464363401216/666046265255264270/image0.jpg
Jam#0384: A few of those cards are dead
Jam#0384: GeForce 3 Ti 500, X850XT, GTX 460
Alcyone#2233: you know your mobo pcb is thin when you can see through it :Hahahahaha: |
ERROR: type should be string, got "\nhttps://cdn.discordapp.com/attachments/337235779384508417/608183150820065290/IMG_20190805_222133330.jpg\nXbox 360 1953#2640: has anyone here contacted xfx support via their website?\nRysing Dragoon#5628: https://twitter.com/GrillInsane/status/1216543960052781056?s=09\nExomilav#5434: nice\nRysing Dragoon#5628: It's also a perfect loop\nRysing Dragoon#5628: Go figure\nRacey#8574: The light on the right cuts in after looping\nJ3FF#4970: can anyone here tell me how to undervolt a kepler gpu\nthatubuntuguy#5914: MSI Afterburner ?\nthatubuntuguy#5914: Enable voltage control\nthatubuntuguy#5914: Download a benchmark like unigine heaven or something which will run nicely on your Kepler gpu\nthatubuntuguy#5914: Run the benchmark and have MSI Afterburner open in front of it, go down in small increments and wait 30 sec until you see artifacting\nthatubuntuguy#5914: Or it crashes\nthatubuntuguy#5914: In that case go back to the increment before that and that's your final undervolt voltage" |
thatubuntuguy#5914: Why do you want to undervolt though? Dodgy cooler?
J3FF#4970: overheating
thatubuntuguy#5914: Right
J3FF#4970: cant use voltage control on msi
J3FF#4970: any other way of undervolting it?
thatubuntuguy#5914: I'd start by replacing the thermal paste
J3FF#4970: i did yesterday
J3FF#4970: still hot
thatubuntuguy#5914: And it didn't help.. how's the fan curve
thatubuntuguy#5914: Are the fans operational
J3FF#4970: even at max fan, its still hot
J3FF#4970: its running
thatubuntuguy#5914: Is the cooler clean
thatubuntuguy#5914: What thermal paste did you use
J3FF#4970: thermal grizzly |
thatubuntuguy#5914: Odd
thatubuntuguy#5914: I'm assuming you cleaned the cooler of dust
thatubuntuguy#5914: You didn't apply too much did you?
J3FF#4970: i cleaned my entire pc
J3FF#4970: i made sure it covered the die and its still relatively thin
thatubuntuguy#5914: Very odd
thatubuntuguy#5914: Was it overheating before
J3FF#4970: yes
thatubuntuguy#5914: Has it overheated since you got it
thatubuntuguy#5914: I mean from day one have you had heat problems
J3FF#4970: for 1-2 years it was okay
thatubuntuguy#5914: Hmm
thatubuntuguy#5914: Maybe you put too much, I've done that a few times and it wrecks the cooling
J3FF#4970: thermal paste?
thatubuntuguy#5914: Try again but only a pea size |
thatubuntuguy#5914: Yeah
thatubuntuguy#5914: What gpu is it
J3FF#4970: gt 630 lmao
J3FF#4970: this gpu shouldnt even overheat in the first place
thatubuntuguy#5914: That was exactly what I was about to say
thatubuntuguy#5914: Should have asked that first lol
J3FF#4970: it idles at 50 like mad
J3FF#4970: i actually repasted it 4 months ago
thatubuntuguy#5914: Did it help
J3FF#4970: it was fine
J3FF#4970: and then 4 months later
J3FF#4970: well, im here
thatubuntuguy#5914: Right, try again but use less paste
J3FF#4970: pea size?
thatubuntuguy#5914: Yeah should be alright |
J3FF#4970: ill try
J3FF#4970: if that doesnt work
J3FF#4970: what should i do
J3FF#4970: im also using a acer xc600
J3FF#4970: it has bad airflow from what people are saying
thatubuntuguy#5914: If the die is small I can't remember how big a 630 die is feel free to use even less
J3FF#4970: a bit smaller than a cpu die
thatubuntuguy#5914: Yeah by all means use less then
thatubuntuguy#5914: Pea size is generally the norm for CPUs with a heat spreader
J3FF#4970: hmm
J3FF#4970: okay
J3FF#4970: anything else?
thatubuntuguy#5914: Not really
thatubuntuguy#5914: If that doesn't work then maybe the cooler is damaged or warped and isn't making good contact with the die
J3FF#4970: idk if this is important info |
thatubuntuguy#5914: But we'll go down that alley when we need to
J3FF#4970: but when i repasted it 4 months ago, it was an x pattern
J3FF#4970: when i wanted to check the paste again yesterday
J3FF#4970: some of the paste sticked on to the heatsink (this is normal)
J3FF#4970: but i can fully make out letters on the die
thatubuntuguy#5914: Sounds pretty normal for freshish paste
thatubuntuguy#5914: Especially if there was too much
J3FF#4970: was x too much?
J3FF#4970: can the gpu start to overheat overtime in the span of 4 months just because of this?
thatubuntuguy#5914: Maybe, I have no way of telling
JustinXenyx#8854: Because GPUs are cooled at the die/silicon directly there is no such thing as too much paste, you'd much rather have too much instead of not enough
JustinXenyx#8854: But it seems like you didn't apply that much if you can still make out the text on the die
JustinXenyx#8854: Or your paste isn't the most high quality stuff and just gave up
JustinXenyx#8854: Also, @J3FF is it a passive GT630? Is it Fermi or Kepler?
thatubuntuguy#5914: There's a fan on it apparently |
thatubuntuguy#5914: It's Kepler
JustinXenyx#8854: Maybe the fan is dying
JustinXenyx#8854: Bad bearing and all
J3FF#4970: how do i know if the fan is dying
JustinXenyx#8854: The way the fan sounds usually is a bad giveaway
J3FF#4970: it sounds slightly rattled
J3FF#4970: almost not audible
J3FF#4970: its overheating on roblox too wow
wiryfuture🦀#1706: anyone know how to connect to Virgin media's *public* wifi on windows and manually on a phone? Their mobile app is absolute trash and doesn't work for me, it used to barely work but no longer does.
The app uses 802.1x EAP security and Idk how to set that up manually 😿
Heretic#2498: @wiryfuture🦀 the reason it uses EAP is because i think it can check your simcard
Heretic#2498: EE uses EAP with Sim authentication for their underground wifi
wiryfuture🦀#1706: @Heretic it's not sim auth
wiryfuture🦀#1706: it uses account username and password
RiIey#0001: Hi, i bought a headset 3 weeks ago and it has suddenly stopped working. The audio is really messed up and fuzzy and shit. pls help |
RiIey#0001: it only works when the cord is on a certain angle
JustinXenyx#8854: fucked cable
JustinXenyx#8854: Return while you have the chance to
RiIey#0001: the only thing i dont understand
RiIey#0001: is ive treated it like an angel
RiIey#0001: a fucking angel
RiIey#0001: so idk how it broke
JustinXenyx#8854: Sloppy manufacturing
JustinXenyx#8854: they didn't manufacture it properly
JustinXenyx#8854: you could've touched that thing like 3 times and it would still have ended up broken because the cable is funked
RiIey#0001: well fuck
RiIey#0001: i mean its a 50$ headset from target so maybe i should invest in something better
RiIey#0001: 👀
JustinXenyx#8854: HyperX Cloud (and its countless variations) is my personal recommendation for gaming headsets
RiIey#0001: https://www.youtube.com/watch?v=6PS_l2SWrrc if this clip can diagnose it more go watch it |
RiIey#0001: im playing regular universal studios sound
TheFifthAce#4128: just return nerd
RiIey#0001: dont have recipt
RiIey#0001: receipt*
Jam#0384: gamer moment
Deleted User#0000: @JustinXenyx
Deleted User#0000: I'm trying to flash my galaxy s7 but it freezes when it starts
Deleted User#0000: And hangs on recovery booting
Racey#8574: Did you clear the system partition
Deleted User#0000: How? @Racey
Deleted User#0000: I think I manage to flash it but its stuck on the samsung logo with recovery booting
Deleted User#0000: and it turns on and off
Razu#9651: Guys i need help i'm using a laptop and when i check how much memory is being used i see windows audio device graph isolation using 1 GB of ram idk how to fix it
Deleted User#0000: @Razu reinstall sound drivers
Jam#0384: Bruh moment |
Deleted User#0000: what would you guys say is a useable amount of ram on windows 10 for general use?
DarknessFalls229#2286: 4GB is minimum for a semi pleasant experience
DarknessFalls229#2286: so 4GBs or better
DarknessFalls229#2286: optimally 8GBs or more
MythologicalZ#3752: 4GBs on a SSD
MythologicalZ#3752: 6+ on spinning
JustinXenyx#8854: I'd say 8GB usually makes the most sense regarding price and performance
DarknessFalls229#2286: or 2GBs on E5400
MythologicalZ#3752: Taco edition 10
Racey#8574: 4 GB of ram is fine for me but I don't use memory heavy apps
Deleted User#0000: its just i upgraded a pc from 4gb to 8gb this pc does have a ssd but there was a noticeable differnce
DarknessFalls229#2286: i downgraded from 24 to 16 😦
JustinXenyx#8854: yeah but you upgraded from FX to Ryzen 3000
DarknessFalls229#2286: :p
Racey#8574: *sits in corner with 8 GB of RAM* |
Deleted User#0000: well i have 8gb here
BigPierogi#3368: 16gb geng
DarknessFalls229#2286: i once started with 3x2GBs of DDR2 667MHz
MythologicalZ#3752: I have 8 in single channel because my heatsink is fat
DarknessFalls229#2286: now ive got 16GBs of 3000MHz
Racey#8574: There's 6 GB sticks of ram
Racey#8574: What
DarknessFalls229#2286: woops
DarknessFalls229#2286: meant 3x2GB
DarknessFalls229#2286: which adds up to 6
Racey#8574: I have 2x4 GB DDR4 2666 MHz
Deleted User#0000: the phenom ii x3 720 is okay on windows 10 pro with 8gb ram and sd
DarknessFalls229#2286: i used an Athlon 64 4000+ single core CPU on win7 64 bit before
DarknessFalls229#2286: though, theres much, much worse
Racey#8574: Also I looked closer and it's not HyperX Fury it's G.Skill Ripjaws because I'm fucking stupid so I might be able to overclock |
DarknessFalls229#2286: as reminiscent of my single core Celeron D with 64-bit support
Racey#8574: I used 7 x64 on my Celeron M 560 laptop
Racey#8574: Ran fine
Racey#8574: And then when I upgraded to 10 x64 it ran like shit until it finished the first boot tasks
BigPierogi#3368: @DarknessFalls229 I have one
BigPierogi#3368: Celeron d 356
DarknessFalls229#2286: its slow innit?
BigPierogi#3368: Idk
BigPierogi#3368: Haven't used it in years
BigPierogi#3368: Stopped using in 2012
DarknessFalls229#2286: my athlon 64 2.4GHz gets 52cb on R15, the celeron D 3.33GHz gets 17...
BigPierogi#3368: When we went from xp to8
hare_ware#4880: My brother is giving me his 1660 in a few weeks, but it's blocking the SATA ports. Is buying a PCIE to SATA card a good choice? Or should I try to find sata cables that'll fit under that? Or should I start looking for a new motherboard? https://cdn.discordapp.com/attachments/545181464363401216/667489912135876638/IMG_20200116_165356442.jpg
Racey#8574: Plug it into the other PCI E port
Racey#8574: It'll do no performance difference |
JustinXenyx#8854: That's wrong? @Racey
hare_ware#4880: The front panel connector is there
Racey#8574: Get a new board then
JustinXenyx#8854: I highly suspect the second PCIe Slot is wired as X4, which would kick his performance to hell and back
hare_ware#4880: ^
hare_ware#4880: I can check Dell's manual. It's an Optiplex 990
Racey#8574: On my board it's 3 16x ports but it'll slow itself down because my CPU doesn't have much lanes
Racey#8574: If you have more than 1 card installed
JustinXenyx#8854: As to your question, i think getting a PCIe SATA card would probably work out if it can boot from those, check the internet for other people who may have done something similar
hare_ware#4880: Wait, I could get riser and mount the GPU vertically.
JustinXenyx#8854: @Racey Not all X16 ports are wired as X16
Xbox 360 1953#2640: I just used L cables on my dell board like that
Racey#8574: ~~Just get a PCI-E to M.2 and buy an M.2 drive~~
JustinXenyx#8854: @Xbox 360 1953 L cables probably wouldn't fit under there
Xbox 360 1953#2640: they did on my 7010 board |
Xbox 360 1953#2640: my card was a little shorter than most so mileage may vary
hare_ware#4880: @Xbox 360 1953 Do you have a link to what cables you used?
Xbox 360 1953#2640: I just had them lying around
JustinXenyx#8854: @hare_ware Vertically mounting it is an option, but you gotta have a proper case for that
JustinXenyx#8854: Otherwise you might end up with the card stuck behind a side panel unable to suck air in properly
hare_ware#4880: Yeah, right now it's in a wooden test bench so rip
Alcyone#2233: is there any clearance between the shroud and sata ports, you could maybe just use 90 degree cables and put them in first before inserting the gpu
JustinXenyx#8854: You could probably get away with using a flexible riser in an ATX case and just mounting the card to the lower slots
TheFifthAce#4128: @hare_ware just get a sata card, they're cheap as shit and easy to install
IRON MAIDEN#4184: @hare_ware get the right angle sata cords?
IRON MAIDEN#4184: or get PCIE extender and mod case
CaldeiraG#0496: Found a full computer with a 2400g with 8gb of ram for 250€, is it hot garbage or somewhat good price?
JustinXenyx#8854: That's not too bad, what are the other specs?
JustinXenyx#8854: like PSU, Motherboard etc
JustinXenyx#8854: Also how high is the RAM clocked? With those APUs RAM clock really matters |
CaldeiraG#0496: Nvm it's a 2200g and 2400mhz
CaldeiraG#0496: https://cdn.discordapp.com/attachments/545181464363401216/667743366678708244/Screenshot_2020-01-17-14-53-09-827_com.fixeads.olxportugal.jpg
CaldeiraG#0496: Seems like hot garbage now
JustinXenyx#8854: That PSU is definitely hot garbage
CaldeiraG#0496: Ye
CaldeiraG#0496: Nox PSUs are also hot garbage
JustinXenyx#8854: Even with the 2200G it is semi-decent, but the low clocked RAM and the gigabyte mobo kinda throw me off
CaldeiraG#0496: People still buy them
CaldeiraG#0496: Yea, it's not much appealing now
CaldeiraG#0496: Thanks for the advice
wiryfuture🦀#1706: I need some help setting up my server I'm unsure of how to set up my storage repositories
wiryfuture🦀#1706: It's running xcp-ng and I've got two disks running in raid and an ssd
TheGeekster#8508: that's pretty, specific, with adding storage repositories to xcp, you'll need to use the command line after install, or you add them at install time
TheGeekster#8508: you can only add network storage through xcp-ng center
TheGeekster#8508: https://support.citrix.com/article/CTX130897 @wiryfuture🦀 |
wiryfuture🦀#1706: alr
wiryfuture🦀#1706: I'm confused as to what I'm meant to do, as the raid drives appear as separate drives
TheGeekster#8508: are you using hardware raid? or software? software raid is only supported for the boot drive afaik
wiryfuture🦀#1706: hardware
TheGeekster#8508: doesn't appear like the hardware raid is working properly then, if it's showing seperate drives with fdisk
wiryfuture🦀#1706: ok
wiryfuture🦀#1706: PERC s110 will have a look
wiryfuture🦀#1706: I think I need to reinstall anyway because I have to add the SSD at installation or you can't
TheGeekster#8508: yeah honestly it's easiest to just do it with the install wizard, not a clue why there isn't a wizard after install
wiryfuture🦀#1706: I physically can't add the ssd because "The SR operation cannot be performed because a device underlying the SR is in use by the server"
wiryfuture🦀#1706: that's what happens if you don't select the boot device to add as an SR
wiryfuture🦀#1706: surely just copying the install SR wizard to the centre wouldn't be that hard
TheGeekster#8508: *yeahhhh* you'd think that
TheGeekster#8508: one thing i've run into with the installer too, it doesn't wipe disks before installing too, so if you reinstall, you have to boot into something else to properly wipe the drives partitions
wiryfuture🦀#1706: that's fine the IDRAC can do that |
wiryfuture🦀#1706: EXT or LVM
TheGeekster#8508: ext i imagine
wiryfuture🦀#1706: ok
wiryfuture🦀#1706: the raid setup isn't working
wiryfuture🦀#1706: um
wiryfuture🦀#1706: why
wiryfuture🦀#1706: I deleted the virtual disks of the HDD
wiryfuture🦀#1706: created a raid 1 virtual disk, finished the setup and booted
wiryfuture🦀#1706: and it's still showing up as two separate disks
TheGeekster#8508: ohhhh shit sorry i didn't read it properly, the Dell S110 is software raid, it's not a hardware raid controller
TheGeekster#8508: there's certain weird shit that can happen with software raid that isn't explicitly supported by the OS, i'd suggest not configuring raid in the controller, just have it pass the disks through, then create raid 1 software during the install of xcpng @wiryfuture🦀
wiryfuture🦀#1706: ok
wiryfuture🦀#1706: I think I've got it set up correctly now
wiryfuture🦀#1706: (still installing)
wiryfuture🦀#1706: what the fuck |
wiryfuture🦀#1706: I think it tried to create a raid array using the ssd and hard drives
wiryfuture🦀#1706: and now I have 152.9GB from a 120GB SSD and two 1TB HDDs
wiryfuture🦀#1706: this is fucking tiring lol
tdp2612#3835: :frobotmoment:
TheGeekster#8508: oh god you can't mix SSD's and hard drives in a raid
TheGeekster#8508: that'll fuck up pretty badly, in a raid, all disks *should* be the same size, or it'll use the smallest size @wiryfuture🦀
wiryfuture🦀#1706: @TheGeekster No, the xcp installer fucked it up
wiryfuture🦀#1706: right now I can see "sda - 119GB ATA" and "RAID 127(sdb,sdc) - 931GB ATA"
wiryfuture🦀#1706: do I install xcp on the raid disks or on the SSD?
TheGeekster#8508: raid 127 will install onto the raid1 of the ssd's
wiryfuture🦀#1706: should I I install on the HDD or SSD?
wiryfuture🦀#1706: I'll try install on the raid
wiryfuture🦀#1706: I think it messed up when it got to the virtual machine storage set up part
wiryfuture🦀#1706: should I only select the raid when setting up vm storage at the install?
wiryfuture🦀#1706: I think it's a better idea? |
TheGeekster#8508: best thing to do is just to try different ways until you figure out which works, personally i don't know as our storage is over the network, only boots to local
wiryfuture🦀#1706: installing on raid is taking forever
wiryfuture🦀#1706: took about 10 minutes earlier, has been going for over 30 minutes now
tony#0083: hey guys
tony#0083: i just reinstalled windows and my gpu is dropping clock speed for some reason
tony#0083: from arround 1600 to 200
tony#0083: and its at 35 celsius
tony#0083: any idea why?
TheGeekster#8508: under stress? or at idle?
Jam#0384: Raid is boring
wiryfuture🦀#1706: I finally did it
wiryfuture🦀#1706: that took so long, end me
tony#0083: at idle
TheGeekster#8508: yeah that's fine? when it's not under usage it just down clocks to save power @tony
navibu#7218: Hey guys what is the difference between Logitech G102 and G103? |
navibu#7218: They're both selling at the same price
tdp2612#3835: https://www.reddit.com/r/LogitechG/comments/98uela/what_is_different_between_mouse_g102_and_mouse/
tdp2612#3835: 103 is just an updated name, hardware wise theyre identical essentially
tdp2612#3835: so go for the 103 as it should be a bit newer
navibu#7218: Thanks:feelsgoodman:
boog#9487: my pc has an issue where the volume will jump up to a bit like when a youtube ad plays but it doesn't go back down so its not the ad being loud and when i move the volume slider down then back to where it was its not as loud as when the issue happened does anyone have any ideas?
Jam#0384: Make sure the mixer has everything set the same and youtube is turned all the way up
Jam#0384: Then adjust from there on system volume
boog#9487: I just reinstalled windows
boog#9487: I had too much shit installed
boog#9487: Seems to have fixed that as well
boog#9487: Also sorry for the very late reply I asked that while I was about to pass out
Clode#2428: What you guys think ab the cooler master devastator 3?
tdp2612#3835: is that just kb
tdp2612#3835: or just mouse |
tdp2612#3835: or both
tdp2612#3835: because that kb looks like a rebranded pile of shit imo, but the mouse is probably ok
Clode#2428: Do you think the kb is that bad?
tdp2612#3835: i mean its a cheap combo
tdp2612#3835: which just further suggests its just a generic chinese thing, witch coolermaster stickers on it
tdp2612#3835: you can probably find it under a different name on ebay
Clode#2428: What do you recomend for a combo then?
tdp2612#3835: im not qualified to make any recommendations, i use a keyboard and mouse from a hp prebuilt from 2014
tdp2612#3835: go into currys or something, have a look at keyboards and mice there, see what you like and then watch ebay/amazon etc for cheap ones
Clode#2428: Ok
Clode#2428: Thanks for the help
tdp2612#3835: i mean i could be ompletely wrong
tdp2612#3835: it could be the best budget keyboard/mouse combo out there
JustinXenyx#8854: @Clode trash, i wouldn't bother with it
JustinXenyx#8854: It has a super mediocre keyboard with what seems to be a low-budget mouse |
JustinXenyx#8854: AKA you'd be better off buying a keyboard and mouse seperately
TheFifthAce#4128: @Clode I can help :uwuPip:
TheFifthAce#4128: whats budget
TheFifthAce#4128: what kind of keyswitches do you like
JustinXenyx#8854: considering he wanted to buy a rubber dome keyboard i don't think he has thought much about mechanical keyboards yet
TheFifthAce#4128: :crome:
TheFifthAce#4128: cringe
Clode#2428: I wana some cheap combo that doesnt succ
TheFifthAce#4128: yes I can get you that
TheFifthAce#4128: what budget
Clode#2428: Idk
Clode#2428: 40 euros
TheFifthAce#4128: cromge
TheFifthAce#4128: france?
Clode#2428: 40 dollars i think |
TheFifthAce#4128: :ThonkFish:
TheFifthAce#4128: that's not what I was asking
JustinXenyx#8854: what
Clode#2428: Whut
TheFifthAce#4128: which country
Clode#2428: Portugal
TheFifthAce#4128: :Cringe:
TheFifthAce#4128: oh no
Clode#2428: But im trying online
Clode#2428: Like amazon or somethink
Deleted User#0000: @Clode check out Aukey's mech keyboard on amazon
Deleted User#0000: it usually is around £23
Deleted User#0000: https://www.portugalist.com/amazon-portugal-shipping/
Deleted User#0000: https://www.amazon.co.uk/Redragon-K552-Backlit-Mechanical-Keyboard/dp/B016MAK38U/ref=sr_1_17?keywords=aukey+mech+keyboard&qid=1579535627&sr=8-17
Deleted User#0000: could get this |
Deleted User#0000: and their cheapish mouse
Deleted User#0000: https://www.amazon.co.uk/dp/B0751D11BL/ref=sspa_dk_detail_1?pd_rd_i=B0751D11BL&pd_rd_w=S3W0I&pf_rd_p=1055d8b2-c10c-4d7d-b50d-96300553e15d&pd_rd_wg=Kt4Pp&pf_rd_r=K26HGWRZWDT07EBR82BZ&pd_rd_r=0f508bdd-0c25-464c-9245-b3afefc21e56&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExRThRRUZLVTRYREgzJmVuY3J5cHRlZElkPUEwOTI4NzUyMTJESVdLNUI2UUtYSyZlbmNyeXB0ZWRBZElkPUEwMzcwMzA3MlNKSkxIRlVYM0RUUyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Xbox 360 1953#2640: https://pcpartpicker.com/list/jN4kjp does this seem like a decent build for not gaming
Xbox 360 1953#2640: like, browsing the web and shit while also maintaining upgradability
MythologicalZ#3752: Seems overkill for that
Xbox 360 1953#2640: My mom says she wants something to last
Xbox 360 1953#2640: And yeah, I agree
Xbox 360 1953#2640: "i want an i9"
MythologicalZ#3752: I would down cost the CPU to a 2200G, maybe an a320 board too
MythologicalZ#3752: Rest looks fine
Xbox 360 1953#2640: Any a320 board you'd recommend?
tdp2612#3835: yeah i was gonna say same
tdp2612#3835: maybe like a 2400
MythologicalZ#3752: They're all pretty much the same thing tbh since Garbo tier and all
MythologicalZ#3752: Would pick the cheapest |
Xbox 360 1953#2640: Alright, thanks
MythologicalZ#3752: Well actually that's not true
MythologicalZ#3752: A320 Pro4 is probably the best
MythologicalZ#3752: Not sure on pricing but it's the same vrm as the b350 and x370 versions
Xbox 360 1953#2640: amazon sells that for 78 usd
Xbox 360 1953#2640: i think that's actually more than the b450 pro4
MythologicalZ#3752: Lol
Xbox 360 1953#2640: i added the asrock hdv one since it seems alright i gues
Clode#2428: Thanks
TheFifthAce#4128: hdv is gay but fine
TheFifthAce#4128: better than a prime
wiryfuture🦀#1706: what do I need to do to start a VM on server boot? Got this checked but it doesn't work. (xcp-ng) https://cdn.discordapp.com/attachments/545181464363401216/668882896790093855/unknown.png
TheGeekster#8508: @wiryfuture🦀 Pretty sure you need to set a boot order as well
wiryfuture🦀#1706: boot order breaks it
wiryfuture🦀#1706: Changed everything back to 0 and it fixed it |
wiryfuture🦀#1706: with a delay
TheGeekster#8508: huh fair enough
boog#9487: Should I use a 120mm Corsair h60 or a be quiet pure rock slim on a ryzen 3 1200? I have both coolers
MythologicalZ#3752: I'd use air because AIO reliability is cringe
CaptainFlanger#2563: Questionable at best.
tdp2612#3835: yeah id say air
tdp2612#3835: you dont need the extra cooling ona cchip like that
JustinXenyx#8854: You theoretically won't usually need either of them, but if i had to choose between the two i'd go with the air cooler
JustinXenyx#8854: Putting a chip like that on water makes A. no sense B. is it an AIO water cooling solution, meaning you can basically toss it out after a solid 2 years of usage
Jam#0384: 4 if youre lucky but that unit is kinda not good
boog#9487: Alright I'll stick with air
boog#9487: Sorry for the late reply
boog#9487: I was in school
boog#9487: And also just generally forgot
Jam#0384: https://cdn.discordapp.com/attachments/545181464363401216/669337864827568129/image0.png |
Deleted User#0000: Does anyone know where to find the stock rom for the s7 sm-g930v
Deleted User#0000: @JustinXenyx
SuSSudio#2688: Is it okay to leave nvidia driver installed & install radeon driver and let it run on top of it? because i'll be using HD 6850 in the matter of days just for testing
SuSSudio#2688: I don't have a second rig solely for that testing purpose, sadly
JustinXenyx#8854: No, always clean the drivers out
SuSSudio#2688: Hmm aight then
TheGeekster#8508: @JustinXenyx Just gonna leave this *absolute beauty of a brand new prebuilt* here https://www.ebuyer.com/899528-xenta-core-i5-8gb-ram-240gb-ssd-gt-710-no-os-desktop-xr-d5027
JustinXenyx#8854: Yikes
Alcyone#2233: 9400f with gt 710, that is worse than just a 9400 heh
JustinXenyx#8854: why even bother with the 710, when the iGPU is probably faster
Alcyone#2233: F sku have no igp
JustinXenyx#8854: oh, right
JustinXenyx#8854: Intel cucked them of something that their CPU was potentially good for
Alcyone#2233: it mustve been cheaper for them to buy a bunch of 9400f+710s in bulk than getting normal 9400s
SuSSudio#2688: reminds me of 2000s again |
SuSSudio#2688: whereas dgpus were common in basic pc
Alcyone#2233: also 8gb single channel 2400
Alcyone#2233: 9th gen does 2666 on locked cpus. but thats not too bad. could always just pop a matching dimm in there for 16
TheGeekster#8508: it's just beautiful 😩
Alcyone#2233: I was thinking maybe thats not a trbl price. then I built a cheap 360gbp pc in pcpp
https://uk.pcpartpicker.com/list/sCtGx6
TheGeekster#8508: love it, that's also got a power supply and not a fire hazard powering it
Lady Mipha#0611: or a bomb counting down
Alcyone#2233: you could probably get a cheaper non modular and switch it up to 16gb ram as well. that would probably be better for an apu.
Raptor#0229: What happens if in 4 ram slots mobo i put 4 ram sticks of 2 different brands?
Raptor#0229: Same specs, same speed
Jam#0384: It depends, typically theres no issue
Jam#0384: But your overclocking mileage may vary
Jam#0384: You could also have issues doing that sort of thing on a Ryzen 1000 series processor
Jam#0384: Essentially, while there may be an incompatibility issue there will likely be no issue at all |
Jam#0384: I’ve done this a million times
Jam#0384: Your matching specs make it ideal
Jam#0384: @Raptor
Raptor#0229: 2x2GB Corsair High Performance 800Mhz, 2x2GB G.Skill High Performance 800Mhz with a Q6600. No overclocking
Raptor#0229: @Jam
Jam#0384: On LGA775 I’ve not had an issue mixing ram
Raptor#0229: Nice
Raptor#0229: thanks :D
DarknessFalls229#2286: in my experience 775 can be finicky with ram, but not with mixing random sticks
Deleted User#0000: Hey @JustinXenyx sorry for the ping but I got my s7 to boot into android finally but it died and now it’s stuck in a boot loop. Again.
Deleted User#0000: It hangs on recovery mode as well
JustinXenyx#8854: Hmm, when did it die? During the log-in process? @Deleted User
JustinXenyx#8854: Kinda fearing that the phones internal storage is dying if it just died like that
Deleted User#0000: When it booted up the battery was at 5%
Deleted User#0000: I was able to make it through the setup process |
Jam#0384: Why not keep it plugged in while install?
Jam#0384: Didn’t the 3DS teach you anything
Deleted User#0000: I never owned a 3ds
Jam#0384: See, that is the issue
Deleted User#0000: I didn’t expect it to install anything after the setup
Deleted User#0000: It was only installing something for Verizon
Jam#0384: Start the setup over perhaps?
Deleted User#0000: I can’t get it to boot into android
Deleted User#0000: According to the phone it’s 0% when I charged it to 30% like an hour ago
JustinXenyx#8854: I'd probably deadline it properly (Like letting the thing discharge for a day or so) and then charge it up
JustinXenyx#8854: Lithiums can be wonky with charging when they haven't been properly charged in a while
Alcyone#2233: try plugging it in and starting it in recovery mode
Alcyone#2233: its hold volume up or down and pwr iirc. oh scrolled up nvm
Deleted User#0000: I can only get it into maintenance boot mode
Deleted User#0000: Never gets any further than that |
Deleted User#0000: This all started after a update
Deleted User#0000: https://cdn.discordapp.com/attachments/545181464363401216/669628419797024797/image0.jpg
Deleted User#0000: Gets stuck on this
Deleted User#0000: Blue light also stays on even when it’s off
Deleted User#0000: @JustinXenyx
Deleted User#0000: @Alcyone
Racey#8574: @Deleted User It's a Snapdragon S7, it's bootloader is locked
Deleted User#0000: I know that
Racey#8574: Only Exynos S7s are flashable
wiryfuture🦀#1706: send help my softether vpn server VM has a dhcp server (I think) and it's having mad beef with my router, the internet speed is way down, latency is in the thousands of ms and my chromecast and google home mini don't work
wiryfuture🦀#1706: router is assigning 192.168.0.x but the vpn is trying to assign 192.168.30.x
KeZz#4943: https://pcpartpicker.com/list/dHPw7T - Looking to change from 1050 TI to this card. Do you think this one will just slot into the slot my 1050 ti is without an issue?
JustinXenyx#8854: @KeZz Just a friendly reminder, you copied the wrong PCPP link
KeZz#4943: Is that better?
JustinXenyx#8854: yeah, that's the correct one |
JustinXenyx#8854: The 1650 Super is basically gonna be a slot in replacement
JustinXenyx#8854: Just yank the 1050Ti out and slide the 1650 Super in
KeZz#4943: Are you 100% sure? Not to doubt you, but i really dont want to wait for it to arrive and then sit there all sad since it wont fit
JustinXenyx#8854: I'd say to check for a 6 pin PCIe cable on your power supply for the 1650 Super but given that your rig is modern enough to have a 1050Ti i don't think your PSU would lack important connectors like that for later upgrades
KeZz#4943: I think 1650 is plug and play, no wire?
KeZz#4943: Or im just misinformed
JustinXenyx#8854: The regular 1650 is mostly plug and play
JustinXenyx#8854: the 1650 and 1650 Super however are different cards
KeZz#4943: Ah
KeZz#4943: Interesting.
JustinXenyx#8854: The 1650 Super is essentially what would've been the 1650Ti
KeZz#4943: If i dont see any ports on the power supply, then im stuck getting only plug and play cards?
JustinXenyx#8854: You need to look for either of these power connectors, in a lot of cases labeled with PCIe https://cdn.discordapp.com/attachments/545181464363401216/669839489220476949/396553d1301356833-neue-grafikkarte-fuer-shuttle-xpc-sp35p2-35850d1238482693-graka-2mal-6-pin-mit-6-u.png
JustinXenyx#8854: If you don't have them, then yeah you're limited to cards that do not require any external power and just run off the power given by the PCI Express slot
KeZz#4943: Thank you Justin. Think 1650 non super is still a good replacement for 1050 TI. Or do i have better options? With only plug and play. |
KeZz#4943: Just seems like the price for 1650 and 1650 S is near the same, but the performance difference is huge
KeZz#4943: Quite sad news for me XD
JustinXenyx#8854: Honestly, i'd probably stick with the 1050Ti as the 1650 would be hard to justify considering it wouldn't be that much better performance wise
JustinXenyx#8854: I would probably upgrade the power supply to something a bit more powerful and then maybe get something like a 1650 Super or 1660 Super later on
KeZz#4943: My power supply is ATX-5000 model. Says ATX Switching power supply or similar on the box.
JustinXenyx#8854: Oh geez, to be honest that doesn't sound like it is a decent power supply
Lady Mipha#0611: :this:
KeZz#4943: Its done well for me so far. But yeah, doesnt seem to be that popular of a power supply.
KeZz#4943: Heres the story. About 1.5 years ago i bought the system off someone second hand for £400. 1050 TI, 8GB DDR3, I5 4590, That power supply, Asus H81M-PLUS Micro ATX LGA1150 Motherboard
KeZz#4943: Its worked for me just fine over the time ive had the system. But recently i just purchased a 144 HZ display to replace my LG TV (22 inch 5ms response - 60 hz).
KeZz#4943: LG 24GM79G - £120. Not too bad price wise. Just thought future proof my display for any future updates. The 1050 TI does run quite a lot of games decently, but best i get in Siege is 80-100 FPS without making it look shitty. So i starting looking at cards that can boost that performance up into 120-140 range.
JustinXenyx#8854: I figured that you might want to replace the 1050Ti for games you want to take advantage of 144Hz on
KeZz#4943: Exactly. But im looking at solutions to that issue without having to replace multiple parts.
JustinXenyx#8854: I would probably replace that power supply before it starts causing issues either way, a cheap power supply can kill your system at any point, since these things rarely are made with decent parts and are basically ticking time bombs
Lady Mipha#0611: :this: |
JustinXenyx#8854: And a better power supply would also give you more headroom for potential graphics cards you could upgrade to
KeZz#4943: Heres the power supply - https://www.ebay.co.uk/i/254337502869?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=254337502869&targetid=885827485884&device=c&mktype=pla&googleloc=1007256&poi=&campaignid=7412990374&mkgroupid=89868909033&rlsatarget=aud-381667280803:pla-885827485884&abcId=1139366&merchantid=110365571&gclid=Cj0KCQiApaXxBRDNARIsAGFdaB-EqG_mFKiTnBmQW3Wv5eOe7ykqDx8_0mXUTW-2kRzHj5A2XCzBhx4aAh_jEALw_wcB
JustinXenyx#8854: Christ o mighty, i would be keen on replacing that REALLY soon
Lady Mipha#0611: :monkaX:
KeZz#4943: Haha, that bad then?
JustinXenyx#8854: The fact it has held up for 1.5 years with your i5 and 1050Ti is pretty surprising
JustinXenyx#8854: Yeah it is terrible to say it lightly
KeZz#4943: I mean, its held up 3 years ish
JustinXenyx#8854: Even more surprising then to be perfectly honest
JustinXenyx#8854: These chinese power supplys usually don't last too long with components like that
JustinXenyx#8854: https://uk.pcpartpicker.com/list/GCJKCb You could buy these 2 components, which would be an upgrade to your graphics card and give you a much better power supply all while not costing much more than a 1650 Super while basically performing identical to it
JustinXenyx#8854: Also, that RX570 has twice the VRAM than the 1650 super, which is another added bonus on-top
JustinXenyx#8854: Although, come to think of it, R6S may be one of the few games that favors Nvidia cards a lot over AMD cards if my memory serves me correct
JustinXenyx#8854: You could probably just end up going with the 1650 Super from Zotac and the power supply from that PCPP link and end up just shy of 200 quid, which wouldn't be too bad all things considered
Lady Mipha#0611: @KeZz :this: |
KeZz#4943: Ooo, that could work
KeZz#4943: £40 power supply and £140 card - £180 isnt too far off my budget for this small upgrade
KeZz#4943: Now, a GPU is easy to put in. But power supply, is it just as easy? Or am i risking messing up?
KeZz#4943: Ive only done minor changes, like ram switching or gpu in the past. Nothing power or motherboard related.
JustinXenyx#8854: It is easy
Lady Mipha#0611: Psu should be easy depending on case
JustinXenyx#8854: You can't plug a cable into the wrong spot
JustinXenyx#8854: Unless you're REALLY set on plugging the wrong cable into the wrong connector
KeZz#4943: Alright 🙂
KeZz#4943: And ye, r6s is working with nvidia
KeZz#4943: So its optimised for Nvidia cards over AMD
JustinXenyx#8854: Yeah then the 1650 Super is probably the better option for you
KeZz#4943: Alright. Ill keep that link and possibly buy the 1650 S and Power supply at the end of the month.
KeZz#4943: I guess its better to spent £40 for a power supply with less risk to the system + get a GPU thats actually a big improvement
Deleted User#0000: So my problem is that the phone freezes before it can do anything |
Deleted User#0000: I can get it to recovery mode but it restarts when loading
Deleted User#0000: I’ve tried everything. I flashed it with the stock rom in Odin *which was successful*
Deleted User#0000: But didn’t solve my problem
Deleted User#0000: I’m just considering throwing this phone away, cause Samsung couldn’t fix it and I’m not paying to send it to a technician that probably can’t fix it either, and I can’t sell this phone because of the issues
SuSSudio#2688: @JustinXenyx @MythologicalZ Need help on radeon crimson 16.2.1 software
SuSSudio#2688: So the radeon control panel refuses to open due to missing msvcp120.dll
MythologicalZ#3752: Visual C++ issue
Lady Mipha#0611: ^
MythologicalZ#3752: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
DarknessFalls229#2286: im getting that issue on some of my fresh windows install too
MythologicalZ#3752: Just download and install all the packs
MythologicalZ#3752: I've had it too a few times
SuSSudio#2688: Yeah but the required MS Visual C++ 2013 had already installed
SuSSudio#2688: So a reinstall of that component should rectify the issue?
MythologicalZ#3752: both x86 and x64? |
SuSSudio#2688: x86 only
SuSSudio#2688: could be it?
Lady Mipha#0611: you need both
MythologicalZ#3752: Reinstall that and install 64
SuSSudio#2688: ok
MythologicalZ#3752: Should fix it
SuSSudio#2688: @MythologicalZ @Lady Mipha Solved, thx you two https://cdn.discordapp.com/attachments/545181464363401216/669896720439836704/Radeoncontrolpanelworks.JPG
MythologicalZ#3752: :TheGoods:
KeZz#4943: Gigabyte
4.3 out of 5 stars 3Reviews
Gigabyte GeForce GTX 1650 Super OC 4G (4GB GDDR6/PCI Express 3.0/1740MHz/12000MHz )
- Does this card need a power supply direct connection?
SuSSudio#2688: Single 6 pin |
KeZz#4943: How can you tell?
SuSSudio#2688: Look around the front end of the card
MythologicalZ#3752: https://www.gigabyte.com/za/Graphics-Card/GV-N165SWF2OC-4GD/sp#sp
MythologicalZ#3752: Pics and the spec page
KeZz#4943: So it will need to slot into the motherboard and then also run a wire to the power supply?
SuSSudio#2688: yes
KeZz#4943: Is there a name for cards that only need to slot into the motherboard?
DarknessFalls229#2286: it will need a PCIe 16x slot on the motherboard and a 6pin power connector from the power supply
SuSSudio#2688: GTX 1650, the regular one
KeZz#4943: Without a wire into the power supply
KeZz#4943: Is there a general name for them?
MythologicalZ#3752: 6 and 8 pin
DarknessFalls229#2286: theres a handfull of cards that dont use external power, but it doesnt really have a name
MythologicalZ#3752: 75w cards
DarknessFalls229#2286: some models do and others dont use extra power |
SuSSudio#2688: Look for Zotac GTX 1650 Super @KeZz
KeZz#4943: Zotax gtx 1650 super doesn't need more than just motherboard connection?
KeZz#4943: But it's still super?
KeZz#4943: Is that the only super that doesn't need a cable connection?
SuSSudio#2688: nvm zotac needs 6 pin aswell
SuSSudio#2688: despite smaller pcb
MythologicalZ#3752: Afaik all 1650S cards need a 6pin
KeZz#4943: Oh ok
KeZz#4943: That's what I thought
SuSSudio#2688: your option is very limited
DarknessFalls229#2286: But do you not have external pcie power @KeZz
SuSSudio#2688: best you can get is the regular 1650
KeZz#4943: Ye, I think I'll have to buy a power supply with the ability to connect to it
DarknessFalls229#2286: what PSU do you have?
KeZz#4943: A pretty shit one |
SuSSudio#2688: Most modern power supplies comes with atleast one 6 pin connector
KeZz#4943: ATX 500b or something
KeZz#4943: I spoke about it with Justin earlier today, just above
DarknessFalls229#2286: might be a good idea then to buy a better PSU first before getting a better GPU
SuSSudio#2688: ^^
KeZz#4943: Ye
DarknessFalls229#2286: being limited to a 75watt slot is also not that nice
KeZz#4943: I know. Haven't had an issue since I use a 1050 ti
SuSSudio#2688: I expect more video cards with no ext power connectors this decade though
DarknessFalls229#2286: as long as you dont overclock and stick to that 75 watt its fine
KeZz#4943: But any upgrades will need a power supply change or it will result in getting a worse card.
SuSSudio#2688: As efficiency goes up
KeZz#4943: Should I not try OC the 1050 ti?
DarknessFalls229#2286: im pretty sure the 1650 IS an upgrade, but by not that much
SuSSudio#2688: Slight OC is fine, moderate OC might not make your card last very long |
DarknessFalls229#2286: if you want to OC your 1050ti you will be constraint to 75 watt,
KeZz#4943: How much does it usually pull?
SuSSudio#2688: Except you got the factory OC'ed model, which comes with 6 pin connector
SuSSudio#2688: iirc it tops at 78w under max stress for the 1050 ti
KeZz#4943: Thank you
KeZz#4943: So btw, I can OC my 1050 TI still? Just not as much due to Watts?
KeZz#4943: Anyone done it, whats the rough OC limit for the card and performance gain?
DarknessFalls229#2286: just increase clocks step by step until unstable, then go back one step until its stable again
MythologicalZ#3752: There are specific increments for Pascal
MythologicalZ#3752: But I doubt that it'd matter for a 1050ti
KeZz#4943: So, +50 on core clock and then run the bench?
MythologicalZ#3752: 25 is better
MythologicalZ#3752: Since less variables
MythologicalZ#3752: And don't increase mem and core at the same time
MythologicalZ#3752: Since then you have doubts about what crashed |
KeZz#4943: Alright. Ill let you know what it gets up to when I try it later.
KeZz#4943: Stable at 150 so far. Will try 175 next.
KeZz#4943: 190 seems stable still
KeZz#4943: Either I'm messing up and not changing anything, or I got lucky with this GPU
KeZz#4943: @MythologicalZ Are you around?
TheFifthAce#4128: hi
TheFifthAce#4128: I am around
KeZz#4943: Hey
KeZz#4943: So I'm doing right now. It's at +200 and seems fine.
TheFifthAce#4128: 200 core or mem
KeZz#4943: The score goes up with each Benchmark by a little bit
KeZz#4943: Core
TheFifthAce#4128: :hmm: lucky then
TheFifthAce#4128: which bench
KeZz#4943: Hold on, forgot the name. I'll check once this Bench ends. |
KeZz#4943: Something ...position. Unigine 2 powered.
KeZz#4943: Give me a sec, 13/17 now.
TheFifthAce#4128: superposition
KeZz#4943: Ye
KeZz#4943: On extreme
TheFifthAce#4128: I mean, keep going until you see fucky things or you hit a temp limit
TheFifthAce#4128: 200 isnt unreasonable
TheFifthAce#4128: I had a 900mhz oc on a gt 730, but that's kepler, not pascal
KeZz#4943: What's the temp I should be concerned about?
TheFifthAce#4128: anything above 90c
TheFifthAce#4128: 85c or below is fine
KeZz#4943: Oh ok, still low 60c
TheFifthAce#4128: yeah thats more than fine
KeZz#4943: Should I do 210 now? Or 225?
KeZz#4943: Just did 200 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.