model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
709604 | Salt and Pepper Mill tray | <p>Salt and pepper mill tray.</p><p>Fits up to 55mm diameter mills, like the small 18cm Peugeot mills.</p><p>Perfect to catch the dust from the mills</p> | [
"tray",
"saltandpepper",
"salz",
"pfeffer",
"peppermill"
] | Household > Kitchen | [
"709604/images/image_1_compressed.jpg"
] | [
"709604/stls/peugeot-salt-and-pepper-55mm_v1.stl"
] | CC0 | https://www.printables.com/model/709604 | data_0047.tar |
1091220 | Salt Shaker Pepper Shaker Salt Jar Salt Box Salt and Pepper Jar Pepper Box Peprenka Slanka easy printable without suport | <p>Holes in cup 2mm(H) 2,5mm(I) and 3mm(J).</p><p>Jars diameter cca 40mm, volume cca 80-90ml.</p><p>Walls thickness 2mm.</p><p>For salt recomended J2 cup, for pepper H2.</p><p>Filament need for shaker (jar with cup) cca 12m.</p><p>Tested PLA 0,2mm, random seam.</p><p>Spice organizers:</p><div data-printables-embed=""><... | [
"box",
"print",
"easy",
"and",
"shaker",
"salt",
"saltshaker",
"pepper",
"spice",
"jar",
"peprenka",
"slanka"
] | Household > Kitchen | [
"1091220/images/image_1_compressed.jpg",
"1091220/images/image_10_compressed.jpg",
"1091220/images/image_11_compressed.jpg",
"1091220/images/image_12_compressed.jpg",
"1091220/images/image_2_compressed.jpg",
"1091220/images/image_3_compressed.jpg",
"1091220/images/image_4_compressed.jpg",
"1091220/ima... | [
"1091220/stls/A1.stl",
"1091220/stls/A2.stl",
"1091220/stls/A3.stl",
"1091220/stls/A4.stl",
"1091220/stls/B1.stl",
"1091220/stls/B2.stl",
"1091220/stls/B3.stl",
"1091220/stls/B4.stl",
"1091220/stls/C1.stl",
"1091220/stls/C2.stl",
"1091220/stls/C3.stl",
"1091220/stls/D1.stl",
"1091220/stls/D2... | CC-BY | https://www.printables.com/model/1091220 | data_0047.tar |
955884 | Salt-Shaker refill helper/Salzstreuer Nachfüllhilfe (+OpenSCAD Source) | <h3>Overview</h3><p>There's these salt-shakers that you can buy at the supermarket that everybody seems to have at home. They're very handy in the kitchen, but given the amount of salt they contain, they're quite expensive.</p><figure class="image"><img src="https://media.printables.com/media/prints/955884/rich_content... | [
"refill",
"funnel",
"salt",
"saltshaker",
"trichter",
"salzstreuer",
"nachfuellen",
"noai"
] | Household > Kitchen | [
"955884/images/image_1_compressed.jpg",
"955884/images/image_2_compressed.jpg",
"955884/images/image_3_compressed.jpg",
"955884/images/image_4_compressed.jpg",
"955884/images/image_5_compressed.jpg",
"955884/images/image_6_compressed.jpg",
"955884/images/image_7_compressed.jpg",
"955884/images/image_8... | [
"955884/stls/filler_helper.stl"
] | CC-BY | https://www.printables.com/model/955884 | data_0047.tar |
162045 | Samla Small Lid Clip - Stackable |
<p>I just changes the design of the clip a little bit so you can stack the boxes (on top of the clip) if you want. :)</p>
<p>You can see the difference on the 4th picture.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>RepRap</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<di... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"162045/images/image_1_compressed.jpg",
"162045/images/image_2_compressed.jpg",
"162045/images/image_3_compressed.jpg",
"162045/images/image_4_compressed.jpg",
"162045/images/image_5_compressed.jpg"
] | [
"162045/stls/Samla-Clip-v3-sNi.stl"
] | CC-BY | https://www.printables.com/model/162045 | data_0047.tar |
366766 | Samsung galaxy A52 5G phone case | <p>Bumper case for Samsung galaxy A52 5G with geometric cut-outs.<br>Approximate walls thicknes ~2.6mm.<br>All necessary holes (for usb socket, microphones, etc) arranged well, button tabs also.</p><p> </p><p>Print with TPU filament, layer height 0.15mm (first layer 0.2mm) and all print speeds set to 18-22 mm/s.</... | [
"case",
"geometric",
"samsung",
"flexible",
"tpu",
"phone",
"bumper",
"tpucase",
"a52"
] | Gadgets > Portable Devices | [
"366766/images/image_1_compressed.jpg",
"366766/images/image_2_compressed.jpg",
"366766/images/image_3_compressed.jpg",
"366766/images/image_4_compressed.jpg",
"366766/images/image_5_compressed.jpg",
"366766/images/image_6_compressed.jpg"
] | [
"366766/stls/a52_5G.stl"
] | CC-BY | https://www.printables.com/model/366766 | data_0047.tar |
1236716 | Samsung galaxy A56 phone case | <p>Print this in TPU.</p><p>I modeled this with help from reference images from the internet and fixed after testing on a real phone</p><p>UPDATE 1: I redid the placement and shape of holes on top and bottom, according to better reference images. I still did not test on real phone</p><p>UPDATE 2: fixed after testing on... | [
"samsung",
"galaxy",
"tpu",
"phone",
"phonecase",
"a56"
] | Gadgets > Portable Devices | [
"1236716/images/image_1_compressed.jpg",
"1236716/images/image_2_compressed.jpg"
] | [
"1236716/stls/samsung A56 case V1.3.stl"
] | CC-BY | https://www.printables.com/model/1236716 | data_0047.tar |
581915 | Samsung Galaxy Tab A7 Lite Case | <p>Case for the Galaxy A7 Lite, prints really nice, had to go through a few iterations to get the holes in the right spots.</p><p>Will print without supports</p><p>I used PLA Glitter Purple and made some holes to cut down on the amount of filament, solid file also uploaded so you can make your own style of cutout.</p><... | [
"samsung",
"samsunggalaxy",
"taba7lite"
] | Gadgets > Portable Devices | [
"581915/images/image_1_compressed.jpg",
"581915/images/image_2_compressed.jpg"
] | [
"581915/stls/A7_Case.stl",
"581915/stls/A7_Case_Solid.stl"
] | CC-BY | https://www.printables.com/model/581915 | data_0047.tar |
250293 | Samsung Galaxy Watch 4 46mm Charging Dock | <p>Designed to be fully printable with no/minimal supports needed. You can rotate the STL so that the overhang is getting the best cooling if needed, but supports would likely mar the bottom surface.</p><p>Fits a Galaxy Watch 4 Classic 46mm, but should also fit any other Galaxy Watch 3 or 4 with minimal tinkering. Desi... | [
"samsung",
"galaxy",
"dock",
"charging",
"watch"
] | Gadgets > Portable Devices | [
"250293/images/image_1_compressed.jpg",
"250293/images/image_2_compressed.jpg",
"250293/images/image_3_compressed.jpg",
"250293/images/image_4_compressed.jpg",
"250293/images/image_5_compressed.jpg"
] | [
"250293/stls/Galaxy_Watch4_Classic_Stand.stl"
] | CC-BY | https://www.printables.com/model/250293 | data_0047.tar |
321553 | Samsung S10 Case | <p><a href="https://www.thingiverse.com/thing:3563232">Samsung S10 Case by Christanoid - Thingiverse</a></p><p><a href="https://www.thingiverse.com/thing:3563232">https://www.thingiverse.com/thing:3563232</a></p><p> </p><p>*** Not mine just a link to the creator of this amazing case which we cannot find on printab... | [
"case",
"samsung",
"s10",
"phonecase",
"samsungs10"
] | Gadgets > Portable Devices | [
"321553/images/image_1_compressed.jpg",
"321553/images/image_2_compressed.jpg",
"321553/images/image_3_compressed.jpg",
"321553/images/image_4_compressed.jpg",
"321553/images/image_5_compressed.jpg",
"321553/images/image_6_compressed.jpg",
"321553/images/image_7_compressed.jpg"
] | [
"321553/stls/s10_Case.stl",
"321553/stls/S10_Case_V3.stl"
] | CC-BY | https://www.printables.com/model/321553 | data_0047.tar |
34406 | Samsung Smartthings hub 3 wall holder | [] | Gadgets > Other Gadgets | [
"34406/images/image_1_compressed.jpg"
] | [
"34406/stls/SmartThings Hub v3 mount.stl"
] | CC0 | https://www.printables.com/model/34406 | data_0047.tar | |
55787 | Samsung Soundbar Feet | <p>I quickly drew these up to raise my sound bar above my desk so wires can run under it.</p>
<h3>Print instructions</h3><p>Print it on its side. No supports and I didn't need a brim on my Mini+ with a smooth steel sheet. I also made it ~50% thick to speed up printing time. But scale it however big you need.</p> | [
"samsung",
"feet",
"soundbar"
] | Household > Living Room | [
"55787/images/image_1_compressed.jpg"
] | [
"55787/stls/samsung-sound-bar-feet-v1.stl"
] | GPL3.0 | https://www.printables.com/model/55787 | data_0047.tar |
519537 | SAMSUNG T5 SSD Dock | <p>The SAMSUNG T5 has blazing fast transfer speeds.
<a href="https://www.amazon.co.uk/s?k=samsung+t5+portable+ssd&ref=nb_sb_noss_1">https://www.amazon.co.uk/s?k=samsung+t5+portable+ssd&ref=nb_sb_noss_1</a></p>
<p>Had to install a USB-C PCIe card in my aging motherboard but now i am transferring files from my i... | [
"mount",
"dock",
"ssd",
"portable",
"thingiverse"
] | Gadgets > Computers | [
"519537/images/image_1_compressed.jpg",
"519537/images/image_10_compressed.jpg",
"519537/images/image_11_compressed.jpg",
"519537/images/image_12_compressed.jpg",
"519537/images/image_13_compressed.jpg",
"519537/images/image_2_compressed.jpg",
"519537/images/image_3_compressed.jpg",
"519537/images/ima... | [
"519537/stls/Clip_Slim_Plug.stl",
"519537/stls/Clip_Thiccc_Plug.stl",
"519537/stls/Dock.stl"
] | CC-BY | https://www.printables.com/model/519537 | data_0047.tar |
433451 | Samsung T7 SSD case | <p>Minimalistic protective case for Samsung t7 SSD.</p><p>Printed with flex filament.</p><p>Approximately 6g of filament per one part.</p><p>Parameters:</p><ul><li>speed: 30 mm/s</li><li>nozzle temperature: 250</li><li>bed temperature: 35</li><li>infil - 15%</li><li>perimeters: 2</li><li>layer hight: 0.15 mm</li><li>wa... | [
"samsung",
"flex"
] | Gadgets > Portable Devices | [
"433451/images/image_1_compressed.jpg"
] | [
"433451/stls/t7_case.stl"
] | CC-BY | https://www.printables.com/model/433451 | data_0047.tar |
782331 | Samsung USB Type C Stick cover/cap | <p>If you need a replacement for your Samsung USB C Flash drive in my case the MUF-64DA you are in the right place!</p><p>I printed it with my Neptune 4 Pro and used cura as slicer with this settings: PLA, 0.12mm layers and 2 walls.</p><p>For me printed just right and fit perfectly inside my stick, if you can't you cou... | [
"cap",
"samsung",
"usb",
"usbstick"
] | Gadgets > Other Gadgets | [
"782331/images/image_1_compressed.jpg",
"782331/images/image_2_compressed.jpg",
"782331/images/image_3_compressed.jpg"
] | [
"782331/stls/Samsung USB C Stick Cap with hole.stl",
"782331/stls/Samsung USB C Stick Cap.stl"
] | CC-BY | https://www.printables.com/model/782331 | data_0047.tar |
316094 | San Jamar Toilet Paper Key (fully customizable) | <p>This is a key for a San Jamar toilet paper holder. Part is fully customizable is Fusion360.</p>Category: Bathroom | [
"fusion360",
"customizable",
"key",
"toiletpaper",
"thingiverse",
"autodeskfusion360",
"madewithfusion360",
"sanjamar"
] | Household > Bathroom | [
"316094/images/image_1_compressed.jpg",
"316094/images/image_2_compressed.jpg"
] | [
"316094/stls/san_jamar_key_v5.stl"
] | CC-BY | https://www.printables.com/model/316094 | data_0047.tar |
540237 | Sand Brick Mold | <p>An easy use brick mold to make walls out of moist sand. <br><br>This print doesn't require supports.</p><p>How to use: <br>-Place inner plate inside the outer section of the mold.<br>-Pill with sand until firmly filled. <br>-Place mold in final location or on a flat surface<br>-Lift off the red outer ... | [
"beach",
"sandcastle"
] | Seasonal designs > Summer | [
"540237/images/image_1_compressed.jpg"
] | [
"540237/stls/Brick_Mould_Inner.stl",
"540237/stls/Brick_Mould_Outer.stl"
] | CC0 | https://www.printables.com/model/540237 | data_0047.tar |
1233211 | Sand Castle | <p>I originally designed it to be a sand castle, but it can be a miniature castle if you use a different color. I used a 0.8mm nozzle and thick layer lines since it's a big print. It doesn't need much infill either.</p> | [
"castle",
"sandcastle"
] | Art & Design > Sculptures | [
"1233211/images/image_1_compressed.jpg",
"1233211/images/image_2_compressed.jpg"
] | [
"1233211/stls/Sand Castle.stl"
] | CC-BY | https://www.printables.com/model/1233211 | data_0047.tar |
301586 | Sandevistan From Cyberpunk Edgerunners | <p>My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the parts are separated to allow for fabric and strapping to be put on them and ther... | [
"thingiverse"
] | Costumes & Accessories > Props | [
"301586/images/image_1_compressed.jpg",
"301586/images/image_10_compressed.jpg",
"301586/images/image_2_compressed.jpg",
"301586/images/image_3_compressed.jpg",
"301586/images/image_4_compressed.jpg",
"301586/images/image_5_compressed.jpg",
"301586/images/image_6_compressed.jpg",
"301586/images/image_... | [
"301586/stls/sandevistan_1.stl",
"301586/stls/sandevistan_2.stl",
"301586/stls/sandevistan_3.stl",
"301586/stls/sandevistan_4.stl",
"301586/stls/sandevistan_5.stl",
"301586/stls/sandevistan_6.stl",
"301586/stls/sandevistan_7.stl"
] | CC-BY | https://www.printables.com/model/301586 | data_0047.tar |
18066 | Sanding Pads | <p>Tired of sanding dowels, round stock, profiles and corners? I hope that with this Thing your life will be easier.<br/>
Those are just simple sanding pads/blocks. Wrap some sanding paper around and start sanding.<br/>
There are three types in different dimensions: for round stock(inner and outer) and for corners.<b... | [
"sanding",
"pads",
"thingiverse",
"sandingtool",
"sandingblock",
"medyk3d",
"sandingpaper"
] | Hobby & Makers > Tools | [
"18066/images/image_1_compressed.jpg",
"18066/images/image_2_compressed.jpg",
"18066/images/image_3_compressed.jpg",
"18066/images/image_4_compressed.jpg",
"18066/images/image_5_compressed.jpg",
"18066/images/image_6_compressed.jpg",
"18066/images/image_7_compressed.jpg",
"18066/images/image_8_compres... | [
"18066/stls/padacute50deg.stl",
"18066/stls/padacute50deg_18066.stl",
"18066/stls/padacute60deg.stl",
"18066/stls/padacute60deg_18066.stl",
"18066/stls/padacute70deg.stl",
"18066/stls/padacute70deg_18066.stl",
"18066/stls/padacute80deg.stl",
"18066/stls/padacute80deg_18066.stl",
"18066/stls/padacute... | CC-BY | https://www.printables.com/model/18066 | data_0047.tar |
234158 | Sanding Stick |
<p>I was having some problems sanding some stuff.. and my normal files and sandpaper wouldn't reach the smal crevises.. so after asking some help and info at the amazing roup of proptarts (<a href="https://www.facebook.com/groups/theproptarts">https://www.facebook.com/groups/theproptarts</a>), i decided to desing my... | [
"sanding",
"stick",
"sand",
"thingiverse",
"sandingtool",
"sandingtools",
"sandingsticks"
] | Hobby & Makers > Tools | [
"234158/images/image_1_compressed.jpg",
"234158/images/image_2_compressed.jpg",
"234158/images/image_3_compressed.jpg",
"234158/images/image_4_compressed.jpg",
"234158/images/image_5_compressed.jpg",
"234158/images/image_6_compressed.jpg",
"234158/images/image_7_compressed.jpg",
"234158/images/image_8... | [
"234158/stls/sanding_stick.stl"
] | CC-BY | https://www.printables.com/model/234158 | data_0047.tar |
73695 | Sandpaper disc magazine 🪚 | <p>🟨 Material: <a href="https://shop.prusa3d.com/cs/prusament/1345-prusament-petg-mango-yellow-1kg.html">Prusament Mango Yellow PETG</a> it looks like a 🐝 DeWALT yellow </p><p>⬛️ Layer: 0.3 is enough</p> | [
"diy",
"dewalt",
"workshop",
"sandpaper",
"utility",
"sandpaperholder",
"grindingwheel"
] | Hobby & Makers > Tools | [
"73695/images/image_1_compressed.jpg",
"73695/images/image_2_compressed.jpg"
] | [
"73695/stls/sandpaper_holder.stl"
] | CC0 | https://www.printables.com/model/73695 | data_0047.tar |
210974 | Sandshovel for Kids - Version 3 | <p>Tried for the children of a friend to construct a sand-shovel - V1 was nice, but I think this one is even better - 4 Walls, PLA and PETG are sturdy enough for long play in the sand :) - no supports needed, infill gyroid, 15% and it is really kid-proof.</p> | [
"shovel",
"kidstoy",
"sandtoy"
] | Toys & Games > Outdoor Toys | [
"210974/images/image_1_compressed.jpg",
"210974/images/image_2_compressed.jpg",
"210974/images/image_3_compressed.jpg"
] | [
"210974/stls/shovelno3.stl",
"210974/stls/shovelno3chamfer.3mf.stl"
] | CC-BY | https://www.printables.com/model/210974 | data_0047.tar |
1037123 | Sanitary pads dispenser | <p>I design this model for my girlfriend</p><p>She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. </p><p>The cap snap in the box, i have print both of them in PLA</p><p>I have pretty big hand but the hole is well enough for my figger to get a pad, so it should be ok ... | [
"organizer",
"bathroom",
"pads",
"dispenser",
"bathroomorganizer",
"sanitarypads",
"hider"
] | Household > Bathroom | [
"1037123/images/image_1_compressed.jpg",
"1037123/images/image_2_compressed.jpg",
"1037123/images/image_3_compressed.jpg",
"1037123/images/image_4_compressed.jpg"
] | [
"1037123/stls/AM001_101_B.stl",
"1037123/stls/AM001_102_B.stl"
] | CC-BY | https://www.printables.com/model/1037123 | data_0047.tar |
882341 | Sanrio Cookie Cutter Set - Hello Kitty - My Melody - Kuromi - Badtz-Maru | <p>Sanrio Cookie Cutter Set - Hello Kitty - My Melody - Kuromi - Badtz-Maru</p><p>The cookie cutter is around 75mm</p><p>Its a 2 piece item, one for cutting the cookie dough and one for modeling .</p><p>Print with 100% infill</p> | [
"cookie",
"cutter",
"cookiecutter",
"kitty",
"hellokitty",
"melody",
"my",
"badtzmaru",
"sanrio",
"mymelody",
"kuromi"
] | Household > Kitchen | [
"882341/images/image_1_compressed.jpg",
"882341/images/image_2_compressed.jpg",
"882341/images/image_3_compressed.jpg",
"882341/images/image_4_compressed.jpg",
"882341/images/image_5_compressed.jpg"
] | [
"882341/stls/badtz-(1).stl",
"882341/stls/badtz.stl",
"882341/stls/HelloKitty-(1).stl",
"882341/stls/HelloKitty-.stl",
"882341/stls/Kuromi-(1).stl",
"882341/stls/Kuromi-.stl",
"882341/stls/Mymelody-(1).stl",
"882341/stls/Mymelody-.stl"
] | CC-BY | https://www.printables.com/model/882341 | data_0047.tar |
327591 | Santa Creeper Minecraft Christmas Decoration | <p>Santa Creeper Minecraft Christmas Decoration</p> | [
"game",
"minecraft",
"computer",
"creeper",
"christmasdecoration",
"minecraftcreeper"
] | Toys & Games > Other Toys & Games | [
"327591/images/image_1_compressed.jpg",
"327591/images/image_2_compressed.jpg",
"327591/images/image_3_compressed.jpg"
] | [
"327591/stls/creeper_3d_santa-head-x.stl",
"327591/stls/cripper-poprawiony.stl",
"327591/stls/cripper_repair-stl.stl"
] | GPL2.0 | https://www.printables.com/model/327591 | data_0047.tar |
1095653 | Santa Sleigh | <p>santa? hohoho i made this into a name plaque for my little cousin but do what ever</p> | [] | Art & Design > Sculptures | [
"1095653/images/image_1_compressed.jpg"
] | [
"1095653/stls/santa sleigh.stl"
] | CC0 | https://www.printables.com/model/1095653 | data_0047.tar |
1162591 | Sanwa Snap-in Arcade Button Remover (30mm & 24mm) | <h3>Introduction</h3><p><br>Simple stuff. Push it flush with the panel to push the snap-in clips, and you can use a finger to push the button out. I made one in both 30mm and 24mm. Makes my life just a little easier.</p><p>Works for Sanwas--can't confirm with other button types.</p><h3>Printing Sugges... | [
"arcade",
"button",
"obsf30",
"sanwa",
"obsf24"
] | Gadgets > Video Games | [
"1162591/images/image_1_compressed.jpg"
] | [
"1162591/stls/24MM.stl",
"1162591/stls/30MM.stl"
] | CC-BY | https://www.printables.com/model/1162591 | data_0047.tar |
1233113 | Satisfying Hexagon Fidget Toy | <p>This is the trippy but super satisfying hexagon fidget toy! it prints in place with no support and will blow your mind!</p><p>We printed it ourselves on Youtube:</p><figure class="media"><oembed url="https://www.youtube.com/shorts/jX405cYQgTk"></oembed></figure> | [
"hexagon",
"fidget",
"fidgettoy",
"hexagonfidget",
"hexagontoy"
] | Toys & Games > Puzzles & Brain-teasers | [
"1233113/images/image_1_compressed.jpg",
"1233113/images/image_2_compressed.jpg",
"1233113/images/image_3_compressed.jpg",
"1233113/images/image_4_compressed.jpg",
"1233113/images/image_5_compressed.jpg",
"1233113/images/image_6_compressed.jpg",
"1233113/images/image_7_compressed.jpg"
] | [
"1233113/stls/Hexagon Fidget Toy.stl"
] | CC-BY | https://www.printables.com/model/1233113 | data_0047.tar |
358415 | Satsana 5015 + CR-Touch | <p>Este archivo es un reajuste al original que encontré en internet, puede usarse tanto para BLTouch o para CR-touch, yo lo tengo montado en dos de mis Ender 3 Normal.</p><p>datos adicionales:</p><p>offset is x= -53 y= -15</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"358415/images/image_1_compressed.jpg"
] | [
"358415/stls/Satsana 5015 Cable Cap.stl",
"358415/stls/Satsana 5015 CR-Touch.stl"
] | CC-BY | https://www.printables.com/model/358415 | data_0047.tar |
188065 | Satsana 5015 Ender 3 for Phaetus BMS with EZABL Mount | <p>I remixed the great <a href="https://www.thingiverse.com/thing:4712482">Satsana 5015</a> Ender 3 V2 for Phaetus BMS Hotend or similiar part to work on an original Ender 3/Pro and added an EZABL mount.</p>
<p>Print it with the side that mounts to the carriage down on the bed and use supports only under the bottom sid... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"188065/images/image_1_compressed.jpg",
"188065/images/image_2_compressed.jpg",
"188065/images/image_3_compressed.jpg",
"188065/images/image_4_compressed.jpg"
] | [
"188065/stls/Satsana_5015_Ender_3_with_EZABL_for_Phaetus_BMS_Hotend.stl",
"188065/stls/Satsana_5015_Ender_3_with_EZABL_for_Phaetus_BMS_Hotend_Cable_Cap.stl"
] | CC-BY | https://www.printables.com/model/188065 | data_0047.tar |
241529 | Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount) | <p>This is a Satsana fan duct for the Ender 3/Ender 3 v2 printer with a MicroSwiss direct drive installed. This allows for usage of the Cr-Touch without a printed part, you'll need to use the ender 3 cr touch mount bracket and screw through the fan duct.</p><p>Printed with PETG at .20mm</p><p> </p> | [
"ender",
"directdrive",
"microswiss",
"ender3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"241529/images/image_1_compressed.jpg",
"241529/images/image_2_compressed.jpg"
] | [
"241529/stls/Satsana Microswiss Duct.stl"
] | CC0 | https://www.printables.com/model/241529 | data_0047.tar |
696095 | Satsana Ender 3 V2 4010/4020 + 5015 Fan Duct with BLTouch | <h4><strong>Print Settings</strong></h4><ul><li>Printer brand:</li></ul><p>Creality</p><ul><li>Printer:</li></ul><p>Ender 3</p><ul><li>Rafts:</li></ul><p>No</p><ul><li>Supports:</li></ul><p>Yes</p><ul><li>Resolution:</li></ul><p>0.2</p><ul><li>Infill:</li></ul><p>15% Gyroid</p><ul><li>Filament brand:</li></ul><p>ICE Fi... | [
"assembly",
"support",
"easytoprint",
"ender3v2",
"satsana5015bltouch",
"satsana",
"satsana5015"
] | 3D Printers > Creality Parts & Upgrades | [
"696095/images/image_1_compressed.jpg",
"696095/images/image_2_compressed.jpg"
] | [
"696095/stls/Satsana_4020_5015_BLTouch.stl"
] | CC-BY | https://www.printables.com/model/696095 | data_0047.tar |
287504 | Satsana Fan Duct Remix for Micro Swiss Direct Drive Extruder - CR-10 & Ender 3 Printers + CR Touch | <p>I modified the arm for the BL Touch to match up with the cable for a CR Touch and removed the access hole for changing the BL Touch probe since the CR Touch does not have a replaceable probe. I am using this on an Ender 3 v2.</p><p>I suggest using supports that touch build plate only when printing. There are two ver... | [] | 3D Printers > Creality Parts & Upgrades | [
"287504/images/image_1_compressed.jpg",
"287504/images/image_2_compressed.jpg",
"287504/images/image_3_compressed.jpg",
"287504/images/image_4_compressed.jpg"
] | [
"287504/stls/E3v2+CR10 MSDD Fan Shroud - Satsana Remix - Final Version (With Additional CR Touch Support).stl",
"287504/stls/E3v2+CR10 MSDD Fan Shroud - Satsana Remix - Final Version.stl"
] | CC-BY | https://www.printables.com/model/287504 | data_0047.tar |
190658 | Satsana Fan Mount Ender 3v2 with 5015 Fan Channel |
<p>Update-- added fan guard. use 2 23-25mm m3 screws to secure. Make sure to either drill out or tap the holes in the fan guard, and tap the holes in the fan duct for a proper fit.</p>
<p>Remixed version of <a href="https://www.thingiverse.com/thing:4647053">https://www.thingiverse.com/thing:4647053</a> by scrath, w... | [
"fanduct",
"thingiverse",
"5015fanduct",
"ender3v2",
"satsana"
] | 3D Printers > Accessories | [
"190658/images/image_1_compressed.jpg",
"190658/images/image_2_compressed.jpg",
"190658/images/image_3_compressed.jpg"
] | [
"190658/stls/Satsana_fan_guard.stl",
"190658/stls/Satsana_Fan_Mount_Ender_3v2_with_Fan_Channel.stl"
] | CC-BY | https://www.printables.com/model/190658 | data_0047.tar |
305683 | Saturn 2 Vat Holder | <p>This is to rest the Saturn 2 vat that will protect the FEP. This makes it easy to clean or just get out of the way.</p><p> </p><p>There are two versions - fancy and simple. The fancy has some raised corners to hold the vat a little better. </p> | [
"saturn",
"vat",
"fep",
"elegoo",
"elegoosaturn",
"saturn2",
"elegoosaturn2"
] | 3D Printers > Accessories | [
"305683/images/image_1_compressed.jpg",
"305683/images/image_2_compressed.jpg",
"305683/images/image_3_compressed.jpg"
] | [
"305683/stls/Saturn 2 Vat Holder - Fancy.stl",
"305683/stls/Saturn 2 Vat Holder - Simple.stl"
] | CC-BY | https://www.printables.com/model/305683 | data_0047.tar |
82513 | Saturn V Rocket |
<p>I was looking around when I stumbled upon several models on the NASA website available for download. I was looking for something else, but I thought it would be good to upload these here. Let me make it clear that I DID NOT DESIGN THESE MODELS! I simply uploaded them here to allow them to be found easier, as Thingi... | [
"thingiverse"
] | Toys & Games > Vehicles | [
"82513/images/image_1_compressed.jpg",
"82513/images/image_10_compressed.jpg",
"82513/images/image_11_compressed.jpg",
"82513/images/image_12_compressed.jpg",
"82513/images/image_2_compressed.jpg",
"82513/images/image_3_compressed.jpg",
"82513/images/image_4_compressed.jpg",
"82513/images/image_5_comp... | [
"82513/stls/command_moduel[1.stl",
"82513/stls/escape_tower[1.stl",
"82513/stls/fin_print_4[1.stl",
"82513/stls/lem_shroud[1.stl",
"82513/stls/S-IC_bottom[1.stl",
"82513/stls/S-IC_joining_cube[1.stl",
"82513/stls/S-IC_top[1.stl",
"82513/stls/S-II[1.stl",
"82513/stls/S-IV_b[1.stl",
"82513/stls/serv... | CC0 | https://www.printables.com/model/82513 | data_0047.tar |
581671 | Saw and thin tool holder with French cleat backer | <p>Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue.</p><p>Cam lobe tires work great printed with TPU for friction, but a version with the cam lobe in full is also attached (may need some electrical tape o... | [] | Hobby & Makers > Organizers | [
"581671/images/image_1_compressed.jpg"
] | [
"581671/stls/axle cap.stl",
"581671/stls/base unit.stl",
"581671/stls/bottom cleat attachment.stl",
"581671/stls/cam lobe combined.stl",
"581671/stls/cam lobe inner.stl",
"581671/stls/cam lobe outer tire.stl",
"581671/stls/end cap.stl",
"581671/stls/top cleat attachent.stl"
] | CC-BY | https://www.printables.com/model/581671 | data_0047.tar |
979377 | Scalpel cover | <p>Layer - 0.2mm<br>Material - PLA<br>No support<br> </p> | [
"cover",
"scalpel",
"krytka",
"kryt",
"skalpel",
"scalpelcover"
] | Hobby & Makers > Tools | [
"979377/images/image_1_compressed.jpg",
"979377/images/image_2_compressed.jpg"
] | [
"979377/stls/scalpel cover.stl"
] | CC0 | https://www.printables.com/model/979377 | data_0047.tar |
79372 | Scalpel Holder | <p>Holder for a scalpel, modelled off a #4 stainless steel holder.</p><p>Untested; exercise <i>extreme caution</i> when using this. It may break while being used.</p><p>Category: Biology</p> | [
"thingiverse",
"scalpelhandle"
] | Learning > Chemistry & Biology | [
"79372/images/image_1_compressed.jpg",
"79372/images/image_2_compressed.jpg",
"79372/images/image_3_compressed.jpg",
"79372/images/image_4_compressed.jpg"
] | [
"79372/stls/scalpel_holder.stl",
"79372/stls/scalpel_holder_10.stl"
] | CC-BY | https://www.printables.com/model/79372 | data_0047.tar |
761504 | Scalpel / Skalpell Box | <p>A scalpel box that can hold up to 2 scalpels (No. 4) and spare blades.</p><p>Printed with PLA and PETG with 0.2mm layer height and 0.4mm nozzle.</p><p>The lid edges must be cleaned a little bit after printing so it fits perfectly into the box :)</p><p> </p><p>09.02.2025</p><p>---------------</p><p>Added a new b... | [] | Hobby & Makers > Tools | [
"761504/images/image_1_compressed.jpg",
"761504/images/image_2_compressed.jpg"
] | [
"761504/stls/Box_Plain.stl",
"761504/stls/Box_Plain_v2.stl",
"761504/stls/Lid_Plain.stl"
] | CC0 | https://www.printables.com/model/761504 | data_0047.tar |
708686 | Scarf and Collar for Posable Penguin Fidget | <p>A scarf and collar to keep your posable penguin fidgets warm.</p><p><a href="https://www.printables.com/model/660867">Download the base model here</a><br> </p><figure class="media"><oembed url="https://youtu.be/QvqppWoIySs"></oembed></figure><p><a href="https://youtu.be/QvqppWoIySs">https://youtu.be/QvqppWoIySs... | [
"penguin",
"posable",
"3dprinty"
] | Toys & Games > Other Toys & Games | [
"708686/images/image_1_compressed.jpg"
] | [
"708686/stls/Collar.stl",
"708686/stls/Demo - Assembled.stl",
"708686/stls/Scarf.stl"
] | CC-BY | https://www.printables.com/model/708686 | data_0047.tar |
894269 | Scarf Hanger | <p>I made a hanger for my scarf that I just bought and couldn't hang nicely on a regular hanger. Fits on 180mm x 180mm Printers</p> | [
"hanger",
"fashion",
"organization",
"scarf",
"coathanger",
"fashionaccessories"
] | Fashion > Other Fashion Accessories | [
"894269/images/image_1_compressed.jpg",
"894269/images/image_2_compressed.jpg",
"894269/images/image_3_compressed.jpg"
] | [
"894269/stls/scarf hanger.stl"
] | CC-BY | https://www.printables.com/model/894269 | data_0047.tar |
868306 | SCART Dust Cover | <p>A simple dust cover for SCART sockets. The plug in the standard model stands about 2mm taller than an actual plug, to allow the base to stick out for easy removal. The short model is 4mm shorter, which should allow it to sit flush with the socket's surface.</p><p>Print in PLA or TPU. If printing in TPU, you may wish... | [
"rgb",
"ossc",
"retrotink",
"scart",
"jp21"
] | Gadgets > Video Games | [
"868306/images/image_1_compressed.jpg",
"868306/images/image_2_compressed.jpg"
] | [
"868306/stls/SCART-Dust-Cover-Short.stl",
"868306/stls/SCART-Dust-Cover.stl"
] | CC0 | https://www.printables.com/model/868306 | data_0047.tar |
115940 | Schale | [
"bowl",
"tray",
"schale",
"ablage"
] | Household > Home Decor | [
"115940/images/image_1_compressed.jpg",
"115940/images/image_2_compressed.jpg",
"115940/images/image_3_compressed.jpg"
] | [
"115940/stls/21-301Bowl1.stl",
"115940/stls/21-301Bowl150.stl",
"115940/stls/21-301Bowl2.stl",
"115940/stls/21-301Bowl3.stl"
] | CC0 | https://www.printables.com/model/115940 | data_0047.tar | |
120396 | Scharnier Kette chain bracelet | [
"link",
"chain",
"bracelet",
"linked",
"links",
"scharnier",
"kette",
"chainlinks",
"kettenglied"
] | Hobby & Makers > Other Ideas | [
"120396/images/image_1_compressed.jpg",
"120396/images/image_2_compressed.jpg",
"120396/images/image_3_compressed.jpg",
"120396/images/image_4_compressed.jpg",
"120396/images/image_5_compressed.jpg",
"120396/images/image_6_compressed.jpg"
] | [
"120396/stls/022Scharnier.stl",
"120396/stls/022Scharnier150.stl",
"120396/stls/22-159Scharnier100-catch.stl",
"120396/stls/22-159Scharnier160-catch.stl",
"120396/stls/22-159Scharnier183-catch.stl",
"120396/stls/22-159Scharnier194-catch.stl",
"120396/stls/22-159Scharnier20-catch.stl",
"120396/stls/22-... | CC0 | https://www.printables.com/model/120396 | data_0047.tar | |
361781 | Schlaubi Schlumpf Brainy Smurf Glasses Holder | <p>Schlaubi Schlumpf Brainy Smurf Glasses Holder</p><p>If you like it --> press like it :-)</p><p>Remix of this model <a href="https://www.thingiverse.com/thing:3058136">https://www.thingiverse.com/thing:3058136</a> which was designed by <a href="https://www.thingiverse.com/Sangallo_Designs">Sangallo_Designs</a>.</p... | [
"holder",
"glasses",
"smurf",
"schlumpf",
"brainy"
] | Household > Other House Equipment | [
"361781/images/image_1_compressed.jpg"
] | [
"361781/stls/Smurf_connector.stl",
"361781/stls/Smurf_face.stl",
"361781/stls/Smurf_glasses.stl",
"361781/stls/Smurf_glasses_holder.stl",
"361781/stls/Smurf_hat.stl"
] | CC-BY | https://www.printables.com/model/361781 | data_0047.tar |
853927 | Schleifklotz / Schleifpapierhalter / Sandpaper holder | <p>Ich habe hier einen Schleifpapierhalter für meine Baustelle konstruiert.</p><p>Die obere Klemmplatte besitzt Noppen, welche sich durch das Schleifpapier bohren, welche den halt nochmals verbessern.</p><p>Die Schrauben habe ich als Rändelschrauben gezeichnet für besseren Grip.</p><p>Schleifpapier 115mm</p><p>________... | [
"sandpaper",
"sandpaperholder",
"schleifen",
"schleifpapier",
"schleifklotz"
] | Hobby & Makers > Tools | [
"853927/images/image_1_compressed.jpg",
"853927/images/image_2_compressed.jpg",
"853927/images/image_3_compressed.jpg",
"853927/images/image_4_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/853927 | data_0047.tar |
521715 | Schlüsselanhänger herz | Schlüsselanhänger in Herzform | Download free 3D printable STL models | [
"herzanhaenger"
] | Fashion > Other Fashion Accessories | [
"521715/images/image_1_compressed.jpg"
] | [
"521715/stls/Herz.stl"
] | CC0 | https://www.printables.com/model/521715 | data_0047.tar |
131464 | Schmoo Transfer Adaptor for plastic schmoo pump bottles | <p>I designed this adaptor so I could transfer the last bit out of pump bottles into the next one. I hate throwing away the product that the pumps won't reach. This one fits most bottles that have a approximately 25 mm neck which is common for products that come with a pump like lotion and hand sanitizer.</p><p>The inc... | [
"bottle",
"threaded",
"schmoo"
] | Household > Other House Equipment | [
"131464/images/image_1_compressed.jpg",
"131464/images/image_2_compressed.jpg",
"131464/images/image_3_compressed.jpg"
] | [
"131464/stls/Schmoo Transfer Adaptor v2.stl",
"131464/stls/Schmoo Transfer Adaptor v3.stl"
] | CC-BY | https://www.printables.com/model/131464 | data_0047.tar |
496152 | School Desk / Schultisch (Playmobil kompatibel) | <h3><i>English</i></h3><p>A school desk in Playmobil style.</p><h3> </h3><h3>Printing guide</h3><p>Printable without supports with default settings. My own settings are visible in the project file (3 tables were printed in the project).</p><p>The project file is ment as an example.</p><p> </p><h3><i>Deutsch</... | [
"school",
"bank",
"playmobil",
"tisch",
"schulbank",
"schooldesk"
] | Toys & Games > Other Toys & Games | [
"496152/images/image_1_compressed.jpg",
"496152/images/image_2_compressed.jpg",
"496152/images/image_3_compressed.jpg"
] | [
"496152/stls/Schulbank-Kinder.stl"
] | CC-BY | https://www.printables.com/model/496152 | data_0047.tar |
51867 | School Paint Organizer | <p>Kids love to paint, and when they paint, the need a little squirt of each color. The kids in the school love these little ten pot paint organizers.</p>
<p>Your little ones will love them too.</p>
<p>When the day is done, it's easy clean up in the dish washer because they're printed in PETG.</p>
<h3>Print instructio... | [
"organizer",
"children",
"paint"
] | Learning > Other 3D Objects for Learning | [
"51867/images/image_1_compressed.jpg",
"51867/images/image_2_compressed.jpg"
] | [
"51867/stls/school paint tray 6.stl",
"51867/stls/school-paint-tray-4.stl"
] | CC-BY | https://www.printables.com/model/51867 | data_0047.tar |
1210575 | Schuko / CEE7 Dust Cover | <h3>TL;DR</h3><p>This OpenSCAD model generates 3D printable dust and dirt protection covers for CEE7/Schuko power outlets. Available in four shapes—round, square, hexagon, and octagon—the design is fully customizable for FDM 3D printing. Perfect for protecting unused outlets in workshops, garages, or outdoor environmen... | [
"diy",
"power",
"workshop",
"protection",
"dust",
"powersupply"
] | Household > Other House Equipment | [
"1210575/images/image_1_compressed.jpg",
"1210575/images/image_2_compressed.jpg",
"1210575/images/image_3_compressed.jpg",
"1210575/images/image_4_compressed.jpg",
"1210575/images/image_5_compressed.jpg",
"1210575/images/image_6_compressed.jpg"
] | [
"1210575/stls/PS cee7-circle.stl",
"1210575/stls/PS cee7-hexagon.stl",
"1210575/stls/PS cee7-octagon.stl",
"1210575/stls/PS cee7-square.stl"
] | GPL3.0 | https://www.printables.com/model/1210575 | data_0047.tar |
539150 | scoop for food pet dog cat | <p>Need a scoop to serve up dry dog food.</p>
<p>I used paint on supports for the inside of the handle but it might get away without.</p>
<p>Increased the wall thickness to 3 and 15% infill. Feels sturdy.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer... | [
"household",
"food",
"scoop",
"thingiverse",
"kitchentool",
"petfood",
"foodscoop",
"dogfoodscoop",
"flourscoop",
"catscoop"
] | Household > Pets | [
"539150/images/image_1_compressed.jpg",
"539150/images/image_2_compressed.jpg",
"539150/images/image_3_compressed.jpg",
"539150/images/image_4_compressed.jpg",
"539150/images/image_5_compressed.jpg"
] | [
"539150/stls/ScoopV2.stl"
] | CC-BY | https://www.printables.com/model/539150 | data_0047.tar |
327242 | SCOUT Boardgame |
<p>A simple insert for the SCOUT board game from OINK games, Source is available here <a href="https://github.com/fzerorubigd/scout-oink">https://github.com/fzerorubigd/scout-oink</a></p>
Category: Hobby
| [
"scout",
"boardgame",
"thingiverse",
"boardgameinserts"
] | Hobby & Makers > Other Ideas | [
"327242/images/image_1_compressed.jpg",
"327242/images/image_2_compressed.jpg",
"327242/images/image_3_compressed.jpg"
] | [
"327242/stls/scout-box.stl"
] | CC-BY | https://www.printables.com/model/327242 | data_0047.tar |
259444 | Scraper and Tweezers-Bracket for Ender 3 S1 | <p>No mounting hardware required - simple 'plug&play'</p><p>I printed mine in PLA with 20% infill, 0,2mm resolution and 0,4mm line width - no supports needed.</p> | [
"scraper",
"tweezer",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"259444/images/image_1_compressed.jpg"
] | [
"259444/stls/tool_holder_S1.stl"
] | CC-BY | https://www.printables.com/model/259444 | data_0047.tar |
660421 | Scraper Dacia mount fuel filler cap | <p>Window scraper, it can be mounted on the fuel filler flap of Dacia Duster mk1 2009-2017. Additionally, I provide a version of the scraper without a handle.</p><p>Scraper Dacia - Mount handle: model with a handle for mounting on the flap.</p><p>Mk2 - Upgraded version fits better, less prone to damage</p><p>Scraper Da... | [
"mount",
"scraper",
"dacia"
] | Hobby & Makers > Automotive | [
"660421/images/image_1_compressed.jpg",
"660421/images/image_2_compressed.jpg",
"660421/images/image_3_compressed.jpg",
"660421/images/image_4_compressed.jpg"
] | [
"660421/stls/Scraper Dacia mound mk2.stl",
"660421/stls/Scraper Dacia.stl"
] | CC0 | https://www.printables.com/model/660421 | data_0047.tar |
483072 | Scraper to clean the BBQ | <p>A scraper to clean your bbq. Print a bunch to have on hand.</p> | [
"bbq",
"weber",
"bbqgrill"
] | Household > Kitchen | [
"483072/images/image_1_compressed.jpg"
] | [
"483072/stls/bbq scraper 6in.stl",
"483072/stls/bbq scraper.stl"
] | CC0 | https://www.printables.com/model/483072 | data_0047.tar |
1186145 | Scraper with replaceable blades | <p>For assembly, you need 2x M3x4 mm bolts and 2x M3 nuts.<br>Printing without supports</p> | [
"holder",
"3dprinter",
"razorblade",
"scarper"
] | 3D Printers > Accessories | [
"1186145/images/image_1_compressed.jpg",
"1186145/images/image_2_compressed.jpg",
"1186145/images/image_3_compressed.jpg",
"1186145/images/image_4_compressed.jpg",
"1186145/images/image_5_compressed.jpg",
"1186145/images/image_6_compressed.jpg",
"1186145/images/image_7_compressed.jpg",
"1186145/images... | [
"1186145/stls/Scraper with replaceable blades for a 3D printer.stl"
] | CC-BY | https://www.printables.com/model/1186145 | data_0047.tar |
1208740 | Scraper – All Versions: Effortless 3D Print Removal | <ul><li>As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers.</li></ul><p> </p><ul><li>It’s also a lifesaver when your first layer decides to go rogue. Instead of sa... | [] | 3D Printers > Prusa Parts & Upgrades | [
"1208740/images/image_1_compressed.jpg",
"1208740/images/image_2_compressed.jpg",
"1208740/images/image_3_compressed.jpg",
"1208740/images/image_4_compressed.jpg"
] | [
"1208740/stls/Scraper V.1.stl",
"1208740/stls/scraper V.2 .stl",
"1208740/stls/scraper V.2 v1.stl"
] | CC-BY | https://www.printables.com/model/1208740 | data_0047.tar |
308884 | Scrapper for stanley cutter blade |
<p>Scrapper for leveling the 3d printer bed masked with tape and also helps to remove the 3d printed objects from the bed</p>
Category: 3D Printer Accessories
| [
"blade",
"tools",
"thingiverse",
"aneta8parts",
"scrapper"
] | 3D Printers > Accessories | [
"308884/images/image_1_compressed.jpg",
"308884/images/image_2_compressed.jpg",
"308884/images/image_3_compressed.jpg",
"308884/images/image_4_compressed.jpg"
] | [
"308884/stls/sCRAPPER_FOR_STANLEY_BALDE.stl"
] | CC-BY | https://www.printables.com/model/308884 | data_0047.tar |
1440793 | Scratch Gauge 13mm wide ruler / Streichmaß für 13mm breites Lineal | <p>Compatible with a 13mm wide ruler.</p><p>Block is best printed laying on the reference surface. Bolt standing on its head.</p><p>0.4mm nozzle, 0.2mm layer</p><p>Info: Old model I used to upload to Thingiverse in 2019.</p> | [] | Hobby & Makers > Tools | [
"1440793/images/image_1_compressed.jpg",
"1440793/images/image_2_compressed.jpg",
"1440793/images/image_3_compressed.jpg",
"1440793/images/image_4_compressed.jpg",
"1440793/images/image_5_compressed.jpg",
"1440793/images/image_6_compressed.jpg"
] | [
"1440793/stls/scratch_gauge_block.stl",
"1440793/stls/scratch_gauge_bolt.stl"
] | CC0 | https://www.printables.com/model/1440793 | data_0047.tar |
235274 | Scream | <p>This is a bistable compliant fidget clicker. I started tinkering with <a href="https://www.printables.com/model/230835-bistable-compliant-fidget-clicker">https://www.printables.com/model/230835-bistable-compliant-fidget-clicker</a> and it turned out to become this Edvard Munch like shape.</p><figure class="media"><o... | [
"fidget",
"compliant"
] | Toys & Games > Other Toys & Games | [
"235274/images/image_1_compressed.jpg"
] | [
"235274/stls/scream-2022-1-3.stl"
] | CC-BY | https://www.printables.com/model/235274 | data_0047.tar |
328960 | Scream Earrings - Remix | <p>This is a remix of the Scream Earrings 3D model. I made the hoodie and face into separate pieces that can be put together (glued). This eliminates the need to change filament mid-print and also means the front and back of the earrings can have a smoother finish (bed side).</p><p>This is a remix of the ex... | [
"halloween",
"earrings",
"scream",
"dangleearrings"
] | Fashion > Other Fashion Accessories | [
"328960/images/image_1_compressed.jpg"
] | [
"328960/stls/scream-earrings-hoodie.stl",
"328960/stls/scream-earrings-inner.stl"
] | GPL2.0 | https://www.printables.com/model/328960 | data_0047.tar |
203732 | Screw bit organizer case | <p>I really liked <a href="https://www.printables.com/model/10670-drill-screw-bit-organizer-case">Luke's 3D case</a>, but I needed one without the drill holes, so I edited it out.</p><p>Kudos to <a href="https://www.printables.com/social/11728-lukes-3d/about">Luke's 3D</a> for this nice model!</p> | [
"bit",
"drill",
"hex",
"screwdriver",
"hexbit",
"drillbit",
"drillbitholder"
] | Hobby & Makers > Organizers | [
"203732/images/image_1_compressed.jpg",
"203732/images/image_2_compressed.jpg",
"203732/images/image_3_compressed.jpg"
] | [
"203732/stls/drill__screw_bit_organizer_case_bottom.stl",
"203732/stls/hex_bits_screw_bit_organizer_case_top_without_drill.stl"
] | CC-BY | https://www.printables.com/model/203732 | data_0047.tar |
161297 | Screw Mount (Garden) Tool Holder | <p>I've added a recess to countersink screws for mounting directly to wood. The rotating part may loosen over time, but so far it's stable.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>CR10S PRO</p></div>
<p><stro... | [
"tool",
"garden",
"thingiverse"
] | Household > Outdoor & Garden | [
"161297/images/image_1_compressed.jpg",
"161297/images/image_2_compressed.jpg",
"161297/images/image_3_compressed.jpg"
] | [
"161297/stls/Big_Fix_new.stl",
"161297/stls/Big_Moving_New.stl"
] | CC-BY | https://www.printables.com/model/161297 | data_0047.tar |
523246 | Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less | <p>Checkers pieces have a habit of getting lost so secure them in this container!</p><p>Note: Not really a remix as its a new design but it was built to complement the model <a href="https://www.printables.com/model/371301-checkers-and-checker-board">here</a> so I added it as a remix so its easy to find for people. &nb... | [
"screwtop",
"screw",
"tube",
"boardgame",
"25mm",
"checkers",
"checkersboard",
"screwtopcontainer",
"checker",
"checkersset"
] | Toys & Games > Board Games | [
"523246/images/image_1_compressed.jpg",
"523246/images/image_2_compressed.jpg"
] | [
"523246/stls/checkersTube.stl",
"523246/stls/tubeCap.stl"
] | CC-BY | https://www.printables.com/model/523246 | data_0047.tar |
394017 | Screw-In Cable Clip | <p>I designed this cable clip to neatly mount speaker wires on my wall but it can be used with any wire that fits.</p><p>Hope this helps:)</p> | [
"cablemanagement",
"cableclip",
"cablechain",
"cableorganizer",
"audiocable",
"speakerwire",
"speakercable"
] | Hobby & Makers > Mechanical Parts | [
"394017/images/image_1_compressed.jpg"
] | [
"394017/stls/Cable Clip.stl"
] | CC0 | https://www.printables.com/model/394017 | data_0047.tar |
1446590 | Screw-mount bracket for WAGO connectors | <p>A low-profile, 3D-printed bracket that secures <strong>WAGO lever connectors</strong> to a panel using two screws, plus matching cable clamps for simple strain relief. The carrier holds the connector firmly while keeping the levers accessible and the wire exits clear. Ideal for tidy wiring inside enclosures, control... | [
"wago"
] | Hobby & Makers > Electronics | [
"1446590/images/image_1_compressed.jpg"
] | [
"1446590/stls/WAGO x3.stl",
"1446590/stls/WAGO x5.stl"
] | CC0 | https://www.printables.com/model/1446590 | data_0047.tar |
312475 | Screwdriver Bit and Impact Driver Bit Holder Organizer | <p>Use this to store and organize your hexagonal bits, driver bits, impact bits, screwdriver bits , socket set bits, driver adapters, as well as hex mounted drill bits.<br>-Simply place the hex driver bits in vertically and spaced as desired. <br>-This print makes them easy to categorize and index bits as desired ... | [
"tool",
"toolbox",
"tools",
"toolholder",
"toolsholder",
"toolstorage",
"toolorganizer"
] | Hobby & Makers > Organizers | [
"312475/images/image_1_compressed.jpg",
"312475/images/image_2_compressed.jpg",
"312475/images/image_3_compressed.jpg",
"312475/images/image_4_compressed.jpg",
"312475/images/image_5_compressed.jpg",
"312475/images/image_6_compressed.jpg",
"312475/images/image_7_compressed.jpg"
] | [
"312475/stls/Bit Holder.stl"
] | CC-BY | https://www.printables.com/model/312475 | data_0047.tar |
224279 | Screwdriver Handle | <p>I was really annoyed with the tiny handles some of these cheap screwdrivers come with, so I decided to make new, proper ones.</p><h5>Print Settings</h5><ul><li>Brim recommended</li><li>Layer height 0.2mm (anything more gave me trouble in the bottom 45° overhang - edges curled up)</li><li>I added a modifier block in ... | [
"tool",
"handle",
"screwdriver",
"handtools",
"screwdriverhandle",
"thingiverse"
] | Hobby & Makers > Tools | [
"224279/images/image_1_compressed.jpg",
"224279/images/image_2_compressed.jpg",
"224279/images/image_3_compressed.jpg"
] | [
"224279/stls/screwdriver_S2L55D15.stl",
"224279/stls/screwdriver_S3L70D19.stl",
"224279/stls/screwdriver_S4L75D21.stl",
"224279/stls/screwdriver_S5L80D25.stl"
] | CC-BY | https://www.printables.com/model/224279 | data_0047.tar |
1757339 | Screwdriver holder, honeycomb pattern / Držák na šroubováky | <p><strong>Solid wall mount with honeycomb pattern. Hexagon diameter 9mm.</strong></p><p>Use two screws, length as needed.</p><p>Material PETG or PCTG.</p> | [
"hexagon",
"wall",
"holder",
"wallmount",
"honeycomb",
"workshop",
"screw",
"petg",
"garage",
"screwdriver",
"pattern",
"work",
"drzak",
"workshoporganiser",
"sroubovak",
"sroubovaky",
"pctg",
"drzaknasroubovaky"
] | Household > Garage | [
"1757339/images/image_1_compressed.jpg",
"1757339/images/image_2_compressed.jpg",
"1757339/images/image_3_compressed.jpg",
"1757339/images/image_4_compressed.jpg",
"1757339/images/image_5_compressed.jpg",
"1757339/images/image_6_compressed.jpg"
] | [
"1757339/stls/Screwdriver holder, honeycomb pattern.stl"
] | CC0 | https://www.printables.com/model/1757339 | data_0047.tar |
570258 | Screwdriver Set with Bits Holder for HSW | <p>A simple holder for a Chinese screwdriver set I got from AliExpress made to utilize little filament.</p><p>I used 3 perimeters and layer height of 0.2mm with 5% infill. Printed in about 1 hour.</p> | [
"organizer",
"holder",
"scredriver",
"honeycombstoragewall",
"hsw"
] | Hobby & Makers > Organizers | [
"570258/images/image_1_compressed.jpg",
"570258/images/image_2_compressed.jpg",
"570258/images/image_3_compressed.jpg",
"570258/images/image_4_compressed.jpg",
"570258/images/image_5_compressed.jpg",
"570258/images/image_6_compressed.jpg"
] | [
"570258/stls/Screw Driver & Bits HSW.stl"
] | CC0 | https://www.printables.com/model/570258 | data_0047.tar |
179388 | Screwless key holder | <p>There are a lot of "folding knife" style key holders, key bars or key bones. Most, if not all of them, require screws with the correct length. Screws that needs to be re-tightened now and then, to give the right friction or just to keep it from falling apart.</p><p>This key holder integrates a standard 4 mm nylon ca... | [
"holder",
"keyholder",
"keychain",
"foldable",
"key",
"ziptie",
"screwless",
"thingiverse",
"keychains",
"noscrews",
"keybar",
"keybone",
"noscrewingaround"
] | Household > Office | [
"179388/images/image_1_compressed.jpg",
"179388/images/image_2_compressed.jpg",
"179388/images/image_3_compressed.jpg",
"179388/images/image_4_compressed.jpg",
"179388/images/image_5_compressed.jpg",
"179388/images/image_6_compressed.jpg",
"179388/images/image_7_compressed.jpg",
"179388/images/image_8... | [
"179388/stls/KH_A_top.stl",
"179388/stls/KH_B_bottom.stl",
"179388/stls/KH_C_shims.stl",
"179388/stls/KH_D_Optional.stl",
"179388/stls/KH_D_Optional_2mm.stl"
] | CC-BY | https://www.printables.com/model/179388 | data_0047.tar |
150887 | Scrub Daddy Kitchen Sink Caddy |
<p>My wife needed something to hold her Scrub daddy sponges. This is designed to fit over my sinks middle divider and hold the daddy/mommy sponge with the spikes for the eyes and another normal sponge on the other side.</p>
<p>Designed so that the daddy/mommy sponge will be below the top of the sink. But can work as... | [
"sponge",
"thingiverse",
"kitchensink",
"scrubdaddy"
] | Household > Kitchen | [
"150887/images/image_1_compressed.jpg",
"150887/images/image_2_compressed.jpg",
"150887/images/image_3_compressed.jpg",
"150887/images/image_4_compressed.jpg",
"150887/images/image_5_compressed.jpg"
] | [
"150887/stls/sink_holder_1.stl"
] | CC-BY | https://www.printables.com/model/150887 | data_0047.tar |
670612 | Scuba DIN regulator cap | <p>A cap to protect the thread of DIN regulator, a small hole allow to use a cord to fix it and avoid to loose it.</p><p>The design allow to use it easily</p> | [
"cap",
"din",
"scubadiving",
"regulator",
"scubaregulator"
] | Sports & Outdoor > Outdoor Sports | [
"670612/images/image_1_compressed.jpg",
"670612/images/image_2_compressed.jpg"
] | [
"670612/stls/scuba din regulator cap.stl"
] | CC0 | https://www.printables.com/model/670612 | data_0047.tar |
497553 | SCUBA DIVING HOSE HOLDER CLIPS | Hooking air hoses for diving | Download free 3D printable STL models | [
"diving",
"scuba",
"scubadiving"
] | Sports & Outdoor > Outdoor Sports | [
"497553/images/image_1_compressed.jpg"
] | [
"497553/stls/Porta Fruste.stl"
] | GPL2.0 | https://www.printables.com/model/497553 | data_0047.tar |
12633 | SCUBA Hanger | <p>Scuba Diving Hanger you can use an M3 screw and a nut to join the parts together.</p>
<h3>Print instructions</h3><p>Category: 3D Printing</p> | [
"hanger",
"thingiverse",
"scuba",
"scubadiving"
] | Sports & Outdoor > Outdoor Sports | [
"12633/images/image_1_compressed.jpg",
"12633/images/image_2_compressed.jpg",
"12633/images/image_3_compressed.jpg",
"12633/images/image_4_compressed.jpg",
"12633/images/image_5_compressed.jpg",
"12633/images/image_6_compressed.jpg"
] | [
"12633/stls/hagercenter.stl",
"12633/stls/hangerleft.stl",
"12633/stls/hanguerright.stl"
] | GPL2.0 | https://www.printables.com/model/12633 | data_0047.tar |
1156782 | SCX24 Buggy | <p>This is a work in progress scx24 chassis I have been working on for myself but have decided to list for free. It may not work with all stock or aftermarket parts, but you may be able to make alternative parts work.</p><p> </p><p>This was designed to work with;</p><p>LGRP super 8 axles (Rear Steer)</p><p>050 bru... | [
"custom",
"racecar",
"crawler",
"buggy",
"scx24",
"ultra4",
"u4",
"lgrp"
] | Hobby & Makers > RC & Robotics | [
"1156782/images/image_1_compressed.jpg",
"1156782/images/image_2_compressed.jpg",
"1156782/images/image_3_compressed.jpg",
"1156782/images/image_4_compressed.jpg",
"1156782/images/image_5_compressed.jpg"
] | [
"1156782/stls/Battery Mount.stl",
"1156782/stls/Cage.stl",
"1156782/stls/Door Panel.stl",
"1156782/stls/ESC Mount.stl",
"1156782/stls/Frame.stl",
"1156782/stls/Front Lower.stl",
"1156782/stls/Front Upper.stl",
"1156782/stls/Hood.stl",
"1156782/stls/Light Bar.stl",
"1156782/stls/Rear Lower.stl",
... | CC-BY | https://www.printables.com/model/1156782 | data_0047.tar |
1160264 | SCX24 Flex Link Mod | <p>This is the best mod for your SCX24 for only a few cents of filament! Gives your rig around 65% more flex! This is probably my most favorite mod I have ever made.</p><p>To install you will want to remove your shocks from the towers and put them a little lower as seen in the picture. (Same on the front. Move the shoc... | [
"suspension",
"scx24",
"scx24mod",
"scx24suspension",
"scx24upgrade",
"scx24flexlinks"
] | Hobby & Makers > RC & Robotics | [
"1160264/images/image_1_compressed.jpg",
"1160264/images/image_2_compressed.jpg",
"1160264/images/image_3_compressed.jpg",
"1160264/images/image_4_compressed.jpg",
"1160264/images/image_5_compressed.jpg"
] | [
"1160264/stls/Scx_24_Flex_Links.stl"
] | CC-BY | https://www.printables.com/model/1160264 | data_0047.tar |
264020 | SD Card Model | <p>SD Card Model</p><p>I needed an SD card model that would slide into SD card slots. The few dummies I found wouldn't actualy fit.</p><p>So here's a model that you can print, and actually use as a dust cover or mock-up or whatever.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>... | [
"sdcard",
"thingiverse"
] | Gadgets > Computers | [
"264020/images/image_1_compressed.jpg",
"264020/images/image_2_compressed.jpg",
"264020/images/image_3_compressed.jpg",
"264020/images/image_4_compressed.jpg"
] | [
"264020/stls/SD Card.stl"
] | CC-BY | https://www.printables.com/model/264020 | data_0047.tar |
404319 | SD Scraper V2 | <p>Based on the fantastic model by DRAXX, I added an inset on the bridge so it's level with the top of the SD ejector. Now when you put it on the Bambu screen it stays level.</p> | [] | Hobby & Makers > Tools | [
"404319/images/image_1_compressed.jpg",
"404319/images/image_2_compressed.jpg",
"404319/images/image_3_compressed.jpg"
] | [
"404319/stls/SD Scraper V2-GENERIC.stl",
"404319/stls/SD Scraper V2-PROJECT.stl"
] | CC0 | https://www.printables.com/model/404319 | data_0047.tar |
315588 | SD2PSX Case | <p>alternative case for the sd2psx-project.<br><br>- printable on fdm-printers<br>- 4x M2*4 sockethead-screws</p><p>project-link:<br><a href="https://github.com/sd2psx">https://github.com/sd2psx</a><br><br>thanks to bbsan for inspiration and testing</p> | [
"playstation",
"psx",
"sd2psx"
] | Gadgets > Video Games | [
"315588/images/image_1_compressed.jpg"
] | [
"315588/stls/bottom.stl",
"315588/stls/button.stl",
"315588/stls/top.stl"
] | CC0 | https://www.printables.com/model/315588 | data_0047.tar |
576603 | Sea Shells | <p>3 different models of shells.</p><p>No special settings for printing.</p> | [
"sea",
"shell",
"mar",
"shells",
"concha",
"conchas"
] | Art & Design > Sculptures | [
"576603/images/image_1_compressed.jpg"
] | [
"576603/stls/Sea Shells.stl",
"576603/stls/Sea_Shells.stl"
] | CC0 | https://www.printables.com/model/576603 | data_0047.tar |
451982 | Seahorse cookie cutter | <p>Nozzle: 0,4</p><p>Supports: NO</p><p>PLA, PETG </p> | [
"cookie",
"children",
"fun",
"cookiecutter",
"seahorse"
] | Household > Kitchen | [
"451982/images/image_1_compressed.jpg"
] | [
"451982/stls/Seahorse.stl"
] | CC0 | https://www.printables.com/model/451982 | data_0047.tar |
214524 | Seahorse symetric magnets - Fridge version | <p>Hello,</p><p>I resized my Seahorse magnets to let them fit better on a fridge door.</p><ul><li>Requires 1 magnet 8x3mm per side.</li><li>Filament for printed model : 3DJake MagicPLA Watermelon</li></ul><p>Enjoy !</p> | [
"magnet",
"magnets",
"seahorse",
"fridgemagnet",
"fridgemagnets"
] | Household > Kitchen | [
"214524/images/image_1_compressed.jpg",
"214524/images/image_2_compressed.jpg"
] | [
"214524/stls/Seahorse_magnets_fridge_version.stl"
] | CC0 | https://www.printables.com/model/214524 | data_0047.tar |
48244 | Seal Owl | <p>I meshmixed a seal and an owl. Enjoy!</p>
<h3>Print instructions</h3><h3>Category: Art Summary</h3>
<p>I meshmixed a seal and an owl. Enjoy!</p> | [
"art",
"seal",
"owl",
"thingiverse",
"meshmixer",
"hybrid"
] | Art & Design > Sculptures | [
"48244/images/image_1_compressed.jpg"
] | [
"48244/stls/seal_owl.stl"
] | CC-BY | https://www.printables.com/model/48244 | data_0047.tar |
592233 | Seam Test | <p>Seam test, contains flat, and curved walls, and corners.</p><p>Height is 10mm.</p> | [
"test",
"testprint",
"testmodel",
"seam",
"seams"
] | 3D Printers > Test Models | [
"592233/images/image_1_compressed.jpg"
] | [
"592233/stls/seam2.stl"
] | GPL3.0 | https://www.printables.com/model/592233 | data_0047.tar |
773561 | Seat Ibiza air vent ring | <p>Air vent rings for the Seat Ibiza dashboard vents. Tested on a 2011 model. The size is intended to be a snuggle fit. Push it until it makes a click sound. It won't move and wind even on highest and with all vents closed won't spit it out. </p> | [
"seat",
"airvent",
"ibiza"
] | Hobby & Makers > Automotive | [
"773561/images/image_1_compressed.jpg",
"773561/images/image_2_compressed.jpg",
"773561/images/image_3_compressed.jpg",
"773561/images/image_4_compressed.jpg",
"773561/images/image_5_compressed.jpg"
] | [
"773561/stls/SeatIbizaAirVentMK3.stl"
] | CC0 | https://www.printables.com/model/773561 | data_0047.tar |
581048 | Seatbelt Adjuster Clip | <p>This lightweight clip will help to adjust the length and positioning of your seatbelt strap. It is printed with PLA at 100% infill.</p><p> </p> | [
"beltclip",
"adjuster",
"seatbelt"
] | Hobby & Makers > Automotive | [
"581048/images/image_1_compressed.jpg"
] | [
"581048/stls/Seatbelt clip-V4.stl"
] | CC-BY | https://www.printables.com/model/581048 | data_0047.tar |
106849 | Seatbelt Clip Volvo (V40) | <p>This is a simple Seatbelt Clip for the Volvo V40 (2016 Edition). </p><p>It was built for strapping down things on the back seat of my Volvo V40 2016 Edition. I bet its compatible with various Volvo Models.</p><p>Current tested Use cases are:</p><ul><li>Strapping down Goods</li><li>Attaching Dog with leash to ba... | [
"car",
"seatbelt",
"seatbeltbuckle",
"seatbeltclip"
] | Hobby & Makers > Automotive | [
"106849/images/image_1_compressed.jpg"
] | [
"106849/stls/VolvoSeatBeltClip.stl",
"106849/stls/VolvoSeatbeltClip.stl"
] | CC0 | https://www.printables.com/model/106849 | data_0047.tar |
498420 | Seatbelt dummy clip. | <p>This clips into the seat belt end to stop/ override the seat belt alarm.</p>
<p>Can used when on game drives, birding or when have a inanimate load on the seat that triggers the alarm.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer... | [
"clip",
"stop",
"thingiverse",
"alarm",
"dummy",
"seatbelt",
"seatbeltbuckle",
"override"
] | Hobby & Makers > Automotive | [
"498420/images/image_1_compressed.jpg",
"498420/images/image_2_compressed.jpg",
"498420/images/image_3_compressed.jpg",
"498420/images/image_4_compressed.jpg",
"498420/images/image_5_compressed.jpg"
] | [
"498420/stls/clip.stl",
"498420/stls/handle.stl"
] | CC-BY | https://www.printables.com/model/498420 | data_0047.tar |
679311 | SeatBelt Positioner / Adjuster | <p>You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over your shoulder can be adjusted :)</p>
<p>Ideally print in ASA as it is going to be... | [
"thingiverse",
"seatbelt",
"seatbeltadjuster"
] | Hobby & Makers > Automotive | [
"679311/images/image_1_compressed.jpg",
"679311/images/image_2_compressed.jpg"
] | [
"679311/stls/seatbeltpositioner.stl"
] | CC-BY | https://www.printables.com/model/679311 | data_0047.tar |
894016 | Seatbelt Silencer Clip | <p>This 3D printable seatbelt silencer clip is a handy solution for those times when you need to stop the constant seatbelt alarm in your car. Whether you’re driving around the parking lot or need to silence the alarm for any reason, this clip easily inserts into the seatbelt buckle to prevent the chime from sounding. ... | [
"clip",
"car",
"buckle",
"alarm",
"silencer",
"seatbelt"
] | Hobby & Makers > Automotive | [
"894016/images/image_1_compressed.jpg"
] | [
"894016/stls/Seatbelt Silencer Clip.stl"
] | CC0 | https://www.printables.com/model/894016 | data_0047.tar |
603515 | Seattle Seahawks Coaster | <p>Seattle Seahawks Coaster</p> | [
"coaster",
"football",
"nfl",
"drinkcoaster",
"seattle",
"seahawks",
"seattleseahawks"
] | Art & Design > 2D Plates & Logos | [
"603515/images/image_1_compressed.jpg"
] | [
"603515/stls/SeahawksCoaster.stl"
] | CC-BY | https://www.printables.com/model/603515 | data_0047.tar |
961791 | Sebastian Solace + shop items (Pressure Roblox) | <p>this models are not mine, they belong to the game <a href="https://www.roblox.com/es/games/12411473842/Pressure"><i><strong>Pressure </strong></i></a>made by the group <a href="https://www.roblox.com/es/groups/9683893/Urbanshade-Hadal-Division#!/about"><i><strong>Urbanshade: Hadal Division</strong></i></a></p> | [
"roblox",
"robloxpressure"
] | Art & Design > Sculptures | [
"961791/images/image_1_compressed.jpg",
"961791/images/image_2_compressed.jpg",
"961791/images/image_3_compressed.jpg",
"961791/images/image_4_compressed.jpg"
] | [
"961791/stls/sebastian (3mf).stl",
"961791/stls/sebastian.stl",
"961791/stls/sebastian_base.stl",
"961791/stls/shop items.stl"
] | CC0 | https://www.printables.com/model/961791 | data_0047.tar |
474244 | Secret Shelf for Honeycomb Storage Wall | <p>I added Honeycomb Storage Wall connectors to the original Secret Shelf.</p> | [
"honeycomb",
"honeycombstoragewall",
"honeycombwall",
"hsw",
"secretshelf"
] | Hobby & Makers > Organizers | [
"474244/images/image_1_compressed.jpg",
"474244/images/image_2_compressed.jpg"
] | [
"474244/stls/Inner Shelf (Hexified).stl",
"474244/stls/Outer Shelf (unchanged).stl"
] | CC0 | https://www.printables.com/model/474244 | data_0047.tar |
525582 | Secret shelf with holes for magnets | <p>The same secret shelf from tosh. I changed it to have a magnet hole so you can change the place.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="de... | [
"shelf",
"wall",
"money",
"wallmount",
"secret",
"thingiverse",
"stash",
"hide"
] | Household > Home Decor | [
"525582/images/image_1_compressed.jpg",
"525582/images/image_2_compressed.jpg",
"525582/images/image_3_compressed.jpg",
"525582/images/image_4_compressed.jpg",
"525582/images/image_5_compressed.jpg",
"525582/images/image_6_compressed.jpg",
"525582/images/image_7_compressed.jpg"
] | [
"525582/stls/Shelf_inside-2.stl",
"525582/stls/shelf_outside.stl"
] | CC-BY | https://www.printables.com/model/525582 | data_0047.tar |
157086 | Secure Filament Clip - 1.75 | <p>Wedge the first loop into the lower slot. Use a finger on each side of the clip to snap the end into the upper channel leaving about 5cm of slack. Pinch the filament behind the clip and push towards the loose end. Things should be nice and secure.</p><h3>Print Settings</h3><p><strong>Notes:</strong></p><p>0 to... | [
"thingiverse"
] | 3D Printers > Accessories | [
"157086/images/image_1_compressed.jpg",
"157086/images/image_2_compressed.jpg",
"157086/images/image_3_compressed.jpg"
] | [
"157086/stls/filament_clip_V2.stl"
] | CC-BY | https://www.printables.com/model/157086 | data_0047.tar |
94427 | seed driller | [
"garden",
"seed",
"driller"
] | Household > Outdoor & Garden | [
"94427/images/image_1_compressed.jpg"
] | [
"94427/stls/seeddrill-base.stl",
"94427/stls/seeddrill-head.stl"
] | CC0 | https://www.printables.com/model/94427 | data_0047.tar | |
28420 | Seed pot | <p>Seed pot: print, plant seeds, water, watch them grow</p>
<h3>Print instructions</h3><p>Printed in PLA, 0.2mm layers</p> | [
"pot",
"seed",
"gardening"
] | Household > Outdoor & Garden | [
"28420/images/image_1_compressed.jpg",
"28420/images/image_2_compressed.jpg"
] | [
"28420/stls/pot.stl"
] | CC0 | https://www.printables.com/model/28420 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.