model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1588408 | Seestar s30 pro dust cover | <p>S30 pro arrived. Wanted a dust cover. The S30 one works but does not cover telephoto lens.</p><p>Modified lifour S30 Dust Cover in Fusion360 to fit better. Works okay. Better in Pla Pro or Petg. </p><p>Version was updated. Has rounded bottom and more pronounced lip for better fit. This one is better.</p><p>If P... | [] | Hobby & Makers > Electronics | [
"1588408/images/image_1_compressed.jpg",
"1588408/images/image_2_compressed.jpg"
] | [
"1588408/stls/seestar-s30-lens-cover v3.stl",
"1588408/stls/seestar-s30-lens-cover-v5.stl"
] | CC-BY | https://www.printables.com/model/1588408 | data_0047.tar |
1292162 | Self Defense Keychains - Fox & Bunny | <p>I'll admit, it's not the most original, but I wanted to design some of these to be a little more structurally reliable with a killer aesthetic. I think they came out great- easy to scale for different sized hands, and even easier to print</p><p>Fox is a clean and simple design, Bunny adds two buck teeth that stabili... | [
"keychain",
"selfdefense"
] | Fashion > Other Fashion Accessories | [
"1292162/images/image_1_compressed.jpg",
"1292162/images/image_2_compressed.jpg"
] | [
"1292162/stls/Bunny.stl",
"1292162/stls/fox.stl"
] | CC0 | https://www.printables.com/model/1292162 | data_0047.tar |
680727 | Self Feeding Open Source Filament Pelletizer (REMIX) | <p>Remixed @TeachingTech 's <a href="https://www.printables.com/model/672486-self-feeding-open-source-filament-pelletizer">Self Feeding Open Source Filament Pelletizer</a>, adding a soda bottle thread, removing the need for the additional TPU Seal, widening insert holes, and adding additional material around inserts.</... | [
"recycle",
"opensource",
"pellets",
"injectionmolding",
"recyclingbin",
"pelletizer"
] | 3D Printers > Accessories | [
"680727/images/image_1_compressed.jpg",
"680727/images/image_2_compressed.jpg"
] | [
"680727/stls/centre-plate_V2.stl",
"680727/stls/collection-adapter_V2.stl",
"680727/stls/end-plate-a_V2.stl",
"680727/stls/end-plate-b_V2.stl",
"680727/stls/idler-spring.stl",
"680727/stls/large-gear.stl",
"680727/stls/medium-gear.stl",
"680727/stls/small-gear.stl",
"680727/stls/spacer-a_V3.stl",
... | CC-BY | https://www.printables.com/model/680727 | data_0047.tar |
181375 | Self glowing (luminescent) Exit-, First- and Medical-Aid Signs | <p>A series of self-glowing exit and emergency signs i published on another platform a few years ago. <br>2 color print. Switch filament from green to self glowing for the final layers. <br>The gcode files for Prusa i3 MK3S already have the color change stop integrated. <br>Use at your own risk.</p> | [
"doctor",
"fire",
"emergency",
"exit",
"hazard",
"firstaid",
"stretcher",
"laddder",
"defibrilator"
] | Hobby & Makers > Other Ideas | [
"181375/images/image_1_compressed.jpg",
"181375/images/image_2_compressed.jpg",
"181375/images/image_3_compressed.jpg"
] | [
"181375/stls/Doctor_01.stl",
"181375/stls/Emergency_Exit_Direction_1_Left_01.stl",
"181375/stls/Emergency_Exit_Direction_1_Right_01.stl",
"181375/stls/Emergency_Exit_Direction_2_Left_01.stl",
"181375/stls/Emergency_Exit_Direction_2_Right_01.stl",
"181375/stls/Emergency_Exit_Left_01.stl",
"181375/stls/Em... | CC-BY | https://www.printables.com/model/181375 | data_0047.tar |
544533 | Self Watering Bird Bath | <p>This is a simple bird bath for helping out the little birds during summer. I tried to minimize the material used so that its an easy yet practical print.</p><p>You will need a pan and a 2 liter soda bottle. </p><p>I updated the model with threads so that it’s easier to screw on like a cap. There is are 2 holes ... | [
"birdbath"
] | Household > Outdoor & Garden | [
"544533/images/image_1_compressed.jpg",
"544533/images/image_2_compressed.jpg"
] | [
"544533/stls/Bottle Sleeve.stl",
"544533/stls/Self Watering Bird Bath.stl"
] | CC-BY | https://www.printables.com/model/544533 | data_0047.tar |
836728 | Self Watering Semi Hydroponic Planter (Parametric) | <p>Are you struggling to properly water your plants? Look no further, because I got your solution here!</p><p>This is a self watering semi hydroponic system that comes <strong>in various sizes</strong>! Water from the reservoir is transported to the roots by a wick. The floating indicator tells you when it's time to to... | [
"parametric",
"plant",
"planter",
"cube",
"garden",
"grow",
"hydroponics",
"wick",
"hydro",
"aesthetic",
"lechuza",
"semi",
"wicking",
"semihydro",
"semihydroponics"
] | Household > Home Decor | [
"836728/images/image_1_compressed.jpg",
"836728/images/image_2_compressed.jpg",
"836728/images/image_3_compressed.jpg",
"836728/images/image_4_compressed.jpg",
"836728/images/image_5_compressed.jpg",
"836728/images/image_6_compressed.jpg",
"836728/images/image_7_compressed.jpg",
"836728/images/image_8... | [
"836728/stls/100x100x100.stl",
"836728/stls/100x100x125.stl",
"836728/stls/110x110x110.stl",
"836728/stls/115x115x115.stl",
"836728/stls/125x125x100.stl",
"836728/stls/125x125x125.stl",
"836728/stls/150x150x100.stl",
"836728/stls/150x150x125.stl",
"836728/stls/150x150x150.stl",
"836728/stls/200x20... | CC-BY | https://www.printables.com/model/836728 | data_0047.tar |
706036 | self watering tool - well designed - water tight no sealing needed - PET bottles | <p>This is a well designed watering helper for plants. It comes with different watering pipes, to adust for you're plant.</p>
<ul>
<li>the pipes have different diameters (from 0,4 mm to 1,4 mm)</li>
<li>the pipes are screwed to the cap and water tight</li>
<li>no support needed, the pipe is separated, to print without ... | [
"selfwatering",
"planter",
"petbottlecap",
"thingiverse",
"watertight",
"plantwatering",
"petbottle",
"selfwateringplanter"
] | Household > Outdoor & Garden | [
"706036/images/image_1_compressed.jpg",
"706036/images/image_10_compressed.jpg",
"706036/images/image_11_compressed.jpg",
"706036/images/image_12_compressed.jpg",
"706036/images/image_13_compressed.jpg",
"706036/images/image_14_compressed.jpg",
"706036/images/image_15_compressed.jpg",
"706036/images/i... | [
"706036/stls/04mm_hole_diameter.stl",
"706036/stls/06mm_hole_diameter.stl",
"706036/stls/08mm_hole_diameter.stl",
"706036/stls/1,0mm_hole_diameter.stl",
"706036/stls/1,2mm_hole_diameter.stl",
"706036/stls/1,4mm_hole_diameter.stl",
"706036/stls/lid.stl"
] | CC-BY | https://www.printables.com/model/706036 | data_0047.tar |
1538943 | Sensor Bracket Centauri Carbon | <p>A simple bracket that provided me with a more satisfactory angle for feeding filament from my drier. It uses all the stock hardware to mount and takes about ten minutes to make with about 3.5 grams of filament.</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1538943/images/image_1_compressed.jpg",
"1538943/images/image_2_compressed.jpg",
"1538943/images/image_3_compressed.jpg",
"1538943/images/image_4_compressed.jpg"
] | [
"1538943/stls/angled filament sensor bracket.stl"
] | CC-BY | https://www.printables.com/model/1538943 | data_0047.tar |
1101621 | Sensorbox v2 modified Serial Carrier | [] | 3D Printers > Accessories | [
"1101621/images/image_1_compressed.jpg"
] | [
"1101621/stls/serial_carrier.stl"
] | CC-BY | https://www.printables.com/model/1101621 | data_0047.tar | |
1315605 | Sensory play gingerbread tray | [
"education",
"tray",
"child",
"kinder",
"montessori",
"gingerbread",
"sensory",
"kindergarten"
] | Toys & Games > Other Toys & Games | [
"1315605/images/image_1_compressed.jpg"
] | [
"1315605/stls/perníček.stl"
] | CC-BY | https://www.printables.com/model/1315605 | data_0047.tar | |
209710 | Separator plates and parts for Stanley organizer | <p>Parts organizer from Stanley is really neat when to put all your small screws, nuts, washers, 3d printer nozzles, and other small things in an orderly fashion. Unfortunately, it comes without any separator plates, separator plates don't ship to some of the countries and even if you get the original ones, the quality... | [
"organizer",
"spareparts",
"stanley"
] | Hobby & Makers > Organizers | [
"209710/images/image_1_compressed.jpg",
"209710/images/image_2_compressed.jpg",
"209710/images/image_3_compressed.jpg",
"209710/images/image_4_compressed.jpg",
"209710/images/image_5_compressed.jpg",
"209710/images/image_6_compressed.jpg",
"209710/images/image_7_compressed.jpg",
"209710/images/image_8... | [
"209710/stls/divider-horizontal.stl",
"209710/stls/divider-simple.stl",
"209710/stls/divider-vertical.stl",
"209710/stls/tray.stl"
] | CC-BY | https://www.printables.com/model/209710 | data_0047.tar |
32353 | Servo connector clip | <p>If you are like me buying cheap servo connectors without additional housing this might add feel of extra foolproof safety.</p>
<p>Printing 0,15mm layer height, 32 pcs will take approx 3h</p>
| [
"rc",
"safety",
"servo"
] | Hobby & Makers > RC & Robotics | [
"32353/images/image_1_compressed.jpg",
"32353/images/image_2_compressed.jpg",
"32353/images/image_3_compressed.jpg"
] | [
"32353/stls/servo_connector_clip_2.stl"
] | GPL3.0 | https://www.printables.com/model/32353 | data_0047.tar |
872105 | servo tester case (no additional parts required) | <p>This is a case for a servo tester. You don't need any extra parts, just the servo tester. It consists of two parts that are snuklie together.</p> | [
"case",
"tester",
"servo"
] | Hobby & Makers > Electronics | [
"872105/images/image_1_compressed.jpg",
"872105/images/image_2_compressed.jpg",
"872105/images/image_3_compressed.jpg",
"872105/images/image_4_compressed.jpg",
"872105/images/image_5_compressed.jpg",
"872105/images/image_6_compressed.jpg",
"872105/images/image_7_compressed.jpg"
] | [
"872105/stls/servo tester case 1.stl",
"872105/stls/servo tester case 2.stl"
] | CC-BY | https://www.printables.com/model/872105 | data_0047.tar |
837598 | set Bird Silhouette Wall Art | <p>set Bird Silhouette Wall Art</p> | [] | Art & Design > Wall-mounted | [
"837598/images/image_1_compressed.jpg"
] | [
"837598/stls/Bird Silhouette Wall Art (1).stl",
"837598/stls/Bird Silhouette Wall Art (2).stl",
"837598/stls/Bird Silhouette Wall Art.stl"
] | CC0 | https://www.printables.com/model/837598 | data_0047.tar |
846734 | set Floral Minimalist Line Wall Art | <p>set Floral Minimalist Line Wall Art</p> | [] | Art & Design > Wall-mounted | [
"846734/images/image_1_compressed.jpg"
] | [
"846734/stls/set Floral Minimalist Line Wall Art.stl"
] | CC0 | https://www.printables.com/model/846734 | data_0047.tar |
102782 | Set of trophies | [
"cup",
"trophy",
"trophycup",
"cups",
"trophies"
] | Art & Design > Other Art & Designs | [
"102782/images/image_1_compressed.jpg"
] | [
"102782/stls/trophy#1.stl",
"102782/stls/trophy#1_mc.stl",
"102782/stls/trophy#2.stl",
"102782/stls/trophy#2_mc.stl",
"102782/stls/trophy#3.stl",
"102782/stls/trophy#3_mc.stl"
] | CC-BY | https://www.printables.com/model/102782 | data_0047.tar | |
436207 | Sew-on patches - random assortment | <p>I made a few examples of what can you make with my blank patches. I remixed a few designs I found here and made a few myself. There is a photo of a few I already sewed onto my backpack a couple of weeks ago, and they are holding up great.</p><p>Print at 0.2 mm layer height.</p><p>Blanks can be found here: <a href="h... | [
"accessory",
"patch",
"sewon",
"patches",
"backpackpatch"
] | Costumes & Accessories > Other Costume Accessories | [
"436207/images/image_1_compressed.jpg",
"436207/images/image_2_compressed.jpg"
] | [
"436207/stls/3Dprinter_patch.stl",
"436207/stls/Creeper_patch.stl",
"436207/stls/FloppyDisk_patch.stl",
"436207/stls/IdRatherPrintOne_Patch.stl",
"436207/stls/Nerd_patch.stl",
"436207/stls/Overwatch_patch.stl",
"436207/stls/Pentagram_patch.stl",
"436207/stls/PixelHeart_patch.stl",
"436207/stls/Pixel... | CC-BY | https://www.printables.com/model/436207 | data_0047.tar |
129907 | sewing bobbin / canette de couture | <p>Sewing bobbin, printable without supports.<br>The two parts fit together with a slack-free fit.</p><p>The dimensions correspond to those of the sewing bobbins supplied with my Bernette Chicago 7.
</p><p>Printing Tips: <br>* no supports <br>* PLA <br>*0.2mm layer height<br><br>#######<br><br>Canette de... | [
"sewing",
"bobbin",
"sewingspool",
"canette"
] | Hobby & Makers > Tools | [
"129907/images/image_1_compressed.jpg"
] | [
"129907/stls/p1.stl",
"129907/stls/p2.stl"
] | CC0 | https://www.printables.com/model/129907 | data_0047.tar |
105349 | Sewing machine pedal support | <p>Un support pour pédale de machine à coudre à fixer sur un meuble ou un mur pour faciliter le rangement. Pour vis à bois M3.<br><i>A support for the pedal of sewing machine, to be set on a wall or the sewing console itself. For M3 wood screws.</i></p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>DAG... | [
"support",
"pedal",
"sewingmachine",
"thingiverse",
"couture",
"pedale"
] | Household > Office | [
"105349/images/image_1_compressed.jpg",
"105349/images/image_2_compressed.jpg",
"105349/images/image_3_compressed.jpg"
] | [
"105349/stls/Support_Pédale_Machine_a_coudre.stl"
] | CC-BY | https://www.printables.com/model/105349 | data_0047.tar |
740959 | Sewing Machine Scissor Mount | [
"mount",
"sewing",
"sewingmachine",
"scissors",
"scissorholder"
] | Hobby & Makers > Tools | [
"740959/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/740959 | data_0047.tar | |
1106128 | sewing machine spool holder | <p>Just another brother sewing machine spool holder. This one is just the medium sized one hat comes in the set.</p> | [
"brother",
"spoolholdersewing"
] | Household > Other House Equipment | [
"1106128/images/image_1_compressed.jpg"
] | [
"1106128/stls/holder-sewing-machine-spool- medium sized.stl"
] | CC-BY | https://www.printables.com/model/1106128 | data_0047.tar |
361102 | Sewing machine thread spool blocker | <p>A simple thread blocker, that is placed in front of the spool, so that it does not fall off the machine.</p> | [
"spoolholder",
"sewing",
"sewingmachine",
"threadspool",
"threadspoolholder"
] | Hobby & Makers > Tools | [
"361102/images/image_1_compressed.jpg",
"361102/images/image_2_compressed.jpg",
"361102/images/image_3_compressed.jpg"
] | [
"361102/stls/thread spool blocker.stl"
] | CC0 | https://www.printables.com/model/361102 | data_0047.tar |
258796 | Sewing Pin Container | <p>Printed at .2 layer height with no support or adhesion. Performed a color swap to get the spool a different color than the thread.</p> | [] | Fashion > Other Fashion Accessories | [
"258796/images/image_1_compressed.jpg",
"258796/images/image_2_compressed.jpg"
] | [
"258796/stls/SewingPinContainer.stl"
] | CC0 | https://www.printables.com/model/258796 | data_0047.tar |
817345 | Sewing Spool Adapter | <p>An adapter for large spools. It allows a large spool to be put on a regular spool peg. It fit every large spool I had acces to.</p> | [
"sewing",
"sewingspool"
] | Hobby & Makers > Other Ideas | [
"817345/images/image_1_compressed.jpg",
"817345/images/image_2_compressed.jpg"
] | [
"817345/stls/spool adapter.stl"
] | CC-BY | https://www.printables.com/model/817345 | data_0047.tar |
297578 | Sewing Yarn Adapter | [
"spool",
"adapter",
"sewing",
"sewingmachine",
"improvement",
"yarn",
"sewingyarn"
] | Household > Other House Equipment | [
"297578/images/image_1_compressed.jpg",
"297578/images/image_2_compressed.jpg"
] | [
"297578/stls/Sewing yarn adapter.stl"
] | CC0 | https://www.printables.com/model/297578 | data_0047.tar | |
1110207 | SFF Mini ITX Case | <p><strong>UPDATE: I uploaded the v2 of this model, easier to print and assembly. Compatibility with 3 fans 92 and 80 mm (</strong><a href="https://www.printables.com/model/1418810-sff-mini-itx-case-v2">SFF Mini ITX Case v2 by jagondela | Download free STL model | Printables.com</a><strong>)</strong></p><p><strong>UPDA... | [
"case",
"pc",
"pccase",
"sff",
"sffpc",
"sffcase",
"sffpcie"
] | Gadgets > Computers | [
"1110207/images/image_1_compressed.jpg",
"1110207/images/image_2_compressed.jpg",
"1110207/images/image_3_compressed.jpg",
"1110207/images/image_4_compressed.jpg",
"1110207/images/image_5_compressed.jpg"
] | [
"1110207/stls/PC_Case_sidepanel.stl",
"1110207/stls/PC_Case_v2.stl"
] | CC-BY | https://www.printables.com/model/1110207 | data_0047.tar |
659275 | SG90 SERVO HORN | [
"diy",
"toolholder",
"diyelectronics",
"servo",
"servosg90"
] | 3D Printers > Accessories | [
"659275/images/image_1_compressed.jpg"
] | [
"659275/stls/SG90_HORN.stl",
"659275/stls/SG90_HORN_LOOSER.stl",
"659275/stls/SG90_HORN_TIGHTER.stl"
] | CC0 | https://www.printables.com/model/659275 | data_0047.tar | |
1016163 | Shackle for Gravity/Grappling Hook M4 | <p>I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw.</p><p>I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I had lying around, but you could also go for a longer one since it has thr... | [
"hardware",
"petg",
"m4",
"shackle"
] | Sports & Outdoor > Outdoor Sports | [
"1016163/images/image_1_compressed.jpg",
"1016163/images/image_2_compressed.jpg",
"1016163/images/image_3_compressed.jpg"
] | [
"1016163/stls/Shackle.stl"
] | CC-BY | https://www.printables.com/model/1016163 | data_0047.tar |
554249 | Shaft 2.9x8.5 | It was really hard to source the Shaft 2.9x8.5 for the cassettes so I made some in Prusa Slicer. | Download free 3D printable STL models | [
"bearing",
"mmu3",
"shaft"
] | 3D Printers > Other Printer Parts & Upgrades | [
"554249/images/image_1_compressed.jpg"
] | [
"554249/stls/Shaft29x85.stl"
] | CC0 | https://www.printables.com/model/554249 | data_0047.tar |
902173 | ShakerSiphonMoto | <p>This is for carrying on a motorcycle.</p><p>It's flow rate is rather low of course, but when one needs to transfer a bit of fuel to a friend, then it's going to be invaluable. </p><p>It takes way less space than a spare fuel container. I drilled and inserted a small bit of wire into it, because who want'... | [
"pump",
"siphon",
"siphonstarter",
"shakersiphon"
] | Hobby & Makers > Automotive | [
"902173/images/image_1_compressed.jpg"
] | [
"902173/stls/TinyShakerSiphon.stl"
] | CC-BY | https://www.printables.com/model/902173 | data_0047.tar |
511691 | Shark Coming out of Water | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250</p><p>Patrons have access to all my files in one place, a request board, as well as commercial options! Come check it out :-)<... | [
"water",
"shark"
] | Tabletop Miniatures > Characters & Monsters | [
"511691/images/image_1_compressed.jpg"
] | [
"511691/stls/Giant Shark Coming out of Water presupported.stl",
"511691/stls/Giant Shark Coming out of Water.stl"
] | CC-BY | https://www.printables.com/model/511691 | data_0047.tar |
774453 | Shark Cordless Vacuum Accessories Mount | <p>Printed with Overture PLA, Standing up with tree support and 15% Infill.</p><p>will also include the solidworks file so feel free to manipulate the part as you wish. </p><figure class="image image_resized image-style-align-center" style="width:15.89%;"><img src="https://media.printables.com/media/prints/774453/... | [
"organizer",
"mount",
"vacuum"
] | Household > Other House Equipment | [
"774453/images/image_1_compressed.jpg",
"774453/images/image_2_compressed.jpg"
] | [
"774453/stls/Shark Vacuum Accessories Holder.stl"
] | CC0 | https://www.printables.com/model/774453 | data_0047.tar |
686162 | Shark vacuum wall mount - two tools | [] | Household > Other House Equipment | [
"686162/images/image_1_compressed.jpg"
] | [
"686162/stls/shark_wandhalter-2er.stl"
] | GPL3.0 | https://www.printables.com/model/686162 | data_0047.tar | |
604169 | sharp corner protector | <p>flipping upside down in your slicer makes it faster i think</p><p> </p> | [
"safety",
"safe",
"corner"
] | Healthcare > Home Medical Tools | [
"604169/images/image_1_compressed.jpg"
] | [
"604169/stls/corner protector (1).stl"
] | GPL2.0 | https://www.printables.com/model/604169 | data_0047.tar |
252548 | Sharpie lightsabers | <p>Easy to print, no supports required. You might want to print with a brim, because there is not a lot on area touching the bed. </p> | [] | Toys & Games > Other Toys & Games | [
"252548/images/image_1_compressed.jpg"
] | [
"252548/stls/Part Studio 1 - Lightsaber 1.stl",
"252548/stls/Part Studio 1 - lightsaber 2.stl"
] | CC-BY | https://www.printables.com/model/252548 | data_0047.tar |
982687 | Shars Dial Test Indicator DTI Gridfinity | <p>Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg<br>Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC</p> | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"982687/images/image_1_compressed.jpg"
] | [
"982687/stls/Gridfinity Shars DTI.stl"
] | BSD | https://www.printables.com/model/982687 | data_0047.tar |
842351 | Shaving Soap Bowl / Mug | <p>A shaving bowl or mug is a superb addition to the traditional wet shaving routine, offering a seamless and convenient method to whip up a rich lather using your preferred shaving brush.</p><p><br>Opting for a 3D printed version reduces the risk of it shattering upon hitting your tile floor if accidentally dropped.</... | [
"man",
"bowl",
"bathroom",
"razor",
"soap",
"mug",
"shave",
"shaving",
"bathroomaccessories",
"lather",
"bathroomaccessory",
"razorscraper",
"lathering"
] | Household > Bathroom | [
"842351/images/image_1_compressed.jpg",
"842351/images/image_2_compressed.jpg",
"842351/images/image_3_compressed.jpg",
"842351/images/image_4_compressed.jpg"
] | [
"842351/stls/Shave Soap Bowl.stl"
] | CC-BY | https://www.printables.com/model/842351 | data_0047.tar |
779619 | Shaving Stand - Henson AL13 - Safety Razor | <p>A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: <a href="https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box">https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box</a>&nb... | [
"razorblade",
"razorholder",
"razorstand",
"sharps",
"shaving",
"safetyrazor",
"sharpsdisposal",
"shavingstand",
"al13",
"hensonshaving"
] | Household > Bathroom | [
"779619/images/image_1_compressed.jpg",
"779619/images/image_2_compressed.jpg",
"779619/images/image_3_compressed.jpg",
"779619/images/image_4_compressed.jpg",
"779619/images/image_5_compressed.jpg",
"779619/images/image_6_compressed.jpg",
"779619/images/image_7_compressed.jpg"
] | [
"779619/stls/HSAL13Stand.stl",
"779619/stls/SimpleBase2.stl"
] | CC-BY | https://www.printables.com/model/779619 | data_0047.tar |
489075 | Sheet holder for original Prusa Enclosure with LED | <p><strong>Description</strong></p><p>I have the LCD in my enclosure which uses the screew holes on the left side of the enclosure. Which meant many of the sheet holders won't work. This one will work on the Right or Left</p><p><strong>Hardware need: </strong></p><ul><li>4 x M3x8 screw</li><li>4 x M3nS nut also kn... | [] | 3D Printers > Prusa Parts & Upgrades | [
"489075/images/image_1_compressed.jpg"
] | [
"489075/stls/Sheet Holder Left.stl",
"489075/stls/Sheet Holder.stl"
] | CC0 | https://www.printables.com/model/489075 | data_0047.tar |
107899 | Sheikah Bookmark | <p>Designed by Michael Dansie. This bookmark is meant to be printed as a single two-color piece, on a single-extruder printer, with a lot of ironing.</p> | [] | Gadgets > Other Gadgets | [
"107899/images/image_1_compressed.jpg",
"107899/images/image_2_compressed.jpg"
] | [
"107899/stls/sheikah-bookmark.stl"
] | CC-BY | https://www.printables.com/model/107899 | data_0047.tar |
223229 | Sheikah Slate: The Legend of Zelda botw | [
"easytoprint",
"thelegendofzelda",
"sheikahslate"
] | Toys & Games > Action Figures & Statues | [
"223229/images/image_1_compressed.jpg",
"223229/images/image_2_compressed.jpg",
"223229/images/image_3_compressed.jpg",
"223229/images/image_4_compressed.jpg"
] | [
"223229/stls/Sheikah slate The Legend of Zelda botw.stl"
] | CC-BY | https://www.printables.com/model/223229 | data_0047.tar | |
168798 | Sheldon (Inspired by Garfield) | <p>Inspired by Sheldon from Garfield.</p><p>https://garfield.fandom.com/wiki/Sheldon</p><p>A chicken which did not hatch completely.</p><p> </p><p>Edit:</p><p>Added the egg file “ei_v2.0” fliced in 2 parts for easier printing. Needs to be glued.</p> | [
"easter",
"easteregg",
"egg"
] | Seasonal designs > Spring & Easter | [
"168798/images/image_1_compressed.jpg",
"168798/images/image_2_compressed.jpg",
"168798/images/image_3_compressed.jpg"
] | [
"168798/stls/ei.stl",
"168798/stls/ei_v2.0.stl",
"168798/stls/li.stl",
"168798/stls/re.stl",
"168798/stls/sheldon complete.stl"
] | CC-BY | https://www.printables.com/model/168798 | data_0047.tar |
1439432 | Shelf Bracket for 200x18 mm Wood plank | <p>I've designed a shelf to raise my coffe equipment. I've used a pine plank, 200mm width, 18mm height and fits perfectly. It is very stable and can be done in any length size. The example I have is a 38cm plank, I think it should hold fine until around 1 meter long. </p><p>If requested, I can make another bracket... | [
"shelf",
"bracket",
"shelfbracket",
"monitorstand",
"shelfsupport",
"monitorshelf"
] | Household > Other House Equipment | [
"1439432/images/image_1_compressed.jpg",
"1439432/images/image_2_compressed.jpg",
"1439432/images/image_3_compressed.jpg",
"1439432/images/image_4_compressed.jpg"
] | [
"1439432/stls/arm_honeycomb.stl"
] | CC0 | https://www.printables.com/model/1439432 | data_0047.tar |
1105602 | Shelf brackets with French Cleat Mount | <p>I needed some shelf space in my office, and I have been fascinated by French cleat mounting systems, so I came up with this simple design that provides a strong mount and hides the mounting screws.</p><p>I probably over engineered it with 6 walls and 25% infill. But it does seem sturdy and came out far better than I... | [
"shelf",
"storage",
"bracket",
"shelfbracket",
"frenchcleat"
] | Household > Home Decor | [
"1105602/images/image_1_compressed.jpg",
"1105602/images/image_2_compressed.jpg",
"1105602/images/image_3_compressed.jpg",
"1105602/images/image_4_compressed.jpg",
"1105602/images/image_5_compressed.jpg"
] | [
"1105602/stls/A1 Mini - SB3.5 - 3.5 inch Shelf.stl",
"1105602/stls/A1 Mini - SB4 - 4 inch Shelf.stl",
"1105602/stls/A1 Mini - SB4.5 - 4.5 Shelf.stl",
"1105602/stls/A1 Mini - SB5 - 5 inch Shelf.stl",
"1105602/stls/A1 Mini - SB5.5 - 5.5 inch - Shelf..stl",
"1105602/stls/A1 Mini - SB6 - 6 inch Shelf..stl",
... | CC0 | https://www.printables.com/model/1105602 | data_0047.tar |
418010 | Shelf clip for Ikea DETOLF glass display | <p>This thing adds secure clips to your Ikea DETOLF glass display cabinet. The stock product only provides little rubber bumpers to provide minimal sound and vibration protection. A significant bump to the cabinet will have your glass shelves come crashing down on your precious items. (Guess how I know this.)</p><p>The... | [
"ikea",
"ikeadetolf"
] | Household > Home Decor | [
"418010/images/image_1_compressed.jpg",
"418010/images/image_2_compressed.jpg"
] | [
"418010/stls/ikea-display-clip.stl"
] | CC-BY | https://www.printables.com/model/418010 | data_0047.tar |
6059 | Shelf Filament Spool Holder (Single or MMU) | <p>A filament spool holder that you can hang from the front of a shelf.</p>
<p>Updated Feb 2020: Extended the connection to the shelf so it stays better. Added holes in several places so you can secure to a shelf in many ways.</p>
<p>Tip: Print using the spool color you plan to hang, then add the filament type to the... | [
"spool",
"holder",
"filament"
] | 3D Printers > Accessories | [
"6059/images/image_1_compressed.jpg",
"6059/images/image_2_compressed.jpg"
] | [
"6059/stls/spool-holder-left-long.stl",
"6059/stls/spool-holder-left-short.stl",
"6059/stls/spool-holder-left.stl",
"6059/stls/spool-holder-right-long.stl",
"6059/stls/spool-holder-right-short.stl",
"6059/stls/spool-holder-right.stl"
] | CC0 | https://www.printables.com/model/6059 | data_0047.tar |
459646 | Shelf Holder | <p>easy to print and strong shelf holder for inside closets.</p><p>Print details:</p><p>-Supports; Yes</p><p>-PLA</p><p>-200° nozzle</p><p>-50° Bed</p><p>-0.2mm </p> | [
"shelf",
"holder",
"closet"
] | Household > Bedroom | [
"459646/images/image_1_compressed.jpg",
"459646/images/image_2_compressed.jpg"
] | [
"459646/stls/shelf holder-shelf_holder.stl"
] | CC-BY | https://www.printables.com/model/459646 | data_0047.tar |
728222 | Shelf legs | <p>Dimensions: 32x32x5 cm</p><p>Screw hole diameters: head 8 mm, screw 4 mm</p><p>Printed using PLA, 0.3 mm layer, 20% octet infill, 3 walls, 3 top/bottom layers</p> | [
"support",
"furniture",
"legs",
"nohy",
"nabytek"
] | Household > Other House Equipment | [
"728222/images/image_1_compressed.jpg",
"728222/images/image_2_compressed.jpg",
"728222/images/image_3_compressed.jpg"
] | [
"728222/stls/nohy.stl"
] | CC-BY | https://www.printables.com/model/728222 | data_0047.tar |
805040 | shelf support for 4mm flat head wood screw | <p>A small shelf support designed to used with 4mm wood screw. The support is 20mm thick, 70mm long. It prints on its default orientation, only the large hole requires supports, the small holes were designed to print without supports.</p> | [
"support",
"woodworking",
"shelfbracket",
"shelfmount"
] | Hobby & Makers > Mechanical Parts | [
"805040/images/image_1_compressed.jpg",
"805040/images/image_2_compressed.jpg"
] | [
"805040/stls/equerre.stl"
] | CC0 | https://www.printables.com/model/805040 | data_0047.tar |
808216 | Shell Model | <p>This model is 3D Scanned by me and then touched up a little bit using blender.</p><p>If you like my 3D Scanned models, consider joining my club for more.</p><p> </p><p>If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for... | [
"shell",
"3dscan",
"3dscanning",
"3dscaned"
] | Art & Design > Sculptures | [
"808216/images/image_1_compressed.jpg",
"808216/images/image_2_compressed.jpg",
"808216/images/image_3_compressed.jpg"
] | [
"808216/stls/shell.stl"
] | GPL3.0 | https://www.printables.com/model/808216 | data_0047.tar |
856087 | Shelly BLU H&T HT Temperature Sensor Holder Wall Mount | <p>I finally got my hands on the new Shelly Outside compatible Temperature Sensor, namely: Shelly Blu H&T.</p><p>I don't like gluing them straight to the walls, because the battery replacement gets harder. Plus i do not want to ruin the Shelly with glue marks.</p><p>Therefor this STL was born. Took a pic, imported ... | [
"wall",
"holder",
"case",
"mount",
"temperature",
"smart",
"outside",
"shelly",
"blu",
"ht"
] | Hobby & Makers > Electronics | [
"856087/images/image_1_compressed.jpg",
"856087/images/image_2_compressed.jpg"
] | [
"856087/stls/Shelly BLU HT Body.stl",
"856087/stls/Shelly BLU HT Case.stl"
] | GPL3.0 | https://www.printables.com/model/856087 | data_0047.tar |
756579 | Shelly BLU Motion Stand (Flexible) | <p>Modular holder/stand with ball joint for the BLU Motion from Shelly</p><ul><li>two different bases with thread and nut</li><li>holder with rectangular profile with ball for insertion, in 4 lengths</li><li>holder with round profile in 3 lengths</li></ul><p>No Support</p><p>===</p><p>Modularer Halter/Ständer mit Kugel... | [
"holder",
"stand",
"motionsensor",
"shelly",
"shellyblumotion"
] | Hobby & Makers > Electronics | [
"756579/images/image_1_compressed.jpg",
"756579/images/image_2_compressed.jpg",
"756579/images/image_3_compressed.jpg"
] | [
"756579/stls/Shelly_BLU_Motion_Stand_2_Base_A.stl",
"756579/stls/Shelly_BLU_Motion_Stand_2_Base_B.stl",
"756579/stls/Shelly_BLU_Motion_Stand_2_Holder_A_L.stl",
"756579/stls/Shelly_BLU_Motion_Stand_2_Holder_A_M.stl",
"756579/stls/Shelly_BLU_Motion_Stand_2_Holder_A_S.stl",
"756579/stls/Shelly_BLU_Motion_Sta... | CC-BY | https://www.printables.com/model/756579 | data_0047.tar |
999921 | Sherpa Mini with ECAS and Integrated Filament Sensor for ERCF(v2) based on the Filametrix Solution | <p>Following the <a href="https://github.com/Annex-Engineering/Sherpa_Mini-Extruder/blob/master/Print_Settings_and_File_Key.txt">print settings specified in the Sherpa Mini github</a>, print the main body, idler arm, and front cover. Also print the stock rear housing from the <a href="https://github.com/Annex-Engineeri... | [
"extruder",
"mmu",
"mini",
"sensor",
"filamentsensor",
"sherpa",
"sherpamini",
"ercf",
"sherpaminiextruder",
"enragedrabbit",
"toolheadsensor",
"filametrix",
"ercfv2"
] | 3D Printers > Voron Parts & Upgrades | [
"999921/images/image_1_compressed.jpg",
"999921/images/image_2_compressed.jpg"
] | [
"999921/stls/Body with Bowden bottom.stl",
"999921/stls/Front cover.stl",
"999921/stls/Idler arm longer.stl"
] | GPL3.0 | https://www.printables.com/model/999921 | data_0047.tar |
838962 | Shih-TZU | <p>Wall art decoration with motif of Shih-Tzu dog</p> | [
"decoration",
"dog",
"home",
"shihtzu"
] | Art & Design > 2D Plates & Logos | [
"838962/images/image_1_compressed.jpg"
] | [
"838962/stls/Shi-Tzu.stl"
] | CC0 | https://www.printables.com/model/838962 | data_0047.tar |
48309 | Shimano Bleed Cup (no support) + Clamp | <p>This is a set to bleed shimano hydraulic brakes.<br>Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper</p><p>I also have one as a version with a flat bottom, which needs support ( <a href="https://www.printables.com/model/41591-shimano-bleed-cup-clamp">https://www.prusaprinters.org/p... | [
"repair",
"bicycle",
"bike",
"brakebleeder"
] | Sports & Outdoor > Outdoor Sports | [
"48309/images/image_1_compressed.jpg",
"48309/images/image_2_compressed.jpg",
"48309/images/image_3_compressed.jpg"
] | [
"48309/stls/cup_no_suport.stl",
"48309/stls/hoseclamp.stl"
] | CC-BY | https://www.printables.com/model/48309 | data_0047.tar |
650614 | Shimano derailleur cage lock tool | [
"tool",
"shimano",
"mtb",
"xtr",
"cage",
"derailleur",
"m8100",
"xt",
"slx",
"m6100",
"m7100",
"m9100"
] | Hobby & Makers > Tools | [
"650614/images/image_1_compressed.jpg"
] | [
"650614/stls/Shimano_Cage_Lock.stl"
] | CC0 | https://www.printables.com/model/650614 | data_0047.tar | |
307217 | Shimano pedal tool | <p>Wrench to unscrew the Shimano pedal cassette</p> | [] | Hobby & Makers > Tools | [
"307217/images/image_1_compressed.jpg"
] | [
"307217/stls/Shimano pedal tool.stl"
] | CC0 | https://www.printables.com/model/307217 | data_0047.tar |
563422 | Shimano Saint / Zee piston cleaning block | <p>This block can be used to clean Shimano Saint / Zee pistons. You can push out single pistons by positioning the block in 4 possible ways and then clean and lube the pistons. Recommending good infill and wall count, brakes are quite powerfull. ;]</p> | [
"shimano",
"bleedblock"
] | Hobby & Makers > Tools | [
"563422/images/image_1_compressed.jpg"
] | [
"563422/stls/saint-zee.stl"
] | CC-BY | https://www.printables.com/model/563422 | data_0047.tar |
544420 | Shipping Label Printer Roll Stand | <p>Bought my wife a shipping label printer and a couple rolls of labels. I took the opportunity to make a holder. I designed this with simplicity in mind, one piece that when printed twice can interlock with itself to form the holder. Should also make it easy for changing rolls out.</p>
Category: 3D Printing | [
"printer",
"stand",
"label",
"roll",
"thingiverse",
"shipping"
] | Hobby & Makers > Other Ideas | [
"544420/images/image_1_compressed.jpg",
"544420/images/image_2_compressed.jpg",
"544420/images/image_3_compressed.jpg"
] | [
"544420/stls/Label_Printer_Roll_Stand.stl"
] | CC-BY | https://www.printables.com/model/544420 | data_0047.tar |
903420 | Shitbox - Keychain | [
"funny",
"car",
"keychain",
"key",
"keyring",
"shitbox"
] | Art & Design > 2D Plates & Logos | [
"903420/images/image_1_compressed.jpg"
] | [
"903420/stls/Shitbox.stl"
] | CC-BY | https://www.printables.com/model/903420 | data_0047.tar | |
24316 | Shop Keyboard Holder | <p>The keyboard for my shop PC collects too much grime when it sits on a horizontal surface. I created a holder to store it veritically and out of the way.</p>
<h3>Print instructions</h3><p>Category: Tool Holders & Boxes</p> | [
"computer",
"workshop",
"thingiverse",
"keybord"
] | Hobby & Makers > Organizers | [
"24316/images/image_1_compressed.jpg",
"24316/images/image_2_compressed.jpg",
"24316/images/image_3_compressed.jpg"
] | [
"24316/stls/keyboard_holder_v1.stl"
] | CC-BY | https://www.printables.com/model/24316 | data_0047.tar |
273073 | Shop Protection Wall Holder | <p>I constantly misplace my headphones, protective glasses, and my mask. To combat this, I created this model to hold all of my protective gear while I am in my shop. </p><h4>Printing:</h4><p>To print this item, I used PETG on my Prusa MKS III+s with some supports. I tried to limit the number of supports needed.</... | [
"workshop",
"headphoneholder",
"workshoporganization",
"eyeglassholder"
] | Hobby & Makers > Tools | [
"273073/images/image_1_compressed.jpg",
"273073/images/image_2_compressed.jpg",
"273073/images/image_3_compressed.jpg",
"273073/images/image_4_compressed.jpg",
"273073/images/image_5_compressed.jpg",
"273073/images/image_6_compressed.jpg",
"273073/images/image_7_compressed.jpg",
"273073/images/image_8... | [
"273073/stls/Protection Holder v3.stl"
] | CC-BY | https://www.printables.com/model/273073 | data_0047.tar |
58664 | shoping cart token (žeton do nákupního vozíku) | <p>Token to shoping cart token. From pla works well.</p><p> </p><p>Size can be easily change in slicer.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/58664/rich_content/b383a537-2701-4f38-ac08-cd43d84fe840/vystrizek.png#%7B%22... | [] | Gadgets > Other Gadgets | [
"58664/images/image_1_compressed.jpg",
"58664/images/image_2_compressed.jpg",
"58664/images/image_3_compressed.jpg",
"58664/images/image_4_compressed.jpg"
] | [
"58664/stls/shopping cart token.stl"
] | CC-BY | https://www.printables.com/model/58664 | data_0047.tar |
303889 | Shopping Cart Coin for Keychain, easy removable | <p>Size of the coin is 27.4mm x 2.15mm (size of a 2 Swiss Franc coin), you can adjust the coin size (with the lock) in Slicer by scaling to fit the coin size you can use in your country.</p><p><strong>Use PETG / no support!</strong></p> | [
"coin",
"keychain",
"shopping",
"cart"
] | Hobby & Makers > Other Ideas | [
"303889/images/image_1_compressed.jpg",
"303889/images/image_2_compressed.jpg"
] | [
"303889/stls/Coin.stl",
"303889/stls/Lock_V2.stl"
] | CC-BY | https://www.printables.com/model/303889 | data_0047.tar |
284660 | Shopping Cart Coin Keychain (Canadian) | <p>Shopping Cart Coin Keychain (Canadian)</p><p>Loonie</p><p>Quarter</p> | [] | Hobby & Makers > Tools | [
"284660/images/image_1_compressed.jpg"
] | [
"284660/stls/Shopping Cart Coin Keychains.stl"
] | CC-BY | https://www.printables.com/model/284660 | data_0047.tar |
273620 | Shopping Cart Euro Token (OpenSCAD) | <p>In 2022 there are still supermarkets that need a euro coin in their shopping cart. I wanted to have an abundance of tokens, so I can always find one.</p><p>There are many 3D coins/tokens for shopping carts, but I could not find a strong token made in OpenSCAD. I decided to make one myself.</p><p>The 3mf file and the... | [
"coin",
"euro",
"keychain",
"key",
"token",
"openscad",
"shopping",
"cart",
"shoppingcart",
"trolley"
] | Art & Design > 2D Plates & Logos | [
"273620/images/image_1_compressed.jpg",
"273620/images/image_2_compressed.jpg"
] | [
"273620/stls/Shopping Cart Euro Token.stl"
] | CC0 | https://www.printables.com/model/273620 | data_0047.tar |
219784 | Shopping coin | [
"shopping",
"cart"
] | Art & Design > Other Art & Designs | [
"219784/images/image_1_compressed.jpg"
] | [
"219784/stls/shoping coin v1.stl"
] | CC0 | https://www.printables.com/model/219784 | data_0047.tar | |
734961 | Shopping trolley token CZ | <p>The tool can be removed from the slot immediately after unclipping the trolley, does not get trapped inside. Print in PETG.</p> | [
"token",
"shopping",
"shoppingcart",
"shoppingcartcoin",
"shoppingtrolleycoin",
"shoppingtrolley",
"shoppingcarttoken",
"trolleytoken",
"trolleycoinunlocker",
"trolleykey",
"trolleycoins"
] | Gadgets > Other Gadgets | [
"734961/images/image_1_compressed.jpg"
] | [
"734961/stls/Shopping trolley token.stl"
] | CC-BY | https://www.printables.com/model/734961 | data_0047.tar |
200509 | Shopping Trolley Token sized for UK | <p>Resized to be a little smaller than a £1 coin at the head, this works great for releasing a shopping trolley in the UK. Just poke in and retract immediately. No need to take it off your keyring.</p><p>Update 25/01/2022</p><p>Added a trolly token with the Animal Crossing bells symbol.</p><p> </p><p>Update 30/10/... | [
"shoppingcartcoin",
"shoppingtoken",
"shoppingtrolleycoin",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"200509/images/image_1_compressed.jpg",
"200509/images/image_2_compressed.jpg",
"200509/images/image_3_compressed.jpg",
"200509/images/image_4_compressed.jpg"
] | [
"200509/stls/Duck Token.stl",
"200509/stls/Ghost Token.stl",
"200509/stls/Shopping_Trolley_-_AC_Bell.stl",
"200509/stls/Shopping_Trolley_Token_sized_for_UK.stl"
] | CC-BY | https://www.printables.com/model/200509 | data_0047.tar |
1395938 | Short Adjustable GPU Support 25-40mm | <p>Supports a range of 25-40mm</p><p><br>Unfortunately, the support that my XTX 7900 came with was too big to attach, and thus I had to look elsewhere for solution. I found a lot of great options on here - unfortunately many of them were too tall for my small chassis and thus I decided to make a smaller option for thos... | [
"holder",
"support",
"nvidia",
"gpu",
"chassis",
"rtx",
"nzxt",
"amd",
"stander",
"gpusupport",
"radeon",
"xtx"
] | Gadgets > Computers | [
"1395938/images/image_1_compressed.jpg"
] | [
"1395938/stls/Base.stl",
"1395938/stls/Fastener.stl"
] | GPL3.0 | https://www.printables.com/model/1395938 | data_0047.tar |
1450411 | Shorter Voron/Monolith pulley dehubbing tool | <p>Stock Voron/Monolith BOM does not include M5x50 SHCS. The original model was a shy too long to use M5x40 SHCS, which should already be on hand.</p><p>V2-beta changes:</p><ul><li><p>Choice to use an M5 T-nut instead of an M5 hex nut to increase contact area.</p></li><li><p>Changed the design such that the nut housing... | [] | 3D Printers > Voron Parts & Upgrades | [
"1450411/images/image_1_compressed.jpg"
] | [
"1450411/stls/dehubbing-tool-M5x40-SHCS.stl"
] | GPL3.0 | https://www.printables.com/model/1450411 | data_0047.tar |
543381 | Shorty knife cover | <p>I'm really in love with the design of the "shorty utility knife". But unfortunately there is no cover for it. So i designed my own. You can print it with the same settings as the knife. So choose your infill pattern, increase the perimeters and set the top/bottom layers to zero. Or you can print it solid. Now you ca... | [
"blade",
"knife",
"cover",
"sheet",
"shorty"
] | Household > Outdoor & Garden | [
"543381/images/image_1_compressed.jpg",
"543381/images/image_2_compressed.jpg"
] | [
"543381/stls/Shorty_Cover.stl"
] | CC-BY | https://www.printables.com/model/543381 | data_0047.tar |
186751 | Shotshell Box Holder | <p>Belt holder for your ammunition cartridge box for trap shooting etc. Added a paddle style belt adapter (Tek-Lok).</p><p>Idea based on <a href="https://www.thingiverse.com/thing:1672155">https://www.thingiverse.com/thing:1672155</a>, however made it Bladetech Tek-Lok compatible.</p><p>Printable Tek-Lok here: <a href=... | [
"shotgun",
"shooting",
"12ga",
"thingiverse",
"competitiveshooting",
"shootingsports",
"targetshooting",
"shotgunshell",
"12gauge"
] | Sports & Outdoor > Other Sports | [
"186751/images/image_1_compressed.jpg",
"186751/images/image_2_compressed.jpg",
"186751/images/image_3_compressed.jpg",
"186751/images/image_4_compressed.jpg"
] | [
"186751/stls/Paddle_Adapter_Tek-Lok.stl",
"186751/stls/Shotshell_Box_Holder.stl"
] | CC-BY | https://www.printables.com/model/186751 | data_0047.tar |
379933 | Shovel holder | <p>Printed straight up no supports required</p> | [] | Household > Outdoor & Garden | [
"379933/images/image_1_compressed.jpg",
"379933/images/image_2_compressed.jpg"
] | [
"379933/stls/shovel holder.stl"
] | CC0 | https://www.printables.com/model/379933 | data_0047.tar |
94260 | shovel, paddle, scoop 150mm width | <p>a few modifications from Cat litter shovel by andrey_mikhaylov, mainly to fill holes an make it to print without supports and to make width 150mm</p><p> </p><h3>Print Settings</h3><p><strong>Supports:</strong></p><p>No</p><p><strong>Infill:</strong></p><p>25</p><p><strong>Notes: </strong></p><p>0.2 layer h... | [
"paddle",
"shovel",
"scoop",
"thingiverse",
"lopatka"
] | Household > Other House Equipment | [
"94260/images/image_1_compressed.jpg",
"94260/images/image_2_compressed.jpg",
"94260/images/image_3_compressed.jpg"
] | [
"94260/stls/mala_lopatka_-old.stl",
"94260/stls/shovel 150mm v2-new.stl"
] | CC-BY | https://www.printables.com/model/94260 | data_0047.tar |
220041 | Shower glass two side hook | [
"bathroom",
"shower",
"showerholder",
"showeraccessories",
"showerhook",
"bathroomaccessories",
"bathroomorganization",
"bathroomaccessory",
"bathroomtowelholder"
] | Household > Bathroom | [
"220041/images/image_1_compressed.jpg"
] | [
"220041/stls/hook 6mm glass.stl"
] | CC0 | https://www.printables.com/model/220041 | data_0047.tar | |
66798 | Shower hook | <p>The STL is for a shower rod with a 25 mm diameter, and the hook has a 10 mm diameter.<br>OpenSCAD file is included for your adjustments.</p> | [
"thingiverse",
"showeraccessories",
"showerhook"
] | Household > Bathroom | [
"66798/images/image_1_compressed.jpg"
] | [
"66798/stls/shower-hook.stl"
] | CC-BY | https://www.printables.com/model/66798 | data_0047.tar |
104880 | Shower jet 1/2 inch | <p>This is a simple jet that can be used with most 1/2 inch shower hoses. The jet can be useful for cleaning sieves or other bathroom accessories. The inner diameter is 2mm. Do not forget to use a gasket.</p> | [
"nozzle",
"jet",
"showeraccessories",
"showerhead"
] | Household > Bathroom | [
"104880/images/image_1_compressed.jpg",
"104880/images/image_2_compressed.jpg",
"104880/images/image_3_compressed.jpg"
] | [
"104880/stls/shower_jet_2mm_rounded.stl"
] | GPL3.0 | https://www.printables.com/model/104880 | data_0047.tar |
335634 | Shower Phone Stand | <p>Small phone shelf or phone mount that is very easy to print and works very well. Print with the back facing down.</p> | [
"shelf",
"wall",
"mount",
"strip",
"phone",
"pla",
"shower",
"command"
] | Household > Bathroom | [
"335634/images/image_1_compressed.jpg",
"335634/images/image_2_compressed.jpg",
"335634/images/image_3_compressed.jpg"
] | [
"335634/stls/Shower phone stand.stl"
] | CC-BY | https://www.printables.com/model/335634 | data_0047.tar |
1367479 | Shower Shelf 90 degrees | [] | Household > Bathroom | [
"1367479/images/image_1_compressed.jpg",
"1367479/images/image_2_compressed.jpg",
"1367479/images/image_3_compressed.jpg"
] | [
"1367479/stls/Shower shelf part1.stl",
"1367479/stls/Shower shelf part2.stl"
] | CC-BY | https://www.printables.com/model/1367479 | data_0047.tar | |
230621 | Shrinkage and exposure calibration piece for resin 3D printer | <p>This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and </p><p>You should print the test piece with regular settings flat on the build plate, let it properly cure, and measure it. Note... | [
"test",
"sla",
"resin",
"piece",
"exposure",
"shrinkage"
] | 3D Printers > Test Models | [
"230621/images/image_1_compressed.jpg",
"230621/images/image_2_compressed.jpg",
"230621/images/image_3_compressed.jpg",
"230621/images/image_4_compressed.jpg"
] | [
"230621/stls/moldPattern.stl",
"230621/stls/standalone.stl"
] | GPL3.0 | https://www.printables.com/model/230621 | data_0047.tar |
1441629 | Shrunken heads | <p>These two silent ones are designed to brighten up the atmosphere. <br><br>I printed them in PETG without supports, each head took about 2 hours. <br>The heads are approximately 80-85 mm tall. They also have holes for hanging ropes. The decorations (specifically in my case with my printer, I don't know how ... | [
"head",
"magic",
"witch",
"voodoo",
"sorcerer",
"shrunken",
"witchdoctor"
] | Costumes & Accessories > Props | [
"1441629/images/image_1_compressed.jpg",
"1441629/images/image_2_compressed.jpg"
] | [
"1441629/stls/Head1_item1.stl",
"1441629/stls/Head1_item2.stl",
"1441629/stls/Head1_main.stl",
"1441629/stls/Head2_item1_top.stl",
"1441629/stls/Head2_item2_bottom.stl",
"1441629/stls/Head2_main.stl"
] | CC-BY | https://www.printables.com/model/1441629 | data_0047.tar |
572660 | shuriken | <p>a ninja shuriken or throwing star</p> | [
"ninja",
"shuriken",
"throwingstar"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"572660/images/image_1_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/572660 | data_0047.tar |
1037022 | Shutter Box - Coffin | <p>A coffin-shaped case with a sliding shutter door!</p><figure class="media"><oembed url="https://www.youtube.com/embed/K73e3_xDkXA"></oembed></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=3nYm0oPaSr4"></oembed></figure><p> </p><h3>Options</h3><ul><li>Plain</li><li>Crack</li><li>Web</... | [
"case",
"coffin",
"pencilcase",
"shutter",
"rollingshutter"
] | Seasonal designs > Autumn & Halloween | [
"1037022/images/image_1_compressed.jpg"
] | [
"1037022/stls/Bottom - Plain.stl",
"1037022/stls/Bottom - Web.stl",
"1037022/stls/Demo - All Files.stl",
"1037022/stls/Shutter.stl",
"1037022/stls/Top - Bat - Insert.stl",
"1037022/stls/Top - Bat.stl",
"1037022/stls/Top - Cracked.stl",
"1037022/stls/Top - Plain.stl",
"1037022/stls/Top - Web.stl"
] | CC-BY | https://www.printables.com/model/1037022 | data_0047.tar |
264986 | shutter mechanism / iris | <p>assembly animation: <a href="https://www.instagram.com/p/ChpIqSooebQ/?igshid=YmMyMTA2M2Y=">https://www.instagram.com/p/ChpIqSooebQ/?igshid=YmMyMTA2M2Y=</a></p><p> </p><p>1x “<strong>shutter mechanism p11.3mf ”</strong></p><p>4x <strong> “blade p1-4.3mf”</strong></p><p>4x <strong> “b... | [
"mechanism",
"storage",
"iris",
"shutter"
] | Gadgets > Other Gadgets | [
"264986/images/image_1_compressed.jpg",
"264986/images/image_2_compressed.jpg"
] | [
"264986/stls/blade p1-4.stl",
"264986/stls/blade p5-8.stl",
"264986/stls/shutter mechanism p10.stl",
"264986/stls/shutter mechanism p11.stl",
"264986/stls/shutter mechanism p12.stl",
"264986/stls/shutter mechanism p9.stl"
] | CC0 | https://www.printables.com/model/264986 | data_0047.tar |
86471 | Sibeera - the simplest beer rack EVER! | <p>Meet Sibeera - the simplest beer rack EVER!</p><p>Put it in your fridge, so bottles stop rolling around. Fits 3 standard (longneck) 0.33l beer bottles or 3 0.5l bottles depending on the version printed.</p><p>I really love what you can do with spiral vase mode - This thing is meant to be printed FAST!<br>In case you... | [
"beer",
"fridge",
"rack",
"stacking"
] | Household > Kitchen | [
"86471/images/image_1_compressed.jpg",
"86471/images/image_2_compressed.jpg"
] | [
"86471/stls/sibeera-0.33-61mm.stl",
"86471/stls/sibeera-0.5-70mm.stl"
] | CC-BY | https://www.printables.com/model/86471 | data_0047.tar |
1018922 | Siboor Trident aux fan - Beefier Legs FIx | <p>made the legs thicker and stronger, added optional way to screw in 2 m4x40 screws in the center legs to increase strength even more! ( not needed though ) <br>rounded of some of the corners to be in line with the other curves<br>scaled object up by 0.6% to account for abs shrinkage and to allow my 12032 fans to... | [
"trident",
"voron",
"auxiliary",
"auxfan",
"siboor",
"trident300",
"trident250",
"12032fan",
"12032",
"trident350"
] | 3D Printers > Voron Parts & Upgrades | [
"1018922/images/image_1_compressed.jpg",
"1018922/images/image_2_compressed.jpg",
"1018922/images/image_3_compressed.jpg"
] | [
"1018922/stls/Body1.stl",
"1018922/stls/Body12.stl",
"1018922/stls/Body2.stl"
] | GPL3.0 | https://www.printables.com/model/1018922 | data_0047.tar |
514268 | Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses / Fuse puller | <p>Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses</p><p>Praktischer Helfer beim Sicherungsziehen bzw. setzen</p><ul><li>Konturen → 2</li><li>Decke → 5</li><li>Boden → 5</li><li>Erste Schicht → 0,2mm</li><li>Variable Schichthöhe</li><li>Stützen → Überall</li><li>Infill → 7%</li></ul> | [
"fuse",
"fuseholder",
"fusepuller"
] | Hobby & Makers > Electronics | [
"514268/images/image_1_compressed.jpg",
"514268/images/image_2_compressed.jpg",
"514268/images/image_3_compressed.jpg",
"514268/images/image_4_compressed.jpg",
"514268/images/image_5_compressed.jpg"
] | [
"514268/stls/SicherungszieherV2.stl"
] | CC0 | https://www.printables.com/model/514268 | data_0047.tar |
14933 | Sid Meier's Civilization: A New Dawn Box inset | <p>This is a organizer, storage for the Civilization: A New Dawn boardgame.<br/>
Every player have organizer and a tray for the given color.<br/>
There are tray with and without player logos.</p>
<p>The box contains three layer:</p>
<ul>
<li>4 player storage (inset_player), 2 player tray (inset<em>player</em>) (or 2 ... | [
"organizer",
"storage",
"boardgame",
"openscad",
"thingiverse",
"inset"
] | Toys & Games > Board Games | [
"14933/images/image_1_compressed.jpg",
"14933/images/image_10_compressed.jpg",
"14933/images/image_11_compressed.jpg",
"14933/images/image_12_compressed.jpg",
"14933/images/image_13_compressed.jpg",
"14933/images/image_14_compressed.jpg",
"14933/images/image_15_compressed.jpg",
"14933/images/image_16_... | [
"14933/stls/inset.stl",
"14933/stls/inset_cp1.stl",
"14933/stls/inset_cp3.stl",
"14933/stls/inset_logo.stl",
"14933/stls/inset_map1.stl",
"14933/stls/inset_map22.stl",
"14933/stls/inset_player.stl",
"14933/stls/inset_player_blue.stl",
"14933/stls/inset_player_green.stl",
"14933/stls/inset_player_o... | CC-BY | https://www.printables.com/model/14933 | data_0047.tar |
352831 | Side main switch for Voron 2.4 R2 350mm / 300mm | <p>Side skirt for Voron 2.4 R2 350mm version with main switch. Second model is original back skirt with only AC input and covered hole of the original main switch.</p><p> </p><p>For those who has already printed back skirt, you can use a Switch cover so you dont need to print back part again.</p><p> </p><p>Pr... | [
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"352831/images/image_1_compressed.jpg",
"352831/images/image_2_compressed.jpg",
"352831/images/image_3_compressed.jpg"
] | [
"352831/stls/Rear AC inlet without switch 350.stl",
"352831/stls/Side b 300 with switch.stl",
"352831/stls/Side b 350 with switch.stl",
"352831/stls/Switch Cover.stl"
] | GPL3.0 | https://www.printables.com/model/352831 | data_0047.tar |
546994 | Side mounted daylight for Voron V0.2 (0 V0 0.2) | <p>All the daylight on a matchstick mounts are made to be mounted on the top of the extrusion, making it not so elegant. I made a version that hides inside the voron's body, invisible from the outside. Placed at 45 degree angle so the light hits 3d print perfectly. Standing half a meter (one voron0's height for America... | [
"daylight",
"vorondesign",
"voronmod",
"voron0",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"546994/images/image_1_compressed.jpg",
"546994/images/image_2_compressed.jpg",
"546994/images/image_3_compressed.jpg",
"546994/images/image_4_compressed.jpg",
"546994/images/image_5_compressed.jpg",
"546994/images/image_6_compressed.jpg"
] | [
"546994/stls/DaylightMount.stl"
] | GPL2.0 | https://www.printables.com/model/546994 | data_0047.tar |
938811 | Side-mounted Tool Holder for Voron Printers | <p>A small tool holder box for the essentials: side-cutter, tweezers, inbus keys etc.</p><p>Voron Logo SVG taken from github.com/GadgetAngel/Cricut_Voron_Logos</p><p>Use supports for the overhang only (see screenshot). </p><p>To fix it to the extrusion use one M3 t-nut and one M3 12 mm SHCS screw. </p> | [
"tool",
"holder",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"938811/images/image_1_compressed.jpg",
"938811/images/image_2_compressed.jpg",
"938811/images/image_3_compressed.jpg",
"938811/images/image_4_compressed.jpg"
] | [
"938811/stls/Voron_Toolholder.stl"
] | GPL3.0 | https://www.printables.com/model/938811 | data_0047.tar |
466836 | Sidewinder X2 Z Strebe | Gekürzte Version | [
"sidewinderx2",
"sidenwinder"
] | 3D Printers > Other Printer Parts & Upgrades | [
"466836/images/image_1_compressed.jpg"
] | [
"466836/stls/Z_Stütze_Links_Rechts.stl"
] | CC-BY | https://www.printables.com/model/466836 | data_0047.tar |
317302 | Siege Tank (Tank Mode) from Starcraft 1 |
<p>This is a interpretation of the Starcraft 1 Siege tank from memory. Though there are some differences, I believe it is recognizable.</p>
Category: Vehicles
| [
"mount",
"tank",
"scifi",
"sciencefiction",
"thingiverse",
"starcraft",
"armored",
"treadmill",
"starcrafti",
"starcraft1",
"armoredvehicle",
"siegetank"
] | Toys & Games > Vehicles | [
"317302/images/image_1_compressed.jpg",
"317302/images/image_2_compressed.jpg",
"317302/images/image_3_compressed.jpg"
] | [
"317302/stls/siege_tank_tank_mode_v2_chassis.stl",
"317302/stls/siege_tank_tank_mode_v2_turret.stl"
] | CC-BY | https://www.printables.com/model/317302 | data_0047.tar |
682700 | Siemens EQ 6 series coffee bean container extender stackable | <p>The model can be printed without supports. Maybe just rotate and print.</p><p>I printed it with 0.2 mm layer height</p><p>The extensions are stackable</p><p>PLA or PETG </p> | [
"container",
"coffee",
"extender",
"kaffee",
"kaffeevollautomat",
"kaffeemaschine",
"eq6",
"s100",
"simens",
"s300",
"s700",
"s400"
] | Household > Kitchen | [
"682700/images/image_1_compressed.jpg",
"682700/images/image_2_compressed.jpg",
"682700/images/image_3_compressed.jpg",
"682700/images/image_4_compressed.jpg",
"682700/images/image_5_compressed.jpg",
"682700/images/image_6_compressed.jpg",
"682700/images/image_7_compressed.jpg"
] | [
"682700/stls/Simens-Container-extender.stl"
] | CC-BY | https://www.printables.com/model/682700 | data_0047.tar |
47836 | Sierpinski Pyramid Stand | <p>A simple stand for the sierpinsky pyramid.</p>
<p>The model was quickly made with Blender. (www.blender.org)</p>
<p>Included is the initial version and one with less material usage (Infill modified) as 3mf.<br/>
Feel free to change the Infill to whatever you like.<br/>
Maybe even infill to 0% and downscaling of the ... | [
"stand",
"sierpinski"
] | Art & Design > Sculptures | [
"47836/images/image_1_compressed.jpg",
"47836/images/image_2_compressed.jpg"
] | [
"47836/stls/sierpinski-stand-less-material.stl",
"47836/stls/sierpinski-stand.stl"
] | CC0 | https://www.printables.com/model/47836 | data_0047.tar |
67531 | Sierpiński Tetrahedron | <p>This Sierpiński Tetrahedron makes a great desk ornament. And it's math-y, if you like that sort of thing.</p><h3>Print Settings</h3><p>In this print I used:</p><p>PLA</p><p>0.2 mm layers</p><p>Paint-on supports</p><p>0% infill (a Sierpiński Tetrahedron has no volume)</p><h3>Orientations and Supports</h3><p>There are... | [] | Learning > Math | [
"67531/images/image_1_compressed.jpg",
"67531/images/image_2_compressed.jpg"
] | [
"67531/stls/sierpinski-edge.stl"
] | CC-BY | https://www.printables.com/model/67531 | data_0047.tar |
116175 | sign empty |
<p>empty sign<br/>
You can print your own words :D</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>Supp... | [
"sign",
"pin",
"aquarium",
"garden",
"thingiverse",
"empty",
"ground",
"schild",
"stecken"
] | Hobby & Makers > Other Ideas | [
"116175/images/image_1_compressed.jpg",
"116175/images/image_2_compressed.jpg"
] | [
"116175/stls/sign_empty.stl"
] | CC-BY | https://www.printables.com/model/116175 | data_0047.tar |
754893 | Siku Fendt Gewicht | <p>Siku Fendt Gewicht</p> | [
"fendt",
"siku"
] | Toys & Games > Vehicles | [
"754893/images/image_1_compressed.jpg",
"754893/images/image_2_compressed.jpg",
"754893/images/image_3_compressed.jpg",
"754893/images/image_4_compressed.jpg",
"754893/images/image_5_compressed.jpg"
] | [
"754893/stls/Fendt siku gewicht.stl"
] | CC0 | https://www.printables.com/model/754893 | data_0047.tar |
1312117 | Silakka54 Tent & Tilt Ergonomic Kit (for Slim Screwless Case) | <p>Kit de mala e tenda para<strong> Silakka54</strong></p><p>Este kit é compatível exclusivamente com o estojo sem parafusos Slim Silakka54:<br><a href="https://www.printables.com/model/1248872-slim-silakka54-screwless-case">https://www.printables.com/model/1248872-slim-silakka54-screwless-case</a></p><p>Ele fornece um... | [
"keyboard",
"ergonomic"
] | Gadgets > Other Gadgets | [
"1312117/images/image_1_compressed.jpg",
"1312117/images/image_2_compressed.jpg",
"1312117/images/image_3_compressed.jpg",
"1312117/images/image_4_compressed.jpg",
"1312117/images/image_5_compressed.jpg",
"1312117/images/image_6_compressed.jpg",
"1312117/images/image_7_compressed.jpg",
"1312117/images... | [
"1312117/stls/silakka54_left_base_support.stl",
"1312117/stls/silakka54_left_side_shell.stl",
"1312117/stls/silakka54_right_base_support.stl",
"1312117/stls/silakka54_right_side_shell.stl",
"1312117/stls/silakka54_tilt_wedge_xdeg.stl"
] | GPL2.0 | https://www.printables.com/model/1312117 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.