text stringlengths 78 3.17k |
|---|
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_ON_BOARD_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being brought down to IN_RESET state due to occurence of multiple critical faults/alarms on the node.), (Recommended Action: Copy the error m... |
<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB_EDM_NOTIF_GEN
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB external data manager failed to generate a trap notification. Process would continue to run normally.), (Recommended Action: This message indicate that trap notifications of the oper... |
<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical sup... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-INVALID_ADJ_SID
### Response:
(Severity: 4), (Category: ROUTING), (Description: When adjacency SID value is configured, it should be within the SR Local Block configured on the router (default 15000-15999). The adjacency SID will not be used until this config inconsistency ... |
<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_READ_RTC
### Response:
(Severity: 7), (Category: MGBL), (Description: Reading value of RTC at particular time.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_LMRIB_LABEL_RW
### Response:
(Severity: 3), (Category: ROUTING), (Description: A LMRIB Label Rewrite related error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support rep... |
<｜begin▁of▁sentence｜>
### Instruction:
DAPS-5-UTIL_HIGH
### Response:
(Severity: 5), (Category: IP), (Description: Utilization exceeded high threshold across all pools. The unallocated addresses may deplete very soon and so it would be good to add more pools or address ranges for allocation to new clients. Otherwise ne... |
<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-MSG_SEND_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The message sent to the media server failed for the specified operation number and failed for the specified reason.), (Recommended Action: Report this message to TAC if the message showed up o... |
<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-PEER_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Some peer error occured. This is just a warning. Please ensure that the msdp peers are configured correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in th... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-LIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: ... |
<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_FF_OVF_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact su... |
<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-IM_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to perform initialization with the interface manager process. The error could be because Interface Manager is unavailable at the time of ANCP initia... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-CONFLICTING_LSAID
### Response:
(Severity: 4), (Category: ROUTING), (Description: An LSA could not be generated because there is a supernet lsa with the host bit set LSA ID that conflicts with the major net LSA ID that also needs to have host bit set.), (Recommended Action:... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_DATABIT_STUCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly... |
<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-LBUS_READ_TIMEOUT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus read operation timeout error.), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-SR_TE_LL_INVAL_NEXTOBJ
### Response:
(Severity: 2), (Category: ROUTING), (Description: lspnh ll programmed to drop because of invalid next obj), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call... |
<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-OOR_TBL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The FIB process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes/tables are deleted and customer does a recreate of the table.... |
<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_DELETED
### Response:
(Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box' because the interface on which it was flagged has been deleted.), (Recommended... |
<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-CFG_UNDEFINED
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: The prepaid configuration name that was specified in the prepaid command has not been defined in the system.), (Recommended Action: Define a prepaid configuration with the name used in the p... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-LRD_CALL_STILL_TRYING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call some APIs to retrieve information during its initialization. If the information is not retrieved successfully install director will retry after a small... |
<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_block() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide th... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_VETHER_DRIVER-3-REPORT_BER_SET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BIP error count has crossed the threshold count w.r.t the configured threshold value.), (Recommended Action: *NONE*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTU1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-GET_NODE_ID_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to get node id in process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Node I... |
<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-DEVICE_REPAIRED
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified has some inconsitencies in the filesystem and was repaired. See log file for specific reason.), (Recommended Action: Run install verify and cfs check.)
<|EOT|>... |
<｜begin▁of▁sentence｜>
### Instruction:
ATM_OAM-2-SYSDB_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in sysdb operation. %s - Type of the error. This error happens on the LC with ATM interfaces It could be one of the following types: - Unknown parameter - Sysdb Tuple is not of proper type - Sysdb... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using com... |
<｜begin▁of▁sentence｜>
### Instruction:
QAD_QUEUE_MODEL-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide t... |
<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTNOTRUNNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Trying to stop BERT when not running), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-SONET_XCVR_CODE
### Response:
(Severity: 2), (Category: L2), (Description: The xcvr code is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recom... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-6-INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: This may not be a failure, but the information about the progress of the install operation.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SSE_PFILTER_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is ... |
<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt controller encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco techni... |
<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-SYSDB_CONN
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP Server was unable to create a connection to the SysDB component. It may be that the communication infrastructure is faulty, or that the SysDB component has not yet restarted. If the errors ... |
<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-INV_READ_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that the switch's static configuration data could not be read or parsed successfully.'), (Recommended Action: Determine the board type (version/revision) to make sure that its of support... |
<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-6-LINK_SHUT_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The intra-rack switch port was administratively shut down.), (Recommended Action: This port is being administratively shutdown. No further action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INV-6-XFP_OIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Optic Interface Module (XFP) for the specified port has either been inserted or removed.), (Recommended Action: This is an info message saying the XFP is inserted/removed. Please check if there is a... |
<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-IFD_ETHSVR_MSG_ERR
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic software has detected an error while running Field/Offline Diagnostic (IFD) on the target node/card under test.), (Recommended Action: Collect the console error messages exactl... |
<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-1-PERSISTENT_SERDES_FAIL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Persistent failure in serdes link.), (Recommended Action: Please try powercycling the board using command: 'hw-module loc <> reload'. Make sure board is seated properly. If the message... |
<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-6-UNREG_PROC_SUCCESS
### Response:
(Severity: 6), (Category: HA), (Description: Process un-registration for node memory state with wdsysmon is success.), (Recommended Action: No action required)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values ar... |
<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR3
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support repr... |
<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-SERDES_CLOCK
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. SerDes Clock Failure/Recovered. SerDes PLL Lock is lost or recovered. 2. SerDes input clock failure. This could be also result of hardware failure. Following enum defines significance of 'BMP... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_0_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated prope... |
<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-SFPPLUS_ACCESS_PERSIST
### Response:
(Severity: 3), (Category: L2), (Description: Software could not access the optics module during initialization.), (Recommended Action: Replace the SFPPLUS.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_INTERNAL_ASIC
### Response:
(Severity: 3), (Category: L2), (Description: Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted.), (Recommended Action: No action is required. The process will automatically retry... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-REQ_MSG_PROCESSING
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred during processing of a LWM message from a client.), (Recommended Action: Please check the operation requested and retry. If the message recurs, copy the error message exa... |
<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_FMEA-4-CLOCK_ALERT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One of the internal/external clock interfaces have reported an alarm as specified in the alarm description. This does not necessarily mean any fault in the hardware. Some alarms can occur t... |
<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-CHKPT_RECORDS
### Response:
(Severity: 6), (Category: OS), (Description: Status information while checkpointing.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperat... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Overload bit in IS-IS?
### Response:
The Overload bit is a special bit that can be set in the LSP to indicate that the router should not be used as a transit router. This is useful when the router is in a transient state, such as during startup or during... |
<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-TIMEZONE_CFGSTR_SET_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate error when setting timezone string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support repr... |
<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-NO_MEMORY
### Response:
(Severity: 7), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and p... |
<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-4-ERR_EVENT_WAIT
### Response:
(Severity: 4), (Category: MGBL), (Description: The event loop has received a message of a type it does not recognize. All events should be received by handlers. This message is only a warning and does not represent a problem in its own right.... |
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-TRANSPORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC Media DLL has encounered the annunciated transport error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encounte... |
<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-7-ERR_BAG_REGISTRY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-FRETTA library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recu... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated... |
<｜begin▁of▁sentence｜>
### Instruction:
BCDLPROD-6-MSG_GENERIC_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: BCDL producer dll encountered an error.), (Recommended Action: Contact support.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-DEBUG_SENDV
### Response:
(Severity: 7), (Category: OS), (Description: debug print before msg_sendv), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide... |
<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SESSION_START
### Response:
(Severity: 5), (Category: L2), (Description: After all config dependencies are resolved MKA started session specific to each interface), (Recommended Action: No action required (normal operation).)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-NLSOCK_CREATE_FAIL
### Response:
(Severity: 4), (Category: DRIVER), (Description: IOFPGA driver creates Socket on Black VLAN interface (3073) for communicating with remote cards in the Chassis. If the socket creation fails, then all Ethernet communication from Niantic fai... |
<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-4-LTRACE
### Response:
(Severity: 4), (Category: IP), (Description: There was a system call failure during initialization of the ltrace logging system. Ltrace logs may not be available.), (Recommended Action: Copy the error message exactly as it appears, and report it to ... |
<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-DEPRECATED_CONFIG_BURST_INTERVAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Burst-interval configuration is no longer available and will be removed in a subsequent release.), (Recommended Action: Use tx-interval to configure transmission interval f... |
<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-INCORRECT_PARTITIONS_REPARTITION_DEVICE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if there is incorrect eUSB partitions and if ... |
<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-BGP_ENS_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and p... |
<｜begin▁of▁sentence｜>
### Instruction:
ZTP-7-DEVICE_CONFIGURED
### Response:
(Severity: 7), (Category: INFRA), (Description: Device is already configured. ZTP will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representat... |
<｜begin▁of▁sentence｜>
### Instruction:
MACE_CLIENT-0-ERR_MEMORY_MAP
### Response:
(Severity: 0), (Category: PLATFORM), (Description: An error occurred in mace driver due to memory mapping failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system ... |
<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-ERR_EXIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in NPU Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in th... |
<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: OC192VPA driver general info.), (Recommended Action: show asic-error plim asic .. loc <>)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-BITS_CONFIG_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BITS-In and BITS-out ports support either of T1/J1/E1/2M/6M/64K modes. Framing modes and linecoding modes are specific to each BITS mode.), (Recommended Action: Ensure th... |
<｜begin▁of▁sentence｜>
### Instruction:
PLIM_LIB-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occured during sysdb_register_notification for PLIM process. With this, config change in the syslogTXfault will not be notified to the respective PLIM process.), (Recommended Action: Co... |
<｜begin▁of▁sentence｜>
### Instruction:
rspp_drop-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred when installing the capability in NetIO to process slow path packets for service diversion. If this occurred during an upgrade operation then it will cause the NetIO process to rel... |
<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW
### Response:
(Severity: 3), (Category: OS), (Description: error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.), (Recommended Action: Copy the error m... |
<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex unlock failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provi... |
<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-SPP_ADD_L2_HDR_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in adding the L2 header by SPP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the ... |
<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-NVSATOFFINIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred when initializing the nV Satellite multicast offload channel. Multicast offload will not function correctly. All dependent replications will happen on local device.), (Recommended A... |
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias th... |
<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-MESSAGE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A message was received and did not match any outstanding requests and also is not a standalone message. This is not a critical failure, the process can continue functioning as expected de... |
<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The l... |
<｜begin▁of▁sentence｜>
### Instruction:
vlma-6-NO_MEM
### Response:
(Severity: 6), (Category: L2), (Description: The VLAN MA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: R... |
<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_PSK_PEER_NOT_FOUND
### Response:
(Severity: 5), (Category: L2), (Description: Connectivty Association(CA) runnning with fallback PSK, has not received a MKPDU from it's MACsec peer for at least 6 seconds.), (Recommended Action: Check connection to peer and if peer i... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_STARTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation has been started - another message will be displayed when it is finished.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-START_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: Spanning tree could not be started on the control ethernet for the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp... |
<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-4-GEN_RC_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: Request ONEP failed. It may caused by ONEP configuration lost or ONEP process failed.), (Recommended Action: Check ONEP configuration and process.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_PM_ROLE_CHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: ISIS is notified by PM on HA or ISSU roles.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_OOS_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the me... |
<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_CD
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not change to a required directory, so processing of the current operation will halt.),... |
<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-PROTOCOL_GENERIC
### Response:
(Severity: 4), (Category: L2), (Description: The entire PDU, or one or more IEs in the PDU, were ignored due to the given error. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check... |
<｜begin▁of▁sentence｜>
### Instruction:
FPD_SERVER-3-UPGRADE_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Update FPD upgrade ERROR), (Recommended Action: Customer immediately knows the reason of failure.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-3-EVET_MGR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates that SPA process was unable to create event manager. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No acti... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ABORTING_FORCE_RELOAD_NODE
### Response:
(Severity: 4), (Category: INSTALL), (Description: Reload the node while aborting LOAD phase of install issu operation.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-SRLG_ANNOUNCE_ON_TERM_INTF_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: This is to notify that SRLG announcement for term intf has failed for a tunnel.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recur... |
<｜begin▁of▁sentence｜>
### Instruction:
VKG_BCM8705-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Ether-Ctrl process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed num... |
<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_CONN_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the ... |
<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-ERR_2SD_PARAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with three parameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support repre... |
<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-4-NODE_NOT_PRESENT
### Response:
(Severity: 4), (Category: INFRA), (Description: Node to be reloaded is not present in the inventory.), (Recommended Action: Collect system log information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-EDM_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization EDM of the CGN process on a particular node. The errors were seen during event connection operation. The process will be restarted.), (Recommended Actio... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.