text stringlengths 78 3.17k |
|---|
<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWMUTEXLOCKERROR
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred acquiring a mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representativ... |
<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-APPL_DEV_RESYNC_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detected a db inconsistency when performing a resync with an application.), (Recommended Action: Copy the error message exactly as it appears on the console ... |
<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-ADMIN_CLEAR_BINDINGS
### Response:
(Severity: 6), (Category: IP), (Description: The administrator cleared the bindings.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_SHMEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to open the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBo... |
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_PDU_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The length (PDU_LENGTH) reported in the PDUTYPE header is greater than packet length (PKTLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter ... |
<｜begin▁of▁sentence｜>
### Instruction:
spp-0-EMERG
### Response:
(Severity: 0), (Category: PKT_INFRA), (Description: An emergency error has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide... |
<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_CLEARED
### Response:
(Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to e... |
<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-6-FIRMWARE_UPGRADE_PWR_OK
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Firmware upgrade proceeding'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR provide high availability in terms of hardware redundancy?
### Response:
IOS XR platforms support redundancy of critical hardware components including route processors (RP), line cards (LC), switch fabric cards (FC), power modules, and fan trays. IOS XR provides hi... |
<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-TX_DISABLE
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise... |
<｜begin▁of▁sentence｜>
### Instruction:
ETH_INTF-3-DLL_OPEN_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred opening a dependent DLL and loading its symbols. The process is unable to run.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_ERROR_BUT_NO_CLI_CONNECTION
### Response:
(Severity: 3), (Category: INSTALL), (Description: The incremental install operation has encountered an error. And no 'nopromppt' is supplied in the activation command. The install would ask the user a question as how to p... |
<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-NOPACKET
### Response:
(Severity: 3), (Category: IP), (Description: This error occurs when the supplied packet ptr is NULL. Most likely a resource problem within the system.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease ... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR1_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, ... |
<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-DEV_QSFP_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during QSFP+ initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The... |
<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_PKT_BAD_PDU_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: A message with invalid PDU length was received from the peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical... |
<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_PARSE
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received which MRP could not decode. The MRP infrastructure was unable to parse the packet correctly because certain fields are missing or truncated. The specific MRPD... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NSR_SYNC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred during the NSR sync between active and standby OSPF processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisc... |
<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_LOCK_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Reco... |
<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-BRM_BARRIER_SYNCUP_FAILED
### Response:
(Severity: 1), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco techni... |
<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-NEIGHBOR_LIMIT
### Response:
(Severity: 4), (Category: L2), (Description: The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defen... |
<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_CERR_V
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot Register with CERR_V subsystem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call you... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, ... |
<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_GET
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to retrieve some data from SysDB, so may not be able to function. Installations may not produce the expected results.), (Recommended Action: Copy the error ... |
<｜begin▁of▁sentence｜>
### Instruction:
HFR_FSDB_FADB_LTRACE-3-INTERNAL_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB FADB ltrace lib failed to initialize the internal ltrace), (Recommended Action: Search the event logs for events/errors related to the failure reason. Ltrace usage is ... |
<｜begin▁of▁sentence｜>
### Instruction:
How can you configure EPC in Cisco IOS XR?
### Response:
To configure EPC in Cisco IOS XR, you need to use the 'monitor capture' command followed by the capture point name and other parameters such as the interface, direction (in or out), and filter conditions.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_A_PKT_LTH_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder A length error.), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_CNTR_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF counter memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco techni... |
<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-LIST_ITEM_COUNT
### Response:
(Severity: 3), (Category: SYSDB), (Description: When sysdb get multiple items operation received wrong number of items), (Recommended Action: *SUPPORT*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PROXY_ECM_EXIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The i2c server proxy process ECM failed due to the reason mentioned in the message.), (Recommended Action: None. The ECM will automatically retry the connection until it is successful.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-RESUME_INCOMPLETE_INSTALL
### Response:
(Severity: 4), (Category: INSTALL), (Description: An incomplete install was encountered - we will attempt to resume the install.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORE_FILE_NAME_UNAVAIL
### Response:
(Severity: 6), (Category: OS), (Description: The core dump file name for this crash is invalid.), (Recommended Action: No action required. Ignore.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-GEN
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an internal error during initialisation. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Ret... |
<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support traffic engineering?
### Response:
Cisco IOS XR supports traffic engineering through MPLS-TE, allowing for the optimization of network bandwidth usage by directing traffic flows across predetermined paths based on network resource availability and req... |
<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-ODN_ON_UNSUPPORTED_ROUTE
### Response:
(Severity: 4), (Category: L2), (Description: On Demand Nexthop (ODN) or Automatic Steering (AS) is only supported on a subset of EVPN Route Types, and only some SR-TE tunnel types are supported. A Segment-Routing Traffic Engineering (S... |
<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-NV_FABRIC_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: An satellite fabric interface was shut down or brought up by a nV CFM MEP after a fault condition was detected or cleared. The (auto-generated) MEP details can be used to identify the nV CFM MEP in t... |
<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_MEM1_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM1 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representati... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR3_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, ... |
<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-layer's registration with LSD failed.), (Recommended Action: Service layer's registration with Label Switching Database failed. If this is seen during programming the Service laye... |
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_BAD_SOCKET_ADDR_LENGTH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A packet which IS-IS has received from its network socket contains a socket address with an invalid length. This is an internal software error which indicates that the packet has been... |
<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-3-MBR_RETRY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The hardware configuration for the Bundle member has reached the maximum number of retries. Hitting this error typically indicates that the member interface has either hit physical interface... |
<｜begin▁of▁sentence｜>
### Instruction:
SSE_TCAM_MGR-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of SSE TCAM Mgr process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to initialize th... |
<｜begin▁of▁sentence｜>
### Instruction:
VMANCLNT-3-VMAN_ERROR
### Response:
(Severity: 3), (Category: LIB), (Description: Error messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support r... |
<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_MBIST_CHANNEL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the channel error associated with the MBIST operation.), (Recommended Action: The line card needs to be returned f... |
<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-4-HW_READ_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an error message in the RDM lib to indicate that it failed to perform a hw read of specified NPU instance due to the specified reason.), (Recommended Action: This is a fatal error and... |
<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-INTF_HANDLE
### Response:
(Severity: 6), (Category: IP), (Description: 'Interface lookup failed for source-interface'), (Recommended Action: *SH_TECH*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-REG_SEC_DEL_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Sysdb is attempting to del a registration that does not exist in its secondary registration context.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on t... |
<｜begin▁of▁sentence｜>
### Instruction:
FABIO-7-ERR_SEND_EGRESS_IPSLA_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: a Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide... |
<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-REGISTRATION
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a TTY management operation.), (Recommended Action: Reduce other system activity to ease memory demands. If condition... |
<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-2-UNLOCKING
### Response:
(Severity: 2), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error releasing a lock. To avoid the potential for deadlock the process is aborting.), (Recommended Action: Copy the error message exactly as i... |
<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-DECAP
### Response:
(Severity: 4), (Category: FORWARDING), (Description: This message indicates that an error has occurred during packet decapsulation. Particular reason is included in the message.), (Recommended Action: Please contact Cisco TAC and provide this messag... |
<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-MAX_RETRY
### Response:
(Severity: 3), (Category: L2), (Description: Pseudo-Wire fault request retries reached to its maximum value. It will display function and line here as well. The message contains info about the location and cause of the failure and possibly ant... |
<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-LSD_CONN_FAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP's connection to the LSD has been lost and the connection will be retried.), (Recommended Action: This message may appear after a router reboot or route-processor fail-over event, or after softw... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the messag... |
<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_ST2
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST2.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNEXPECTED_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager or Platform Manager encountered a critical system(OS) error. It will exit right away.), (Recommended Action: Copy the error message exactly as ... |
<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-LCL_ATTRIB_ENTER_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: FIB has a limit on the number of local attribute indices it allocates per per table. Check if the maximum number make sense from BGP routes/config.), (Recommended Action: Copy the error mess... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPARM_IF
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified IP/ARM request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and prov... |
<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_8
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as ... |
<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_TTY_DETAILS
### Response:
(Severity: 3), (Category: IP), (Description: An unexpected error occurred when TelnetD tried to retrieve the details of a VTY from a utility library), (Recommended Action: Copy the error message exactly as it appears on the console or in the... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE3_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. M... |
<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-3-ERR_ORPHAN_COUNT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A partial retrievel of buffers happened for the current process that restarted due to retrieved orphan_count less than actual orphan_count.), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-DB_READY_Q
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provi... |
<｜begin▁of▁sentence｜>
### Instruction:
NP-2-MEMORY_RESOURCE_PROFILE_UNKNOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Attempt to retrieve configured memory resource profile from SysDB failed, resulting in activation of the default memory resource profile.), (Recommended Action: Copy the error mes... |
<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_FULL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after RIB restarted.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <... |
<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_SSUA
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SSUA.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-SYSDB_API_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and pr... |
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the functi... |
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_MODULATOR_BIAS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that ShelfmgrV2 ltrace initialization has failed. Embedded string provides the details of failed function name and the error details.), (Recommended Action: Copy t... |
<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-TIMER_INIT_FAILED
### Response:
(Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to initialize its timers.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MKA-4-UNKNOWN_CKN
### Response:
(Severity: 4), (Category: L2), (Description: Received MKPDU contains CKN different from the one active on the interface), (Recommended Action: Check the peer end configuration, and confirm both ends have the same CKN, CAK pair configured)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_PKT_LEN_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 11 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error me... |
<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-IP_ADDR_TOO_LONG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support repre... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-DUP_RTRID
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF received hello packet from a neighbor which has the same router-id as this routing process. A full adjacency cannot be established.), (Recommended Action: OSPF router-id should be unique. Change ... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_DEBUG-7-REGISTER_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2VPN component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CONN_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support represe... |
<｜begin▁of▁sentence｜>
### Instruction:
What are the planes into which the IOS XR architecture is logically divided?
### Response:
The IOS XR architecture is logically divided into a management plane, control plane, and data plane. The management plane provides CLI, XML, and SNMP based configuration and monitoring. The ... |
<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-GRACEFUL_SHUTDOWN
### Response:
(Severity: 6), (Category: ROUTING), (Description: Informs user of graceful shutdown events. User needs to be aware of these activities.), (Recommended Action: No action required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-ISSU_LOAD_EXEC
### Response:
(Severity: 7), (Category: MGBL), (Description: 'ISSU install notification message for LOAD EXEC Phase received'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical sup... |
<｜begin▁of▁sentence｜>
### Instruction:
LI_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: 1) Li MD could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. This error can happen when a new bundle member ... |
<｜begin▁of▁sentence｜>
### Instruction:
RT_PROXY-3-ERR
### Response:
(Severity: 3), (Category: L3), (Description: An internal software error occurred that prevented Route proxy from working properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco ... |
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-FABRIC_CARD_RESET_REJECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that shelf manager can not comply with the fabric software request to reload a failed node due to the reason mentioned in the message. The fabric software ... |
<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-CERRNO
### Response:
(Severity: 7), (Category: MGBL), (Description: The TTY Server has failed to register the TTY error codes with the error subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco te... |
<｜begin▁of▁sentence｜>
### Instruction:
NP-3-UIDB_THRESHOLD_WARNING_PER_NP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The UIDB entry utilization for a specific NP on a specific LC has exceeded the default warning threshold (90 %)), (Recommended Action: Limit UIDB usage accordingly. This is a direct... |
<｜begin▁of▁sentence｜>
### Instruction:
PA-4-EVENT_REGISTRATION_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: The PA process failed while attempting to connect to an event manager channel for the indicated subsystem.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CCV-6-CONFIG_SCRIPT_MODIFIED
### Response:
(Severity: 6), (Category: MGBL), (Description: A modification to a currently configured config script was detected, meaning that the script was either created, moved, deleted, or had its contents altered. Unless it can no longer be found,... |
<｜begin▁of▁sentence｜>
### Instruction:
What are the key components of the IOS XR high availability architecture?
### Response:
The key components of the IOS XR HA architecture are\n- Redundant hardware: Includes fans, power, controllers, processors, line cards\n- Process restartability: Critical processes can restart a... |
<｜begin▁of▁sentence｜>
### Instruction:
CCC-2-POWER_FAULT
### Response:
(Severity: 2), (Category: DRIVER), (Description: CCC FPGA detected fault on one of the power sequencer device. This is an indication that one of the power rails connected to this power sequencer was detected to have a fault. This will result in card... |
<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_PFC_MODE_CHANGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If moving to or from buffer-extended mode, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic inita... |
<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-CONF_SYNC_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: If the source device boots from a non-default disk disk0 check rommon variable BOOT_DEV_SEQ_OPER on the destination node correct the setting if necessary and retry migration If the problem pe... |
<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-BACKEND_EDM
### Response:
(Severity: 3), (Category: OS), (Description: An internal EDM backend function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support represen... |
<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-OBFL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process failed to log alarms due to the reason mentioned in the message.), (Recommended Action: Collect the logs mentioned in required info Copy the error message exactly as it appears on ... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the messag... |
<｜begin▁of▁sentence｜>
### Instruction:
BCDL2-3-MSG_NULL_CONTEXT
### Response:
(Severity: 3), (Category: OS), (Description: The pointer to the context passed by bcdl_rack_updown_handler was NULL. This can affect inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-2-NODE_BRINGDOWN
### Response:
(Severity: 2), (Category: L2), (Description: This is a message in the Asic Scan Server to indicate that it has triggerred a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan opera... |
<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (spa_oc3_oc12) process, up to a fixed number of ... |
<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-SR_TE_GID_EXISTS
### Response:
(Severity: 2), (Category: ROUTING), (Description: An SRTE tunnel local label object was created with an existing gid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the syst... |
<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POLICY_COMMUNITY_OVERFLOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: Policy tried to add more communities than a BGP route can hold.), (Recommended Action: Find the affected neighbor with 'show bgp community truncated'. Modify policy on the affected neig... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.