hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5.3 Test purpose | To verify that the UE is able to read the information broadcasted in SIB18 and use the information for cell reselection according to core spec 25.331. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5.4 Method of test | Initial conditions
The UE is equipped with a USIM containing default values.
Cell reselection parameters are set to default values, so the cell-ranking criterion R equals CPICH_RSCP / RF Signal Level.
The Inter-RAT Cell Info List of Cell 1 (UTRAN) refers to Cell 9 (GSM) and Cell 10 (GSM).
The 3G Neighbour Cell Descript... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.5.5 Test requirements | 1) In step b), the UE shall respond on Cell 1
2) In step d), the UE shall not respond on Cell 9 or Cell 10.
3) In step f), the UE shall respond on Cell 10.
6.2.2.5a Cell reselection using SIB18; UTRAN(1.28Mcps TDD) to GSM
6.2.2.5a.1 Definition
Test to verify that the UE performs cell reselection according to core speci... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6 Cell reselection based on Absolute Priorities(both High priority and Low priority reselection) in SIB19; UTRAN to GSM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6.1 Definition | To verify that UE reselects from UTRAN to GSM cell when absolute priority of GSM cell is indicated in SIB19 and the cell reselection criteria is fulfilled. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6.2 Conformance requirement | If the cell is not operating in MBSFN mode according to subclause 8.1.1.6.3 the UE should store all relevant IEs included in this system information block. If the cell is not operating in MBSFN mode according to subclause 8.1.1.6.3 the UE shall:
1> if the value of the IE "Priority status" in the variable PRIORITY_INFO_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6.3 Test purpose | 1. To verify that the UE performs cell reselection from UTRAN to GSM on the following occasions:
1.1 Reselection criteria for low priority cell in SIB 19 are fulfilled.
1.2 Reselection criteria for high priority cell in SIB 19 are fulfilled. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6.4 Method of test | Initial Condition
UE is idle updated on Cell 1.
All cells belong to the same PLMN.
The Inter-RAT Cell Info List of Cell 1 (UTRAN) refers to Cell 9(GSM).
The 3G Neighbour Cell Description of Cell 9(GSM) refers to Cell 1(UTRAN).
UTRAN cell broadcasts SIB19 with default contents as per 34.108. ( FFS)
Related ICS/IXIT stat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.2.2.6.5 Test requirements | At step d), UE reselects to Cell9(GSM) which is configured as low priority cell.
At step j), UE reselects to Cell9(GSM) which is configured as high priority cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3 HNB Environment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1 CSG Selection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1 Manual CSG ID Selection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1.2 Conformance requirement | 1. If the MS supports CSG, it is provisioned with a list of allowed CSG identities and associated PLMN identities from the USIM if the list is available in the USIM or as described in 3GPP TS 24.285 if the list is not available in the USIM. This list has zero or more entries.
- Manual mode: In this mode, the MS indicat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1.3 Test purpose | To verify that the UE could select a specific CSG by manual selection procedure and show/update the CSG list. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1.4 Method of test | Initial conditions
1. There exists 4 cells which belong to 3 different CSG IDs respectively- CSG1(cell1), CSG2(cell2), and CSG3(cell4, cell5), and cell4 has better RF quality than cell5. Cell levels are from the table below.
Cell
CPICH_Ec [dBm/3.84 MHz]
CSG ID
Test Channel
PLMN
LAC
Cell 1
-60
CSG 1
1
PLMN1
001
Cell 2
-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.1.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1.
2) In step d), the list is displayed on the UE with 3 CSG IDs and the indications of whether these CSG IDs are in the UE’s Allowed CSG List. It indicates that CSG 1 and CSG 2 are accessible, while CSG 3 is inaccessible.
3) In step f), the response from the UE ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2 UE in automatic network selection mode to select a suitable CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2.2 Conformance requirements | For an eCall only mobile station, Timers T3242 and T3243 are considered to have expired at power-on. When mobility management is activated after power-on, the service state is 19.7 PLMN SEARCH. The detailed processing in this state is described in detail in 3GPP TS 23.122 , 3GPP TS 43.022, 3GPP TS 45.008 and 3GPP TS 2... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2.3 Test purpose | Selection of the Service State after Power On: If the mobile station is in automatic network selection mode and the selected cell is a CSG cell whose CSG ID is not in the allowed CSG ID list stored in the MS, then the mobile station enters the LIMITED SERVICE state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2.4 Method of test | Initial conditions
1. There exists 2 cells which belong to 2 different CSG IDs respectively- CSG1(cell1), CSG2(cell2). Cell levels are from the table below.
Cell
CPICH_Ec [dBm/3.84 MHz]
CSG ID
Test Channel
PLMN
LAC
Cell 1
-60
CSG 1
1
PLMN1
001
Cell 2
-65
CSG2
1
PLMN1
001
2. There exists a UE whose Allowed CSG List does... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.2.5 Test Requirements | In step c) the UE shall inform that no service or no network is available.
In step f) the response from the UE shall be on Cell 2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3 Manual CSG ID Selection across PLMNs | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3.1 Definition | Test to verify that the UE performs the manual CSG ID selection whose CSG ID is not within the registered or selected PLMN in CSG or hybrid cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3.2 Conformance requirement | 1. If the MS supports CSG, it is provisioned with an Allowed CSG list and an Operator CSG list and associated PLMN identities. Both lists can be retrieved either from the USIM if the lists are available in the USIM, or as described in 3GPP TS 24.285 [47] if the lists are not available in the USIM. These lists have zero... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3.3 Test purpose | 1. To verify that the UE could select a specific CSG by manual selection procedure across PLMNs and update the Allowed CSG list.
2. To verify that the UE could select a specific CSG ID of a hybrid cell by manual selection procedure and does not update the Allowed CSG list.
3. To verify that, after having selected a CSG... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3.4 Method of test | Initial conditions
1. There exists 3 cells which belong to 3 different CSG IDs respectively- CSG1(cell1), CSG2(cell4), and CSG3(cell8). Cell levels are from the table below.
Cell
CPICH_Ec [dBm/3.84 MHz]
CSG ID
CSG Indicator
Test channel
PLMN
LAC
Cell 1
-70
CSG 1
Enumerated (TRUE)
1
PLMN1
001
Cell 4
-65
CSG 2
Enumerated... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.3.5 Test Requirements | 1) In step c), the response from the UE shall be on Cell 1. The displayed PLMN shall be PLMN 1.
2) In step d) the list is displayed on the UE with 3 CSG IDs and their associated PLMNs and the indications of whether these CSG IDs are in the UE’s CSG whitelist. It indicates that CSG 1 is accessible, while CSG2 and CSG 3 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4 Suitable Cell checking for reselection to the CSG Cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4.1 Definition | Test to verify the UE can check whether a Cell is a CSG suitable Cell according to the CSG id and ePLMN identity. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4.2 Conformance requirement | 1: Definitions
For the purposes of the present document, the following definitions and the definitions in [12] apply.
Absolute priority layer: A priority level can be defined for a UTRA frequency, a group of GSM frequencies or a E-UTRA frequency.
CSG whitelist: A list provided by NAS containing all the CSG identities a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4.3 Test purpose | 1. To confirm that a CSG Cell is considered as a suitable Cell when the CSG ID with associated PLMN identity of the CSG Cell is included in the UE’s CSG whitelist. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4.4 Method of test | Initial conditions
There exist 2 Cells: Cell 1and Cell 2.
Cell 1 shall include Cell 2 as neighbouring Cell in its System Information Block Type 11.
Cell 1 belongs to PLMN 1
Cell 2 is a CSG Cell with the CSG ID of CSG 2. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set to 144 and “Number of PSCs... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.1.4.5 Test requirements | 1) In step c, the UE shall respond and camp on Cell 1.
2) Void
3) In step e, the UE shall respond and camp on Cell 2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2 Reselection from a non-CSG cell to an allowed CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1 Intra-frequency cell reselection from a non-CSG cell to an allowed CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1.1 Definition | Test to verify that the UE performs the intra-frequency cell reselection from a non-CSG cell to an allowed CSG cell correctly for non-hierarchical cell structures in FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation procedure has been modified.
2.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1.3 Test purpose | 1. Verify that in FDD, the UE performs intra-frequency measurements for CSG cells even when the normal measurement rules mentioned in Section 5.2.6.1.1 of TS 25.304 do not mandate it.
2. Verify that in FDD, the UE reselects to an allowed CSG cell on the same frequency if the concerned CSG cell is the highest ranked cel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1.4 Method of test | Initial conditions
Cell 1 shall not include Cell 2 as a neighbouring cell in its System Information Block Type 11.
Cell 2 shall include Cell 1 as a neighbouring cell in its System Information Block Type 11.
Cell 2 shall also include:
- “CSG Indicator” in its Master Information Block
- “CSG Identity” and “CSG PSC Split ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.1.5 Test requirements | 1) In step c, the UE shall respond on Cell 1.
2) In step d, the UE shall not respond on Cell 2.
3) In step e, the UE shall respond and camp on Cell 2.
4) In step g, the UE shall respond on Cell 1.
5) In step i, the UE shall respond on Cell 2 within 10 mins. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2 Inter-frequency cell reselection from a non-CSG cell to an allowed CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2.1 Definition | Test to verify that the UE performs the inter-frequency cell reselection using autonomous search from a non-CSG cell to an allowed CSG cell correctly for non-hierarchical cell structures in FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation procedure has been modified.
2.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2.3 Test purpose | 1. Verify that in FDD, the UE performs inter-frequency measurements for CSG cells using autonomous search, even when the normal measurement rules mentioned in Section 5.2.6.1.1 of TS 25.304 do not mandate it.
2. Verify that in FDD, the UE reselects to an allowed CSG cell on a different frequency irrespective of the cel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2.4 Method of test | Initial conditions
Cell 1 shall include Cell 2 and Cell 4 as neighbouring cell in its System Information Block Type 11.
Cell 2 shall include Cell 1 and Cell 4 as neighbouring cell in its System Information Block Type 11.
Cell 4 shall include Cell 1 and Cell 2 as neighbouring cells in its System Information Block Type 1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.2.5 Test requirements | 1) In step c, the UE shall respond on Cell 1.
2) In step d, the UE shall not respond on Cell 4 or Cell 5.
3) In step e, the UE shall respond and camp on Cell 5.
4) In step i, the UE shall respond on Cell 2.
5) In step j, the UE shall respond on Cell 1.
6) In step m, the UE shall respond on Cell 5 within 6 mins. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3 Inter-RAT Cell Reselection / from GSM_Idle / GPRS Packet_Idle to a UTRA idle CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3.1 Definition | Test to verify that the UE performs the inter-RAT cell reselection from GSM_Idle/GPRS Packet_Idle to an allowed UTRA CSG cell correctly in FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3.2 Conformance requirement | 1. Inter-RAT reselection to an allowed CSG cell is supported when the UE is camped on another RAT. The UE requirements are defined in the specifications of the concerned RAT.
2. If a mobile station is a member of at least one Closed Subscriber Group, i.e. at least one CSG ID is included in the MS’s "Allowed CSG list", ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3.3 Test purpose | To test the behaviour of the UE idle mode reselection from GSM cell to an allowed UTRA CSG Cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3.4 Method of test | Initial condition
Three Cells, Cell 1, Cell 2 and Cell 9:
Cell
Radio Access Technology
CSG Identity
PLMN
LAC
Cell 9
GSM
-
PLMN 1
-
Cell 1
UTRAN
CSG1
PLMN 1
001
Cell 2
UTRAN
-
PLMN 1
002
Cell 1(UTRAN) is not in the 3G Neighbour Cell Description of Cell 9 (GSM).
Cell 1 is not in the cell info list of Cell 2.
Cell 1 shall... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.2.3.5 Test requirements | 1) In step b, the UE shall respond and camp on Cell 9.
2) In step d, the UE shall not respond and camp on Cell 1 or Cell 2.
3) In step f, the UE shall respond and camp on Cell 1. CSG 1 is added in UE’s Allowed CSG list.
4) In step h, the UE shall respond and camp on Cell 9.
5) In step j, the UE shall respond and camp o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3 Reselection from CSG Cell to CSG Cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1 Intra frequency CSG Cell Reselection | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1.2 Conformance requirement | 1. When camped normally, the UE shall execute the cell reselection evaluation process on the following occasions/triggers:
1.1 UE internal triggers, so as to meet performance as specified in TS 25.133 for FDD mode.
1.2 When information on the BCCH used for the cell reselection evaluation procedure has been modified.
2.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1.3 Test purpose | To verify that the UE reselects from a CSG cell to an allowed CSG cell on the same frequency if the detected CSG cell is the highest ranked cell, according to clause 5.2.6.1.4 of TS 25.304. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1.4 Method of test | Initial conditions
Two Cells, Cell 1 and Cell 2. Cell 1 and Cell 2 will be mapped to Cell 1 and Cell 2 respectively as found in TS 34.108 clause 6.1.4.
Cell 1 shall not include Cell 2 as a neighbouring cell in its System Information Block Type 11.
Cell 1 shall also include:
- “CSG Indicator” in its Master Information B... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.1.5 Test requirements | 1) In step c, the UE shall respond on Cell 1.
2) In step d, the UE shall not respond on Cell 2.
3) In step e, the UE shall respond and camp on Cell 2.
4) In step g, the UE shall respond on Cell 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.3.2 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4 Cell Reselection with Hybrid Cells | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.1 Inter-frequency Cell Reselection with Hybrid Cells | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.1.1 Definition | Test to verify that the UE shall use an autonomous search function to detect hybrid cells whose CSG IDs are in the UE's CSG whitelist and reselect it as a CSG cell correctly in FDD.
6.3.4.1.2 Conformance requirement
1. In case the UE has CSG ID of the hybrid cell in its CSG whitelist, cell reselection procedures will b... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.1.3 Test purpose | To test the behaviour of the UE idle mode inter-frequency cell reselection from non-CSG cell to a hybrid Cell whose CSG ID is in the UE's CSG whitelist. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.1.4 Method of test | Initial condition
1. Three Cells, Cell 1, Cell 4, Cell 5 as defined in TS 34.108 clause 6.1.4:
Cell
Radio Access Technology
PLMN
CSG Identity
Cell 1
UTRAN
PLMN 1
-
Cell 4
UTRAN
PLMN 1
-
Cell 5
UTRAN
PLMN 1
CSG 1
For Cell 1, SIB Configuration 6 is to be used for transmitting System Information Block Type 19 as per TS 34... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.1.5 Test requirements | 1) In step b, the UE shall respond and camp on Cell 1.
2) In step d, the UE shall respond and camp on Cell 5.
3) In step f, the UE shall respond and camp on Cell 1.
4) In step h, the UE shall respond and camp on Cell 5 in 6 mins.
Specific Message Contents
The contents of the SYSTEM INFORMATION BLOCK TYPE 19 message in ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2 Cell Reselection with Hybrid Cells for non-member UEs | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2.1 Definition | Test to verify that the non-member UE detects the cell is a hybrid cell and reselects it according to normal cell reselection rules correctly. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2.2 Conformance requirement | 1. In case the UE has CSG ID of the hybrid cell in its CSG whitelist, cell reselection procedures will be the same as for a CSG cell as described in Chapter 7.2.
For all other UEs, cell reselection procedures will utilise normal cell reselection rules.
2. In addition to normal cell reselection rules, the UE shall use a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2.3 Test purpose | To test the behaviour of the UE idle mode cell reselection from non-CSG cell to a hybrid Cell whose CSG ID is not in the UE's CSG whitelist. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2.4 Method of test | Initial condition
Same initial conditions as in clause 6.1.2.1.4 except the following:
1. Cell 2 shall include:
- “CSG Identity” in its System Information Block type 3 with the value “000 0000 0000 0000 0000 0000 0001”.
Cell 4 shall include:
- “CSG Identity” in its System Information Block type 3 with the value “000 00... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.3.4.2.5 Test requirements | Same test requirement as in clause 6.1.2.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4 WLAN Environment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1 WLAN Offload / Cell Selection / UTRA RRC_Idle to/from WLAN (Qrxlevmeas, BeaconRSSI) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1.2 Conformance requirement | 1. The UE is in UTRA RRC_IDLE state, and UE receives SystemInformationBlockType23 including RAN-assisted WLAN interworking data and configured with ThreshServingOffloadWLAN, Low and ThreshBeaconRSSIWLAN, High. When the UE measures that Serving cell has condition: Qrxlevmeas < ThreshServingOffloadWLAN, Low and the targe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1.3 Test purpose | 1. To verify that a UE initiates handover attach to WLAN after TsteeringWLAN when Serving cell has condition: Qrxlevmeas < ThreshServingOffloadWLAN, Low and the target WLAN AP has condition: BeaconRSSI > ThreshBeaconRSSIWLAN, High.
2. To verify that a UE initiates handover attach to UTRA cell after TsteeringWLAN WLAN A... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1.4 Method of test | Initial conditions
- Cell 1 and Cell 39 are configured. Cell 39 is switched off.
- System information configuration 11 as defined in TS 34.108 [18] clause 6.1.0a.2 is used in Cell 1.
- The UE is in PS+PS-DCCH+DTCH_Idle State 6-19 as specified in clause 7.4 of TS 34.108on Cell 1.
Step a-c:
Parameter
Unit
Cell 1
(UTRAN)
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.1.5 Test Requirements | 1) In Step c), UE shall offload the PDN to Cell 39.
2) In Step e), UE shall offload the PDN to Cell 1.
Specific Message Contents
The reference system configuration from TS 34.108 clause 6.1 is used in Cell 1, with the following modification:
SYSTEM INFORMATION BLOCK TYPE 23
Information Element
Condition
Value/remark
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2 WLAN Offload / Cell Selection / UTRA RRC_Idle to/from WLAN (Qrxlevmeas, BackhaulRateDlWLAN, WLAN identifier no match/match) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2.1 Definition | Test to Verify UE offload from UTRA RRC_Idle to WLAN when Qrxlevmeas < ThreshServingOffloadWLAN, Low and BackhaulRateDlWLAN > ThreshBackhRateDLWLAN, High and
Verify UE offload from WLAN to UTRA RRC_Idle when BackhaulRateDlWLAN < ThreshBackhRateDLWLAN, Low and Qrxlevmeas < ThreshServingOffloadWLAN, High.
Verify that t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2.2 Conformance requirement | The rules in this sub-clause are only applicable for WLANs for which identifiers have been signalled to the UE by UTRAN and the UE is capable of access network selection and traffic steering rules. Coexistence with ANDSF based WLAN selection and traffic steering methods on the UE is based on mechanism described in TS 2... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2.3 Test purpose | To test the behaviour of the UE idle mode offload to/from WLAN
1. UTRA RRC_Idle to WLAN when Qrxlevmeas < ThreshServingOffloadWLAN, Low and BackhaulRateDlWLAN > ThreshBackhRateDLWLAN, High
2. WLAN to UTRA RRC_Idle when BackhaulRateDlWLAN < ThreshBackhRateDLWLAN, Low and Qrxlevmeas < ThreshServingOffloadWLAN, High |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2.4 Method of test | Initial condition
- Cell 1 and Cell 39 are configured. Cell 39 is switched off.
- System information configuration 11 as defined in TS 34.108 [18] clause 6.1.0a.2 is used in Cell 1.
- UE is in PS+PS-DCCH+DTCH_Idle State 6-19 as specified in clause 7.4 of TS 34.108on Cell 1.
Step a-c:
Parameter
Unit
Cell 1
(UTRAN)
Test ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.2.5 Test requirements | 1) In Step b), UE shall not offload the PDN to Cell 39 after TsteeringWLAN.
2) In Step e), UE shall offload the PDN to Cell 39.
3) In Step g), UE shall offload the PDN to Cell 1
Specific Message Contents
The reference system configuration from TS 34.108 clause 6.1 is used in Cell 1, with the following modification:
SYS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.3 WLAN Offload / Cell Selection / UTRA RRC_Idle to/from WLAN (Qrxlevmeas, BackhaulRateUlWLAN) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.3.1 Definition | Test to Verify UE offload from UTRA RRC_Idle to WLAN when Qrxlevmeas < ThreshServingOffloadWLAN, Low and BackhaulRateUlWLAN > ThreshBackhRateULWLAN, High and
Verify UE offload from WLAN to UTRA RRC_Idle when BackhaulRateUlWLAN < ThreshBackhRateULWLAN, Low and Qrxlevmeas < ThreshServingOffloadWLAN, High.
6.3.4.1.3 Co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.3.3 Test purpose | To test the behaviour of the UE idle mode offload to/from WLAN:
1. UTRA RRC_Idle to WLAN when Qrxlevmeas < ThreshServingOffloadWLAN, Low and BackhaulRateUlWLAN > ThreshBackhRateULWLAN, High
2. WLAN to UTRA RRC_Idle when BackhaulRateUlWLAN < ThreshBackhRateULWLAN, Low and Qrxlevmeas < ThreshServingOffloadWLAN, High |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.3.4 Method of test | Initial condition
- Cell 1 and Cell 39 are configured. Cell 39 is switched off.
- System information configuration 11 as defined in TS 34.108 [18] clause 6.1.0a.2 is used in Cell 1.
- UE is in PS+PS-DCCH+DTCH_Idle State 6-19 as specified in clause 7.4 of TS 34.108on Cell 1.
Step a-c:
Parameter
Unit
Cell 1
(UTRAN)
Test ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.3.5 Test requirements | 1) In Step c), UE shall offload the PDN to Cell 39.
2) In Step e), UE shall offload the PDN to Cell 1.
Specific Message Contents
The reference system configuration from TS 34.108 clause 6.1 is used in Cell 1, with the following modification:
SYSTEM INFORMATION BLOCK TYPE 23
Information Element
Condition
Value/remark
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4 WLAN Offload / Cell Selection / UTRA RRC_Idle to/from WLAN (Qqualmeas, ChannelUtilizationWLAN) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4.2 Conformance requirement | 1. The UE is in UTRA RRC_IDLE state, and UE receives SystemInformationBlockType23 including RAN-assisted WLAN interworking data and configured with ThreshServingOffloadWLAN, Low and ThreshChUtilWLAN, Low. When the UE measures that Serving cell has condition: Qqualmeas < ThreshServingOffloadWLAN, Low and the target WLAN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4.3 Test purpose | 1. To verify that a UE initiates handover attach to WLAN after TsteeringWLAN when Serving cell has condition: Qqualmeas < ThreshServingOffloadWLAN, Low and the target WLAN AP has condition: ChannelUtilizationWLAN < ThreshChUtilWLAN, High.
2. To verify that a UE initiates handover attach to UTRA cell after TsteeringWLAN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4.4 Method of test | Initial conditions
- Cell 1 and Cell 39 are configured. Cell 39 is switched off.
- System information configuration 11 as defined in TS 34.108 [18] clause 6.1.0a.2 is used in Cell 1.
- The UE is in PS+PS-DCCH+DTCH_Idle State 6-19 as specified in clause 7.4 of TS 34.108on Cell 1.
Step a-c:
Parameter
Unit
Cell 1
UTRA RF ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.4.5 Test Requirements | 1) In Step c), UE shall offload the PDN to Cell 39.
2) In Step e), UE shall offload the PDN to Cell 1.
Specific Message Contents
The reference system configuration from TS 34.108 clause 6.1 is used in Cell 1, with the following modification:
SYSTEM INFORMATION BLOCK TYPE 23
Information Element
Condition
Value/remark
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 6.4.5 Void | 7 Layer 2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 7.1 MAC | General
If not otherwise mentioned, the same procedures as used in RRC test specification (TS 34.123-1 clause 8) or in the generic setup procedures (TS 34.108 clause 7) applies to reach initial conditions for MAC testing.
If not explicitly described, the same message contents and settings are applied as described in th... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.