hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.14.2 Conformance requirement | The UE shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION SETUP message with the value of the variable INITIAL_UE_IDENTITY.
If the values are different, the UE shall:
1> ignore the rest of the message.
If the values are identical, the UE shall:
----------------
----------------
2> if... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.14.5 Test requirement | In step 4 the UE shall transmit a RRC CONNECTION SETUP COMPLETE message on Radio Bearer Id: 2 and establish a RRC connection. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.15 RRC Connection Establishment using the default configuration for 13.6 kbps signalling bearers | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.15.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.15.2 Conformance requirement | The UE shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION SETUP message with the value of the variable INITIAL_UE_IDENTITY.
If the values are different, the UE shall:
1> ignore the rest of the message.
If the values are identical, the UE shall:
----------------
----------------
2> if... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.15.5 Test requirement | In step 4 the UE shall transmit a RRC CONNECTION SETUP COMPLETE message on Radio Bearer Id: 2 and establish an RRC connection. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16 RRC Connection Establishment / Domain Specific Access Control: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16.1 Definition | This test case is applicable for Rel-5 UEs supporting DSAC and Rel-6 or later UEs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16.2 Conformance requirement | Access Class related cell access restrictions shall be checked by the UE before sending an RRC connection request message when entering Connected Mode from UTRAN Idle mode.
…
With respect to Domain Specific Access Control, the UE shall:
1> if the IE "Multiple PLMN List" is not included in the Master Information Block:
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16.3 Test purpose | To confirm that the UE establishes a RRC Connection on the non-barred domain under the Domain Specific Access Restriction. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: Idle state (state 7) as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statements
The- Support of DSAC Yes/No.
Support of DSAC Yes/No.Test Procedure
The UE is in idle mode. The SS transmits a PAGING TYPE 1 message to inform the UE to change the system inf... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.16.5 Test requirement | At step4, the UE transmits a RRC CONNECTION REQUEST message to the SS for establishing the non-barred domain service.
At step6, the UE transmits a RRC CONNECTION SETUP COMPLETE message to the SS on uplink DCCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17 RRC Connection Establishment for transition from Idle Mode to CELL_DCH: Success (start of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DCH and fully support F-DPCH or all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17.2 Conformance requirement | In case the procedure was triggered by reception of a RRC CONNECTION SETUP message, the UE shall:
1> transmit a RRC CONNECTION SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are met:
1> the UE is in Idle... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17.3 Test purpose | To confirm that the UE establishes a signalling radio bearer mapped to HS-DSCH and E-DCH according to the received RRC CONNECTION SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: Registered Idle Mode on PS (state 3), or CS/PS (state 7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD) or E-PUCH (TDD)
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.17.5 Test requirements | After step 2, the UE shall transmit a RRC CONNECTION SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.18 RRC Connection Establishment using the default configuration for HS-DSCH / E-DCH signalling bearers | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.18.1 Definition | All UEs which support FDD and HS-PDSCH and E-DCH and fully support F-DPCH or all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.18.2 Conformance requirement | The UE shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION SETUP message with the value of the variable INITIAL_UE_IDENTITY.
If the values are different, the UE shall:
1> ignore the rest of the message.
If the values are identical, the UE shall:
----------------
----------------
2> if... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.18.5 Test requirement | At step 4 the UE shall transmit a RRC CONNECTION SETUP COMPLETE message on Radio Bearer Id: 2 and establish an RRC connection. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19 RRC Connection Establishment for transition from Idle Mode to CELL_DCH: Success (start of discontinuous uplink transmission and downlink reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19.2 Conformance requirement | The UE shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION SETUP message with the value of the variable INITIAL_UE_IDENTITY.
If the values are different, the UE shall:
1> ignore the rest of the message.
If the values are identical, the UE shall:
…
1> submit an RRC CONNECTION SETUP COM... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19.3 Test purpose | To confirm that the UE establishes a signalling radio bearer mapped to HS-DSCH and E-DCH, with discontinuous transmission and reception according to the received RRC CONNECTION SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: Registered Idle Mode on PS (state 3), or CS/PS (state 7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
The UE transmi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.19.5 Test requirements | At step 3, the UE shall transmit a RRC CONNECTION SETUP COMPLETE message.
At step 4 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20 RRC Connection Establishment for transition from Idle Mode to CELL_FACH: Success (Start of HS-DSCH Reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20.1 Definition and applicability | All UEs which support FDD and HS-PDSCH in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20.2 Conformance requirement | The UE shall, in the transmitted RRC CONNECTION REQUEST message:
…
1> if the UE supports HS-DSCH reception in CELL_FACH state:
2> include the IE "HS-PDSCH in CELL_FACH" and set it to TRUE.
…
The UE shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION SETUP message with the value of the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20.3 Test purpose | To confirm that the UE establishes a signalling radio bearer mapped to HS-DSCH and RACH according to the received RRC CONNECTION SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: Registered Idle Mode on PS (state 3), or CS/PS (state 7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports HS-PDSCH in CELL_FACH
Test Procedure
The SS transmits System I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.20.5 Test requirements | After step 3 the UE shall establish the RRC connection, and transmit RRC CONNECTION SETUP COMPLETE message on the DCCH using PRACH physical resource specified in system information block messages. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21 RRC Connection Establishment: Reject with Frequency Info set to the same frequency band – Successful case | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21.2 Conformance requirement | When the UE receives an RRC CONNECTION REJECT message on the downlink CCCH, it shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION REJECT message with the value of the variable INITIAL_UE_IDENTITY:
If the values are different, the UE shall ignore the rest of the message;
If the values... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21.3 Test purpose | To confirm that the UE retries to establish RRC connection in a suitable cell on the designated UTRA carrier, if it receives an RRC CONNECTION REJECT message including the optional IE "redirection info" referencing frequencies in the same band, but having different Qrxlevmin values and if a suitable cell on the designa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21.4 Method of test | Initial Condition
System Simulator: 2 cells – both cell 1 and cell 4 are active and cell 1 is suitable for camping.
Table 8.1.2.21Parameter
Unit
Cell 1
Cell 4
T0
T1
T2
T3
T0
T1
T2
T3
UTRA RF Channel Number
Mid Range Test Frequency
High Range Test Frequency
CPICH Ec (FDD)
dBm/3.84 MHz
-60
-60
-60
-60
Non Suitable
-70
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.21.5 Test requirement | After step 4 the UE shall have successfully selected cell 4. UE shall trigger the start of RRC connection establishment by transmitting RRC CONNECTION REQUEST. The establishment cause shall be registration.
In step 8, the UE shall send the RRC CONNECTION SETUP COMPLETE message on the frequency indicated in the RRC CONN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.22 RRC Connection Establishment: Reject with Frequency Info set to the same frequency band – Unsuccessful case | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.22.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.22.2 Conformance requirement | When the UE receives an RRC CONNECTION REJECT message on the downlink CCCH, it shall compare the value of the IE "Initial UE identity" in the received RRC CONNECTION REJECT message with the value of the variable INITIAL_UE_IDENTITY:
If the values are different, the UE shall ignore the rest of the message;
If the values... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.22.3 Test purpose | To confirm that the UE retries to establish RRC connection in the original serving cell, if it receives an RRC CONNECTION REJECT message including the optional IE "redirection info" referencing frequencies in the same band, but having different Qrxlevmin values and if no suitable cell on the designated UTRA carrier is ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.22.5 Test requirement | After step 3 the UE shall have determined that the redirection is not possible and adhere to the “wait time” before re-transmitting an RRC CONNECTION REQUEST. The establishment cause shall be registration.
In step 8, the UE shall send the RRC CONNECTION SETUP COMPLETE message on the frequency indicated in the RRC CONNE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.23 Void | 8.1.2.23a Void |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.24 Void | 8.1.2.24a Void |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25 RRC Connection Establishment for transition from Idle Mode to CELL_FACH: Success (Start of E-DCH and HS-DSCH Reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25.1 Definition and applicability | All UEs which support 1.28Mcps TDD and E-DCH and HS-PDSCH in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25.2 Conformance requirement | The UE shall, in the transmitted RRC CONNECTION REQUEST message:
…
1> if the UE supports MAC-ehs:
2> include the IE "MAC-ehs support" and set it to TRUE.
1> if the UE supports HS-DSCH reception in CELL_FACH state:
2> include the IE "HS-PDSCH in CELL_FACH" and set it to TRUE.
1> if the UE supports Enhanced Uplink in CEL... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25.3 Test purpose | To confirm that the UE establishes a signalling radio bearer mapped to HS-DSCH and E-DCH according to the received RRC CONNECTION SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: Registered Idle Mode on PS (state 3), or CS/PS (state 7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Related ICS/IXIT statement(s)
- UE supports 1.28Mcps TDD
- UE supports HS-PDSCH in CELL_FACH
- UE supports E-DCH in CELL_FAC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.25.5 Test requirements | After step 3 the UE shall establish the RRC connection, and transmit RRC CONNECTION SETUP COMPLETE message on the DCCH using common E-DCH physical resource specified in system information block messages. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26 RRC Connection Establishment / Paging Permission with Access Control: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26.1 Definition | This test case is applicable for Rel-8 or later UEs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26.2 Conformance requirement | Access Class related cell access restrictions shall be checked by the UE before sending an RRC connection request message when entering Connected Mode from UTRAN Idle mode. Access Class related cell access restrictions, if it is sent as a part of Domain Specific Access Restriction parameters, shall also be checked by t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26.3 Test purpose | To confirm that the UE responds to a paging request even when under access class barring. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: Idle state (state 7) as specified in clause 7.4 of TS 34.108
Test Procedure
The UE is in idle mode. The SS transmits a PAGING TYPE 1 message to inform the UE to change the system information and it needs to read new blocks of SYSTEM INFORMATION, in which the IE “Paging Pe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.26.5 Test requirement | At step 5, the UE transmits an RRC CONNECTION REQUEST message to the SS for establishing the non-barred domain service on uplink CCCH.
At step 7, the UE transmits an RRC CONNECTION SETUP COMPLETE message to the SS on uplink DCCH.
At step 12, the UE does not transmit an RRC CONNECTION REQUEST message to the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.2.27 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3 RRC Connection Release | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1 RRC Connection Release in CELL_DCH state: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1.2 Conformance requirement | 1. The UE shall receive and act on an RRC CONNECTION RELEASE message in states CELL_DCH and CELL_FACH. Furthermore this procedure can interrupt any ongoing procedures with the UE in the above listed states.
When the UE receives the first RRC CONNECTION RELEASE message, it shall:
…
- in state CELL_DCH:
- initialise the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1.3 Test purpose | To verify:
1. that the UE when receiving an RRC CONNECTION RELEASE message transmits N308+1 RRC CONNECTION RELEASE COMPLETE messages before release of radio resources and entering into idle mode
2. that the time between UE transmissions of the RRC CONNECTION RELEASE COMPLETE message is equal to the value of the T308 ti... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: CELL_DCH state (state 6-1 or state 6-3) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE
Test Procedure
The UE is brought to the CELL_DCH state by prompting the operator to initiate an outgoing call. After the DCCH is established, ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.1.5 Test requirement | After step 2 the UE shall transmit N308 + 1 RRC CONNECTION RELEASE COMPLETE messages. The time between the transmissions shall be equal to the T308 timer value.
After step 3 the UE shall initiate the release of the L2 signalling radio bearer and dedicated resources and enter idle mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2 RRC Connection Release using on DCCH in CELL_FACH state: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2.2 Conformance requirement | The UE shall receive and act on an RRC CONNECTION RELEASE message in states CELL_DCH and CELL_FACH. Furthermore this procedure can interrupt any ongoing procedures with the UE in the above listed states.
When the UE receives the first RRC CONNECTION RELEASE message; and
1> if the message is received on the CCCH, and IE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2.3 Test purpose | To confirm that the UE releases the L2 signalling radio bearer and resources and goes back to the idle state after it receives an RRC CONNECTION RELEASE message on downlink DCCH from the SS. It shall transmit an RRC CONNECTON RELEASE COMPLETE message using acknowledged mode on uplink DCCH to the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: CELL_FACH state (state 6-2 or state 6-4) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is brought to an initial state of CELL_FACH. After the successful establishment of the RRC connection, on reception o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.2.5 Test requirement | After step 2 the UE shall transmit an RRC CONNECTION RELEASE COMPLETE message using acknowledged mode then it shall receive a response for this message from the SS-RLC.
After step 3 the UE shall release its L2 signalling radio bearers and radio resources, and then it shall go back to idle mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3 RRC Connection Release using on CCCH in CELL_FACH state: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3.2 Conformance requirement | The UE shall receive and act on an RRC CONNECTION RELEASE message in states CELL_DCH and CELL_FACH. Furthermore this procedure can interrupt any ongoing procedures with the UE in the above listed states.
When the UE receives the first RRC CONNECTION RELEASE message; and
1> if the message is received on the CCCH, and IE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3.3 Test purpose | To confirm that the UE releases all its radio resources upon the reception of a RRC CONNECTION RELEASE message on the downlink CCCH, without transmitting RRC CONNECTION RELEASE COMPLETE message on the uplink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: CELL_FACH state (state 6-2 or state 6-4) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is brought to an initial state of CELL_FACH. After the successful establishment of the RRC connection, on reception o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.3.5 Test requirement | After step 2 the UE shall release all its radio resources, return to idle mode, without transmitting RRC CONNECTION RELEASE COMPLETE message on the uplink direction. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4 RRC Connection Release in CELL_FACH state: Failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4.2 Conformance requirement | When acknowledged mode was used and RLC does not succeed in transmitting the RRC CONNECTION RELEASE COMPLETE message, the UE shall:
1> release all its radio resources;
1> indicate the release of the established signalling connections (as stored in the variable ESTABLISHED_SIGNALLING_CONNECTIONS) and established radio a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4.3 Test purpose | To confirm that the UE releases all its radio resources and enters idle mode when the UE does not succeed in transmitting the RRC CONNECTION RELEASE COMPLETE message using acknowledged mode to the SS (i.e. the UE-RLC does not receive an acknowledgement for the transmission of the RRC CONNECTION RELEASE COMPLETE message... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: CELL_FACH state (state 6-2 or state 6-4) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE
Test Procedure
At the start of the test, the UE is brought to CELL_FACH state. When the RRC connection has been established, on reception of ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.4.5 Test requirement | After step 3 the UE shall release its L2 signalling radio bearers and radio resources then it shall go to idle mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5 RRC Connection Release in CELL_FACH state: Invalid message | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5.2 Conformance requirement | If the RRC CONNECTION RELEASE message contains a protocol error causing the variable PROTOCOL_ERROR_REJECT to be set to TRUE according to TS 25.331 clause 9, and if the "protocol error cause" in PROTOCOL_ERROR_INFORMATION is set to any cause value except "ASN.1 violation or encoding error", the UE shall perform procedu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5.3 Test purpose | When the UE receives an invalid RRC CONNECTION RELEASE message on the downlink DCCH, it shall transmit an RRC CONNECTION RELEASE COMPLETE message that includes the appropriate error cause on the uplink DCCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: CELL_FACH state (state 6-2 or state 6-4) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is initially in CELL FACH state. on reception of (CM) service request message from the UE, the SS will Send CM Service... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.5.5 Test requirement | After step 8 the UE shall transmit an RRC CONNECTION RELEASE COMPLETE message which includes the appropriate cause values in IE "Protocol error information".
After step 12 the UE shall be in IDLE state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6 RRC Connection Release in CELL_DCH state (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6.2 Conformance requirement | If the UE first receives an RRC CONNECTION RELEASE message in CELL_DCH state, it shall:
- initialize the counter V308 to zero;
- submit an RRC CONNECTION RELEASE COMPLETE message to the lower layers for transmission using UM RLC on the DCCH to the UTRAN;
- start timer T308 when the RRC CONNECTION RELEASE COMPLETE messa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6.3 Test purpose | To confirm that when the UE receives an RRC CONNECTION RELEASE message the UE transmits N308+1 RRC CONNECTION RELEASE COMPLETE messages using UM on DCCH.
To confirm that the UE enters into idle mode with performing cell-selection and selecting new cell configured by SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE
Specific Message Content
For system information block 11 for Cell 1 (gives IE's... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.6.5 Test requirement | After step 6 the UE shall start to transmit N308 + 1 times RRC CONNECTION RELEASE COMPLETE messages using UM on DCCH.
After step 11 the UE shall be in Idle mode in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.7 RRC Connection Release in CELL_FACH state (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.1.3.7.2 Conformance requirement | When the UE receives the first RRC CONNECTION RELEASE message
the UE shall:
1> in state CELL_FACH:
2> if the RRC CONNECTION RELEASE message was received on the DCCH:
3> when the successful transmission of the RRC CONNECTION RELEASE COMPLETE message has been confirmed by the lower layers:
4> release all its radio resour... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.