hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.31.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH_FACH (state 6-8) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
The UE is in CELL_FACH state. Only signalling rad... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.31.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32 Radio Bearer Establishment for transition from CELL_FACH to CELL_DCH: Success (start of HS-DSCH reception with frequency modification) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> the UE is in CELL_DCH ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32.3 Test purpose | To confirm that the UE establishes a radio bearer mapped to HS-DSCH according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
SYSTEM INFORMATION BLOCK TYPE 3 (see specific message contents)
UE: PS_DCCH_FACH (state 6-8) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.32.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33.2 Conformance requirement | If the UE receives:
- a RADIO BEARER SETUP message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (FDD only);
1> act upon all received information e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33.3 Test purpose | To confirm that the UE establishes a new radio bearer according to a RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: CS-DCCH_DCH (state 6-5) or PS-DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Specific Message Content
For SIB type 1 message to be transmitted throughout the test, use the message titled “System Information ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.33.5 Test requirement | After step 1 the UE shall transmit a RADIO BEARER SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration with frequency modification) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34.2 Conformance requirement | If the UE receives:
- a RADIO BEARER SETUP message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (FDD only);
1> act upon all received information e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34.3 Test purpose | To confirm that the UE establishes a new radio bearer according to a RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
UE: CS-DCCH_DCH (state 6-5) or PS-DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Specific Message Content
For SIB type 1 message to be transmitted throughout the test,... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.34.5 Test requirement | After step 1 the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
8.2.1.34a Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration with inter band handover)
8.2.1.34a.1 Definition
This test case is identical to test case 8.2.1.34 except that the cells bel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (start of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH and E-DCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions are met:
1> the UE is in CELL_DCH s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35.3 Test purpose | To confirm that the UE establishes a radio bearer mapped to HS-DSCH and E-DCH according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE supports E-PUCH (TDD only)
Test Procedure
The UE is in CELL_DCH state. Only signalling radio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.35.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
8.2.1.35a Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (start of E-DCH transmission, in the multi-frequency network environment, for 1.28 Mcps TDD only)
8.2.1.35a.1 Definition and applicability
All UEs which suppo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (hard handover to another frequency, start of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36.1 Definition | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to TRUE only when all the following conditions are met:
1> the UE is in CELL_DCH s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36.3 Test purpose | To confirm that the UE performs a hard handover to another frequency, establishes a radio bearer mapped on E-DCH and starts E-DCH transmission according to the received a RADIO BEARER SETUP message. Un-synchronised RB Setup is tested here. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statements
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE supports E-PUCH (TDD only)
Specific Message Conten... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.36.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
8.2.1.36a Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH using F-DPCH: Success (hard handover to another frequency, start of E-DCH transmission, F-DPCH configured)
8.2.1.36a.1 Definition
All UEs which support FDD and HS-PDSC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.37 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (start of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38.2 Conformance requirement | 1> if any of the IEs "DTX-DRX timing information" or "DTX-DRX information" are stored in the UE:
2> determine the value for the DTX_DRX_STATUS variable and take the corresponding actions as described in subclause 8.5.34.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfigu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38.3 Test purpose | To confirm that the UE establishes a radio bearer mapped to HS-DSCH and E-DCH and enables discontinuous uplink DPCCH transmission according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
The UE is in CELL_DCH state. Only signalling radio bearers have been established, mapped to DPCH.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.38.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE.
At step 3 the time between 11 consecutive CQI indications shall be 320ms if 2ms TTI is used, or 400ms if 10ms TTI is used. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (start of HS-SCCH less operation) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39.1 Definition and applicability | All UEs which support FDD and HS-SCCH less operation. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39.2 Conformance requirement | If the UE receives:
- a RADIO BEARER SETUP message; or
…
it shall:
…
1> if any of the IEs "DTX-DRX timing information" or "DTX-DRX information" are stored in the UE:
2> determine the value for the DTX_DRX_STATUS variable and take the corresponding actions as described in subclause 8.5.34.
…
If the UE receives RRC CONNE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39.3 Test purpose | To confirm that the UE establishes a radio bearer mapped to HS-DSCH and E-DCH and enables HS-SCCH less operation according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports HS-SCCHless HS-DSCH
Test Procedure
The UE is in CELL_DCH state. Only signalling radio bearers have been established.
The test operator is prompted... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.39.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE.
After step 3, the UE shall transmit a UE CAPABILITY INFORMATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (hard handover to another frequency, start of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40.1 Definition | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER SETUP message, the UE shall:
1> transmit a RADIO BEARER SETUP COMPLETE as response message on the uplink DCCH using AM RLC.
…
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40.3 Test purpose | To confirm that the UE performs a hard handover to another frequency, establishes a radio bearer mapped to HS-DSCH and E-DCH and enables discontinuous uplink DPCCH transmission according to the received RADIO BEARER SETUP message. Un-synchronised RB Setup is tested here. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statements
- UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Specific Message Content
For SIB type 1 message to be transmitted throu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.40.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
At step 3 the time between 11 consecutive CQI indications shall be 320ms if 2ms TTI is used, or 400ms if 10ms TTI is used. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (UL DPCCH slot format #4) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41.1 Definition and applicability | All UEs which support FDD and Slot Format #4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41.2 Conformance requirement | If the IE "Uplink DPCH info" is included, the UE shall:
For FDD:
1> release any active uplink physical channels and activate the given physical channels;
1> if the IE "Number of FBI bits" is not included:
2> use 0 FBI bits in the Uplink DPCH.
1> if the IE "Number of TPC bits" is not included:
2> use 2 TPC bits in the U... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41.3 Test purpose | To confirm that the UE is able to establish a radio bearer mapped on E-DCH/HS-DSCH, with signalling radio bearers mapped on E-DCH/HS-DSCH together with use of F-DPCH and UL DPCCH slot format #4, according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports Slot Format #4
Test Procedure
The UE is in CELL_DCH state. Only signalling radio bearers have been established.
The test operator is prompted to m... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.41.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.42 Radio Bearer Establishment for transition from CELL_FACH (Enhanced UL/DL) to CELL_DCH : Success (with ongoing HS-DSCH reception and E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.42.1 Definition and applicability | UE supports FDD and Enhanced Uplink in CELL_FACH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.42.2 Conformance requirement | Extract from 25.331
If after state transition the UE enters CELL_DCH state, the UE shall, after the state transition:
1> in FDD; or
1> in TDD when "Primary CCPCH Info" is included indicating a new target cell and "New C-RNTI" is not specified:
2> remove any C-RNTI from MAC;
2> clear the variable C_RNTI.
1> determine th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.42.4 Method of test | Initial Conditions
System Simulator: 1 cell.
UE: PS-DCCH Enhanced CELL_FACH (state 6-8) as specified in clause 7.4 of TS 34.108 with SRB mapping on common E-DCH /HS-DSCH
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports of common E-DCH
Test Procedure
The UE is in Enhanced CELL_FACH state, Only signalling ra... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.42.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43 Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (start of E-DCH transmission with enhanced TS0) (1.28 Mcps TDD) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43.1 Definition and applicability | All UEs which support 1.28Mcps TDD and HS-PDSCH and E-DCH and enhanced TS0. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43.2 Conformance requirement | Same conformance requirement as in clause 8.2.1.35.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43.3 Test purpose | To confirm that the UE establishes a radio bearer mapped to HS-DSCH(include TS0) and E-DCH according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43.4 Method of test | Initial Condition
System Simulator: 1 cell, cell1 configures 3 carrier frequency, one is primary frequency, other are secondary frequencies. The frequency relation show as below:
Parameter
Cell 1
UTRA RF Channel Number1
Ch. 1
UTRA RF Channel Number2
Ch. 2
UTRA RF Channel Number3
Ch.3
UE: PS_DCCH_DCH (state 6-7) as spec... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.43.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRBs mapped on DCH: Successful Activation of 3C-HSDPA and 4C-HSDPA for different bands | NOTE: The Radio Bearer Establishment test case 8.2.1.44 for 3C/4C-HSDPA has been split in to Single band and Dual Band test cases. The test cases have been designed to cover 3C-HSDPA / 4C-HSDPA carrier combinations that will enable testing of all UEs supporting FDD HS-DSCH physical layer categories 29, 30, 31 or 32. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRB on DCH: Successful Activation of 3C-HSDPA for single band | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1.1 Definition and applicability | All UE categories (Cat 29, 30, 31 and 32) which supports 3C-HSDPA and 64 QAM.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1.2 Conformance requirement | If the UE receives:
- a RADIO BEARER SETUP message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (FDD only);
1> act upon all received information e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1.3 Test purpose | To confirm that the UE establishes radio bearer mapped to HS-DSCH, transits from CELL_DCH to CELL_DCH state, and starts simultaneous 64QAM reception over multi Carriers (single band 3C) according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1.4 Method of test | Initial Condition
System Simulator:
SS configures cells as per Table 5.0aB of TS 25.101 [21].
3 cells –Cell 1/2/3 3C HSDPA cell(s) with Cell 1(Anchor Carrier), Cell 2 and Cell 3 (Secondary Carriers) on DL Band A –UE: CELL_DCH (state 6-5 or state 6-7) as specified in clause 7.4 of TS 34.108 [9], depending on the CN doma... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.1.5 Test requirements | At step 2 the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
At step 5 the UE shall transmit CQI reports for the 3 cells.
At step 4 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRB mapped on DCH : Successful Activation of 3C-HSDPA for dual bands (1-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2.1 Definition and applicability | All UE categories (Cat 29, 30, 31 and 32) which support combination of 3C-HSDPA, and 64 QAM.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2.2 Conformance requirement | Same as subclause 8.2.1.44.1.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2.3 Test purpose | To confirm that the UE establishes radio bearer mapped to HS-DSCH, transits from CELL_DCH to CELL_DCH state, and starts simultaneous 64QAM reception over multi Carriers (dual band 3C carriers 1-2) according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2.4 Method of test | Initial Condition
System Simulator:
SS configures cells as per Table 5.0aC of TS 25.101 [21].
3 cells –Cell 1/2/3 3C HSDPA cell(s) with Cell 1(Anchor Carrier), Cell 2 and Cell 3 (Secondary Carriers) – One Anchor Carrier on DL Band A and two Secondary Carriers on DL Band B (Dual Band 3C HSDPA)
UE: CELL_DCH (state 6-5 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.2.5 Test requirements | Same as subclause 8.2.1.44.1.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRBs mapped on DCH: Successful Activation of 3C-HSDPA for Dual bands (2-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3.1 Definition and applicability | All UE categories (Cat 29, 30, 31 and 32) which support combination of 3C-HSDPA, and 64 QAM.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3.2 Conformance requirement | Same as subclause 8.2.1.44.1.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3.3 Test purpose | To confirm that the UE establishes radio bearer mapped to HS-DSCH, transits from CELL_DCH to CELL_DCH state, and starts simultaneous 64QAM reception over multi Carriers (dual band 3C carriers 2-1) according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3.4 Method of test | Initial Condition
System Simulator:
SS configures cells as per Table 5.0aC of TS 25.101 [21].
3 cells –Cell 1/2/3 3C HSDPA cell(s) with Cell 1(Anchor Carrier), Cell 2 and Cell 3 (Secondary Carriers) – One Anchor Carrier and one secondary carrier on DL Band A and one Secondary Carriers on DL Band B (Dual Band 3C HSDPA)... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.3.5 Test requirements | Same as subclause 8.2.1.44.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRBs mapped on DCH: Successful Activation of 4C-HSDPA for Dual Bands (3-1) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4.1 Definition and applicability | All UE categories (Cat 31 and 32) which support combination of 4C-HSDPA, and 64 QAM.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4.2 Conformance requirement | Same as subclause 8.2.1.44.1.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4.3 Test purpose | To confirm that the UE establishes radio bearer mapped to HS-DSCH, transits from CELL_DCH to CELL_DCH state, and starts simultaneous 64QAM reception over multi Carriers (dual band 4C carriers 3-1) according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4.4 Method of test | Initial Condition
System Simulator:
SS configures cells as per Table 5.0aC of TS 25.101[21].
4 cells –Cell 1/2/3/4 4C HSDPA cell(s) with Cell 1 (Anchor Carrier) and Cell 2, Cell 3 and Cell 4 (Secondary Carriers) – One Anchor Carrier and two Secondary Carrier on DL Band A and one Secondary Carriers on DL Band B (Dual B... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.4.5 Test requirements | At step 3 the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
At step 6 the UE shall transmit CQI reports for the 4 cells.
At step 5 the UE shall transmit UE CAPABILITY INFORMATION on SRB2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5 Radio Bearer Establishment for transition between CELL_DCH & CELL_DCH with SRBs mapped on DCH: Successful Activation of 4C-HSDPA for Dual Bands (2-2) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5.1 Definition and applicability | All UE categories (Cat 31 and 32) which support combination of 4C-HSDPA, and 64 QAM.
UE supports FDD. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5.2 Conformance requirement | Same as in subclause 8.2.1.44.1.2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5.3 Test purpose | To confirm that the UE establishes radio bearer mapped to HS-DSCH, transits from CELL_DCH to CELL_DCH state, and starts simultaneous 64QAM reception over multi Carriers (dual band 4C carriers 2-2) according to the received RADIO BEARER SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5.4 Method of test | Initial Condition
System Simulator:
SS configures cells as per Table 5.0aC of TS 25.101 [21].
4 cells –Cell 1/2/3/4 4C HSDPA cell(s) with Cell 1 (Anchor Carrier) and Cell 2, Cell 3 and Cell 4 (Secondary Carriers) – One Anchor Carrier and One Secondary Carrier on DL Band A and Two Secondary Carriers on DL Band B (Dual B... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.44.5.5 Test requirements | Same as in subclause 8.2.1.44.4.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.1.45 Radio Bearer Establishment for transition between CELL_DCH and CELL_DCH with SRBs mapped on DCH: Successful Activation of Multiflow HSDPA for Single and Dual bands/Intra Node B | NOTE: The Radio Bearer Reconfiguration test case 8.2.1.45 for Multiflow HSDPA has been split in to Single Frequency/Dual Cell on Single Band, Dual Frequency/Three Cells on Single Band and Dual Frequency/Three Cells on Dual bands test cases. The test cases have been designed to cover Multiflow HSDPA carrier combinations... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.