hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.12 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.13 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.14 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.15 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.16 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.17 Radio Bearer Reconfiguration from CELL_FACH to CELL_FACH: Success | 8.2.2.17.1 Definition |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.17.2 Conformance requirement | If the UE was in CELL_FACH state upon reception of the reconfiguration message and remains in CELL_FACH state, the UE shall:
1> if the IE "Frequency info" is included in the received reconfiguration message:
2> select a suitable UTRA cell according to TS 25.304 on that frequency;
2> if the received reconfiguration mess... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.17.3 Test purpose | To confirm that the UE establishes radio bearers according to a RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.17.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is in CELL_FACH state. The SS transmits a RADIO BEARER RECONFIGURATION message, to the UE. The UE configures the common physical channel and transmits a RADIO BEARER RECONFIGURAT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.17.5 Test requirement | After step 2 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18 Radio Bearer Reconfiguration from CELL_FACH to CELL_FACH: Success (Cell re-selection) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18.2 Conformance requirement | If the UE performs cell re-selection during the reconfiguration procedure, the UE shall:
1> initiate a cell update procedure, as specified in subclause 8.3.1;
1> continue with the reconfiguration procedure.
The UE shall transmit a response message as specified in TS 25.331 subclause 8.2.2.4, setting the information ele... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18.3 Test purpose | To confirm that the UE transmits RADIO BEARER RECONFIGURATION COMPLETE message in cell 2 when a cell re-selection occurs after receiving a RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active.
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.2.2.18
Parameter
Unit
Cell 1
Cell 2
T0
T1
T0
T1
UTRA RF Channel Number
Mid Range Test Frequency
Mid Range Test Frequency
CPICH Ec (FDD)
dBm/3.84MHz
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.18.5 Test requirement | After step 2 the UE shall transmit a CELL UPDATE message on the CCCH with IE "cell update cause" set to "cell reselection".
After step 5 UE shall transmit a UTRAN MOBILITY INFORMATION CONFIRM message on the DCCH using AM RLC.
The UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.19 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (Subsequently received) | 8.2.2.19.1 Definition |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.19.2 Conformance requirement | If the IE "RRC transaction identifier" is included in a received message, the UE shall perform the actions below. The UE shall:
If the received message is any of the messages:
- RADIO BEARER RECONFIGURATION; or
…
the UE shall:
2> if the variable ORDERED_RECONFIGURATION is set to TRUE; or
2> if the variable CELL_UPDATE_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.19.3 Test purpose | To confirm that if the UE receives a new RADIO BEARER RECONFIGURATION message before the UE configures the radio bearer according to a previous RADIO BEARER RECONFIGURATION message, it ignores the new RADIO BEARER RECONFIGURATION message and configures the radio bearer according to the previous RADIO BEARER RECONFIGURA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.19.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is in CELL_DCH state. SS transmits a RADIO BEARER RECONFIGURATION message to the UE before the U... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.19.5 Test requirement | After step 2 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.20 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.21 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.22 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23 Radio Bearer Reconfiguration from CELL_FACH to CELL_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23.2 Conformance requirement | If the UE receives:
- a RADIO BEARER RECONFIGURATION message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (for FDD only);
1> act upon all received... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23.3 Test purpose | To confirm that the UE transmits RADIO BEARER RECONFIGURATION COMPLETE message and enters CELL_PCH state after it received a RADIO BEARER RECONFIGURATION message, which invoke the UE to transit from CELL_FACH to CELL_PCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is in CELL_FACH state. The SS transmits a RADIO BEARER RECONFIGURATION message. The UE transmits a RADIO BEARER RECONFIGURATION COMPLETE message using AM RLC and enters CELL_PCH ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.23.5 Test requirement | After step 2 the UE shall transmit a RADIO BEARER RELEASE COMPLETE message on uplink DCCH using AM RLC.
After step 4 the UE shall be in URA_PCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.24 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.25 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (Incompatible Simultaneous Reconfiguration) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26.2 Conformance requirement | If the UE receives:
- a RADIO BEARER RECONFIGURATION message; or
…
The UE shall transmit a response message as specified in TS 25.331 subclause 8.2.2.4, setting the information elements as specified below. The UE shall:
…
If the IE "Ciphering mode info" is present and if the IE "Reconfiguration" in the variable CIPHERI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26.3 Test purpose | 1. To confirm that the UE ignores the subsequent security reconfiguration information which is contained in the RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE reconfigures according to the SECURITY MODE COMMAND message.
3. To confirm that the UE transmits RADIO BEARER RECONFIGURATION FAILURE message on... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is in CELL_DCH state. The SS transmits a SECURITY MODE COMMAND message. SS then transmits a RADI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.26.5 Test requirement | After step 2 the UE shall transmit a RADIO BEARER RECONFIGURATION FAILURE message on the DCCH using AM RLC and set the failure cause to "incompatible simultaneous reconfiguration".
After step 3 the UE shall transmit a SECURITY MODE COMPLETE message on the DCCH using AM RLC specified in step 1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27.2 Conformance requirement | If the UE receives:
-a RADIO BEARER RECONFIGURATION message;
it shall:
1> perform the physical layer synchronisation procedure as specified in TS 25.214 for FDD and TS 25.224 for TDD;
1> act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified in the following and perform the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27.3 Test purpose | 1. To confirm that the UE transits from CELL_DCH to CELL_DCH according to the RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE transmits the RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a dedicated physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
UE: CS-DCCH_DTCH_DCH (state 6-9) or PS_DCCH_DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
Table 8.2.2.27
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.27.5 Test requirement | After step 3 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 6.
After step 4 the UE shall be in CELL_DCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_FACH (Transport channel type switching with frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28.2 Conformance requirement | If the UE receives:
- a RADIO BEARER RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified in the following and perform the actions below.
1> enter a state according to TS 25.331 subclause 8.6.3.3.
In case the UE receives a RADIO BEARE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28.3 Test purpose | 1. To confirm that the UE transits from CELL_DCH to CELL_FACH according to the RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE transmits RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a common physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 in active and cell 6 is inactive.
UE: "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.28.5 Test requirement | After step 6 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 7 the UE shall be in CELL_FACH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.29 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.30 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31.2 Conformance requirement | If the UE receives:
…
-a RADIO BEARER RECONFIGURATION message; or
…
it shall:
…
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214 (FDD only);
1> act upon all receive... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31.3 Test purpose | 1. To confirm that the UE transits from CELL_FACH to CELL_DCH according to the RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE transmits RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a dedicated physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.2.2.31
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA RF Channel Number
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.31.5 Test requirement | After step 3 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 6.
After step 4 the UE shall be in CELL_DCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32 Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_FACH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32.1 Definition | - |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32.2 Conformance requirement | If the UE receives:
-a RADIO BEARER RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified in the following and perform the actions below.
1> enter a state according to TS 25.331 subclause 8.6.3.3.
In case the UE receives a RADIO BEARER... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32.3 Test purpose | 1. To confirm that the UE transits from CELL_FACH to CELL_FACH according to the RADIO BEARER RECONFIGURATION message.
2. To confirm that the UE transmits RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a common physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
UE: "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE. If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mod... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.32.5 Test requirement | After step 6 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 6.
After step 7 the UE shall be in CELL_FACH state of cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.33 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34 Radio Bearer Reconfiguration for transition from CELL_FACH to URA_PCH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34.2 Conformance requirement | If the UE receives:
-a RADIO BEARER RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified in the following and perform the actions below.
1> enter a state according to TS 25.331 subclause 8.6.3.3.
In case the UE receives a RADIO BEARER... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34.3 Test purpose | 1. To confirm that the UE transmits a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To confirm that the UE transits from CELL_FACH to URA_PCH according to the RADIO BEARER RECONFIGURATION message.
3. To confirm that the UE selects a common physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 are active
UE: Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mode on... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.34.5 Test requirement | After step 6 the UE shall transmits a RADIO BEARER RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 1.
After step 8 the UE shall be in URA_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35 Radio Bearer Reconfiguration from CELL_DCH to CELL_FACH: Successful channel switching with multiple PS RABs established | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35.2 Conformance requirement | If the IE "RB information to release" is included, the UE shall apply the following actions on the radio bearer identified with the value of the IE "RB identity". The UE shall:
1> if the IE "RB identity" is set to a value less than 4:
2> set the variable INVALID_CONFIGURATION to TRUE.
1> if the IE "RB identity" refers ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35.3 Test purpose | To confirm that the UE transit from CELL_DCH to CELL_FACH state according to a RADIO BEARER RECONFIGURATION message when having two radio access bearers established.
To confirm that the UE transit from CELL_FACH to CELL_DCH state according to a RADIO BEARER RECONFIGURATION message when having two radio access bearers e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35.4 Method of test | Initial Condition
System Simulator: 1 cell.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH + DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statements
Support of PS service Yes/No
Secondary PDP context activation procedure Yes/No
Test Procedure
The UE is in... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.35.5 Test requirement | After step 3 the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
After step 6 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 7 the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 12 the UE shall transmit a RADIO BEARER RELEASE COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start and stop of HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36.3 Test purpose | To confirm that the UE starts and stops receiving the HS-DSCH according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DTCH_HS_DSCH (state 6-17) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
The UE is in CELL_DCH state and has a radio bearer mapped on HS-DSCH established. The SS transmits a RADI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.36.5 Test requirements | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 5, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
8.2.2.36a Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start and stop of HS-DSCH reception) (TDD only)
8.2.2.36a.1 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_FACH and from CELL_FACH to CELL_DCH: Success (start and stop of HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37.3 Test purpose | To confirm that the UE transits to CELL_FACH state from CELL_DCH state and stops receiving the HS-DSCH according to the received RADIO BEARER RECONFIGURATION message.
To confirm that the UE transits to CELL_DCH state from CELL_FACH state and starts receiving the HS-DSCH according to the received RADIO BEARER RECONFIGUR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH_FACH (state 6-8) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
The UE is in CELL_FACH state and SS establishes a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.37.5 Test requirements | After step 4, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message.
After step 6, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38 Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (with active HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38.3 Test purpose | To confirm that the UE reconfigures the radio bearer while being mapped to HS-DSCH according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS_DCCH_DTCH_HS_DSCH (state 6-17) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
The UE is in CELL_DCH state and has a radio bearer mapped on HS-DSCH established. The SS transmits a RADI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.38.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39 Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Timing re-initialised hard handover to another frequency, start and stop of HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39.2 Conformance requirement | In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable HS_DSCH_RECEPTION shall be set to "TRUE" only when all the following conditions are met:
1> th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39.3 Test purpose | To confirm that the UE starts and stops receiving the HS-DSCH in conjunction with a interfrequency hard handover without prior measurement on the target frequency according to the received RADIO BEARER RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.2.39.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 and 6 are active.
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
Table 8.2.2.39
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA RF Channel Number
Mid Range... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.