hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.12.3 Test purpose | To confirm that the UE initiates a cell update procedure after it fails to reconfigure the new physical channel and selects another cell.
To confirm that UE transmits a PHYSICAL CHANNEL RECONFIGURATION FAILURE message after UE completes cell update procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.12.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active.
UE: PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108 in cell 1
NOTE: The 'timer poll' value in the SS RLC transmit entity should be set to 800 ms.
Test Procedure
Table 8.2.6.12
Parameter
Unit
Cell 1
Cell 2
T0
T1
T0
T1
UTRA RF Ch... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.12.5 Test requirement | After step 2 the UE shall transit from CELL_DCH to CELL_FACH and transmit a PHYSICAL CHANNEL RECONFIGURATION message on the common physical channel.
After step 6 the UE shall transmit a CELL UPDATE message using RLC-TM mode on the uplink CCCH with IE "Cell update cause" set to "cell reselection" in cell 2.
After step 8... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.13 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14 Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH: Failure (Invalid message reception and Invalid configuration) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14.2 Conformance requirement | If the received reconfiguration message contains a protocol error causing the variable PROTOCOL_ERROR_REJECT to be set to TRUE according to TS 25.331 clause 9, the UE shall perform procedure specific error handling as follows. The UE shall:
1> transmit a failure response message as specified in TS 25.331 subclause 8.2.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14.3 Test purpose | To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION FAILURE message on the DCCH using AM RLC if the received message does not include any IEs except IE "Message Type".
To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION FAILURE message on the DCCH using AM RLC if it receives a PHYSICAL C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108
Test Procedure
The UE is in CELL_DCH state. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message to the UE to invoke the UE to transit from CELL_DCH to CELL_FACH. The UE shall reconfigure the comm... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.14.5 Test requirement | After step 2 the UE shall transit from CELL_DCH to CELL_FACH and transmit a PHYSICAL CHANNEL RECONFIGURATION message on the common physical channel.
After step 3a, the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH, reporting the RLC buffer payload of each RBs mapped on RACH at every 8s interval.
Aft... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.15 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.16 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (code modification): Success (Subsequently received) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17.2 Conformance requirement | If the IE "RRC transaction identifier" is included in a received message, the UE shall perform the actions below. The UE shall:
If the received message is any of the messages:
- PHYSICAL CHANNEL RECONFIGURATION; or
…
the UE shall:
2> if the variable ORDERED_RECONFIGURATION is set to TRUE; or
2> if the variable CELL_UPD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17.3 Test purpose | To confirm that if the UE receives a PHYSICAL CHANNEL RECONFIGURATION message before the UE reconfigures the radio bearer according to the previous PHYSICAL CHANNEL RECONFIGURATION message it ignores the new PHYSICAL CHANNEL RECONFIGURATION message and reconfigures according to the previous PHYSICAL CHANNEL RECONFIGURA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) supported by the UE.
Test Procedure
The UE is in the CELL_DCH state. When the SS transmits a PHYSICAL CHANNEL RECONFIGURATION message to the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.17.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18 Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH: Success (Subsequently received) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18.2 Conformance requirement | If the IE "RRC transaction identifier" is included in a received message, the UE shall perform the actions below. The UE shall:
If the received message is any of the messages:
- PHYSICAL CHANNEL RECONFIGURATION; or
…
the UE shall:
2> if the variable ORDERED_RECONFIGURATION is set to TRUE; or
2> if the variable CELL_UPD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18.3 Test purpose | To confirm that if the UE receives a PHYSICAL CHANNEL RECONFIGURATION message before the UE reconfigures the radio bearer according to the previous PHYSICAL CHANNEL RECONFIGURATION message it ignores the new PHYSICAL CHANNEL RECONFIGURATION message and reconfigures according to the previous PHYSICAL CHANNEL RECONFIGURA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108
Test Procedure
The UE is in CELL_DCH state. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message to the UE to invoke the UE to tran... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.18.5 Test requirement | After step 2 the UE shall transit from CELL_DCH to CELL_FACH and transmit a PHYSICAL CHANNEL RECONFIGURATION message on the common physical channel.
After step 5 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19 Physical Channel Reconfiguration from CELL_DCH to CELL_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214;
1> act upon all received informatio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19.3 Test purpose | To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message and enter CELL_PCH state after it received a PHYSICAL CHANNEL RECONFIGURATION message, which invokes the UE to transit from CELL_DCH to CELL_PCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108
Test Procedure
The UE is in CELL_DCH state. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message, which invokes the UE to transit from CELL_DCH to CELL_PCH. The UE transmits a PHYSICAL CHANNEL REC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.19.5 Test requirement | After step 1 the UE shall transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20 Physical Channel Reconfiguration from CELL_DCH to URA_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message; or
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS 25.214;
1> act upon all received informatio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20.3 Test purpose | To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message and enter URA_PCH state after it received a PHYSICAL CHANNEL RECONFIGURATION message, which invokes the UE to transit from CELL_DCH to URA_PCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108
Test Procedure
The UE is in the CELL_DCH state. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message, which invoke the UE to transit from CELL_DCH to URA_PCH. The UE transmits a PHYSICAL CHANNEL R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.20.5 Test requirement | After step 1 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21 Physical Channel Reconfiguration from CELL_FACH to URA_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21.2 Conformance requirement | 1. In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
- transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC;
2. If the new state is CELL_PCH or URA_PCH, the response message shall be transmitted using the old... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21.3 Test purpose | 1. To verify that the UE, when receiving a PHYSICAL CHANNEL RECONFIGURATION message, responds by transmitting a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To verify that the response message is transmitted using the old configuration before the state transition, and that the U... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is in the CELL_FACH state. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message. The UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message to the SS using AM RLC a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.21.5 Test requirement | 1. After step 1 the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message to the UE on uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.22 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover to another frequency with timing maintain): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message:
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS25.214;
1> act upon all received information el... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23.3 Test purpose | To confirm that the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC, on a dedicated physical channel in a different frequency band. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 is active and cell 6 is inactive.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending to the CN domain(s) supported by the UE.
Test Procedure
Table 8.2.6.23
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.23.5 Test requirement | After step 4 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.24 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25 Physical channel reconfiguration for transition from CELL_DCH to CELL_FACH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS25.331 subclause 8.6, unless specified in the following and perform the actions below.
1> enter a state according to TS25.331 subclause 8.6.3.3.
If after state transition the UE ent... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25.3 Test purpose | 1. To confirm that the UE transits from CELL_DCH to CELL_FACH according to the PHYSICAL CHANNEL RECONFIGURATION message.
2. To confirm that the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a common physical channel in a different frequency. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive.
UE: "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108. If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mode on CS/PS" (state 7).
Test Procedure
Table 8.2.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.25.5 Test requirement | After step 4 the UE shall transmit a CELL UPDATE message on the CCCH in cell 6.
After step 6 the UE shall transmit a UTRAN MOBILITY INFORMATION CONFIRM message on the DCCH using AM RLC in cell 6.
After step 7 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 6.
A... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26 Physical Channel Reconfiguration from CELL_DCH to CELL_PCH (Frequency modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS25.214;
1> act upon all received information ele... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26.3 Test purpose | 1. To confirm that the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To confirm that the UE transits from CELL_DCH to CELL_PCH according to the PHYSICAL CHANNEL RECONFIGURATION message.
3. To confirm that the UE releases a dedicated physical channel and selects a com... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive
UE: "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108. If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mode on CS/PS" (state 7).
Test Procedure
Table 8.2.6... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.26.5 Test requirement | After step 4 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 1.
After step 5 the UE shall transmit a CELL UPDATE message on the CCCH with IE "Cell update cause" set to "cell reselection" in cell 6.
After step 8 the UE shall be in CELL_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27 Physical channel reconfiguration from CELL_FACH to CELL_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS25.214;
1> act upon all received information ele... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27.3 Test purpose | 1. To confirm that the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To confirm that the UE transits from CELL_FACH to CELL_PCH according to the PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27.4 Method of test | Initial Condition
System Simulator: 1 cell– Cell 1 is active.
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is in CELL_FACH state of cell 1. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message. The UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE messa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.27.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on uplink DCCH using AM RLC.
After step 4 the UE shall be in CELL_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Downlink channelisation code modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified in TS25.214;
1> act upon all received information el... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28.3 Test purpose | 1. To confirm that the UE change assigned downlink channelisation code by SS according to a PHYSICAL CHANNEL RECONFIGURATION message.
2. To confirm that the UE response PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending to the CN domain(s) supported by the UE.
Test Procedure
The UE is in CELL_DCH state of cell 1. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message to t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.28.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 4 the UE shall transmit a UE CAPABILITY INFORMATION message on the uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Compressed mode initiation): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> set the variable ORDERED_RECONFIGURATION to TRUE;
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure A as specified... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29.3 Test purpose | 1. To confirm that the UE activates compressed mode according to a PHYSICAL CHANNEL RECONFIGURATION message.
2. To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
3. To confirm that the UE deactivates compressed mode according to a PHYSICAL CHANNEL RECO... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 is active and cell 6 is inactive
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending to the CN domain(s) supported by the UE.
Test Procedure
Table 8.2.6.29
Parameter
Unit
Cell 1
Cell 6
T0
T1
T2
T3
T0
T1
T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.29.5 Test requirement | After step 3 the UE shall not send any MEASUREMENT REPORT messages on the uplink DCCH.
After step 5 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 6 the UE shall transmit a MEASUREMENT REPORT message containing the IE "measured results" reporting ce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Modify active set cell): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message:
it shall:
1> if the UE will enter the CELL_DCH state from any state other than CELL_DCH state at the conclusion of this procedure:
2> perform the physical layer synchronisation procedure as specified in TS25.214;
1> act upon all received information elem... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30.3 Test purpose | To confirm that the UE transmits PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC on a dedicated physical channel of same frequency in another cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30.4 Method of test | Initial Condition
System Simulator: 2 cells–Cells 1 is active and cell 6 is inactive.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) as specified in clause 7.4 of TS 34.108, depending to the CN domain(s) supported by the UE.
Test Procedure
Table 8.2.6.30
Parameter
Unit
Cell 1
Cell 2
T0
T1
T0
T1
UTRA ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.30.5 Test requirement | After step 4 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC in cell 2. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31 Physical channel reconfiguration transition from CELL_FACH to URA_PCH: Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS25.331 subclause 8.6, unless specified in the following and perform the actions below.
1> enter a state according to TS25.331 subclause 8.6.3.3.
In case the procedure was triggered ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31.3 Test purpose | 1. To confirm that the UE transmits the PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To confirm that the UE transits from CELL_FACH to URA_PCH according to the PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31.4 Method of test | Initial Condition
System Simulator: 1 cell– Cell 1 is active.
UE: PS-DCCH+DTCH_FACH (state 6-11) as specified in clause 7.4 of TS 34.108.
Test Procedure
The UE is in CELL_FACH state of cell 1. The SS transmits a PHYSICAL CHANNEL RECONFIGURATION message. The UE shall enter URA_PCH state according to this message after i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.31.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on uplink DCCH using AM RLC.
After step 4 the UE shall be in URA PCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32 Physical channel reconfiguration for transition from CELL_DCH to URA_PCH (Frequency band modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32.2 Conformance requirement | If the UE receives:
-a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> act upon all received information elements as specified in TS25.331 subclause 8.6, unless specified in the following and perform the actions below.
…
1> enter a state according to TS25.331 subclause 8.6.3.3.
In case the procedure was triggere... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32.3 Test purpose | 1. To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
2. To confirm that the UE transits from CELL_DCH to URA_PCH according to the PHYSICAL CHANNEL RECONFIGURATION message.
3. To confirm that the UE releases the dedicated physical channel and selects a ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive
UE: "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE If the UE supports both CS and PS domains, the initial UE state shall be "Registered idle mod... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.32.5 Test requirement | After step 3 the UE shall transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 1.
After step 8 the UE shall be in URA_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.33 Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH (Frequency band modification): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.33.1 Definition |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.