hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50 Physical Channel Reconfiguration for transition from CELL_DCH to URA_PCH: Success (frequency modification, stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50.1 Definition | All UEs which support FDD or TDD, HS-PDSCH and E-DPDCH or E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are m... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50.3 Test purpose | To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC;
To confirm that the UE transits from CELL_DCH with active E-DCH transmission and HS-HSCH reception to URA_PCH state on a different frequency after it received a PHYSICAL CHANNEL RECONFIGURATION message;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50.4 Method of test | Initial Condition
System Simulator: 2 cells– Cell 1 and cell 6 are active.
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A12 in cell 1 as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH(FDD only) or E-PUCH (TDD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.50.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 1.
After step 3 the UE shall be in URA_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51 Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (serving E-DCH cell change) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH and E-DPDCH or E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable E_DCH_TRANSMISSION shall be set to "TRUE" only when all the following conditions are m... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51.3 Test purpose | To confirm that the UE changes the serving E-DCH cell according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A13, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only) or E-PUCH (TDD only)
Test Procedu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.51.5 Test requirements | After step 0a, the UE shall transmit a MEASUREMENT REPORT message (FDD only).
After step 3, the UE shall transmit a MEASUREMENT REPORT message. This step doesn’t apply for 1.28 Mcps TDD.
After step 5, the UE shall transmit a MEASUREMENT REPORT message.
After step 8, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURAT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Timing re-initialized hard handover to another frequency, Serving E-DCH cell change, compressed mode) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52.1 Definition | All UEs which support FDD, HS-PDSCH, E-DPDCH and fully support F-DPCH and all UEs which support TDD and HS-PDSCH and E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> set the variable ORDERED_RECONFIGURATION to TRUE;
…
1> act upon all received information elements as specified in TS25.331 subclause 8.6, unless specified in the following and perform the actions below.
…
1> enter a state according to TS25.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52.3 Test purpose | To confirm that the UE is able to perform a timing re-initialised hard handover to another frequency after compressed mode measurement on the target frequency in conjunction with a serving E-DCH cell change according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 and cell 6 are active
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A14 in cell 1 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only)
- UE fully sup... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.52.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC (FDD only).
After step 5 the UE shall transmit a MEASUREMENT REPORT message containing the IE "measured results" reporting cell 6's CPICH RSCP and Ec/No values, also report the triggering of event '2b'... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.53 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54 Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Failure (Timing re-initialized hard handover, Serving E-DCH cell change, physical channel failure and reversion to old channel) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54.1 Definition and applicability | All UEs which support FDD or TDD and HS-PDSCH and E-DPDCH or E-PUCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54.2 Conformance requirement | If the received message caused the UE to be in CELL_DCH state and the UE according to subclause 8.5.4 failed to establish the dedicated physical channel(s) indicated in the received message or for 3.84 Mcps TDD and 7.68 Mcps TDD failed to establish the physical channel(s) indicated in the received message to which DCCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54.3 Test purpose | To confirm that the UE reverts to the old E-DCH / HS-DSCH configuration and transmits a PHYSICAL CHANNEL RECONFIGURATION FAILURE message if the UE fails to reconfigure the new physical channel according to the received PHYSICAL CHANNEL RECONFIGURATION message before the expiry of timer T312. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 & Cell 6.
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A13, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH (FDD only) or E-PUCH (TDD only)
Test Procedure
The... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.54.5 Test requirements | After step 2, the UE shall revert to the old E-DCH / HS-DSCH configuration on Cell 1 and transmit a PHYSICAL CHANNEL RECONFIGURATION FAILURE message.
8.2.6.54a Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Failure (Timing re-initialized hard handover, Serving E-DCH and HS-DSCH cell change w... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start of discontinuous uplink transmission and downlink reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
….
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfigur... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55.3 Test purpose | To confirm that the UE reconfigures the physical layer to perform discontinuous uplink DPCCH transmission and enable discontinuous downlink reception operations according to the IE DTX_DRX_Information received in PHYSICAL CHANNEL RECONFIGURATION message from the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A14 in cell 1 as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission
Test Procedure
The UE is in state 6-18 under condition A14 a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.55.5 Test requirements | After step 1, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 3 the time between 11 consecutive CQI indications shall be 320ms if 2ms TTI is used, or 400ms if 10ms TTI is used.
After step 3, the UE shall be in Cell_DCH state |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start of HS-SCCH less operation) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56.1 Definition and applicability | All UEs, which support FDD and HS-SCCH less. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
….
If the UE receives RRC CONNECTION SETUP, ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfigur... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56.3 Test purpose | To confirm that the UE reconfigures the physical layer to perform HS-SCCH less operation according to the IE HS-SCCH less information received in PHYSICAL CHANNEL RECONFIGURATION message from the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A14 in cell 1 as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statements
- UE supports FDD
- UE supports HS-SCCHless HS-DSCH
Test Procedure
The UE is in state 6-18 under condition A14 as specified in ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.56.5 Test requirements | After step 1, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 2, the UE shall be in Cell_DCH state |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57 Physical Channel Reconfiguration for transition from CELL_DCH to URA_PCH: Success (frequency modification, stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57.1 Definition | All UEs, which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable DTX_DRX_STATUS shall be set to TRUE only when all the following conditions are met:
1>... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57.3 Test purpose | To confirm that the UE transmits a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC;
To confirm that the UE transits from CELL_DCH with UL DTX and DL DRX configured to URA_PCH state on a different frequency after it received a PHYSICAL CHANNEL RECONFIGURATION message;
To confirm that th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57.4 Method of test | Initial Condition
System Simulator: 2 cells– Cell 1 and cell 6 are active.
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A20 in cell 1 as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission.
Test Procedure
Table 8.2.6.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.57.5 Test requirement | At step 3 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the DCCH using AM RLC in cell 1.
At step 4 the UE shall be in URA_PCH state in cell 6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58 Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (serving E-DCH cell change with discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58.1 Definition and applicability | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58.2 Conformance requirement | In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE as response message on the uplink DCCH using AM RLC.
…
The variable DTX_DRX_STATUS shall be set to TRUE only when all the following conditions are met:
1>... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58.3 Test purpose | To confirm that the UE changes the serving E-DCH cell with discontinuous uplink transmission according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission.
Test Procedure
Table 8.2.6.58
Parameter
Unit
Ce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.58.5 Test requirements | At step 1, the UE shall transmit a MEASUREMENT REPORT message.
At step 6, the UE shall transmit a MEASUREMENT REPORT message.
At step 8, the UE shall transmit a MEASUREMENT REPORT message.
At step 11, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message.
At step 12 the time between 11 consecutive C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.59 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Timing re-initialized hard handover to another frequency, Serving E-DCH cell change with discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.59.1 Definition | All UEs, which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.59.2 Conformance requirement | If the UE receives:
- a PHYSICAL CHANNEL RECONFIGURATION message;
it shall:
1> set the variable ORDERED_RECONFIGURATION to TRUE;
…
1> act upon all received information elements as specified in TS25.331 subclause 8.6, unless specified in the following and perform the actions below.
…
1> enter a state according to TS25.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.59.3 Test purpose | To confirm that the UE is able to perform a timing re-initialized hard handover to another frequency after compressed mode measurement on the target frequency in conjunction with a serving E-DCH cell change and UL DTX configured according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.59.4 Method of test | Initial Condition
System Simulator: 2 cells–Cell 1 and cell 6 are active
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A20 in cell 1 as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission
Test Procedure
Table 8.2.6.59... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60 Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Failure (Timing re-initialised hard handover, Serving E-DCH cell change with discontinuous uplink transmission, physical channel failure and reversion to old channel) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60.1 Definition | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60.2 Conformance requirement | If the received message caused the UE to be in CELL_DCH state and the UE according to subclause 8.5.4 failed to establish the dedicated physical channel(s) indicated in the received message or for 3.84 Mcps TDD and 7.68 Mcps TDD failed to establish the physical channel(s) indicated in the received message to which DCCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60.3 Test purpose | To confirm that the UE reverts to the old E-DCH / HS-DSCH configuration with UL DTX and transmits a PHYSICAL CHANNEL RECONFIGURATION FAILURE message if the UE fails to reconfigure the new physical channel according to the received PHYSICAL CHANNEL RECONFIGURATION message before the expiry of timer T312. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 & Cell 6.
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission.
Test Procedure
The UE is in the CELL_DCH state and ha... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.60.5 Test requirements | At step 3, the UE shall revert to the old E-DCH / HS-DSCH configuration on Cell 1 and transmit a PHYSICAL CHANNEL RECONFIGURATION FAILURE message.
At step 4 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (CQI reporting reduction) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61.1 Definition and applicability | All UEs, which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61.2 Conformance requirement | If the IE "Measurement Feedback Info" is included and the UE will be in CELL_DCH state after completion of this procedure, the UE shall:
1> store the received configuration;
1> determine the value for the HS_DSCH_RECEPTION variable and take the corresponding actions as described in subclause 8.5.25.
When the variable ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61.3 Test purposes | 1. To confirm that the UE correctly performs the HS-DPCCH CQI reporting procedure using some of the extended values for the IE CQI feedback cycle, according to the received RADIO BEARER SETUP message.
2. To confirm that the UE correctly performs the CQI reporting reduction procedure according to the received PHYSICAL C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH (state 6-7) with SRBs mapped to E-DCH/HS-DSCH as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission
Test Procedure
The UE is in CELL_DCH state. Only signalling radio bearers have been... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.61.5 Test requirements | After step 1, the UE shall transmit a RADIO BEARER SETUP COMPLETE message on the uplink DCCH using AM RLC.
After step 2, the UE shall transmit CQI reports every 64 ms. The time between 11 consecutive CQI reports shall be 640 ms (verifies test purpose 1).
After step 4, the UE shall transmit a PHYSICAL CHANNEL RECONFIGUR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.62 Physical Channel Reconfiguration from CELL_DCH to CELL_DCH: Success (activation and de-activation of 64QAM) | 8.2.6.62.1 Definition and Applicability
All UEs which support FDD, mac-ehs and 64QAM
8.2.6.62.2 Conformance Requirement
In case the procedure was triggered by reception of a PHYSICAL CHANNEL RECONFIGURATION message, the UE shall:
1> transmit a PHYSICAL CHANNEL COMPLETE as response message on the uplink DCCH using A... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.62.3 Test purpose | 1. To confirm that the UE starts HS-DSCH transmission using DL 64QAM mode according to PHYSICAL CHANNEL RECONFIGURATION message on DCCH.
2. To confirm that the UE stops HS-DSCH transmission using DL 64QAM mode according to PHYSICAL CHANNEL RECONFIGURATION message on DCCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.62.4 Method of test | Initial conditions
System Simulator:
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A17b, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports MAC-ehs and 64QAM
- UE fully supports F-DPCH
Test Procedure
The UE is initially in CELL_DCH state with the SRBs an... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.62.5 Test requirements | After step 1 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 3 the UE should receive UE CAPABILITY ENQUIRY mapped on DL 64QAM HS-DSCH(mac-ehs)
At step 5 the UE should receive UE CAPABILITY INFORMATION CONFIRM mapped on DL 64QAM HS-DSCH(mac-ehs)
After st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63 Physical Channel Reconfiguration from CELL_DCH to CELL_DCH: Success (Timing re-initialised hard handover to another frequency, Serving HS-DSCH cell change with MIMO enabled) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63.1 Definition and applicability | All UEs which support FDD and MIMO. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63.2 Conformance requirement | Extract from 25.331
1> if any IEs related to MIMO are stored in the UE:
2> determine the value for the MIMO_STATUS variable and take the corresponding actions as described in subclause 8.5.33.
[…]
If the UE receives an ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> if the IE "MIMO parameters... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63.3 Test purpose | 1. To confirm that the UE is able to perform a timing re-initialised hard handover to another frequency without prior measurement on the target frequency in conjunction with a serving HS-DSCH cell change and with MIMO enabled according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63.4 Method of test | Initial Condition
System Simulator: 2 cells –2 cells - Cell 1 on frequency f1, and cell2 on frequency f2. Cells 1 and 2 have different primary scrambling codes (FDD only)
UE: PS-DCCH DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports MIMO
Test Procedur... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.63.5 Test requirements | At step 2, the UE shall transmit a RADIO SETUPCOMPLETE message on the uplink DCCH using AM RLC.
At step 4, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 6, the UE shall transmit UE CAPABILITY INFORMATION on the uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64 Physical channel reconfigurations for transition from CELL_DCH to CELL_DCH (activation and de-activation of UL 16QAM ): Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64.1 Definition and applicability | All UEs which support FDD and UL 16QAM |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64.2 Conformance requirement | If the IE "E-DCH Info" is included and the UE will be in CELL_DCH state after completion of this procedure, the UE shall:
1> for FDD:
2> if the IE "E-DPCCH Info" is included:
3> store the newly received E-DPCCH configuration.
2> if the IE "E-DPDCH Info" is included:
3> store the newly received E-DPDCH configuration.
2>... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64.3 Test purpose | 1. To confirm that the UE starts E-DCH transmission using UL 16QAM mode according to PHYSICAL CHANNEL RECONFIGURATION message on DCCH.
2. To confirm that the UE stops E-DCH transmission using UL 16QAM mode according to PHYSICAL CHANNEL RECONFIGURATION message on DCCH |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64.4 Method of test | Initial Condition
System Simulator: 1 cell.
UE: Idle state (State 3 or State 7) as specified in clause 7.4 of TS 34.108.Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports HS-PDSCH
- UE supports UL 16QAM
- UE fully supports F-DPCH
Test Procedure
The UE is brought to the CELL_DCH state after a successful inco... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.64.5 Test requirement | After step 2 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 4 the UE should use UL 16QAM E-DCH transmission for the data loopback test.
After step 6 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65 Physical Channel Reconfiguration from CELL_DCH to CELL_DCH: Success (Timing re-initialised hard handover to another frequency, Serving HS-DSCH cell change with 64QAM and MIMO enabled) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65.1 Definition and applicability | UE category supports combined 64QAM and MIMO activation. UE support FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65.2 Conformance requiremen | Extract from 25.331
1> if any IEs related to MIMO are stored in the UE:
2> determine the value for the MIMO_STATUS variable and take the corresponding actions as described in subclause 8.5.33.
[…]
If the UE receives an ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> if the IE "MIMO parameters... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65.3 Test purpose | 2. To confirm that the UE is able to perform a timing re-initialised hard handover to another frequency without prior measurement on the target frequency in conjunction with a serving HS-DSCH cell change and with MIMO and 64QAM enabled according to the received PHYSICAL CHANNEL RECONFIGURATION message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65.4 Method of test | Initial Condition
System Simulator: 2 cells –2 cells - Cell 1 on frequency f1, and Cell 6 on frequency f2. Cells 1 and 6 have different primary scrambling codes (FDD only)
UE: PS-DCCH DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE category supports combined... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.65.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER SETUP COMPLETE message on the uplink DCCH using AM RLC.
At step 4, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 7, the UE shall transmit UE CAPABILITY INFORMATION on the uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66 Physical Channel Reconfiguration from CELL_PCH to CELL_FACH: Success (autonomous transitions without cell update procedure) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66.1 Definition and applicability | UE supports FDD and Enhanced Uplink in CELL_FACH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66.2 Conformance requirement | Extract from 25.331
This procedure is used to transmit paging information to selected UEs in idle mode, CELL_PCH or URA_PCH state using the paging control channel (PCCH). Upper layers in the network may request paging, to e.g. establish a signalling connection. UTRAN may initiate paging for UEs in CELL_PCH or URA_PCH s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66.3 Test purpose | 1. To confirm that UE performs transition from CELL_PCH to CELL_FACH state without the cell update procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66.4 Method of test | Initial Condition
System Simulator: 1 cell.
For system information block 5 see specific message contents.
UE: UE: PS-DCCH Enhanced CELL_FACH (state 6-8) as specified in clause 7.4 of TS 34.108 with SRB mapping on common E-DCH /HS-DSCH
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports of common E-DCH
Test Pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.66.5 Test requirement | 1. After paging type 1 reception the UE transits to CELL-FACH state without performing a cell update procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67 Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Start of SPS operation without initial SPS resource) (1.28 Mcps TDD) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67.1 Definition and applicability | All UEs which support TDD and SPS operation. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67.2 Conformance requirement | If the UE receives RRC CONNECTION SETUP, CELL UPDATE CONFIRM, or any reconfiguration message:
1> the UE shall determine the value for the HS_DSCH_SPS_STATUS variable.
The variable HS_DSCH_SPS_STATUS shall be set to TRUE only when all the following conditions are met:
1> the UE is in CELL_DCH state;
1> the variable HS_D... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67.3 Test purpose | To confirm that the UE reconfigures the physical layer to perform SPS operation according to the IE E-DCH SPS Information and HS-DSCH SPS Information received in PHYSICAL CHANNEL RECONFIGURATION message from the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67.4 Method of test | Initial Condition
System Simulator: 1 cell
UE: PS-DCCH +DTCH_HS-DSCH +DTCH_E-DCH (state 6-18) under condition A13 in cell 1 as specified in clause 7.4 of TS 34.108
Related ICS/IXIT statement(s)
- UE supports TDD
- UE supports SPS operation
Test Procedure
The UE is in state 6-18 under condition A13 as specified in TS 34... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.2.6.67.5 Test requirements | After step 1, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 2, the UE shall be in Cell_DCH state. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.